PR No. 14-19782 SUPPLY, DELIVERY, INSTALLATION AND … · 2015-03-26 · IP Surveillance and Security Project Republic of the Philippines CAGAYAN DE ORO CITY WATER DISTRICT Corrales

IP Surveillance and Security Project

Republic of the Philippines CAGAYAN DE ORO CITY WATER DISTRICT

Corrales Avenue, Cagayan de Oro City

TECHNICAL SPECIFICATIONS

PR No. 14-19782 – SUPPLY, DELIVERY, INSTALLATION AND

CONFIGURATION OF 1 LOT CCTV: IP SURVEILLANCE AND

SECURITY PROJECT



A. Proposed IP Surveillance and Security Project Design and Scope of Works detail The project aims to improve the overall security and communication system of the

Cagayan de Oro City Water District by installing enterprise grade Surveillance

system and structured cabling. The implementation involves the design and

installation of a.) IP CCTV Camera that supports technology such as video

analytics, HDTV and H.264 Video compression and b.) recording/management

system using industrial grade storage device with built-in video analytics and video

management software to ensure real time viewing and recording of the CCTV

cameras.

The minimum requirements or specification for the Proposed IP Surveillance and Security Project are detailed in the following sub-sections. While it is mandatory for the supplier to meet these minimum requirements, if the design of a particular requirement would need a higher category of product, the supplier should provide as such. The supplier should however provide basis for arriving at the solution being proposed as part of his offer. The supplier should design the solution to provide scalability to Cagayan de Oro Water District (COWD). Basic Requirement: To have a solution for the surveillance and security using IP Surveillance Camera for Cagayan de Oro City Water District (Main Office at Corrales and Kauswagan Sub-Office). The overall Scope of Work (SoW) includes the following:

• To provide an IP Surveillance Camera and Security system. • To supply, deliver, install and configure the said IP camera equipment that

supports the direction of COWD for IP base Surveillance and Security, including structured cabling and network modules for the connectivity of the IP camera equipment to the network.

Note: The above scope of work is indicative and may not be exhaustive in any manner. The supplier shall be assumed to have accounted for best practices, all services and equipment necessary for the IP Surveillance and Security Project. B. Bill of Materials:

ITEM DESCRIPTION QTY UOM

1.0 OUTDOOR READY IP DOME CAMERA WITH INFRARED

37 UNITS

2.0 OUTDOOR READY IP DOME CAMERA WITH VIDEO ANALYTICS

8 SETS

3.0 OUTDOOR MOUNTING ACCESSORIES & KITS 17 UNIT

4.0 IP SURVEILLANCE RECORDING, VIEWING AND MANAGEMENT SYSTEM

1 UNIT

5.0 STRUCTURED CABLING (COPPER & FIBER) 1 LOT


C. SPECIFICATIONS

1. OUTDOOR READY IP DOME CAMERA WITH BUILT-IN INFRARED

HD 1080p outdoor dome camera

I. FEATURES: Outdoor IP dome camera with varifocal lens 1080p resolutions Fully configurable quad streaming Regions of interest and E-PTZ IR with at least 15 m (50 ft) viewing distance Vandal-resistant IP dome camera for outdoor HD surveillance. Varifocal 3 to 10 mm f1.3 lens; With smart dynamic noise reduction to reduce bandwidth and storage requirements by up to 50% H.264 quad-streaming; cloud services; motion/tamper/audio detection; Two-way audio and audio alarm Edge recording Cloud-based facilities Easy installation True day/night switching Access Security

Ingress protection: IP66

Impact protection: IK10

ONVIF conformance

II. CERTIFICATIONS AND APPROVALS

Standards IEC 62471 (IR version), EN 60950-1, UL 60950-1, UL 60950-22, CAN/CSA-C22.2 NO. 60950-1, CAN/CSA-C22.2 N0. 60950-22, EN 50130-4, EN 50130-5, FCC Part15 Subpart B, Class B, EMC directive 2004/108/EC, EN 55022/24 class B, VCCI J55022 V2 / V3, AS/NZS CISPR 22 (equal to CISPR 22), ICES-003 class B, EN 50121-4, EN 50132-5-2; IEC 62676-2-3

Product certifications CE, FCC, UL, cUL, C-tick, CB, VCCI

Ingress protection IP66

Impact protection IK10 Region Certification

Europe CE

USA UL

III. TECHNICAL SPECIFICATIONS

A. POWER

Input voltage +12 VDC or Power-over-Ethernet


Power consumption 6.0 W max. (IR version)

PoE IEEE 802.3af (802.3at Type 1) Power level: Class 1

B. Video

Sensor type 1/2.7-inch CMOS

Sensor pixels: 1920 x 1080

1080p Sensitivity (3200 K, reflectivity 89%, 30IRE, F1.3):

0.24 lx (color) 0.05 lx (mono) 0.0 lx (IR on)

Dynamic range: 76 dB

True Day/Night: Auto, Color, Monochrome

Shutter speed: Automatic Electronic Shutter (AES) Fixed (1/25 to 1/15000)

Video resolution: 1080p, 720p, 432p, 288p, 144p

Aspect ratio: 16:9

Video compression: H.264 MP (Main Profile); M-JPEG

Max. frame rate: 30 ips (M-JPEG frame rate can vary depending on system loading)

Video Settings: Video watermarking, Alarm mode stamping, Image mirror, Image flip, Contrast, Saturation, Brightness, White balance, Sharpness level, Contrast enhancement, Backlight Compensation, Privacy Mask, Motion detection, Tamper alarm

C. Night vision (IR)

Distance: 15 m (50 ft)

LED: 15 LED high efficiency array, 850 nm

D. Lens

Lens type: Varifocal 3 to 10 mm, DC Iris F1.3 - 360

Lens mount: Board mounted

Horizontal field of view:

36° - 117°

Vertical field of view: 20° - 61°

E. Connection

Analog video out (for installation only):

BNC connector (1 Vpp CVBS, NTSC)

Alarm input: Short or DC 5V activation


Relay out: Input rating Maximum 1 A 24 VAC/VDC

F. Audio

Audio input: Line in jack connector

Audio output: Line out jack connector

Audio communication: Two-way, full duplex

Audio compression: AAC, G.711, L16 (live and recording)

G. Local Storage

Internal RAM: 10 s pre-alarm recording

Memory card slot: Supports at least 64 GB.

Recording: Continuous recording, ring recording. alarm/events/schedule recording

H. Software Control

Unit configuration: Via web browser or PC surveillance software

I. Network

Protocols: IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS, SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, Digest Authentication.

Encryption: TLS 1.0, SSL, DES, 3DES, AES

Ethernet: 10/100 Base-T, auto-sensing, half/full duplex

Ethernet connector: RJ45

Connectivity: ONVIF Profile S, Auto-MDIX

G. Mechanical

3-axis adjustment (pan/tilt/ rotation):

350º / 130º / 350º

Dimensions: Diameter: 145 mm (5.72 in) Height: 118 mm (4.66 in)

Weight: 1050 g (2.32 lb) approx.

Color: RAL 9004, RAL 9010


H. Environmental

Operating temperature:

30 ºC to +50 ºC (-22 ºF to +122 ºF)

Storage temperature: -30 ºC to +70 ºC (-22 ºF to +158 ºF)

Humidity: 20% to 90% relative humidity (non condensing)

IV. WARRANTY

Warranty 3 years

2. OUTDOOR READY IP DOME CAMERA WITH VIDEO ANALYTICS

Camera provides clear images 24/7 – even at night or under low-light conditions.

I. FEATURES: Excellent low-light performance (0.017 lx in color) Aesthetic vandal-resistant enclosure, suitable for

indoor or outdoor applications with smart dynamic noise reduction to reduce bandwidth and

storage requirements by up to 50% Outstanding wide dynamic range (100 dB with smart auto exposure) Easy to install with auto zoom/focus SR lens, wizard

and pre-configured modes

II. CERTIFICATIONS AND APPROVALS

A. HD standards

Complies with the 296M-2001 Standard in: – Resolution: 1280x720 – Scan: Progressive – Color representation: complies with ITU-R BT.709 – Aspect ratio: 16:9 – Frame rate: 50 and 60 frames/s

B. Standards

Emission EN55022 Class B FCC Part 15, class B

Immunity EN50130-4 (PoE, +12 VDC, 24 VAC)* EN50121-4

Safety EN60950-1 UL60950-1 (2nd edition) CAN/CSA-C 22.2 No. 60950-1

Vibration Camera with lens as per IEC60068-2-6 (5 m/s2 , operational)

ONVIF conformance

EN 50132-5-2; IEC 62676-2-3

Region Certification

Europe CE


CE accessories

USA UL

FCC

III. TECHNICAL SPECIFICATIONS A. Power

Power Supply 24 VAC 50/60 Hz 12 VDC Power-over-Ethernet 48 VDC nominal

Current Consumption 500 mA | 600 mA IVA (12 VDC) 450 mA | 500 mA IVA (24 VAC) 150 mA | 175 mA IVA (PoE 48 VDC)

Power Consumption 6 W | 7.2 W IVA

PoE IEEE 802.3af (802.3at Type 1)

B. Sensor

Type 1/3-inch CMOS

Pixels 1312 x 1069 (1.4MP)

C. Video performance - Sensitivity

Mono 0.0057 lx (0.00057 fc)

Color 0.017 lx (0.0017 fc)

Lens 10 - 23 mm (F1.6)

• Color 0.03 lx (0.003 fc)

• Mono 0.01 lx (0.001 fc)

D. Video performance - Dynamic range

Dynamic range 84 dB WDR 100 dB WDR (with smart auto exposure)

E. Video streaming

Video compression H.264 (MP); M-JPEG

Streaming Multiple configurable streams in H.264 and MJPEG, configurable frame rate and bandwidth. Regions of Interest (ROI)

Overall IP Delay Min. 120 ms, Max. 240 ms

GOP structure IP, IBP, IBBP

Encoding interval 1 to 60 (50) ips

F. Resolutions (H x V)

720p HD 1280 x 720

1024p 5:4 (cropped) 1280 x 1024 (30p max., no video analytics)

Upright 9:16 (cropped)

400 x 720

D1 4:3 (cropped) 704 x 480

480p SD Encoding: 704 x 480; Displayed: 854 x 480


432p SD 768 x 432

288p SD 512 x 288

240p SD Encoding: 352 x 240; Displayed: 432 x 240

144p SD 256 x 144

G. Video functions

Day/Night Color, Mono, Auto

Adjustable picture settings

Contrast, Saturation, Brightness

White Balance 4 automatic modes, manual mode and measure

Shutter Automatic Electronic Shutter (AES) Fixed (1/60 [1/50] to 1/15000) selectable Default shutter

Backlight compensation

Off / On / Smart Auto Exposure (BLC)

Contrast enhancement

On/off

Noise reduction Smart dynamic noise reduction with separate temporal and spatial adjustments

Sharpness Sharpness enhancement level selectable

Privacy Masking Four independent areas, fully programmable

Video Motion Analysis

Motion and smart video analysis

Other functions Image mirror, Image flip, Pixel counter, Video watermarking, Display stamping, Scene modes

H. Audio streaming

Audio Streaming Full duplex / half duplex

Signal-to-noise ratio > 50 dB

Audio compression AAC-LC, G.711, L16 (live and recording)

I. Input/output

Analog Video out CVBS (PAL/NTSC), 1 Vpp, BNC, 75 Ohm

Analog Video out (service only)

CVBS (PAL/NTSC), 1 Vpp, 2.5 mm jack, 75 Ohm (no surge protection)

Audio 1 x mono line in, 1 x mono line out

• signal line in 12 kOhm typical, 1 Vrms max

• signal line out 1 Vrms at 1.5 kOhm typical,

Alarm 2 inputs

• activation voltage +5 VDC to +40 VDC (+3.3 VDC with DC-coupled 22 kOhm pull-up resistor)

Relay 1 output

• voltage 30 VAC or +40 VDC


Maximum 0.5 A continuous, 10VA

J. Local storage

Internal RAM 10 s pre-alarm recording

Memory card slot Supports at least 64 GB

Recording Continuous recording, ring recording. alarm/ events/schedule recording

K. Software

Unit Configuration Via web browser or Configuration Manager

Firmware update Remotely programmable

Software viewer Web browser, Video Client, or third party software

L. Network

Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, noip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication

Encryption TLS 1.0, SSL, DES, 3DES, AES

Ethernet 10/100 Base-T, auto-sensing, half/full duplex

Connectivity ONVIF Profile S , Auto-MDIX, GB/T 28181

M. Optical

Lens 3 to 9 mm Automatic Varifocal (AVF) SR lens (IR corrected) - or – 10 to 23 mm Automatic Varifocal (AVF) SR lens (IR corrected)

Lens mount Board mounted

Adjustment Motorized zoom/focus

Iris control Automatic iris control

Viewing angle (3 to 9 mm)

Wide: 96º x 52º (H x V) Tele: 32º x 18º (H x V )

Viewing angle (10 to 23 mm)

Wide: 28º x 15º (H x V) Tele: 12.4º x 6.9º (H x V )

N. Mechanical

Dimensions (D x H) 158 x 124 mm (6.22 x 4.89 in)

Weight (approx) 0.85 kg (1.87 lb) 1.28 kg (2.82 lb) with SMB

Mounting Flush mount or surface mount

Color White (RAL9010) trim ring with black inner liner


Adjustment range 360º pan, 90º tilt, ±90º twist

Dome bubble Polycarbonate, clear with UV blocking antiscratch coating

Trim ring Aluminum

O. Environmental

Operating temperature

-30 ºC to +50 ºC (-22 ºF to +122 ºF)

Cold start temperature

-20 ºC (-4 ºF)

Storage temperature -50 ºC to +70 ºC (-58 ºF to +158 ºF)

Operating humidity 5% to 93% relative humidity

Storage humidity Up to 98% relative humidity

Impact protection IK10

Water/dust protection IP 66 and NEMA Type 4X

Environmental Test Method

EN 50130-5:2011 Alarm systems Part 5 (Class IV Outdoor in general)

IV. Warranty

Warranty 3 years

3. OUTDOOR MOUNTING ACCESSORIES & KITS

Anti-rust treated Construction material shall be Aluminum alloy with white finish Weight (approx) : 0.69 kg (1.52 lb) Same brand with the Camera

4. SURVEILLANCE VIDEO RECORDING, VIEWING AND MANAGEMENT

SYSTEM

All-in-one recording, viewing and management solution for network surveillance systems of up to 128 channels, with 64 channels pre-licensed

I. FEATURES: RAID-5 protected, all-in-one, fully featured video management solution

for up to 128 channels Out-of-the-box IP video management solution with up to 24 TB

storage capacity Robust, secure operation - instant real time access to video Instant search capability Advanced user and alarm management

II. Functions

A. Instant real time access to video - Dynamic Transcoding technology ensures you can view your video immediately

B. Management - access to the management application via a customized GUI

C. Remote viewing - Video Client for viewing video D. IT Management - use one central tool for configuration and

operations management reduces installation and training requirements, and helps keep ongoing system management costs low


III. Certifications and approvals

Region Certification

Europe CE

USA UL

IV. TECHNICAL SPECIFICATIONS

A. Processor

Processor Intel Xeon Quad Core X3430 (2.4 GHz, 8 M Cache, 95 W)

Socket 1

Cache memory 1 x 8 MB Level 2 cache

Memory protection ECC unbuffered

Max front side bus 1333 MHz

B. Memory installed: 4 GB, DDR3-1333 ECC UNB (2 x 2 GB) C. Storage

Storage type 8 Trays: 3.5-inch SATA

Hard Drives installed 24 TB, (8X3TB SATA/300 7.200 RPM 3.5“)

Full system capacity (Internal+External)

120 TB

SAS RAID card 2108 based SAS/SATA RAID card – 8 internal ports/low profile-PCI-E

Graphics card At least 1 GB (PCI), low profile

Sound card Creative Sound Blaster PCI sound card

OS drive Intel SSD 320 OVR, 80 GB (MLC)

DVD writer Internal

D. Accessories: Keyboard, Mouse E. AC input rating: 100 to 240 V / 9 to 4 A / 50 to 60 Hz F. Electrical 240 VAC input

Actual output wattage from power supply

256.44 W

Efficiency of power supply 90%

Power consumption (w/o hard drives)

284.94 W

Total BTU/h 972.49

Power factor .92

System AC input VA requirement

309.71 VA

G. Mechanical

Form factor 2U rack mount

Power supply 740 W Platinum Level Redundant

USB ports 4 USB 2.0

Network Dual Intel 82574L Gigabit LAN


Dimensions (H x W x D) (approx)

89 x 437 x 648 mm (3.5 x 17.2 x 25.5 in)

Weight (approx) 23.6 kg (52 lb)

H. Environmental

Operating temperature +10 °C to +35 °C (+50 °F to +95 °F)

Non-operating temperature -40 °C to +70 °C (-40 °F to +158 °F)

Operating relative humidity 8 to 90% (non-condensing)

Non-operating relative humidity

5 to 95% (non-condensing)

I. WARRANTY

Warranty 3 years

5. STRUCTURED CABLING

All copper cables shall conform to ANSI/TIA/EIA-568-B Commercial Building Telecommunications Cabling Standard and ISO/IEC 11801 (International) Generic Cabling for Customer Premises standard.

The Cat5e cable shall be protected by means of PVC Pipe for indoor and IMC Pipes for outdoor/exposed applications.

OUTLETS

All category 5e information outlets designed for termination of 4-pair balanced twisted-pair category 5e copper cable must possess the following characteristics at the minimum:

Be available in black, white, red, gray, yellow, blue, green, orange, ivory, bright white, light ivory and alpine white

Meets all TIA/EIA-568-C.2 Category 5e and ISO 11801 2nd Edition Class D channel standard requirements at swept frequencies up to 100 MHz

Meets ANSI/TIA-968-A requirements; Meets IEC 60603-7

Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications

Support industry standards for T568A or T568B wiring options on each individual outlet

Allow installation from the front or rear of the faceplate, and allow for the jack to pass through the faceplate without re-termination

Confidence that each jack module delivers specified performance

Applications include: Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet)

155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM

Token Ring 4/16

Voice over internet protocol (VoIP)


UTP CABLE

All Category 5e cable shall conform to the following minimum performance standards:

Twisted-Pair Cabling

All qualified cables shall surpass the most severe category requirements provided in the Industry Standards by meeting or exceeding the performance listed below for all specified frequencies (except where noted):

Parameter UTP Cable Performance

100 MHz 160 MHz* 200 MHz* 250 MHz* 300 MHz*

Insertion Loss (dB) 19.3 25.1 28.1 31.4 34.5

NEXT Loss (dB) 49.3 46.2 44.8 43.3 42.1

PSNEXT Loss (dB) 42.3 39.2 37.8 36.3 35.1

ACR (dB) 30.0 21.1 16.7 11.9 7.6

PSACR (dB) 23.0 14.1 9.7 4.9 0.6

ACR-F (dB) 44.8 40.7 38.8 36.8 35.3

PS ACR-F (dB) 38.8 34.7 32.8 30.8 29.3

Return Loss (dB) 30.0 28.0 27.0 26.0 25.0

Propagation Delay (ns)

513.0 512.0 512.0 511.0 511.0

UTP PATCH CORDS All Category 5e modular equipment cords shall conform to the

following minimum performance standards:

Meets all TIA/EIA-568-C.2 Category 5e and ISO 11801 channel performance:v2nd Edition Class D channel requirements at swept frequencies up to 100 MHz

Meets ANSI/TIA-968-A;

Meets IEC 60603-7

Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications

RoHS Compliant

Be constructed of UTP 24 AWG stranded copper cable and a modular plug at each end.

Be 100% performance tested that each patch cord delivers specified performance.

Be compatible with both T568A and T568B wiring schemes.

Prevents snags and provides easy release

Provides identification of performance level, length, and quality control number for future traceability

Meets individual length and color-coding requirements

Be available in standard lengths of 3, 5, 7, 10, 15 and 20 ft. with custom lengths available upon request

Be certified by Underwriters Laboratories UL 1863 approved

Should be factory crimped


UTP Patch Panel

All Category 5e patch panel shall conform to the following minimum performance standards:

Exceed ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards

Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications

Each port is 100% tested to ensure NEXT and RL performance and is individually serialized to support traceability

Angled versions allow for higher density installations by easily routing the patch cords to each side of the panel eliminating the need for horizontal cable management

Terminate 4 pair, 22 - 26 AWG, 100 ohm, solid or stranded twisted pair cable

Mount to standard EIA 19" rack or 23" racks with optional extender bracket

FIBER OPTIC CABLE

The backbone for data shall be laser optimized 50/125m multi-mode fiber optic cables and shall meet and exceed the following specifications:

Shall comply to the following standards:

ANSI/TIA/EIA-568B.3

ISO/IEC 11801

Telcordia GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cables

Riser (OFNR) and plenum (OFNP) rated versions

Shall have the minimum key features and benefits:

Efficient packaging of higher fiber counts

Lightweight and easy to handle during installation

Cable design and flexible buffer tubes allow for quick breakout and ease of routing

High quality buffering offers ease of stripping while maintaining optical performance

Sheath markings provide positive identification and length verification; buffered fibers and subunits are in accordance with TIA standard for easy identification

Riser (OFNR) and plenum (OFNP) rated versions

Singlemode (OS1/OS2) and multimode (OM1, OM2, OM3 and OM4 laser optimized) fiber provide design flexibility and lower cost ownership

10 Gb/s laser optimized fiber available

Multimode/singlemode hybrid designs extend life cycle and reduce cost of ownership

Indoor/outdoor designs meet specific application requirements

Cable construction & specifications:


50/125m loose tube fiber construction

distribution cable is available in fiber counts from 6 to 144 fibers

Tight buffer design

Thermoplastic outer and inner (sub-unit) jackets

Aramid yarn strength members

Shall meet the Technical Information in Table below:

Performance Measure

Riser Plenum

Bend radius Dynamic: 20 x Cable O.D.

Static: 10 x Cable O.D.

Dynamic: 20 x Cable O.D.

Static: 10 x Cable O.D.

Tensile rating (<12 fibers)

Installation: 300 lb. (1335 N)

Long Term: 100 lb. (440 N)



Tensile rating (>12 fibers)





Storage temperature -40°F to 158°F (-40°C to 70°C)

-40°F to 158°F (-40°C to 70°C)

Installation temperature

-4°F to 158°F (-20°C to 70°C) 32°F to 140°F (0°C to 60°C)

Operation temperature

-4°F to 158°F (-20°C to 70°C) -4°F to 158°F (-20°C to 70°C)

Attenuation Singlemode: 0.7dB/km @ 1310 & 1550nm

Multimode: 3.5dB/km @ 850nm; 1.5dB/km @ 1300nm

FIBER OPTIC INTERCONNECT PANEL (FOR DATA) All fiber optic panels shall provide inter-connect capabilities to

network switches and contain cable management for supporting and routing the fiber cables/jumpers. The fiber optic interconnect panel shall be rack mountable and shall:

Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers

Accept modules for fiber optic, UTP, and audio/video, which

snap in and out for easy moves, adds and changes.

Label versions available for easy port identification

Mount to standard EIA 19" racks or 23" racks with optional extender brackets

FIBER PATCH CORD

Fiber patch cords shall be used to interconnect the backbone fiber terminated into the fiber interconnect panel to the network devices. Fiber equipment cords shall:

Be available in standard lengths of 1, 3, and 5 meters, custom lengths shall also be available, and shall meet or


exceed standards as defined in TIA/EIA-568-C.3 and ISO/IEC 11801.

Utilize duplex fiber cable that is laser optimized 50/125m multimode and OFNR riser grade

Fiber patch cords shall be factory-made with duplex SC fiber optic connectors on both ends

Have a minimum return loss of 26dB min. (OM3 and OM4)

and insertion loss of 0.25dB max. (OM1, OM2, standard

OM3, OM4)

Shall have cable jacket rating of Low Smoke Zero Halogen

(LSZH) per: IEC 60332-1-2, IEC 60332-3-24, IEC 60754-1,

IEC 60754-2, IEC 61034-2

Shall have connector cable retention of Connector cable

retention: 50N @ 0°C, 19.4N @ 90°C

Shall have 500 cycles connector durability

Shall have storage temperature of -40°C to 70°C

All patch cord components meet the requirements of Directive 2002/95/EC.

BILL OF QUANTITIES

ITEM DESCRIPTION QTY UOM

1 Category 5e 4-pair UTP Cable, Gray Jacket 45 Nodes

2 Category 5e Modules for outlets, Camera end 45 Units

2 Category 5e Modules for Patch Panel 45 Units

3 Patch Panel, 1U 6 Units

4 Horizontal Cable Manager, 1U 2 Units

5 Category 5e Patch Cords, 4-pair, Camera end 45 Units

5 Category 5e Patch Cords, 4-pair, 1M, Patch Panel end

45 Units

7 8-Core Multimode, 50/125µm Fiber Optic Cable 50 Mtrs

8 Fiber Patch Panel 2 Units

9 Fiber Adapter Plate, 8-Fiber 2 Units

10 Blank Adapter Plates As

needed Units

11 Local Materials 1 Lot

12 Delivery, and Installation 1 Lot


ANNEX 1

CONTRACTOR QUALIFICATIONS, TRAINING AND WARRANTY SUPPORT

1) The Contractor shall be fully conversant and capable in the implementation of IP Surveillance and Security Systems and Cabling System. The Contractor shall at a minimum possess the following qualifications:

IP SURVEILLANCE & SECURITY SYSTEM, VIDEO RECORDING AND MANAGEMENT SYSTEM :

Contractor shall submit Letter of Authorization and/or Certificate of Approval from the Surveillance System Manufacturer stating that the Contractor is an authorized business partner and certified installer of the Surveillance System.

Contactor must have at least two (2) Certified Professionals of the brand they offer to ensure that the solution provided and the system to be implemented is based to standards.

The contractor should provide one (1) Project Manager, (1) Field Project Coordinator during the project implementation period.

The contractor must have at least two (2) competent, trained and experienced On-call engineers during the service warranty period

CABLING SYSTEM:

Contractor shall submit Letter of Authorization and/or Certificate of Approval from the Cabling System Manufacturer stating that the Contractor is an authorized business partner and certified installer of the Cabling System Manufacturer.

Contractor shall submit Letter of Warranty Support from the Cabling System Manufacturer stating that the Cabling Installation of the Contractor shall be supported by 20 years System Warranty to be issued by the Cabling System Manufacturer (not by the Contractor) which would cover products, cables, labor and application guarantee for 20 years. The Letter shall mention that the Contractor’s Cabling

installation shall be inspected by in-country Technical Manager from the Cabling System Manufacturer to ensure standards compliance of the cabling installation.

Contractor shall submit copy of ISO 9001 and ISO 14001 Certification of Cabling System Manufacturer.

ANNEX 2

WARRANTY

The contractor shall submit a warranty certificate after the implementation for the following: 1) IP SURVEILLANCE & SECURITY SYSTEM – 3 Years 2) SURVEILLANCE VIDEO RECORDING, VIEWING AND MANAGEMENT

SYSTEM – 3 Years 3) Network Cabling – at least 20 years


The contractor must have at least 1 unit standby camera equipment (OFFSITE) in case of failure and trouble during the warranty period

If the specified hardware specification are no longer available given that existing models are phased out, and new models are released, the contractor will deliver the latest equipment of equal or better specifications to those prescribed by the COWD at no additional cost

ANNEX 3

IMPLEMENTATION, DESIGN & LAYOUT

The contractor shall submit design and layout.

The contractor must submit weekly progress report during the implementation run

The Contractor shall attend to issues and other technical problems relating to Video Surveillance and LAN which may arise during the implementation run

ANNEX 4

TRAINING

The contractor shall provide an In-house System Administrator’s Training upon implementation of the system and turn-over.

Other Requirement:

Delivery : 90 calendar days upon receipt of Notice to Proceed

Freight : FOB COWD Warehouse, Kauswagan, CDOC

Payment : 15 calendar days after completion and final acceptance

NOTE: Please provide your specifications on a separate page using your own

letterhead.

Documents

PR No. 14-19782 SUPPLY, DELIVERY, INSTALLATION AND … · 2015-03-26 · IP Surveillance and Security Project Republic of the Philippines CAGAYAN DE ORO CITY WATER DISTRICT Corrales