Performance Driven. Performance Proven.™The EPDM Power-Wedge® Cog-Belt® by Timken is specially designed for optimum performance:

■■ Durable■■ Oil and heat resistant■■ Static conductive■■ Resists hardening and glazing■■ 60% broader operating temperature range■■ Made in the USA■■ Energy efficient■■ Built to Chek Mate® belt tolerances

for a matched set■■ Backed by “Ironclad Guarantee”

www.carlislebelts.com

Power-Wedge® Cog-Belt®

Heavy Duty V-Belts

Performance Driven. Performance Proven.

Our Power-Wedge® Cog-Belt® is designed for optimum performance. High horsepower ratings translate into greater design flexibility – reducing drive cost, space and weight. The narrow profile permits reduced drive widths and a smaller drive envelope.

Raw edge construction contributes to outstanding operating efficiency. More torque with little or no slippage. The result is savings – in time, in belt life and in energy costs.

The Power-Wedge Cog-Belt meets ARPM standards for static conductivity as well as oil and heat resistance.

The Power-Wedge Cog-Belt is available in 3VX, 5VX, and 8VX cross sections as well as metric sizes SPZX, SPAX, SPBX, and SPCX. Where applicable, belts are dual branded with imperial and metric part numbers.

1

2

4

3

Power-Wedge® Cog-Belt®

The Power-Wedge® Cog-Belt® combines the advantages of narrow belt wedge design with raw edge performance for maximum operating efficiency in a compact drive package. The Power-Wedge Cog-Belt by Timken is now made of EPDM (Ethylene Propylene Diene Monomer), a synthetic rubber with outstanding properties.

Horsepower Ratings Comparison

Power-Wedge Cog-BeltConventional V-Belt

HP

40

30

20

10

0

5V Section Drive, 750 RPM, 1.5.1 Belt Drive Ratio

5/8”

17/32”5VX

3/8”3VX 5/16”

1”

7/8”8VXSPAX 10.0mm

12.7mm 22.0mm

SPCX 18.0mm

16.3mm

13.0mmSPBX

9.7mm

8.0mmSPZX

1 High-Modulus Cords Carries high horsepower loads with minimum stretch. Better belt stability. Fewer take-up adjustments.

2 Precision Molded Cogs Improves belt flex, reduces bending stress. Helps dissipate heat and requires less power. Improves flexibility for increased performance on small diameter pulleys.

3 EPDM EPDM offers superior flex and load carrying capacity. It resists belt cracking and won’t stretch. EPDM has excellent flexibility at high and low temperatures.

4 Raw Edge Sidewalls Produces a higher coefficient of friction. Keeps a tighter grip on the pulley to reduce slippage. Improves performance and efficiency. Reduces vibration for extended component life.

Recommended Pulleys: Hi-Cap Wedge – QD, Taper Bushed, or MST (3V, 5V, 8V)

Horsepower Rating Comparison Power-Wedge Cog-Belt Metric Power-Wedge Cog-Belt

The Timken team applies their know-how to improve the reliability and performance of machinery in diverse markets worldwide. The company designs, makes and markets high-performance mechanical components, including bearings, gears, chain, belts and related mechanical power transmission products and services. www.carlislebelts.com 5M

05-

16:

29

Orde

r No.

109

01 |

TIM

KEN

is

a tr

adem

ark

of T

he T

imke

n Co

mpa

ny. C

ARL

ISLE

is

a tr

adem

ark

used

und

er li

cens

e. |

© 2

016

The

Tim

ken

Com

pany

|

Prin

ted

in U

.S.A

.