PowPak Dimming Module with EcoSystemPowPak Dimming Module Energi TriPak Series ireless Lighting Control 369-427f 3 04.03.12 ® SPECFCTON SMTTL Page Job Name: Job Number: Model Numbers:

PowPak™ Dimming Module Energi TriPak™ Series Wireless Lighting Control

369-427f 1 04.03.12

® SPECIF ICAT ION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

PowPak™ Dimming Module with EcoSystem®

The PowPak™ Dimming Module with EcoSystem® is a radio frequency (RF) control that operates up to 32 EcoSystem® ballasts based on input from Pico® controls and Radio Powr Savr™ sensors. Configurable for multiple zones in a single area, the Dimming Module with EcoSystem® is ideal for small areas such as classrooms, conference rooms, and private offices.

Communication with RF input devices, such as Pico® controls and Radio Powr Savr™ sensors, is accomplished using Lutron Clear Connect® RF Technology.

Features•Controlsupto32EcoSystem® fluorescent dimming

ballasts and LED drivers•Variousoperatingvoltagesavailable—refertomodel

number chart below for details on voltage requirements•ReceivesinputfromuptoninePico® controls, six

Radio Powr Savr™ occupancy/vacancy sensors, and one Radio Powr Savr™ daylight sensor

•UtilizesLutronClearConnect® RF Technology – refer to model number chart below for frequency band data

•Mountstoajunctionboxthroughastandardhalf-inch(NPT trade size) knockout

•Complieswithrequirementsforuseinacompartment handling environmental air (plenum) per NEC® 2011 300.22(C)(3)

Model Number Operating Voltage Frequency Band RegionRMJ-ECO32-DV-B 120 /277V~ 431.0 – 437.0 MHz U.S.A.,Canada,MexicoURMJ-ECO32-DVB 120 /277V~ 431.0 – 437.0 MHz U.S.A.,Canada,Mexico(BAACompliant)

RMQ-ECO32-DV-B 220-240V~ 433.05 – 434.79 MHz Hong KongRMM-ECO32-DV-B 220-240V~ 868.125 – 868.475 MHz China and Singapore

NOTE: Contact Lutron for frequency band compatibility for your geographic region if it is not indicated above.


369-427f 2 04.03.12


Job Name:

Job Number:

Model Numbers:

Specifications

Regulatory Approvals

RMJ & URMJ- models only•ULListed•UL2043PlenumRated•FCCapproved.ComplieswiththelimitsforaClassB

device, pursuant to Part 15 of the FCC rules.•CSAandIC•COFETEL•NOM

Power

•Operatingvoltage: RMJ & URMJ- model 120/277V~ 50/60Hz40 mA RMQ- model 220-240V~ 50/60Hz40 mA RMM- model 220-240V~ 50/60Hz40 mA

System Communication

•OperatesusingClearConnect™ RF Technology for reliable wireless communication; refer to model number chart on page 1 for frequency band details

•RFrangeis30ft(10m)

Environment

•Ambientoperatingtemperature:32°Fto104°F (0°Cto40°C)

•0%to90%humidity,non-condensing•Forindooruseonly

EcoSystem® Link

•Communicateswithupto32EcoSystem® enabled dimming ballasts, LED drivers, and interfaces such as C5-BMJ-16A

•EcoSystem® Digital Link can be wired Class 1 or Class 2 for maximum wiring flexibility

•Terminalsaccept18to16AWG(0.75 to 1.5 mm2) solid wire

NOTE: Must use Rapid Start sockets with EcoSystem® ballasts.

NOTE: The PowPak™ Dimming Module with EcoSystem® doesNOTsupporttheC5-XPJ-16Aswitchingmodule.

NOTE: WiredsensorsconnectedtoEcoSystem® devices are NOT supported.

Default Operation

•Associatedwirelessinputdevicescontrolall connected EcoSystem® ballasts and drivers

•OccupancySensors: –Occupied:100%;Unoccupied:0%(OFF)•Pico®Controls: –On:100%;FavoriteLevel:50%;Off:0%(OFF)•DaylightSensor:Decreaseselectriclightinresponse

to additional available daylight

Key Design Features

•LEDstatusindicatorsshowcommunicationstatusandprovide programming feedback

•Powerfailurememory:Ifpowerisinterrupted,connected loads will return to the previous level prior to interruption

•EcoSystem®linkmiswireprotectionupto347V~

•Daylightoverride:Pressingtheraisebuttononanassociated Pico® will temporarily override daylighting for the fixtures in that Pico® group

– Daylighting will be re-enabled for that Pico® group whenoneofthefollowingoccurs:

•Twohourshavepassedsincetheoverride.* •ON,OFForPresetbuttonhasbeenpressedona

Pico® controlling that group. •AllassociatedOccupancySensorshavereported

unoccupied. * Eachtimeadaylightingoverrideoccursforany

Pico® group, the two hour timer is reset.


369-427f 3 04.03.12


Job Name:

Job Number:

Model Numbers:

System Diagram

Test

EcoSystem® H-SeriesBallasts

Hi-lume®A-SeriesLED Drivers

Upto32EcoSystem® dimming ballasts and drivers

Radio Powr Savr™ Occupancy Sensor (up to 6)

Radio Powr Savr™ Daylight Sensor (up to 1)

Pico® Control (up to 9)

EcoSystem® digital link

Wiring Diagram

HOT

NEUTRAL

GROUND

E1

E2

To Ballasts

Junction Box

Green

White

Black


369-427f 4 04.03.12


Job Name:

Job Number:

Model Numbers:

Wiring Diagram

Input Voltage

To Ballasts

Conduit Nut

White (Neutral)

Black (Hot)

Green (Ground)

E2E1

NOTE: Use18to16 AWG(0.75to1.5 mm2) solid wire.

PowPak™InstallationInsideJunctionBox (Dimming Module RMJ-ECO32-DV-B shown)

Antenna

BOXA

BOXB

Insomeapplications,aPowPak™modulecanbeinstalledinsidea4 in x 4 in(102 mm x 102 mm)junctionbox.Forinformationabouthowtoperformthisinstallation,pleaseseeApplication Note#423(p/n048423).


369-427f 5 04.03.12


Job Name:

Job Number:

Model Numbers:

Dimensions Dimensionsareshownas:in(mm)

Range Diagram

3.94(100.1)

2.82(71.6)

1.25(31.8)

3.42(86.9)

All Wireless Transmitters must be installed within 30 ft (10 m) of the PowPakTM Dimming Module.

30 ft (10 m)

Maximum

40 ft (12 m)

30 ft

(10

m)

PowPak™ Dimming Module

Installincenterofroomtomaximize RF coverage.

Pico® Wireless Transmitter

•ContactLutronfirstforapplicationsusingfoil-backedormetallicceilingtiles.

Half-inchNPT Trade Size

Radio Powr Savr™ Occupancy Sensor


369-427f 6 04.03.12


Job Name:

Job Number:

Model Numbers:

Advanced Configurations

Pico® Wireless Controls

•UptoninePico® devices, each with their own control group

•Eachgroupcanincludeanyoftheconnectedballastsor drivers

•FavoritelevelscanbesetforeachPico® wireless control

Radio Powr Savr™ Daylight Sensor

•Uptotwodaylightingrowscanbeconfigured•TheRadioPowrSavr™ daylight sensor group can

include up to 32 ballasts or drivers

Minimum Light Level Setting (optional)

•Certainapplications,suchashallways,mayrequirethat the lights never turn off. For these areas, select the10%minimumlightleveloption.

WindowP

ico®

gro

up 1

Pico® group 1

Pico® group 2

Pico® group 3

Occupied

Unoccupied

Pic

o® g

roup

2

Pic

o ® g

roup

3

Window

Window

Off or at 10% Off or at 10%

On Unaffected

Window

Daylighting Row 1

Daylighting Row 2

Test

Test

Window

Pic

o® g

roup

1

Pico® group 1

Pico® group 2

Pico® group 3

Occupied

Unoccupied

Pic

o® g

roup

2

Pic

o ® g

roup

3

Window

Window


On Unaffected

Window

Daylighting Row 1

Daylighting Row 2

Test

Test

High-End Trim•Themaximumlightoutputofconnectedballastscanbedecreasedbyupto50%forenergysavingsin over-lit spaces

•High-EndTrimaffectsallconnectedballastsanddrivers equally, and can be configured from the dimming module or from any associated Pico®

Radio Powr Savr™ Occupancy Sensors•RadioPowrSavr™ occupancy and vacancy sensors

control all connected ballasts or drivers•GroupedPico®controlscanbeusedtoadjust

the Occupied levels of ballasts or drivers that theycontrolfrom1%to100%orcanmakethemunaffected by Occupancy events

•Vacancyevents(areabecomesunoccupied)turnallballastsanddriversofforto10%,ifminimumlightlevel is set

Window

Pic

o® g

roup

1

Pico® group 1

Pico® group 2

Pico® group 3

Occupied

Unoccupied

Pic

o® g

roup

2

Pic

o ® g

roup

3

Window

Window


On Unaffected

Window

Daylighting Row 1

Daylighting Row 2

Test

Test

Window

Pic

o® g

roup

1

Pico® group 1

Pico® group 2

Pico® group 3

Occupied

Unoccupied

Pic

o® g

roup

2

Pic

o ® g

roup

3

Window

Window


On Unaffected

Window

Daylighting Row 1

Daylighting Row 2

Test

Test

Documents

PowPak Dimming Module with EcoSystemPowPak Dimming Module Energi TriPak Series ireless Lighting Control 369-427f 3 04.03.12 ® SPECFCTON SMTTL Page Job Name: Job Number: Model Numbers: