Upload
vanida
View
29
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Aug 26, 2003. PPPL: CAD Development of Modular Coils Phase 4. 1/2” Insulation gap was added between housings. 1. 20 Degree segment view. 2. 180 Degree Segment View. 3. Step-Up for connecting surfaces. Coil-Housing surfaces need to be brought inward too aid in clearing the adjacent housing. - PowerPoint PPT Presentation
Citation preview
PPPL:CAD Development of Modular CoilsPhase 4Aug 26, 2003
1
1/2” Insulation gap was added between housings
2
20 Degree segment view
180 Degree Segment View
3
4
Step-Up for connecting surfaces
Coil-Housing surfaces need to be brought inward too aid in clearing the adjacent housing
Surface Clearances
5
11
1113
13
Former collision area
Former collision area
Coil - 11
6
Coil - 12
7
Coil - 13
8
Coil 11 - with 2” flange height
9
Extra room for clamps and cooling channel
* Surfaces not developed
10
Coil 12 - with 2” flange height
* Partially developed surfaces
11
Coil 13 - with 2” flange height
* Partially developed surfaces
12
Collision not yet addressed
Simple edge chamfer should make them clear
13
Section views with 2” flange height