Upload
jasondai
View
270
Download
4
Tags:
Embed Size (px)
Citation preview
LOGO
EDIXEON Introduction
EDIXEON Company Profile1
EDIXEON -PGS2
4
Company Introduction
Established in 2006
More than 120 on-line worker
8 experienced engineering team:
Monthly production capacity: 100,000 units
Setup: LED Lighting division; Intelligent electronics division a final product working shop (Xinjin Cheng Electronics Co.,ltd)
A Long Term OEM Partner (electronics factory)
ISO 9001 Certified Enterprise
CE and RoHS approved
Turnover in 2009: USD 2.7 million
Expected turnover this year : USD 5 million, while hopefully reaching USD5.5 million
Company policy: Be a Win-win business partner and help the client grow up together
Our aims: Strive to be an energy-saving pioneer.
Company Structure
Board of Director
General Manager
Administration Centre
Executive Dept
Financial Dept
Human Resource
Purchase Dept
Warehouse
R&D Centre
Product Technology Dept
Testing Dept
Marketing Dept
Lighting Dept
Intelligent Electronics Dept
Foreign Sales
Local Sales
Technical Support
Foreign Sales
Local Sales
Technical Support
Production Centre
Quality Control Dept
Production Dept 1
Production Dept 2
CE Certificate
Working Principle and Component
PGS Primary FunctionsFunction Highlights
Parking Lot Availability Accounting
Smart Guidance System
Graphical Management to the Parking Lot
Statistical Management to the Parking Lot
Statistics Report
Self-Diagnose Function
Return of Investment (ROI)
Mitigate congestion inside and outside the Parking Lot.
Increase the desirability of the Parking Lot.
Improve the image of the Parking Lot.
Features of Sensor
Featuresa) Detects the bay 2 times every second
b) False detecting-proofed function--avoiding false detection to adjacent spaces
c) Sensor and indicating light integration design
d) Low working voltage(24V)
e) Two detecting methods--detecting car or detecting ground
d) Power input protection
e) High safety
Ultrasonic Sensor(US02)
EDIXEON-PGS- Parking Lot Indicating Light
Technical Data
Introductiona) Indicating Light is controlled by the ultrasonic sensors and displays
synchronous status with the ultrasonic sensor
b) Large-size design; large emitting angle with visable distance of 150m.
c) High brightness built-in LED lamp beads (¢5), 5 green and 5 red.
Parking Lot Indicating Light
Voltage DC5V Current Peak Current 450mA
LED quantity 5R 5G Size 13cm(D)×6cm(H)
Contents
System Structure
EDIXEON-PGS is made up of ultrasonic sensor, bay indicator, data collector, centre processor, LED display, management software, cables and switches.
Installation Guideline
The installation procedure is as followed:
Pre-installation Stage
A. According to Parking Lot structure to design wiring layouts;B. According to the wiring layout design to calculate the cable load. And then
define the cable types and quantity.
Installation Stage
A. According to the Wiring Layout Design to do wiring. Then install PGS component according to System Diagram.
B. PGS component installation (pls refer to Installation Guidance)C. After component installation, cable checking, power testing, commissioning is
required. Technician will also need to check all the components via software.
Post-installation StageA. A component number table and a wiring layout shall be keep into file in case of
future maintenance.
Installation Guideline
Sensor Installation Guidance
Installation Site Function Image
Right above the bay Monitor bay occupancy
Step 4
Step 1Step 2
Step 3
Installation Procedure
Installation Guideline
Status Light
detector
Wiring Interface
DIP Switch
Status LightRed Light: Red light indicates the working status of the power.Yellow Light:Yellow light will be on when the ground is not even
enough for the ultrasonic to detect. In this circumstance, thedetecting mode shall be switched to un-even mode . (Plsrefer to DIP switch manual);
Green Light: When an object is detected at a distance beyond 4 meters,Green light will be on. It’s used to test the detecting ability
of the ultrasonic sensor.Blue Light: Blue light indicates communication status. Every time when
the ultrasonic receive a command, the blue light blinks
Interface Terminal+: DC24V power input;GND:Power ground cable interface terminal;A:Connects to Data collector’s RS485 Can bus AB:Connects to Data collector’s RS485 Can bus B;GND:RS485 Can bus ground cable interface terminal;R: Red Light Power Outlet (5V Output);G: Green Light Power Outlet (5V Output);GND:Signal Light ground cable interface terminal;
Wiring and Status Light
Installation GuidelineSensor Configuration
DIP Switch DIP Address Switch and Detecting range Switch
Address SwitchAddress Switch(543210):It’s used to configure address of ultrasonic sensor
SW SwitchMode Switch(SW): It’s used to configured the status light
“2” SwitchMode Switch(SW):It’s used to configure detecting mode of the ultrasonic sensor.
6 7 1 0 Switch Configuration Detecting Distance (meter) Actual Installing Height (meter)
□□□□(0) 1(Reserved) 1.5~2
□□□■(1) 1.5 2~2.5
□□■□(2) 2 2.5~3
□□■■(3) 2.5 3~3.5
■■□□(4) 2.5 3~3.5
■■□■(5) 3 3.5~4
■■■□(6) 3.5 4~4.5
■■■■(7) 4(Reserved) 4.5~5
“6 7 1 0”Switch Configuration
Installation Guideline
Bay Indicator Installation Guidance
Installation Site Function Image
At the forefront of the bay Indicate space availability
Step 4
Installation Procudure
Step 1
Step 3
Step 2
Installation Guideline
Data Collector Installation Guidance
Installation Site Function Image
Nearby its correlated ultrasonic sensor (depend on actual circumstance)
Collects ultrasonic sensor signal and forward it to
centre processor
Wiring Procedure
Power Input Interface
RS485-(1)Interface
Indicating Light
RS485-(2)Interface
DIP Switch
Wiring Interface:Power Input Interface:DC Power input . Please make sure the polarity is not reversed.RS485-(2) Interface: This interface is connected to centre processor’s RS485-(1) interfaceRS485-(1) Interface: This interface is connected toRS485 Can bus.
Status Light:Red Light: It indicates the working status of power. Green Light: It indicates the communication status of RS485-(1).
Installation Guideline
Centre Processor Installation Guidance
Installation Site Function Image
Management Centre (control room) Act as the processing centre
of the whole system
Wiring Procedure
Power Input Interface
RS485-(1)Interface
Status Light
RS485-(2)Interface
Infrastructure
DIP Address
Power Input:DC Power. Make sure the polarity is not reversed. RS485-(2) Interface: This interface connects to the RS232-485 converter in the PC.RS485-(1) Interface: This interface connects to the RS485-(2) Can bus.
Status Light:Red Light: Red light is the Power Light that indicates the status of power. Green Light: Green light is the light that indicatesthe communication status of RS485-(1).
Serial Port Line
Installation Guideline
Internal LED Display
Installation Site Function Image
Shall be installed at the crossing or driveway of the
Parking Lot.
Display availability information and guide
drivers to available bays.
Installation Procedure
Installation Guideline
LED Display Wiring Guidance
Power Input Interface
RS485-(1)
Status Light
MHNS
Power Input Interface:DC5V input, please make sure the polarity is not reversed.RS485-(2) interface:SuspendedRS485-(1) Interface: Connect to data collector’s RS485 –(1) Can bus. MH:Connect to external LED displaysNS:Connect to internal LED displays
Status Light:Red Light: Red light is the Power Light that indicates the status of power. Green Light: Green light is the light that indicates.the communication status of RS485-(1).
Installation Guideline
Management Software Installation Requirement
Installation Enviroment Function Image
Software Enviroment:•CPU:Intel P above 1.8G•RAM:more than 1G(necessary)•hardware:more than 80G(recommended)• screen:17 inch LCD(necessary)•CD ROM(necessary)•USB connection(recommended)
•Operating system:Windows XP(necessary),•Connector:one piece of PCI bus cable RS232 COM (male)•surveillance software: Microsoft Office Access2003、Excel2003(necessary)
Timely display of parking status
Statistic FunctionPermissionRemotely monitor
and control the working status of each part of PGS
Repeatedly Development
For software installation, pls refer to software installation guidance.
Installation Guideline
Configuration Software
Installation Enviroment Function Image
•CPU:Intel P above 1.8G•RAM:more than 1G(necessary)•hardware:more than 80G(recommended)• screen:17 inch LCD(necessary)•CD ROM(necessary)•USB connection(recommended)
•Operating system:Windows XP(necessary),•Connector:one piece of PCI bus cable RS232 COM (male)•surveillance software: Microsoft Office Access2003、Excel2003(necessary)
This software is used to configure the LED message and data collector quantity. It can also be used to observe the system data, and to test system hardware (sensor, data collector, and LED display)
For software installation, pls refer to software installation guidance
Routine Maintenance
To make sure a health system, routine inspection is required.
1. Quarterly inspection--dust cleaning. Such maintenance can prevent the component frombeing damaged by static.
2. Monthly inspection—component inspection. a) According to the component manual, user shall inspect component parameter, cable condition (voltage, cable
temperature and aging state), power supply. b) Use management software to check the working status of the component. If any abnormal is found, pls send
the component back to us for further inspection. Our engineer will then provide a solution in case other component meets similar problems.
3. Monthly inspection to the PC is required to make sure a healthy enviroment for the management software --PC antivirus, PC system cleaning. Meanwhile, monthly data backup is also required.
Matters that need attentionExtra protections are also required, such as protection against moisture, corrosion, dust, interference and lightning.
Trouble Shooting
Quick solution for the sales agent and engineering company:
Check up the faulty component
Use the management software to check up the site of the faulty component.
Solutions
1. Edixeon engineer diagnose the problem via internet.
2. Replace the faulty component directly.
3. If problem can’t be solved by above measures, on-site assitance will be provided.
Execution Materials
Trunk Line Materials
Cable Tray 50mm*100mm KBG ¢25mm
Power cable and Data cable
RVVP 2*0.75mm RVV 2*1.0mmRVV 3*0.5mm RV 3*2.5mm
Execution Materials
Spare Parts
Watertight Cabinet 30cm*50cm Anti-creeping Switch 220V 10-40A
24V 20A and 24V 1A Power
Warranty and Service
“Strive to meet customer’s requirement; Answer prompt, Act prompt” Under the guidance of such service concept, we divide our service into three phases ----Pre-sale, in-sale and after-sale.
1.Pre-sale Service
Service Content --System Introduction and pre-installation technical guidance.
Service Mode --You can propose any questions to our customer service department, If necessary, on-site guidance would also be provided. (Any charges incurred shall be paid by customer)
2. Sales service
Service Content --Free on-line technical guidance for any on-going project. If needed, on-site assistance is available. (Any charges incurred shall be paid by customer)
Service Mode --Free training for products’ installation, setting-up, system operating will be provided. If you meet any technical problem in the construction, we can by email, telephone etc to provide guidance; if necessary, our engineer will be assigned to go to your place at very early time to offer our guidance.
Warranty and Service
3. After-sale ServiceService Content --Free on-line technical guidance for any products within or beyond warranty period. If
necessary, on-site guidance will also be provided (charges incurred shall be paid by customer).
Service Mode –
Technical Guidance
Free technical guidance for any products (within or beyond warranty) will be provided by means of email, telephone etc. If necessary, on-site guidance will be also provided.
Product Maintenance
Warranty period—Warranty period starts since the delivery date. Service within Warranty Period—If any component runs into faulty within warranty period, replacement of the component will be free.
Beyond warranty period—For component running into faulty beyond warranty period (or caused by incorrect installation within warranty period), we will charge the fee of the component replacement and labor cost.