POWER SYSTEMS, INC. CAST IRON POLE LINE HARDWARE · CLAMP, TWO-BOLT GUY Clamp Lngth. 11/ 8" 13 / 16" Two Clamps 10,700 Wire Broke 13,100 Holding Power lbs. Catalog No. GC131 GC138

5A-�

MAY 2006HUBBELL / CHANCE – CENTRALIA, MISSOURI

®®

POWER SYSTEMS, INC.

5A

CAST IRONPOLE LINE HARDWARE

Warranty - MaterialHubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from defects in material and workmanship. Buyer must notify the Company promptly of any claim under this warranty. The Buyer’s exclusive remedy for breach of this warranty shall be the repair or replacement, F.O.B. factory, at the Company’s option, of any product defective under the warranty which is returned to the Company within one year from the date of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR ARISING BY OPERATION OF LAW, COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE IMPLIED, SHALL EXIST IN CONNECTION WITH THE COMPANY’S PRODUCTS OR ANY SALE OR USE THEREOF. The Company shall in no event be liable for any loss of profits or any consequential or special damages incurred by Buyer. The Company’s warranty shall run only to the first Buyer of a product from the Company, from the Company’s distributor, or from an original equipment manufacturer reselling the Company’s product, and is non-assignable and non-transferable and shall be of no force and effect if asserted by any person other than such first Buyer. This warranty applies only to the use of the product as intended by Seller and does not cover any misapplication or misuse of said product.

Warranty - ApplicationHubbell Power Systems, Inc. does not warrant the accuracy of and results from product or system performance recommendations resulting from any engineering analysis or study. This applies regardless of whether a charge is made for the recommendation, or if it is provided free of charge.

Responsibility for selection of the proper product or application rests solely with the purchaser. In the event of errors or inaccuracies determined to be caused by Hubbell Power Systems, Inc., its liability will be limited to the re-performance of any such analysis or study.

©Copyright 2006 Hubbell • 210 North Allen Street • Centralia, MO 65240NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.

Minimum order quantities may apply.Contact factory for test information.

Printed in USARGS 15M

5A-�

MAY 2006 HUBBELL / CHANCE – CENTRALIA, MISSOURI

®®

POWER SYSTEMS, INC.

AUXILIARY EYES

Ductile iron per ASTM A-536Hot dipped galvanized per ASTM A-153

Adds additional guy attachment to existing anchor rod. Also can be used as a pulling eye for guying tension.

CatalogNo.

BB155A

Approx. Ship Wt. Lbs.

Per 100 Pcs.270

Anchor RodDiameter

5/8" - 1"

Maximum Strand Size

1/2"

ThimbleDiameter

11/2"

CatalogNo.

† B14A B14B B12A B12B


Per 100 Pcs.100100137137

Ductile iron per ASTM A-536Hot dipped galvanized per ASTM A-153Contact factory for round bolt hole design.† RUS Listed

Maximum Strand Size

——

5/8"5/8"

Mounting Bolt Diameter

5/8" 3/4"5/8"3/4"

Slotted hole design to allow thru-bolt to be inserted from eye side. Not threaded.

BOLT EYELETS


Per 100 Pcs.

38

Tap

2 STR - 6 SOL

Main9/16" - 1/4"

250 MCM - 4 STR

Cable Range B14

B12

1.50" 1.94"

.56"2.50"

.56"

.56"

1.25"

3.00"

CB1

2.38"

1.25"

4.25"

2.38"

Series CB - Bonding clamps are specified for connecting ground wires to guys, messengers, or static wires.

BONDING CLAMPS

Ductile iron per ASTM A-536Hot dipped galvanized per ASTM A-153; U-Bolts .5" diameter

CatalogNo.

CB1

5A-�


®®

POWER SYSTEMS, INC.


CatalogNo.

ICB1 ICB10

Approx. Ship. Wt. Lbs.

Per 100 Pcs.147262

"A" Dimensions

7 5/8" 12"

Mtg. Bolt Diameter

5/8"5/8"

Equip. Bolt Diameter

3/8"3/8"

Designed to fit NEMA “L” brackets. One bolt mounts bracket to pole.

BRACKET,CUTOUT AND ARRESTER

A

61⁄4"

47⁄8"

11⁄16" DIA.

3⁄8" x 13⁄4" CARRIAGE BOLTTWO PROVIDED

BRACKET, ANGLE CROSSARM

CatalogNo.

1XAB

CrossarmSize

33/4" x 43/4" Max. and

RoundCrossarms


Per 100 Pcs.

610

Mtg. BoltDiameter

3/4"

Stud BoltDiameter

3/4"


Mounts post insulators at 30° angle on crossarm for use on running corners.

5A-�


®®

POWER SYSTEMS, INC.

Mounts post or pin type insulator to top of pole. Variety of bolt hole locations for mounting to pole.

BRACKET,POLE TOP INSULATOR

CatalogNo. IB2 IB3†IB4

Approx. Ship.Wt.Lbs.Per 100 Pcs.

360600600

Mounting Bolt Dia.

5/8" 3/4" 5/8"

Insulator Bolt Dia.5/8" or 3/4"5/8" or 3/4"5/8" or 3/4"

Mtg. Bolt Spacing

43/4"5" or 8"5" or 8"

Dis. From Insul.Base

To Top Hole43/4"63/8"5"

Ductile iron per ASTM A-536Hot dipped galvanized per ASTM A-153† RUS Listed

11⁄16"

11⁄16"

43⁄4"

105⁄8"

5"

11⁄16"

41⁄2"

5"

8"

21⁄2"

13⁄16"

23⁄16"

IB4

21⁄2"

3"

13⁄16"

33⁄4"

IB2

33⁄4"

2"

6"

153⁄8"

IB3

3"

63⁄8"

15⁄16"

13⁄16"

14"

5A-5


®®

POWER SYSTEMS, INC.BRACKET,HORIZONTAL INSULATOR

Use for mounting one or two insulator(s) to pole for armless construction.

Approx. Ship.

Wt.Lbs.Per

100 Pcs.333

1025

Space Between

Insul. Bases

—14"

Insul.AngleDim.

5°—

Mtg. Bolt

Spacing5", 6"4", 5"

Max.Insul.BoltDia. 3/4" 3/4"

Mtg. Bolt Dia.Two 5/8" Two 5/8"

CatalogNo.

1IPTB2IPTB


BRACKET,VERTICAL INSULATOR

Use for mounting pin or post vertical insulators, cutouts, arresters, or cable terminators. Three-hole style can be used for in-line deadending using suspension insulators.

2IPTB

Max.Insul.Mtg.Bolt Dia. 3/4" 3/4" 3/4"3/4"3/4"

PoleMtg. Bolt Dia.

Two 5/8" Two 5/8" Two 5/8"Two 5/8"Two 5/8"

Max.Equip.Mtg.Bolt Dia. 5/8"5/8" 5/8"1/2"5/8"

Pole Mtg. Bolt

Spacing5"5"5"5"5"

Clearance Pole To Insul. Bolt"A"12"18"18"12"18"

Approx. Ship.

Wt.Lbs.Per

100 Pcs.860

13001400

861400

4"

4"

4"

"A"

.58 sq. Hole

T2060594

Side view with hardware

LB12A1 & LB18B14" R

41⁄2"

4"

41⁄2"

T2060594

For 3⁄8" Carriage Bolt13⁄16" Dia.

"A"

5"

LB18B3/LB18B3CH

"A"

11⁄16" Dia. Hole

4"

4"

11/4"Catalog

No.LB12A1LB18B1LB18B3

*T2060594**LB18B3CH


* T2060594 has 3 captive 1/2" x 2" bolts and nuts included**LB18B3CH has 2 captive 1/2" x 2" bolts and nuts included with LB18B3.

11⁄16" Dia.

4"

1IPTB

5A-�


®®

POWER SYSTEMS, INC.

CLAMP, U-BOLT GUYCan be easily installed without disassembling the clamp. The GCU38C and GCU50C have a spacer block to help prevent damage to strand against U-bolt.

Approx. Ship Wt. Lbs.Per 100 Pcs.

80

Type of NutHEX

U- Bolt Dia.3/8"

CatalogNo.

GCU38Strand Size

3/16" - 3/8"


CatalogNo.

ASC2ASC3


175175

MessengerRange

.22" - .56"

.43" - .75"

Pole Clearance

11/2"11/2"

Mounting Bolt Dia.

5/8"5/8"

Rigid keeper for maximum clamping action. Bottom groove is curved to prevent damage to messenger. Top hook to sup-port cable during installation.

CLAMP, AERIAL SUSPENSION

ASC2

ASC5 Heavy duty clamp design uses two bolts to hold messenger to clamp, which prevents clamp slippage if pole shrinks.

CLAMP, AERIAL SUSPENSION


725

MessengerRange

9/16" - 3/4"

Mtg.BoltDia.5/8"

Pole Clear.

3"

GroundWire6 AWG

Catalog No.ASC5

Clamp Bodies and Spacer: Ductile iron per ASTM A-536Hot dipped galvanized per ASTM A-153

GCU38


ClampBolt Dia.

Two-5/8"Sq.Hd.

5A-�


®®

POWER SYSTEMS, INC.

Bolts installed in opposite directions to allow greater wrench clearance.

CLAMP, TWO-BOLT GUY

Clamp Lngth.

11/8"

13/16"

TwoClamps

10,700Wire

Broke13,100

Holding Power lbs.

CatalogNo.

GC131

GC138

Guy Strand

Size

5/16"

3/8"

No.Slip

7,300

7,200

Slip Less Than Dia.of Strand

7,700

9,150

Slip Less Than11/2"

9,600

12,150

GCSERIES

Clamp Bodies: Ductile iron per ASTM A-536Hot dipped galvanized per ASTM A-153


Per 100 Pcs.200

L

5⁄8" Clevis Pin

7⁄8" 13⁄8"

11⁄2" Dia. (Typ)11⁄16" Dia. (Typ)

L14


CatalogNo. L14

Pin Diameter

5/8"L - Inches

14

The L14 is a one-piece extension link with a clevis pin and cotter key.

EXTENSION LINK


66

90

5A-�


®®

POWER SYSTEMS, INC. Crossarm Grid Gain

Crossarm Range

31/2" - 51/2"31/2" - 51/2"

5" - 7"5" - 7"41/2"


80130180180120

CatalogNo.

PG31PG441PG45PG45SPG3545

Dimensions In InchesMax. Bolt Dia. "D"

3/43/43/43/45/8

Pole Dia. Range6" - 10"6" - 11"6" - 11"6" - 11"4" - 9"

B44

55/16 51/441/2

A3444

31/2

Curved face with spurs prevents need of cutting gain into pole. Slotted hole for easy alignment.


Catalog numbers with "S" suffix have extended bolt hole slot.

Flat Back Crossarm Gain


180175120375

CatalogNo.

PG4 PG4A †PG44 PG5

Pole Dia. Range "R"

6" - 11"6" - 11"6" - 11"

10" - 16"

Max. Bolt Dia. "D"

3/47/87/87/8

B51/251/24

71/4

A444

53/8

Dimensions In Inches

Curved face with spurs prevents need of cutting gain into pole. Large surface area reduces crossarm shift.

Ductile iron per ASTM A-536Hot dipped galvanized per ASTM A-153† RUS Listed

Mtg. & Bolt "D"

No. & Dia.

Two - 5/8"

Two - 3/4" Max.


540

950

CrossarmRange

31/2" x 61/2"

4" Channel


B

35/8

47/16

C

6

8

E

11/16

Dia. Hole

13/16

Dia. Hole

CatalogNo.

PG84XB12

PG84XE12

A

8

93/4

D4"

E

B

C 10"

A

GAIN, SHELFProvides strong, stable crossarm connection to the pole. Reduces need for braces. Deadending or guying located directly under arm. Steel crossarm can be mounted to shelf with bolts.

Clamp Bodies: Ductile iron per ASTM A-536Hot dipped galvanized per ASTM A-153

A

B

D

A

B

D

R

5A-�


®®

POWER SYSTEMS, INC.


Per 100 Pcs.6288988898

240225

CatalogNo.

GH151A † GH5 GH5ILS GH6 GH6ILS GH6X GH6XBILS

Max. Guy Strand

Dia.7/16"7/16"7/16"1/2"1/2"5/8"5/8"

Lag Screw Dia.None

1/2"None

1/2"None

1/2" or 3/4"None

GUY HOOKUse in down or span guy applications. Spurs resist down slotting. The overturning action is resisted by the wide lower curved heal pad. Contact Factory about Guy Hooks for use on concrete and steel poles.

Thru-Bolt

Dia. 5/8" 5/8" 5/8" 3/4" 3/4" 7/8" 1"

PIN, ANGLE

CatalogNo.

PS8779 PBA841

Bolt Size

5/8" x 7"5/8" x 7"

Thread Size1"1"

Pin Height Above Arm

5"81/4"

Crossarm Size4"4"


The crossarm corner pin is made of ductile iron, hot dip galvanized. Made with 1" lead threads for 1" thread insula-tors at an angle 60o from horizontal. Attached to the cros-sarm by means of a square head bolt, which is furnished as part of the pin.

GUY HOOK, SPAN TYPEFor guy attachment, use at angles 0o to 30o from horizontal.

CatalogNo.

GH2GH3


Per 100 Pcs.6664

Max. Thru-Bolt Dia.5/8" 3/4"

Max. GuyStrand Dia.

1/2"1/2"


Suffix "ILS" indicates cast in integral lagDuctile iron per ASTM A-536Hot dipped galvanized per ASTM A-153† RUS Listed

41⁄2"25⁄8"

23⁄8"

11⁄2"

15⁄8"

41⁄2"

Bolt 5⁄8" x 7"

GH151AGH5ILS

23⁄4"

33⁄4" 11⁄16" dia.

3⁄8"

27⁄16"

2"

13⁄16" 25⁄8"

9⁄16"

11⁄2"

35⁄8" GH6 15⁄8"

415⁄16"

21⁄2"

GH2

PS8779


Per 100 Pcs.315541

5A-�0


®®

POWER SYSTEMS, INC.

65⁄8"4"

13⁄16" DIA.

41⁄8"

1"

13⁄4"

21⁄32"

4"

51⁄4"

17⁄8"

PLATE, POLE EYEGEP6 style eye plate provides large pad area to spread forces over pole surface. Ideal for guy strain insulator installation.

CatalogNo.

GEP6


269


3/4"

Maximum Pin Diameter

3/4"


Narrow profile eye plate provides clevis eye with 5/8" maxi-mum pin diameter.

CatalogNo.

GEP5CGEP5DGEP5EGEP5G


155155155155

Max. PinDiameter

5/8"5/8"5/8"5/8"


PLATE, POLE EYE

PLATE, POLE EYEAllows guy loop to be made up on the ground as well as providing a clevis eye plate capability. Spurs prevent slip-page down the pole. Contact Factory about eye plates for use on concrete and steel poles.

CatalogNo.

GEP5 GEP5A


175175

Mounting Bolt Dia.

5/8"3/4"

Max. Pin Diameter

5/8"5/8"

Max. Strand Size5/8"5/8"


25⁄8"

11⁄16" Dia.

41⁄2"25⁄8"

31⁄4"

GEP5: 11⁄16" Dia.GEP5A: 13⁄16" Dia.

11⁄16" Dia.

11⁄4"23⁄8"

GEP5


5/8"3/4"3/4"3/4"

Lag Screw Diameter

1/2"Integral Spur

1/2"3/4"

5A-��


®®

POWER SYSTEMS, INC.

Top curved groove has 3/8" radius to allow guy at-tachment. Groove captures guy attachment against pole to help prevent possibility of guy slipping off hook. Also has pole eye lug.

PLATE, POLE EYE

GEP7GEP12

13⁄16" Dia.

17⁄8"

21⁄2"67⁄16"

23⁄8"

A

11⁄4"313⁄16"

"A"

37⁄8" "A"41⁄4"

13⁄8" R

2"

13⁄4"83⁄8"

POLE BRACEFor use in push pole application where guying is not feasible. Brace adjusts for different pole angles.

CatalogNo.

SG611


750


Pole Diam-eter

6" - 11"

Hinge Bolt Dia.

3/4"

Mounting Bolt Dia.

3/4"

BaseDiameter

4" x 8"

TWIN ARM SPACER Connects two crossarms in twin arm application. Lugs provide for deadending attachment.


"F" Dia.Clevis Pin

"B"

"A""C"

"E"

TC2

THIMBLE CLEVIS, GUY WIRE


100275

Commonly used for attaching guy to pole eye plate. Clevis pin has humped cotter key.


CatalogNo.TC1TC2

A49/16 55/16

E3/41

C33/4

45/16


B 13/4 21/2

F5/83/4

D17/16 13/4

Clearance for 3/4"Sq. Hd. Bolt

"B"

41⁄2"

"A"

97⁄8"21⁄2"

CXS

CatalogNo.

CXS1


440

For Cross- Arm Sizes

31/4" x 41/4" & 4" x 5"

Mtg. BoltHole "A"

11/16"

Clevis Bolt Hole "B"

11/16"

8" 4"

CatalogNo.

GEP7GEP7AGEP12

Max. PinDia.7/8"7/8"3/4"

"A"Mtg.

Bolts No. & Dia.Two 1"Two 7/8"One 7/8"


Approx. Ship

Wt. Lbs.Per 100 Pcs.

559564332

6"

"D"

5A-��


®®

POWER SYSTEMS, INC.


204545

100100

Size Inches

*21/4 x 21/4*3 x 3*3 x 3*4 x 4 4 x 4

CatalogNo.

GCW1†GCW31GCW31A†GCW41GCW41A

Thickness At BossInches

1/43/83/81/2

17/32

Max.Bolt Dia.Inches

5/85/83/43/47/8

C U R V E D S Q U A R E

Cast washers provide excellent strength characteristics. Reinforcing ribs helps prevent washer from crushing.

WASHERS, CAST

GCW

† RUS Listed* NEMA Standard


459393

Size Inches

*21/4 x 31/2*3 x 4 3 x 4

CatalogNo.

CRW3†CRW4ACRW4B


3/81/21/2

Max.Bolt Dia.Inches

3/47/81

C U R V E D R E C T A N G U L A R



2020

Size Inches

*21/4 x 21/4*21/4 x 21/4

CatalogNo.

†BB214BB214A


9/329/32

Max.Bolt Dia.Inches

5/83/4

S Q U A R E F L A T



448787

Size Inches*3 Dia. *4 Dia. 4 Dia.


7/161/21/2

CatalogNo.

GWR3GWR4GWR4A

Max.Bolt Dia.Inches

3/47/81

R O U N D F L A T

GWR

BB

GCW31

* NEMA Standard

Documents

POWER SYSTEMS, INC. CAST IRON POLE LINE HARDWARE · CLAMP, TWO-BOLT GUY Clamp Lngth. 11/ 8" 13 / 16" Two Clamps 10,700 Wire Broke 13,100 Holding Power lbs. Catalog No. GC131 GC138