Power Tools & Accessories

PERRIN Phone(416) 422-4600

Toll Free: 1-800-387-5117

Fax(416) 422-0290

Toll Free: 1-800-741-6139

—~

j

I

H & W PERRIN

I

90 Thorncliffe Park DriveToronto ON M4HIN5

E-MAIL Address:

sales~perrin.on. ca

FOREDOM® Power TooI~~~Rpnlcwpment Shafts & Sheaths ________________

POWER TOOL KITSContains what you need to begin working...

motor, speed control, handpiece, and accessories.Each kit contains one of our most popular combinations plus an accessory kit

at a lower cost than if purchased individually.

#34.F-2230K1T________ / Model SR (1/6 HP) motor with a forward and reverse feature.

/ Flex shaft and sheath./ #30, three jaw, ball bearing hand piece (capacity 0 to 4mm)/ Chuck key with plastic comfort handle.I Model FCT electronic foot rheostat./ 54 piece accessory kit, compound and a tube of shaft lube./ Rotating bur and tool holder./ Variable speed up to 18,000 RPM/ 2 year warranty

#34.F-2272K1T/ Model SR (1/6 HP) motor with a forward and reverse feature./ Flex shaft and sheath./ #30, three jaw, ball bearing hand piece (capacity 0 to 4mm)/ Chuck key with plastic comfort handle./ Model FCT electronic foot rheostat./ 84 piece accessory kit, chuck/ Variable speed up to 18,000 RPM/ 2 year warranty.

~1~~~~~~~ ________________

OUTER SHEATHS#34.F-77 For motor series CC-DD-MM-R-RB-RM-S-TX-SR#34.F-80 For motor series EE-GG-MMG#34.F-82 For motor series F..JJ-JB#34.F-83 For A series flexaides#34.F-86 For B series flexaides

INNER SHAFTS#34.F.-93 For motor series CC..DD-MM-R-RB-RM-S-SR-K-L-PG-TX#34.F-96A For motor series EE-GG-MMG#34.F-97 For motor series F-JJ-JB#34.F-99 For A series flexa ides#34.F-104 For B series flexaides

Contains:

FOREDOM® ~owj~.

#34.F-10005 Handpiece and motor oil. ~

#34.F-1 0006 Grease for lubricating flexible shafts.

#34.F-AT-1Handpiece and accessory tray.

#34.F-BL 1/6 hp Bench Lathe (mini polishing motor) ____________________________________A powerful, variable speed bench lathe in acompact size ideal for use at the workbench.Buff, polish, deburr, clean, texture, and grind at thespeed you select without changing wheel diameters.

Product Features/ High torque 1/6 horse power, permanent

magnet motor in sealed dust proof housings./ Permanent lubricated ball bearings. _____________________________________/ Heavy duty cast iron base with 4 mounting holes./ Variable speed from 500 to 7,000 RPM with solid state dial control./ Supplied with 2 tapered spindles.

Dimensions~ Width between spindles tips 1 3”~ Motor shaft diameter 5/16”

#34.F-B051 6Convert your bench lathe into a flex shaft machine witha 30” long “Flexade” flexable shaft assembly.Coupling fits the 5/1 6” shaft of the bench lathe.NOTE: Handpiece sold separately.

#34.F-CK-0 Chuck Key in a Molded Plastic HandleThe comfortable plastic handle makes accessory changeseasier and the key more difficult to misplace. Fits allForedom 3 jaw chuck type hand-pieces.

PERRIN 90 Thorncliffe Park Drive Phone FaxToronto ON M4H 1N5 (416) 422-4600 (416) 422-0290E-MAIL Address: Toll Free: 1-800-387- ToIl Free: 1-800-741-6139

sales@perrin.on.ca 5h17

—~ *4WU) fllh~) ~ V V

~w

I FORF~DOM~ 1• It~ 3F~b~e Shag LL~br~c~flt

V VV< ~T

Base 6W x 5”D~ Weight 3.4 kg.

Height to center of motor shaft 3 3/4”~ CSA certified

H & W PERRIN

FOREDOM® Po~t.r T9oIs~~

This 1/8 thick rubbercushion provides an added

layer of comfort to #30 handpiece.Grip slides on easily but holds firm.

#34. F-SCT- 1Offers the same electronicsand smooth control as FCTbut in a much heavier, castiron housing. The added

weight helps keep the control in place.

#34.F-HP72

Standard key for all size #03-jaw handpiece chucks

#34.F-FCT-1Foot control in plastic housing.This solid state control gives

smooth control at all speeds.Our most popular model.

#34.F-TXRFoot control in plastic housing.Same as FCT but for use withTX high torque andTXH heavy duty motors.

#34.F-DP3O Drill PressA rugged and precise stand which converts your Foredom®flexible shaft power tool into a drill press. The sturdy, all metalstand is fully adjustable. It has a 2” throat capacity and a strokelength up to 1 1/4”. The DP3O is designed for use with #30 & 44Thand pieces matched with any foredom flex shaft machine.

90 Thorncliffe Park DriveToronto ON M4H 1N5

E-MAIL Address:

sales~perrin. on. ca

Phone Fax(416) 422-4600 (416) 422-0290

Toll Free: 1-800-387-5117 ToIl Free: 1-800-741-6139

#34.F-G-30Handpiece Grip

#34.F-F37200 #34.F-JCA-2Zinc die cast mini vise Arbor with chuck adjusts

-3firmly holds small work to hold accessories withpieces for precision drilling, shanks from 0 to 5/32”. Comes with chuck key.

~ Features vertical & horizontal Fits on 5/1 6” motor shafts. Use on right hand side.

grooves in jaws plus slots in base #34.F-JCA-1 Same as above but for 1/4”

for bolting to drill press table. diameter motor shafts.

PERRINH & W PERRIN

FOREDOM® Power TooIs~~

~I~1INI~I #34.F-DCH-1~ Dust Collector Hood

Hoods are made of heavy gaugesheet metal construction with nonskid pads on the boftom. Has 21/21’adapter that fits most collectionsystem hoses. Sold individually.

61/2” high x 4~/8” wide x 8~/8” deep Ideal for use with the BL bench lathe

3M - FX Polishing WheelsFX polishing wheels are made of premium grade silicon carbide mineral with brightness enhancersimbedded in a foam-like resin material. They are used for consistent, controllable finishes andpolishing of all metals. As the wheel is being used, new surface enhancers and mineral arecontinuously exposed, offering unvaried finishes.

~ Dimensions 4” x 1” (100 x 25mm)~ Recommended speed range 500 to 2000 RPM~ Available in six different abrasive grades~ Works on platinum, gold, titanium, precious metal clay, silver, brass, chrome-cobalt & steel~ Runs wet or dry. Running wet can produce cooler work pieces and result in faster finishing~ Can be used on most polishers using the tapered spindle adapter #34.F-4568

Number Grit#34.F-FXO2 240#34.F-FXO3 320#34.F-FXO6 600#34.F-FXO8 800#34.F-FX15 1500#34.F-FX3O 3000

#34.F-4568 Ada pter...Fiis into center of wheel to allow useMounting on standard tapered spindles.

#34. F-SJ 35 Soft JawsSoft jaws aftach to any 3”to 4” wide vise withmagnetic strips. Cushionedpads are made of resilientethylene vinyl acetate thatgrip odd shapes and

prevent marking. The magnetic aftachmentallows the Soft Jaws to be installed or removedin seconds.

#34.F-SJ35L Soft JawsSoft jaws aftach to any 3”to 4” wide vise withmagnetic strips.Cushioned pads are

I made of leather thatprevent marking. The

magnetic aftachment allows the Soft Jaws to beinstalled or removed in seconds.

FOREDOM®~

N ______________________________________________________

Maintenance KitsContain a spare flexible shaft to replace worn or broken shafts. One pairof replacement motor brushes, a tube of flexible shaft grease & Instructions.

#34.F-MK8 Maintenance KitFor ball bearing models 5, SB, SM, (SR old YeHP version), SRB, SRM

#34.F-MK9 Maintenance KitFor ball bearing models CC, DD, MM 1 15V

#34.F-MK1 0 New Maintenance Kit For all new 1/6 HP series SR, SRM, SRB motors

#34.F-MKJ 6 New Maintenance Kit For the new 1/3 HP series TX, TXM, TXB motors

#34.F-HP76 Inner Duplex Spring for HandpiecesInner drive spring for handpieces with a flexible center section.

#34.F-HP73 Replacement outer duplex springfor handpieces 8D, 15D, 52D

#34.F-HP74 Replacement outer duplex springfor handpieces 7D, 1OD

/‘

#34.F-TX-TXR High Torque Flexible Shaft MachineModel TX motor supplied with flexible shaft and TXR foot rheostatFeatures: / High torque at all speeds

/ 1/3 hp ball bearing motor./ Operates at speeds up to 15,000 RPM./ TXR foot rheostat/ Accepts all standard handpieces/ Replaceable motor brushes / CSA certified

The TX is Foredom’s most powerful flex shaft, has permanent magnet DCmotors featuring the newest technology. These ball bearing motors haveadvanced rare earth magnets in place of wound fields. This system deliversmore torque at low speed and throughout the entire speed range.

#34.F-SR-FCT Flexible Shaft MachineModel SR motor supplied with flexible shaft and FCT foot rheostatFeatures: / 1/8 hp ball bearing motor.

/ Operates at speeds up to 18,000 RPM./ Reversible _______________

/ FCT foot rheostat Handpiece sold separately/ 39” flexible shaft/ Replaceable motor brushes / CSA certified

Reversible SR model is especially suited for carving symmetrical and otherspecial designs and for keeping wood dust away from the workpiece.

It

I

FOREDOM® Power TooI~~,

#34. F- H P442#34. F- H P443#34. F- H P447#34. F-H P600#34.F-HP6O1#34.F-HP602#34.F-HP603#34.F-HP604#34.F-HP1 03126

ColIet 3/32”Collet 3mmCollet 1/4”Collet set of 4CoIlet 1/32”CoIlet 1/16”Collet 3/32”Collet 1/8”CoIlet 4mm

#34.F-KIT1O #34.F-KIT2O20 piece accessory kit includes 35 piece accessory kit includesSteel cufters & burs, mounted Steel cufters & burs, mounted

points, wire & bristle brushes, points, wire & bristle brushes,rubber abrasives, sanding drums rubber abrasives, sanding& a felt bob. drums & felt bobs.

~ #34.F-WK5O #34.F-HPR15G~ 12 piece woodcarvers assortment. Diamond tipped Pave point for special texturing

. ~ Includes aluminum oxide points, For use in power graver or any collet type

, plated diamond point, vanadium hammer handpiece.~ steel cufter, carving drill, 2~ Typhoon® carbide burs, and 2 mandrels -, 3/32” Shaft notthreaded

#34.F-CHA-4 #34.F-TM-4Collet holder with 1/4” collet. Mounts on 1/4” Tapered spindle (right hand)motor shafts. Holds accessories with 1/4” for motors with 1/4” shafts.shanks. Supplied withwrench. For use onright side.

#34.F-WM-4Wheel mandrel for mounting stones, brushesand other accessories with 1/4” mounting holesFor motors with1/4” shafts.

#34.F-M8Mandrel for use in handpiece.Shank size is 1/8”To hold wheels with 1/4” holes.

#34.F-MP1 1 7P Motor brushes for models R,RB, EE, GG, MMG, & CC-230V sold in pairs#34.F-MP1 19P Motor brushes for models CC, DD, MM-i iSV#34.F-MP132P Motor brushes for new 1/6 HP models SR, SRB, SRM,#34.F-MP262P Motor brushes for models BL-1, BL, BL-iA, BL-2 1\i~~MA.M~#34.F-MP3J9P Motor brushes for models L, PG, TX, TXB, TXM, TXH, TXBH, TXMH#34.F-MP2O1 9P Motor brushes for models 5, SB, SM, (SR old ~/a HP version), SRB, SRM, H, HB, HM, K

for 44, 44T, 44TSJ, 44HT, CHA-4, CHA-5for 44, 44T, 44TSJ, 44HT, CHA-4, CHA-5for 44, 44T, 44TSJ, 44HT, CHA-4, CHA-5for 8, 8D, 8SJ, 28, 28SJ, CHA-1, CHA-2for 8, 8D, 8SJ, 28, 28SJ, CHA-1, CHA-2for 8, 8D, 8SJ, 28, 28SJ, CHA-i, CHA-2for 8, 8D, 8SJ, 28, 28SJ, CHA-i, CHA-2for 8, 8D, 8SJ, 28, 285J, CHA-1, CHA-2for 25, 25H, 35, 35SJ

FOREDOM® Power~T9o1s~~Handpieces _________________________

#34.F-8 Collet type chuck with slim design and chuckguard sleeve that protects fingers when working closeand slides back when changing collets & accessories.Comes with 3/32’ & 1/8” collets plus wrenches.#34.F-8D Same as #8 but with a flexible duplex spring.

#34.F-1O This handpiece has a rotating lever thatreleases and closes the collet for quick changes. It haspre-lubricated ball bearings that do not requirelubrication. Holds standard 3/32” burs.#34.F-1 OD Same as #10 but with a flexible duplex spring.

#34.F-1 5 Hammer handpiece has a reciprocatingrather than a rotary action and is used at low speed byjewellers for sefting and decorative work. It requiresperiodic lubrication. Supplied with 1 anvil point.#34.F-15D Same as #15 but with a flexible duplex spring. ~

Axwt Point Optional Pave Point Optiona’ Carbicio Stylus

#34.F-HP1 01 77 Anvil point for hammer handpiece#34.HPR15PT Diamond tipped pave point forspecial texturing. For use on hammer handpiece.#34.F-10212 Carbide stylus for hammer handpiece.

#34.F-18 Quick change handpiece with a slim gripand a lever action release. Features pre-Iubricatedbearings and holds standard 3/32” burs.

#34.F-1 8D Same as #18 but with a flexible duplex spring.

#34.F-30 Most popular hand piece with pre-lubricated

0 to 4mm. Comes with key in plastic handle.

#34.F-35 Unique handpiece with a ball bearing speedincreaser that produces 2.5 times the speed of the motor.Comes with 1/8” collet.

#34.F-44T Collet type handpiece handles accessoriesup to 6.4mm. Comes with 3 collets. (3/32”, 1/8”, 1/4”)Supplied with pin & wrench.

#34.F-52 Smooth running ball bearing handpiece withplastic barrel & grip. Features a push/pull quick release.

#34.F-52D Same as #52 but with a flexible duplex spring.

FOREDOM® Power~TpoI~~Handpieces continued

Electric Wax CarversThe compact control box has a precision control dial for settingand maintaining temperatures from 95°F (35°C) up to 560°F(294°C). Control box is only 2½” x 2” and all cords areremovable for easy storage. The handpiece is lightweight andcomfortable with cork insulation to keep fingers cool whileworking. The detachable handpiece cord is also lightweight andextremely flexible, perfect for the controlled movements neededfor fine detailing work.

* * * #21 .F-WC-1 Wax carver supplied with 3 tips.h ~ (marked with asterisk *)!w~ jj #21 .F-WC-3 Wax carver supplied with all 7 tips.

~ 11

PERRIN 90 Thorncliffe Park DriveToronto ON M4H 1N5

E-MAIL Address:

sales(~perrin.oii. ca

Phone Fax(416) 422-4600 (416) 422-0290

Toll Free: 1-800-387-5117 Toll Free: 1-800-741-6139

#34.F-20 Quick release handpieceThis handpiece has a rotating lever that releases andcloses the collet for quick changes. It has pre-lubricatedball bearings that do not require lubrication. Shaped bodyprovide comfortable grip. Holds standard 3/32” burs.

H & W PERRIN

FOREDOM® Po~er Tools

#34.F-AK79721 0Foredom® Belt Sander AttachmentAll metal quality-machined device aftaches with ease over the top of a Foredom #30 hand piecewith supplied hex key. Sander has 3 permanently lubricated ball bearings. Use to power sand andsmooth metal, wood, acrylic and composite materials. Unit comes with a 180 grit belt installed andis supplied with 3 additional belts each in grits 100 — 180 — 240. Can be used freehand ormounted into a hand piece holder for more control of the work piece.Measures 4 7/8” long x 1 ¾” wide x 2” high.Uses sanding belts measuring 7 x 257mm

Replacement Belts For Foredom® Belt SanderSupplied in packages of 5 belts. Available in 3 grits (100 — 180 — 240)

#34.F-A797415 Grit 100#34.F-A797425 Grit 180#34.F-A797435 Grit 240

#34.F-MAHH-30Foredom® Hand Piece HolderThis accessory allows you to bring the work piece to the toolinstead of the other way around. Some times being ableto hold the work in both hands gives an extra level of control.Device clamps to any bench or able top up to 21/2” thickand can be telescoped to just the right height. Hand piececan be quickly inserted or removed. Comes with bench clamp,rod and hand piece clamp. For use with all #30 & #44 series

hand pieces.

I

FV ~V