Portable LED Photo BoothGuide

2 GlowLightControl.com

Introduction

Thank you for selecting Glow for your photo lighting solution!

The Glow Portable LED Photo Booth simplified the daunting task of lighting a wide range of large products, apparel, and even people, on location or in the studio. The 6.5 X 4 X 2.75 foot lightweight aluminum frame chamber is lined with a neutral silvered, plasticized tough fabric, providing the maximum wrap-around lighting with the least amount of effort. The flexible and bright daylight balance (5500K) LED modular strip design can be configured to create flawless shadow-free images or more dramatic contrasts in lighting, simply with the flip of a switch. The use of the many lighting options with the integrated diffusers, background integration and baffles give endless possibilities for any level of user.

The Photo Booth materials are designed to be transportable, durable, and serve for years of photo sessions in and out of the studio. The frame sets up quickly, with easy break-down of all its components for storage in its own travel case and redeployment time and time again.

PRECAUTIONS• Please read and follow these instructions and keep this manual in a safe place.• Keep the Photo Booth away from water and any flammable gases or liquids.• Hand this unit with care in use and assemblage.• Use only the Glow parts supplied in the kit.• Make sure that the components are complete and that no parts are missing.• All images in this manual are for illustrative purposes only.• The LED strips can be warm to the touch when in use. Handle the LED bulbs with caution.

3 GlowLightControl.com

Nomenclature

SpecificationsPower input 100-250V 47-63Hz

Power adapter output 18V, 1.5A (2 lead)

Color Redering Index (CRI) 92+

Luminance 13,000 Ix

Color temperature 5500 K

LED count 480 diodes

Dimensions (H x W x D) 79.5 x 49.5 x 32.5 in. / 202 x 126 x 83 cm

Total Weight 17.5 lbs. / 8 kg

CONNECTORS, CLIPS & JOINTS1

2

3

Corner rod connector bracket ( x 8)

Background Clips ( x 2)

LED Fixture Clip (x16)1 32

LIGHTS & POWER1

2 6

1 LED array strip (x8)

2 Locking power connector

3 AC leads

4 Power adapter (x4)

5 Power switch

6 Locking female connectors

54

3

4 GlowLightControl.com

Nomenclature

OUTER SHELL

INCLUDED ACCESSORIES

1 Top LED Diffuser Panel

2 Top Section

3 Back Section

4 Zipper Closures

5 Bottom Panel

6 Side Panels

7 Power Supply Lead Holes

8 Side LED Diffusers Panels

9 Bottom Exterior Flap

1 White vinyl background

2 Travel and Storage case

21

5

44

66

7 7

8

9

2

3

1

5 GlowLightControl.com

Assembly Diagram

D

HH

D

D

H

H

D

W

W

W

W

6 GlowLightControl.com

Instructions

Assembling the Tubular Frame and Booth Shell Refer to the frame assembly diagram while following these steps.

1. First, assemble the base of the frame, with the shorter “D” and longer “W” tubes fitting in the Corner Rod Connector Bracket to attach the rods. The final base forms a rectangle.

2. Slip and lock the 1 2 section “H” (height) rods together to create four 6.5’ long poles. The spring loaded pins fit into the holes of the receiving end and lock automati-cally. Insert the finished poles into the 4 corner brackets of the base.

3. Attach the 2 four remaining Corner Rod Connectors to the tops of the 4 6.5’ pole rods you just added. Rotate them to mirror the position of the base rectangle form.

4. Insert the two remaining “W” and “D” rods into the top corner joints to form a perfect rectangular box with even and parallel sides. Be sure that all rods are assembled properly and inserted correctly. An irregular shape means that the rods are improperly constructed or fitted inaccurately.

5. Now that the frame is complete, it is time to clad the reflective skin around the structure. The outer skin is shaped to fit the frame. Position the frame exactly on the seams of the shell so that the panels match to the shape. Align the bottom of the shell to the bottom of the frame.

6. Find the zipper on the edge of the bottom rear panel and join the two sections 3 by closing the zipper along the frame rod length of the booth. Continue zippering until you reach the top of the box, curve over the top of the frame and forward to the front top of the enclosure.

7. Do the same procedure for the opposite side wall, closing up the long zipper to form the complete booth.

Getting Started• As the the outer shell is so large, the best way to construct the booth is to open the outer shell flat on

the floor, join the rods and then assemble the tubular frame on top of the shell.• The support column rods join and lock together with spring pins that fit neatly into its matching receiving

pole. They slip together and insert easily. Pressing the spring loaded pin down and insert that end past the mate opening with a hole to receive the pin. Do not use force when connecting them. Nice and easy does it! 1

1

2

3

7 GlowLightControl.com

InstructionsAttaching the LED PanelsThe 8 LED strips can be clipped onto any of the booth’s rods for the perfect custom lighting arrangement as your shoot requires.

To attach an LED strip to the booth, follow these steps:

1. Attach two LED clips about one third from the ends of the flat (non bulb) side of an LED strip.

2. Snap the LED strip to the frame by pressing the clip onto the rod until it is firmly in place. Slide the LED array panel on the rod to any desired position. 5

3. Run the LED strip’s power cord through the nearest opening on the side of the booth. 6

4. Each Power Adapter has leads to connect to 2 LED Arrays. Plug the mating LED Array power cord end into one of the power adapter’s locking connectors, and twist to lock the pieces firmly together. The power adapter may rest on the outside surface of the booth. 7

5. Connect every power adapter to an AC wall outlet. Switch on each adapter to illuminate the LED arrays, as you chose. For convenience, plug all the power adapters into power strips to control them simultaneously.

Diffusers and Light ControlThe light quality emanating from the LED bulbs can be modified to be more diffuse and shadow-free. The top and side panels have integrated diffusers along the length of the box that can cover the LED strips for a softer and less glaring light output.Use the Velcro tabs on the diffuser material to cover the LEDs as you wish.

Attaching the Background1 A background can be attached, with the background clips, to the top-back

wide rod. Use the 4 clips to hold the background securely in place. 8

2. The front end of the background can be tucked into the bottom-front interior flap.

5

6

7

8

8 GlowLightControl.com

GLOW TWO YEAR LIMITED WARRANTY

Glow warrants to the original purchaser that your Glow product shall be free from defects in material and workmanship for the period of two (2) years from the date of purchase (or delivery as may be required in certain jurisdictions), or thirty (30) days after replacement, whichever comes later.

Glow’s entire liability and your exclusive remedy for any breach of warranty shall be, at Glow’s option, to repair or replace the hardware, provided that the hardware is returned to the point of purchase or such other place as Glow may direct with a copy of the sales receipt or dated itemized receipt. Glow may, at its option, replace your product, offer to provide a functionally equivalent product, or repair any product with new, refurbished or used parts as long as such parts are in compliance with the product’s technical specifications. Any replacement hardware product will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer, or for any additional period of time that may be applicable in your jurisdiction. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover problems or damage resulting from accident, abuse, misapplication, or any unauthorized repair, modification or disassembly, improper operation or maintenance, normal wear and tear, or usage not in accordance with product instructions or connection to improper voltage supply, use of consumables, such as replacement batteries, not supplied by Glow, except where such restriction is prohibited by applicable law. Except where prohibited by applicable law, this warranty is nontransferable and is limited to the original purchaser and the country in which the product was purchased. This warranty gives you specific legal rights, and you may also have other rights, including a longer warranty duration that may vary under local laws.

To start a warranty claim contact the Glow Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Glow, along with the RMA number and proof of purchase.

Question about our product line? Need Product Support?We are proud of our products and celebrate our customers. We are with you, from productselection to everyday use. Be secure with your purchase and reach us as you need.Email us: brands@adorama.com, Call: 212-647-9300Address: Adorama Brands, 42 West 18th Street, New York, NY 10011

You can always contact us at BRANDS@ADORAMA.COM for personal technical support. Our web site contains a wide range of Support and FAQ pages with valuable technical assistance.

GLOW is a registered trademark of ADORAMA CAMERA. © 2017 Adorama Camera, Corp. All Rights Reserved.