Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
POST-LAUNCH VALIDATION OF GCOM-C /SGLI GEOPHYSICAL PRODUCTS
JAXA Earth Observation Research Center
GCOM-C/SGLI instrumentSGLI channels
CH
l Dl Lstd Lmax SNR at Lstd IFOV
VN, P, SW: nmT: mm
VN, P: W/m2/sr/mm
T: Kelvin
VN, P, SW: -
T: NEDTm
VN1 380 10 60 210 250 250VN2 412 10 75 250 400 250VN3 443 10 64 400 300 250VN4 490 10 53 120 400 250VN5 530 20 41 350 250 250VN6 565 20 33 90 400 250VN7 673.5 10 23 62 400 250VN8 673.5 20 25 210 250 250VN9 763 12 40 350 400 250
VN10 868.5 20 8 30 400 250VN11 868.5 20 30 300 200 250
P1 673.5 20 25 250 250 1000P2 868.5 20 30 300 250 1000
SW1 1050 20 57 248 500 1000SW2 1380 20 8 103 150 1000SW3 1630 200 3 50 57 250SW4 2210 50 1.9 20 211 1000T1 10.8 0.74 300 340 0.2 250/500T2 12.0 0.74 300 340 0.2 250/500
Multi-angle obs. for λ= 670nm and 865nm
Along track
Multi-channel Obs. @Nadir (17 chs) Swath: 1150km (VN, P)1400km (SW, T)(250m resol.: 11chs, 500m resol.:
2 chs, 1km resol.: 4chs) 250m over land & coastal sea
Forward(+45 deg.)
Backward(-45deg.)
Nadir
Visible and Near-infrared Radiometer
(VNR)
InfraRed Scanner (IRS) (SW1-T2)
Non-polarization telescopes (VN1-11)
Polarization (along-track slant) telescopes (P1-2,three pol. angles)
SGLI can cover the whole globe every 2days 2
GCOM-C was successfully launched
from TanigashimaSpace Center on
December 23rd 2017
Daily coverage of GCOM-C/SGLI Jan. 1, 2018
The new SGLI features: 250m (VNIR) and 250&500m (TIR)
channels and two polarization / multi-direction channels (P).
Land [S:9, R:5]Surface reflec-tance
Precise geometric correctionAtmospheric corrected reflectance
Vegeta-tion and carbon cycle
Vegetation indexAbove-ground biomassVegetation roughness indexShadow indexFraction of Absorbed Photosynthetically available radiationLeaf area index
Tempera-ture Surface temperature
Applica-tion
Land net primary productionWater stress trendFire detection indexLand cover typeLand surface albedo
Atmosphere [S:8, R:3]
Cloud
Cloud flag/Classification Classified cloud fraction Cloud top temp/heightWater cloud optical thickness /effective radiusIce cloud optical thicknessWater cloud geometrical thickness
Aerosol
Aerosol over the ocean Land aerosol by near ultra violet Aerosol by Polarization
Radia-tion
budget
Long-wave radiation flux
Short-wave radiation flux
Cryosphere [S:4, R:8]
Area/ distribu-
tion
Snow and Ice covered areaOkhotsk sea-ice distributionSnow and ice classificationSnow covered area in forest and mountain
Surface proper-
ties
Snow and ice surface TemperatureSnow grain size of shallow layerSnow grain size of subsurface layerSnow grain size of top layerSnow and ice albedoSnow impurityIce sheet surface roughness
Bounda-ry
Ice sheet boundary monitoring
Common (Level-1)
Radiance TOA radiance (including system geometric correction)
Ocean [S:7, R:7]
Ocean color
Normalized water leaving radianceAtmospheric correction parameterPhotosynthetically available radiationEuphotic zone depth
In-waterChlorophyll-a conc.Suspended solid conc.Colored dissolved organic matter
In-water Inherent optical propertiesTempera
-ture Sea surface temperature
Applica-tion
Ocean net primary productivityPhytoplankton functional typeRedtidemulti sensor merged ocean colormulti sensor merged SST
Blue: Standard products [L1: 1 product, L2: 28 products]Pink: Research products [L2: 23 products]
GCOM-C/SGLI Products
Level-2
4
Accuracy Requirements and Validation Methods for Land products標準プロダクトStandard Product
日照域・全日別Day/Night
分解能Resol.
精度目標 Accuracy Targets 主な検証手段
Validation MethodsPriority
リリースRelease
標準Standard
目標Goal Release Standard Goal
精密幾何補正済放射輝度Precise geometric correction
全日Day&Night 250m <1pixel <0.5pixel <0.25pixel ・GCP database derived from AVNIR-2 etc. ◎ ◎ ◎
大気補正済陸域反射率 (雲検知含む)Atmospheric corrected reflectance (incl. cloud detection)
地上日照域Daytime only
250m0.3 (<=443nm), 0.2 (>443nm) (scene)*11
0.1 (<=443nm), 0.05 (>443nm) (scene) *11
0.05 (<=443nm), 0.025 (>443nm) (scene)*11
・In-situ observation ◎ ◎ ◎
- Sim. of SR with BiRS ○ ○ ○
- Other Sat. (MODIS, VIIRS etc.) △ △ △
250m
Grass: 25% (scene), Forest: 20% (scene)
Grass:20% (scene), Forest:15% (scene)
Grass:10% (scene), Forest:10% (scene)
・In-situ observation ◎ ◎ ◎植生指数Vegetation index - Other Sat. (MODIS, VIIRS etc.) ○ △ △
1km Grass: 50%, Forest: 100%
Grass:30%、Forest:50%
Grass:10%, Forest:20%
・In-situ observation@ 500mx500m site ◎ ◎ ◎
地上部バイオマスAbove-ground biomass
Ecological Model (BEAMS) ○ ○ ○
- Other Sat. (MOLI, GEDI, PALSAR2, other SARs etc.) ○ △ △
植生ラフネス指数Vegetation roughness index 1km Grass・Forest:
40% (scene)Grass・Forest:20% (scene)
Grass・Forest:10% (scene) ・In-situ observation ◎ ◎ ◎
カゲ指数Shadow index
250m, 1km
Grass・Forest:30% (scene)
Grass・Forest:20% (scene)
Grass・Forest:10% (scene)
・In-situ observation ◎ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) △ △ △
光合成有効放射吸収率fAPAR 250m Grass: 50%,
Forest: 50%Grass:30%、Forest:20%
Grass:20%, Forest:10%
・In-situ observation@ 500mx500m site ◎ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) ○ × ×
葉面積指数Leaf area index 250m Grass: 50%,
Forest: 50%Grass:30%、Forest:30%
Grass:20%, Forest:20%
・In-situ observation@ 500mx500m site ◎ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) ○ × ×
地表面温度Surface temperature
全日Day &Night 500m Less than 3.0K
(scene) (気温)
Less than 2.5K (scene) (放射)
Less than 1.5K (scene) (放射)
・In-situ observation ◎ ◎ ◎
- LST derived from Tair at Tower sites,automated on Cal/Val web △ △ △
- Other Sat. (MODIS, VIIRS etc.) ○ × ×
◎: Primary data, ○: Secondary data△: Auxiliary data
Accuracy Requirements and Validation Methods for Atmosphere products ◎: Primary data, ○: Secondary data△: Auxiliary data
標準プロダクトStandard Product
日照域・全日別Day/Night
分解能Resol.
精度目標 Accuracy Targets 主な検証手段Validation Methods
PriorityリリースRelease
標準Standard
目標Goal Release Standard Goal
雲フラグ・タイプCloud flag/Classification
全日Day & Night 1km 10% Evaluated as the cloud fraction
product- Cloud amount from sky-camera based on BI-SI
method ◎ △ △
雲種別雲量Classified cloud fraction (Classified CF)
地上日照域Daytime only
Scene: 1km,Global: 0.1deg.
20% (as solar rad.) (*9)
15% (as solar rad.) (*9)
10% (as solar rad.) (*9)
- Irradiance obs. from BSRN, Skynet etc. ◎ ◎ ◎- Climatology from ISCCP etc.- Classified CF from sky-camera ○ △ △
雲頂温度・高度Cloud top temp/height
全日Day & Night 1K (*4)
3K(*5)/2km (*5) 1.5K/1km (*5)
- RS data from ground, airborne, and other satellites (lidar, radar, radiometer △ ◎ ◎
- Cal of TIR bands & JMA Objective analysis data ◎ - -
水雲光学的厚さ・粒径Water cloud OT/effective radius
地上日照域Daytime only
10%/30% (as COT, Re) (*6:other sat.)
100% (as CLW) (*7:PMR on the ground)
20% (as COT, *8) / 50% (as CLW) (*7)
・In-situ obs. of CLW by Skynet PMR △ ◎ ◎
・In-situ obs. of COT by Skynet sky-radiometer △ △ ◎- Other Sat. (MODIS, VIIRS etc.) ◎ △ △
30% (*6:other sat.) 70% (*8) 20% (*8)
・In-situ obs. of COT by Skynet sky-radiometer △ ◎ ◎氷晶雲光学的厚さIce cloud optical thickness
- Other Sat. (MODIS, VIIRS etc.) ◎ △ △
海洋上エアロゾルAerosol over the ocean
0.1(monthly aveta_670,865) )(*10)
0.1(scene’s ta_670,865)(*10)
0.05(scene’s ta_670,865)
・In-situ obs. of AOT by Skynet sky-radiometer △ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) ◎ △ △陸上エアロゾル(近紫外)Land aerosol by near ultra violet (ta@380nm)
0.15(monthly ave. ta@ 380nm for UV, 670& 865nm for Pol) )(*10)
0.15(scene aveta @380nm for UV, 670&865nm for Pol)(*10)
0.1(scene’s ta@ 380nm for UV, 670& 865nm for Pol )
・In-situ obs. of AOT by Sky-radiometer △ ◎ ◎
陸上エアロゾル(偏光)Aerosol by Polarization - Other Sat. (MODIS, VIIRS etc.) ◎ △ △
Accuracy requirements for Ocean products標準プロダクトStandard Product
日照域・全日別Day/Night
分解能Resol.
精度目標 Accuracy Targets 主な検証手段
Validation MethodsPriority
リリースRelease
標準Standard
目標Goal Release Standard Goal
正規化海水射出放射輝度Normalized water leaving radiance
地上日照域
Daytime only
Coast (Cst): 250m
Open Ocean (OO): 1km
Global:4-9km
60% (443~565nm)
50% (<600nm)0.5W/m2/str/um (>600nm)
30% (<600nm)0.25W/m2/str/um (>600nm)
・In-situ observation ◎ ◎ ◎- Temporal variation of SGLI nLw, automated on Cal/Val web △ △ △
- Other Sat. (MODIS, VIIRS etc.) ○ ○ ○大気補正パラメータAtmospheric correction param
80% (AOT@865nm)
50% (AOT@865nm)
30% (AOT@865nm)
・In-situ observation ◎ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) ○ ○ ○光合成有効放射量Photosynthetically available radiatioin
20% (10km/M) 15% (10km/M)
10% (10km/M)
・In-situ observation ◎ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) ○ ○ ○
クロロフィルa濃度Chlorophyll-a concentration
-60~+150%(OO) -60~+150%
-35~+50% (OO), -50~+100% (Cst)
・In-situ observation ◎ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) ○ ○ ○懸濁物質濃度Suspended solid concentration
-60~+150% (OO) -60~+150% -50~+100%
・In-situ observation ◎ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) ○ ○ ○有色溶存有機物吸光係数Colored dissolved organic matter
-60~+150% (OO) -60~+150% -50~+100%
・In-situ observation ◎ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) ○ ○ ○
海面水温Sea surface temperature
全日Day & Night
Coast: 500mOther: same as above
0.8K (Daytime only)
0.8K (Day & Night)
0.6K (Day & Night)
・In-situ SST obtained from iQuam, automated on Cal/Val web ◎ ◎ ◎
- Other Sat. (MODIS, VIIRS etc.) △ △ △・In-situ observation ○ ○ ○
◎: Primary data, ○: Secondary data△: Auxiliary data
7
Accuracy requirements for Cryosphere products標準プロダクトStandard Product
日照域・全日別Day/Night
分解能
精度目標 Accuracy Targets 主な検証手段
Validation MethodsPriority
リリースRelease
標準Standard
目標Goal Release Standard Goal
積雪・海氷分布Snow and Ice covered area
地上日照域
Daylight
Scene: 250m, Global: 1km
10% 7% 5%- DCDF snow depth only over land,
automated on Cal/Val web ○ ○ ○- Other Sat. (MODIS, VIIRS, Landsat-8
etc.) ◎ ◎ ◎
オホーツク海海氷分布OKhotsk sea-ice distribution
250m 10% 5% 3%・Other Sat. (MODIS, VIIRS, Landsat-8
etc.) ◎ ◎ ◎
・Photos etc. (Aerial photos, hand-drawn ice map) △ △ △
雪氷面温度Snow and ice surface Temperature
Scene: 500m,
Global:1km
5K 2K 1K
・Tsurf from SIGMA, BSRN AWS@ Greenland, Dome-C etc., automated on Cal/Val web
○ ◎ ◎
・In-situ observations @Greenland, Svalbard etc. ○ ○ ○
・Other Sat. (MODIS, VIIRS, Landsat-8 etc.) ◎ △ △
浅層積雪粒径Snow grain size of shallow layer
100% 50% 30%
・Auto-Optical Measurements @Hokkaido, Svalbard etc.) ○ ○ ○
・In-situ observations @Greenland, Hokkaido, Svalbard etc. (campaign) ○ ◎ ◎
・Other Sat. (MODIS, VIIRS, Landsat-8 etc.) ○ △ △
・Vicarious Val. with Climatology of Temp-Grain size relation ◎ ○ ○
◎: Primary data, ○: Secondary data△: Auxiliary data
PI’s site
AsiaFlux/PEN sites
CEOS/RadCALNET
PI’s sites
Validation Method:- Accuracy targets were defined as RMSE evaluated with the in-situ measured reflectances acquired at the
ground surface with moderate reflectance of around 0.2 at solar zenith angles less than 30 degrees. - In addition, the release threshold is defined as the value acquired at the condition of aerosol optical depth
(at the wavelength of 500 nm) less than 0.25.
Validation data and condition etc.:- In-situ data measured within the time difference of 1-1.5 hours from SGLI observation at the 9 sites shown
below (for the period during Jan. 24 to Sep. 28, 2018)
Validation Results of Land ProductsAtmospherically corrected reflectance (RSRF)
0.01536%
0.01326%
0.01423%
0.01723%
0.02120%
0.02727%
0.02619%
0.07627%
0.03631%
0.0369%
0.08327%
0.03411%
0.06220%
Evaluated with in-situ measured flux reflectances because in-situ BRDF observations are difficult on the ground within 1 km x 1km field of view.
0.0329%
Validation Results:
Estimated errors Release threshold Standard accuracy Goal accuracy
0.019(<=443nm)0.084 (>443nm)
0.3 (<=443nm) ®150%0.2 (>443nm) ®100%
0.1 (<=443nm) ®50%0.05 (>443nm) ®25%
0.05 (<=443nm) ®25%0.025 (>443nm) ®13%
Release threshold is achieved
Validation Results of Land ProductsAtmospherically corrected reflectance (RSRF)
SGLI Atmospherically corrected reflectance (RSRF)
May 01-31, 2018(BRDF corrected monthly average)
Geometric Errors in NDVI (L3Map) Period: from Jan. 1st 2018 to June 19th 2019
May 01-31, 2019
Validation Method:- Accuracy targets are defined as the relative error (RE) of “solar radiation on the ground”
derived from SGLI cloud products including CLFR (indirect validation). The REs are evaluated by comparing SGLI-derived solar radiation, which is monthly average for every 0.1 degree global grids, with in-situ measured solar radiation (monthly average).
Validation Data and Condition etc.:- Solar radiation was derived using SGLI cloud related products, i.e., cloud flag (CLFG), cloud
properties (CLPR), atmospherically corrected land surface reflectance (RSRF) , and ancillary data (meteorological data, elevation etc.).
- When comparing with in-situ data, only the data meeting the following conditions were used;- The time difference between SGLI and in-situ observation was less than 5 minutes.
Validation Period:- BSRN : Jul. 1st to Oct. 31st 2018 for 22 sites (4 months)- SKYNET : Jul. 1st to Oct. 31st 2018 for 3 domestic sites (4 months)
Validation Results of Atmosphere ProductsClassified Cloud Fraction (CLFR)
Validation Results:
Release threshold, Standard and Goal accuracies are achieved*(*Standard and Target accuracies of cloud flag/classification product are also achieved)
Monthly averageSupplemental: Non-monthly average (Daily)SGLI: 0.1 deg. Grid average vs. In-situ instantaneous values
Estimated errors Release threshold Standard accuracy Goal accuracy
10 % (as solar radiation) 20% (as solar radiation) 15% (as solar radiation) 10% (as solar radiation)
Validation Results of Atmosphere ProductsClassified Cloud Fraction (CLFR)
SGLI Cloud Fraction
May 01-31, 2019
Location of buoy data
Validation Method:- Overall RMS errors are evaluated comparing SGLI derived SST with those derived from
buoy measurements obtained from iQuam.
Validation Data and Condition etc.:- In-situ buoy data acquired within the spatial difference of 10 km and time difference of 2 hours from SGLI
observations were used for comparison. - In addition, before the comparison, the SGLI SSTs that meet the following conditions were selected;
1. Standard deviation of SGLI SST within 5 x 5 pixels around the buoy location is less than 1.0 ℃.2. The difference between maximum and minimum of SGLI SSTs within the 5x5 pixel box is less than 3.0 ℃.3. The difference between SGLI SST and iQuam SST is less than 5 ℃.
Validation Period:- Oct. 1st to 31st 2018
(1 month).
Validation Results of Ocean ProductsSea Surface Temperature (SST)
RMSE: 0.41℃ RMSE : 0.50℃
Daytime NighttimeValidation Results:
Estimated errors Release threshold Standard accuracy Goal accuracy0.4℃ (day)
0.5℃ (night) 0.8℃ (day) 0.8℃ 0.6℃
Release threshold, Standard and Goal accuracies are achieved
Validation Results of Ocean ProductsSea Surface Temperature (SST)
SGLI Sea Surface Temperature
May 01-31, 2019
deg.C
Validation Method:- Release threshold: Overall RMS errors are evaluated comparing SGLI derived SIST with those from
other satellite products.- Standard accuracy: RMS errors are evaluated comparing SGLI SIST with those from in-situ thermal
radiometer measurements on the ground.
Validation Data and Condition etc.:- Data source of other satellite: MODIS MOD11A1 IST products- Data source of in-situ data: In-situ measured thermal radiometer data installed at the PROMICE
Automatic Weather Stations (AWS) at Greenland. The in-situ data acquired at within the time difference of 30 minutes from SGLI observations are used.
Validation Period:- Jul. 1st to Sep. 30th 2018 (3 months)
Validation Results of Cryosphere ProductsSnow and Ice Surface Temperature (SIST)
Validation Results:
Estimated errors Release threshold Standard accuracy Goal accuracy
Other sat.: 2.6KIn-situ: 1.5K 5K (vs. other sat.) 2K (vs. in-situ) 1K (vs. in-situ)
[K]
MOD11A1
C2AB_SIST
RMSE = 2.6KBias = 0.25K
Release threshold and Standard accuracy are achieved
For the release threshold evaluation (vs. MODIS product)
For the standard accuracy evaluation(vs. AWS measurements)
別1 - 19
Validation Results of Cryosphere ProductsSnow and Ice Surface Temperature (SIST)
Snow surface temperature(Ver.1.001*)
Snow grain size of shallow layer(Ver.1.001*)
SGLI Snow Cover and Snow Physical Variable Products
Snow Cover Distribution(Ver. 1.001*)
Apr. 07-222018
Apr. 07-222018
Apr. 07-142018
*1 Symbols denote as follows; 〇: the release threshold achieved, ◎: the standard accuracy achieved, ☆: the goal accuracy achieved.
Summary of the Current Evaluation Status (1/2)La
nd
Surface reflectance
Precise geometric correction ◎ <1 pixel <0.5 pixel <0.25 pixel
Atmospheric corrected reflectance (incl. cloud detection) ○
0.3 (<=443nm), 0.2 (>443nm) (scene)
0.1 (<=443nm), 0.05 (>443nm) (scene)
0.05 (<=443nm), 0.025 (>443nm) (scene)
Vegetation and carbon
cycle
Vegetation index ○Grass:25% (scene), forest:20% (scene)
Grass:20% (scene), forest:15% (scene)
Grass:10% (scene), forest:10% (scene)
Above-ground biomass ○ Grass:50%, forest: 100% Grass:30%, forest:50% Grass:10%, forest:20%Vegetation roughness index ○ Grass & forest: 40% (scene) Grass & forest:20% (scene) Grass & forest:10% (scene)Shadow index ○ Grass & forest: 30% (scene) Grass & forest:20% (scene) Grass & forest:10% (scene)fAPAR ○ Grass:50%, forest: 50% Grass:30%, forest:20% Grass:20%, forest:10%Leaf area index ○ Grass:50%, forest: 50% Grass:30%, forest:30% Grass:20%, forest:20%
temperature Surface temperature ○ <3.0 K (scene) <2.5 K (scene) <1.5 K (scene)
Atm
osph
ere
Cloud
Cloud flag/Classification ☆ 10% (with whole-sky camera) Incl. below cloud amount Incl. below cloud amount
Classified cloud fraction ☆ 20% (on solar irradiance) 15% (on solar irradiance) 10% (on solar irradiance)Cloud top temp/height ◎ 1 K 3 K/2 km (top temp/height) 1.5 K/1 km (temp/height)
Water cloud OT/effective radius ○ 10%/30% (CloudOT/radius) 100% (as cloud liquid water) 50% / 20%
Ice cloud optical thickness ○ 30% 70% 20%
aerosol
Aerosol over the ocean ○ 0.1 (Monthly ta_670,865) 0.1 (scene ta_670,865) 0.05 (scene ta_670,865)Land aerosol by near ultra violet ○ 0.15 (Monthly ta_380) 0.15 (scene ta_380) 0.1 (scene ta_380 )Aerosol by Polarization ◎ 0.15 (Monthlyta_670,865) 0.15 (scene ta_670,865) 0.1 (scene ta_670,865)
Area Group Product Status*1 Release threshold Standard accuracy Goal accuracy
*1 Symbols denote as follows; 〇: the release threshold achieved, ◎: the standard accuracy achieved, ☆: the goal accuracy achieved.
Oce
an
Ocean color
Normalized water leaving radiance (incl. cloud detection) ◎ 60% (443~565nm)
50% (<600nm)0.5W/m2/str/um (>600nm)
30% (<600nm)0.25W/m2/str/um (>600nm)
Atmospheric correction parameters ○ 80% (AOT@865nm) 50% (AOT@865nm) 30% (AOT@865nm)Photosynthetically available radiation ◎ 20% (10km/month) 15% (10km/month) 10% (10km/month)
In-water
Chlorophyll-a concentration ○ -60~+150% (offshore) -60~+150% -35~+50% (offshore), -50~+100% (coast)
Suspended solid concentration ○ -60~+150% (offshore) -60~+150% -50~+100%
Colored dissolved organic matter ○ -60~+150% (offshore) -60~+150% -50~+100%
temperature Sea surface temperature ☆ 0.8 K (daytime) 0.8 K (day & night time)
0.6 K (day & night time)
Cryo
sphe
re Area/ distribution
Snow and Ice covered area (incl. cloud detection) ○ 10% (vicarious val with
other sat. data)7% 5%
Okhotsk sea-ice distribution ○ 10% 5% 3%
Surface properties
Snow and ice surface Temperature ◎5 K (vicarious val with other sat. data and climatology) 2 K 1 K
Snow grain size of shallow layer ○100% (vicarious val with climatology between temp-size) 50% 30%
Area Group Product Status*1 Release threshold Standard accuracy Goal accuracy
Summary of the Current Evaluation Status (2/2)
Summary• SGLI Level-2 (L2) products of Ver. 1 have been released to the public from “the G-Portal”
since Dec. 20, 2018.
• The release thresholds (the first accuracy target) of all the SGLI L2 standard products
have been achieved, which corresponds to achieving “the Minimum Success”.
• In addition, the evaluation results indicate that nine (and three) L2 products have
already reached the levels of the standard accuracy for “the Full Success” (and the goal
accuracy for “the Extra Success”) at this stage.
• A remaining issue to be solved in Ver. 1 is the occurrence of geometric errors in tile
products noticeable around Europe and Africa from Jan. 1st 2018 to June 19th 2019.
• SGLI L2 products updated to Ver. 2 will be available in June 2020 (1.5-yr interval).
*G-Portal : https://gportal.jaxa.jp/gpr/index/index
https://gportal.jaxa.jp/gpr/index/index
Users can search SGLI products with “physical variable” or
“satellite name”
Heavy users can download the data from FTP server directly.
G-Portal Standard products are downloadable at ”G-Portal”
Current satellite status and user handbooks are available at “Product Information and Operation status”