D310_07142021_NML

AIR COMPRESSOR

Powerful. Durable. Proven. 310 CFM @ 200 PSI of Air Power!

The compact DR 310TM provides an impressive 310 CFM and 200 PSI of air power. Ideally suited for shallow wells where low pressure, low flow is required, the module can be hydraulically or engine driven. Designed for easy maintenance when mounted on the vehicle the DR 310TM is readily available and steadfastly supported by Vanair’s expert service team to keep you up and running!

DR 310TM Unit Cabinet Dimensions (In.): Tank Dimensions (In.):46L X 30W X 30H 14 Diameter X 39HDry Weight (Lbs.): 1385 Dry Weight (Lbs.): 190

Rated Capacity

Pressure

RPM Input

310 CFM (8.4 m3 /min)

200 PSI (13.8 bar)2500 RPM

108 HP (81 kW)

* Consult factory for additional RPM’s

SPECIFICATIONS

FAN POWER REQUIREMENTSInput BHP Required

Compressor Input ShaftFan Driven Method

Vanair reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Vanair, the Vanair logo and MOBILE POWER SOLUTIONS are registered trademarks or trademarks of Vanair Manufacturing, Inc., Michigan City, IN, USA. © 2021 All Rights Reserved.

46.030.0

30.0

39.0

18.0

0.886 PLACES

800.526.8817 | vanair.com

10896 West 300 North | Michigan City, Indiana 46360 USA D310_07142021_NML

PERFORMANCE••

••••

•

310 CFM Up to 200 PSIIndustry Leading Rotary Screw Air CompressorCompact DesignEasy to Operate and MaintainSimple Controls and PipingBuilt for Harsh EnvironmentsMade in the USA

SAFETY••

•

••

High-Temperature ShutdownAir Pressure Relief Safety ValveAutomatic Blowdown on ShutdownOil Fill Plug Safety ReliefMinimum Pressure Valve

CONVENIENCE•

•

•

Mounting Provisions on the Bottom of the FrameHeavy Duty Frame with Integral Forklift TubesPowder Coated, Galvanneal Sheet Metal Enclosure

AIR COMPRESSOR••

•

••

Rotary Screw Air CompressorSingle-StageField Proven PerformanceRecirculating Valve for Noise ReductionDischarge Pipe SAE 2.5-Inch Code 61 Flange with Leak-Free Fittings

DISCHARGE TANK•

•

••

••

Vertical Design for Smaller Footprint and Better Angle of OperationIn-Tank Coalescer for LongevityMinimum Pressure ValvePressure Relief ValveOil Scavenge Sight GlassCoalescer Restriction Indicator

SERVICEABILITY•

•

•

•

Easily Accessible Air Filters and Coalescers for Routine ServiceIndependent Separator Tank for Ease of MaintenanceHinged–Top Roof and Access Panel for Maintenance and AdjustmentsDust Evacuator for Easy Filter Maintenance

AIR FILTER •

•

Dual Two-Stage Air Filters with Dust Evacuators for Clean AirAir Restriction Indicator

OPTIONS••

Drive HubSAE “D” Face Adapter for Hydraulic Motor

INSTRUMENTATION•

•

Conveniently Located, Easy-to-Read Temperature and Pressure GaugeOil Level Sight Glass

AIR-TO-OIL COOLER• Ambient Operating Range of -20 °F to +120 °F

MOUNTING HOLES