Upload
brit-lube-limited
View
215
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Application of Brit-Lube's products in the Power Industry Generation Industry.
Citation preview
POWER
1
APPLICATIONS FOR BRIT-LUBES’ LUBRICANTS IN THE POWER
GENERATION INDUSTRY
The lubricant recommendations listed below provide details of the most cost effective products.
Coal Handling Equipment
Bunker Tripper All Bearings Load-Guard
Coal Conveyors Conveyor Bearings Multi-Tef Grease MP2/3
Coal Crushers Grease Feed Bearings Multi-Tef Grease MP2/3
Coal Screens Vibrator Eccentrics Vibration Resistant Grease 2.5
Left is a generating station
coal handler opening doors under a coal wagon. The coal falls into a large hopper and
then onto a conveyor belt, right, that transports the coal to storage or directly to the
main boiler. Coal fired power stations can burn more than 1000 tonnes of coal per day.
The coal is transferred to the crushers before being conveyed to the main boilers.
POWER
2
Coal Feeder Delivery Equipment
Main Bearings Multi-Tef Grease MP2/3
Bush bearings Pretreat with Assembly Grease
Multi-Tef Grease MP2/3as service lubricant
Boiler Room
Boilers and Associated Equipment Mechanical Stokers Multi-Tef Grease MP2/3
Damper Flue Inlet Bearings Synthetic HT2
Flue Fan Bearings Bearings Synthetic HT2
Boiler Valve Lubrication All Valves Silicone Valve Seal
Handwheels Synthetic HT2
Butterfly Valves Bush bearings Assembly Grease
Soot Blowers (Hopkinson) Motor Bearings Multi-Tef Grease MP2/3
Trip Levers Multi-Tef Grease MP2/3
Travelling Gearbox Multi-Tef Grease MP2/3
Jockey Sprocket Bearing Multi-Tef Grease MP2/3
Front Support Rollers Multi-Tef Grease MP2/3
Ash Conveyors Support Plates Multi-Tef Grease MP2/3
Hopper Scroll and Follower Multi-Tef Grease MP2/3
Sump Pumps All Bearings Multi-Tef Grease MP2/3
Vibrator Feeders Hopper Doors and Bearings Multi-Tef Grease MP2/3
Boom Stacker Bearings Multi-Tef Grease MP2/3
Adjustment Block & Slides Multi-Tef Grease MP2/3
Ground Hoppers Bearings Multi-Tef Grease MP2/3
Coolers
Fans Bearings Load-Guard
Pumps Bearings Load-Guard
Butterfly Valve
Coal is transported into the plant by way of five different conveyors. Before it enters the plant, the coal is tested for heat value, sulphur content and other
qualities and is crushed further. Any pieces of iron in the coal are also separated. The coal is stored in large bunkers before passing through coal feeders that
measure the amount of coal needed to make
Soot Blowers are used for boiler maintenance
POWER
3
Generation Room
Circuit Breakers Gearboxes Brit-Gear Oils
Switchgear Bearings and Gears Multi-Tef Grease MP2/3
Jack Screws Multi-Tef Grease MP2/3
On Load Tap Changes Bearings and Gears Load-Guard
Cold Water Pumps Bearings Aqua-Guard
Make-up Pumps Bearings Multi-Tef Grease MP2/3
Air Blast Circuit Breakers ChemTef 2
Circuit Breakers Tripping Mechanisms Multi-Lube
Other
Dust Pumps Bearings Load-Guard
Conveyors Bearings Load-Guard
Acid Plant Valve Stem Lubrication Chemtef 2
The foregoing information is given in good faith but without warranty
Steam enters the turbine from the main boiler at 124 bar (1,800 psi) and at 540ºC (1000ºF).
Turbine and generator turn at 3,600 rpm generating 100 megawatts of electricity. (Enough power to illuminate one million 100 watt light bulbs).