SUITABLE SUBTRATES

Clean all substrates with a soft cloth and Pro-MATIC Anti Silicone degreaser

On old sanded paint work

OEM surfaces

Thermoplastic coatings—TPA

PR3250 Polyester Filler

Fiberglass

Plastic surfaces including PP and PE. Abrade with P240 - 320 abrasives before application

Clean and sanded steel panels

APPLICATION DATA

Mix 4:1 with PR6600 Activator

Pot Life: 55 - 70 minutes @ 23°c

21 - 23 sec Cup 4 / 23°c – DIN 53211

0 - 15% PR7100 2k Acrylic Thinner (Normal). 50% PR7100 2k Acrylic Thinner (Normal) if

applying to plastic substrates

PR4400 is a high solids primer filler with easy sanding properties. It has excellent filling and mechanical performance. Excellent adhesion to all plastic substrates including PP and PE without adhesion promoters. Fast drying times with the possibility of wet-on-wet application FULLY VOC COMPLIANT

Second Avenue, Chatham, Kent, ME4 5AU t: 01634 823900 f: 01634 823909

e: sales@capellasolutionsgroup.com www.capellasolutionsgroup.com

PR4400 4:1 HS PRIMER FILLER

AIR DRYING @ 23°c

Dust Free 5 minutes

Dry to Handle 40 minutes

In Depth 2 hours

BAKING @ panel temperature of 60 - 65°c

Flash Off Time 20 - 22°c 10 minutes

In Depth Drying 20 - 30 minutes

IR Drying

Short Wave 8 - 12 min

Lamp Distance < 70cm

SANDING

P400—P500 Flat bed sander

P600—P1000 Sanding by hand

ProMIX Eclipse 2K Acrylic or Eclipse Basecoat

PR4400 - 4:1 HS PRIMER FILLER COMPLIANT HVLP

1.5 – 1.8 mm 1.5 – 1.8 mm

3 - 4 bar 0.7 bar

2 coats = 100 - 120µm

Flash Point 27°C / 80°F

Specific Gravity 1.53 kg/lt

Solid Content 73% by weight (No thinner)

Theoretical Coverage 6 m2/lt at 120µm DFT

VOC (2004/42/EC) 2004/42/IIB(e)(840)530 The EU limit value for this product cate-gory in ready for use form is max 530g/l

PR4400 - 4:1 HS PRIMER FILLER

Second Avenue, Chatham, Kent, ME4 5AU t: 01634 823900 f: 01634 823909

e: sales@capellasolutionsgroup.com www.capellasolutionsgroup.com

DISCLAIMER OF LIABILITY

The information contained in this Technical Data Sheet is correct to the best of Alpha Coatings Limited trading as Capella Solutions Group’s (“Capella”) knowledge, however, you must satisfy yourselves that the Goods are suitable for your needs by way of your independent testing or other processes. Capella makes no warranty, representation, or guarantee regarding the information contained in the Technical Data Sheet or the suitability of its products and services for any particular purpose, nor does Capella assume liability arising out of the application or use of the Goods other than any liability which cannot be limited by law including but not limited to liability for:(a) death or personal injury caused by negligence;(b) fraud or fraudulent misrepresentation; and (c) breach of the terms implied by section 12 of the Sales of Goods Act 1979, in such circumstances Capella’s total liability shall not exceed the cost of the Goods. Capella’s total liability includes liability in contract, tort, negligence, breach of statutory duty, or otherwise. It is the Customer’s responsibility to ensure that the guidance on the Technical Data Sheet is followed.