POWER N TE SPOTLT - USAG

POWERIN THE

SPOTLIGHT

2018AUTUMNACTION

NEW PRODUCTS

2,2

CHARACTERISTICS

Square drive 1/2”

Bolt capacity M20

Max torque 1.898 Nm

Torque in use 320÷460 Nm

Strokes per minute 1200

Free speed 6.500 giri/min

Average air consumption 172 l/min

Recommended air pressure 6,2 bar

Sound level 94 ±3 dB(A)

Sound power 105 ±3 dB(A)

Vibrations 6,2 m/s2

Air inlet 1/4”

Ø hose size 10 mm

Weight 2,2 kg

943 PC1 1/2”Code U09430001

Magnesium impact wrench - the top• Magnesium alloy casing• Aluminum motor housing• Removable LED unit rechargeable with USB cable (3.7V 180 mAh Li-Ion battery)• Reversible model with double hammer mechanism• 3 tightening torque settings, always maximum untightening power• Progressive trigger• Rubber side bumpers• Balanced weight for maximum comfort• Soft-touch bi-material handle• Muffler and air exhaust integrated in the handle• Spare rotor blades (6 pieces): code N573343

1.898

INVERSION AND ADJUSTMENT

BY ALUMINIUM LEVER

LED LIGHTINGREMOVABLE

AND RECHARGEABLE

DOUBLE HAMMERMECHANISM:

LESS VIBRATIONSMAGNESIUM ALLOY CASINGLIGHTWEIGHT AND POWERFUL

THE TOP

162 mm 75 mm21

2 m

m

Li-Ion 3.7V180 mAh

2

Airtools

2

CHARACTERISTICS

Square drive 1/2”

Bolt capacity M16

Max torque 1.600 Nm


Strokes per minute 1.300






Vibrations 6,2 m/s2

Air inlet 1/4”

Ø hose size 10 mm

Weight 2,0 kg

929 PC1 1/2”Code U09290001

Magnesium impact wrench• Magnesium alloy casing• Aluminum motor housing• Reversible model with double hammer mechanism• 3 tightening torque settings, always maximum untightening power• Progressive trigger• Rubber side bumpers• Balanced weight for maximum comfort• Soft-touch bi-material handle• Muffler and air exhaust integrated in the handle• Spare rotor blades (6 piceces): code N573341

1.600

INVERSION AND ADJUSTMENT

BY ALUMINIUM LEVER


LESS VIBRATIONS

MAGNESIUMALLOY CASINGLIGHTWEIGHT AND POWERFUL

THE REFERENCE MODEL

162 mm 75 mm21

2 m

m

3

Airtools

THE ALUMINIUM IMPACT WRENCH

2,8

CHARACTERISTICS

Square drive 1/2”

Bolt capacity M16

Max torque 1.490 Nm


Strokes per minute 1.120






Vibrations 5,2 m/s2

Air inlet 1/4”

Ø hose size 10 mm

Weight 2,8 kg

928 AC1 1/2”Code U09280014

Aluminium impact wrench• Steel front casing• Aluminum motor housing• Reversible model with double hammer mechanism• 7 torque settings, in both directions of rotation• Progressive trigger• Soft-touch bi-material handle• Muffler and air exhaust integrated in the handle• Spare rotor blades (6 pieces): code N459388

1.490

INVERSION AND ADJUSTMENT BY RING


LESS VIBRATIONS

ALUMINIUM BODY

190 mm 70 mm

193

mm

4

Air tools

DESCRIPION ITEMS/SIZE PCS

hexagonal sockets 1/2”235 1/2 PN 3/8-7/16-1/2-9/16-5/8-3/4-13/16-7/8-11/16-19/32-21/32

11

hexagonal sockets 1/4”235 1/4 EPN 1/8-5/32-3/16-7/32-1/4-9/32-5/16-11/32-3/8-7/16-1/2-9/16

12

extensions 1/2” 125-250 mm 2extensions 1/4” 50-100 mm 2reversible ratchet 1/2” 1reversible ratchet 1/4” 1spinner with handle 1/4” 1universal joint 1/2” 1universal joint 1/4” 1T-handle with sliding square drive 1/4” 1

Adjustable wrench 294 A 250 1

combination wrenches1/4-5/16-3/8-7/16-1/2-9/16-5/8-11/16-3/4-13/16-7/8-15/16

12

screwdrivers for slot-head screws0,4x2,5-0,5x3-0,8x4-1x5,5-1,2x6,5-1,6x8

6

screwdrivers for PHILLIPS® screws PH 1-2 2screwdrivers for POZIDRIV® screws PZ 1-2 2angled hexagon keys 3/32-1/8-5/32-3/16-7/32-1/4-5/16-3/8 8combination pliers 180 mm 1adjustable pliers 240 mm 1half-round pliers 160 mm 1diagonal cutting nippers 160 mm 1


Phase-testing screwdriver 1scissors for electricians 1utility knife 1mini hacksaw frame 1Tape rule 981 A 3 1hammer for mechanics 300 gr 1bits for slot-head screws 3-4-4,5-5-5,5-6-6,5-7-8 9bits for PHILLIPS® screws PH 00-0-1(x2)-2(x2)-3-4 8bits for POZIDRIV® screws PZ 1-2(x2)-3-4 5bits for Allen screws 1,5-2-2,5-3-4-5-5,5-6-7-8 mm 10

bits for Allen screws1/16-5/64-3/32-7/64-1/8-9/64-5/32-3/16-7/32-1/4

10

TORX® bitsT8-T9-T10-T15-T20-T25-T27-T30-T40-T45

10

TORX® Tamper Resistant bits T8-T10-T15-T20-T25-T27-T30-T35-T45 9Tri-Wing bits 1-2-3-4 4Spanner bits 4-6-8-10-12 5Torq bits 6/8/10 3square bits 0-1-2(x2)-3 5Clutch bits 1/8-5/32-3/16-1/4-5/16 5bits XZN M5-M6-M8 3hexagonal bits for Allen screws with hole 2-2,5-3-4-5-6 6hexagonal bits for Allen screws with hole 5/64-3/32-7/64-1/8-9/64-5/32 6magnetic extensions 1/4" 2

174PIECES

11 kg mm

L. H. D.

460158385

Case with assortment in inches for maintenance• Case with aluminium section shell and metal reinforcements• Double metal closing hinge with lock (key included)• Handle with plastic protection• Three inside panels equipped with elastics to hold tools• Blocking system of the folding panel

002 JMPCode U00020004

606 1/4 APOL

692 J100

606 1/2 APOL

14

5

CAse with Assorment for mAintenAnCe

NEW DRAWER CHESTS

ALUMINIUM DRAWER HANDLES

UPPER COMPARTMENT FOR TOOLS

SLIDES RETURN CLOSING SYSTEM

CENTRALIZED LOCKING

SIDE TRANSPORT HANDLES

6

DrAwer Chests

8DRAWERS

6DRAWERS

4DRAWERS

3DRAWERS

531 DCode U05310004

531 CCode U05310003

531 BCode U05310002

531 ACode U05310001

Drawer chest (empty)• Inside dimensions:

−upper compartment 690x320x60 mm −2 drawers 570x270x40 mm −1 drawer 570x270x60 mm −4 drawers 165x270x40 mm −1 drawer 165x270x90 mm


−upper compartment 690x320x60 mm −2 drawers 570x270x40 mm −1 drawer 570x270x60 mm −3 drawers 165x270x40 mm


−upper compartment 690x320x60 mm −3 drawers 570x270x40 mm −1 drawer 570x270x110 mm


−2 drawers 570x270x40 mm −1 drawer 570x270x60 mm

32 kg mm

L. H. D.

700435335

30 kg mm

L. H. D.

700380335

23 kg mm

L. H. D.

700435335

20 kg mm

L. H. D.

700292345

7

DrAwer Chests

Parallel jaw vice for workbenches• Fully forged steel model with jaws and body in one piece• Rear jaw shaped like an anvil• Ground prismatic double guide with screws for regulating the

parallelism of the jaws and for recovering tightness of grip• Supplied with pipe clamp jaws

DIMENSION (AXBXC)

LENGTH(L)

WHEIGHT

175x235x123 mm 532 mm 25 kg

L

A

B

C

RANGE OF WORK BENCHES

498 BCode U04980015

Static strength ofthe top up to 2.000 kg

(model 2 metre)

Version with wooden top30 mm

Lower shelf included

Sheet steel worktop2,5 mm with sides

Larger brackets90 mm

Reinforced structurein painted sheet steel

Arranged forground fixing

8

work benChes

WOOD

WOOD

WOOD

STEEL

STEEL

STEEL

506 A1/1000Code U05060001

506 A1/1500Code U05060002

506 A1/2000Code U05060003

• Dimension: 1.000x700x850 mm• Weight: 55 kg






506 A2/1000Code U05060011

506 A2/1500Code U05060012

506 A2/2000Code U05060013

1000 kg

1500 kg

2000 kg

1000 kg

1500 kg

2000 kg

9

work benChes

007 FBVCode U00070041

007 FBICode U00070048

007 FBECode U00070049

007 FBMCode U00070050

Folding tool bag (empty)• High strength fabric• 8 pockets for tools• Elastic straps to hold a hammer• Two handles for good grip• Rear belt to fix the bag to a trolley• Possibilty to add a shoulder belt (not included)• Optional shoulder belt: code U00070001Q

Folding tool bag with assortment for MAINTENANCE

Folding tool bag with assortment for ELECTRICIANS

Folding tool bag with assortment for MOTORCYCLES

900 g mm

L. H. D.

36029070

REAR BELT TO FIX THE BAG TO

A TROLLEYPossibilty to add a shoulder belt (not included)

360 mm

20PIECES

19PIECES

27PIECES


Universal plier 150 CX 180 1Box-joint adjustable plier 180 C 250 1Hacksaw frame 201 1

Scissor for electricians 207 N 1

Angled hexagon keys withspherical head

280 LTS/S9: 1,5-2-2,5-3-4-5-6-8-10

9

Adjustable wrenche 294 A/200 1Screwdriversfor slot-head screws

322 0,8x4x100-1x5,5x100-0,6x3,5x75

3

Screwdrivers for PHILLIPS® screws

322 PH 1x100-2x125 2

Hammer 382/300 1


Combination pliers 1000 V 085 N 180 1Screwdrivers for slot-head screws 1000V

092 0,4x2,5x75-0,8x4x100 2

Screwdrivers for PHILLIPS® screws 1000 V

092 PH 1x100-2x125 2

Screwdrivers for POZIDRIV® screws 1000 V

092 PZ 2x125 1

Scissor for electricians 207 E 1


280 LTS/S9: 1,5-2-2,5-3-4-5-6-8-10

9

Reversible ratchet combination wrencheswith locking ring

285 KA 8-10-13 3


Half-round extra-long nose pliers with straight jaws

133 CX 160 1

Universal plier 150 CX 180 1Long angled keys with spherical head for TORX® screws

280 LTSTX/S8 T10-T15-T20-T25-T27-T30-T40-T45

8


280 LTS/S9 1,5-2-2,5-3-4-5-6-8-10

9

Combination wrenches 285 8-10-12-14 4Screwdriversfor slot-head screws

322 0,8x4x100-1x5,5x125 2

Screwdrivers for PHILLIPS® screws

322 PH 1x100-2x125 2

1000V

10

tool ContAiners

007 SBVCode U00070040

007 SB 150 CXCode U00070052

007 SB 178 NCCode U00070053

007 SB 294 ACCode U00070054

Compact tool bag (empty)• High strength fabric• Main compartment with zip closure• Back pocket with zip closure

Compact tool bag with screwdrivers and combination pliers

Compact tool bag with screwdrivers, angled hex keys, adjustable pliers and scissors

Compact tool bag with adjustablewrench and ratchet

60 g mm

L. H. D.

26011050

14PIECES

13PIECES

4PIECES


Universal plier 150 CX 180 1

Screwdriversfor slot-head screws

322 0,5x3x75-0,8x4x100 2

Screwdrivers for PHILLIPS® screws 322 PH 1x100-2x125 2Angled hexagon keys withspherical head

280 LTS/S9 1,5-2-2,5-3-4-5-6-8-10 9


Box-joint adjustable plier 178 N 250 1

Scissor for electricians 207 C 1

Hexagon keys 280 N/S9 1,5-2-2,5-3-4-5-6-8-10 9

Screwdriversfor slot-head screws

322 0,8X4X100 1

Screwdrivers for PHILLIPS® screws 322 PH 1x100 1


Reversible ratchet combination wrenches with locking ring

285 KA 8-10-13 3

Adjustable wrenche 294 AC/150 1

260 mm

11

tool ContAiners

Folding top• Metal• To have more working surface when necessary• Maximum static load: 20 kg• Working surface: 36x45 cm• For current models: 518 SP, 519 R• For previous models 519 RX

519 RA6Code U05190217

Document suport• Metal• Possibility to hang A4 documents• For current models 519 R• For previous models 519 RX

519 RA8Code U05190219

Wooden top for vice• 23 mm multilayer beech• For current models 519 R• For previous models 519 RX• Vice not included

519 RA9Code U05190218

Stanley Black & Decker Italia S.r.l.Via Volta, 3 - 21020 Monvalle (VA)

Tel. +39 0332 790111 - Fax +39 0332 [email protected]

usag-tools.net

The images shown in this catalogue are not binding.Stanley Black & Decker Italia S.r.l. reserves the right to change the technical characteristics of its products at any time.

ACCessories for roller CAbinets

Documents

POWER N TE SPOTLT - USAG