Upload
phungdiep
View
215
Download
0
Embed Size (px)
Citation preview
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
U.S. Consulate General
Karachi, Pakistan
Date: December 27, 2017
To: Offeror Page 1of 12
Request Number: PR6859665
From: Procurement & Contracting Department
U.S. Consulate General
Plot No- 3, 4, 5, New TPX, Area
Mai Kolachi Road
Karachi, Pakistan.
E-mail: [email protected]; [email protected]
POC: Mairaj Uddin Phone: 92-21-35275000
_________________________________________________________________________
The U.S. Consulate Karachi requires following items for FM, section and requests your
participation in quoting for the said items. Please provide us cost, shipping charges and estimated
delivery period of the following items to Dispatch Agency address at IKUN, LLC , 2801, Rouite-
130, Unit1, North Brunswick, NJ 08902, United State.
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
Item Description:
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
Prices:
Frim Fixed Price.
TAX: Your prices shall be duty/tax free. U.S. Consulate General Karachi will neither deduct nor
pay any tax for this service.
Inspection & Acceptance:
A Government representative will inspect the service(s) delivered to determine the quality and
acceptability. Substandard services/products shall be unacceptable at vendor’s expense.
Payment Terms:
Payment will be made within 30 days through Electronic Funds Transfer (EFT) upon complete
delivery to the US Consulate General, Karachi and submission of legitimate invoice to Financial
Section after delivery, and submission of receipt.
SUBMISSION OF INVOICE:
Each invoice shall include vendor invoice number, purchase order/contract number, date issued,
brief description of supplies/services provided, quantities, unit and total price, and signed by the
signing authority.
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
Invoices must be routed to:
1. One original invoice in pdf format to the Financial Management Center to
2. One copy clearly marked “DUPLICATE Copy for Proc & Contracting.
Although email is the preferred method, invoices may also be submitted by mail (do not send
electronically if you mail the invoice to the following address to avoid duplication):
Karachi Fiscal Office
U.S. Consulate General
Plot No- 3, 4, 5, New TPX Are
Mai Kolachi Road
Karachi
For payment related queries contractor will contact Karachi Fiscal Office
[email protected]. Contracting Officer takes no responsibility for payment and/or
associated queries.
Contract Clauses:
FAR & DOSAR (attached) clauses will apply to this purchase order. These clauses can be
accessed through following link:
http://aopepd.a.state.gov/Content/documents/overseas_comm-item-fac-2005-36.docx
52.249-2 Termination for Convenience of the Government (Fixed-Price)
(MAY 2004) Alternate I (APR 1984)
52.212-4 Contract Terms and Conditions--Commercial Items (May 2015)
52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders--
Commercial Items (Feb 2016)
U.S. CONSULATE GENERAL, KARACHI.
PR6859665 - KHI-FM: EXHAUST FANS FOR PHASE-II & PHASE-III
Offer Due Date:
1. Please submit your quote on or before January 12, 2018 to Procurement Contracting
Officer, U.S. Consulate General Karachi, or via Email.
No quote will be acceptable after the due date.
2. Please prepare a quotation on your company letterhead in accordance with the requested
details of this RFQ.
3. Please provide reference of our Request Number PR6859665 in all your correspondence
regarding this request for price quotation
MARK: H-EXH-101
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
BC
ODA
Sq.
Inlet ViewODA
D
Discharge ViewODA
AOD E
SQN-DCentrifugal Square InlineDirect Drive
STANDARD CONSTRUCTION FEATURES:All aluminum wheel - Galvanized steel housing - Three
removable access doors - Closed cell neoprene
gasketing - Inlet and discharge duct collars - Universal
mounting feet - Permanently lubricated motor - Transit
tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power(HP)
1 150SQN10D 497 62.5 748 .091
Performance
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure
1/3 1075 115/1/50 ODP -SE
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
60 61 61 59 55 49 42 36 60 49 4.5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PREWIREDBD-20 DAMPERFAN SPEED CONTROLLER 5 AMP 120 VOLT220V/1PH/50HZ MTR UPGRADEFAN SPEED CONTROLLER
A 20
B 21-7/8
C 23-7/8
D Sq. 23
E 25-1/16
Shipping Weight(lbs)*** 182
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
30
60
90
120
150
0.00
.020
.040
.060
.080
.100
0 150 300 450 600 750
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 1 of 27
MARK: H-EXH-401
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
T Sq.
B
G
AC
ACRU-HPUpblast CentrifugalExhaust VentilatorRoof Mounted/Belt Drive
STANDARD CONSTRUCTION FEATURES:All aluminum housing - Backward inclined all aluminum wheel - Two
piece top cap with stainless steel quick release latches - One piece
bottom spinning - Welded curb cap corners - Birdscreen - Vibration
isolators - Lifting Lugs - Permanently lubricated ball bearing motors -
Static resistant belts - Adjustable pitch drives through 5 hp motor -
Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow
block housing, rated at 200,000 hours average life - All fans factory
adjusted to specified fan RPM - Transit tested packaging. Standard
motors ship factory installed.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 150RH4B 288 124 1011 .126
Performance (*Bhp includes 18% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
1/3 1425 220/1/50 TEFC -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
67 60 58 55 58 58 50 44 62 51 5.8
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PREWIREDBD-18 DAMPERROOF CURB RCA 22-17.72H -LESS NLR W/TRAYALUMINUM BIRDSCREENSPARE BELT SET1/3 HP 220V/1PH/50HZ TEFC CL F 50 DEG C 1425 RPM MTR
A 20-15/16
B 34-11/16
C 27-1/2
G 2
T Sq. 24
Roof Open. Sq.* 19-1/2
Shipping Weight(lbs)*** 140
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
* Roof opening size for curbs supplied by Cook only.***Includes fan, motor & accessories.
0
40
80
120
160
200
0.00
.033
.067
.100
.134
.167
0 100 200 300 400 500
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 2 of 27
MARK: H-EXH-415
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
T Sq.
B
G
AC
ACRU-HPUpblast CentrifugalExhaust VentilatorRoof Mounted/Belt Drive
STANDARD CONSTRUCTION FEATURES:All aluminum housing - Backward inclined all aluminum wheel - Two
piece top cap with stainless steel quick release latches - One piece
bottom spinning - Welded curb cap corners - Birdscreen - Vibration
isolators - Lifting Lugs - Permanently lubricated ball bearing motors -
Static resistant belts - Adjustable pitch drives through 5 hp motor -
Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow
block housing, rated at 200,000 hours average life - All fans factory
adjusted to specified fan RPM - Transit tested packaging. Standard
motors ship factory installed.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 150RH4B 283 249 1289 .246
Performance (*Bhp includes 16% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
1/3 1425 220/1/50 TEFC -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
80 67 64 60 60 68 56 52 70 59 9.8
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PREWIREDBD-18 DAMPERROOF CURB RCA 22-17.72H -LESS NLR W/TRAYALUMINUM BIRDSCREENSPARE BELT SET1/3 HP 220V/1PH/50HZ TEFC CL F 50 DEG C 1425 RPM MTR
A 20-15/16
B 34-11/16
C 27-1/2
G 2
T Sq. 24
Roof Open. Sq.* 19-1/2
Shipping Weight(lbs)*** 140
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
* Roof opening size for curbs supplied by Cook only.***Includes fan, motor & accessories.
0
60
120
180
240
300
0.00
.067
.134
.200
.267
.334
0 120 240 360 480 600
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 3 of 27
MARK: H-EXH-416
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
A
T Sq. G
B
C
VCRUpblast CentrifugalExhaust VentilatorRoof Mounted/Belt Drive
STANDARD CONSTRUCTION FEATURES:All aluminum housing - Backward inclined all aluminum wheel - Two
piece top cap with stainless steel quick release latches - One piece bottom
spinning - Welded curb cap corners - Lifting Lugs - Permanently
lubricated ball bearing motors - Static resistant belts - Adjustable pitch
drives through 5 hp motor - Corrosion resistant fasteners - Regreasable
bearings in cast iron pillow block housing, rated at 200,000 hours average
life - All fans factory adjusted to specified fan RPM - Transit tested
packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 180V7B 1062 249 1010 .699
Performance (*Bhp includes 11% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
1 1425 415/3/50 TEFC -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
70 77 76 69 62 61 56 53 72 60 10.6
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:PRE-WIRED STD DISCONNECT NEMA 3ROOF CURB RCA 28-17.72H -LESS NLRUL762 (327Y-300DEG)SPARE BELT SET
A 24-13/16
B 39-7/16
C 35-7/8
G 3
T Sq. 30
Roof Open. Sq.* 25-1/2
Shipping Weight(lbs)*** 171
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
* Roof opening size for curbs supplied by Cook only.***Includes fan, motor & accessories.
0
60
120
180
240
300
0.00
.150
.300
.450
.600
.750
0 400 800 1200 1600 2000
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve(MaxRPM Non-Reinforced Wheel = 1610)
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 4 of 27
MARK: H-EXH-417
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
T Sq.
B
G
A
C
ACE-BDownblast CentrifugalExhaust VentilatorRoof Mounted/Belt Drive
STANDARD CONSTRUCTION FEATURES:All aluminum housing - Backward inclined all aluminum wheel - Two
piece top cap with stainless steel quick release latches - Welded curb
cap corners - Birdscreen - Vibration isolators - Lifting Lugs -
Permanently lubricated ball bearing motors - Static resistant belts -
Adjustable pitch drives through 5 hp motor - Corrosion resistant
fasteners - Regreasable bearings in a cast iron pillow block housing,
rated at 200,000 hours average life - All fans factory adjusted to specified
fan RPM -Transit tested packaging - Standard motors ship factory
installed.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 120C4B 274 124 1169 .091
Performance (*Bhp includes 18% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
1/3 1425 220/1/50 TEFC -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
64 66 69 60 57 54 48 44 64 53 6.5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:WHEEL REDUCED 33% - BANDEDSTD DISCONNECT PREWIREDBD-14 DAMPERROOF CURB RCA 18-17.72H -LESS NLR W/TRAYALUMINUM BIRDSCREENSPARE BELT SET1/3 HP 220V/1PH/50HZ TEFC CL F 50 DEG C 1425 RPM MTRADDER FOR MOTOR FIT
A 1-13/16
B 28-7/16
C 26-7/8
G 2
T Sq. 20
Roof Open.Sq.* 15-1/2
Shipping Weight(lbs)*** 121
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
*Roof opening size for curbs supplied by Cook only.***Includes fan, motor & accessories.
0
40
80
120
160
200
0.00
.020
.040
.060
.080
.100
0 80.0 160 240 320 400
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 5 of 27
MARK: H-EXH-426
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
T Sq.
B
G
AC
ACRU-BUpblast CentrifugalExhaust VentilatorRoof Mounted/Belt Drive
STANDARD CONSTRUCTION FEATURES:All aluminum housing - Backward inclined all aluminum wheel - Two
piece top cap with stainless steel quick release latches - One piece
bottom spinning - Welded curb cap corners - Birdscreen - Vibration
isolators - Lifting Lugs - Permanently lubricated ball bearing motors -
Static resistant belts - Adjustable pitch drives through 5 hp motor -
Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow
block housing, rated at 200,000 hours average life - All fans factory
adjusted to specified fan RPM - Transit tested packaging. Standard
motors ship factory installed.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 150R4B 576 124 908 .190
Performance (*Bhp includes 17% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
1/3 1425 220/1/50 TEFC -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
75 74 68 60 59 54 50 47 65 54 7.4
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PREWIREDROOF CURB RCA 22-17.72H -LESS NLR W/TRAYSPARE BELT SET1/3 HP 220V/1PH/50HZ TEFC CL F 50 DEG C 1425 RPM MTR
A 20-15/16
B 34-11/16
C 30-1/4
G 2
T Sq. 24
Roof Open. Sq.* 19-1/2
Shipping Weight(lbs)*** 136
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
* Roof opening size for curbs supplied by Cook only.***Includes fan, motor & accessories.
0
30
60
90
120
150
0.00
.050
.100
.150
.200
.250
0 200 400 600 800 1000
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 6 of 27
MARK: H-EXH-427
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
T Sq.
B
G
A
C
ACSCUpblast CentrifugalExhaust VentilatorRoof Mounted/Belt Drive
STANDARD CONSTRUCTION FEATURES:Aluminum spun housing - Backward inclined all steel wheel - Two
piece top cap with stainless steel quick release latches - One piece
bottom spinning - Steel curb cap with welded corners - Birdscreen -
Lifting Lugs - Permanently lubricated ball bearing motors - Dual static
resistant belts sized for 150% of motor horsepower - Adjustable
pitch drives through 5 hp motor - Corrosion resistant fasteners -
Regreasable bearings in a cast iron pillow block housing, rated at
200,000 hours average life - All fans factory adjusted to specified
fan RPM - Transit tested packaging - Standard motors ship factory
installed. UL LISTED AS 'POWER VENTILATORS FOR SMOKE
CONTROL SYSTEMS.' UL Listed and designed to withstand
temperatures of 500 degrees for 4 hours and 1000 degrees for 15
minutes.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 300SC11B 6411 249 872 5.47
Performance (*Bhp includes 5% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
5 1425 415/3/50 TEFC -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
89 93 92 87 78 76 70 64 88 77 27
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:REINFORCED WHEELPRE-WIRED STD DISCONNECT NEMA 3ROOF CURB RCA 34-17.72H -LESS NLRSPARE BELT SET
A 33-7/8
B 54-1/4
C 49-15/16
G 3
T Sq. 36
Roof Open.Sq.* 31-1/2
Shipping Weight(lbs)*** 604
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
*Roof opening size for curbs supplied by Cook only.***Includes fan, motor & accessories.
0
120
240
360
480
600
0.00
1.50
3.00
4.50
6.00
7.50
0 2000 4000 6000 8000 10000
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 7 of 27
MARK: OAF-101
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
ACB
A D
E Max.
Inlet View Discharge View
A
A
OD
OD
OD
OD Sq.
SQN-BCentrifugal Square InlineBelt Drive
STANDARD CONSTRUCTION FEATURES:All aluminum wheel - Galvanized steel housing -
Three removable access doors - Closed cell
neoprene gasketing - Inlet and discharge duct collars -
Universal mounting feet - Regreasable bearings in a
cast housing rated at 200,000 hours average life -
Permanently lubricated ball bearing motor - Adjustable
pitch drives through 5 HP - All fans factory adjusted
to specified fan RPM - Transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 150SQN-B 1006 124 1201 .473
Performance (*Bhp includes 13% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
3/4 1425 415/3/50 TEFC -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
74 75 79 77 69 68 62 56 77 66 13.5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PREWIREDBD-20 DAMPERSPARE BELT SET
A 20
B 21-7/8
C 23-7/8
D 23
E 12-3/4
MaxMtrFrm 145T
Shipping Weight(lbs)*** 195
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
60
120
180
240
300
0.00
.100
.200
.300
.400
.500
0 300 600 900 1200 1500
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 8 of 27
MARK: OAF-102
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
ACB
A D
E Max.
Inlet View Discharge View
A
A
OD
OD
OD
OD Sq.
SQN-BCentrifugal Square InlineBelt Drive
STANDARD CONSTRUCTION FEATURES:All aluminum wheel - Galvanized steel housing -
Three removable access doors - Closed cell
neoprene gasketing - Inlet and discharge duct collars -
Universal mounting feet - Regreasable bearings in a
cast housing rated at 200,000 hours average life -
Permanently lubricated ball bearing motor - Adjustable
pitch drives through 5 HP - All fans factory adjusted
to specified fan RPM - Transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 100SQN-B 288 124 1599 .155
Performance (*Bhp includes 17% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
1/3 1425 220/1/50 TEFC -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
71 68 70 69 64 61 57 51 70 59 8.9
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PREWIREDBD-12 DAMPERSPARE BELT SET1/3 HP 220V/1PH/50HZ TEFC CL F 50 DEG C 1425 RPM MTR
A 12
B 20
C 22
D 14
E 12-1/2
MaxMtrFrm 143T
Shipping Weight(lbs)*** 129
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
40
80
120
160
200
0.00
.033
.067
.100
.134
.167
0 100 200 300 400 500
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 9 of 27
MARK: H-EXH-501
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
T Sq.
B
G
A
C
ACE-BDownblast CentrifugalExhaust VentilatorRoof Mounted/Belt Drive
STANDARD CONSTRUCTION FEATURES:All aluminum housing - Backward inclined all aluminum wheel - Two
piece top cap with stainless steel quick release latches - Welded curb
cap corners - Birdscreen - Vibration isolators - Lifting Lugs -
Permanently lubricated ball bearing motors - Static resistant belts -
Adjustable pitch drives through 5 hp motor - Corrosion resistant
fasteners - Regreasable bearings in a cast iron pillow block housing,
rated at 200,000 hours average life - All fans factory adjusted to specified
fan RPM -Transit tested packaging - Standard motors ship factory
installed.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 150C5B 990 124 1208 .438
Performance (*Bhp includes 14% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
1/2 1425 220/1/50 TEFC -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
75 78 81 71 68 65 58 53 75 64 12.9
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PREWIREDBD-18 DAMPERROOF CURB RCA 22-17.72H -LESS NLR W/TRAYALUMINUM BIRDSCREENSPARE BELT SET1/2 HP 220V/1PH/50HZ TEFC CL F 50 DEG C 1425 RPM MTR
A 3-1/16
B 32-7/8
C 28-7/8
G 2
T Sq. 24
Roof Open.Sq.* 19-1/2
Shipping Weight(lbs)*** 140
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
*Roof opening size for curbs supplied by Cook only.***Includes fan, motor & accessories.
0
60
120
180
240
300
0.00
.100
.200
.300
.400
.500
0 250 500 750 1000 1250
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 10 of 27
MARK: M-EXH-101
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
F
E
D
N
Grille
J O.D. Discharge
B
H
K
Air Flow
Grille
LM
C
A
GEMINICeiling Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan wheel -
Injection molded flame resistant fan housing with round
outlet duct - 22 ga. galvanized steel inlet box - Isolation
mounted motor, mounted to one piece galvanized stamped
steel integral motor mount/inlet - Permanently lubricated 2-
speed motor with built-in thermal overload protection and
disconnect plug - Field wiring compartment with receptacle -
Adjustable prepunched mounting bracket - White, high
impact styrene injection molded grille - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GC-144 35.0 62.0 763 41
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .4
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
46 49 47 41 39 34 28 21 44 30 1.1 .7
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDWHITE PLASTIC GRILLEFAN SPEED CONTROLLER 5A 240V PREWIRED100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A Plastic 13-1/4
B Plastic 14-3/4
C 15-1/2
D 4
E 4
F 12
H 8-3/8
J 5-15/16
K 12-3/4
L 6-11/16
M 3-1/4
N 14
Shipping Weight(lbs)*** 19
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
30
60
90
120
150
0.00
20.0
40.0
60.0
80.0
100
0 10.0 20.0 30.0 40.0 50.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 11 of 27
MARK: M-EXH-102
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
F
E
D
N
Grille
J O.D. Discharge
B
H
K
Air Flow
Grille
LM
C
A
GEMINICeiling Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan wheel -
Injection molded flame resistant fan housing with round
outlet duct - 22 ga. galvanized steel inlet box - Isolation
mounted motor, mounted to one piece galvanized stamped
steel integral motor mount/inlet - Permanently lubricated 2-
speed motor with built-in thermal overload protection and
disconnect plug - Field wiring compartment with receptacle -
Adjustable prepunched mounting bracket - White, high
impact styrene injection molded grille - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GC-144 35.0 62.0 763 59
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .4
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
46 49 47 41 39 34 28 21 44 30 1.1 .7
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDWHITE PLASTIC GRILLEFAN SPEED CONTROLLER 5A 240V PREWIRED100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A Plastic 13-1/4
B Plastic 14-3/4
C 15-1/2
D 4
E 4
F 12
H 8-3/8
J 5-15/16
K 12-3/4
L 6-11/16
M 3-1/4
N 14
Shipping Weight(lbs)*** 19
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
30
60
90
120
150
0.00
20.0
40.0
60.0
80.0
100
0 10.0 20.0 30.0 40.0 50.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 12 of 27
MARK: M-EXH-103
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
F
E
D
N
Grille
J O.D. Discharge
B
H
K
Air Flow
Grille
LM
C
A
GEMINICeiling Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan wheel -
Injection molded flame resistant fan housing with round
outlet duct - 22 ga. galvanized steel inlet box - Isolation
mounted motor, mounted to one piece galvanized stamped
steel integral motor mount/inlet - Permanently lubricated 2-
speed motor with built-in thermal overload protection and
disconnect plug - Field wiring compartment with receptacle -
Adjustable prepunched mounting bracket - White, high
impact styrene injection molded grille - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GC-144 35.0 62.0 763 59
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .4
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
46 49 47 41 39 34 28 21 44 30 1.1 .7
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDWHITE PLASTIC GRILLEFAN SPEED CONTROLLER 5A 240V PREWIRED100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A Plastic 13-1/4
B Plastic 14-3/4
C 15-1/2
D 4
E 4
F 12
H 8-3/8
J 5-15/16
K 12-3/4
L 6-11/16
M 3-1/4
N 14
Shipping Weight(lbs)*** 19
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
30
60
90
120
150
0.00
20.0
40.0
60.0
80.0
100
0 10.0 20.0 30.0 40.0 50.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 13 of 27
MARK: M-EXH-107
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
OptionalFlange
Motor CoverOptional
Airflow
H DIA. 4-PLACES
G
B
EMax
D
C ODA OD
F
CG
EF
HA
D
B
View facing OutletMounting positionsare field adjustable
QMXMixed Flow InlineHorizontal MountBelt Drive
STANDARD CONSTRUCTION FEATURES:High efficiency mixed flow wheel - Continuously
welded steel housing with Lorenized powder coating -
Welded aerodynamic straightening vanes - Integral
inlet and outlet collars for slip fit duct connections -
Adjustable motor plate utilizing threaded studs for
positive belt tensioning - Heavy duty ball or roller
bearings with copper extended lube lines - Belt
guard - Lifting lugs - Adjustable mounting feet.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 150QMX 2920 745 2757 4.91
Performance (*Bhp includes 5% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Position Mounted
7-1/2 415/3/50 TEFC -SE E Yes
Motor Information
OVel(fpm) Fan Mount
2534 Horz. Ceiling
Fan Information
1 2 3 4 5 6 7 8 LwA
Inlet 80 84 87 84 83 81 79 76 88
Outlet 88 86 88 89 87 83 80 77 92
Sound Data Sound Power by Octave Band
v5.6.4.10443
Accessories:SPARE BELT SET415V/3PH/50HZ TEFC CL F 50 DEG C VFD COMPATIBLE MTR
A 21-3/8
B 30
C 24-3/8
D 13-3/16
E 42-1/16
F 18-3/4
G 28-5/8
H 1/2
Shaft Diam. 1-3/16
Shipping Weight(lbs)*** 471
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
460
920
1380
1840
2300
0.00
1.50
3.00
4.50
6.00
7.50
0 800 1600 2400 3200 4000
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 14 of 27
MARK: M-EXH-109
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
Air Flow
H O.D.
C
Discharge
GAir Flow
F
BB
A
(D x E)
Air Flow
Inlet
D
E
GEMINIInline Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan
wheel - Injection molded flame resistant fan housing
with round outlet duct - 22 ga. galvanized steel inlet box
- Permantly lubricated 2-speed motor with built-in
thermal overload protection and disconnect plug -
Isolation mounted motor, mounted to one piece
galvanized stamped steel integral motor mount/inlet -
Field wiring compartment with receptacle - Adjustable
prepunched mounting bracket - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GN-144 46.0 62.0 898 51
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .4
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
45 47 44 43 40 34 28 21 45 30 1.2 .8
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDFAN SPEED CONTROLLER 5 AMP 240 VOLT100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A 12
B 4
C 15-5/8
D 14
E 3-3/8
F 12-3/4
G 8-3/8
H O.D. 5-15/16
Shipping Weight(lbs)*** 18
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
40
80
120
160
200
0.00
20.0
40.0
60.0
80.0
100
0 15.0 30.0 45.0 60.0 75.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 15 of 27
MARK: C-EXH-101
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
Air Flow
H O.D.
C
Discharge
GAir Flow
F
BB
A
(D x E)
Air Flow
Inlet
D
E
GEMINIInline Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan
wheel - Injection molded flame resistant fan housing
with round outlet duct - 22 ga. galvanized steel inlet box
- Permantly lubricated 2-speed motor with built-in
thermal overload protection and disconnect plug -
Isolation mounted motor, mounted to one piece
galvanized stamped steel integral motor mount/inlet -
Field wiring compartment with receptacle - Adjustable
prepunched mounting bracket - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GN-144 47.0 31.0 858 74
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .4
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
43 46 43 40 37 32 26 18 42 28 .8 .5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDFAN SPEED CONTROLLER 5 AMP 240 VOLT100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A 12
B 4
C 15-5/8
D 14
E 3-3/8
F 12-3/4
G 8-3/8
H O.D. 5-15/16
Shipping Weight(lbs)*** 18
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
40
80
120
160
200
0.00
20.0
40.0
60.0
80.0
100
0 15.0 30.0 45.0 60.0 75.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 16 of 27
MARK: C-EXH-102
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
Air Flow
H O.D.
C
Discharge
GAir Flow
F
BB
A
(D x E)
Air Flow
Inlet
D
E
GEMINIInline Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan
wheel - Injection molded flame resistant fan housing
with round outlet duct - 22 ga. galvanized steel inlet box
- Permantly lubricated 2-speed motor with built-in
thermal overload protection and disconnect plug -
Isolation mounted motor, mounted to one piece
galvanized stamped steel integral motor mount/inlet -
Field wiring compartment with receptacle - Adjustable
prepunched mounting bracket - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GN-124 35.0 31.0 884 61
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .3
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
37 49 41 42 36 29 22 22 42 28 .9 .5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDFAN SPEED CONTROLLER 5 AMP 240 VOLT100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A 12
B 4
C 15-5/8
D 14
E 3-3/8
F 12-3/4
G 8-3/8
H O.D. 5-15/16
Shipping Weight(lbs)*** 16
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
50
100
150
200
250
0.00
20.0
40.0
60.0
80.0
100
0 10.0 20.0 30.0 40.0 50.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 17 of 27
MARK: C-EXH-103
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
Air Flow
H O.D.
C
Discharge
GAir Flow
F
BB
A
(D x E)
Air Flow
Inlet
D
E
GEMINIInline Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan
wheel - Injection molded flame resistant fan housing
with round outlet duct - 22 ga. galvanized steel inlet box
- Permantly lubricated 2-speed motor with built-in
thermal overload protection and disconnect plug -
Isolation mounted motor, mounted to one piece
galvanized stamped steel integral motor mount/inlet -
Field wiring compartment with receptacle - Adjustable
prepunched mounting bracket - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GN-144 47.0 31.0 858 74
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .4
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
43 46 43 40 37 32 26 18 42 28 .8 .5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDFAN SPEED CONTROLLER 5 AMP 240 VOLT100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A 12
B 4
C 15-5/8
D 14
E 3-3/8
F 12-3/4
G 8-3/8
H O.D. 5-15/16
Shipping Weight(lbs)*** 18
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
40
80
120
160
200
0.00
20.0
40.0
60.0
80.0
100
0 15.0 30.0 45.0 60.0 75.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 18 of 27
MARK: C-EXH-104
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
BC
ODA
Sq.
Inlet ViewODA
D
Discharge ViewODA
AOD E
SQN-DCentrifugal Square InlineDirect Drive
STANDARD CONSTRUCTION FEATURES:All aluminum wheel - Galvanized steel housing - Three
removable access doors - Closed cell neoprene
gasketing - Inlet and discharge duct collars - Universal
mounting feet - Permanently lubricated motor - Transit
tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
InputWatts
1 90SQN12D 130 62.0 1220 65
Performance
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure
1/6 1200 115/1/50 TENV -SE
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
60 62 64 57 54 49 45 42 60 49 5.0
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECTBD-12 DAMPERFAN SPEED CONTROLLER 5A 120V PREWIRED220V/50HZ MTR UPGRADE220 VOLT FSC UPGRADE
A 12
B 15
C 17
D Sq. 14
E 15-9/16
Shipping Weight(lbs)*** 94
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
30
60
90
120
150
0.00
20.0
40.0
60.0
80.0
100
0 50.0 100 150 200 250
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 19 of 27
MARK: C-EXH-105
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
BC
ODA
Sq.
Inlet ViewODA
D
Discharge ViewODA
AOD E
SQN-DCentrifugal Square InlineDirect Drive
STANDARD CONSTRUCTION FEATURES:All aluminum wheel - Galvanized steel housing - Three
removable access doors - Closed cell neoprene
gasketing - Inlet and discharge duct collars - Universal
mounting feet - Permanently lubricated motor - Transit
tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power(HP)
1 150SQN10D 556 93.0 873 .146
Performance
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure
1/3 1075 115/1/50 ODP -SE
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
61 66 64 63 59 55 46 39 65 53 6.0
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PREWIREDBD-20 DAMPERFAN SPEED CONTROLLER 5 AMP 120 VOLT220V/1PH/50HZ MTR UPGRADE220 VOLT FSC UPGRADE
A 20
B 21-7/8
C 23-7/8
D Sq. 23
E 25-1/16
Shipping Weight(lbs)*** 182
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
40
80
120
160
200
0.00
.033
.067
.100
.134
.167
0 200 400 600 800 1000
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 20 of 27
MARK: C-SF-101
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
BC
ODA
Sq.
Inlet ViewODA
D
Discharge ViewODA
AOD E
SQN-DCentrifugal Square InlineDirect Drive
STANDARD CONSTRUCTION FEATURES:All aluminum wheel - Galvanized steel housing - Three
removable access doors - Closed cell neoprene
gasketing - Inlet and discharge duct collars - Universal
mounting feet - Permanently lubricated motor - Transit
tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power(HP)
1 165SQN10D 453 93.0 791 .111
Performance
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure
1/2 1075 115/1/50 ODP -SE
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
63 65 66 62 60 56 51 49 65 53 6.5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:WHEEL REDUCED 33% - BANDEDSTD DISCONNECT PREWIREDBD-22 DAMPERFILTER BOX W/AL FLTRFAN SPEED CONTROLLER 10 AMP 120 VOLT220V/1PH/50HZ MTR UPGRADE220 VOLT FSC UPGRADE
A 22
B 25
C 27
D Sq. 25-5/16
E 27-3/8
Shipping Weight(lbs)*** 249
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
40
80
120
160
200
0.00
.025
.050
.075
.100
.125
0 150 300 450 600 750
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve(MaxRPM Non-Reinforced Wheel = 1833)
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 21 of 27
MARK: C-EXH-201
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
Air Flow
H O.D.
C
Discharge
GAir Flow
F
BB
A
(D x E)
Air Flow
Inlet
D
E
GEMINIInline Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan
wheel - Injection molded flame resistant fan housing
with round outlet duct - 22 ga. galvanized steel inlet box
- Permantly lubricated 2-speed motor with built-in
thermal overload protection and disconnect plug -
Isolation mounted motor, mounted to one piece
galvanized stamped steel integral motor mount/inlet -
Field wiring compartment with receptacle - Adjustable
prepunched mounting bracket - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GN-144 35.0 31.0 671 39
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .4
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
41 38 39 35 31 25 18 11 37 22 .3 .3
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDFAN SPEED CONTROLLER 5 AMP 240 VOLT100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A 12
B 4
C 15-5/8
D 14
E 3-3/8
F 12-3/4
G 8-3/8
H O.D. 5-15/16
Shipping Weight(lbs)*** 18
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
30
60
90
120
150
0.00
20.0
40.0
60.0
80.0
100
0 10.0 20.0 30.0 40.0 50.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 22 of 27
MARK: C-EXH-202
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
Air Flow
H O.D.
C
Discharge
GAir Flow
F
BB
A
(D x E)
Air Flow
Inlet
D
E
GEMINIInline Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan
wheel - Injection molded flame resistant fan housing
with round outlet duct - 22 ga. galvanized steel inlet box
- Permantly lubricated 2-speed motor with built-in
thermal overload protection and disconnect plug -
Isolation mounted motor, mounted to one piece
galvanized stamped steel integral motor mount/inlet -
Field wiring compartment with receptacle - Adjustable
prepunched mounting bracket - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GN-124 35.0 31.0 884 61
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .3
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
37 49 41 42 36 29 22 22 42 28 .9 .5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDFAN SPEED CONTROLLER 5 AMP 240 VOLT100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A 12
B 4
C 15-5/8
D 14
E 3-3/8
F 12-3/4
G 8-3/8
H O.D. 5-15/16
Shipping Weight(lbs)*** 16
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
50
100
150
200
250
0.00
20.0
40.0
60.0
80.0
100
0 10.0 20.0 30.0 40.0 50.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 23 of 27
MARK: C-EXH-203
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
Air Flow
H O.D.
C
Discharge
GAir Flow
F
BB
A
(D x E)
Air Flow
Inlet
D
E
GEMINIInline Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan
wheel - Injection molded flame resistant fan housing
with round outlet duct - 22 ga. galvanized steel inlet box
- Permantly lubricated 2-speed motor with built-in
thermal overload protection and disconnect plug -
Isolation mounted motor, mounted to one piece
galvanized stamped steel integral motor mount/inlet -
Field wiring compartment with receptacle - Adjustable
prepunched mounting bracket - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GN-124 35.0 31.0 884 61
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .3
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
37 49 41 42 36 29 22 22 42 28 .9 .5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDFAN SPEED CONTROLLER 5 AMP 240 VOLT100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A 12
B 4
C 15-5/8
D 14
E 3-3/8
F 12-3/4
G 8-3/8
H O.D. 5-15/16
Shipping Weight(lbs)*** 16
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
50
100
150
200
250
0.00
20.0
40.0
60.0
80.0
100
0 10.0 20.0 30.0 40.0 50.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 24 of 27
MARK: C-EXH-204
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
Air Flow
H O.D.
C
Discharge
GAir Flow
F
BB
A
(D x E)
Air Flow
Inlet
D
E
GEMINIInline Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan
wheel - Injection molded flame resistant fan housing
with round outlet duct - 22 ga. galvanized steel inlet box
- Permantly lubricated 2-speed motor with built-in
thermal overload protection and disconnect plug -
Isolation mounted motor, mounted to one piece
galvanized stamped steel integral motor mount/inlet -
Field wiring compartment with receptacle - Adjustable
prepunched mounting bracket - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GN-124 35.0 31.0 884 61
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .3
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
37 49 41 42 36 29 22 22 42 28 .9 .5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDFAN SPEED CONTROLLER 5 AMP 240 VOLT100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A 12
B 4
C 15-5/8
D 14
E 3-3/8
F 12-3/4
G 8-3/8
H O.D. 5-15/16
Shipping Weight(lbs)*** 16
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
50
100
150
200
250
0.00
20.0
40.0
60.0
80.0
100
0 10.0 20.0 30.0 40.0 50.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 25 of 27
MARK: C-EXH-205
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
Air Flow
H O.D.
C
Discharge
GAir Flow
F
BB
A
(D x E)
Air Flow
Inlet
D
E
GEMINIInline Fans100 Series
STANDARD CONSTRUCTION FEATURES:Forward curved injection molded polypropylene fan
wheel - Injection molded flame resistant fan housing
with round outlet duct - 22 ga. galvanized steel inlet box
- Permantly lubricated 2-speed motor with built-in
thermal overload protection and disconnect plug -
Isolation mounted motor, mounted to one piece
galvanized stamped steel integral motor mount/inlet -
Field wiring compartment with receptacle - Adjustable
prepunched mounting bracket - Shipped in ISTA
certified transit tested packaging.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
NominalRPM
InputWatts
1 GN-124 35.0 31.0 884 61
Performance
Altitude (ft): 0 Temperature (F): 70
Volts/Ph/Hz Nameplate Amps
220/1/60 .3
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones HVISones
37 49 41 42 36 29 22 22 42 28 .9 .5
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PRE-WIREDFAN SPEED CONTROLLER 5 AMP 240 VOLT100 SERIES DAMPERFAN & MOTOR-220V/50HZ
A 12
B 4
C 15-5/8
D 14
E 3-3/8
F 12-3/4
G 8-3/8
H O.D. 5-15/16
Shipping Weight(lbs)*** 16
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
***Includes fan, motor & accessories.
0
50
100
150
200
250
0.00
20.0
40.0
60.0
80.0
100
0 10.0 20.0 30.0 40.0 50.0
Flow (L/s)
SP
(P
a)
Inp
ut W
atts
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs Watts
Point of Operation
System CurvePage 26 of 27
MARK: C-EXH-206
PROJECT: UNVEREN PROJECT REVISED
DATE: 8/18/2008
T Sq.
B
G
AC
ACRU-BUpblast CentrifugalExhaust VentilatorRoof Mounted/Belt Drive
STANDARD CONSTRUCTION FEATURES:All aluminum housing - Backward inclined all aluminum wheel - Two
piece top cap with stainless steel quick release latches - One piece
bottom spinning - Welded curb cap corners - Birdscreen - Vibration
isolators - Lifting Lugs - Permanently lubricated ball bearing motors -
Static resistant belts - Adjustable pitch drives through 5 hp motor -
Corrosion resistant fasteners - Regreasable bearings in a cast iron pillow
block housing, rated at 200,000 hours average life - All fans factory
adjusted to specified fan RPM - Transit tested packaging. Standard
motors ship factory installed.
QtyCatalogNumber
Flow(L/s)
SP(Pa)
FanRPM
Power*(HP)
1 180R9B 2487 62.0 1421 1.75
Performance (*Bhp includes 7% drive loss)
Altitude (ft): 0 Temperature (F): 70
HP RPM Volts/Ph/Hz Enclosure Mounted
2 1425 220/1/50 ODP -SE Yes
Motor Information
1 2 3 4 5 6 7 8 LwA dBA Sones
80 86 91 86 77 74 70 65 87 75 24
Sound Data Inlet Sound Power by Octave Band
v5.6.4.10443
Accessories:STD DISCONNECT PREWIREDBD-24 DAMPERROOF CURB RCA 28-17.2H -LESS NLR W/TRAYALUMINUM BIRDSCREENSPARE BELT SET2 HP 220V/1PH/50HZ ODP CL F 50 DEG C 1425 RPM MTR
A 24-13/16
B 39-7/16
C 35-7/8
G 3
T Sq. 30
Roof Open. Sq.* 25-1/2
Shipping Weight(lbs)*** 189
NOTE: Accessories may affect dimensions shown.
Dimensions (inches)
* Roof opening size for curbs supplied by Cook only.***Includes fan, motor & accessories.
0
120
240
360
480
600
0.00
.400
.800
1.20
1.60
2.00
0 600 1200 1800 2400 3000
Flow (L/s)
SP
(P
a)
Po
we
r (HP
)
Fan Curve
Fan Curve Legend
L/s vs SP
L/s vs HP
Point of Operation
System CurvePage 27 of 27
3
Page 1 of 14
Page 1 of 14
4
Page 2 of 14
Page 2 of 14
5
Page 3 of 14
Page 3 of 14
7
Page 4 of 14
Page 4 of 14
8
Page 5 of 14
Page 5 of 14
9
Page 6 of 14
Page 6 of 14
10
Page 7 of 14
Page 7 of 14
12
Page 8 of 14
Page 8 of 14
15
Page 9 of 14
Page 9 of 14
17
Page 10 of 14
Page 10 of 14
19
Page 11 of 14
Page 11 of 14
21
Page 12 of 14
Page 12 of 14
25
Page 13 of 14
Page 13 of 14
29
Page 14 of 14
Page 14 of 14
47
Page 1 of 14
Page 1 of 14
48
Page 2 of 14
Page 2 of 14
49
Page 3 of 14
Page 3 of 14
50
Page 4 of 14
Page 4 of 14
51
Page 5 of 14
Page 5 of 14
52
Page 6 of 14
Page 6 of 14
53
Page 7 of 14
Page 7 of 14
54
Page 8 of 14
Page 8 of 14
55
Page 9 of 14
Page 9 of 14
91
Page 10 of 14
Page 10 of 14
92
Page 11 of 14
Page 11 of 14
93
Page 12 of 14
Page 12 of 14
94
Page 13 of 14
Page 13 of 14
95
Page 14 of 14
Page 14 of 14