PORTABLE GAS DETECTORS...Tru Pointe IR Description du produit The Tru Pointe IR is a refrigerant gas leak detector that uses a long-life infrared sensor in a housing to effectively

Visit our websites: www.gazdetect.com Online store: www.safetygas.com▸

P O R T A B L E G A S D E T E C T O R S

2 0 2 0

https://en.gazdetect.com/

https://en.safetygas.com/

2

Table of contents

Services ....................................................................................................................................................................................................... 4

� Portable gas detectorsGas detector Watchgas PDM ....................................................................................................................................................... 8Gas detector Pac 6000 ..................................................................................................................................................................... 9Gas detector T40 ................................................................................................................................................................................ 10Gas detector Pac 6500 .................................................................................................................................................................. 11Gas detector Tango TX1 .............................................................................................................................................................. 12Gas detector GasBadge PRO .................................................................................................................................................... 13Gas detector Pac 8000 ................................................................................................................................................................... 14Gas detector Pac 8000 OV .......................................................................................................................................................... 15Gas detector iGas CO2 ................................................................................................................................................................... 16Gas detector X-am EXPLO .......................................................................................................................................................... 17Gas detector X-am 5100 ............................................................................................................................................................. 18Gas detector X-act 7000 ............................................................................................................................................................. 19Gas detector Tru Pointe IR ......................................................................................................................................................... 20Gas detector PGM-IR ..................................................................................................................................................................... 21

� Portable multi gas detectors

Gas detector X-am 2500 ............................................................................................................................................................. 24Gas detector Ventis MX4 ............................................................................................................................................................ 25Gas detector X-am 5000 ............................................................................................................................................................. 26Gas detector X-am 5600 ............................................................................................................................................................ 28Gas detector Ventis Pro ............................................................................................................................................................... 30Gas detector X-am 8000 ............................................................................................................................................................. 32Gas detector MX6 iBrid ................................................................................................................................................................ 34Gas detector X-PID 9500.............................................................................................................................................................. 36Gas detector Blackline G7c ........................................................................................................................................................ 38

� Portable area gas monitor

Area gas monitor BM25 ............................................................................................................................................................... 42Area gas monitor X-zone 5500 ............................................................................................................................................... 44Area gas monitor Radius BZ1 .................................................................................................................................................. 46Area gas monitor G7 EXO ........................................................................................................................................................... 48

� Breathalyzers and drug testsBreathalyzer Dräger Alcotest 3820 ..................................................................................................................................... 52Breathalyzer Dräger Alcotest 5820 ..................................................................................................................................... 53Breathalyzer Dräger Alcotest 5000 ..................................................................................................................................... 54Drug test Dräger Drugcheck 3000 ..................................................................................................................................... 55

3

Gas Detection Because regular inspection and maintenance of gas detectors guarantees people and property's

safety, we offer different levels of preventive maintenance orcurative sercices on site (in France and in Europe) or at our workshop laboratory in Ile-de-France.

� Control and periodical checkings

Our team of trained and qualified technicians offers inspection and calibration services on site or in our workshop laboratory for a very wide range of fixed or portable gas detectors.

A very large stock of spare parts (gas detection sensors, batteries, shells, etc.) allows us to offer high quality services in a very short time.

With our wide range of standard gas cylinders, in most cases we ca-librate detectors with the target gas for better measurement accuracy.

After each checking, a calibration certificate is provided confirming proper operating conditions of the gas detector or the gas detection system.

� On site maintenance or workshop return

Relying on several years of expertise and collaboration with the biggest brands in the field (Dräger, Honeywell, Industrial Scientific, Oldham or Scott Safety), guaranteeing quality and compliance with standards, we have the necessary stocks to be very efficient in short response time.

In addition to one-off services (calibration, configuration, repair, etc.), we offer various maintenance contracts, whether or not including spare parts.

Phone +33 (0)1 64 09 35 16 • Fax +33 (0)1 60 66 15 [email protected]

GazDetect : ZAE • 3, rue des Fossés77240 VERT-SAINT-DENIS (France)

Non contractual document. Any reproduction, even partial, is prohibited without prior agreement. © GazDetect.

4

Tailored services to each needBecause each client is unique, we offer a complete range of adapted services

in each particular case. From a simple workshop return to on site services, we control and maintain your gas detectors and respiratory protective devices.

� The included maintenance concept

The Included Maintenance solution is a simple and eco-nomical concept which consists of providing periodic control of portable gas detectors or respiratory protection equipment for one or more years.

This service includes checking that the device is working properly, calibration or bench testing, provision of a test certificate and even the return transport fee.

� MyGazDetect : simplified PPE management

MyGazDetect - GazDetect's intranet network - is a simple, innovative application, completely free and available from any computer, tablet, or smart-phone for the management and monitoring of periodic PPE checkings (gas detectors and / or respiratory protection equipment). This application is designed to meet the expectations of HSE managers.

It allows you to view up-to-date devices and those requiring periodical control in three clicks. The very user-friendly interface allows you to assign one device to different users and thus easily know and manage your PPE fleet.

� Interventions and on site service

Our care and maintenance solutions are available on your premises. GazDetect technicians work on site throughout France. We install your fixed gas detection systems, perio-dically check and calibrate these devices. We also inflate compressed air cylinders using our mobile compressor, and provide on site gas masks inspection.

Safety is everyone's concern, it's also our job!




5

▸


6

https://www.linkedin.com/company/11001055/

https://www.youtube.com/channel/UCedFYKYkb0s35rTQm141jMg

https://www.facebook.com/gazdetect/

https://en.gazdetect.com/blog/



https://en.gazfinder.com/



Portable gas detectors


7





Visit our websites:www.gazdetect.com

Online store: www.safetygas.com


2 year disposable single gas detector (CO, H2, H2S, NH3, SO2 or O2)WatchGas PDM

Product description

� 2 year continuous runtimeThe WatchGas PDM is very easy-to-use. Once powered, the device automatically activates and requires no setup. This way, it can be used continuously during two years without any maintenance.

� High performance in a small housingThanks to its small size and its crocodile clip, the WatchGas PDM can be worn on the belt or directly on a collar without disturbing its user. This device is small, lightweight, ergonomically designed and waterproof (in compliance with the IP67 standard).

� Great ease of useThe large LCD display clearly indicates gas concentration. Thanks to a powerful backlit display, any information can be clearly read even in the darkest areas. The screen can display maximum concentration measured during the period. It is also possible to see recorded alarms even if they were already acknowledged.

� Convenient and user-friendlyaccessories

The WatchGas PDM features a large range of accessories including a 4 slots docking station and an IR Connect programmer. The portable WDS – WatchGas Docking Station – can simultaneously manage up to 4 detec-tors. The WDS can adjust alarm thresholds, perform bump tests, calibrate gas detectors and retrieve the last 30 alarm events.

The WIR – Watchgas IR – infrared module enables detector configuration (alarm thresholds) and data retrieving of the last 30 alarm events.

The WatchGas PDM disposable single gas detector continuously, accurately and reliably measures concentrations of CO, H2, H2S, NH3, SO2 or O2 even in the harshest conditions. Thanks to its rough design, sensor fast response time and powerful battery, it can safely monitor gases for up to two years without servicing.

Dimensions: 49 x 84 x 40 mmWeight: Toxic: 93 grams • Oxygen: 104 gramsOperating life: 24 months from start-upSensor technology: electrochimical sensorReading: measure display on LCD screenAlarms: visual, 95 dB audible and vibratingData logging: last 30 eventsBattery technology: DC 3.6V, 1.2Ah LithiumAir humidity: 5% ~ 95% RH (non-condensing)Case matérial: Polycarbonate and rubberIngress protection : IP67

Certifications :ATEX : II 1g Ex ia IIC T4CSA : C1, D1, Groups A, B, C, D, T4IECEx : Ex ia IIC T4 Ga

� Key points• Lightweight and compact• 2 year runtime, without maintenance and servicing• Data logging of last 30 events• Dust and water resistant (IP67)• Audiovisual and vibrating alarms

Technical specifications

Gas CodeMeasuring range

Alarm Threshold (A1/A2)

Ammonia 0 - 100 ppm NH3 10/20 ppm 71 81 415

Sulfur dioxide 0 -100 ppm SO2 0.5/1.0 ppm 71 81 414

Hydrogen 0 - 1000 ppm H2 50/100 ppm 71 81 416

Hydrogen sulfide 0 - 100 ppm H2S 5/10 ppm 71 81 413

Carbon monoxide 0 - 500 ppm CO 30/60 ppm 71 81 412

Oxygen 0 - 30 % vol. O2 19/23 % vol. 71 81 411

WatchGas Infrared module WIR 71 89 170

8








2 years disposable single-gas detector (CO, H2S, SO2 or O2)

Product description

The Pac® 6000 is a disposable single gas detection device with a 2 year lifetime that warns against hazardous concentrations of carbon monoxide (CO), hydrogen sulfide (H2S), sulfur dioxide (SO2) or oxygen (O2) with precision.

A « D-Light » LED indicates if the device has been tested and is ready to use. The Pac® 6000 housing is also designed to ensure safety: each sensor variant features a clearly visible color coding, thereby minimizing the chance of mistakes.

A membrane filter protects the sensor from foreign matter such as dust and liquids. The shock-proof & chemical resistant housing meets the requirements specified by the IP68 standard. The Pac® 6000 is protected against water, dust and other foreign bodies by a special membrane filter.

� Clear and precises indicationsThe large display clearly indicates the respective gas concen-trations. Other important information, such as remaining operating time and battery capacity, is also displayed. The bright backlighting ensures clear reading of all values in the dark. The display can show peak concentration measured at any given moment. Previous alarm events can also be retrieved at a later time from the device’s internal memory, even if acknowledged.

If the Pac® 6000 detects hazardous gas concentrations, it sets off an audible, visual, and efficient vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides. The acoustic alarm reaches a volume of 90 dB.

� Lifetime : 2 yearsNeither the sensor nor the battery need to be changed for the entire two-year maintenance-free service life of the H2S, SO2 and CO versions of the device. The service life of the Pac® 6000 starts when it is first activated. The device automati-cally switches off after two years.

The Pac® 6000 equipped with an oxygen sensor has two additional alarm thresholds (in addition to the standard alarm threshold setting) and needs a battery replacement after one year (minimum).

The Pac® 6000 disposable personal gas detector monitors CO, H2S, SO2 or O2 concentrations reliably and precisely, even in the toughest conditions. The robust design, quick sensor response times, and a powerful battery ensure maximum safety for up to two years with virtually no required maintenance.

Dimensions without clip (W x H x D): 64 x 84 x 20 mm Weight: Approx. 106 g (113 g with clip)

Device service life: 2 years from first activationBattery service life: 2 years (O2 minimum 12 months)

Degree of protection: IP68 Air humidity: 10 to 90% relative humidity, non-condensing Temperature: -30 °C to +55 °C (briefly down to -40 °C for 1 hour, depending on sensor)

Certifications: cCSAus, IECEx, ATEX, CE


Pac® 6000

Gas Measuring range

Alarm thresholds (A1 / A2) Ref.

Hydrogen sulfide 0 - 100 ppm H2S 5 / 10 ppm 83 26 320

Carbon monoxide 0 - 2000 ppm CO 30 / 60 ppm 83 26 321

Oxygen 0 - 25% vol. O2 19 / 23% vol. 83 26 322

Sulfur dioxide 0 - 100 ppm SO2 0.5 / 1.0 ppm 83 26 323

9








CO or H2S ATEX single gas detector

Product description

The T40 Rattler is an ATEX single gas detector with an electro-chemical sensor dedicated to carbon monoxide (CO) or hydrogen sulfide (H2S) monitoring.

With a large LCD screen permanently displaying measurements and alarm thresholds, this device is cost efficient and has a 2 year warranty.

� Audible, visual and vibrating alarmIn presence of dangerous gas concentrations, the T40 Rattler triggers an audible, visual and vibrating alarm.

The audible signal has a 90dB intensity and can alert the user of the device in loud environments.

� Important information friendly displayA large screen without text clearly indicates the gas concentration. Other essential information, like the battery charge also appear.

Thanks to a powerful backlight all the indications are readable in the dark. The device also has a peak value function that displays the highest measurement for one work shift.

� Provided with the deviceThe T40 Rattler is delivered with on LR06 pre-installed battery, one replacement battery, a belt clip, a bump test kit, a multi-lingual user manual and a calibration certificate.

� Main assets: • Lightweight, compact & robust device• Works with simple LR06 alkaline battery • Not subject to air transportation regulations • Audible, light and vibrating alarm • 1500 hours autonomy with 1 LR06 battery• Excellent price-quality ratio

18 106 47 T40 Rattler - Hydrogen sulfide (H2S)

18 106 54 T40 Rattler - Carbon monoxide (CO)

Sensor: Electrochemical sensor (CO or H2S)Measurement scale:• CO: 0-999 ppm in 1 ppm increments• H2S: 0-500 ppm in 1 ppm increments

Alarms:• 2 configurable alarm threshold• Highest measured value recorded• Alarm indicators: sound, light, vibrationBattery:• 1 LR06 AA alkaline battery (2 batteries provided)• Battery life: approx. 1500 hoursCasing: • High resistance composite housing• RFI protection• Dimensions: 86 x 58 x 19 mm / Weight: 98 grams

Certifications:• UL & cUL: Class I, Group A, B, C, D • CSA: Class I, Group A, B, C, D • ATEX: EEx ia IIC T4; Group and equipment category II 2G II 2G • IECEx: Ex ia IIC T4 ANZEx: Ex ia IIC T4


T40

Ref. Description

Codification

10








CO, H2S, SO2 or O2 single gas detector

Product description

� Maximum efficiency and safetyPac® 6500 can easily handle even extreme conditions. Depending on the sensor, temperatures from -40°C to 55°C can be tolerated..

A membrane filter protects the sensor from foreign matter such as dust and liquids. Its shock-proof, chemical-resistant housing meets the requirements specified in the IP68 standard rating.

� Easy handling thanks to clear user guidanceThe D-Light LED indicates wether if the device is properly working and whether it is ready to use.

The Pac® 6500 housing is also designed for maximum safety: each sensor variant features clearly visible colour coding, thereby minimising the chance of mistakes.

� User-friendly display with all important informationThe large display is word-free and clearly indicates the respective gas concentration. Other important information, such as the battery capacity, is also displayed. The bright backlighting ensures that all values are clearly legible in the dark.

� Audible, visual and vibrating alarm If the Pac® 6500 measures hazardous gas concentrations, it sets off an audible, visual and perceptible vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides.

The acoustic signal reaches a volume of 90 dB. The display can show the peak concentration measured at any given moment. Earlier alarms registered can also be retrieved at a later time even if they have been acknowledged.

� Water- and dust-resistantThe Pac® 6500 is protected against water, dust and other foreign bodies by a special membrane filter.

When the filter becomes heavily soiled in use, user can quickly and easily replace it. The device is then ready to use again right away.

� Data logger and event logger The Pac® 6500 logs concentrations and events along with the date and time. The data can be loaded on a PC via an interface and processed further there.

Pac® 6500 single gas detectorPac® 6500 personal single gas detector quickly and accura-tely measures concentrations of CO (carbon monoxide) or H2S (hydrogen sulfide) or SO2 (sulfur dioxide) or enven O2 (oxygen deficiency). Quick sensor response times and a powerful battery also ensure safety.

Dimensions without clip (Wl x H x D): 64 x 84 x 20 mm Weight: Approx. 106 g (113 g with clip)

Battery service life: • 2 years for CO, H2S or SO2• > 10 months for O2 sensor Protection class: IP68 Air pressure: from 700 to 1 300 hPa Air humidity: from 10 to 90 % relative humidity, non-condensing

Temperature: -30 °C to +55 °C Approvals: cCSAus, IECEx, ATEX, CE


Pac® 6500

Gas Measuring range

Alarm thresholds(A1 / A2)

Ref.

Hydrogen sulfide 0 - 100 ppm 5 / 10 ppm 83 26 331

Carbon monoxide 0 - 2000 ppm 30 / 60 ppm 83 26 330

Oxygen 0 - 25 % vol. O2 19 / 23 % vol. 83 26 332

Sulfur dioxide 0 - 100 ppm 0.5 / 1.0 ppm 83 26 333

11








Single gas monitor using two sensors to detect the same gas.

Product description

By wearing the TangoTX1 with the DualSense Technology, workers will be the safest single gas monitor users in the world.

The Tango incorporates the revolutionary patent pending DualSense Technology which includes two of the same type sensor for the etection of a single gas. The two-sensor readings are done through a proprietary algorithm and displayed as a single reading to the user.

The DualSense Technology was developed to address the major challenge of making sure workers are always using fully functioning, reliable instruments in the field. Until the develop-pement of the Tango, that required a bump test of the instrument before each day’s use.

Tht DualSense Technology ensures that regardless of your current bump test policy, you will be significantly safer with the Tango than with any other single gas instrument on the market today.

For higher-noise environments, the Tango ’s alarm volume, usualy 100dB at 10 cm, can be increased nearly by 10dB with the addition of the optional patent pending AlarmAmp™. The Tango’s alarm is louder than any other single gas instrument on the market.

Alarms : Three strobe-emitting visual alarm LEDs (two red; oneblue);100 decibel (dB) audible alarm at a distance of 10 cm(3.94"); Vibration alarm

Dimensions : 99 x 51 x 35 mm (3.9" x 2.0" x 1.4")

Temperature range:-40°C to +50°C (-40°F to +122°F)

Humidity Range:15%-95% Non-condensing (continuous)

Ingress Protection: IP66; IP67

Sensors:CO, H2S, NO2, SO2 - Electrochemical sensor technology

Sensor Measuring Ranges:• Carbon Monoxide (CO): 0.0 to 1,000 ppm in 1 ppm increments• Hydrogen Sulfide (H2S): 0.0 to 200.0 ppm in 0.1 ppm increments• Nitrogen Dioxide (NO2): 0.0 to 150.0 ppm in 0.1 ppm increments• Sulfur Dioxide (SO2): 0.0 to 150.0 ppm in 0.1 ppm increments


Tango TX1

Device configuration

TX1-1 Tango TX1, CO

TX1-2 Tango TX1, H2S

TX1-4 Tango TX1, NO2

TX1-5 Tango TX1, SO2

Accessories

17 154 367 Replacement battery

18 109 171 Soft nylon case, Black

18 109 239 Soft nylon case, Orange

18 109 218 Dust barrier kit, 5 pack

18 109 230 Water barrier kit, 5 pack

17 120 908 Belt clip

17 154 915 AlarmAmp™

17 154 916 Black nameplate

17 154 917 Green nameplate

17 154 918 Yellow nameplate

17 154 919 Blue nameplate

17 154 920 White nameplate

Réf. Description

12








Portable gas detector Cl2, ClO2, CO, H2, H2S, HCN, NH3, NO2, O2, PH3 or SO2GasBadge Pro

Product description

GasBadge® Pro portable gas detector for CL2 (Chlorine), ClO2 (Chlorine dioxide), CO (Carbon dioxide), H2 (hydrogen), H2S (Hydrogen sulphide), HCN (Hydrogen cyanide), NH3 (ammonia), NO2 (Nitrogen dioxide), O2 (Oxygen), PH3 (Phosphine) or SO2 (Sulphur dioxide) monitoring.

� Interchangeable « Smart » SensorsBuilt to the highest quality and reliability standards the device provides a lifetime of gas hazard protection with more features than any other single gas monitor available.The GasBadge® Pro, single gas detector, is the most flexible and complete gas detector of its generation. Equipped with interchan-geable smart sensors, it is very simple to change the monitored gas and turn an oxygen gas detector into a toxic gas detector, for example.

� Rugged and Waterproof caseProtected by a robust case, the GasBadge® Pro is waterproof and immune to radio-electric interference. A protective concus-sion-proof overmold protects the unit from extreme use in a variety of harsh industrial environments. Its simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

� Chronological DataloggingThe GasBadge® Pro has 4 alarms, 2 customized instant alarms (AL1 & AL2), standard STEL and TWA readings, and datalogging. It stores up to one year of data and features an event-logger that records the past 15 alarm events.

Interchangeable « Smart » Sensors:Cl2 - ClO2 - CO - H2 - H2S - HCN - NH3 - NO2 - O2 - PH3 - SO2 Display:• Customized LCD display with graphical icons for easy use• Direct instant display of the value• Segmented display for direct reading of gas value under low lighting conditionsAlarms:• High alarm and low alarm selected by the user• Sound alarm (95 dB), visual ultra-bright LED and vibrating alarm

Event-Logger:• Continually on. Logs last 15 alarm events, stamping how long ago the event occurred, the duration of the event, and the peak reading seen during the event• Data logs can be viewed on PC Case:• Rugged, water-resistant polycarbonate shell with protective shockproof overmold• Radio-electric interference resistant

Battery: User replaceable 3V CR2 lithium batteryRuntine: 2 600 hours runtime (minimum) Dimensions: 9,4 cm x 5,08 cm x 2,79 cmWeight: 85g IP rating: IP67

Certifications:• UL - Class I, Div. I, Groups A, B, C, D; T4• CSA - Class I, Div. I, Groups A, B, C, D; T4• Cenelec (ATEX) - EEx ia d IIC T4


Codification

Ammonia 0-500 ppm NH3 1 ppm 18100060-6

Chlorine 0-100 ppm Cl2 0,1 ppm 18100060-7

Hydrogen cyanide 0-30 ppm HCN 0,1 ppm 18100060-B

Nitric dioxide 0-150 ppm NO2 0,1 ppm 18100060-4

Chlorine dioxide 0-1 ppm COCL2 0,01 ppm 18100060-8

Sulfur dioxide 0-150 ppm SO2 0,1 ppm 18100060-5

Hydrogen 0-2000 ppm H2 1 ppm 18100060-C

Hydrogen sulfide 0-500 ppm H2S 0,1 ppm 18100060-2

Carbon monoxide 0-1500 ppm CO 1 ppm 18100060-1

Oxygen 0-30%/vol, O2 0,1 %/vol 18100060-3

Phosphine 0-10 ppm PH3 0,01 ppm 18100060-9

Data extraction system (Datalink) 18106260

Gas Measure range Incrément Code

13








Portable single-gas detector Cl2, CO2, COCl2, HCN, NH3, NO, NO2, O3 or PH3

Product Description

� Sensors for special gasesThe Pac® 8000 performs especially well when detecting a variety of special gases: it can detect ozone (O3) from concentrations as low as 0.02 ppm and phosgene (COCl2) starting at 0.01 ppm. It can also be equipped with sensors for ammonia (NH3), chlorine gas (Cl2), hydrogen cyanide (HCN), carbon dioxide (CO2), nitrogen monoxide (NO), nitrogen dioxide (NO2), phosphine (PH3) and organic vapors (OV or OV-A). Its powerful sensors with a low T-90 response time ensure quick reactions.

� Robust design – even for the toughest conditionsThe Pac® 8000 can easily handle diverse and even extreme condi-tions. The sensors can tolerate air pressures between 700 and 1,300 mbar. The shock-proof, chemical-resistant housing meets the requirements specified by the IP68 standard.

The Pac® 8000 is protected against water, dust and other foreign bodies by a special membrane filter. When the filter becomes heavily soiled, it can be quickly and easily replaced.

� Easy handling thanks to clear user guidanceThe D-Light indicates if the device has been tested and that it is ready to use. The large display clearly indicates the respective gas concentrations. Other important information, such as the unit of concentration and battery capacity, are also displayed. The bright backlighting ensures that all values can be clearly read in the dark.

� 360° alarm with various functionsIf the Pac® 8000 detector detects hazardous gas concentrations, it triggers an audible, visual and noticeable vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides. The acoustic signal reaches a volume of 90 dB.

� Data recording for analysis and reportsPac® 8000 logs concentration levels and alarm events with their date and time. The data can be transferred to a PC via an interface and processed further (even if the events have already been acknowledged).

Dimensions without clip (W x H x D): 64 x 84 x 20 mm Weight: Approx. 106 g (113 g with clip)

Battery service life: 2 yearsProtection class: IP68

Air pressure: 700 to 1,300 hPaAir humidity: 10 to 90% relative humidity, non-condensing

Temperature : -30 °C to +55 °C Certifications: cCSAus, IECEx, ATEX, CE


Pac® 8000

Gaz Plage de mesure

Seuils d'alarme (A1 / A2) Ref.

Ammonia 0-300 ppm NH3 20 / 40 ppm 83 26 354

Chlorine 0-20 ppm Cl2 0.5 / 1 ppm 83 26 352

Hydrogene cyanide 0-50 ppm HCN 1.9 / 3.8 ppm 83 26 353

Nitrogen dioxide 0-50 ppm NO2 0.5 / 1.0 ppm 83 26 358

Carbon dioxide 0-50 vol.% CO2 0.5 / 1vol.% 83 26 351

Nitric Oxide 0-50 ppm NO 25 / 50 ppm 83 26 350

Ozone 0-10 ppm O3 0.1 / 0.2 ppm 83 26 359

Phosgene 0-10 ppm COCL2 0.1 / 0.2 ppm 83 26 360

Phosphine 0-20 ppm PH3 0.1 / 0.2 ppm 83 26 355

Organic vapor 0-200 ppm OV 10 / 20 ppm 83 26 356

Organic vapor 0-200 ppm OV-A 10 / 20 ppm 83 26 357

14








Gas and organic vapors detector

Product description

The Pac 8000 OV is particularly well-suited to detect leakages of many gases and organic vapors. Even if it does not detect as many gases as a PID sensor, its keypoint is its totale immunity to humidity.

Featuring the same specifications than the Pac 8000 detector, it can handle the harshest conditions and its IP68 housing is resistant to shocks and chemical products. Thanks to a special membrane filter, it is protected against water and dust. The large display is word-free and clearly indicates the respective gas concentration, measuring unit and battery status.

Dimensions(W x H x D)/Weight: 64 x 84 x 20 mm/Approx. 106 g Battery service life: 2 years Approvals: cCSAus, IECEx, ATEX, CE

Pac 8000 OV

Acethylene (ethene) C2H2 74-86-2 OV-A 1 ppm 0-100 ppm

Vinyl acetate C4H6O2 108-05-4 OV-A 1 ppm 0-100 ppm

Acrylonitrile (nitrile acrylique) C3H3N 107-13-1 OV-A 1 ppm 0-200 ppm

Butadiene C4H6 106-99-0 OV 1 ppm 0-100 ppm

Vinyl chloride C2H3Cl 75-01-4 OV 0.5 ppm 0-100 ppm

Ethanol C2H6O 64-17-5 OV-A 2 ppm 0-300 ppm

Ethyl ether C4H10O 60-29-7 OV-A 1 ppm 0-200 ppm

Ethylene C2H4 74-85-1 OV 0.5 ppm 0-100 ppm

Epichlorhydrine (1-chloro-2,3 époxypropane) C3H5ClO 79-03-8 OV 1 ppm 0-100 ppm

Formaldehyde CH2O 50-00-0 OV 2 ppm 0-100 ppm

Isobutene C4H8 115-11-7 OV-A 2 ppm 0-300 ppm

Isopropanol C3H8O 67-63-0 OV 2 ppm 0-300 ppm

Methanol CH4O 67-56-1 OV 0.5 ppm 0-200 ppm

Methyl methacrylate C5H8O2 80-62-6 OV 1 ppm 0-100 ppm

Ethylene oxide C2H4O 75-21-8 OV / OV-A 1 ppm 0-200 ppm

Propylene oxide C3H6O 75-56-9 OV 0.5 ppm 0-200 ppm

Propylene (propene) C3H6 115-07-1 OV 2 ppm 0-100 ppm

Styrne C8H8 100-42-5 OV 1 ppm 0-100 ppm

Tetra-hydrofurane C4H8O 109-99-9 OV 1 ppm 0-200 ppm

Gas Formula CAS Sensor type Detection limit Measuring range

15








Portable CO2 gas detectoriGas CO2

Product descriptionEquipped with an infrared sensor (NDIR), the iGas is a reduced size, light and easy to use portable CO2 detector. Its large graphi-cal liquid crystal display clearly shows the concentration of carbon dioxide in the air.

With an excellent quality / price ratio, It is particularly suitable in the food industry, wine-making or maturing cellars, industrial breweries, agro-food storage and all applications requiring CO2 level in ambiant air monitoring.

� The dangers of carbon dioxide

Present naturally at low doses in the atmos-phere, carbon dioxide remains a latent risk in all industrial, tertiary and confined envi-ronments.

Colorless, odorless and heavier than the oxygen it takes up, it accumulates in poorly ventilated spaces and confined spaces such as tunnels, crawl spaces or tanks. In winemaking this is a major danger, during the alcoholic fermentation of the must, one liter of wine produces 44 liters of CO2!

Non-toxic and non-flammable, the main risk associated with the presence of carbon dioxide is asphyxiation. It thus replaces oxygen in the blood, causing unconsciousness and then death if nothing is done (installation of ventilation, danger zone evacuation, etc.).

� The iGas CO2 detector assets

Designed for individual monitoring in an industrial environment, the iGas portable CO2 detector is a flexible and easy-to-use device, very compact and weighing less than 100 grams.• Very precise non-dispersive infrared technology (NDIR)• Average lifespan greater than 5 years• Very long autonomy (more than 7 days)• Permanent display of the CO2 content• Water and dust resistant• Data logger function• Excellent value

� The iGas CO2 detector application fields

• Wine making sector (wine cellars, cellars)• Maturing cellars (industrial cheese dairies)• Industrial breweries and barrel storage• Agrifood industries • Food or sports cryogenics• Agronomic sector (greenhouses, mushroom houses)• Air quality analysis (schools, ERP, etc.)• Confined or poorly ventilated spaces

Function: Portable CO2 detector diffusion modeSensor type: Non-dispersive infrared sensor (NDIR)Average sensor lifespan: > 5 yearsMeasure range: 0 - 5%/vol.Resolution: 0.1% / vol.Display:• Large LCD display• Real-time concentration• Battery life display

Alarms:• Sound: 90 dB buzzer• Visual: red LED flashing• Alarm level selectable via PC software

PC software:• Communication by mini USB cable• Device configuration and setting• Display of the latest alarm events

Power supply: Li-ion batteryAutonomy: > 7 days fully chargedCharger: Mini USB type

Housing: Polycarbonate and rubberProtection index: IP66 / 67Dimensions (H x W x D): 91 x 54 x 22 mmWeight: 93 gramsOperation:• Temperature: -20 to +50 ° C• Humidity: 5 to 95% RH (non-condensing)

2 years warranty


16








ATEX detector for combustible gas monitoring

Product description

The X-am EXPLO has ATEX approval for zone 0 and therefore offers very high safety in areas subject to explosion hazards. The innovative Ex catalytic sensor impresses with its excellent poison resistance from silicone and hydrogen sulfide. Associated with a high drift stability, this allows the sensor to benefit from an excep-tional over 4 years lifespan.

Light and ergonomic, the X-am EXPLO is particularly ideal for industrial environments. The device is protected against water and dust in compliance with the IP 67 protection class, which allows it to preserve all of its functionality even after falling into water.

ATEX Xam EXPLO to detect combustible gases (natural gas, butane, propane, hydrocarbons, solvents, alcohols)Measuring range: 0 to 100 % LEL in 1 % incrementsOptional sensors: O2, CO or H2SAlarms: 360° ultra-bright indicators, 90 db sounder at 30cm, vibrating alarmDimensions (L x H x P): 48 x 130 x 44 mm / Weight: around 250 g Protection class: IP 67Datalogger: Data retrievable using an infrared interface > 1000h Battery life: 12 hours (with NiMH battery) Charging time 4 hours Electromagnetic interference/radio interferance Compliant with the 2004-108-CE electromagnetic compatibility directive Certifications: ATEX / IECEx, CSA (Canada & USA) & MED MarineEquipement Directive 96/98/CE – CE Marked Warranty: 3 years

� External sampling pump (optional)The external sampling pump with a hose is an ideal solution for remote sample measurements in tanks, in pits or to detect leaks.Dimensions: 67 x 175 x 38 mm (Without X-am®)Weight: Around 200 gOperating temperature: -20 °C to 50 °C Maximum sampling lenght: 45 m Charging time: < 6 hoursAutonomy: up to 8 hours, depending on the type of use Air flow: 0.4 L/minProtection class: IP67 Certifications: ATEX / IECEx, CSA (Canada & USA) & DNV-GL


X-am® Explo

Acetone 2,5 % of volume

Acetylene 2,5 % of volume

Ammonia 15,0 % of volume

Benzene 1,2 % of volume

Butane 1,9% of volume

Butanol (Butyl alcohol) 1,4 % of volume

Diethyl ether 1,9 % of volume

Ethane 3,0 % of volume

Ethanol (Ethyl alcohol) 3,3 % of volume

Ethylene 2,7 % of volume

Hexane 1,1 % of volume

Hydrogen 4,0 % of volume

Isopropanol (Isopropylic alcohol) 2,0 % of volume

Methane 5,0 % of volume

Methanol (Methyl alcohol) 6,0 % of volume

Methyl ethyl ketone 1,4 % of volume

Carbon monoxide 12,5 % of volume

n-Pentane 1,4 % of volume

Ethylene oxide 2,7 % of volume

Propane 2,1 % of volume

Propylene 2,0 % of volume

Styrene 0,9 % of volume

Toluene 1,1 % of volume

Xylene 1,1 % of volume

LEL: Lower Explosive Limit

17








Portable exotic gas detector (H2O2, HBr, HCl, HNO3, N2H4 or PCl3)

Product description

The Dräger X-am 5100 is designed to monitor hydrazine, hydrogen peroxide, hydrogen chloride and hydrogen fluoride gases and vapors.

Risks related to these gases are hard to detect as they are absorbed by different surfaces.

A special device designed with a direct gas entry point provides fast sensor response and precise measurements by preventing gas adsorption by the device’s housing. XS sensors provide fast response for these special gases.

The Dräger X-am 5100 can only be used in diffusion mode. H2O2 and N2H4 sensors have to get a minimum of one calibration per year.

For HCL sensors, a bump test must be performed before each use of the sensor. This calibration should be done with the reference gas (HCL) with concentration between 3 and 30 ppm or using one of the following target gases: NO3, HBr, POCl3,PCl3, HF. Because of the specificity of theses sensors and target gases, a minimum calibration is recommended every six months.

The Dräger X-am 5100 also features many accessories like a USB-IR wire for data transfer, a vehicle charger or communi-cation accessories…

H2O2 sensor measuring range: 0-20 ppmN2H4 sensor measuring range: 0-5.0 ppmH2O2 sensor measuring range/relative sensitivity (HCL):• 0 to 30 ppm HCL (hydrochloric acid) / 1.00• 0 to 30 ppm HNO3 (nitric acid) / 1.00• 0 to 30 ppm HBr (Hydrogen bromide) / 1.00• 0 to 30 ppm POCl3 (Phosphoryl chloride) / 1.00• 0 to 30 ppm PCl3 (Phosphorus trichloride) / 3.00• 0 to 30 ppm HF (Hydrogene fluoride) / 0.66

Detection limit: 1 ppmResolution: 0.1 ppmTemprature: –20 à +50 °CPressure: 700 à 1 300 mbarRelative Humidity: 10 à 95 % RHIngress protection: IP 54

Alarms:• Visual: 360°• Audible: Multi-tone alarm > 90 dB at 30 cm• Vibrating: yes

Power supply: Alkaline power pack, NiMH rechargeable alkaline batteries, T4 rechargeable batteriesBattery life: from 150 to 180 hoursCharging time: < 4 hoursCompatible sensors: XS H2O2, HS Hydrazine, XS HF/HCL sensorsOperating time: unlimitedData logger: Retrievable using an infrared interface > 1000 h at a recording interval of 1 value per minute.

Caractéristiques techniques

X-am® 5100

Certifications, dimensions & Weight

Certifications:

ATEX: IM1ExiaIMa II 1G Ex ia IIC T4/T3 GaIECEx: ExiaIMa Ex ia IIC T4/T3 Gac CSA us: Classe I, Div. 1, Groupes A, B, C, D TC T4/T3 Classe I, Zone 0, A/Ex ia IIC T4/T3 /Ga

CE mark: Electromagnetic compatibility (Guideline 2004/108/EC)

Dimensions (l x h x p): 47 x 129 x 55 mmWeight: 220 g

18








Opto-electronic ppb gas analyzerX-act® 7000

Product descriptionThe X-act® 7000 analysis system consists of Dräger micro-tubes combined to an opto-electronic analyzer which allows precise gas measurement at extremely low concentrations (in ppb).

Versatile and very easy to use, the device provides precise and fast results, and easily replaces costly laboratory tests.

� Analytical results worthy of laboratory testing

Hazardous substances in ambient workplace air are often expressed in very low concentrations and few devices on the mar-ket are able to monitor low concentration levels.

The X-act® 7000 analyzer focuses on toxic and / or carcinogenic substances measurements with a low ppb range, with analysis results worthy of laboratory and immediate tests.

Each micro-tube has an RFID tag with all calibration and confi-guration information on the substance to be analyzed. External parameters such as ambient temperature and humidity are taken into account during the factory calibration and pressure variations have no influence on the analysis because the X-act® 7000 ope-rates on the basis of mass flow measurement.

� Measurements selectivityThe capillary micro-tubes are made of several layers isolating the targeted substance, this way it blocks any interference and pre-vents from erroneous measurements.

� Great ease of useAfter an automatic self-test, the X-act® 7000 analysis system is immediately ready to use. The 2.4'' color screen and displayed messages allow easy operating of the device.

Analysis results are displayed on the screen and can be stored on the device along with the measurement's date, time and place for later evaluation.

� Diffusion mode or gas sampling pumpUsing a coupler (connection piece), the Dräger X-am® pump can be adapted to the X-act® 7000 to allow gas sampling up to 45 meters away.

This pump is particularly well suited for toxic and carcinogenic substances analysis in areas with difficult access like conduits, pipes or tanks.

� Explosion proof & water proof equipment The X-act® 7000 analysis system is explosion-proof and ATEX / IECEx certified for zone 0. The system is also resistant to dust and splashes in compliance with the IP54 standard.

It also meets the requirements for the electromagnetic compatibi-lity EN50270 standard.

Opto-electronic ppb gas analyzer: benzene, butadiene, formaldehyde, mercury or ethylene oxide.System diagnostics: Automatic using micro-controllers for all system componentsDisplay: 2.4 inch high contrast color screen with 240 x 320 resolution, 160 ° viewing angleTest time: From 5 seconds to 1,200 seconds, depending on the micro-tubes used and the measurement range of the substance.Operating temperature: 0 to +40 ° CHumidity: 0 to 95% relative humidity, non-condensingStorage temperature: -20 to +60 ° C (analyzer) +4 to +25 ° C (micro-tubes)Power: 5 x 1,5 v batteriesAutonomy: Env. Approx. 600 minutes of test timeDimensions (LxWx H): 195 x 85 x 70 mmCertifications: ATEX / IECEx II 1G Ex ia IIC T4 GaProtection: IP54Data logging: Measurements storage


Test rangeDescription Part numberTest time

Benzène 1 – 150 ppb 100 – 900 secondes 86 10 600

Benzène 0.15 – 10 ppm 25 – 150 secondes 86 10 030

1.3-Butadiène 25 – 500 ppb 150 – 550 secondes 86 10 460

1.3-Butadiène 0.5 – 25 ppm 30 – 100 secondes 86 10 300

Formaldéhyde 5 – 150 ppb 360 – 960 secondes 86 10 540

Formaldéhyde 0.15 – 3 ppm 300 – 600 secondes 86 10 100

Mercure 0.005 – 0.25 mg/ 240 – 1,200 secondes 86 10 350

Oxide Ethylène 25 – 250 ppb 200 – 500 secondes 86 10 580

Oxide Ethylène 0.25 – 10 ppm 50 – 200 secondes 86 10 200

19








Refrigerant leak detectorTru Pointe IR

Description du produitThe Tru Pointe IR is a refrigerant gas leak detector that uses a long-life infrared sensor in a housing to effectively locate refrige-rant gas leaks CFC, HFC, HCFC and HFO. Ready to use in 30 seconds and with an 8 hours autonomy on a single charge, the Tru Pointe IR is an essential tool in the search for freon gas leaks.The Tru Pointe IR has 3 adjustable sensitivity levels for finer research and a LED bar graph indicates the extent of the leak. Automatic zeroing function allows leak detection in already gas-polluted environments.With considerable autonomy, the Tru Pointe IR is ideally suited for the control of domestic, commercial and industrial refrigeration installations, as well as automotive air conditioning and air condi-tioning systems.The very complete kit includes the detector with a wall adapter and a vehicle charger, a 39.4 cm flexible probe, a 22 cm extension probe, a rigid "needle" probe, all in a carrying case.

� Main assets• Every refrigerants CFC, HFC, HCFC, including R12, R22, R134a, R404A, R410A, R502, R507, HFO1234yf & HFO1234ze• Advanced infrared technology with an average 10 years sensor life• Robust housing with rubberized protection and magnetic clip• Sensitivity levels for finer leak detection Visual alarm with color, sound and vibrating bargraph for noisy environments• Less than 1 second response time• Auto-calibration in contaminated area� Application fields• Machinery room• Cold rooms and freezers• Ventilation and air conditioning systems• Refrigeration compressors• Automotive air conditioning system

Detected gases: R12, R22, R134a, R404A, R410A, R502, R507, HFO1234yf & HFO1234zeMeasurement technology: Advanced infraredAverage sensor life: 10 yearsThree sensitivity levels : Detection from 4 to 14 g/year• High: 4 g/year (0,1 oz/year) and higher• Medium: 7 g/year (0,25 oz/year) and higher• Low: 14 g/year (0,50 oz/year) and higherRepetitivity: 100%Warm-up time: 30 secondsResponse time: < 1 secondCalibration: No requirement (automatic calibration) – Auto-reca-libration in contaminated areasDisplay: LED bar graph displayAlarms: Vibrant visual and audible alarms (one-touch inhibition)Leak indicator: LED green / yellow / redPower supply: Rechargeable Lithium ion battery (AC wall adapter and DC cigarette lighter charger included)Run time: 8 hours on full battery chargeAutomatic stop: after 10 minutes with no activityLow battery alarm: 1 hour remainingCharge time: Approx 3 hoursHousing: Robust with rigid plastic housing, rubberized probeDimension (LxlxH): 5.52x4.45x19.05 cm + 39.4 cm flexible probeWeight: 442 gOperating conditions :• Temperature : 0 to 40 °C• Humidity : 10 to 90% RH (non-condensing)Certifications: SAE J1627, SAE J2791, SAE J2913, EN 14624


20








Refrigerant leak analyzerPGM-IR

Product description

Bacharach's PGM-IR is a refrigerant gas analyzer, particularly suitable for detecting leaks of halogenated refrigerants such as HFCs, HCFCs and HFOs. Its long-life non-dispersive infrared detector (NDIR) measures most known refrigerant gases.

The LCD screen displays gas concentrations in real time with a resolution of 1 ppm and an audible warning allows precise location of the leak source when traditional leak detectors cannot.

The PGM-IR refrigerant leak analyzer is based on the infrared absorption principle. This measurement principle makes it possible to detect gases quickly, selectively and with very high precision (1 ppm for halogenated gases).

The unit self-calibrates every 4 minutes by sucking in ambient air through its filter to determine and adapt the “zero” level and thus allow the device to be used in contaminated environments without affecting the target gas readings.

The PGM-IR probe helps locate leaks in tight or hard to reach places and the long-life battery provides up to 12 hours of operation. With the PC DUMP (Transfer to PC) function of the analyzer, it is possible to transfer the last 200 recorded gas measurements (in csv) for more precise monitoring and analysis.

Upon request, the PGM-IR is also available for CO2 (carbon dioxide), N2O (nitrous oxide) or SF6 (sulfur hexafluoride) leak detection.

� Main assets• Very precise non-dispersive infrared technology (NDIR) with high reliability level• High performance sampling pump for refrigerant gas leaks fast response time• Frequency buzzer to pinpoint the source of the leak• More than 50 refrigerant gases precisely detected• Very low minimum detection threshold (1 ppm)• Locates leaks in contaminated or highly ventilated areas• Unaffected by variations in humidity and temperature• Minimum maintenance and no calibration required• Reduced leakage inspection costs by more than 50%

� Applications areasThe PGM-IR is a particularly suitable solution for searching for leaks in cold stores, hypermarkets, frozen food store chains which have many trays or refrigerated display cases with as many potential micro-leaks that can spoil food and increase operating costs.

Sensor: Non-dispersive infrared (NDIR) Sensor life: 5 to 7 yearsDetected gases: • CFC: R11, R12, R113, R114, R502, HFP • HFC: R404a (HP62), R407a, R407c (AC9000), R-134a, R410a (AZ20), R507 (AZ50), R508b (SUVA95), R236FA, R125, R245Fa, R422a, R422d, R427a, R424a, R426a, et R438a, • HCFC: R22, R123, R124, R500, R503, R401a (MP39), R402a (HP80), R402b (HP81), R408a, R409a, R21, R23, R227 • HALON: H1301, H2402, H1211 • HFO: FA188, FC72, N1230, H1234YF Measuring range: 0 – 10 000 ppm (for all gases)Accuracy: ± 1 ppm ± 10% of reading from 0 to 1000 ppm (for R11, R22, and R113: ±10 ppm ±15% of reading from 0 to 1000 ppm)Preheating time: 5 minutes (300 seconds)Response time: T90 < 5 seconds (100% in 7 seconds)System noise: < 40 dB(A) at 3 mMeasuring flow: 1 l/minDisplay: Large backlit LCD displayFront with 3 light indicators: • Green: undervoltage, in operation• Yellow: faulty system • Red: Overflow of alarmBattery: Rechargeable Li-Ion with charge indicatorOperating conditions:• Temperature: 0 to 50°C• Humidity: 5 to 90% RH (non-condensing)Dimensions (D x L x W): 229 × 368 × 127 mmWeight: < 4 kg battery included


21



▸


22








Portable multi gasdetectors


23








Portable 4 gases detector (%LEL, O2, CO, H2S)Product description

� The prime portable 4 gas detectorThe X-am® 2500 portable 4 gas detector has been especially designed to monitor combustible gases and vapors, O2, CO, H2S, NO2 and SO2. Reliable and proven detection technology, sensor long shelf life and ease of use ensure high safely level and very low operating costs.

� Ex sensor resistant to poisoningThe Ex catalytic sensor features an excellent resistance against silicon and hydrogen sulfide poisoning. Combined with its high stability, this sensor has an outstanding long-lasting shelf life of more than 4 years.

� Long-lasting electrochemical sensorsEnhanced and powerful XXS sensors for CO, H2S, O2, SO2 and NO2 enable safe use in the industry and refineries. The lead-free oxygen sensor – like the CO and H2S sensors – features a particu-larly long shelf life, making this detector notably reliable with low operating costs.

� Ergonomic and robust designThe X-am® 2500 offers high comfort thanks to its low weight and ergonomic design. An integrated rubber protection and shock-re-sistant sensors provide reinforced safety. This device is resistant to water and dust in compliance with the IP 67 class, which makes it operational even after being immersed in water.

� Maximum safetyThe X-am® 2500 is Ex zone 0 certified. Providing high safety in areas subject to explosion hazard to its user. Thanks to its practical design, gas can enter the unit from above and from the front even if the instrument is inside a pocket or if a gas entry is accidentally covered.

� Difusion or pump modeAn optional external pump with a hose up to 30 meters long is an ideal solution for remote sample measurements in tanks or pits or to detect leaks. The pump automatically starts upon detector start-up. The switch from diffusion to pump operation can be handled quickly and easily without any tool.

Measuring range: Combustible gases: from 0 to 100% LEL in 1% increment Oxygen (O2): from 0 to 30% vol. in 0.1% increment Carbon monoxide (CO): from 0 to 2,000 ppm in 1 ppm increment Hydrogen sulfide (H2S): from 0 to 500 ppm in 0.1ppm increment Alarm: 360° ultra-bright indicators, 90 db sounder at 30cm, vibrating alarm Dimensions (L x H x D): 48 x 130 x 44 mm - Weight: 220/250g Ambient conditions:Protection class: IP 67 Temperature: - 20 to + 50 °C Relative humidity: 10 to 95 % RH Battery life:> 12 to 13h with NiMH HC Charging time < 4 h Data logger:Data retrievable using an infrared interface > 1000 hours for 4 gases. Recording interval: 1 value per minute Certifications:ATEX : M1 Ex ia I Ma, II 1G Ex ia IIC T3 Ga, I M2 – Ex d ia I Mb – II 2G Ex d ia IIC T4/T3 Gb CSA (Canada & USA): Class I Div. 1 Group A, B, C, D T4/T3 A/Ex ia IIC T3/Ga - A/Ex d ia IIC T4/T3/Gb IECEx Ex ia I Ma: Ex ia IIC T3 Ga - Ex d ia I Mb - Ex d ia IIC T4/T3 Gb CE mark: ATEX Directive 94/9/CE MED Marine Equipment Directive 96/98 EC

Technical specification

3 year FULL WARRANTY

▸X-am® 2500

24








Portable 4 gas detector (EXPLO, O2, CO, H2S)

Product description

The Ventis MX4 is a 4 gas detector, specially developed for monitoring combustible gases and vapors (hydrocarbons, methane, LPG), O2 (lack of oxygen), CO, H2S, NO2 and SO2.

It is a versatile ATEX portable gas detector used mainly in sanitation, in the steel industry, in construction and more generally in appli-cations where one must control the presence of these gases.

� A compact and versatile detectorWith a compact and rugged design, the Ventis MX4 is a multi gas detector with the dimensions of a single gas monitor for better mobility. Featuring a high protection index (IP66/IP67), it is water-proof and dustproof and has exceptional durability in severe industrial conditions.

� Remote gas sampling pump

Available in 2 colors, black or orange for better visibility, the Ventis MX4 can be used in diffusion mode or in remote gas sampling mode with a removable clip-on pump. It is an ideal solution for situations that require measures authorizing entry into confined spaces.

� The advantages of the Ventis MX4• Detects from 1 to 4 gases with a large choice of sensor combina-tions: EXPLO (0-100% LIE), O2, CO, H2S, O2, SO2 or NO2• 95 dB audible alarm, ultra-bright visual alarm and strong vibra-tions• Records approximately 3 months of data for a 4 sensor configu-ration • Numerous standardized pictograms for better readability• A multi gas detector with the dimensions of a single gas device• Increased visibility of the instrument thanks to the orange casing• Rechargeable Li-ion battery pack for daily use - up to 12 hours continuous run time• Optional clip-on pump for gas sampling - up to 15 meters

� Ventis MX4, 4 gas detectorSensors: Combustible gases/methane – Catalytic diffusionO2, CO, H2S, NO2, SO2 – ElectrochemicalAlarms: Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm) and vibrating alarmDisplay: Backlit LCD Power source: Rechargeable lithium-ion battery packRun time: 12 hours at 20 ºCCase material: polycarbonate with protective rubber overmold Dimensions: 103 x 58 x 30 mmWeight: 182 g lithium-ion battery versionOperating temperature: -20 °C to 50 °CHumidity range: From 15 to 95 % non-condensing (continuous)IP rating: IP66 - IP67Certifications:• ATEX: Ex ia IIC T4 Ga et Ex ia I Ma; Equipment and group category II 1G/I M1• CSA: Cl I, Div 1, G A-D, T4; Ex d ia IIC T4• UL: Cl I, Div 1, Groups A-D, T4; Zone 0, AEx ia IIC T4

� Clip-on gas sampling pumpCase material: polycarbonate with protective rubber overmoldSampling: 15.2 metersMounting: Latch fixing, no tools requiredDimensions: 143 x 81 x 68 mmWeight: 270 g lithium-ion battery versionPump failure alarms: Sound 90dB + visualIP rating: IP66 - IP67Certifications: Same as Ventis MX4


Ventis MX4

Sensors specifications

Gas

Combustible gas 0 - 100% LEL 1 % LIE

Oxygen 0 - 30 %/vol O2 0,1 %/vol

Carbon monoxide 0 - 1 000 ppm CO 1 ppm

Hydrogen sulfide 0 - 500 ppm H2S 0,1 ppm

Nitric dioxide 0 - 150 ppm NO2 0,1 ppm

Sulfur dioxide 0 - 150 ppm SO2 0,1 ppm

Measure range Increment

25








Portable multi gas detector (up to 5 gases)

Product description

� Various monitoring possibilitiesThanks to the combination of ergonomic design and innovative infrared technology, the X-am® 5000 is the world’s smallest gas detection device. This 1-to-5 gas detector reliably monitors concentrations of combustible gas, amines, Cl2, ClO2, CO, CO2, H2, H2S, HCN, NH3, NO, NO2, O2, O3, PH3, SO2 and organic vapors.

� Small yet robustSmall, light and easy to use - the X-am® 5000 is designed for use in tough industrial environments. The integrated rubber overmold and the shock-resistant sensors provide reinforced protection in case of impact or vibrations. The device is water and dustproof according to the IP 67 standard to provide optimal functionality even after being immersed into water.

� Poison-resistant Ex sensorThe innovative catalytic Ex sensor is highly resistant against sensor poisons such as silicone and hydrogen sulfide. In combination with its long term stability this offers an extraor-dinary long expected sensor lifetime of more than 4 years.

� High performance electrochemical sensorsEquipped with the durable XXS sensors, the Dräger X-am® 5000 offers maximum safety with low operating costs. Thanks to the their resistance and excellent stability, the sensors feature an outstanding durability with more than 4 years lifetime, that allows reduced operating costs.

� Suitable for Ex-Zone 0The X-am® 5000 is Ex approved for zone 0. Thus the device is efficient in areas classified as ATEX zone 0, which are areas where explosive atmospheres are always to be expected.

� Diffusion or pump modeAn optional external pump with a 30 meters hose can be added for remote control before intervention in pits or tanks or to search for leaks. The pump automatically activates upon ignition of the device. It is then easy to switch from diffusion to pump mode and no tool is required.

� An innovative area monitoringThe X-zone 5500 area monitor transforms the Dräger X-am 5000, 5100 and 5600 personal gas detectors into innovative area monitors. A patented combination for increased safety levels: in addition to handheld personal protective devices, these area monitors can be placed where hazardous gases might be released.

Can simultaneously detect up to 5 gasesCombustible gases (catalytic), Amines, Cl2, ClO2, CO, CO2, H2, H2S, HCN, NH3, NO, NO2, PH3, SO2 and organic vaporsAlarms: 360° ultra-bright LED, 90 dB at 30 cm and vibratingDimensions (L x H x P) : 48 x 130 x 44 mm – Weight 250 gAmbient conditions: -20° to +50°C / 10% to 95% HRIngress protection: IP 67Run time:• 12 hours with NiMH battery• Charging time: < 4 hoursData logger:Can be read out via Infrared > 1,000 hours with 5 gases and a recording interval of 1 value per minutePump operation:No tools required / Pump automatic ignition / Maximum hose length: 30mCertifications:• ATEX : M1 Ex ia I Ma II 1G Ex ia IIC T4/T3 Ga• CSA (USA) : Div.1, Classe I, Groupes A,B,C,D T4/T3 A/Ex ia IIC T4/T3 /Ga• IEC : Ex ia I Ma Ex ia llC T4/T3 Ga• Marquage CE : Compatibilité électromagnétique 2004/108/CE ATEX Directive 94/9/CE• MED Marine Equipement Directive 96/98/CE


X-am® 5000

26








Gas Measuring range Resolution Part Number

Ex (Cathalytic) 0 - 100 % LIE

1 % LIE 68 12 9500 - 100 % vol. CH4Amine 0 - 100 ppm 1 ppm 68 12 545Cl2 0 - 20 ppm 0,05 ppm 68 10 890CO 0 - 2 000 ppm 2 ppm 68 11 882CO / 5 years lifetime 0 - 2 000 ppm 2 ppm 68 11 212CO / H2 compensated 0 - 2 000 ppm 2 ppm 68 11 950CO / Hight concentration 0 - 10 000 ppm 5 ppm 68 12 010

CO / H2S 0 - 2 000 ppm CO0 - 200 ppm

2 ppm1 ppm 68 11 410

CO2 0 - 5 %/vol. 0,1 %/vol. 68 10 889

COCl2 0 - 10 ppm 0,01 ppm 68 12 005

H2 0 - 2 000 ppm 5 ppm 68 12 370

H2 / Hight concentration 0 - 4 %/vol. 0,01 %/vol. 68 12 025

H2S 0 - 200 ppm 1 ppm 68 10 883

H2S / 5 years lifetime 0 - 200 ppm 1 ppm 68 10 213

H2S / Low concentration 0 - 100 ppm 0,1 ppm 68 11 525

H2S / Hight concentration 0 - 1 000 ppm 2 ppm 68 12 015

HCN 0 - 50 ppm 0,1 ppm 68 10 887

HCN 0 - 50 ppm 0,5 ppm 68 13 165

NH3 0 - 300 ppm 1 ppm 68 10 888

NO 0 - 200 ppm 0,1 ppm 68 11 545

NO2 0 - 50 ppm 0,1 ppm 68 10 884

NO2 / Low concentration 0 - 50 ppm 0,02 ppm 62 12 600

O2 0 - 25 %/vol. 0,1 %/vol. 68 12 881

O2 / 5 years lifetime 0 - 25 %/vol. 0,1 %/vol. 68 12 211

O2 0 - 100 %/vol. 0,5 %/vol. 68 12 385

O3 0 - 10 ppm 0,01 ppm 68 12 005

Odorant 0 - 40 ppm 0,5 ppm 68 12 535

OV 0 - 200 ppm 0,5 ppm 68 11 530

OV-A 0 - 200 ppm 1 ppm 68 11 535

PH3 0 - 20 ppm 0,01 ppm 68 10 886

PH3 0 - 2 000 ppm 1 ppm 68 12 020

SO2 0 - 100 ppm 0,1 ppm 68 10 885

Sensors references

X-am 5000 detector with support CD and conformity and calibration certificates 83 20 000

Standard charging kit with charging module and individual power supply (universal) 83 18 785

Dräger X-am® 1/2/5x00 external pump 83 27 115

Confined space entry kit with external pump and 3 meters hose 83 27 117

Carrying case for Dräger X-am® 1/2/5x00 external pump (empty) 83 27 104

Dräger GasVision7 83 25 646

DIRA USB kit with USB wire and IR communication adaptor 83 17 409

Designation Reference

Items references

27








Portable multi gas detector (from 1 up to 6 gases)

Product description

� Various monitoring possibilitiesThanks to the combination of ergonomic design and innovative infrared technology, the X-am® 5600 is the world’s smallest gas detection device. This 1-to-6 gas detector reliably monitors explosive, combustible and harmful concentrations of O2, Cl2, CO, CO2, H2, H2S, HCN, NH3, NO, NO2, PH3, SO2, O3, Amine, Odorant, COCl2 and organic vapors.

� Small yet robustSmall, light and easy to use - the X-am® 5600 is designed for use in tough industrial environments. The integrated rubber overmold and the shock-resistant sensors provide a reinforced protection in case of impact or vibrations. The device is water- and dustproof according to the IP 67 standard and to provides optimal functio-nality even after being plunged into water.

� Durable infrared technologyThe IR Explo infrared sensor can detect explosive and flammable hydrocarbons concentrations in the lower explosive limits. This sensor can also monitor methane, propane and ethylene with a measuring range set at 0-100% vol. The IR CO2 sensor features an outstanding measuring resolution (0.01% vol.) for reliable and accurate measurements in presence of carbon dioxide in ambient air. A dual IR CO2 Ex sensor is available for applications that require reliable monitoring of explosive substances and CO2.

� High performance electrochemical sensorsEquipped with durable XXS sensors, the Dräger X-am® 5600 offers maximum safety with low operating cost. Thanks to their resistance and excellent stability, the sensors feature an outstanding durability – over 4 years - which helps on reducing operating costs.

� Diffusion or pump modeAn optional external pump with 30 meters hose can be added for remote control before interventions in pits, tanks or to search for leaks. The pump automatically activates upon the device startup. It is then easy to switch from diffusion to pump mode - without any tools required.

� An innovative area monitoringThe X-zone 5500 area monitor transforms Dräger X-am 5000, 5100 and 5600 personal gas detectors into innovative area monitors that suit in many applications. A patented combination for increased safety!

Can simultaneously detect up to 6 gasesCombustible gases (infrared), Amines, Cl2, ClO2, CO, CO2 (infrared), H2, H2S, HCN, NH3, NO, NO2, PH3, SO2 and organic vaporsAlarms: 360° ultra-bright LED, 90 dB at 30 cm and vibrationsDimensions (L x H x P): 48 x 130 x 44 mm – Weight 250 gAmbient conditions: 20° to +50°C / from 10% to 95% HRIngress protection: IP 67Run time:• 9 hours with NiMH battery • Charging time: < 4 hoursData logger:Can be read out via Infrared > 1000 hours with 6 gases and a recor-ding interval of 1 value per minutePump operation:• No tools required - Pump automatic startup• Maximum hose length: 30mCertifications:• ATEX: I M1 Ex ia I Ma II 1G Ex ia IIC T4/T3 Ga• CS1 (USA): Div.1, Class I, Groups A,B,C,D T4/T3 A/Ex ia IIC T4/T3 /Ga• IEC: Ex ia l Ma Ex ia llC T4/T3 Ga for MQG 01• CE marking: Electromagnetic compatibility 2004/108/CE ATEX Directive 94/9/CE• MED: Marine Equipment Directive 96/98/EC


X-am® 5600

28








Gas Measuring range Resolution Part NumberEx (IR) 0 - 100 % LIE 1 % LIE 68 12 180CO2 (IR) 0 - 5 %/vol. 0,01 %/vol. 68 12 190

Ex / CO2 (IR) 0 - 100 % LIE0 - 5 %/vol.

1 % LIE0,01 %/vol. 68 12 960

Amine 0 - 100 ppm 1 ppm 68 12 545Cl2 0 - 20 ppm 0,05 ppm 68 10 890CO 0 - 2 000 ppm 2 ppm 68 11 882CO / 5 years lifetime 0 - 2 000 ppm 2 ppm 68 11 212CO / H2 compensated 0 - 2 000 ppm 2 ppm 68 11 950CO / Hight concentration 0 - 10 000 ppm 5 ppm 68 12 010

CO / H2S 0 - 2 000 ppm CO0 - 200 ppm

2 ppm1 ppm 68 11 410

CO2 0 - 5 %/vol. 0,1 %/vol. 68 10 889

COCl2 0 - 10 ppm 0,01 ppm 68 12 005

H2 0 - 2 000 ppm 5 ppm 68 12 370

H2 / Hight concentration 0 - 4 %/vol. 0,01 %/vol. 68 12 025

H2S 0 - 200 ppm 1 ppm 68 10 883

H2S / 5 years lifetime 0 - 200 ppm 1 ppm 68 10 213

H2S / Low concentration 0 - 100 ppm 0,1 ppm 68 11 525

H2S / Hight concentration 0 - 1 000 ppm 2 ppm 68 12 015

HCN 0 - 50 ppm 0,1 ppm 68 10 887

HCN 0 - 50 ppm 0,5 ppm 68 13 165

NH3 0 - 300 ppm 1 ppm 68 10 888

NO 0 - 200 ppm 0,1 ppm 68 11 545

NO2 0 - 50 ppm 0,1 ppm 68 10 884

NO2 / Low concentration 0 - 50 ppm 0,02 ppm 62 12 600

O2 0 - 25 %/vol. 0,1 %/vol. 68 12 881

O2 / 5 years lifetime 0 - 25 %/vol. 0,1 %/vol. 68 12 211

O2 0 - 100 %/vol. 0,5 %/vol. 68 12 385

O3 0 - 10 ppm 0,01 ppm 68 12 005

Odorant 0 - 40 ppm 0,5 ppm 68 12 535

OV 0 - 200 ppm 0,5 ppm 68 11 530

OV-A 0 - 200 ppm 1 ppm 68 11 535

PH3 0 - 20 ppm 0,01 ppm 68 10 886

PH3 0 - 2 000 ppm 1 ppm 68 12 020

SO2 0 - 100 ppm 0,1 ppm 68 10 885

Sensors references

X-am 5000 detector with support CD and conformity and calibration certificates 83 21 050

Standard charging kit with charging module and individual power supply (universal) 83 18 785

Dräger X-am® 1/2/5x00 external pump 83 27 115

Confined space entry kit with external pump and 3 meters hose 83 27 117

Carrying case for Dräger X-am® 1/2/5x00 external pump (empty) 83 27 104



Designation References

Items references

29








ATEX- 5 Sensors Personal Gas MonitorVentis™ Pro

Product descriptionThe Ventis™ Pro personal gas monitor detects up to five gases simultaneously among which : Combustible gases (hydrocarbons, solvents, alcohols), Cl2, CO, CO2, H2S, HCN, NO2, NH3, O2, PH3 and SO2.

In addition to its gas detection functions, it includes a “man down” distress alarm, an imminent danger alert button and personalized messages appear on the screen to facilitate communication and technicians' work.

� Function (Isolated Worker Protection) as standard

The Ventis™ Pro is equipped with numerous functions dedicated to more safety such as the PASS (Personal Alert Safety System) and a “Panic” button to quickly alert teams in case of emergency.

For better alarms and dangers interpretation, programmable, clear action messages like “VENTILATE” or “EVACUATE” are displayed at start-up or in the event of a pre-alarm.

� LENS™ Wireless communication

The LENS™ Wireless technology available on Ventis™ Pro detec-tors and Radius BZ1 area gas monitors, constitute a new approach to global security for people in hostile environments.

Now, these devices can communicate with each other remotely and especially wirelessly. When an alert is triggered, all individuals with connected equipment are warned in real time for faster and safer intervention in case of significant risks.

� Clip-on gas sampling pump

The VSP clip-on is ideal for operators who primarily use a gas detector for personal protection and who require a gas sampling pump before entering a confined space. No tools are required to connect or remove the pump from the Ventis™ Pro detector.

� Dual Sense technologyThe Ventis™ Pro incorporates the DualSense® technology, which uses two identical sensors to detect the same gas. This reduces the sensor failure risk while providing users with the best protec-tion, regardless of trigger tests frequency thus making it one of the safest detectors on the market.

� The iAssign® technologyWith the iAssign® technology available on the Ventis™ Pro, it’s very easy to identify a user and a specific access area. This sys-tem uses the principle of a programmed badge including various information such as the user's identity, a geographic sector, etc. and associates the detector to this information.

Detect up to five gas simultaneously:Combustible gases (hydrocarbons, solvents, alcohols), Cl2, CO, CO2, H2S, HCN, NO2, NH3, O2, PH3 et SO2Case Material: Polycarbonate with protective rubber overmoldDisplay: Backlit liquid crystal display (LCD) Keypad: Two buttons for operation. Dedicated « panic » buttonAlarms: 360° ulta-bright LED Visual alarm (two red, two blue), Audible alarm (95 dB at distance of 10 cm) and vibrating alarmDimensions:• 104 x 58 x 36 mm without pump• 172 x 67 x 65 mm with Pump Weight : 200 g (390 g with pump) Ingress protection: IP 68 Certifications:• UL - Class I, zone 0, AEx ia IIC, in temperature class T4 - Class I, zone 1, AEx d ia IIC T4 with IR sensor• ATEX - Equipment group and category II 1G, Ex ia IIC, with protection category Ga, in temperature class T4 - II 2G, Ex d ia IIC T4 with IR sensor• IECEx - Class I, zone 0, Ex ia IIC, with protection category Ga, in tempe-rature classT4 - Class I, zone 1, Ex d ia IIC T4, with IR sensor Communication (LENS™ Wireless Mesh Network)• Frequency: ISM license-free band (2,405 à 2,480 GHz)• Max Peers: 25 devices per network group• Range: 100 m line of sight (face-to-face)• Certifications: FCC Part 15, IC, CE/RED, others


30








Catalytic Sensors

Methane (% vol.) 0-5 %/vol, 0,01 %/vol. 17155304-M

Methane (% LEL) 0-100 % LEL 1 % LEL 17155304-L

Pentane (% LEL) 0-100 % LEL 1 % LEL 17155304-K

Electrochemical Sensors




Nitrogen dioxide 0-150 ppm NO2 0,1 ppm 17155306-4

Sulfure dioxide 0-150 ppm SO2 0,1 ppm 17155306-5

Carbon Monoxide 0-2000 ppm CO 1 ppm 17155606-1

Carbon Monoxide (compensated H2) 0-1000 ppm CO 1 ppm 17155306-G

Carbon Monoxide / Hydrogen sulfide (combined sensors)

0-1500 ppm CO 0-500 ppm H2S

1 ppm 0,1 ppm

17155304-J 17155306-J

Oxygen (lifetime : 2 years) 0-30 %/vol, O2 0,1 %/vol. 17155304-3

Oxygen (long duration) 0-30 %/vol, O2 0,1 %/vol. 17155304-Y 17155306-Y


Hydrogen sulfide 0-500 ppm H2S 0,1 ppm 17155304-2 17155306-2

IR Sensor (infrared)

Carbon Dioxide 0-5% vol 0,01 %/vol. 17155304-Q

Carbon Dioxide / Hydrocarbon (Combined sensors)0-5% vol 0-100 % LEL

0,01 %/vol. 1 %/vol.

17155304-U

Carbon Dioxide / Methane (Combined sensors) 0-5% vol 0-100 % LEL

0,01 %/vol. 1 %/vol.

17155304-V

Hydrocarbons (Propane) 0-100 % LEL 1 %/vol. 17155304-P

Methane (%/vol.)0-5% vol 0-100 %/vol.

0,01 %/vol. 0,1 %/vol.

17155304-N

DualSense Sensors

Oxygen (Lifetime : 2 years) 0-30 %/vol, O2 0,1 %/vol. 17155304

Carbon Monoxide / Hydrogen sulfide (Combined sensors)

0-1500 ppm CO 0-500 ppm H2S

1 ppm 0,1 ppm

17156919

Carbon Monoxide 0-2000 ppm CO 1 ppm 17157781

Hydrogen sulfide 0-500 ppm H2S 0,1 ppm 17157782

Sulphur dioxide 0-150 ppm SO2 0,1 ppm 17157783

Gas Range Resolution Serie 4 Serie 4

Configuration of sensors

Series 4 (O2 & toxics)

Series 6 (toxics)

High energy slot Series-4(Explo, IR, O2 & Toxics)

Series 6 (toxics)

31








Portable multi gas detector (up to 7 gases)

Product description

� Many gas monitoring optionsEquipped with a user-friendly colored display and the latest gas detection technologies, the X-am® 8000 multi gas monitor can simultaneously detect up to 7 gases including: combus-tible gases, amines, Cl2, ClO2, CO, CO2, H2, H2S, HCN, NH3, NO, NO2, O2, O3, PH3, SO2 and volatile organic compounds (VOC).

� Ergonomic and robustConvenient with its ergonomic design, the X-am® 8000 features three function keys for easy one-hand operation. The easy-to-read colored display clearly lays out useful information to its user. Especially designed for use in extreme industrial environments, the X-am® 8000 features a rubber overmold that improves safety in case of shocks or vibrations. It is water- and dust-proof in compliance with the IP 67 ingress protection standard and can properly operate even after being plunged into water.

� Long-lasting high performance sensors• To monitor hard-to-detect hydrocarbons, the X-am® 8000 features two high-performance PID sensors. A high concentration PID sensor that covers a measuring range between 0 and 2,000 ppm (isobutylene), and a low concentration PID sensor particu-larly well-suited to a measuring range between 0 and 10 ppm (isobutylene) with a low range resolution. • The IR Explo infrared sensors can detect explosive and flammable hydrocarbons in LEL as well as in percentage of the volume; and the IR CO2 infrared sensor – which features an excellent measuring resolution (0,01 Vol.-%) – can reliably and accurately detect harmful concentrations of carbon dioxide in ambient air. • Electrochemical sensors are particularly resistant and feature an excellent stability and an outstanding durability - over 4 years - which helps on reducing operating costs

� Inductive charging system The X-am 8000 detector features induction charging for easy operation and improved life time. Now operators don’t face issues like corrosion or contact problems with the charging cradle anymore.

� Optimized pump mode

The X-am 8000 multi gas detector can be equipped with a very powerful gas sampling pump to draw samples up to 45 meters away. A pump adaptor enables users to easily switch from diffusion mode to pump mode in order to preserve battery life, reduce pump wear and improve service life.

Can simultaneously detect up to 7 gasesCombustible gases (catalytic or infrared), amines, Cl2, ClO2, CO, CO2 (electrochemical or infrared), H2, H2S, HCN, NH3, NO, NO2, O2, O3, PH3, SO2 and volatile organic compounds (10.6 eV PID lamp)Alarms: • Visual: 3 LED red (gas alarms) + 3 LED yellow (device alarms)• Acoustic Multi-tone, typically 100 dB(A) at 30 cm & VibrationDimensions (H x W x D): 179 x 77 x 42 mmWeight: Approx. 495 g without pump (550 g with pump)Ingress protection class: IP 67Temperature: -20° C to 50° CAmbient conditions: Relative humidity 10 to 90% RHPower supply: Lithium-ion battery, rechargeable & inductiveRun time:• From 15 up to 20 hours depending on the configuration• Charging time: < 4 hoursPump operation:• Automatic activation upon detector startup• 30 meters maximal hose length• No tools requiredCertifications:• ATEX: I M1 Ex ia I Ma II 1G Ex ia IIC T4/T3 Ga• CS1 (USA): Div.1, Class I, Groups A,B,C,D T4/T3 A/Ex ia IIC T4/T3 /Ga• IEC: Ex ia l Ma Ex ia llC T4/T3 Ga for MQG 01• CE marking: Electromagnetic compatibility 2004/108/CE ATEX Directive 94/9/CE• MED: Marine Equipment Directive 96/98/EC


X-am® 8000

32








Gas Measuring range Resolution Part Number

PID LC ppb / Low concentration (10.6 eV lamp)

0.05 - 10 ppm isobutylene0 - 5 ppm benzene

depending on measurement(starting at à 10 ppb) 68 13 500

PID HC / Hight concentration(10.6 eV lamp)

0 - 200 ppm isobutylene0 - 1000 ppm benzene

depending on measurement(starting at 0.1 ppm) 68 11 475

Ex (IR) 0 - 100 % LIE 1 % LIE 68 12 180CO2 (IR) 0 - 5 %/vol. 0,01 %/vol. 68 12 190

Ex / CO2 (IR) 0 - 100 % LIE0 - 5 %/vol.

1 % LIE0,01 %/vol. 68 12 960

Amine 0 - 100 ppm 1 ppm 68 12 545Cl2 0 - 20 ppm 0,05 ppm 68 10 890CO 0 - 2 000 ppm 2 ppm 68 11 882CO / 5 years lifetime 0 - 2 000 ppm 2 ppm 68 11 212CO / H2 compensated 0 - 2 000 ppm 2 ppm 68 11 950CO / Hight concentration 0 - 10 000 ppm 5 ppm 68 12 010

CO / H2S 0 - 2 000 ppm CO0 - 200 ppm

2 ppm1 ppm 68 11 410

CO2 0 - 5 %/vol. 0,1 %/vol. 68 10 889COCl2 0 - 10 ppm 0,01 ppm 68 12 005H2 0 - 2 000 ppm 5 ppm 68 12 370H2 / Hight concentration 0 - 4 %/vol. 0,01 %/vol. 68 12 025H2S 0 - 200 ppm 1 ppm 68 10 883H2S / 5 years lifetime 0 - 200 ppm 1 ppm 68 10 213H2S / Low concentration 0 - 100 ppm 0,1 ppm 68 11 525H2S / Hight concentration 0 - 1 000 ppm 2 ppm 68 12 015HCN 0 - 50 ppm 0,1 ppm 68 10 887HCN 0 - 50 ppm 0,5 ppm 68 13 165NH3 0 - 300 ppm 1 ppm 68 10 888NO 0 - 200 ppm 0,1 ppm 68 11 545NO2 0 - 50 ppm 0,1 ppm 68 10 884NO2 / Low concentration 0 - 50 ppm 0,02 ppm 62 12 600O2 0 - 25 %/vol. 0,1 %/vol. 68 12 881O2 / 5 years lifetime 0 - 25 %/vol. 0,1 %/vol. 68 12 211O2 0 - 100 %/vol. 0,5 %/vol. 68 12 385O3 0 - 10 ppm 0,01 ppm 68 12 005Odorant 0 - 40 ppm 0,5 ppm 68 12 535OV 0 - 200 ppm 0,5 ppm 68 11 530OV-A 0 - 200 ppm 1 ppm 68 11 535PH3 0 - 20 ppm 0,01 ppm 68 10 886PH3 0 - 2 000 ppm 1 ppm 68 12 020SO2 0 - 100 ppm 0,1 ppm 68 10 885

Sensors references

Pack X-am 8000 diffusion version including: the device with its battery (lithium-ion), data logger, battery charger, strap, comformity & calibration certificate 83 25 800-D

Pack X-am 8000 pump version 83 25 800-P

Removable rubber protection 83 25 858

Vertical position stand for the device (use example: area monitoring) 83 25 874



USB DIRA dongle holder (mounting on device) 83 25 859


Items references

33








Multi gas detector (Up to 6 gases)MX6 iBrid®

Product description

The MX6 iBrid® is the most versatile six gas detector on the mar-ket and allows sensor combinations that few devices can offer. With several hundred possible sensors combinations and a wide range of configuration settings, the MX6 iBrid® can detect flam-mable gases, toxic gases, asphyxiating gases as well as volatile organic compounds (VOCs).

� Simple and intuitive operationThe MX6 iBrid® clearly displays real-time measurements in ppm or volume %. Thanks to an intuitive menu and a 5-button naviga-tion pad, each user is able to quickly configure various parameters and functionalities on the device.

� High visibility color displayThe MX6 iBrid® has a color screen offering great readability whatever the light conditions which contributes to safety level improvements. Whether the intervention takes place outdoors or indoors, it is quick and easy to clearly and directly view recorded data and concentration trend curves.

� Remote gas sampling pumpThe MX6 iBrid® is available in diffusion version or with a remote gas sampling pump. This pump is easily adaptable (and dismoun-table), it allows gas sampling up to 30 meters away and is the ideal solution for authorized entry measurements in tanks and wells or for leak detection.

� The datalink optionThe Datalink option allows you to view and archive the device's data, restore measurement curves and alarm events. This option also allows setting and the configuration of the device, it gives access to data logs and calibrations and bump test results.

The kit is supplied with a device holder, a USB connection cable and an instal-lation CD for the “Accessory Software”.

List of monitored gases: Combustible gases (methane, GPL, hydrocarbons, solvents, alcohols), toxic gases (Cl2, ClO2, CO, H2, H2S, HCl, HCN, NO, NO2, NH3, PH3, SO2), asphyxiating gases (O2, N2, CO2) and VOCs (volatile organic compounds)Case material: Lexan/ABS/Stainless steel with protective rubber overmoldDimensions:• 135 x 77 x 43 mm without pump• 167 x 77 x 56 mm with pumpWeight: 409g without pump / 511g with pump Display: STN color graphic LCD Power/ autonomy:• Rechargeable lithium-ion (Li-ion) / Approx. 24 hours• Rechargeable Li-ion battery / Approx. 36 hours• Disposable AA alkaline batteries (usually 10.5 hours) Operating temperatures range: - 20 ºC to 55 ºC Operating humidity range: 15% to 95% HR non-condensed Certifications:• IECEx/ATEX:

• UL:

• CSA: • MSHA: • ANZEx: • INMETRO: • GOST-R: • KOSHA: • China EX:


Ex ia d I/IIC; IP65 (IP64 pump version)Equipment group and category: II 2G / I M1, EN 60079-29-1; EN 50104Class I, Groups A, B, C, D T4;Class II, Groups F, G; AEx ia d IIC T4 Class I, Groups A, B, C, D T4; Ex d ia IIC T4 30 CFR, Parts 18 and 22Ex ia s Zone 0 I, IP64 Asp., IP65 Dif. Ex ia s Zone 0 IIC T4BR - Ex ia d IIC T4 GbPB Ex ia dI X / 1ExiadIICT4 X Ex d ia IIC T4Ex ia d I/IIC T4

34








Gas Measure range Increment Code

Catalytic Sensors

Methane (% vol.) 0-5 %/vol, 0,01 %/vol. 17124975-M

Methane (% LIE) 0-100 % LEL 1 % LEL 17124975-L

Pentane (% LIE) 0-100 % LEL 1 % LEL 17124975-K

Electrochemical Sensors



Hydrogen chloride 0-30 ppm HCl 0,1 ppm 17124975-A


Nitrogen dioxide 0-150 ppm NO2 0,1 ppm 17124975-4

Chlorine dioxide 0-1 ppm ClO2 0,01 ppm 17124975-8

Sulfur dioxide 0-150 ppm SO2 0,1 ppm 17124975-5

Hydrogen 0-2000 ppm H2 1 ppm 17124975-C

Nitric oxide 0-1000 ppm NO 1 ppm 17124975-D

Carbon monoxide 0-1500 ppm CO 1 ppm 17124975-1

Carbon monoxide (High range) 0-9999 ppm CO 1 ppm 17124975-H

Carbon monoxide (compensated H2) 0-1000 ppm CO 1 ppm 17124975-G

Carbon monoxideHydrogen sulfide (combined sensors)

0-1500 ppm CO 0-500 ppm H2S

1 ppm 0,1 ppm

17124975-J

Oxygen 0-30 %/vol, O2 0,1 %/vol. 17124975-3


Phosphine (hight range) 0-1000 ppm PH3 1 ppm 17124975-E

Hydrogen sulfide 0-500 ppm H2S 0,1 ppm 17124975-2

IR Sensors (infrared)

Carbon Dioxide 0-5% vol 0,01 %/vol. 17124975-Q

Hydrocarbons (Propane) 0-100 % LEL 1 %/vol. 17124975-P

Methane (% LIE) 0-100 % LEL 1 % LEL 17124975-S

Methane (% vol,) 0-100 % vol 1 %/vol. 17124975-N

PID sensors (photo-ionization lamp)

VOC 0-2000 ppm 0,1 ppm 17124975-R

Sensors references

Datalink for MX6 (configuration and archiving of measurements) 18107086

Pump for MX6 18106765

Sampling rod (1 m in 4 parts) 2302B0847

Flexible hose, length 10 m for sampling 12302B0828

Reference

Accesories references

Accessories

35








Gas chromatograph - VOC detectorX-PID 9500

Product descriptionBased on the gas chromatography (GC) and on the photo-ioniza-tion detection (PID) technologies, the X-PID 9500 is the first ever selective VOC gas detector (volatile organic compounds) that pro-vides test results worthy of lab tests with very short response time.

� Innovative operationThe X-PID 9500 consists of three elements: a measurement unit with sample pump comprising a gas chromatograph associated with a photo-ionization PID detector, an explosion-proof control unit with touch screen, and a mobile application for intuitive manipulation and control.

� High gas selectivity for finer analysis Most of PID detectors on the market only indicate the total VOC concentration without discriminating between the different gases. The X-PID 9500 "Analytical" selective measurement mode is based on a technology separating the various compounds present in gas mixtures. This makes possible a specific benzene measurement for example, even if other VOCs are also present at high concentrations, which significantly reduces false positives and false alarms.

� Reliable performances even in difficult conditionsInfluence of environmental factors, such as variable ambient tem-perature or high humidity on measurement results is minimized. Maintaining constant higher than ambient air temperatures, the sensor also separates water vapor from the targeted compounds. This guarantees reliable measurements in difficult conditions.

� Fast and easy operationThe X-PID 9500 requires no special preparation, it is very quickly operational after a short preheating phase. The selective mea-surement in "Analysis" mode only takes a few seconds or minutes depending on the preselected gases. No prior knowledge or advanced training is required.

� Measurement unitDimensions (w x h x d): 132 x 281 x 56 mmWeight: Approx. 880 gIntegrated pump: to connect hose up to 10 mOperating conditions:• Temperature: 10 °C to +35 °C • Pressure: 700 to 1 300 mbar• Relative humidity: 10 % to 95 % HRProtection: IP54Stabilization phase: Approx. 10 min (might be longer in low temperatures)Operating time: Usually 8 h (less if the ambient temperature is lower) Certifications:• ATEX: II 1G Ex ia IIC T4 Ga• IECEx: Ex ia IIC T4 Ga• CE marking: RED (Directive 2014/53/UE) ATEX (2014/34/UE Directive) RoHS (2011/65/EU Directive)

� Control unitATEX zone 2/22 smartphoneCertifications : • ATEX : II 3G Ex ic IIC T4 Gc IP64 • IECEX : Ex ic IIC T4 Gc IP64• Class I, Division 2, Groups A, B, C, D, T4Dimensions: 137 x 72.1 x 20.8 mmWeight: Env. 290 g Lithium-Ion 4 800 mAh battery4" touch screen (can be used with gloves) high visibility, even in bright sunlight Protection: IP68 (submersible, resistant to microparticles)


36








Gas CAS number

Acrolein C3H4O 107-02-8

Benzene C6H6 71-43-2

1,3-Butadiene C4H6O2 106-99-0

2-Butanone C4H9NO 78-93-3

Butyl acrylate C7H1202 141-32-2

Chlorobenzene C6H5CL 108-90-7

1,1-Dichloroethene C2H2CL2 75-35-4

cis-1,2-Dichloroethylene C2H2CL2 156-59-2

trans-1,2 Dichloroethylene C2H2CL2 156-60-5

Epichlorhydrin C3H5OCL 106-89-8

Ethyl acetate C4H8O2 141-78-6

Ethyl acrylate C5H8O2 140-88-5

Ethyle benzene C8H10 100-41-4

Ethylene oxide C2H4O 75-21-8

n-Hexane C6H14 110-54-3

Isobutylene C4H8 115-11-7

Methyl acrylate C4H6O2 96-33-3

Methyle Bromide CH3BR 74-83-9

Hydrogen phosphine PH3 7803-51-2

Propylene oxide C3H6O 75-56-9

Styrene C8H8 100-42-5

Tetrachloroethylene C2CL4 127-18-4

Tetrahydrofurane C4H8O 109-99-9

Toluene C7H8 108-88-3

Trichlorethylene C2CL3H 79-01-6

Vinyl chloride C2H3CL 75-01-4

m-Xylene C8H10 108-38-3

o-Xylene C8H10 95-47-6

p-Xylene C8H10 106-42-3

Formula

List of target compounds

Measurement unitcompiles measurement values and sends them via Bluetooth to the control unit.

Photo-ionization detectorfor a measurement in the ppb field.

Control unitwith large touch screen, WiFi and 4G / LITE connec-Integrated gas chromatograph (GC)

to separate compounds in gas / vapor mixtures.

Integrated pumpallows hose connection (up to 10 m long).

Mobile Appfor intuitive hand-ling and control.

37








Gas detector with integrated localization & lone worker monitoringBlackline G7c

The Blackline Live web platform

Blackline Live is an online monitoring portal that can be accessed from any computer or mobile device (phone, tablet) with internet connection – secured access. The platform offers the capacity to process in-depth data analysis to optimize operations.

� A real-time dashboard Available from the Blackline Live platform, a real-time dashboard provides a detailed breakdown of the G7c units on a given connectivity zone. Thus, accidents and emergency situations can be monitored right when they occur. The dashboard can also be used to trigger alert signals to alert personnel on the worksite, to launch and monitor emergency response adapted to each situation (SOS latch, true fall detection®, no-motion detection, missed check-ins).

� Very detailed reportsAll parameters, information and incidents of a given G7c fleet are transmitted in real time or delayed for non-connected zones. This data can be analyzed and compiled in detailed reports (tables, graphs, etc.) All essential information on each device is also available (last bump test, calibrations, gas detection alarm events, safety alerts to identify hazardous zones).

� A 24/7 alert & safety response center Offering professional safety monitoring and emergency response management services to teams in the field, the Blackline safety operations center ensures safety 24/7.At the same time it is entirely possible to monitor your worker’s safety using your own

The G7c is the only portable ATEX zone 0 device that is at the same time a complete lone worker PASS (personal alert safety system), a gas detector (single gas or multi gas, with or without pump) and a talkie-walkie (real time two-way voice communication). This device connects to 2G/3G networks to monitor, inform and protect personnel working in hazardous areas in real time. Like a phone, the Blackline G7c operates with a 1 to 5 years subscription offering a complete set of services tailored to meet each appli-cation needs.

� A geotagged PASS The G7c - standard – has a complete real time geo-localized PASS to monitor lone workers. The standard device features a fall detector (verticality monitor), a no-motion detection function (“dead man’s alert system”) and an SOS emergency latch (“panic button”)

� Portable gas detector (up to 5 gases)In addition to being a complete tracked PASS, the G7c can be equipped with a gas detection cartridge, converting it into a full geo-localized PASS gas monitor. For confined spaces inter-ventions, a gas sampling pump can be added to the device. Gas detection sensors are under guarantee and will be replaced in case of failure* throughout the end of the service subscription plan. *normal use of the device

� PTT button (Push To Talk) The G7c also features the PTT functionality (“push-to-talk” commu-nication button). The PTT button is designed to use the G7c as a talkie-walkie (IP voice communication): G7c users in the same organization and on the same channel can converse in real time with efficient two-way communication.

Product description

38








Connectivity

Blackline Live platform access

Compliance dashboard

Blackline Analytics

Cartridges and gas sensors maintenance

Real-time alerts

Security monitoring by the safety operations system (SOC)

Two-way voice calls (G7c)

PTT button (Push to call latch)(G7c)

� Standard G7c functions • Fall and no-motion detection: Accelerometer and 3-axis gyroscope, configurable sensitivity, configurable no-motion delay• SOS alert: Pull on the red latch• Silent alert: Push on the red button • Low battery alert: configurable value• Security check-ins: 30 to 180 min configurable or disabled, automatic while drivingDimensions : 64 mm x 124 mm x 27 mm / 162 g / IP67

� Blackline Live Web AppThe cloud-based web portal is highly configurable to suit the most demanding applications, map insertion, employee’s addresses, user roles, alert management, device configuration and detailed reports.

Ergonomic design: Large back-lit LCD screen, menu acces-sible through 3 buttons, on/off, release button and SOS latch (immediate alert)Alarm : sound (95 dB @ 30 cm), LED and vibration

Voice calls: built-in speaker and microphoneG7c Wireless Radio: 100 countries coverage, 200 providersG7c localization updates: 5 min

Battery: rechargeable Li-ion, 18 hours at 20°C normal useCharging time: 4 hours

Certifications :• SAR, RoHS, CE, RCM• FCC ID XPY1CGM5NNN-IC ID : 8595A-1CGM5NNN• Canada and USA: Class I Division 1 Gr A, B, C, D T4; Class I Zone 0AEx da ia IIC T4; Ex da ia IIC T4 Ga• IECEx: Ex da ia IIC T4 Ga• ATEX: Ex da ia IIC T4 Ga II 1 G• LEL: CSA C22.2 No. 152; ISA 12.13.01


Service options

Gas sensors

Ammonia (NH3)0- 100 ppm 0.1 ppm

0- 500 ppm 1 ppm

Carbon Monoxide (CO)0- 500 ppm 1 ppm

0- 2000 ppm 5 ppm

Carbon Monoxide H2 resistant (CO-H)

0-500 ppm 1 ppm

Carbon Dioxide (CO2) 0- 50, 000 ppm 50 ppm

Chlorine (Cl2) 0- 20 ppm 0.1 ppm

Chlorine Dioxide (ClO2) 0- 2 ppm 0.01 ppm

Dual tox CO/H2S0- 500 ppm CO 1 ppm CO

0- 100 ppm H2S 0.1 ppm H2S

Hydrogen (H2) 0- 40, 000 ppm 1% LEL (400 ppm)

Hydrogen Cyanide (HCN) 0- 30 ppm 0.1 ppm

Hydrogen Sulfide (H2S)0- 100 ppm 0.1 ppm

0- 500 ppm 0.5 ppm

LIE (Explo) - infrared (LEL-IR) 0-100% LEL 1% LEL

Oxygen (O2) 0- 25 % vol 0.1% vol

VOC (PID) 0- 6, 000 ppm0.1 ppm (0- 100 ppm)

2 ppm (100-6,000 ppm)

Sulfure Dioxide (SO2) 0- 100 ppm 0.1 ppm

Ozone (O3) 0- 1 ppm 0.01 ppm

Gas Range Resolution

G7 Insig

ht

G7 Insig

ht with

PTT button

Self-monito

red,

no voice

Self-monito

red,

with voice

SOC monito

ring,

no voice

SOC monito

ring,

with voice

SOC monito

ring, w

ith

voice and PTT button

39



▸


40










Portable area monitors


41








ATEX multigas area monitor


Multi gas detection system: 1 to 5 gasesMain detected gases: AsH3, B2H6, C2H4O, Cl2, CO, CO2, COCl2, F2, H2S, HCl, HCN, HF, N2H4, NO, NO2, NH3, O2, O3, PH3, SiH4, SO2, VOC (volatile organic compounds) & combustible gas (all flammable gases)

Sensors:• Interchangeable pre-calibrated smart bloc without adjustment.• Automatic sensor and parameter recognition (alarms, wear rate…) Power:• NiMH battery pack• Power feeding possible in zones 0, 1, 2Charger:• Integrated and intelligent, powered by 12 / 30VDC or 110VAC, 220VAC• Charge time : 4 hours 30 mn Autonomy:Exemple for EXPLO/O2/TOX1/TOX2 configuration : 100hFunctional check:• Auto zero : when starting the device and on request• Self test at commissioningDisplay: Large backlit LDC display. FLIP FLAP functionAlarm levels:• 2 instantaneous thresholds per channel• ELV / OEL in toxic gas (alarm on sliding average over 15 minutes and 8 hours)• High and low threshold for oxygen (2 optional low thresholds)Indicator light :• 20 ultra-bright LEDs visible in all directions and protected by metal hoops• Bi-directional howler: 103 db to 1m

Programmable inputs/outputs:• 2 inputs: 1 logic input for remote acknowledgment + 1 logic input type "punch" or "alarm report" or "interconnection"• 2 "relay" logic outputs: 1 fault relay output + 1 gas alarm output• 1 specific input / output type: 4-20mA, RS485 ...

Waterproof: IP 66 certifiedSize / Weight: approx. 6,8 kg / L 180 x H 467 x W195Certifications:• II 1GD EEx ia IIC T4• II 2 GD EEx ia d IIC T4 (with CO2 sensor)

The BM25 is a multi gas area monitor, able of monitor up to 5 gases simultaneously, concentrating the benefits of a fixed detector in a transportable device. It is designed to protect intervention or maintenance teams in "gas-risk areas" during development or maintenance work.

� Very powerful audible and visual alarmsThe BM25 construction site area gas monitor features a 360 ° intense flashing light,as well as a 103 dB siren (at one meter). Measurements of ELVs and OELs are available as well as the possibility of recording data over a 4 months period (in a 5 gas configuration).

� A wide range of interchangeable sensorsThe BM25 offers a large range of possible combinations (among 32 interchangeable sensors), which allows it to be used in many activity fields such as petrochemicals, public works, interventions in confined spaces or in wastewater treatment plants.

� Up to 170 hours run time autonomyThe batteries of the BM25 ensure continuous operation for more than 170 hours depending on its configuration, for a recharge time of only 4:30. It is possible to maintain the device’s power charge in zone for permanent use (except alarm) to ensure long-term work (feeding kit).

� Main assets• ATEX multi-gas detector from 1 to 5 gases (depending on gas type)• Wide range of interchangeable gas sensors• Powerful audible alarm (103dB at 1 meter) & 360 ° Flashing lights• Continuous operating autonomy up to 170 hours• Specifically designed to withstand shocks• Easily transportable, less than 7 kilos

Product description

BM25

42








Gas Measuring range Sensor type Reference

CH4 (Methane) 0-100% LEL Catalytique 6313888CH4 (Methane) 0-100% LEL IR 6314064CH4 (Methane) 0-100% LEL IR 6314065C3H8 (Propane) 0-100% LEL IR 6314087C4H10 (Butane) 0-100% LEL IR 6314088CH4 (Methane) 0-100% vol. IR 6314092CO2 (Carbon dioxide) 0-5% vol. IR 6313818AsH3 (Arsine) 0-1 ppm Electrochimical (mini) 6313811Cl2 (Chlorine) 0-10 ppm Electrochimical (mini) 6313809Cl2 (Chlorine) 0-10 ppm Electrochimical (medium) 6313843ClO2 (Chlorine dioxide) 0-3 ppm Electrochimical (mini) 6313841CO (Carbon monoxide) 0-1000 ppm Electrochimical (mini) 6313787CO (Carbon monoxide) 0-2000 ppm Electrochimical (mini) 6313826CO (Carbon monoxide) 0-500 ppm Electrochimical (mini) 6313868CO/H2S (Carbon monoxide/Hydrogen sulphide)

0-1000 ppm (CO)0-100 ppm (H2S) Electrochimical (medium) 6313823

COCl2 (Phosgene) 0-1 ppm Electrochimical (mini) 6313812ETO (Ethylene oxide) 0-30 ppm Electrochimical (medium) 6313821F2 (Fluorine) 0-1 ppm Electrochimical (mini) 6313820H2 (Hydrogen) 0-2000 ppm Electrochimical (mini) 6313803H2S (Hydrogen sulphide) 0-100 ppm Electrochimical (mini) 6313788H2S (Hydrogen sulphide) 0-100 ppm Electrochimical (mini) 6314206HCl (Hydrogen chloride) 0-30 ppm Electrochimical (mini) 6313804HCN (Hydrogen cyanide) 0-30 ppm Electrochimical (mini) 6313805HF (Hydrogen fluoride) 0-10 ppm Electrochimical (mini) 6313806N2H4 (Hydrazine) 0-1 ppm Electrochimical (mini) 6313879NH3 (Ammonia) 0-100 ppm Electrochimical (mini) 6313799NH3 (Ammonia) 0-1000 ppm Electrochimical (mini) 6313800NO (Nitric oxide) 0-300 ppm Electrochimical (mini) 6313802NO (Nitric oxide) 0-300 ppm Electrochimical (medium) 6313856NO2 (Nitrogen dioxide) 0-30 ppm Electrochimical 6313801NO2 (Nitrogen dioxide) 0-30 ppm Electrochimical (medium) 6313857O2 (Oxygen) 0-30% vol. Electrochimical (medium) 6313780O2 (Oxygen) 0-30% vol. Electrochimical 6313817O3 (Ozone) 0-1 ppm Electrochimical 6313807PH3 (Phosphine) 0-1 ppm Electrochimical 6313810PID 0-1500 ppm Electrochimical (medium) 6313998SiH4 (Silane) 0-50 ppm Electrochimical 6313808SO2 (Sulfur dioxide) 0-30 ppm Electrochimical (medium) 6313819SO2 (Sulfur dioxide) 0-100 ppm Electrochimical (medium) 6313822

BM25 area gas monitor (without pump) 6514842-D

BM25 area gas monitor (with pump) 6514872-P

Sensor selection

Unit selection


43








Area gas monitor

Product description

Easily transportable, robust, dust and water proof, the Dräger X-zone® 5500, in association with the Dräger X-am® 5000, 5100 or 5600 gas detectors, can monitor up to 6 gases at the same time. This device is an innovative and powerful concept dedicated to safety: it integrates the handheld personal gas detector into the area gas monitor to form a unique and flexible gas detection system on the go.

� Up to 120 hours of continuous runtime The 24 Ah battery of the X-zone 5500 offers high continuous operation that can last up to 120 hours. Which is equivalent to a complete work week.

� Clear and distinct alarmsA green LED light ring indicates that the environment is safe and free from toxic or combustible gas. When gas or dangerous substances are detected, the LED ring becomes red, providing a visual warning that efficiently indicates dangerous gas presence. At the same time, a high level audible alarm sounds.

� A wireless network of interconnected monitors Up to 25 area gas monitors can be automatically interconnected to create a wireless alarm system. This connectivity of the monitoring devices allows efficient and fast protection on large zones. If one of the monitors dectects gas, it will transmit the signal to all the connected devices. A red master signal blinks on the monitor that detected the gas, in contrast with the other connected devices blinking red and green, thus allowing easy identification of the dangerous area.

� Secured and centralized area gas monitoring The X-zone Com controller was designed to answer the need for centralizing X-zone 5500 area monitors information that are transmitted wirelessly.

The controller can receive and consult data as well as alarm events through the GSM cellular network with data dispatch via SMS, mail or from cloud or FTP service on a PC. Only one X-zone Com module is necessary to transmit the data of the entire chain.

All the relevant information gets to operation managers and directors in a few seconds. It is also possible to display the data concerning all the area gas monitors of a group on a laptop via Bluetooth®.

A data recorder keeps track of the measured values in real time to allow analysis and archive processing of trends and alarm events.

Dimensions (l x h x p) : 490 x 300 x 300 mm Weight: 10 kg (24 Ah battery) Operating conditions: • Max. temperature +50 °C • Pressure 700 to 1 300 hPa• Humidity 10 à 95 % HR Ingress protection: IP 67Alarms:• 360° LED (light ring) • 360° audible alarm, 120 dB at a 30 cm distance• Configurable alarms : profile, frequency & volumes Operating signal: Status light (360°), light ring (LED) Autonomy: Approx. 120 hours (24 Ah battery) depending on installed sensors and status light configurationCharge time: Approx. 14 hFlexible power source: external battery charger 100 – 240 V (universal) or wireless induction charger Pump operation: hose maximum length: 45 m, 30 m for zone 0 Alarm output: Dry contact for intrinsically safe electric circuit (6 poles); < 20 V to 0,25 A (0,15 A constant current); Certifications:• ATEX : I M1 Ex ia I Ma II 1G Ex ia IIC T3 Ga II 2G Ex ia d IIC T4 Gb • IECEx : Ex ia IIC T3 Ga Ex ia d IIC T4 Gb Ex ia I Ma• CSA/US : Class I, zone 0, A/Ex ia IIC T3/Ga Class I, zone 1, A/Ex ia d IIC T4/Gb)

Caractéristiques techniques

X-zone® 5500

44








Gas Measuring range Resolution Reference

Amine • • 0 - 100 ppm 1 ppm 68 12 545Cl2 • • 0 - 20 ppm 0.05 ppm 68 10 890CO • • 0 - 2 000 ppm 2 ppm 68 11 882CO / 5 years lifetime • • 0 - 2 000 ppm 2 ppm 68 11 212CO / H2 conpensated • • 0 - 2 000 ppm 2 ppm 68 11 950CO / Hight concentration • • 0 - 10 000 ppm 5 ppm 68 12 010

CO / H2S • • 0 - 2 000 ppm CO0 - 200 ppm

2 ppm 1 ppm 68 11 410

CO2 (electrochimical) • • 0 - 5 %/vol. 0.1 %/vol. 68 10 889CO2 (IR) • 0 - 5 %/vol. 0.01 %/vol. 68 10 190COCl2 • • 0 - 10 ppm 0.01 ppm 68 12 005Ex (catalytique) • 0 - 100 % LEL 1 % LEL 68 12 950Ex (IR) • 0 - 100 % LEL 1 % LEL 68 12 960

Ex (IR) / CO2 (IR) • 0 - 100 % LEL0 - 5 %/vol.

1 % LEL0.01 %/vol. 68 12 370

H2 • • 0 - 2 000 ppm 5 ppm 68 12 025H2 / Hight concentration • • 0 - 4 %/vol. 0.01 %/vol. 68 10 883H2S • • 0 - 200 ppm 1 ppm 68 10 213H2S / 5 years lifetime • • 0 - 200 ppm 1 ppm 68 11 525H2S / Low concentration • • 0 - 100 ppm 0.1 ppm 68 12 015H2S / Hight concentration • • 0 - 1 000 ppm 2 ppm 68 09 170H2O2 • 0 - 20 ppm 0.1 ppm 68 09 140HBr • 0 - 30 ppm 1 ppm 68 09 140HCl • 0 - 30 ppm 1 ppm 68 09 140HF • 0 - 30 ppm 0.66 ppm 68 09 140HNO3 • 0 - 30 ppm 1 ppm 68 10 887HCN • • 0 - 50 ppm 0.1 ppm 68 13 165HCN • • 0 - 50 ppm 0.5 ppm 68 09 190N2H4 • 0 - 5.0 ppm 0.1 ppm 68 10 888NH3 • • 0 - 300 ppm 1 ppm 68 11 545NO • • 0 - 200 ppm 0.1 ppm 68 10 884NO2 • • 0 - 50 ppm 0.1 ppm 62 12 600NO2 / Hight concentration • • 0 - 50 ppm 0.02 ppm 68 12 881O2 • • 0 - 25 %/vol. 0.1 %/vol. 68 12 211O2 / 5 years lifetime • • 0 - 25 %/vol. 0.1 %/vol. 68 12 385O2 • • 0 - 100 %/vol. 0.5 %/vol. 68 12 005O3 • • 0 - 10 ppm 0.01 ppm 68 12 535Odorant • • 0 - 40 ppm 0.5 ppm 68 11 530OV • • 0 - 200 ppm 0.5 ppm 68 11 535OV-A • • 0 - 200 ppm 1 ppm 68 10 886PH3 • • 0 - 20 ppm 0.01 ppm 68 12 020PH3 • • 0 - 2 000 ppm 1 ppm 68 09 140POCl3 • 0 - 30 ppm 1 ppm 68 10 885SO2 • • 0 - 100 ppm 0.1 ppm 68 10 885

Sensors references

X-am 5100 (1 gas)

X-am 5000 ( 5 gas)

X-am 5600 (6 gas)

45








Area gas monitor

Product description

Area monitors need two things to be efficient: precise sensor technology to detect hazardous gases and the robustness to withstand long outdoor deployments.

With the Radius BZ1, all critical technology pieces such as sensors, software, pumps, and wireless, are part of the patented SafeCoreTM module.

Smart sensors are positioned face down to prevent the elements from interfering with gas readings, resulting in fewer false alarms.

The module slides out from the Radius BZ1 base for easy docking and automated maintenance, ensuring that your sensors are always ready to provide accurate gas detection.

The Radius BZ1 base is made of a durable, weather-resistant plastic. The base has built-in audio and visual alarms that grab workers attention, even in high-noise environments.

A large battery keeps the unit working as long as you do, and side-grip handles help make the base easy to move from location to location.

The Radius BZ1 is available with optional LENS Wireless. With the LENS Wireless technology, your devices will connect once being turned on—with no need for setup or additional infrastructure.

You will instantly receive real time gas readings from other connected instruments on the network, helping your team react faster in emergency situations.

No wires: optional LENS Wireless proprietary mesh network • Frequency: ISM license-free band (2.4 GHz) • Max Peers: 25 devices per network group, 10 independent confi-gurable network groups• Range: 300m (approx. 1,000 ft) line of sight • Encryption: AES-128 • Certifications: FCC Part 15, Others

Sensors: Up to 6 sensors (catalytic bead, photoionization detector, and electrochemical)Up to 7 simultaneous readingsDisplay: 11.2 cm (4.4 in) monochrome backlit liquid crystal display (LCD). Impact-resistant polycarbonate alloysPower source & run time:Rechargeable nickel-metal hydride (NiMH) battery pack• 7 days (168 hours) typical at 20 ºC, without pump, wireless• 3.5 days (84 hours) typical at 20 ºC, with pump, wireless• 30 days (720 hours) typical at 20 ºC, electrochemical sensors only, without pump, wireless≤8 hours recharge timeAlarms:• 108 decibel (dB) at 1 m (3.3 ft) redundant audible alarms• Redundant, visual alarm LEDs (red and blue)Data log: At least 3 months at 10-seconds intervalsHousing: shock-proof polycarbonate alloyDimensions / Weight: 29 x 29 x 55 cm / 7,5 kg (16,5 lb)Ingress protection: IP66Temperature range: -20 °C to 55 °C (-4 °F to 131 °F)Humidity range: De 15 % à 95 % sans condensation (continue) Pump: Optional integral pump, up to 30.48 m (100 ft) sample drawCertifications:• UL: Cl I, Div 1, Gr A, B, C et D, T4• Cl 1 Zone 0 AEx da ia IIC T4 Ga1• CSA: Cl I, Div 1, Gr A, B, C et D, T4• C22.2 No.152 applies only to %LEL thermocatalytic measure • ATEX: Ex da ia IIC T4 Ga, Equipment Group and Category II 1G• IECEx: Ex da ia IIC T4 Ga


Radius BZ1

46








Gaz Plage de mesure Référence

NH3 (ammonia) 0 to 500 ppm 1 ppm 17156650-6CO (carbon monoxide) 0 to 1 500 ppm 1 ppm 17156650-1CO high range (carbon monoxide) 0 to 9 999 ppm 1 ppm 17156650-HCO / H2 low (carbon monoxide) 0 to 1 000 ppm 1 ppm 17156650-G

CO (carbon monoxide) /H2S (hydrogen sulfide)

0 to 1 500 ppm0 to 500 ppm

1 ppm0,1 ppm

17156650-J

CO2 (carbon dioxide) 0 to 5 % vol. 0.01 % 17156650-QCl2 (chlorine) 0 to 50 ppm 0,1 ppm 17156650-7H2 (hydrogen) 0 to 2 000 ppm 1 ppm 17156650-CH2S (hydrogen sulfide) 0 to 500 ppm 0,1 ppm 17156650-2HCN (hydrogen cyanide) 0,4 to 30 ppm 0,1 ppm 17156650-BNO2 (nitrogen dioxide) 0 to 150 ppm 0,1 ppm 17156650-4O2 (oxygen) 0 to 30 % vol. 0,1 % 18109474-3SO2 (sulfur dioxide) 0 to 150 ppm 0,1 ppm 18109476-5

Références cellules

• Monitor up to seven gases using 15 sensor options including PID• Longest running area monitor with a usual run time of 7 days (168 hours)• Built in external safety power supply can extend battery to over 1 month• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments• Largest display compared to any area monitor on the market• Intuitive text-based navigation and configuration• Customizable alarm action messages such as “EVACUATE” or “VENTILATE”• Preset LENSTM Wireless communication requires no setup or additional infrastructure• All-weather sensor deployment and 360-degree gas path for more accurate monitoring

RADIUS BZ1 ASSETS

Résolution

47








Connected Area Gas MonitorG7 EXO

Product description

The G7 EXO area gas monitor is the first area monitoring device connected to the cloud with integrated 2G / 3G / 4G communi-cation. It automatically connects to the Blackline Safety cloud network and continuously transmits critical site safety information such as gas detection alarms.

With its aluminum structure, the G7 EXO area gas monitor is designed to withstand the most difficult conditions while remaining easy to transport use and. A powerful alarm and a series of LEDs communicate the events to personnel around it, while simultaneously transmitting the alert via the Blackline Safety cloud network to other connected devices.

� The most powerful area gas monitor on the marketAble to detect up to 5 gases simultaneously and with a record autonomy of over a 100 days, it has 2 potential free contacts for additional servo-controls (additional signals, start of forced venti-lation, power stop, etc.)

A latch on the front of the G7 EXO area gas monitor activates a "Man in distress" alarm and instantly informs the security control center and all connected group peers. The reduced decision chain and the geolocation of the alert allow faster and safer intervention in the event of significant risk.

� New generation area monitoringThe G7 EXO area gas monitor automatically generates smart zones, sector specific areas to transmit alerts to carriers working in the zone without interfering with other sectors.

� Blackline Live online applicationBlackline Live is a portal hosted online, it is highly customizable so that it can be adapted to the needs of each specific feature and customer requirements. This application includes an interactive map, the employee directory, user roles, alert management, device configurations, alert and report settings.

Gas cartridges specifications• Available gas sensors: Cl2, ClO2, CO, CO2, H2, H2S, HCN, NH3, O2, O3, SO2, explosive gases and VOCs (Volatile organic compounds)• Threshold overshoot alerts (2 thresholds)• TWA alerts (Time Weighted Average)• STEL alert (Short Term Exposure Limit)• Reliability test and calibration notification

User InterfaceDisplay: 8-color active matrix liquid crystal display, 480x640 pixelsMenu system: three-button keypadEmergency latch: send an emergency alertMultilingual assistance: EN, FR, SP, GE, IT, NL, PT

User notification360-degree visible light indicators• Green connectivity indicator: flashing (powered) / conti-nuous (connected)• Yellow indicator: pending and warning alerts• Red indicator: alert communication• Blue indicator: alert acknowledgment confirmation• Alarm sound level: 100 dB at 30 cm• Two-way voice call sound level: 95 dB at 30 cm

HousingCase material: Robust aluminum and plastic housing with rubber bumperDimensions: 385 mm x 188 mm x 220 mmWeight: 9,5 kg


48








Gas Resolution

Ammonia Electrochemical 0-100 ppm NH3 0,1 ppm

High content ammonia Electrochemical 0-500 ppm NH3 1 ppm

Chlorine Electrochemical 0-20 ppm Cl2 0,1 ppm

Volatile organic compounds (VOCs) PID lamp 0-10,000 ppb* Dynamic resolution *

Volatile organic compounds (VOCs) PID lamp 0-4,000 ppm* Dynamic resolution *

Hydrogen cyanide Electrochemical 0-30 ppm HCN 0,1 ppm

Nitrogen dioxide Electrochemical 0–50 ppm NO2 0.1 ppm

Carbon dioxide Infrared 0-50 000 ppm CO2 50 ppm

Chlorine dioxide Electrochemical 0-2 ppm ClO2 0,01 ppm

Sulphur dioxide Electrochemical 0-100 ppm SO2 0.1 ppm

Explosive gases Infrared 0-100 % LEL 1 % LEL

Hydrogen Electrochemical 0-40 000 ppm H2 1 % LEL (400 ppm H2)

Carbon monoxide Electrochemical 0-500 ppm CO 1 ppm

Carbon monoxide / Hydrogen sulfide Electrochemical 0-500 ppm CO, 0-100 ppm 1 ppm CO / 0,1 ppm H2S

High content carbon monoxide Electrochemical 0-2000 ppm CO 5 ppm

Hydrogen resistant carbon monoxide Electrochemical 0-500 ppm CO 1 ppm

Oxygen Electrochemical 0-25 % vol O2 0,1 % vol

Ozone Electrochemical 0-1 ppm O3 0,01 ppm

Hydrogen sulfide Electrochemical 0-100 ppm H2S 0,1 ppm

High content hydrogen sulfide Electrochemical 0-500 ppm H2S 0,5 ppm

List of detected gases

Measuring rangeSensor type

� Wireless cellular radioCoverage: Over 100 countries and over 200 operatorsEurope: 2G / 3G or 2G / 4GNorth America: 2G / 3G or 3G / 4GAustralia / New Zealand: 2G / 3G or 3G / 4GAntenna: Optimized for the region

� Wireless updatesDevice configuration changes: yesDevice firmware update by radio link: yes

� Location technology Radio GPS: 48 channels with high sensitivity Assisted GPS: yesGPS accuracy: ~ 5 m (16 ft) outdoors in open fieldArea gas monitor radio locator: Yes, Blackline's exclusive locator area gas monitor technology and site floor plans

� Wireless satellite radio optionSupplement that can be added by the user: yesNetwork: Iridium, global coverage

The G7 EXO gas detection monitor offers unrivaled zone control and monitoring in a robust system that is easy to use and deploy.

All information is instantly brought up on a portal for optimum monitoring and security. The configuration parameters or the gas alarm thresholds can be modified at any time in a few seconds by radio link without on site intervention.

Communication technical specifications

Options & Accessories

• 4-channel sampling period• Solar panel for continuous monitoring• Mounting accessories (wall mounting, tripod, anti-tip, magnetic and on rail / scaffolding)

An interconnected network

The G7c is the only ATEX zone 0 portable device to be able to offer both a complete PASS (lone worker alert device) with a gas detector (single or multi gas) and a walkie-talkie (real-time dialogue).

Like the G7 EXO gas detection monitor, it works in multi-operator 2G / 3G connectivity to inform and protect personnel working in at risk areas in real time. On the same principle as telephony, the Blackline G7c works on the principle of a subscription from 1 to 5 years with a whole of service panel adapted to each need.

Offering professional security monitoring and emergency response management services for field teams, Blackline's security operations center is on call 24/7. At the same time, it is entirely possible to manage alarms internally or with another remote monitoring partner.

The G7c gas detector with geolocated PTI

* Depends on the correction factor

49



▸


50










Breathalizers &drug tests


51








Electronic breathalyzer for consumer useDräger Alcotest® 3820

Product description

The Dräger Alcotest®3820 offers responsible drivers a reliable way to test their alcohol concentration in exhaled air. Choose a real Alcotest®! Use the know-how of the same manufacturer sup-plying the French police, operating over 30 million breath alcohol tests per year. Poven precision for 60 years: device derived from the one used by the police with the same technology.

� Fast and easy sampling

The measuring function simply activates with the backlit opera-ting button. An optional beep tone makes it even easier to use. The device is ready to use in seconds and the alcohol test can be done immediately. The same button is used to navigate the menu.

� Replaceable mouthpiece

Protected by a cap, the mouthpiece is intuitively placed. A new tip has to be used for each person tested. Additional mouthpieces are available as accessories. Exhaled air goes through the device through the air duct, and only a sample of that air is analyzed.

This ensures the absence of residual alcohol in the device, as well as the accuracy and reliability of measurements. It is the same method used by the police. Delivered with 5 spare mouthpieces packed in individual hygienic packaging.

Measurement principle:Dräger Sensor 1/4 "electrochemical sensor; specific to alcoholMeasuring range : 0 to 5.00 ‰; a message is displayed if measuring range limits are reached

Sampling : automatic sampling once the minimum volume or breath time has been reached; automatic withdrawal at the end of the expiration; depending on the configurationReady to use : about 4 seconds after it startsMeasurements display : after about 3 s (at 0 mg / L); after about 10 s (at 1.00 ‰ at room temperature) Operating temperature : -5 to +50 °CRelative humidity : 10 to 100% relative humidity (without condensation and in working condition)

LCD display : backlit; 32 x 22 mm (128 x 64 pixels) LED: 1 light-emitting diode (LED) for additional results indication and warning messagesAudible signals : various audible signals in parallel with displayed messages and warningsData logger : last 10 testsPower supply : 1 x battery CR123A, on-screen charging status display; a full battery can perform around 1,500 alcohol testsMouthpiece : in individual hygienic packagingCalibration : calibration with wet or dry gasHousing: ABS/PC shock resistantDimensions (W x H x D) : approx. 50 x 133 x 29 mm Weight : approx. 130 g, battery included


In accordance with the French Labor Code (Article L232-2), alcohol and drun-kenness are prohibited in the workplace.

The Ministry of Labor authorizes the use of breatha-lyzers to stop dangerous situations related to alcohol.

In accordance with the French Driving Code (Article L.234), driving a vehicle under alcohol influence is punishable by a fine as is:

• Blood alcohol level equal to or greater than 0.20 grams per liter (ie 0.10 mg / l of exhaled air) for public transit vehicles.

• Blood alcohol level qual to or greater than 0.50 grams per liter (ie 0.25 mg / l of exhaled air) for other categories of vehicles.

52








Professional breathalizerDräger Alcotest® 5820

Product description

The sophisticated product design of the Dräger Alcotest®5820 meets the requirements for performing a breath alcohol test qui-ckly, easily and hygienically.

It is also possible to measure alcohol in the ambient air (passive), in which case a mouthpiece isn‘t required.

The device is ready to use within seconds. The shape of the Slide‘n‘click mouthpiece allows you to intuitively fit it correctly, even in the dark. The Dräger Alcotest® 5820 is ready to use again immediately after changing the mouthpiece.

Une fois l’embout buccal remplacé, le Dräger Alcotest®5820 peut être réutilisé immédiatement.

Slide‘n‘click mouthpieces

Available in 100, 250, and 1000 mouthpieces packs, with or without one-way valves. One-way valves prevent any crossed contamination.

Measurement principe: Dräger Sensor 1/4 "electrochemical sensor; specific to alcohol Measuring range: 0 to 2,5 mg/l ; a message is displayed if measuring range limits are reachedStandard sampling: automatic sampling once the minimum volume or breath time has been reached; Possible passive sampling without mouthpiece or manual initiation of sampling.Ready for use: approx. 2 s after switching onMeasurements display: environ 3 After approx. 3 s (at 0 mg/L); after approx. 10 s (at 0.5 mg/L, room temperature) Écran graphique LCD display: backlit LCD display; 32 x 22 mm (128 x 64 pixels) LED: 2-colour, to support results display and warning messagesAudible signals: Different signal tones to support display messages and warningsData logger: Storage of the last 100 tests with test numbersPower supply: 1x CR123A battery, affichage de l’état de charge à l’écran. on-screen charging status display; a full battery can perform around 1,500 alcohol testsMouthpiece adaption: Improved Slide’n’click mouthpiece attachment; can be fitted for right or left orientationMouthpiece: in individual hygienic packaging, sfae, with safe airHousing: ABS/PC shock resistantCompliance: EN 15964, NHTSA, FDA


Part Number Mouthpiece without one-way valves

68 10 690 100 units package



� Calibration éthylotest

GazDetect offers a full range of ethanol gas mixtures to meet any requirements for alcohol screening devices and interlock systems.

These mixtures are produced in compliance with current most demanding standards and fits in any handheld equipment and interlock system..

� Dimensions & WeightApprox. 50/60 x 141 x 31 mm & approx. 150 g with battery

53








Alcohol screening deviceAlcotest® 5000

Product description

The Dräger Alcotest® 5000 is an exhaled air alcohol testing device for professional use. This ultra-fast breathalyzer can do many tests in record time.

Especially designed to minimize exhaled air backlash, the device reduces contamination risks with subsequently tested subjects.

� An innovation born from tradition

With over 65 years of experience, Dräger is the international lea-der in the breath alcohol testing field. In many countries around the world, law enforcement officers use devices from the Alcotest range daily in the context of driving alcohol testing.

Manufactured in Germany, the Alcotest® 5000 is compliant with the strictest standards. The device exploits highly efficient EC sen-sors that guarantee precise and reliable results.

� Fast and precise alcohol consumption test

The test doesn’t require any physical contact with the controlled subject. The test simply requires the subject to blow exhaled air into a cone, there’s no need to add or to remove any mouthpiece on the device.

Thanks to its unique design, the cone of the Alcotest® 5000 avoids any exhaled air to rise up again, thus eliminating the cross conta-mination risk with previous subjects. After use the cone is easy to replace to guarantee impeccable hygiene.

� Maximum testing in minimum time

The Alcotest® 5000 can test up to 12 subjects per minute. For law enforcement officers or private security contractors, control alco-hol consumption on many subjects in a limited time is a major challenge.

For example it can be necessary in high affluence operations like controlling access to the workplace, to stadiums, in public transit or in airports. In case of positive control, the exact blood alcohol rate can be given with another device that provides measure-ments with legal value, or use another Dräger device.

� Easy and convenient alcohol test

With its easy use thanks to its « OK » button, the Alcotest 5000 embodies the last generation of alcohol screening devices from Dräger - highly recognized manufacturer for their product’s effi-ciency and simplicity.

Two arrow buttons allow easy menu navigation, for example to consult the last test results, reset the test meter, verify the calibra-tion date or change the language. Icon instructions are displayed on the test for easy use.

Measuring range:• 0 to 0,029 mg/l « V » symbol on the screen + green LED means no alcohol detected• Starting at 0,030 mg/l « X » on the screen + red LED means alcohol detected• Starting at 2,5 mg/l The measurement threshold is reached ( ).Start-up time: 4 s after ignitionTest result display time: • Approx. 2 seconds from 0 to 0,029 mg/l• Approx. 6 seconds for 0,5 mg/l in ambient temperature

Sampling cone: Hygienic, individually packaged, and designed to reduce blowback.Measurement technology: Dräger special alcohol electroche-mical sensorDisplay: Backlit liquid crystal panel 32 x 22 mm Signals:• 2 colors to highlight test results and alert messages• Different tones to go with messages and alarms Memory: Records the 500 last test results with number date and time Power supply: 3 AA batteries provide power to proceed to over 5000 tests (battery indicator displayed on screen)

Housing: shock resistant PC-ABS casingDimensions (l x h x w) / weight: 63 x 219 x 41 mm/approx. 245 gr Marking: CE Directive CEMHumidity: 10 to 100 % relative humidity without condensation while operating


54








Drug testing solutionDräger Drugcheck® 3000

Product description

The compact and quick saliva based drug test delivers reliable hygienic results easily. The drug test kit does not require electricity and can therefore be used anywhere.

� Obtain samples easily and safely

The Dräger DrugCheck® 3000 consists of two components: an absorbent collector for obtaining a saliva sample, and a test cas-sette for the analysis. The test cassette contains the buffer liquid and a window with two test strips, which displays the control and test lines.

The drug test itself is performed in three easy steps: swab the saliva sample, shake the test kit, wait for a brief incubation period, and then start the test. A color indicator on the swab disappears as soon as it has absorbed enough oral fluid for a test.

As soon as the control lines appear in the window, you can read the results. If the test result is negative, a line will appear alongside the respective substance class (drug). This means that none of the targeted substances were detected in the sample. If a line fails to appear next to one of the substance classes, then the result for this substance is positive (reverse reading).

� Fast and sensitive drug analysis

Check individuals for up to five substance classes simultaneously with the Dräger DrugCheck® 3000: cocaine, opioids, ampheta-mine, methamphetamines/designer drugs (e.g. Ecstasy) and cannabis (THC).

Of all the substance classes listed, cannabis is the drug consumed most frequently and the most difficult of all compounds to iden-tify (THC).

This is why the Dräger DrugCheck® 3000 was optimized to detect THC, and now offers two measurement options: based on a chosen pre-incubation time, there is a fast option (with a higher threshold) or a more sensitive option (with a lower threshold).

The entire drug test only takes 3 – 5 minutes.

Test for detecting drugs in oral fluid. The Dräger DrugCheck® 3000 detects the following substances:• Cocaine (COC)• Opioids (OPI)• Cannabis (THC)• Amphetamines (AMP)• Methamphetamines (MET)

Dimensions (W x H x L) / Weight: 32 x 111 x 57 mm / <30 gOperating range: Operation: 5 °C to 40 °C at 5 % to 95 % relative humidityStorage / transportation: 4°C to 25°CTime of measurement: • fast measurement: analysis < 3 minutes• Sensitive measurement: analysis < 5 minutes

Selection of the measurement mode: depending on the selected pre-incubation time and the desired THC threshold, for faster or more precise reading.

Certifications / standards: Licensed as a medical product within the EU in accordance with Directive 98/79/EC on in vitro diagnostic medical devices (IVD). Outside of the European Union for non-me-dical use (Non-IVD) or for forensic use (only USA)

Technical features

55



▸


56










57

Non

-con

trac

tual

doc

umen

t. ©

Any

repr

oduc

tion,

in w

hole

or i

n pa

rt, b

y w

hats

oeve

r pro

cess

, is o

nly

perm

itted

with

Gaz

Det

ect a

ppro

val.

• Ja

nuar

y 20

20






Documents

PORTABLE GAS DETECTORS...Tru Pointe IR Description du produit The Tru Pointe IR is a refrigerant gas leak detector that uses a long-life infrared sensor in a housing to effectively