Upload
abhijeet-sinha
View
228
Download
0
Embed Size (px)
Citation preview
7/28/2019 PPT on FPS
1/30
SUMMER TRAINING TATA MOTORS
Jamshedpur
PRESENTED BY :
NEHA KUMARI SINGH
ABHIJEET SINHA
DHEERAJ KUMAR
7/28/2019 PPT on FPS
2/30
In Guidance of:
Mr. Sujit Kumar Singh
ON
Implementation of
Fixed position stopIn praja conveyor
7/28/2019 PPT on FPS
3/30
WORLD TRUCK
7/28/2019 PPT on FPS
4/30
WORLD TRUCK
7/28/2019 PPT on FPS
5/30
About TATA MOTORS
Tata Motors Limited (formerly TELCO) is an
Indian multinationalautomotive manufacturing company headquarteredin Mumbai, Maharashtra, India and a subsidiary of the Tata Group. Its
products include passenger cars, trucks, vans, coaches, buses and military
vehicles. It is the world's eighteenth-largest motor vehicle manufacturing
company, fourth-largest truck manufacturer and second-largest bus
manufacturer by volume.
Tata Motors has auto manufacturing and assembly plants
in Jamshedpur, Pantnagar, Lucknow, Sanand, Dharwad and Pune in India,
as well as in Argentina, South Africa, Thailand and the United Kingdom. It
has research and development centres in Pune, Jamshedpur, Lucknow andDharwad, India, and in South Korea, Spain, and the United Kingdom. It has
a bus
http://en.wikipedia.org/wiki/Multinational_corporationhttp://en.wikipedia.org/wiki/Automotive_industryhttp://en.wikipedia.org/wiki/Mumbai,_Maharashtrahttp://en.wikipedia.org/wiki/Tata_Grouphttp://en.wikipedia.org/wiki/Automotive_industryhttp://en.wikipedia.org/wiki/Jamshedpurhttp://en.wikipedia.org/wiki/Pantnagarhttp://en.wikipedia.org/wiki/Lucknowhttp://en.wikipedia.org/wiki/Sanandhttp://en.wikipedia.org/wiki/Dharwadhttp://en.wikipedia.org/wiki/Punehttp://en.wikipedia.org/wiki/Punehttp://en.wikipedia.org/wiki/Dharwadhttp://en.wikipedia.org/wiki/Sanandhttp://en.wikipedia.org/wiki/Lucknowhttp://en.wikipedia.org/wiki/Pantnagarhttp://en.wikipedia.org/wiki/Jamshedpurhttp://en.wikipedia.org/wiki/Automotive_industryhttp://en.wikipedia.org/wiki/Automotive_industryhttp://en.wikipedia.org/wiki/Automotive_industryhttp://en.wikipedia.org/wiki/Tata_Grouphttp://en.wikipedia.org/wiki/Mumbai,_Maharashtrahttp://en.wikipedia.org/wiki/Automotive_industryhttp://en.wikipedia.org/wiki/Multinational_corporation7/28/2019 PPT on FPS
6/30
manufacturing joint venture with Marcopolo S.A., Tata Marcopolo, and aconstruction equipment manufacturing joint venture with Hitachi, TelconConstruction Solutions.
Founded in 1945 as a manufacturer oflocomotives, the companymanufactured its first commercial vehicle in 1954 in a collaborationwith Daimler-Benz AG, which ended in 1969.[4] Tata Motors entered thepassenger vehicle market in 1991 with the launch of the Tata Sierra and in1998 launched the first fully indigenous Indian passenger car, the Indica.Tata Motors acquired the South Korean truck manufacturer Daewoo
Commercial Vehicles Company in 2004 and the British premium carmakerJaguar Land Roverin 2008.
Tata Motors is listed on the Bombay Stock Exchange, where it is aconstituent of the BSE SENSEX index, the National Stock Exchange ofIndia and the New York Stock Exchange. Tata Motors is ranked 314th in the
2012 Fortune Global 500 ranking of the world's biggest corporations.
http://en.wikipedia.org/wiki/Marcopolo_S.A.http://en.wikipedia.org/wiki/Marcopolo_S.A.http://en.wikipedia.org/wiki/Tata_Marcopolohttp://en.wikipedia.org/wiki/Hitachihttp://en.wikipedia.org/wiki/Telcon_Construction_Solutionshttp://en.wikipedia.org/wiki/Telcon_Construction_Solutionshttp://en.wikipedia.org/wiki/Locomotiveshttp://en.wikipedia.org/wiki/Daimler-Benzhttp://en.wikipedia.org/wiki/Jaguar_Land_Roverhttp://en.wikipedia.org/wiki/Bombay_Stock_Exchangehttp://en.wikipedia.org/wiki/BSE_SENSEXhttp://en.wikipedia.org/wiki/National_Stock_Exchange_of_Indiahttp://en.wikipedia.org/wiki/National_Stock_Exchange_of_Indiahttp://en.wikipedia.org/wiki/New_York_Stock_Exchangehttp://en.wikipedia.org/wiki/Fortune_Global_500http://en.wikipedia.org/wiki/Fortune_Global_500http://en.wikipedia.org/wiki/New_York_Stock_Exchangehttp://en.wikipedia.org/wiki/National_Stock_Exchange_of_Indiahttp://en.wikipedia.org/wiki/National_Stock_Exchange_of_Indiahttp://en.wikipedia.org/wiki/BSE_SENSEXhttp://en.wikipedia.org/wiki/Bombay_Stock_Exchangehttp://en.wikipedia.org/wiki/Jaguar_Land_Roverhttp://en.wikipedia.org/wiki/Daimler-Benzhttp://en.wikipedia.org/wiki/Daimler-Benzhttp://en.wikipedia.org/wiki/Daimler-Benzhttp://en.wikipedia.org/wiki/Locomotiveshttp://en.wikipedia.org/wiki/Telcon_Construction_Solutionshttp://en.wikipedia.org/wiki/Telcon_Construction_Solutionshttp://en.wikipedia.org/wiki/Hitachihttp://en.wikipedia.org/wiki/Tata_Marcopolohttp://en.wikipedia.org/wiki/Marcopolo_S.A.7/28/2019 PPT on FPS
7/30
Welcom e to TATA MOTORS LTD.(JAMSHEDPUR)
Tata Motors is Known as one of the best Automobile Company
in India. In Jamshedpur plant TATA MOTORS produces trucks andheavy vehicles.
There are several Dept. and different materials undergodifferent processes at the different depts.
We have visited different Departments during induction traininginside TATA Motors are. CTR
ENGINE FACTORY
CAB & COWL FACTORY
FOUNDARY DIVISION
VEHICLE FACTORY I & II
VEHICLE FACTORY III
And finally done the project in VEHICLE FACTORY III inguidance of Mr. Sujit kumar Singh.
7/28/2019 PPT on FPS
8/30
VEHICLE FACTORY III also known as PRIMA FACTORY andWORLD TRUCK.
This Factory mainly consists of three lines Frame Line
Assembly Line
Trim Line
In Frame Line generally the assembly of long member andcross member is done then screws and nuts are tightened thenfinally goes for painting and finishing.
Our project is to design and install FPS system stands for FixedPosition Stop.
Pitch set as 150.
7/28/2019 PPT on FPS
9/30
Hardware Needs-FPS Pull Cord Required for different Stations
Emergency Stop Push Button Required
Inductive Proximity Sensor
VFD (Variable Frequency Drive)PLC (Siemens)
DI/DO
Power Supply
3 Induction Motor
Software Needs-
Simatic Manager
Contents for Fixed Pos it ion Stop (FPS System )
For Praja Lin e
7/28/2019 PPT on FPS
10/30
General View Of The Pro ject
Distance between two FPS point is kept fixed for the proper
operation of the system
7/28/2019 PPT on FPS
11/30
Distance
between
two FPS
point asdefined by
the pitch of
the motor.
7/28/2019 PPT on FPS
12/30
Selector Switch Installed for the FPS system
operation
7/28/2019 PPT on FPS
13/30
A Proximity Sensor is connected below the
chain of the conveyor to count the number of
teeth's to move from one FPS point to other
FPS point.
Teethcounting
sensor in
the
conveyor
PIT
7/28/2019 PPT on FPS
14/30
What is the use of FPS Sys tem?
In FPS system the main function is related with theoperation of pull cords.
Different FPS position should be marked at same
preferred distances.
There are several conditions which are to be satisfied.
The main importance of FPS is that line will stop only
at the specified place when the stop pull cord is
activated.
7/28/2019 PPT on FPS
15/30
Working of FPS
Normally when the start pull cord is activated the operation ofthe line should be normal and a proximity or counting sensor
has to count the no. of teeth's passed.
After a certain fixed no. of count as per the count given thesensor count should be reset.
The line should work normally up to when the stop pull cord is
pressed.
When the stop pull cord is activated the line should not stop
immediately the line should continue to move until the current
position reached to the next FPS point .
7/28/2019 PPT on FPS
16/30
Working of FPS
An Emergency switch should be always used for
safety purpose.
If the emergency switch is pressed the line should
stop immediately at the current position.
And when the emergency switch is released the lineshould start from the same position where it was
stopped.
7/28/2019 PPT on FPS
17/30
Algo r i thm For PLC Program
Different input and output bits are to be selected.
Counter will be used for counting the pitch of the motor fixed as150.
For checking the completion of counter value a comparator willbe used.
The input number given to the counting sensor is i0.0.
There will be interlocking provided for selector switch. i0.4 for start operation and i0.6 for stop operation as an input.
The counter should count upto pitch 150 and then check for thestop pull cord if the count is 150 and stop pull cord is activethen line should stop.
If the count is not 150 and stop pull cord is activated then also itshould count upto 150 and then it will stop the line.
The comparator compares and produces output and checkswhether the count has reached upto the pitch value 150.
7/28/2019 PPT on FPS
18/30
What is PLC?
PLC stands forProgrammable Logic Controller.
As the name suggests It is
* A digitally operating electronics apparatus
* It uses an memory for internal storage ofinstructions.
* It implements specific functions such as logic
sequencing, timing, counting & arithmetic to control
various types of machines or processes.
7/28/2019 PPT on FPS
19/30
7/28/2019 PPT on FPS
20/30
Why PLC?
In earlier time all logicsequencing for various machines
& process lines was controlled
by Relay Logic Controller (RLC).
Huge wiring, relays & many h/w
were required to implement asimple logic.
Troubleshooting & debugging
was very tough consequently
more B/D.
Response time was very slow.
For some modification in logic
entire wiring or H/W had to be
changed.
PLC based system eliminates
need of all complicated wiring for
logic sequencing.
Because of its modular design &
soft architecture troubleshooting& debugging is extremely easier
compared to RLC.
Its response time is extremely
fast thus many real time systems
can be controlled by PLC. Modification in logic level is very
easier as no need to change in
any H/W.
7/28/2019 PPT on FPS
21/30
Ladder logic program
7/28/2019 PPT on FPS
22/30
continuation
7/28/2019 PPT on FPS
23/30
continuation
7/28/2019 PPT on FPS
24/30
SIMULATION
7/28/2019 PPT on FPS
25/30
7/28/2019 PPT on FPS
26/30
Simulation
7/28/2019 PPT on FPS
27/30
Simulation
7/28/2019 PPT on FPS
28/30
BENEFITS of FPS Sys tem
The FPS system helps to perform the whole line
operation faster. If the worker activates the pull cord when he does not
finishes his work at that time the line will not stop and
only stop when the next FPS is reached.
If any accident occurs at the line or at any station
anybody can push the emergency switch and line will
be stopped automatically.
The FPS system helps to know the fixed position ofthe frame and the worker finishes his work before the
FPS position is reached.
7/28/2019 PPT on FPS
29/30
CONCLUSION
Hence, Successfully completed the summer training and projectwork in TATA MOTORS LTD. Jamshedpur and undergo
Induction Training for ONE MONTH.
Completed the project work on FPS system required for the
Praja line in FRAME SHOP.Designed the PLC program as per the requirement in software
Simatic Manager.
Learned many things inside the plant such as Team Work,
Quality and Punctuality.And this experience will surely help us in future a lot.
7/28/2019 PPT on FPS
30/30