Rev
. 0.0
LAUMAS Elettronica srl • Phone: (+39) 0521 683124 • Fax (+39)
0521 681091UFFICIO VENDITE ITALIA: [email protected] • EXPORT
SALES DEPARTMENT: [email protected]
ISO 9001
ISO 14001 www.laumas.com
PSCLSPSCLS
CLS
kg
2000 CLS 1000-2000 kg 3.6 PSCLS2000
5000 CLS 5000 kg 3.6 PSCLS
DESCRIPTIONDESCRIPTION
MOUNTING KIT for COMPRESSION-LOW PROFILE load cellsMOUNTING KIT
for COMPRESSION-LOW PROFILE load cells
FOR LOAD CELLS
Load cell not included.
AISI 304 stainless steel or hot worked galvanized upper plate.
AISI 304 stainless steel lower plate. Constraint against lateral
forces and anti-tilt by ball-and-socket
joint
Misalignment compensation of the support plates structure.
Adjustable height.
Series laod cells:
CODENET WEIGHT OF
MOUNTING KIT (kg)
Application range from 1000 to 5000 kg
danieSchreibmaschinentextEinbaumodul für Drucklastwägezelle
CLS
danieSchreibmaschinentextNennlastbereich 1000 - 5000kg
danieTextfeldfeuerverzinkter Montagesatz für Silos,
Mischmaschinen, Tanks und Trichter, die aufgrund bewegter Teile
Vibrationen ausgesetzt sind. AISI 304
Edelstahl-Unterplatte.Ausgestattet mit einem Kugelgelenk,
höhenverstellbar, gegen Seitenkräfte und Kippschutz um eine
Fehlausrichtung der Stützplatten auszugleichen.
danieSchreibmaschinentextVertrieb und Service Schubert
Messtechnik 98547 Kühndorf Dolmarstr. 5 +49(0)36844 30384
[email protected]
Rev
. 0.0
LAUMAS Elettronica srl • Phone: (+39) 0521 683124 • Fax (+39)
0521 681091UFFICIO VENDITE ITALIA: [email protected] • EXPORT
SALES DEPARTMENT: [email protected]
ISO 9001
ISO 14001 www.laumas.com
PSCLSPSCLS
EM12DADOM12x1.75
CLS5000 kg 3
2.5
EM20S(M20x2.5)
PANGOLARE
142
(max
150
)
ATTENZIONE! Massima quota di inserimento bullone per corretto
funzionamento cella*
*CLS1000 - 2000 kg 32.5
EM12DADO(M12x1.75)
ANGOLARE
99 (m
ax 1
11)
*
STRUCTURE
MOUNTING AND PLACING STRUCTURE
STRUCTURE
EM20SM20x2.5
4x Ø13
80
35
15 50 15
120
1590
15
21 140 21
804x Ø16
2014
020
180
182
PSCLS2000
PSCLS
MOUNTING KIT for COMPRESSION-LOW PROFILE load cellsMOUNTING KIT
for COMPRESSION-LOW PROFILE load cells
Finished the installation by means of a copper wire, connect the
upper supporting plate with the lower supporting plate, then
connect all the lower plates to the earthing system.
DIMENSIONS AND TECHNICAL SPECIFICATIONSDIMENSIONS AND TECHNICAL
SPECIFICATIONS
WARNING! Max dimension to insert the bolt to allow the cell to
perform properly
MOUNTING AND PLACING STRUCTURE
T h e C o m p a n y r e s e r v e s t h e r i g h t t o m a ke c
h a n g e s t o t h e t e c h n i ca l d a t a , d ra w i n g s a n
d i m a g e s w i t h o u t n o t i ce.
danieSchreibmaschinentextVertrieb und Service Schubert
Messtechnik 98547 Kühndorf Dolmarstr. 5 +49(0)36844 30384
[email protected]
