Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
° ° ° °
Smart Tooling, a division of Spintech, LLC, Proprietary Information
Composite can be laid-up directly by hand or automated equipment
onto rigid Smart Tool or cure mold
Smart Tool is extracted when in its elastic state.
Place Smart Tool into heated form mold, pull
vacuum to reset geometry & cool to begin next cycle
Smart Tool remains rigid during initial cure
(≤265F /129C) to set geometry of the part
Smart Tool becomes elastic (>160F / 71C) & pressure is applied to
composite part
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Smart Tooling, a division of Spintech, LLC, Proprietary Information
Smart Tooling, a division of Spintech, LLC, Proprietary Information
→
Smart Tooling, a division of Spintech, LLC, Proprietary Information 14