Power International - Brochure

7/30/2019 Power International - Brochure

1/19

17/B-2,SHIV SHAKTI

INDUSTRIAL ESTATE, L.B.S.

ROAD, OPP. DAMODAR

PARK, GHATKOPAR (W) ,

MUMBAI-400086.


2/19

Key Features:

1. Double Capstan Cable Pulling Machine.2. Display of real time cable pulling tension.

3. Display of total length pul led.

4. Display of speed of cable pulling.

5. Pre Set option for Total Length & Max. Tension for the cable pulling .

6. Printing protocol.

7. Deadman's lock.

8. Emergency Stop Button

THAL ER Cable Capstan Winch 10 T


3/19

STRAIGHT ROLLER

All powder coated, heavy duty assembly suitable for cables upto 140mm dia. Steel frame fitted large waisted solid aluminiumroller running on sealed bearings & galvanized shaft.

SMAL L STRAIGHT ROLLER

STRAIGHT ROLLER SMALL STRAIGHT ROLLER

Width 215 mm 220mm

Height 300 mm 230mm

Length 360 mm 300 mm

Roller Length 195 mm

(Tolerance: +/-10mm)


4/19

HEAVY DUTY STRAIGHT ROLLER

All powder coated, heavy duty assembly suitable for cables up to 160mm dia. Steel frame fitted large waited solid aluminumroller running on sealed bearings & galvanized shaft.

Width: 265mmHeight: 180mmLength: 540mmRoller Length: 190mm(Tolerance: +/-10mm)


5/19

STRAIGHT ROLLER WITH V-ASSEMBLY

All powder coated, heavy duty assembly suitable for cables up to 160mm dia. Steel frame fitted with large waited solid steelrollers running on sealed bearings & galvanized shaft in V assembly.

Width: 460mmHeight: 275mmLength: 460mmRoller Length: 135mm

(Tolerance: +/-10mm)


6/19

All powder coated finish & using two vertical & one horizontal Aluminum rollers for taking heaviest cables rounddifficult corners. The assembly is of a robust construction for use in the most arduous conditions and can be linkedtogether with stake pins provided to form a continuous corner roller system.

Height: 320mmWidth: 335mmLength: 525mm(Tolerance: +/- 10mm)

TRIANGULAR / TRIPLE CORNER ROLLER


7/19

All powder coated, heavy duty assembly suitable for cables up to 160mm dia. Steel frame fitted on all four sideswith large waited solid steel rollers running on sealed bearings & galvanized shaft.

Height: 500mmWidth: 345mmLength: 380mmRoller Length: 195mm(Tolerance: +/-10mm

BEND GUIDE ROLLER


8/19

HEAVY DUTY V ROL LER ASSEMBLY V ROL LER ASSEMBLY

A guide roller in front of the drum which centralizes the cable from the drum into the trench. Sealed roller bearingsfitted in steel roller. Mounted in heavy duty steel frame.All powder coating as well as Zinc Plating Finish.

HEAVY DUTY V ROLLER

ASSEMBLY

V ROLLER ASSEMBLY

Width 500 mm 300mm

Height 480mm 270mm

Length 1000mm 750mm

(Tolerance: +/- 10mm)


9/19

PRESSURE CUM - BEND ROLLER

Combination of two vertical rollers & onehorizontal roller asa basefor cables movingtowards thebends. Theoutervertical roller help protectthecable jumpingoutside& thusensuring prevention ofanysort of cabledamage.Aboveroller comesalongwith ahorizontal rodadjusted on thetop & thebottomwith adjustablelength thatgetsfitted& tightened upattheextremeendsof thetrenches.

PressureCumBend roller is used wherethere is nobaseof ground to thecable& also when there areutilities belowthecablebeinglaid.

Height: 440 mmWidth: 330 mmLength: 390 mm(Tolerence: +/- 10mm)


10/19

KANYA ROLLER

All powder coated, heavy duty steel assembly suitable for laying cables as per the required site

condition. Steel rollers running on bearings & galvanized shaft.


11/19

Designed to place at the end of the manhole or pit entrance to ease the cable in. Triple Aluminium roller on tubular steelframe

Height: 365 mmWidth: 210mmLength: 490 mm(Tolerance: +/- 10mm)

MANHOLE ROLLERS


12/19

BASE ROLLER

Base roller is suitable for section between the cable drum and the start of thetrench as per the site requirement.Base rollers are made of steel rollers fitted in sealed bearing running on galvanized shaft &rubber bushing for smooth rotations.


13/19

HORIZONTAL & VERTICAL ROLL ER

Six vertical steel rollers each running on roller bearings and mounted in heavy duty steel frame.Power coated finish

Height: 310mmWidth: 90mmLength: 830mm

Note:These rollers are used in conjunction with horizontal rollers as per the photograph and where large diameter cableshave a limited bend radius.Vertical roller comprise of one frame with several verticals rollers attached in it.Horizontal roller comprise of one frame with two horizontal rollers attached in it.


14/19

NYLON CABLE CLEATHDPE CABLE CLEAT

FEATURES :-

Manufactured in high strength HDPE & glass fiber material.High impact resistance.Unaffected by corrosive environments.Higher mechanical strength than polythene.High level of resistance to UV lights.Available from 50 to 110 mm Diameter.


15/19

ALUMINUM TREFOIL CLEAT ALUMINIUM CLEAT


16/19

POWER ROLLER

Overall Dimensions

Length 600 mm

Width 550 mm

Height 485 mm


17/19

HYDRAULIC CABLE J ACK MECHANICAL CABLE J ACK

Features* Lifting Capacities : 3.0 Ton* Improved Screw Design* Extra Strong Base Plate* Robust and Easy to Use* L ifting Height 310mm* Design for Heavy Duty Use

* Easy to Handle and Simple Operation


18/19

20T Thaler make Hydraulic Jack


19/19

Cable Drum Trailer

Documents

Power International - Brochure