POWER TRANSMISSION - MP Filtri

POWER TRANSMISSION PRODUCTS

TO PERFORMPASSION

A WORLDWIDE LEADER IN THE FIELD OF HYDRAULIC FILTRATION EQUIPMENT.

Our company started life in 1964, when Bruno Pasotto decided to attempt to cater for the requests of a market still to be fully explored, with the study, design, development, production and marketing of a vast range of fi lters for hydraulic equipment, capable of satisfying the needs of manufacturers in all sectors.The quality of our products, our extreme competitiveness compared with major international producers and our constant activities of research, design and development has made us a worldwide leader in the fi eld of hydraulic circuit fi ltering.Present for over 50 years in the market, we have played a truly decisive role in defi ning our sector, and by now we are a group capable of controlling our entire chain of production, monitoring all manufacturing processes to guarantee superior quality standards and to provide concrete solutions for the rapidly evolving needs of customers and the market.

A WORLDWIDE LEADER IN THE FIELD OF HYDRAULIC FILTRATION EQUIPMENT.

1

Our customer-oriented philosophy, which enables us to satisfy all customer requests rapidly and with personalized products, makes us a dynamic and fl exible enterprise.The possibility of constantly controlling and monitoring the entire production process is essential to allow us to guarantee the quality of our products.

Our work is based on a skillful interaction between advanced technology and fi ne workmanship, customizing products according to specifi c market requests, focusing strongly on innovation and quality, and following every step in the manufacturing of both standard and special products, fully respecting customer expectations.

Introduction 2

LEADERMARKET

USA

CANADAUNITED KINGDOM

FRANCE

ITALY

GERMANY

INDIA

RUSSIA

P.R. CHINA

WORLDWIDE PRESENCE

8The Group boasts business branches

Our foreign Branches enable us to offer a diversified range of products that allow us to successfully face the aggressive challenge of international competition, and also to maintain a stable presence at a local level.

Introduction3

Introduction 4

TECHNOLOGY

Our constant quest for excellence in quality and technological innovation allows us to offer only the best solutions and services for applications in many fields, including general industry, test rigs, l u b r i c a t i o n , h e a v y e ng i n e e r i n g, r e n ewab l e energ ies, nava l engineering, offshore engineering, aviation systems, emerging technologies and mobile plant (i.e. tractors, excavators, concrete pumps, platforms).

Introduction5

AND PRODUCTION

Our high level of technological expertise means we can rely entirely on our own resources, without resorting to external providers. This in turn enables us to satisfy a growing number of customer requests, also exploiting our constantly updated range of machines and equ ipmen t , f ea tu r i ng fu l ly-automated workstations capable of 24-hour production.

Introduction 6

Flow rates up to 3000 l/min

Pressure up to 20 bar

Mounting:- In-Line- Tank top- In single and duplex designs



Mounting:- In-Line- Tank top


Mounting:- Tank immersed- In-Line- In tank with shut off valve- In tank with � ooded suction


Pressure from 110 bar up to 560 bar

Mounting:- In-Line- Manifold- In single and duplex designs



Mounting:- In-Line- Parallel manifold version- In single and duplex designs

LOW & MEDIUM PRESSURE FILTERS

HIGH PRESSURE FILTERS

SPIN-ON FILTERS



Mounting:- In-Line- Tank top

SUCTION FILTERS

RETURN FILTERS

RETURN /SUCTIONFILTERS

Introduction7

PRODUCT RANGE


Pressure from 320 bar up to 1000 bar

Mounting:- In-Line- Manifold- In single and duplex designs

STAINLESS STEEL HIGH PRESSURE FILTERS

CONTAMINATION MONITORING PRODUCTS

Flow rates from 15 l/min up to 200 l/min

MOBILE FILTRATION UNITS

- Oil � ller and air breather plugs- Optical and electrical level gauges- Pressure gauge valve selectors- Pipe � xing brackets- Pressure gauges

- Aluminium bell-housings for motors from 0.12 kW to 400 kW- Couplings in Aluminium Cast Iron - Steel- Damping rings- Foot bracket- Aluminium tanks- Cleaning covers

POWER TRANSMISSIONPRODUCTS

ACCESSORIES

- Online, in-line particle counters- Off-line Bottle sampling products- Fully calibrated using relevant ISO standards- A wide range of variants to support � uid types and communication protocols

MP Filtri can offer a vast and articulated range of products for the global market, suitable for all industrial sectors using hydraulic equipment.

This includes filters (suction, return, return/suction, spin-on, pressure, stainless steel pressure) and structural components (motor/pump bell-housings, transmission couplings, damping rings, foot brackets, aluminium tanks, cleaning covers).

We can provide all the skills and solutions required by the modern hydraulics industry to monitor contamination levels and other fl uid conditions.

Mobile fi ltration units and a full range of accessories allow us to supply everything necessary for a complete service in the hydraulic circuits.

POWER TRANSMISSION PRODUCTS

Introduction 8

INDEX

LMG

LMC - LDC

LMS - LDS

MULTI-COMPONENTS

General Information

Bell-housing with rectangular flange

Bell-housing for piston, screw and vane pumps

Bell-housing - Low Noise

Bell-housing - Multi-components 2 - 3

BELL-HOUSING

46

51

63

71

79

page45

ANM A

PDM A

MPDR PDMA - MPDR

OB

SE10

Damping rings

Foot brackets

Damping rods

Cleaning covers

Aluminium tanks

ACCESSORIES

102

104

105

106

111

page101

COMPANY

PRODUCT RANGE

BELL-HOUSING & COUPLING SIZING

SELECTION SOFTWARE

INTRODUCTION

1

6

10

12

page1

SGEA - SGEG - SGES - EGE

SGDR - EGR

General Information

Flexible half-couplings

Gear couplings

COUPLINGS

16

21

39

page15

Introduction9

BELL-HOUSING & COUPLING SIZINGA GUIDE TO SELECT THE CORRECT BELL-HOUSING AND DRIVE COUPLING

- Electric motor power/motor size- Manufacturer and pump type

Pages 63 ÷ 69 for IEC Electric motor size 100-112 - LMC250

LMC 250 bell-housing with height ≥ 135.5 - LMC250AFSQ

The bell-housing code must be completed with pump drilling code (see pages 48-49).For the specific case:Spigot hole 82.55 - PCD 106.4 - Nr.2 holes M10 : Drilling code 060

Definitive bell-housing code LMC250AFSQ060

Pages 71 ÷ 77 for IEC Electric motor size 100-112 - LMS250

LMS 250 bell-housing with height ≥ 135.5 - LMS250AFSA

The bell-housing code must be completed with pump drilling code (see pages 48-49).For the specific case:Spigot hole 82.55 - PCD 106.4 - Nr.2 holes M10 : Drilling code 060

Definitive bell-housing code LMS250AFSA060

1 - Pump and motor shaft dimensions (see electric motor data sheet)2 - Shaft and flange pump (see pump data sheet)

Example:- Electric motor 2.2 kW - size 100-112- Atos pump code PFE31 - Shaft 1

DATA REQUIRED

Bell-Housing’s length calculation

Case ASolution with monobloc bell-housing series LMC/LDC

Case BSolution with low noise bell-housing series LMS/LDS

TO VERIFY:

- H = 60 + 18 + 57.5 = 135.5 mm (18 = Sp spider - see page 31)

- Choose type of bell-housing (LMC - LMS): For monobloc bell-housing LMC/LDC series see pages 63 ÷ 69 For Low noise bell-housing LMS/LDS series see pages 71 ÷ 77 For Multi-components 2-3 bell housing series see pages 79 ÷ 99

Note: The length of bell-housing must be ≥ than the length calculated (135.5 mm)

IEC Electric motor dimension Hydraulic pump dimension

ø28 - key 8

ø19.05 - key 4.76ø250

60 57.5

9.5ø82.55

ø106.4

Nr.2ø11

code M05 see page 18

code G01 see page 18

Introduction 10

BELL-HOUSING & COUPLING SIZINGA GUIDE TO SELECT THE CORRECT BELL-HOUSING AND DRIVE COUPLING

Motor half-coupling (see page 26)For IEC Electric motor size 100/112, the half-coupling is SGEA21M05060FG

Spider (see page 31)For SGEA21, EGE2 - EGE2RR(choose spider material on the base of the application, oil, temperature and cycle machine, etc.)

Pump half-couplingChoose the drilling code - see pages 18-19 for shaft 19.05 - key 4.76 - code: G01

Pump half-coupling length = BH length - THK Spider - THK Spigot LMC = 138 mm - 60 - 18 - 9.5 = 50.5 mm LMS = 148 mm - 60 - 18 - 9.5 = 60.5 mm

LMC - Choose the half-coupling’s length at page 26 ≤ 50.5 mm.LMS - Choose the half-coupling’s length at page 26 ≤ 60.5 mm.LMC - Available length for SGEA21 = 50 mmLMS - Available length for SGEA21 = 60 mmHalf coupling for LMC: SGEA21G01050FGHalf coupling for LMS: SGEA21G01050FG

Coupling selection

SOFTWARE FOR AUTOMATIC CALCULATION

available on the web site www.mpfiltri.com

Note: for multi pumps we recommend to use a specific support on the base of the pump’s dimensions and weight.

Introduction11

BELL-HOUSING & COUPLING SIZING Selection Software

Select “BELL-HOUSING & COUPLING”Step 1

Choose Coupling materialStep 4

Choose Manufacturer: select “Pump type” and “Pump model”

Step 2

Choose nr° of poles of “Electric motors”: select “Electric motors type” and “Electric motors size”

Step 3

Introduction 12

BELL-HOUSING & COUPLING SIZINGSelection Software

Download PDF Datasheet and “DXF Drawing” of your selection

Step 7

Push “CLICK HERE TO PROCEED”, then choose best solution for your application.Step 5

Sec. A-A

Ques

todo

cum

ento

e'di

prop

rieta

' dell

aM

Pfilt

riS.

p.A.

-Sen

zaau

toriz

zazio

nesc

ritta

della

stess

ano

npo

tra' e

sser

eut

ilizza

tope

rla

costr

uzion

ede

ll'ogg

etto

rapp

rese

ntat

one

venir

eco

nunic

ato

ate

rzi.

Laso

cieta

'pro

priet

aria

tute

laip

ropr

idirit

tiarig

ore

dileg

ge.

Allp

ropr

ietar

yrigh

tsre

serve

dbyM

Pfilt

riS.p.

A.-T

hisdr

awing

shall

notb

erep

rodu

ced,

orin

anyw

ayuti

lized

,fort

hema

nufac

tureo

fthec

ompo

nent

orun

ither

einillu

strate

dand

must

notb

erele

ased

tooth

erpa

rties,

witho

utwr

ittenc

onse

nt.A

nyinf

ringe

ment

willb

eleg

allyp

ursu

ed.

Revis

ioni/M

odific

ation

Per errori ammissibili di quotesenza tolleranze e per altre prescrizioni generali vediUNI EN 22768-1/1996 - f

For the permissible errors on thedimensions without tollerance andfor other general specifications .See UNI EN 22768-1/1996 - f

Data/Date

Data/Date

Q.tà/Qty

Disegnato/Drawn.

Controllato/Checked

Peso/Weight

Scala/Scale

N° Disegno/Drawing No.

Dis.grezzo/Raw Componente/ComponentNorma di collaudo/Tested std.

Denominazione/Description

Trattamento/Treatment

Sostituisce/Supersedes

Prodotto/Product

Materiale/Material

REV. Tav./Sht.

di/of

20/02/2017

1:2

1 1

FORMAT

A3

A

A

B.O.M.DESCRIPTIONCODEQTYITEM

Monobloc BellhousingLMC350AFSU0721ASpiderEGE51BMotor Half CouplingSGEA51D02045FG1CPump Half CouplingSGEA51M07109FG1D

140

300

Nr. 4 holes M16

350

Ø

250

Ø

21.hC-

Ø24

54,5

109 26 45

8 M

31

194

100

Ø

8.hC-

Ø52

Nr.2 holes M12

AKMM05Z0007Complete kit for:-IEC Electric Motor Size 160-Pump Bosch Rexroth A10VSO45 shaft P C.a. 7Kg

Complete Kit

Ø

Ø

Revis

ioni/M

odific

ation

Push “PREVIEW” to download the reports.Step 6

Insert pump’s dimension on the section

“INSERT PUMP” and follow the instructions

to achieve the couplings components code

You can’t fi nd the pump on the system?

Introduction13

Drive couplings provide the means by which power is transmitted from the electric motor to the hydraulic pump.

By virtue of their fl exible structure, they are able to compensate angular and radial misalignments between motor and pump, and appreciably attenuate the noise generated through the drive line.

The couplings illustrated are available in aluminium and cast iron versions, with a variety of spider options, and will cover a range of applications using electric motors from size 63, rated 0.15 kW, up to size 400 rated 400 kW.

Grub screw on all half-couplings.Cast iron half-coupling SGEG available with screw mounted.Steel half-couplings SGES and SGDR available with screw.

Standard ATEX 2014/34/EUHalf-couplings are available to use in hazardous area.The couplings are certifi ed according to Standard ATEX 2014/34/EU - Category certifi ed 2G - Area 1 and 2.Other information available on our web site “www.mpfl tri.com”.

The half-couplings SGE*** series are in conformity to normative DIN 740/2.The max torque to transmit is always less than the max torque that the coupling can transmit.

Couplings 14

Couplings

SGEA - SGEG - SGES - EGE

SGDR - EGR

GENERAL INFORMATION

21

39

16page

Couplings15

GENERAL INFORMATION SGE SERIES

Admissible misalignment radial, angular and axial

Standard ATEX 2014/34/EU

MP Filtri couplings are developed with:

The half-couplings series SGE*** allow secure transmission between the electric motor and the driven side; they are able to absorb shocks and vibration, in addition to compensating radial misalignment, angular and axial.

The assembly of the couplings can be horizontal/vertical, withstanding vibration and load reversals.

The complete range of couplings are extrapolated from the on-line software, with a length equal than the shaft on which must be mounted and they are completed with grub screw for fixing located on the key.

Available for cylindrical shaft with metric and imperial dimensions as well for splined shafts as per specification DIN, ISO and SAE.

Half-couplings are available to use in hazardous area.The couplings are certified according to Standard ATEX 2014/34/EU - Category certified 2G - Area 1 and 2.Other information available on our web site “www.mpfiltri.com”.

Drawings 3D available on website www.mpfiltri.com at section TOOLS.

CAD 3D FEM

Max admissible radial misalignment Max admissible angular misalignment Max admissible angular alignment

SGE * 01SGE * 21SGE * 31SGE * 40SGE * 51SGE * 60SGE * 80SGE * 90

0.51.01.01.01.51.52.02.0

Half-coupling R [mm]SGE * 01SGE * 21SGE * 31SGE * 40SGE * 51SGE * 60SGE * 80SGE * 90

1.5°

Half-coupling ß [°]SGE * 01SGE * 21SGE * 31SGE * 40SGE * 51SGE * 60SGE * 80SGE * 90

2.02.53.03.53.53.54.05.0

Half-coupling A [mm]

Couplings 16

Small pumps, uniform load, low operating pressurese.g. rotary action machine tools - 5/8 work cycles per hour

Small pumps, uniform load, high working pressurese.g. lifting equipment - 120-150 work cycles per hour

Pumps, non-uniform loade.g. lifting equipment - 280-300 work cycles per hour

GENERAL INFORMATIONSIZING

Examples verification of the coupling

Select the half-coupling of the calculated size from the motor half-couplings table.Note: When selecting the coupling, remember that for pumps with splined shaft, only cast iron couplings of the SGEG series can be used.

1.3

1.5

1.7

Mt: 9560 x kW / rpm = NmMe > Mt x S = NmWhere:Mt: Torque transmitted by electric motorMe: Torque transmitted by couplingkW: Power of electric motorRpm: Revolutions per minute of electric motorS: Service factor

ExampleElectric motor, 4 pole - 4 kWhydraulic pump, uniform load, low operating pressureMt: 9560 x 4 / 1500 = 25.45 NmMe > 25.49 x 1.3 = 33 Nm

Half-coupling SGEA21 meets the above requirement.

Torque transmitted by electric motor:

Table 1

Determine the size of the coupling according to the type of installation and application envisaged, on the basis of the formulas and the following tables:

Nominal and maximum torque values are referred to couplings assembled with standard flexible spiders of the EGE** series (see page 31). Where higher torques are to be transmitted, use flexible spiders of the EGE**RR series (see page 31).

Table 2

SGEA01SGEA21SGEA31SGEA51 ALUMINIUM

CAST IRON

STEEL

SGEG01SGEG30SGEG40SGEG60SGEG80SGEG90

SGES40SGES60SGES80

436875

109.5

15160340550

20190380620

408095

120160200

20400550760

22005500

30450620850

25006100

95120180

550760

2200

620850

2500

Half-coupling type

External diameter[mm]

Nominal torque Me - Nm

Maximum transmissible torque Me - Nm

Couplings17

GENERAL INFORMATION PUMP SHAFT CODES

Parallel shaft - Metric Dimensions Parallel shaft - Imperial Dimensions

C00C01C02C03C04C05C06C07C08C09C10C11D00D01D02D03D04D05D06D07D08D09D10D20E00E01E02E03E04E05E06E07M00M01M02M03M04M05M06M07M08M09M10M11M12M13M14M15M16M17M18

121516161718201930201615222425303235404550702252

810223235822563

9111419242838424855606575809095

100110

85

45455655

106546688

101012141420

816

33588

227

18345688

10121416181820222525282822

ø [mm] key [mm] Code

Parallel shaft - Double Key

C02***2H

C06***2M

C07***2L

D01***2N

D03***2P

G02***2E

G04***2F

G06***2G

16.00

20.00

19.00

24.00

30.00

22.22

25.40

31.75

4.005.005.006.005.006.006.008.008.00

10.004.766.356.354.766.357.94

ø [mm] key [mm] Code

profile

key

key

ø

key

ø

DOUBLE KEY VERSION

*** = coupling length

G00G01G02G03G04G05G06G07G08G09H00H01H02H03H04H05H06H07H08H09L00L01L02L03L04L05L06L07L08L09L10L15

7/16”3/4”7/8”7/8”1”1”

1 1/4”1 1/4”1 3/8”1 1/2”1 5/8”1 3/4”

2”2 11/32”

3/4”1”

5/8”17/32”11/16”

1/2”5/8”7/8”

11/8”3/4”

1 7/8”3 3/8”2 3/8”2 3/8”2 7/8”3 5/8”1 5/8”1 1/8”

11.11 19.0522.2222.2225.4

25.4031.7531.7534.9438.1

41.2744.4550.8

53.9419.0225.4

15.8713.4517.4612.7

15.8722.2228.5819.0547.6385.7360.3360.3373.0392.0741.6

28.58

1/8”3/16”3/16”1/4”

3/16”1/4”1/4”

5/16”5/16”3/8”3/8”

7/16”1/2”1/2”1/8”

3/16”3/16”1/8”

3/16”1/8”

5/32”5/32”1/4”1/4”1/2”7/8”5/8”1/2”3/4”7/8”

15/32”5/16”

3.184.764.766.354.766.356.357.947.949.529.52

11.1112.712.73.174.764.763.184.763.183.97

46.356.3512.7

22.2315.8812.7

19.0522.22

127.94

ø key Code[inch] [inch][mm] [mm]

Couplings 18

GENERAL INFORMATIONPUMP SHAFT CODES

SAE Bore - ANS.B.92.1-1970 Splined bore as per standard DIN5480

PD01PD02PD03PD04PD05PD06PD07PD08PD09PD10PD11PD12PD13PD14PD15PD16PD17PD18PD19PD20PD21PD22PD23PD24PD25PD26PD27PD28PD29PD30PD31PD32PD33PD34PD35PD36PD37

PA01PA02PA03PA04PA05PA06PA07PA08PA09PA10PA11PA12PA13PA14PA15PA16PA17PA18PA19PA20PA21PA22PA23PA24PA25PA26PA27PA28PA29PA30

17 th 8/1614 th 12/2416 th 12/2417 th 12/249 th 16/3211 th 16/3212 th 16/3213 th 16/3215 th 16/3221 th 16/3223 th 16/3227 th 16/3240 th 16/3220 th 24/4821 th 24/4823 th 24/4825 th 24/4826 th 24/4827 th 12/4828 th 24/4829 th 24/4832 th 24/4821 th 32/6430 th 32/6433 th 32/6423 th 40/8036 th 48/9641 th 48/9647 th 48/9613 th 8/1615 th 8/1614 th 16/3240 th 16/3233 th 16/329 th 20/4010 th 16/3225 th 20/40

W18 x 1.25 x 13W20 x 1.25 x 14W25 x 1.25 x 18W28 x 1.25 x 21W32 x 1.25 x 24W38 x 1.25 x 29W30 x 2 x 14W32 x 2 x 14W35 x 2 x 16W37 x 2 x 17W38 x 2 x 18W40 x 2 x 18W42 x 2 x 18W45 x 2 x 21W50 x 2 x 24W55 x 2 x 26W60 x 2 x 28W70 x 2 x 34W80 x 2 x 38W60 x 3 x 18W70 x 3 x 22W75 x 3 x 24W90 x 3 x 28W105 x 3 x 34W80 x 3 x 25W50 x 1.25 x 38W62 x 1.25 x 48W40 x 1.5 x 25W32 x 1.5 x 20W40 x 1.25 x 30

171416179

11121315212327402021232526272829322130332336414713151440339

1025

131418212429141416171818182124262834381822242834253848252030

Profile ProfileNr. of Th Nr. of ThCode Code

Splined bore as per standard DIN5482

PB01PB02PB03PB04PB05PB06PB07PB08PB09PB10PB11PB12PB13PB14PB15PB16PB17PB18PB19PB20PB21PB22PB23PB24PB25PB26PB27PB28PB29PB30PB31PB32PB33PB34PB35PB36

A15 x 12A17 x 14A18 x 15A20 x 17A22 x 19A25 x 22A28 x 25A30 x 27A32 x 28A35 x 31A38 x 34A40 x 36A42 x 38A45 x 41A48 x 44A50 x 45A52 x 47A55 x 50A58 x 53A60 x 55A62 x 57A65 x 60A68 x 62A70 x 64A72 x 66A75 x 69A78 x 72A80 x 74A82 x 76A85 x 79A88 x 82A90 x 84A92 x 86A95 x 89A98 x 92A100 x 94

89

10121314151617181920212223242526272829303132333435363738394041424344

Profile Nr. of Th Code

Splined bore as per standard DIN5481

PC01PC02PC03PC04PC05PC06PC07PC08PC09

8 x 1010 x 1212 x 1415 x 1717 x 2021 x 2426 x 3030 x 3460 x 65

283031323334353641

Profile Nr. of Th Code

*** = coupling length

Couplings19

Couplings 20

SGEA - SGEG - SGES - EGEseries

Aluminium - Cast Iron - Steel couplings

Couplings

Couplings21

Technical data

SGEA-SGEG-SGES-EGE

SGEA: Pressure die cast aluminiumSGEG: Cast Iron en-GJL-250 (gg25)SGES: Steel C40

Half-couplings materials

- Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version

Compatibility with fluids

Spider oil-resistant rubber: from -20 °C to +90 °CSpider polyurethane resin: from -30 °C to +120 °C

Temperature

Any applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department

Special Applications

For temperatures outside this range, contact MP Filtri Technical and Sales Department

NoteEGE** series: Oil-resistant NBR 85 Shore A - black colourEGE**RR series: in polyurethane Laripur - 92 Shore A - LPR202-95A - red colour

Spider materials

GENERAL INFORMATION

Couplings 22

SGEA-SGEG-SGES-EGE

Range

GENERAL INFORMATION

IEC 63 ø 140 - ø 11x23IEC 71 ø 160 - ø 14x30IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 110 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140

IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170IEC 355 ø 800 - ø 90x170

3

Shaft ISO 3019-2

Shaft DIN 5480

Shaft ISO 3019-2

Shaft DIN 5481

Shaft ANSI B92. 1A 1976

Shaft DIN 5482

0.5 1 2

G25 UNI 5007 Cast Iron - C40 Carbon Steel

European standard size3.5 4

IEC Electric Motorssize

IEC Electric Motorssize

Aluminiun

German standard sizeZB ZF ZG

Couplings23

SGEA-SGEG-SGES

Pump half-coupling

Pump half-coupling

Series and material

Series and material

Size

Size

Configuration example:


SGE

SGE

FG

Groub screw (necessary for SGEA series only)

G

S

S

FG

SGE

SGE

A

G

Cast Iron

Steel

21 30

30

30

30

Steel

31 40

40

40

40

80

80

80

80

51 60

60

60

60

90

90

90

90

See page 18 (parallel shaft - double key)

Aluminium

Cast Iron

01 01

01

01

01

PUMP HALF-COUPLING FOR PARALLEL SHAFT

PUMP HALF-COUPLING FOR SPLINED SHAFT

Pump shaft code

Pump shaft code

Double key way (available combinations only)

Length

Length

G02

PD02

2E

050

050

See pages 26 ÷ 30

See page 18

See pages 28 ÷ 30

See pages 19

2EG02

PD02

050

050

A

G

21

40

Designation & Ordering code

SGEA

SGEG

SGEG

SGES

SGES

Couplings 24

IEC ELECTRIC MOTORSCouplings for standard IEC motors, protection class IP 54 / IP 55

SGEA-SGEG-SGES

0.320.410.620.861.31.92.53.75

7.4

9.8

131825

36496071

97120

145177241289353423513641

80210101140128016001790202022702560

A. C. motor 50 Hz

56

63

71

80

90S90L

100L

112M

132S

132M

160M

160L180M180L

200L

200S225M250M280S280M315S315M

315L

315

355

400

SizeShaft end dxl [mm]

9 x 20

11 x 23

14 x 30

19 x 40

24 x 50

28 x 60

38 x 80

42 x 110

48 x 110

55 x 110

2-pole 4, 6, 8 pole

Motor output n=3000 RPM 2 poles

Output P[kW]

TorqueT [Nm]

55 x 110

60 x 140

65 x 140

75 x 140

80 x 170

60 x 140

65 x 140

75 x 140

80 x 170

85 x 170

95 x 170

110 x 210

0.090.120.180.250.370.550.751.11.52.2

3

45.57.5

1115

18.522

3037

45557590

110132160200

250315355400500560630710800

0.430.640.881.31.82.53.75.17.51015202736

49

72

98121144196

240292356484581707849

10301290

160020202280257032103580403045405120


Output P[kW]

TorqueT [Nm]

0.060.090.120.180.250.370.550.751.11.52.234

5.5

7.5

11

1518.52230

3745557590

110132160200

250315355400500560630710800

0.430.520.71.12

2.83.95.88

12

15

22

30

4055

75

109

148181215

293361438535727873

10701280155019302410

304038504330481053906060


Output P[kW]

TorqueT [Nm]

0.0370.0450.060.090.180.250.370.550.751.1

1.5

2.2

3

45.5

7.5

11

1518.522

303745557590

110132160200250

315400450500560630

1.41.82.53.55.37.911162130

40

5474

100

145198

244290392483587712971

11701420171020702580

322040604570515057906420


Output P[kW]

TorqueT [Nm]

0.090.120.180.250.370.550.751.11.52.2

3

45.57.5

1115

18.522303745557590

110132160200

250315355400450500

Couplingsize

01

21

31

40/51

60

80

90

Couplingsize

01

21

31

40/51

60

80

90

Couplingsize

01

21

31

40/51

60

80

90

Couplingsize

01

21

31

40/51

60

80

90

Couplings25

Dimensions

Motor half-coupling

Pump half-couplings

44.0 21 11 4 M5 44.0 28 14 5 M5 44.0 40 19 6 M5 70.0 40 19 6 M6 44.0 48 24 8 M5 70.0 48 24 8 M6 70.0 60 28 8 M6 85.0 60 28 8 M8 70.0 80 38 10 M6 85.0 77 38 10 M8 109.5 77 38 10 M8 109.5 109 42 12 M8 109.5 109 48 14 M8 109.5 109 55 16 M8

SGEA01M01019FGSGEA01M02028FGSGEA01M03040FGSGEA21M03040FGSGEA01M04048FGSGEA21M04048FGSGEA21M05060FGSGEA31M05060FGSGEA21M06080FGSGEA31M06077FGSGEA51M06077FGSGEA51M07109FGSGEA51M08109FGSGEA51M09109FG

0.070.080.120.300.130.280.330.480.440.781.601.601.601.90

Weight [kg]De L ø key FGIEC - Electric motors

6371

80

90

100 - 112

132

160180200

Motor size Shaft end [d x l]11x2314x30

19x40

24x50

28x60

38x80

42x11048x11055x110

Dimensions [mm]Half-coupling code

SGEA Aluminium

Notes: - Screw not included- Double key version pump side only

Double key versionkey

De

ø ø

key

key

11 19 44.0 17 50 15 24 70.0 23 50 25 28 70.0 40 60 18 32 85.0 40 60 38 42 85.0 60 80 18 40 109.5 40 70 38 55 109.5 70 109

SGEA01 *** ***SGEA21 *** ***SGEA21 *** ***SGEA31 *** ***SGEA31 *** ***SGEA51 *** ***SGEA51 *** ***

Half-coupling code Standard lengths [mm]ø min ø max De L min L max FG

M5M6M6M8M8M8M8

Complete the half-coupling code with the shaft’s code and lengthExample: SGEA51D02040FG

D02 - see page 18040 - table “pump half-coupling - standard lengths”

Dimensions [mm]

17354042604270

23404245654575

30424448704880

40444850775085

44485052805290

48505555-

5595

--5858-58

100

--6060-60

105

-----65

109

-----

70-

Couplings 26

Half-coupling for gear pumps - tapered

Half-coupling for gear pumps - parallel

Weight [kg]

Weight [kg]

ConicalDimensions [mm]

Dimensions [mm]

44.0 14.5 16.0 9.7 2.4 44.0 16.0 16.0 13.9 3 44.0 11.5 14.5 9.8 2 70.0 14.5 21.5 9.7 2.4 70.0 18.5 21.5 13.9 3 70.0 21.5 21.5 17.2 3.2 - 4 70.0 20.0 21.5 16.9 3 70.0 27.0 41.0 21.6 4 85.0 14.5 37.0 9.7 2.4 85.0 17.5 36.0 13.9 3 85.0 23.0 37.0 17.2 3.2 - 4 85.0 27.0 37.0 21.6 4 85.0 35.0 37.0 25.6 4.76 - 5 85.0 17.0 37.0 16.9 3 85.0 27.0 34.0 25.2 5 109.5 23.5 32.0 17.2 3.2 - 4 109.5 25.0 32.0 21.6 4 109.5 32.0 32.0 25.6 4.76 - 5 109.5 19.5 32.0 16.9 3 109.5 25.0 32.0 24.6 5

44 10.0 17.0 6 2 44 10.0 17.0 7 2 44 - 17.0 12 3 70 14.5 21.5 12 3 85 14.5 37.0 12 3

SGEA01FS100SGEA01FS1M0SGEA01FSZBR SGEA21FS100SGEA21FS1M0SGEA21FS200SGEA21FSZFRSGEA21FS300 SGEA31FS100SGEA31FS1M0SGEA31FS200SGEA31FS300SGEA31FS350SGEA31FSZFRSGEA31FSZGR SGEA51FS200SGEA51FS300SGEA51FS350SGEA51FSZFRSGEA51FSZGR

SGEA01FS05MSGEA01FS05CSGEA01FS1C0SGEA21FS1C0SGEA31FS1C0

0.120.300.280.330.781.601.601.601.900.330.480.781.601.601.601.901.901.601.901.90

1:81:8 1:51:8 1:81:81:51:81:8 1:81:81:81:81:51:51:81:81:81:51:5

0.070.080.130.481.90

Half-coupling code

Half-coupling code

Dimensions

Aluminium SGEA

key

key

ø co

n.

key

De

De

øDe

De

L

L

L1

L1

ø

ø

key

key

Couplings27

Motor half-coupling

0.320.420.610.772.352.653.153.554.704.554.359.00

12.3012.0018.3017.7021.0020.6020.0019.0018.00

Weight [kg]IEC - Electric motors

63718090

100 - 112

132

160180

200

225

250

280

315

355400

Motor size Shaft end [d x l]

11x2314x3019x4024x50

28x60

38x80

42x11048x110

55x110

60x140

65x140

75x140

80x170

95x140100x210


Pump half-couplings

SGEG01 *** ***SGEG30 *** ***SGEG40 *** ***SGEG60 *** ***SGEG80 *** ***SGEG90 *** ***

Half-coupling code

every 5 mm

All SGEG series half-couplings are supplied with a grub screw hole as standard, and with a grub screw UNI 5929 DIN 916 fitted to the hub.Note: For lengths other than those indicated in “Pump half-coupling” table, contact MP Filtri Technical and Sales Department.

SGEG Cast IronDimensions

Complete the half-coupling code with the shaft’s code and lengthExample: SGEG40PD02040

PD02 - see page 19040 - table “pump half-coupling - standard lengths”

Notes: - Screw included- Double key version only pump side

keykey

ø

øke

y

De

- 24 40 20 50 - 42 80 30 80 - 55 95 30 110 - 75 120 40 140 - 85 160 50 170 - 100 200 40 100

ø min ø max De L min L maxDimensions [mm]

De L ø key FG

Splined shaft

Standard lengths [mm]

Double key version

SGEG01M01021 SGEG01M02028 SGEG01M03040 SGEG01M04050 SGEG30M05060 SGEG40M05060 SGEG30M06080 SGEG40M06080 SGEG40M07110 SGEG40M08110 SGEG40M09110 SGEG60M09110 SGEG60M10140 SGEG60M11140 SGEG80M11140 SGEG80M12140 SGEG90M12100 SGEG80M13170 SGEG90M13100 SGEG90M15100 SGEG90M16100

44 21 11 4 M6 44 28 14 5 M6 44 40 19 6 M6 44 50 24 8 M6 80 60 28 8 M8 95 60 28 8 M8 80 80 38 10 M8 95 80 38 10 M8 95 110 42 12 M8 95 110 48 14 M8 95 110 55 16 M8 120 110 55 16 M8 120 140 60 18 M8 120 140 65 18 M8 160 140 65 18 M8 160 140 75 20 M10 200 100 75 20 M10 160 170 80 22 M10 200 100 80 22 M10 200 100 95 25 M10 200 100 100 28 M10

Couplings 28

Motor half-coupling

0.320.420.610.772.352.653.153.554.704.554.359.0012.3012.0018.3017.7021.0020.6020.0019.0018.00


63718090

100 - 112

132

160180

200

225

250

280

315

355400


11x2314x3019x4024x50

28x60

38x80

42x11048x110

55x110

60x140

65x140

75x140

80x170

95x140100x210


Pump half-couplings

SGES01 *** ***SGES30 *** ***SGES40 *** ***SGES60 *** ***SGES80 *** ***SGES90 *** ***

Half-coupling code

every 5 mm

All SGES series half-couplings are supplied with a grub screw hole as standard, and with a grub screw UNI 5929 DIN 916 fitted to the hub.Note: For lengths other than those indicated in “Pump half-coupling” table, contact MP Filtri Technical and Sales Department.

Steel C40 SGESDimensions

Complete the half-coupling code with the shaft’s code and lengthExample: SGES40PD02040

PD02 - see page 19040 - table “pump half-coupling - standard lengths”


keykey

ø

øke

y

De

- 24 40 20 50 - 42 80 30 80 - 55 95 30 110 - 75 120 40 140 - 85 160 50 170 - 100 200 40 100

ø min ø max De L min L maxDimensions [mm]

De L ø key FG

Splined shaft

Standard lengths [mm]

Double key version

SGES01M01021 SGES01M02028 SGES01M03040 SGES01M04050 SGES31M05060 SGES40M05060 SGES31M06080 SGES40M06080 SGES40M07110 SGES40M08110 SGES40M09110 SGES60M09110 SGES60M10140 SGES60M11140 SGES80M11140 SGES80M12140 SGES90M12100 SGES80M13170 SGES90M13100 SGES90M15100 SGES90M16100

44 21 11 4 M6 44 28 14 5 M6 44 40 19 6 M6 44 50 24 8 M6 80 60 28 8 M8 95 60 28 8 M8 80 80 38 10 M8 95 80 38 10 M8 95 110 42 12 M8 95 110 48 14 M8 95 110 55 16 M8 120 110 55 16 M8 120 140 60 18 M8 120 140 65 18 M8 160 140 65 18 M8 160 140 75 20 M10 200 100 75 20 M10 160 170 80 22 M10 200 100 80 22 M10 200 100 95 25 M10 200 100 100 28 M10

Couplings29

SGES*GO Steel C40

Motor half-coupling

95 50 38 10 M8 95 65 42 12 M8 95 65 48 14 M8 120 85 55 16 M10 120 85 60 18 M10 120 85 65 18 M10 120 85 75 20 M10 160 85 80 22 M10

SGES40M06050G0 SGES40M07065G0SGES40M08065G0SGES60M09085G0SGES60M10085G0SGES60M11085G0SGES60M12085G0SGES80M13085G0

4.005.005.008.008.008.008.00

13.00


132160180200225250280315


38x8042x11048x11055x11060x14065x14075x14080x170

Pump half-couplings

- 55 95 35 - 65 120 65 - 75 160 85

SGES40 *** ***SGES60 *** ***SGES80 *** ***

Half-coupling code

Complete the half-coupling designation with the pump interface code and the length.Example: SGES40PD02035GO (see page 19).

Dimensions

key

ø De

L

Dimensions [mm]Half-coupling code De L ø key Screw

ø min ø max De LDimensions [mm]

Splined shaft

Couplings 30

Spiders EGE

Version for extreme temperatures available on request.For further information, contact MP Filtri Technical and Sales Department.

EGE** series

15 40 16 18 65 25 22 80 35 26 105 45 24 95 40 28 120 55 38 160 75

SGEA01 - SGEG01SGEA21SGEA31 - SGEG30SGEA51SGEG40 - SGES40SGEG60 - SGES60SGEG80 - SGES80

0.0060.020.040.060.090.130.36

ø max Weight [kg]Nominal torque

NmDimensions [mm]

Half-coupling code E DeEGE0EGE2EGE3EGE5EGE4EGE6EGE8

Code

1095

190310310430

1250

Max torqueNm

20190380620620860

2500

EGE**RR series

15 40 16 18 65 25 22 80 35 26 105 45 24 95 40 28 120 55 38 160 75 48 200 95

SGEA01 - SGEG01SGEA21SGEA31 - SGEG30SGEA51SGEG40 - SGES40SGEG60 - SGES60SGEG80 - SGES80SGEG90

0.0060.020.040.060.090.130.360.59

ø max Weight [kg]Nominal torque

NmDimensions [mm]

Half-coupling code E DeEGE0RREGE2RREGE3RREGE5RREGE4RREGE6RREGE8RREGE9RP

Code

15115250400380550

14008900

Max torqueNm

30230500800760

110029009900

Dimensions

Notes: Made in polyurethane Laripur - LPR202-95A, red colour, are suitable for applications where high levels of torque are transmitted.

Notes: Made of black oil-resistant rubber, these components serve to interconnect the two halves (motor - pump) of a flexible coupling.

E

E

ø maxSplined with key

ø maxSplined with key

De

De

Couplings31

Metric cylindrical finish bore H7 Keyway to DIN 6885 sheet 1 (JS9)

01

21

31

40

51

60

80

90

Size Materials

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

8 3

9 3

10 3

11 4

12 4

13 5

14 5

15 5

15 4

16 4

16 5

16 5

17 5

18 6

19 5

19 6

20 5

20 6

22 6

22 8

22 5

246

24 8

25 8

25 7

01

21

31

40

51

60

80

90

Size Materials

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

95 25

30 10

30 8

32 10

32 8

35 10

35 8

38 10

40 12

42 12

45 14

48 14

50 14

52 16

55 16

60 18

63 18

65 18

70 20

75 20

8022

82 22

90 25

100 28

28 8

Half-coupling bore sizes

Diameter / Key [mm]

Diameter / Key [mm]

SGEA-SGEG-SGES

•

•

•

•

•

•

•

•

•

••

•

•

•

•

•

••

•

•

•

•

•

••

•••

•

•

•

•

•

•

•

•

•

•

•

•

••

•••

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

••

•••

•

•

•

•

•

•

•

• •

•

•

•

• •

•

•

•

• •

•

•

•

• •

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

• •

•

•

•

•

• •

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

• •

•

•

•

•

• •

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

• •

•

•

•

•

• •

•

•

•

•

•

•

•

• •

•

•

•

• •

•

•

•

• •

•

•

•

• •

•

•

•

•

•

•

••

•

•

•

•

•

••

•••

•

•

•

•

•

•

•

•

•

• •

•

• •

••

•••

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

••

•

•

•

•

•

••

•

•

•

•

•

••

•••

•

•

•

•

•

•

•

•

•

•

•

•

••

•••

•

•

•

•

•

•

•

•

•

•

•

•

••

•

•

•

•

•

••

•••

•

•

•

•

•

•

•

•

•

•

•

•

••

•

•

•

•

•

••

•••

•

•

•

•

•

•

•

•

•

• •

•

• •

• • ••

•••

•

•

•

•

•

•

•

•

•••

•

•

•

•

•

•

•

•

•••

•

•

•

•

•

•

•

•

Couplings 32

Half-coupling bore sizes

Imperial cylindrical finish bore H7 Keyway to DIN 6885 sheet 1 (JS9)

01

21

31

40

51

60

80

90

Size Materials

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

11.11 3.18

12.7 3.18

13.45 3.18

15.87 4.76

15.87 3.97

17.46 4.76

19.02 3.17

19.05 4.76

19.05 6.35

22.22 4.76

22.22 6.35

22.22 4

25.4 6.35

25.4 4.76

26.94 4.76

28.58 6.35

01

21

31

40

51

60

80

90

Size Materials

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

AluminiumSteel

Cast IronAluminium

SteelCast Iron

31.75 6.35

31.75 7.94

34.94 7.94

38.1 9.52

41.27 9.52

41.6 12

44.45 11.11

47.63 12.7

50.8 12.7

53.94 12.7

60.33 15.88

60.33 12.7

73.03 19.05

85.73 22.23

92.07 22.22

28.58 7.94

Diameter / Key [mm]

Diameter / Key [mm]

SGEA-SGEG-SGES

•

•

•

•

•

•

•

•

•

•

•

•

•••

•

•

•

•

•

•

•

•

•

•

•

•

•

•••

•••

•

•

•

•

•

•

•••

••

•

••

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•••

•••

•

•

•

•

•

•

•••

•••

•

•

•

•

•

•

•••

•

•

•

•

•

•

•

•

•

•

•

•

•••

•••

•••

•

•

•

•

•

•

•• •• •

•

•

•

•

•

•

•

•

•

•

•

•

•

•••

•••

•

•

•

•

•

•

•••

•••

•

•

•

•

•

•

•••

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•••

••

•

•

Couplings33

SAE involute spline (angle 30°) - ANS.B.92.1.1970

Size Materials 916/32

1016/32

1116/32

1216/32

1316/32

1416/32

1516/32

2116/32

2316/32

2716/32

3316/32

4016/33

1412/24

1612/24

1712/24

138/16

01

21

31

40

60

80

90

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

Nr. of th - Diametral pitch

Size Materials 158/16

178/16

2024/48

2124/48

2324/48

2524/48

2624/48

2824/48

2924/48

3224/48

2340/80

3648/96

4148/96

4748/96

3332/64

01

21

31

40

60

80

90

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

Nr. of th - Diametral pitch

Half-coupling bore sizesSGEA-SGEG-SGES

• • • •• • • •

• •• •• •

• •

• • • •• • • •

• •• •• •

• •••

• • • • • •• • •

•

• • • •• • • •

• •• •• •

• ••• • •• •• • •• •

• •• •• • • •• • •

• •

• •• • • •

• •• •• •

• •••

• •• •• • • •• • •

• •

• • •

• •• •• •

• •••

• •• •• • • •• • •

• •

• • • •• • • •

• •• •• •

• ••

• • • •• • • •

• •• •• •

• •••

• • • • • •• • •

•

• • • •• • • •

• •• •• •

• ••• • •• •• • •• •

• •• •• • • •• • •

• •

• •• • • •

• •• •• •

• •••

• •• •• • • •• • •

• •

• • •

• •• •• •

• •••

• •• •• • • •• • •

• •

Couplings 34

Half-coupling bore sizes SGEA-SGEG-SGESSpline bores to DIN 5480

Size

Size

Materials

Materials

1318x1.25

2128x1.25

1420x1.25

2145x2

1430x2

2270x3

1432x2

2432x1.25

1635x2

2450x2

1737x2

2655x2

1825x1.25

2860x2

1838x2

2938x1.25

1840x2

3470x2

1842x2

3880x2

1860x3

01

21

31

40

60

80

90

01

21

31

40

60

80

90

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

Nr. of th - Size

Nr. of th - Size

• •

• • •• • •

•

• • •• • •

• • •

•

• • •• •• •• •

• •• •

•

•• •• •

•• •• • •• • •

• •

• • •• •• •• •

• • •• • ••

• •

• • •

••• • •• • •

•

• •

• • •• • •

•

• • •• • •

• • •

•

• • •• •• •• •

• •• •

•

•• •• •

•• •• • •• • •

• •

• • •• •• •• •

• • •• • ••

• •

• • •

••• • •• • •

•

Couplings35

Spline bores to DIN 5481

Size Materials 288x10

3010x12

3112x14

3215x17

3317x20

3421x24

3526x30

3638x34

4160x65

01

21

31

40

60

80

90

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

Nr. of th - Size

Spline bores to DIN 5482

Size Materials 9A17x14

8A15x12

10A18x15

12A20x17

13A22x19

14A25x22

15A28x25

16A30x27

17A32x28

18A35x31

19A38x34

20A40x36

21A42x38

23A48x44

22A45x41

24A50x45

01

21

31

40

60

80

90

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

Nr. of th - Size

Size Materials 25A52x47

26A55x50

27A58x53

28A60x55

29A62x57

30A65x60

31A68x62

32A70x64

33A72x66

34A75x69

35A78x72

36A80x74

37A82x76

38A85x79

39A88x82

01

21

31

40

60

80

90

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

SteelCast Iron

Nr. of th - Size

•

• • • • • •

• •• • •

•

•

••

•

• •• •

• • •• •

•

• • • • • •

• •• • •

• •• •• •• •• •• •• • •

• •• •• •• •• •• •• • •

• • •• • •

• • • • • •

•

• • •

•

• • •

•

• • • • • •

• •• • •

•

•

••

•

• •• •

• • •• •

•

• • • • • •

• •• • •

• •• •• •• •• •• •• • •

• •• •• •• •• •• •• • •

• • •• • •

• • • • • •

•

• • •

•

• • •

Half-coupling bore sizesSGEA-SGEG-SGES

Couplings 36

Couplings37

Couplings 38

Steel couplings

Couplings

SGDR series

Couplings39

SGDR

Technical data

Couplings: Steel C40Sleeve: Nylon PA66 Blue color

Gear couplings materials



Sleeve Nylon PA66: from -20 °C to +90 °CTemperature




Note

IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110

C40 Carbon SteelIEC Electric Motorssize

GENERAL INFORMATION

IEC Electric motors

Shaft DIN 5480

Shaft ISO 3019-2

Shaft DIN 5481

Shaft ANSI B92. 1A 1976

Shaft DIN 5482

Couplings 40

SGDRGENERAL INFORMATION


Pump half-coupling

Size

Configuration example: SGDRSGDR

4255

28

HALF-COUPLING FOR SPLINED SHAFT

Bore size code

Length

PD02

040 See page 42

See page 19

PD02 04028

Pump half-coupling

Size

Configuration example: SGDRSGDR

4255

28

BLANK HALF-COUPLING

Without borePB

PB28

Pump half-coupling Configuration example: SGDRSGDR

HALF-COUPLING FOR PARALLEL SHAFT

Bore size code

Double key way (available combinations only)

Length

G02

2E

040 See page 42

See page 18 (Parallel shaft - double key only)

See page 18

2EG02 04028

Size

4255

28

Couplings41

SGDRDimensions


Motor half-coupling

SGDR28M03040SGDR28M04040SGDR28M05040SGDR42M06042SGDR42M07042SGDR42M08042SGDR55M09060

0.50.50.51.01.01.02.5


8090

100-112132160180200

Motor size Shaft end [d x l] De L ø key Fg19x4024x5028x6038x80

42x11048x11055x110

45454560606084

40404042424260

19242838424855

M6M6M6M8M8M8M8

Dimensions [mm]

Dimensions [mm]

Half-coupling code

Pump half-couplings

SGDR28*** SGDR42*** SGDR55***

Complete the half-coupling designation with the pump interface code and the length.Example: SGDR280PD02050 (see page 19).

0.51.02.5

Weight [kg]De L456084

404260

Half-coupling code

Splined shaft ø

ø

key key

L

FG

key

De

Double key version

688

10121416

Couplings 42

SGDRDimensions

Sleeve

De E

B B

Half-coupling code

EGR066PAEGR090PAEGR125PA

SGDR28SGDR42SGDR55

0.0500.1500.371

Weight [kg]De E B6690

125

385265

162227

CodeDimensions [mm]

Couplings43

Bell-Housing are used as connecting elements between IEC motors and wide range of hydraulic pumps available on the international market.

Made in Aluminiun die cast, they cover a range from IEC motor size 63 to IEC motor size 355.

They are available in six different styles:- LMG series for gear pumps- LMC series monobloc bell-housing- LDC series made in 2 pcs fixed by screws- LMS series able to reduce the noise- LDS series made in 2 pcs fixed by screws- MULTI-COMPONENTS made by 3 pcs for IEC motors from sizes 132 up to size 225, made by 2 pcs for IEC motors from size 250 up to size 355

For the Bell-Housing selection you require please see our on-line software at www.mpfiltri.com.

Bell-Housing 44

Bell-Housing

LMG

LMC - LDC

LMS - LDS

MULTI-COMPONENTS

GENERAL INFORMATION

51

63

71

79

46page

Bell-Housing45

GENERAL INFORMATION NOISE

THEORY AND DEFINITION OF NOISE

From a health and hygiene standpoint, noise can be defi ned as an unpleasant and undesirable sound, or an unpleasant and annoying or intolerable auditory sensation (noise being any sound phenomena that may be accompanied by sensations of disturbance and pain). By definition, acoustic phenomena are oscillatory in character, propagated in a fl exible medium and causing pressure variations at the points, and the areas adjacent to those points, through which they pass.

2 THEORY AND DEFINITION OF NOISE1 SOUND

Technically considered, certain elements must be present simultaneously for acoustic phenomena to occur:

- Sound source

- Transmission medium

- Receive

The electric motor and the pump, together with the drive coupling, are the SOURCE OF THE NOISE. The Bell-housing is the noise transmission MEDIUM.Depending on whether the monobloc bell-housing is a rigid or low noise type, there will be variations in the fl exible properties of the transmission medium. The acoustic phenomena are dissimilar in the two cases, given the differences in pressure variation and particle displacement.

MOTOR AND PUMP UNIT

Noise is a particularly pervasive problem so much so that there have been statutory regulations in place now for some years, designed to limit harmful occupational exposure. Many of the machines used in industry today are equipped with oil-hydraulic systems, which happen to be a major source of noise.

RECEIVER- Human ear

- Sound level meter

BELL-HOUSING

ELECTRIC MOTOR

PUMP

Bell-Housing 46

ASSEMBLY OF MOTOR AND PUMP UNIT

Low noise bell-housing will help to attenuate the transmission of vibrations and the emission of noise generated by the system.Self-evidently, however, the mere adoption of a low noise bell-housing will achieve little unless the motor and pump are correctly installed on the machine or on the tank of the hydraulic power unit.

Should be followed in order to achieve best possible results and correct installation:

1 MOTOR AND PUMP UNIT MOUNTED HORIZONTALLY ON OIL TANK LID

- The suction pipe attached to the pump must be rigid and fi tted using a resilient bulkhead flange of the FTA series, which helps to cushion the vibrations propagated between the pipe and the tank lid. If pipes need to be bent, the radius of curvature must be at least 3 times the pipe diameter. Do not use elbow fi ttings, as these will signifi cantly increase pressure losses.

- The pressure pipeline of the pump must be flexible and long enough to include bends with the minimum radius of curvature recommended by the manufacturer for the specifi ed operating pressure.

- The return pipeline running from the service to the fi lter must be fl exible. Where oil is returned directly to the tank of the hydraulic power unit through a rigid pipe, it is advisable to use a resilient bulkhead fl ange of the FTR series, which helps to cushion the vibrations propagated between the pipe and the tank lid.

- Anti-vibration devices (resilient mounts or damping rods) must be located under the feet of the electric motor or the PDM foot brackets, depending on the mounting position of the motor.

- The lids of hydraulic oil tanks must be sturdy enough to support the load they carry.

2 MOTOR AND PUMP UNIT MOUNTED HORIZONTALLY ON MACHINE

- As a matter of good practice, the oil tank and motor-pump unit should be mounted on a single supporting frame of strength suffi cient to support the load.

- If the hydraulic system is fi tted with a side-mounted fi lter, the suction pipeline to the pump must be flexible and long enough to include bends with the minimum radius of curvature recommended by the manufacturer.

- If the suction filter is not side mounted, the pipeline should be rigid and installed in conjunction with a compensating coupling.

- The pressure pipeline of the pump must be fl exible, and long enough to include bends with the minimum radius of curvature recommended by the manufacturer for the specifi ed operating pressure.

- The return pipeline running from the service to the fi lter must be fl exible. Where oil is returned directly to the tank of the hydraulic power unit through a rigid pipe, it is advisable to use a resilient bulkhead fl ange of the FTR series, which helps to cushion the vibrations propagated between the pipe and the tank lid.

- Anti-vibration devices (resilient mounts or damping rods) must be located under the feet of the electric motor or the PDM foot brackets, depending on the mounting position of the motor.

FINAL CONSIDERATION

For best results, in any event, the motor-and-pump unit should be incorporated into the hydraulic system in such a way that no one component is rigidly associated with another, resulting in the propagation of vibration, and consequently noise.

RECOMMENDED TIGHTENING TORQUES FOR MOTOR/PUMP FIXING ON THE BELL-HOUSING

M6M8M10M12M14

M16M18M20M22M24

10 N∙m15 N∙m50 N∙m84 N∙m135 N∙m

205 N∙m280 N∙m400 N∙m530 N∙m690 N∙m

Note: The above guidelines are indicative only and subordinate to the solutions adopted ultimately by design engineers.

Bell-Housing47

PCD

40

45.2

50

50.85657.15

60

62.7

63

657071.875

80

82.55

85

90

92

72.0088.9071.8080.0093.0060.0063.0093.0082.5076.00

106.4074.0098.5075.00

157.20100.00125.00

85.0080.0080.00

100.0085.0090.0090.0084.0088.90

102.00100.00103.20100.00100.00110.00140.00115.00100.00106.40130.00100.00113.00

95.00103.00110.00106.40105.00106.40146.00110.00106.40112.00105.00118.00112.00140.00145.00

M8M8M8M8

M10M5ø7M8M8M6ø11M10M6M6

M12M8M6M8M8ø8,5M10M8M8M8ø7

M10M10M8M8ø11M10M10M10M10M10M10M8ø8,5M12M8M8

M10M10M10M8

M12M10M10M8M8ø9ø9M8

M10

244224422424444244242444444424222242444444242222242244

191096120052053280057287050234212098147227231042043044051058062168271073289047139024045059061063064065067083087093104169242272060097254260284066134156163164088089

D Nr. holes CodeSpigot hole[mm] Type

GENERAL INFORMATION

Bell-housing with nr. 2 holes at pump interface, aligned with through holes at motor interface.

Valid configuration for bell-housing up to ø400

Valid configuration for bell-housingfrom ø450 to ø660

Bell-housing with nr. 4 holes at pump interface, aligned with thread holes at motor interface.

Bell-housing with nr. 2 holes at pump interface + 22.5° compared to through holes at motor interface.

Bell-housing with nr. 4 holes at pump interface + 22.5° compared to thread holes at motor interface.

“-”: configuration out of ISO & SAE Standard

Spi

got

hole

Spi

got

hole

Spi

got

hole

Spi

got

hole

PC

DP

CD

PC

DP

CD

PUMP INTERFACE CODES

---

ISO3019-2-50-B2----

SAE A-A 50-2------

ISO3019-2-63-B2-----

ISO3019-2-63-B4-----

ISO3019-2-80-B4ISO3019-2-80-B2

-------------

SAE A 82-2-----------

Bell-Housing 48

PCD

95

98.4

100

101.6

105

110

112

115116

120

125

127

130

115.00127.00125.00125.00125.00125.00125.00190.00125.00125.00140.00146.00126.00120.00160.00150.00161.50146.00127.00146.00127.00146.00175.00130.00200.00135.00145.00140.00140.00130.00180.00160.00210.00145.00150.00160.00160.00160.00180.00155.00160.00200.00181.20200.00180.00170.00161.50181.20161.50165.00150.00181.20165.00165.00

M8M10ø11M10M10ø11M5ø15ø13M12M12M12M10M8

M10M10M12M12M12M10M10M12M10M8

M10M10M12M12M10M10M12M14M16M10ø13M12ø13M12M16M10ø17M12M16M16ø20ø18M12M16M14ø11M12M16M12M14

444244444222244442424244444224422444422444244442444244

137131128023025031032038041071072075106122141150029070125159224076110154202219273074138264198084094155267026033079082102113114136200215237021080140054068085124135

D Nr. holes CodeSpigot hole[mm] Type TypePCD

130

135

140

150

152.4

160

162

165.1

175

177.8

180

200

203.2205

224

250

275

165.00160.00175.40180.00180.00165.00200.00165.00180.00185.00228.60228.60228.60217.50228.60228.60190.50200.00200.00200.00224.00200.00230.00185.00224.00230.00188.00317.35317.35229.00317.35200.00230.00350.00216.00350.00216.00216.00224.00216.00215.00230.00250.00250.00280.00230.50254.00240.00280.00280.00310.00315.00355.00355.00

M10M10M12M14M12M10M16ø11M16M16M16M18M18ø17M20M20M8

M16ø17M16M20M12M22M12M16ø22M12M20M24M20M18M12M18M24M12M24ø13M16M16M12M22M22M20ø22M24M12M14M16M20ø22M24M20M16ø18

444424442442442444422244444424442442444444442444444444

253151220077081157176223232069022090108118166192207027035091092107111152184228263143145201204153185146222203055078112132148226028095117214210133144205238282233281

D Nr. holes CodeSpigot hole[mm]

GENERAL INFORMATION

“-”: configuration out of ISO & SAE Standard “-”: configuration out of ISO & SAE Standard

PUMP INTERFACE CODES

---

ISO3019-2-100-B4ISO3019-2-100-B2

------------

SAE B 101-2-----------------

ISO3019-2-125-B4--

ISO3019-2-125-B2--------

SAE C 127-2------

---

ISO3019-2-140-B4--

ISO3019-2-140-B2-------

SAE D 152-2SAE D 152 -4

-ISO3019 - 2 -160 B4

--

ISO3019 - 2 -160 B2------

SAE E 165 - 4SAE E 165 - 2

----

SAE F 177 - 4-

SAE F 177 - 2--

ISO3019 - 2 -180 B4---

ISO3019 - 2 -200 B4-----

ISO3019 - 2 -224 B4--

ISO3019 - 2 -250 B4--

Bell-Housing49

Bell-Housing 50

IEC electric motor range from size 63 up to size 225

Bell-Housing

LMG series

Bell-Housing51

Technical data

- Bell-housing: Pressure die casting Aluminium- Center ring: Galvanized Steel- Gasket: Special paper - Guarnital

Materials

Modular bell-housing components compatible for use with: - Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version

Compatibility with fl uids

From -30 °C to +80 °CTemperature


Bell-Housing - IEC electric motor range from size 63 up to size 225

LMG

IEC 63 ø 140 - ø 11x23IEC 71 ø 160 - ø 14x30IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 110 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140

LMG140LMG160LMG200LMG200LMG250LMG250LMG300LMG351LMG351LMG400LMG450

3Bell-Housing

size 0.5 1 2European standard size

3.5 4IEC Motors

sizeGerman standard sizeZB ZF ZG

GENERAL INFORMATION

Note: For specifi c information see pages 58 ÷ 60 “Table of Combination”

IEC Electric motors



Note

Bell-Housing 52

LMG

Without centre ring allowing removal of half-coupling (which as a rule is keyed permanently to the pump shaft); motor mounting flange drilled with 4 clearance holes + 4 threaded holes.Used normally for vertically mounted motor and pump units with pump submerged in the oil tank.

With centre ring allowing removal of half-coupling (which as a rule is keyed permanently to the pump shaft), motor mounting flange drilled with 4 clearance holes + 4 threaded holes. Normally used for motor and pump units mounted horizontally on the tank lid or on the machine for maximum ease of maintenance. With this type of mounting, in effect, the hydraulic pump can be removed without removing the motor. The half-coupling mounted to the shaft passes through the spigot hole.

Without centre ring allowing removal of half-coupling (which as a rule is keyed permanently to the pump shaft), motor mounting flange drilled with 8 clearance holes. Used normally for vertically mounted motor and pump units with pump submerged in the oil tank, allows greater flexibility for directional positioning of the hydraulic pump inside the tank, according to constructional requirements.

With centre ring allowing removal of half-coupling (which as a rule is keyed permanently to the pump shaft), motor mounting flange drilled with 8 clearance holes.Normally used for motor and pump units mounted horizontally on the tank lid or on the machine, offers maximum ease of maintenance and enables directional positioning of the pump. With this type of mounting, in effect, the hydraulic pump can be removed without removing the motor.The half-coupling mounted to the shaft passes through the spigot hole.

VERSIONS

LMG *** 4S LMG *** 4E

LMG *** 8S LMG *** 8E

Bell-Housing53


BELL-HOUSING LMG

Bell-Housing series and size

Product revision code

LMG140 LMG250Configuration example:

LMG251LMG141

LMG140 M 4EFS200 DI

M

Pump flange identification codeFS200 See page 55

Versions4S

8S4E

8E

4 through holes + 4 threaded holes, motor interface without coupling removal ring

8 through holes, motor interface without coupling removal ring4 through holes + 4 threaded holes, motor interface with coupling removal ring

8 through holes, motor interface with coupling removal ring

LMG300LMG160LMG350LMG161LMG351LMG200LMG400LMG201

LMG660

OptionsDI

SAAN

Pxx

Drain hole + inspection hole

Motor interface with clearance holesBlack anodized finish

Customer specification

Note:- Bell-Housings with DI options are supplied complete with threaded closure plug.- Bell-Housing with 4E/8E version are supplied with center ring mounted.- For product range codes see pages 58 ÷ 60

COMPLETE KIT (BELL-HOUSING & COUPLINGS)

Motors identification code

Size Size

Configuration example: AKA02 FS200 4EZ

Pump flange identification codeFS200 See page 55

Product revision codeZ

COUPLING KIT

Motors identification code

02 13


4303

AKG02 FS200 Z

Pumps flange identification codeFS200 See page 55

44044505460748

180 B3-B563 B1471 B1480 B1490 B14100/112 B1411

12

63 B3-B571 B3-B5 80 B3-B5 90 B3-B5 100/112 B3-B5 132 B3-B5 160 B3-B5

Product revision codeZ

LMG

Size Size Size02 63 B3-B5 13

1603 71 B3-B5 1804 80 B3-B5 2005 90 B3-B5 2207 100/112 B3-B5 2611 132 B3-B5

12 160 B3-B5 43

180 B3-B5200 B3-B5225 B3-B5250 B3-B5280 B3-B5315 B3-B563 B14

44454648

71 B1480 B1490 B14100/112 B14

Versions4S

8S4E

8E

4 through holes + 4 threaded holes, motor interface without coupling removal ring

8 through holes, motor interface without coupling removal ring4 through holes + 4 threaded holes, motor interface with coupling removal ring

8 through holes, motor interface with coupling removal ring

LMG450LMG550

Bell-Housing 54

LMG

M6M6M6M6M6M8M8M10M10M10M12M10M12M12M8M8M10

FS05MFS05CFS100FS1M0FS1M0FS200FS25TFS300FS3M0FS3T0FS35MFS350FS4M0FS400FSZBRFSZFRFSZGR

22.022.025.430.030.036.550.850.850.850.860.060.363.563.532.080.0

105.0

Hole

05

1

2

3

3.5

4

Bosch

Pumpgroup

Spigothole

25.525.526.224.524.532.543.042.043.045.048.549.565.064.310.334.548.0

A66.066.072.073.073.096.0

128.0128.0128.0137.0148.0149.5196.0188.0

40.0100.0145.0

B--

52.056.056.071.598.598.598.598.5

127.0114.3142.8143.0

40.072.0

102.0

CPump flange

codeShafttype

parallelparalleltapered 1:8paralleltapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:8tapered 1:5tapered 1:5tapered 1:5

6.07.09.7

12.013.917.222.222.222.222.225.625.633.333.3

9.816.925.2

2.02.02.43.03.0

3.2 - 44.04.04.04.0

4.76 - 5.04.76 - 5.06.35 - 7.06.35 - 7.0

2.03.05.0

Key Pump half-couplingcode

FS05MFS05CFS100FS1C0FS1M0FS200FS300FS300FS300FS300FS350FS350FS400FS400FSZBRFSZFRFSZGR

Key

d

Spigot hole Hole

dDimensions

Dimensions

Designation of pump flange and shaft

Bell-Housing55

LMG090LMG105LMG120LMG140LMG141LMG160LMG161LMG200LMG201LMG250LMG251 (*)

0.300.350.400.350.400.440.500.680.801.161.80

D1Weight

[kg]IEC - Electric motors

63 - B1471 - B1480 - B14

63 - B3/B563 - B3/B571 - B3/B571 - B3/B580 - B3/B590 - B3/B5

100-112 - B3/B5100-112 - B3/B5

Motor size Shaft end [d x l]11x2314x3019x4011x2311x2314x3014x3019x4024x5028x6028x60

Dimensions [mm]Bell-housing code

1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 3/4”

6070809595

110110130130180180

7585

100115115130130165165215215

90105120140140160160200200250250

637484

100100110110135135185185

789

1313151518182222

---M8M8M8M8M10M10M12M12

6779 999

11111414

4040454050405045507070

D2 D3 D4 H1 H2 F P H3 D6On request

606787609570

1058795

105126

LMG

Inspection HolePlastic threaded plug mounted

(protection accordingto DIN EN 292 part 2)“Safety of machines”

Nr.4xP

Nr.4xFDrain Hole(on request)

Motorsize

Motorsize

Pumpsize

Pumpsize

(*) Shape valid for LMG 251

Dimensions

Bell-housing

0.15

Bell-Housing 56

LMG300LMG351LMG351

2.554.904.90

D1Weight


132160180

Motor size Shaft end [d x l]38x80

42x11048x110


1”1”1”

230250250

265300300

300350350

235255255

233131

M12M16M16

141818

80100100

D2 D3 D4 H1 H2 F P H3 D6On request

145179179

LMG

Nr.4xP

Nr.4xFDrain Hole(on request)



ø10

Dimensions

Bell-housing

Bell-Housing57

LMGIEC Motors B3/5 - standard gear pumpIEC - Electric motors

Motor size

Shaft end [d x l]

Pump identification

code Bell-Housing code

Motor half-couplingcode

Spider code

Pump half-couplingcode

Complete coupling kit code

Components

FS05MFS05CFS100FS1C0FS1M0FSZBRFS05MFS05CFS100FS1C0FS1M0FSZBRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFRFS100FS1C0FS1M0FSZBRFS200FSZFRFS25TFS300FS3M0FS3T0FS100FS1C0FS1M0FSZGRFS200FSZFRFS25TFS300FS3M0FS3T0FS35MFS350

63

71

80

90

100112

132

11x23

14x30

19x40

24x50

28x60

38x80

LMG140MFS05M4SLMG140MFS05M4SLMG140MFS1004S/4ELMG140MFS1M04S/4ELMG140MFS1M04S/4ELMG140MFSZBR4SLMG160MFS05M4SLMG160MFS05M4SLMG160MFS1004S/4ELMG160MFS1M04S/4ELMG160MFS1M04S/4ELMG160MFSZBR4SLMG200MFS05M4SLMG200MFS05M4SLMG200MFS1004S/4ELMG200MFS1M04S/4ELMG200MFS1M04S/4ELMG200MFSZBR4SLMG201MFS2004S/4ELMG201MFSZFR4SLMG200MFS05M4SLMG200MFS05M4SLMG200MFS1004S/4ELMG200MFS1M04S/4ELMG200MFS1M04S/4ELMG200MFSZBR4SLMG201MFS2004S/4ELMG201MFSZFR4SLMG250MFS1004SLMG250MFS1M04SLMG250MFS1M04SLMG250MFSZBR4SLMG250MFS2004S/4ELMG250MFSZFR4SLMG251MFS25T4ELMG251MFS3004ELMG251MFS3M04ELMG251MFS3T04ELMG300MFS1004SLMG300MFS1M04SLMG300MFS1M04SLMG300MFSZGR4SLMG300MFS2004S/4ELMG300MFSZFR4SLMG300MFS25T4S/4ELMG300MFS3004S/4ELMG300MFS3M04S/4ELMG300MFS3T04S/4ELMG300MFS35M4S/4ELMG300MFS3504S/4E

SGEA01M01019FG

SGEA01M02028FG

SGEA01M03048FG

SGEA21M03048FG

SGEA01M04048FG

SGEA21M04048FG

SGEA21M05055FG

SGEA31M06077FG

EGE 0

EGE 0

EGE 0

EGE 2

EGE 0

EGE 2

EGE 2

EGE 3

SGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1COSGEA01FS1MOSGEA01FSZBRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA21FS200SGEA21FSZFRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA21FS200SGEA21FSZFRSGEA21FS100SGEA21FS1C0SGEA21FS1M0SGEA21FSZBRSGEA21FS200SGEA21FSZFRSGEA21FS300SGEA21FS300SGEA21FS300SGEA21FS300SGEA31FS100SGEA31FS1C0SGEA31FS1M0 SGEA31FSZGR SGEA31FS200 SGEA31FSZFR SGEA31FS300 SGEA31FS300 SGEA31FS300SGEA31FS300 SGEA31FS350 SGEA31FS350

Complete kit code

Note:- For bell-housing dimensions see pages 56-57.- For coupling dimensions see “Half-couplings” section on pages 26-27.

TABLE OF COMBINATION

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

AKG02FS05MZAKG02FS05CZAKG02FS100ZAKG02FS1C0ZAKG02FS1M0ZAKG02FSZBRZAKG03FS05MZAKG03FS05CZAKG03FS100ZAKG03FS1C0ZAKG03FS1M0ZAKG03FSZBRZAKG04FS05MZAKG04FS05CZAKG04FS100ZAKG04FS1C0ZAKG04FS1M0ZAKG04FSZBRZAKG04FS200ZAKG04FSZFRZAKG05FS05MZAKG05FS05CZAKG05FS100ZAKG05FS1C0ZAKG05FS1M0ZAKG05FSZBRZAKG05FS200ZAKG05FSZFRZAKG07FS100ZAKG07FS1C0ZAKG07FS1M0ZAKG07FSZBRZAKG07FS200ZAKG07FSZFRZAKG07FS300ZAKG07FS300ZAKG07FS300ZAKG07FS300ZAKG11FS100ZAKG11FS1C0ZAKG11FS1M0ZAKG11FSZGRZAKG11FS200ZAKG11FSZFRZAKG11FS300ZAKG11FS300ZAKG11FS300ZAKG11FS300ZAKG11FS350ZAKG11FS350Z

Bell-Housing 58


LMGIEC Motors B3/5 - standard gear pump

IEC - Electric motors Motor size

Shaft end [d x l]

Pump identification



Spider code


Components

FSZGRFS200FSZFRFS25TFS300FS3M0FS3T0FS35MFS350FSZGRFS200FSZFRFS25TFS300FS3M0FS3T0FS35MFS350FS200FS300FS3M0FS35MFS350FSZFRFSZGRFS300FS3MOFS35MFS350FSZGRFS300FS3MOFS35MFS350FSZGRFS300FS3MOFS35MFS350FSZGRFS300FS3MOFS35MFS350FSZGR

160

180

200

225

250

280

315

42x110

48x110

55x110

60x140

65x140

75x140

80x170

LMG351MFSZGR4SLMG351MFS2004SLMG351MFSZFR4SLMG351MFS25T4S/4ELMG351MFS3004S/4ELMG351MFS3M04S/4ELMG351MFS3T04S/4ELMG351MFS35M4S/4ELMG351MFS3504S/4ELMG351MFSZGR4SLMG351MFS2004SLMG351MFSZFR4SLMG351MFS25T4S/4ELMG351MFS3004S/4ELMG351MFS3M04S/4ELMG351MFS3T04S/4ELMG351MFS35M4S/4ELMG351MFS3504S/4ELMG400MFS2004ELMG400MFS3004ELMG400MFS3M04ELMG400MFS35M4ELMG400MFS3504ELMG400MFSZFR4SLMG400MFSZGR4SLMG450MFS3004ELMG450MFS3MO4ELMG450MFS35M4ELMG450MFS3504ELMG450MFSZGR4SLMG550MFS3004ELMG550MFS3MO4ELMG550MFS35M4ELMG550MFS3504ELMG550MFSZGR4SLMG550MFS3004ELMG550MFS3MO4ELMG550MFS35M4ELMG550MFS3504ELMG550MFSZGR4SLMG660MFS3004ELMG660MFS3MO4ELMG660MFS35M4ELMG660MFS3504ELMG660MFSZGR4S

SGEA51M07109FG

SGEA51M08109FG

SGEA51M09109FG

SGEG60M10110

SGEG60M11140

SGEG80M12140

SGEG80M13170

EGE 5

EGE 5

EGE 5

EGE 6

EGE 6

EGE 8

EGE 8

SGEA51FSZGRSGEA51FS200SGEA51FSZFRSGEA51FS300SGEA51FS300SGEA51FS300SGEA51FS300SGEA51FS350SGEA51FS350SGEA51FSZGRSGEA51FS200SGEA51FSZFRSGEA51FS300SGEA51FS300SGEA51FS300SGEA51FS300SGEA51FS350SGEA51FS350SGEA51FS200SGEA51FS300SGEA51FS300SGEA51FS350SGEA51FS350SGEA51FSZFRSGEA51FSZGRSGEG60FS300SGEG60FS300SGEG60FS350SGEG60FS350SGEG60FSZGRSGEG60FS300SGEG60FS300SGEG60FS350SGEG60FS350SGEG60FSZGRSGEG80FS300SGEG80FS300SGEG80FS350SGEG80FS350SGEG80FSZGRSGEG80FS300SGEG80FS300SGEG80FS350SGEG80FS350SGEG80FSZGR



Complete kit code

AKA12FSZGRZ4SAKA12FS200Z4SAKA12FSZFRZ4SAKA12FS25TZ4S/4EAKA12FS300Z4S/4EAKA12FS3M0Z4S/4EAKA12FS3T0Z4S/4EAKA12FS35MZ4S/4EAKA12FS3504ZS/4EAKA13FSZGRZ4SAKA13FS200Z4SAKA13FSZFRZ4SAKA13FS25TZ4S/4EAKA13FS300Z4S/4EAKA13FS3M0Z4S/4EAKA13FS3T04ZS/4EAKA13FS35MZ4S/4EAKA13FS350Z4S/4EAKA16FS200Z4SAKA16FS300Z4EAKA16FS3M0Z4EAKA16FS35MZ4EAKA16FS350Z4EAKA16FSZFRZ4EAKA16FSZGRZ4EAKA18FS300Z4EAKA18FS3M0Z4EAKA18FS35MZ4EAKA18FS350Z4EAKA18FSZGRZ4EAKA20FS300Z4EAKA20FS3M0Z4EAKA20FS35MZ4EAKA20FS350Z4EAKA20FSZGRZ4EAKA22FS300Z4EAKA22FS3M0Z4EAKA22FS35MZ4EAKA22FS350Z4EAKA22FSZGRZ4EAKA26FS300Z4EAKA26FS3M0Z4EAKA26FS35MZ4EAKA26FS350Z4EAKA26FSZGRZ4E

AKG12FSZGRZAKG12FS200ZAKG12FSZFRZAKG12FS300ZAKG12FS300ZAKG12FS300ZAKG12FS300ZAKG12FS350ZAKG12FS350ZAKG13FSZGRZAKG13FS200ZAKG13FSZFRZAKG13FS300ZAKG13FS300ZAKG13FS300ZAKG13FS300ZAKG13FS350ZAKG13FS350ZAKG16FS200ZAKG16FS300ZAKG16FS300ZAKG16FS350ZAKG16FS350ZAKG16FSZFRZAKG16FSZGRZAKG18FS300ZAKG18FS300ZAKG18FS350ZAKG18FS350ZAKG18FSZGRZAKG20FS300ZAKG20FS300ZAKG20FS350ZAKG20FS350ZAKG20FSZGRZAKG22FS300ZAKG22FS300ZAKG22FS350ZAKG22FS350ZAKG22FSZGRZAKG26FS300ZAKG26FS300ZAKG26FS350ZAKG26FS350ZAKG26FSZGRZ

Bell-Housing59

LMGIEC Electric motors B14 mountingIEC - Electric motors

Motor size

Shaft end [d x l]

Pump identification



Spider code


Components

FS05MFS05CFS100FS1C0FS1M0FSZBRFS05MFS05CFS100FS1C0FS1M0FSZBRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFRFS05MFS05CFS100FS1C0FS1M0FSZBRFS200FSZFR

63

71

80

90

100112

11x23

14x30

19x40

24x50

28x60

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

SGEA01M01019FG

SGEA01M02028FG

SGEA01M03048FG

SGEA21M03048FG

SGEA01M04048FG

SGEA21M04048FG

SGEA21M05055FG

EGE0

EGE 0

EGE 0

EGE 2

EGE 0

EGE 2

EGE 2

SGEA00FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA21FS200SGEA21FSZFRSGEA01FS05MSGEA01FS05CSGEA01FS100SGEA01FS1C0SGEA01FS1M0SGEA01FSZBRSGEA21FS200SGEA21FSZFRSGEA21FS05MSGEA21FS05CSGEA21FS100SGEA21FS1C0SGEA21FS1M0SGEA21FSZBRSGEA21FS200SGEA21FSZFR

AKG43FS05MZAKG43FS05CZAKG43FS100ZAKG43FS1C0ZAKG43FS1M0ZAKG43FSZBRZAKG44FS05MZAKG44FS05CZAKG44FS100ZAKG44FS1C0ZAKG44FS1M0ZAKG44FSZBRZAKG45FS05MZAKG45FS05CZAKG45FS100ZAKG45FS1C0ZAKG45FS1M0ZAKG45FSZBRZAKG45FS200ZAKG45FSZFRZAKG46FS05MZAKG46FS05CZAKG46FS100ZAKG46FS1C0ZAKG46FS1M0ZAKG46FSZBRZAKG46FS200ZAKG46FSZFRZAKG48FS05MZAKG48FS05CZAKG48FS100ZAKG48FS1C0ZAKG48FS1M0ZAKG48FSZBRZAKG48FS200ZAKG48FSZFRZ

AKA43FS05MZ4EAKA43FS05CZ4EAKA43FS100Z4EAKA43FS1C0Z4EAKA43FS1M0Z4EAKA43FSZBRZ4EAKA44FS05MZ4EAKA44FS05CZ4EAKA44FS100Z4EAKA44FS1C0Z4EAKA44FS1M0Z4EAKA44FSZBRZ4EAKA45FS05MZ4EAKA45FS05CZ4EAKA45FS100Z4EAKA45FS1C0Z4EAKA45FS1M0Z4EAKA45FSZBRZ4EAKA45FS200Z4EAKA45FSZFRZ4SAKA46FS05MZ4EAKA46FS05CZ4EAKA46FS100Z4EAKA46FS1C0Z4EAKA46FS1M0Z4EAKA46FSZBRZ4EAKA46FS200Z4EAKA46FSZFRZ4SAKA48FS05MZ4EAKA48FS05CZ4EAKA48FS100Z4EAKA48FS1C0Z4EAKA48FS1M0Z4EAKA48FSZBRZ4EAKA48FS200Z4EAKA48FSZFRZ4S




Complete kit code

Bell-Housing 60

LMGCENTER RING

GASKET

ANC01FS100ANC01FS1M0ANC02FS200ANC03FS200ANC03FS300ANC03FS350ANC04FS300ANC04FS350ANCA001ANCD005

D1Dimensions [mm]Center ring

code505072888888

115115

4285

25.430.036.536.550.860.350.860.322.050.8

1.01.02.02.02.52.53.53.51.02.5

D2 Thk.

Dimensions

Motor side gasket

LMG 120LMG 140LMG 160LMG 200LMG 250LMG 300LMG 350

D1Dimensions [mm]Bell-housing

size8496

110145190234260

100115130165215265300

120140160200250300350

1111111

D2 D3 Thk. Hole799

11141418

GUM P 120GUM P 140GUM P 160GUM P 200GUM P 250GUM P 300GUM P 350

Seals code

Pump side gasket

FS05MFS100FS1M0FS200FS300FSZBRFSZFR

PDDimensions [mm]Pump identification

code22.025.430.036.550.832.080.0

25.626.624.532.543.0

10.3534.5

66727396

12840

100

1111111

A B Thk. Hole6.56.56.58.5

10.58.59.0

GUP P001GUP P002GUP P003GUP P004GUP P005GUP P013GUP P014

Seals code

-52.456.071.598.540.072.0

808785

112148

75118

C H48676888

1186290

L

ANC01FS100ANC01FSM0ANC02FS200ANC03FS200ANC03FS300ANC03FS350ANC04FS200ANC04FS300ANC04FS350ANCA001ANCD005

LMG140Center ring

code LMG090 LMG105 LMG120Bell-Housing size

LMG160 LMG200 LMG250 LMG300 LMG350 LMG400 LMG450

Thk.

Thk.Thk. HoleHoleSpigothole

ACCESSORIES

Bell-Housing61

Bell-Housing 62

Bell-Housing

LMC/LDC seriesIEC electric motor range from size 80 up to size 355

Bell-Housing63

LMC/LDC

Technical data

- Monobloc bell-housing: Pressure die-cast aluminium alloy - Pump flange: Pressure die-cast aluminium alloy - Screws kit: Steel- Gaskets: Special paper (Guarnital) - Plug for inspection: Nylon

MaterialsFrom -30 °C to +80 °CTemperature


GENERAL INFORMATION



Special ApplicationsAny applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department


Note

Bell-Housing 64

LMC/LDC

IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170

LMC200LMC200LMC250LMC250LMC300LMC350LMC350LMC400LMC450LMC550LMC550LMC660

127-2(C)

Bell-Housing size 50-2

(A-A)82-2(A)

101-2(B)

Flange SAE J 744152-2

(D)165-2

(E)

IEC Motorssize101-4

(B)127-4

(D)152-4

(D)165-4

(E)

IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170

LMC200LMC200LMC250LMC250LMC300LMC350LMC350LMC400LMC450LMC550LMC550LMC660

100B2-B4

Bell-Housing size 50

B2-B463

B2-B480

B2-B4

Flange ISO 3019-2125

B2-B4160

B2-B4

IEC Motorssize200

B2-B4

GENERAL INFORMATION

Range

Bell-Housing65

Bell-Housing series and sizeLMC200AFSJLMC200AFSW

LMC350AFSY

Configuration example:LMC350AFSULMC400AFSVLMC450AFSZLMC550AFSNLMC550AFSOLMC660AFSPLMC660AFSS

LMC250AFSM

LMC200AFSJ DI

LMC300AFSTLMC300AFSX

LMC250AFSQLMC250AFSR

Options

FGDP

DI

AN

Holes rotated through 45° in relation to standard positionDouble set of hole


Black anodized finish

LMC

Pump interface codes070 See page 48

PxxSA

Customer specificationClearance holes at motor interface

070


LMC/LDC MONOBLOC BELL-HOUSING

Note:- Bell-housings with DI options are supplied complete with threaded closure plug.- For customization features other than those indicated on this page, contact MP Filtri Technical and Sales Department.

Bell-Housing series and sizeLDC200AFRBLDC200AFRCLDC200AFRD


LDC250AFRC

LDC200AFRB DI

LDC300AF5BLDC350AF6A

LDC300AFRCLDC300AF5A

LDC350AF6B

LDC400AF5BLDC400AF6A

LDC450AF6ALDC400AF6B

LDC450AF6B

LDC400AF5A

Options

FGDP

DI

AN




LDC


PxxSA


070

Bell-Housing 66

LMCMONOBLOC BELL-HOUSINGDimensions

LMC200AFSJ***LMC200AFSW***LMC250AFSM***LMC250AFSQ***LMC250AFSR***LMC300AFST***LMC300AFSX***LMC350AFSY***LMC350AFSU***LMC400AFSV***

0.750.951.501.601.753.203.304.804.906.50

D1Weight


8090

110 - 112

132

160180200

Motor size Shaft end [d x l]19x4024x50

28x60

38x80

42x11048x11055x110


3/4”3/4”3/4”3/4”3/4”3/4”3/4”1”1”

1 1/2”

130130180180180230230250250300

165165215215215265265300300350

200200250250250300300350350400

125125175175175230230240240280

100125114138159155170178194201

18181919192323313131

M10M10M12M12M12M12M12M16M16M16

608575

100120809595

115125

D2 D3 D4 D5 H1 H2 F H3 D6On request

135135186186186235235254254305

11111414141414181818

P Spigot hole

Minimum [mm]50505050508080508080

LMC450AFSZ*** LMC550AFSN***LMC550AFSO***LMC660AFSP***LMC660AFSS***

9.0015.0017.0027.0031.00

D1Weight


225250280

315

Motor size Shaft end [d x l]60x14065x14075x140

80x170


1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”

350450450550550

400500500600600

450550550660660

320----

250265310295 325

3131353545

M16 M16M16M16M20

175175175175175

D2 D3 D4 D5 H1 H2 F H3 D6On request

350----

-----

P Spigot hole

Minimum [mm]80

100100100100





Drain Hole(on request)

Nr.4xP Nr.4xF

Nr.8xFDrain Hole

(on request)

Motorsize

Motorsize

Pumpsize

Pumpsize

Spi

got

Hol

eS

pigo

tH

ole

ø10

ø10

Bell-Housing67

LDC200AFRB***LDC200AFRC***LDC200AFRD***LDC250AFRC***LDC300AFRC***LDC300AF5A***LDC300AF5B***LDC350AF6A***LDC350AF6B***LDC400AF5A***LDC400AF5B***LDC400AF6A***LDC400AF6B***

1.851.952.102.754.604.504.806.807.307.507.908.509.00

D1Weight


80

90

110 - 112

132

160180

200


24x50

28x60

38x80

42x11048x110

55x110


3/4”3/4”3/4”3/4”3/4”3/4”3/4”1”1”

1 1/2”1 1/2”1 1/2”1 1/2”

130130130180230230230250250300300300300

165165165215265265265300300350350350350

200200200250300300300350350400400400400

125133158169185190181239252246234246260

18181819232323313131313131

M10M10M10M12M12M12M12M16M16M16M16M16M16

606075

100959595

115115125125125125

D2 D3 D5 H1 H2 F H3 D6On request

135135135186235235235254254305305305305

11111114141414181818181818

P Spigot hole

Minimum [mm]50505050508080808080808080

LDCDimensions




Nr.4xP

Nr.4xF

Motorsize Pump

size

Spi

got

Hol

e

MONOBLOC BELL-HOUSING

ø10

Bell-Housing 68

LDC450AF6A***LDC450AF6B***

11.2011.60

Weight [kg]

IEC - Electric motors

225


60x140


Spigot holeMinimum [mm]

8080

D11 1/2”1 1/2”

350350

400400

450450

295308

3131

M16M16

175175

D2 D3 D5 H1 H2 F H3 D6On request

350350

--

P

LDC

LMC200A*** LMC200A*** LMC250A*** LMC300A*** LMC350A*** LMC400A*** LMC450A*** LMC550A*** LMC660A***

MP Filtri code KTR code OMT code Hydrapp code Raja code

PK200/3/... PL200/8/... PL250/6/... PL300/4/... PK350/4/... PK400/4/... PK450/4/... PK550/4/... PK660/4/...

TH20A*** TH1*** TH2*** TH3*** TH4*** TH15*** TH18*** TH19*** TH20***

- HLC1 HLC3 HLC5 HLC8 HLC12 - - -

R200/99-115/... R200/120-135/... R250/120-135/... R300/155-170/... R350/173-194/... R400/194-210/... R450/250-210/... R550/250-210/... R660/250-210/...

Comparative table

Dimensions




Nr.8xF

Motorsize Pump

size

Spi

got

Hol

e

MONOBLOC BELL-HOUSING

Note:The above table is gudeline only. Not all bell-housings are fully interchangeble.

ø10

22.5° 22.5°

Bell-Housing69

Bell-Housing 70

Bell-Housing

LMS/LDS seriesIEC electric motor range from size 100 up to size 315

Bell-Housing71

LMS/LDS

Technical data

- Motor base bell-housing: Pressure die-cast aluminium alloy - Pump fl ange: Pressure die-cast aluminium alloy - Internal ring: Pressure die-cast aluminium alloy - Damping ring: Vulcanized aluminium + NBR 75 Shore A

MaterialsFrom -30 °C to +80 °CTemperature


GENERAL INFORMATION


Compatibility with fl uids

Special Applications Any applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department


Note

Bell-Housing 72

LMS/LDS

IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170

LMS250LMS250LMS300LMS350LMS350LMS400LMS450LMS550LMS550LMS660

127-2(C)

Bell-Housing size 50-2

(A-A)82-2(A)

101-2(B)

Flange SAE J 744152-2

(D)165-2

(E)

IEC Motorssize101-4

(B)127-4

(D)152-4

(D)165-4

(E)

IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140IEC 250 ø 550 - ø 65x140IEC 280 ø 550 - ø 75x140IEC 315 ø 660 - ø 80x170

LMS250LMS250LMS300LMS350LMS350LMS400LMS450LMS550LMS550LMS660

100B2-B4

Bell-Housing size 50

B2-B463

B2-B480

B2-B4

Flange ISO 3019-2125

B2-B4160

B2-B4

IEC Motorssize200

B2-B4

GENERAL INFORMATION

Range

Bell-Housing73

LMS/LDSDesignation & Ordering code

Bell-Housing series and size Configuration example: LMS250AFSA DI

Options

FGDP

DI

AN




LMS

Pump interface codes070

PxxSA


070

Note:- Bell-housings with DI options are supplied complete with threaded closure plug.- For customization features other than those indicated on this page, contact MP Filtri Technical and Sales Department.

Bell-Housing series and size Configuration example: LDS250AFRA DI

Options

FGDP

DI

AN




LDS

Pump interface codes070

PxxSA


070

See page 48

See page 48

LDS250AFRALDS250AFBB

LDS400AF6A

LDS450AF6ALDS550AF6ALDS660AF6ALDS250AFRE

LDS300AF5GLDS350AF5A

LDS300AFRBLDS300AFRC

LMS250AFSALMS250AFSB

LMS350AFSH

LMS400AFSL

LMS450AFSO

LMS400AFSM

LMS550AFSP

LMS550AFSS

LMS400AFSN

LMS550AFSR

LMS660AFST

LMS300AFSC

LMS350AFSFLMS350AFSG

LMS300AFSDLMS300AFSE

Bell-Housing 74

LMSDimensionsDimensions

LMS250AFSA***LMS250AFSB***LMS300AFSC***LMS300AFSD***LMS300AFSE***LMS350AFSF***LMS350AFSG***LMS350AFSH***LMS400AFSL***LMS400AFSM***LMS400AFSN***

LMS450AFSO***LMS550AFSP***LMS550AFSR***LMS550AFSS***LMS660AFST***

3.724.104.204.456.516.807.108.518.809.10

11.61

12.115.215.919.220.2

D1

D1

Weight [kg]

Weight [kg]



225

250

280315

100 - 112

132

160

180

200

Motor size

Motor size

Shaft end [d x l]

Shaft end [d x l]60x140

65x140

75x14080x170

28x60

38x80

42x110

48x110

55x110

Dimensions [mm]

Dimensions [mm]

Bell-housing code

Bell-housing code

3/4”3/4”3/4”3/4”3/4”1”1”1”

1 1/2”1 1/2”1 1/2”

1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”

180180230230230250250250300300300

350450450450550

215215265265265300300300350350350

400500500500600

250250300300300350350350400400400

450550550550660

128148155168194204228204228256240

255255270290305

1919232323313131313131

3131313142

M12M12M12M12M12M16M16M16M16M16M16

M16M16M16M16M20

7575808080959595

125125125

175176177178179

D2

D2

D3

D3

H1

H1

H2

H2

F

F

H3

H3

D6

D6

On request

On request

1414141414181818181818

-----

P

P



5050508080808080808080

8080808080




Nr.4xP

Nr.4xF

Motorsize

Pumpsize

Spi

got

Hol

eInspection Hole

Plastic threaded plug mounted(protection accordingto DIN EN 292 part 2)“Safety of machines”


Nr.8xF

Motorsize

Pumpsize

Spi

got

Hol

e

ø10

ø10

Bell-Housing75

LDSDimensions

LDS250AFRA***LDS250AFRB***LDS250AFRE***LDS300AFRB***LDS300AFRC***LDS300AF5G***

LDS350AF5A***

LDS400AF6A***

3.974.104.704.754.856.70

8.10

10.00

D1Weight


100 - 112

132

160180

200


28x60

38x80

42x11048x110

55x110


3/4”3/4”3/4”3/4”3/4”3/4”

1”

1 1/2”

180180180230230230

250

300

215215215265265265

300

350

250250250300300300

350

400

158165173185188232

254

288

191919232323

31

31

M12M12M12M12M12M12

M16

M16

757575808080

95

125

D2 D3 H1 H2 F H3 D6On request

141414141414

18

18

P Spigot hole

Minimum [mm]505050508080

80

80

Dimensions




Nr.4xP

Nr.4xF

Motorsize

Pumpsize

Spi

got

Hol

e

ø10

Bell-Housing 76

LDS

LDS450AF6A***

LDS550AF6A***

LDS660AF6A***

14.10

17.20

23.00

D1Weight


225

250280

315


65x14075x140

80x170

DimensionsBell-housing code

1 1/2”

1 1/2”

1 1/2”

350

450

550

400

500

600

450

550

660

287

300

335

31

31

42

M16

M16

M20

175

176

179

D2 D3 H1 H2 F H3 D6On request

-

-

-

P Spigot hole

Minimum [mm]80

80

80

Dimensions




Nr.8xF

Motorsize Pump

size

Spi

got

Hol

e

LMS250A*** LMS300A*** LMS350A*** LMS400A*** LMS450A*** LMS550A*** LMS660A***

MP Filtri code KTR code OMT code Raja code

PK+D150/190PK+D150/190PK+D150/D190/D230/260PK+/D190/D230/260PK+/D190/D230/260D/D330PK+/D190/D230/260D/D330PK+/D190/D230/260D/D330

BS251***BS300***BS350***BS400***BS451***BS551***BS661***

R250***DFR300***DFR350***DFR400***DFR450***DFR550***DFR660***DF

Comparative table

Note:The above table is guideline only. Not all bell-housings are fully interchangeable.

ø10

Bell-Housing77

Bell-Housing 78

IEC electric motor range from size 132 up to size 355

Bell-Housing

MULTI-COMPONENTS

Bell-Housing79

MULTI-COMPONENTS

Technical data

- Base module: Pressure die-cast aluminium alloy- Pump flange: Aluminium alloy- Intermediate adapter: Aluminium alloy.- Screw kit: Steel- Gaskets: Special paper (Guarnital)

Materials

Modular Bell-Housing Components - IEC electric motor range from size 132 up to size 355


GENERAL INFORMATION



Special ApplicationsAny applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department


Note

Bell-Housing 80

MULTI-COMPONENTS

IEC 80 ø 200 - ø 19x40IEC 90 ø 200 - ø 24x50IEC 100 ø 250 - ø 28x60IEC 112 ø 250 - ø 28x60IEC 132 ø 300 - ø 38x80IEC 160 ø 350 - ø 42x110IEC 180 ø 350 - ø 48x110IEC 200 ø 400 - ø 55x110IEC 225 ø 450 - ø 60x140


BMC200BMC200BMC250BMC250BMC300BMC350BMC350BMC400BMC450

BMT300BMT350BMT350BMT400BMT450BMT550BMT550BMT660BAD800

127-2(C)

127-2(C)

Bell-Housing size

Bell-Housing size

50-2(A-A)

50-2(A-A)

82-2(A)

82-2(A)

101-2(B)

101-2(B)

Flange SAE J 744

Flange SAE J 744

152-2(D)

152-2(D)

165-2(E)

165-2(E)

IEC Motorssize

IEC Motorssize

101-4(B)

101-4(B)

127-4(D)

127-4(D)

152-4(D)

152-4(D)

165-4(E)

165-4(E)



BMC200BMC200BMC250BMC250BMC300BMC350BMC350BMC400BMC450

BMT300BMT350BMT350BMT400BMT450BMT550BMT550BMT660BAD800

100B2-B4

100B2-B4

Bell-Housing size

Bell-Housing size

50B2-B4

50B2-B4

63B2-B4

63B2-B4

80B2-B4

80B2-B4

Flange ISO 3019-2

Flange ISO 3019-2

125B2-B4

125B2-B4

160B2-B4

160B2-B4

IEC Motorssize

IEC Motorssize

200B2-B4

200B2-B4

GENERAL INFORMATION

BMC

BMT

Bell-Housing81


Motor base series and size

Intermediate adapter series and size

BMC200A1001

AD60465

BMT300A0805 BMT550A21567

BMT400A1106 BAD800A2707

BMC200A1251

AD50385

BMT350A1105 BMT660A25067

BMT450A1406



BMC300A1551 BMC400A2016BMC300A1555 BMC450A2507BMC300A1705BMC350A1945BMC350A1946

BMC250A1141

AD60466

AD50467

BMC200A1001

AD60465

DI

AN

BMC250A1361

AD50386

AD60467

Options

Options

DIAN

AN

Drain hole + inspection holeBlack anodized finish


BMC


Pxx

Pxx

SACustomer specification

Customer specification

Clearance holes at motor interface

Pump flange series and size

Mounting kit code series and size

FR1023

KVG1

FR1025

KVG5

Configuration example:FP5026 FP6032 FP7052FP5032 FP6045 FP7066FP5035 FP6058 FP7069

FP5063 FP6086

FP5045 FP6070 FP7086

FP60101

FP5056 FP6082 FP70111

FP5091FP60110

FR1033

FR1040

KVG6

FP5026 AN070

FR1035

FR1079

KVG7

Options

FGDP


PxxAN

Customer specificationBlack anodized finish

See page 99

Options

MULTI-COMPONENTS

1

2

3

Bell-Housing 82

BMC / FLANGE FR1




4 Bolt Version 2 Bolt Version

Nr.4xP

Nr.4xF

Nr.4xM8

Motorsize

BMC200A1001BMC200A1251BMC250A1141BMC250A1361BMC300A1551

FR1023***FR1025***FR1033***FR1035***FR1040***FR1079***

H1

H1

Motor base code D1

2 Bolt 4 Bolt

D2 D3 D5Dimensions [mm]

Mounting kit

Available pump interface

H2 F PWeight

[kg]

Weight [kg]

130130180180230

D042 - S061 - S063 -S083 - S023 - S070 -S071 - S082 - S075S080 - S082 S023 - S070 - S071 - S072 -S074 S080 -S082S060 - S063 -S065--

S024 - S025 - S125 - S154S021 - S026 - S068 -S069S021 - S026 - S027-S098 - S227S031

165165215215265

200200250250300

135135186186235

100125114138155

232533354079

KVG1

1818191923

M10M10M12M12M12

1111141414

0.750.951.601.603.30

0.250.300.800.901.101.30

8090

100-112

132

19x4024x50

28x60

38x80


Pump flangecode

Motor size Shaft end [d x l]On request

See page 99

H3 D6607580

10095

3/4”3/4”3/4”3/4”3/4”

Pump flange code to be complete with available pump interfaceExample: FR1023S024

ø10

ø85

ø105

ø105 ø105

ø85

MULTI-COMPONENTS2

1

3

Bell-Housing83





Nr.4xP

Nr.4xF

Nr.4xM14

Motorsize

BMC300A1555BMC300A1705BMC350A1785BMC350A1945

FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***

H1

H1

Motor base code D1

2 Bolt 4 Bolt


Mounting kit


H2 PFWeight

[kg]

Weight [kg]

230230250250

S023 - D042 - S063 - S070 - S072 S075 -S023 - D042 - S063 - S070 - S072 - S075 - S060 - S072 - S074 - S075 - S106S060 - S070 - S071 - S072 - S074 - S075 - S106S072S070 - S079 - S138-

S024 - S024 -S033 - S125 - S154S024 - S031 - S096 - S125S021 - S024 - S025 - S026 - S031 - S059 - S068 - S083 - S097 - S125 - S141S021 - S024 - S025 - S026 - S068 - S125 -S141S021 - S026 S021 - S025 - S068 -S141S025 - S031 - S033 - S113 - S267

265265300300

300300350350

235235254254

155170178194

26323545566391

KVG5

23233131

14141818

M12M12M16M16

3.33.64.44.9

1.01.10.90.91.61.72.2

132

160180

38x80

42x11048x110


Pump flangecode


See page 99

H3 D695

110100115

3/4”3/4”1”1”

Pump flange code to be complete with available pump interfaceExample: FP5026S023

BMC / FLANGE FP5

ø170ø170ø1

90

ø190

ø170

ø10

MULTI-COMPONENTS 2

1

3

Bell-Housing 84





Nr.4xP

Nr.4xF

Nr.4xM14

Motorsize

BMC350A1786BMC350A1946BMC400A2016

FP6032***FP6045***FP6058***FP6070***FP6082***FP6086***FP6101***FP6110***

H1

H1

Motor base code D1

2 Bolt 4 Bolt


Mounting kit


H2 PFWeight

[kg]

Weight [kg]

250250300

S081 - S082S070 - S075 - S080 - S081 - S082S079 - S080 - S081 - S082S080 S080 - S081 S090 - S092 - S166 - S091 -S080

S021 - S035 S021 -S025 - S026 -S027 - S069 - S077 -S125 - S198 - S207 - S215 - S253S024 -S025 - S026 -S027 - S038 - S077 - S078 - S207 - S215 - S237-S038 - S141 - 198 - 215S021 - S026 - S027 - S077 - S078 - S114 - S132 - 198 - S200S027 - S035 - S113 -S132 - S148 - S176 - S228S111

300300350

350350400

254254305

178194201

324558708286

101110

KVG6

313131

181818

M16M16M16

4.41.96.9

1.82.12.43.03.33.44.25.5

160180200

42x11048x11055x110


Pump flangecode


See page 99

H3 D6100115125

1”1”

1 1/2”


BMC / FLANGE FP6

ø218

ø218 ø218

ø240

ø240

ø10

MULTI-COMPONENTS2

1

3

Bell-Housing85





Nr.8xF

Nr.4xM14

Motorsize

BMC450A2506


H1

H1

Motor base code D1

2 Bolt 4 Bolt


Mounting kit


H2 PFWeight

[kg]

Weight [kg]

350



400 450 350 250

324558708286

101110

31 -M16 6.9

1.82.12.43.03.33.44.25.5

225 60x140


Pump flangecode


H3 D6

175 1 1/2”


BMC / FLANGE FP6

KVG6See page

99

ø240

ø240

ø218

ø10

ø218ø218

MULTI-COMPONENTS 2

1

3

Bell-Housing 86





Nr.8xF

Nr.4xM20

Motorsize

BMC450A2507

FP7052***FP7066***FP7069***FP7086***FP7111***

H1

H1

Motor base code D1

2 Bolt 4 Bolt


Mounting kit


H2 PFWeight

[kg]

Weight [kg]

350

-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145

S028 - S108 - S112 - S133 - S192-S108 - S143 - S148 - S192 - S201 - S204 - S281 -S282S022 - S027 - S028 - S108 - S112 - S184 - S192 - S201 - S228 - S300S028 - S108 - S112 - S133 - S184

400 450 350 250

52666986

111

31 -M16 6.9

4.44.84.95.26.3

225 60x140


Pump flangecode


H3 D6

175 1 1/2”


BMC / FLANGE FP7

KVG7See page

99

ø10

ø288

ø258

ø258 ø258

ø288

MULTI-COMPONENTS2

1

3

Bell-Housing87

BMT300

Flange


(protection according to DIN EN 292 part 2)“Safety of machines”



Nr.4xM12

Nr.4xø14

Nr.4xP Nr.4xP

Nr.8xø15

Motorsize

Motor baseinterface

Pump flangeinterface

FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***


FP7052***FP7066***FP7069***FP7086***FP7111***

H1 D1 D2 P 2 Bolt 4 BoltMounting

kitAvailable pump interface Weight

[kg]S023 - D042 - S063 - S070 - S072 S075 -S023 - D042 - S063 - S070 - S072 - S075 - S060 - S072 - S074 - S075 - S106S060 - S070 - S071 - S072 - S074 - S075 - S106S072S070 - S079 - S138-


-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145




170 15

324558708286

101110

190

17

52666986

111

288 258 22

KVG5

KVG6

KVG7

BMT300A0805

Motor base code

Weight[kg]

1.95

11.10.90.91.61.72.2

1.82.12.43.03.33.44.25.5

4.44.84.95.26.3

Pump flangecode

See page 99

See page 99

See page 99


ø10

ø190

ø234

ø300

ø265

ø230

ø166

218240

1

3

MULTI-COMPONENTS 3

26323545566391

Bell-Housing 88

BMT300

Flange interface Motor base interface

AD50385Code Weight [kg]

1.00


1.25


1.90

Nr.4xM14

Nr.4xM16

Nr.4xM20

Nr.4xM14

Nr.4xM14

Nr.4xM14

ø170

ø218

ø258

ø166

ø166

ø166

ø190

ø240

ø190

ø190

ø190

ø288

2

MULTI-COMPONENTS 3

Bell-Housing89

BMT350



Drain Hole(on request) Nr.4xM16

Nr.4xø18

Nr.8xø15

Motorsize

Motor baseinterface

FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***


FP7052***FP7066***FP7069***FP7086***FP7111***





-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145




15

324558708286

101110

17

52666986

111

288 258 22

11.10.90.91.61.72.2

1.82.12.43.03.33.44.25.5

4.44.84.95.26.3

Pump flangecode


Flange


Nr.4xP Nr.4xP


BMT350A1105

Motor base code

Weight [kg]

3.10

KVG5

KVG6

KVG7

See page 99

See page 99

See page 99

ø10

ø190

ø260

ø166

ø350

ø300

ø250

170190

218240

MULTI-COMPONENTS 3

1

3

26323545566391

Bell-Housing 90

BMT350



1.00


1.25


1.90

Nr.4xM14

Nr.4xM16

Nr.4xM20

Nr.4xM14

Nr.4xM14

Nr.4xM14

ø170 ø166

ø190

ø190

ø218 ø166

ø240

ø190

ø258 ø166

ø190

ø288

MULTI-COMPONENTS 3

2

Bell-Housing91

BMT400




Nr.4xø18

Nr.8xø15

Motorsize

Motor baseinterface

FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***


FP7052***FP7066***FP7069***FP7086***FP7111***





-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145




15

324558708286

101110

17

52666986

111

288 258 22

11.10.90.91.61.72.2

1.82.12.43.03.33.44.25.5

4.44.84.95.26.3

Pump flangecode


Flange


Nr.4xP Nr.4xP


BMT400A1106

Motor base code

Weight [kg]

4.90

KVG5

KVG6

KVG7

See page 99

See page 99

See page 99

ø10

ø240

ø300

ø208

ø400

ø350

ø300

1 1/2”

170190

218240

1

3

MULTI-COMPONENTS 3

26323545566391

Bell-Housing 92

BMT400



1.30


1.60


2.50

Nr.4xM14

Nr.4xM16

Nr.4xM20

Nr.4xM16

Nr.4xM16

Nr.4xM16

ø170

ø218

ø258

ø208

ø208

ø208

ø190

ø240

ø288

ø240

ø240

ø240

2

MULTI-COMPONENTS 3

Bell-Housing93

BMT450




Nr.8xø17.5

Motorsize

FP5026***FP5032***FP5035***FP5045***FP5056***FP5063***FP5091***


FP7052***FP7066***FP7069***FP7086***FP7111***





-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145




15

324558708286

101110

17

52666986

111

288 258 22

1.01.10.90.91.61.72.2

1.82.12.43.03.33.44.25.5

4.44.84.95.26.3

Pump flangecode


Flange


Nr.4xP Nr.4xP


BMT450A1406

Motor base code

Weight [kg]

5.00

KVG5

KVG6

KVG7

See page 99

See page 99

See page 99

ø10

ø240

ø350

1 1/4”

ø208

ø450

ø400

ø350

170190

218240

1

3

MULTI-COMPONENTS 3

26323545566391

Bell-Housing 94

BMT450



1.30


1.60


2.50

Nr.4xM14

Nr.4xM16

Nr.4xM20

Nr.4xM16

Nr.4xM16

Nr.4xM16

ø170ø208

ø190

ø240

ø218 ø208

ø240

ø240

ø258 ø208

ø288

ø240

2

MULTI-COMPONENTS 3

Bell-Housing95

BMT550




Nr.4xM20

Nr.4xM16

Nr.16xM16

Motorsize


FP7052***FP7066***FP7069***FP7086***FP7111***



[kg]


-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145



324558708286

101110

17

52666986

111

288 258 22

1.82.12.43.03.33.44.25.5

4.44.84.95.26.3

Pump flangecode


Flange


Nr.4xP Nr.4xP


BMT550A21567

Motor base code

Weight [kg]

8.80

KVG6

KVG7

See page 99

See page 99

ø258

ø218

ø550

ø500

ø450

ø240

ø288

ø450

ø10

218240

1

3

MULTI-COMPONENTS 2

1 1/2”

Bell-Housing 96

BMT660




Nr.4xM20

Nr.4xM16

Nr.16xM20

Motorsize


FP7052***FP7066***FP7069***FP7086***FP7111***



[kg]


-S090 - S092 - S166-S091 - S092 - S117 - S166 S091 - S092 - S117 - S145



324558708286

101110

17

52666986

111

288 258 22

1.82.12.43.03.33.44.25.5

4.44.84.95.26.3

Pump flangecode


Flange


Nr.4xP Nr.4xP


BMT660A25067

Motor base code

Weight [kg]

12.00

KVG6

KVG7

See page 99

See page 99

ø258

ø218

ø660

ø600

ø550

ø240

ø288

ø10

ø550

218240

1

3

MULTI-COMPONENTS 2

1 1/2”

Bell-Housing97




Nr.4xM20

Nr.16xM20

Motorsize

FP7052***FP7066***FP7069***FP7086***FP7111***



[kg]-S090 - S092 - S166-S091 - S092 - S117 - S166 - S091 - S092 - S117 - S145


52666986

111

288 258 22

4.44.84.95.26.3

Pump flangecode


Flange


Nr.4xø22 Nr.4xø22


BAD800A2707

Motor base code

Weight [kg]

31.00

KVG7See page

99

ø258

ø800

ø740

ø680

ø288

ø680

ø10

ø258 ø258

ø288

1

3

BAD800MULTI-COMPONENTS 2

1 1/2”

Bell-Housing 98

MOUNTING KIT

ø85.5ø105

ø132ø170

ø189.5

ø180ø218

ø239

ø205ø258ø287

KVG1

KVG5

KVG6

KVG7

Q.ty

Q.ty

Q.ty

Q.ty

Material

Material

Material

Material

Torque

Torque

Torque

Torque

144

144

144

14

PaperSteelSteel

PaperSteelSteel

PaperSteelSteel

PaperSteel

-200 Nm

-

-130 Nm

-

-90 Nm

-

-15 Nm

Item

Item

Item

Item

Description

Description

Description

Description

Components

Components

Components

Components

123

123

123

12

1

1

1

1

2

2

2

2

3

3

3

Gasket for auxiliary flange FP7 / AD7Screw T.C.E.I. M20x50 UNI-5931 8.8Washer Schnorr 20



Gasket for auxiliary flange FR1Screw T.C.E.I. M8x20 UNI-5931 8.8

MULTI-COMPONENTS

Bell-Housing99

The range of products is completed by a number of accessories, including:

DAMPING RINGS, intended mainly for use with motor-pump units positioned vertically and with the pump submerged in the oil tank.

FOOT BRACKETS, which serve to support the motor pump unit in the event that the selected electric motor does not have mounting feet.

DAMPING RODS, to be mounted under the electric motor feet or under the foot brackets.

CLEANING COVERS, facilitating the maintenance of oil tanks in hydraulic power units, without necessarily having to dismantle the unit.

ALUMINIUM TANKS of 10 litres capacity, allowing the assembly of a compact hydraulic power unit.

Accessories 100

Accessories

Damping rings

Foot brackets

Damping rods

Cleaning covers

Aluminium tanks

102

104

105

106

111

pageANM A

PDM A

MPDR PDMA - MPDR

OB

SE10

Accessories101

ACCESSORIES DAMPING RINGS

Positioned between the bell-housing motor flange and lid of the tank, they help to reduce the transmission of the vibrations and emission of noise generated by the system.

Damping rings provide a perfect hydraulic sealing actions by virtue of their special profile; damping rings are available for IEC electric motors from size 80 to size 315.

In order to warranty the application, to proceed with the calculation of the max weight and moment with the following formulas.

Values higher than those in the table could damage the product and couldn’t warranty the conformity of the application!

Permissible radial weight and bending load for damping rings

Example of assembly


Special Applications- Mineral oils types HH-LL-HM-HR-HV-HC, to ISO 6743/4 standard- Water based emulsions types HFAE-HFAS, to ISO 6743/4 standard- Water glycol type HFC, to ISO 6743/4 standard: ask for anodized version


Internal ring: pressure die-cast aluminium alloyExternal body: NBR 75 Shore A

Materials

From -30 °C to +80 °C

Temperature

Technical data

Code F perm [N] Mb perm [N∙m]

ANM A 200 ANM A 250 ANM A 300 ANM A 350ANM A 400ANM A 450 ANM A 550 ANM A 660

370720

1450360048006600

1300024000

3065

175740

1100160044009000

Legend of symbolF perm = ammissible load (N)Fp = pumps weight (N)Fm = motor weight (N)Mb perm = bending load (N∙m)

PUMP

TANK WALL

BELL-HOUSING

DAMPING RING

IEC ELECTRIC MOTOR

F perm ≥ Fp + Fm Mb perm ≥ Fm x l1 - Fp x l2

l1 l2

Accessories 102

DAMPING RINGS

Dimensions

Code IEC - Electric motors D1 SD2 F x P Nr. FD3Weight

[kg]Screw tightening torque

[N∙m]4045505850

M10x16M12x16 M12x16 M16x20M16x25

4+4

ANM A 200 ANM A 250 ANM A 300 ANM A 350ANM A 400

144191238260301

80, 90S / 90L100L / 112M132S / 132M

160L/160M, 180L/180M200L

200250300350400

165215265300350

1.702.532.153.954.60

234040

100100

Code IEC - Electric motors D1 SD2 F x P Nr. FD3Weight

[kg]Screw tightening torque

[N∙m]606067

M16x25 M16x25M20x25

8+8ANM A 450 ANM A 550 ANM A 660

352452552

225S / 225M250M, 280M / 280S

315M / 315S

450550660

400500600

6.207.7611.25

100210410

ACCESSORIES

ANM A 200 ÷ 400

ANM A 450 ÷ 660

Dimensions [mm]

Dimensions [mm]

Accessories103

ACCESSORIES FOOT BRACKETS



Dimensions

P

P

R

R

L1

L1

Foot bracket

Foot bracket

H1

H1

R2

R2

B

B

H2

H2

L

L

B1

B1

R1

R1

L2

L2

S

S

H

H

D1

D1

F

F

Weight [kg]

Weight [kg]

360

180207262320

200

86115145170

200

8098

130160

220

100128157188

300

106128172210

30

16141818

30

14141620

30

13212125

261

111146191235

18

8.511.013.013.0

PDM A 350

PDM A 160 PDM A 200 PDM A 250 PDM A 300

350

160200250300

310

135175220270

300

130165215265

13

8.511.513.513.5

4.80

0.450.601.201.80

M16

M8 M10 M12 M12

Foot bracket: pressure die-cast aluminium alloyMaterials

From -30 °C to +80 °C

Temperature

Technical data

The foot brackets are proportioned to support IEC Electric motors with B5 flange without feet.

The range is available from size 71 to size 180.

Dimensions [mm]

Dimensions [mm]

Accessories 104

ACCESSORIES

Damping rods are element to reduce the transmission of the vibrations and emission of noise generated of the system.

Damping rods are available for IEC Electric motors from size 71 to size 315L and for MP FILTRI foot bracket

Dimensions

Damping rods for foot brackets PDMA series.

Damping rods for electrical motors UNEL-MEC

For foot brackets see page 104

Dimensions [mm]

Plate: steel black colourDamping element: NBR 60 Shore A

Materials

DAMPING RODS

Technical data



From -20 °C to +80 °C

Temperature

Any applications not covered by the normal indications contained in this catalogue must be evaluated and approved by the MP Filtri Technical and Sales Department


8098

130160200

8888

15

2121242035

4040404560

5050505070

1212121215

M8M10M12M12M12

2525252535

2020202026

MPDR PDMA160MPDR PDMA200MPDR PDMA250MPDR PDMA300MPDR PDMA350

196196240280446

156156205245400

1414141414

1.51.52.02.58.0

90100100125140140178210254241279305286311349368419406457508

8888888

15151515151515151515151515

212224.52422202028283535353535505050606060

4040404040454560606060606060606060606060

5050505050505070707070707070

100100100120120120

1212121212121215151515151515151515151515

M6M8M8M8

M10M10M10M12M12M12M12M16M16M16M20M20M20M24M24M24

2525252525252535353535353535505050606060

2020202020202026262626333333333333333333

MPDR 71MPDR 80MPDR 90SMPDR 90LMPDR 100LMPDR 132SMPDR 132MMPDR 160MMPDR 160LMPDR 180MMPDR 180LMPDR 200LMPDR 225SMPDR 225MMPDR 250MMPDR 280SMPDR 280MMPDR 315SMPDR 315MMPDR 315L

196176196240240280280340416416446492492492492614614614614704

156146156205205245245300370370400430430445445570570570570660

1414141414141418181818222222222222222222

1.51.71.72.02.02.52.56.07.57.58.08.98.98.9

12.515.115.126.526.529.2

D

D

B1

B1

Code

Code

H1

H1

L2

L2

L

L

H2

H2

B

B

L1

L1

d

d

B2

B2

M

M

H

H

Weight [kg]

Weight [kg]

Accessories105

ACCESSORIES CLEANING COVERS

These pressure die-cast aluminium alloy doors offer superior mechanical strength and are manufactured to DIN 24339 standard. They provide easy access to the inside of the oil tank for inspection and cleaning purposes. On request and for small quantities, to be agreed with MP Filtri Technical and Sales Department, inspection doors can be supplied with: - Customer logo. - Hole cut for visual level indicator. - Hole cut for visual and electrical level indicator. - Oil sample plug

DimensionsOB275

OB400

Cleaning cover according to DIN 24339

Holes on the tank

Holes on the tank

Weight [kg]

1.761.761.761.76

Code Description

OB275P01 OB275P02 GU0275NBR GU0275VTN

Door with MP Logo Blank coverSeal Seal

Weight [kg]

2.902.902.902.90

Code Description

OB400P01 OB400P02 GU0400DINNBR GU0400DINVTN


Cleaning covers: pressure die-cast aluminium alloy / cast ironSeal: NBR 70 Shore A

Materials

From -30 °C to +80 °C

Temperature

Technical data


Compatibility with fluidsAny applications not covered by the normal indications contained in this catalogue must be evaluated and approved by MP Filtri Technical and Sales Department


ø400

ø380

240

ø250

240

Nr.8xø9

Nr.4xø11

18

17

ø300

ø195

Weight[kg]

Weight[kg]

2.062.062.062.06

3.203.203.203.20

Code

Code

Description

Description

Seal

Seal

OB275P01GN OB275P02GNOB275P01GV OB275P02GV


Door with MP Logo Blank coverDoor with MP Logo Blank cover


NBRNBRFPMFPM

NBRNBRFPMFPM

Accessories 106

ACCESSORIESCLEANING COVERS

Dimensions

OB356

OB350

OB475

Holes on the tank

Holes on the tank

Holes on the tank

Weight [kg]

3.403.403.403.40

Code Description

OB475P01 OB475P02 GU0475DINNBR GU0475DINVTN


Weight [kg]

1.801.801.80

Code Description

OB350DIN000 GU0350DINNBR GU0350DINVTN

Door SealSeal

Weight [kg]

1.801.801.80

Code Description

OB356DIN000 GU0350DINNBR GU0350DINVTN

Door SealSeal

ø383

ø248

ø248

23

23

ø475

ø449

ø350

ø350

ø324

ø324

Nr.6xø12

Nr.6xø12

Nr.4xø12

25

Weight[kg]

Weight[kg]

Weight[kg]

2.102.102.102.10

2.102.102.102.10

3.703.703.703.70

Code

Code

Code

Description

Description

Description

Seal

Seal

Seal







NBRNBRFPMFPM

NBRNBRFPMFPM

NBRNBRFPMFPM

Accessories107

ACCESSORIES CLEANING COVERS OPTIONSVisual level indicators LVA series

Transparent amorphous polyamide lens Nylon guard Seal: Series A-NBR - Series V-FPM

Materials

Mineral oilsSynthetic oilsWater base emulsionsPhosphoric esters

From -25 °C to +80 °COperating temperature

10 N∙m max. Tightening torque

Max 1 bar at +80°C Operating pressure

Technical data

Dimensions

Installation

Packaging

Size

Type

A[mm]

B[mm]

H[mm]

C[mm]

LVA 10 LVA 20 LVA 30

LVA...M10LVA...M12LVA...U38LVA...U12

76127254

M10M12

3/8” UNC1/2”UNC

114165292

10.512.510.013.5

Type Nr. pieces per pack

LVA 10

Fixing holesLVA...S LVA...T

A/F 638 23.5 19.5

A A19

B

19øc

H

Preparing for to fit the level on request

LVA 10**LVA 20**LVA 30**

OB275** OB350** OB356** OB400** OB475**• • • • •

• •• •• •

Indicator code

Accessories 108

ACCESSORIES

DimensionsOptional

SizeH 1

[mm]Weight

[kg]

LEG 102 LEG 200

103200

0.190.22

CLEANING COVERS OPTIONS

LEG series electrical level indicators are supplied with a 3-hole fixing flange and a reed switch having NC-NO contacts.

Designed typically for installation on the vertical walls of oil tanks, these instruments can also be mounted to inspection doors of the OB475 series as indicators of minimum and maximum oil levels in the tank.

To operate correctly, the float must be positioned vertically and at a minimum distance of 35 mm from walls made of ferrous metal. To change the contact from NC to NO, simply turn the float upside down. The electrical properties indicated are referred to resistive loads; for capacitive and inductive loads and incandescent lamps, use protection circuits.

Installation

Warning

- Flange: aluminum - Rod: brass - Float: nylon foam - Seals: A= NBR - V= FPM

DIN 43650 CONNECTOR


Materials


Technical data

Electrical float level indicators LEG series

O-Ring seal

M4 - #8 UNCNr. 3 holes

52 70

H1

27

458

71

Ø30

Ø55

Ø42

Ø35

60°

Holes on the tank

Note: Prepared for visual indicator on request Min

Max

Min

Max

Layout of fixing holes for LEG level indicator

Note: Arrange the holes according to the position of the level indicator

nr. 3 holes M4

ø35

ø42

120°

Min

Max

Min

Max

Min Min

LEG 1 Float

Electrical symbol:

1: Common

2: Level

Note: to invert the contact status from NC to NO and vice versa, simply invert the float.

Accessories109

ACCESSORIES CLEANING COVERS OPTIONS

Available customization

Installation Dimensions

For ordering information codes, minimum order quantities, fixing hole positions and other details not indicated in this publication, contact MP Filtri Technical and Sales Department.

The nameplates applied to the new inspection door are identical to those applied to the old door.The difference with the new door is that nameplates are fixed with rivets.

Nameplate with customer logoOrdering information: OB475LOGOP05

Visual level indicators code LCPG42N...S

G 1 1/4”51

52

A/F

42

1411

Accessories 110

ACCESSORIES

Dimensions

ALUMINIUM TANKS

Made of pressure die-cast aluminium alloy, these tanks feature superior strength and optimum design and are ideal for compact hydraulic power units.

Generously proportioned fins ensure efficient cooling.

The tank is supplied with: - M6 threaded fixing holes for lid - feet with M8 threaded fixing holes - G 3/8” threaded drain hole

The lid is sealed by a gasket made of special paper, which must be ordered separately indicating code “GUS 10.0”.

Technical data

SE10LT Code Weight [kg]

4.0

112.

511

2.5

240

310

310 240

102

170250

114 Nr.12xM8

225207

G 3

/8”

95100 100

Accessories111

All data, details and words contained in this publication are provided for information purposes only.MP Filtri reserves the right to make modifications to the models and versions of the described products at any time

for both technical and / or commercial reasons.The colors and the pictures of the products are purely indicative.

Any reproduction, partial or total, of this document is strictly forbidden.All rights are strictly reserved.

112

mpfiltri.com

WORLDWIDE

TO PERFORM

NETWORK

PASSION

EN

- R

ev. 0

2-20

20C

MP

EN

001X

HEADQUARTERS

ITALFILTRI LLCMoscow - Russia+7 (495) 220 94 60 [email protected]

MP Filtri Canada Inc.Concord, Ontario - Canada+1 905 303 [email protected]

MP Filtri France SASVilleneuve la GarenneFrance+33 (0)1 40 86 47 [email protected]

MP Filtri Germany GmbHSt. Ingbert - Germany+49 (0) 6894 [email protected]

MP Filtri India Pvt. Ltd.Bangalore - India+91 80 4147 7444 / +91 80 4146 [email protected]

MP Filtri (Shanghai) Co., Ltd.Shanghai - Minhang District - China+86 21 58919916 [email protected]

MP Filtri U.K. Ltd.Bourton on the WaterGloucestershire - United Kingdom+44 (0) 1451 822 522 [email protected]

MP Filtri U.S.A. Inc.Quakertown, PA - U.S.A.+1 215 529 [email protected]

BRANCH OFFICES

MP Filtri S.p.A.Pessano con BornagoMilano - Italy+39 02 [email protected]

Documents

POWER TRANSMISSION - MP Filtri