PORTABLE GAS DETECTORS

GAS / FLAME DETECTION GAS / DUST MONITORING

Portable single gas detectors:

Explosimetres range Toximetres and Oxygenometres range

EX 2000 GDP 2000 EX 2000C

TX 2000 TX 2000 +

C 2000

RX 500Pump BP2000

PORTABLE EXPLOSIMETRES

POCKET SIZE:237 cm3

The 2000 range: DESCRIPTION

EX 2000C

PLUG IN / TOP MOUNTED SENSOR

LARGE DISPLAYWITH PICTOGRAMS

USERFRIENDLY KEYBOARD

CALIBRATION PLUG

BIG FLASHING LED

BUZZER

GDP 2000

HIGH PERFORMANCES

LONG BATTERY LIFE:

- 22h with « NimH »- and 30 hours with dry cell batteries

HIGH PERFORMANCES

CHARGERS:- simple charger (slow charge)=16h

max. - 12VDC charger (DC cable/slow

charge)= 16h max.- « intelligent » two position charger

(fast charge)= 4h max.

MANY FUNCTIONS

FRIENDLY DISPLAY PANEL:

MANY FUNCTIONSVISUAL AND AUDIO GAS ALARMS:- red light flashing- pulsed alarm=1 beep every 2sec.---> AL 1- pulsed alarm=1 beep every 1sec.---> AL 2

VISUAL AND AUDIO FAULT ALARMS:- red light lighting (continous)- battery and sensor faults

MANY FUNCTIONS

AUTO OPERATION STATUS :- auto test when switching on- auto diagnosis- confidence beep- battery and sensor faults:

pictograms displayed

CHARACTERISTICS

EX 2000To measure the explosive gas

concentration:- displays 0 - 100 % LEL

Detects all types of explosive gases

Can be programmed for a selected gas (manual procedure)2 gas alarms

EX 2000CTo measure the concentration (low or

high) of explosive gases:Detect and display low concentration « 0-

100% LEL » = explosimeterDetect and display high concentration 

« 0-100%vol.)= catharometerOnly one detection sensorAutomatic switch over of range (catalytic

or catharomic)

GDP 2000To discriminate between natural gas and

other explosive gas and to DISPLAY the gas concentration

Detect all types of explosive gases with discrimination

displays simple messages for the user: NATURAL GAS or FLAMMABLE GAS

with the gas concentration detected in % LEL.

ACCESSORIES 2000

Chargers :220VAC or 12VCCcalibration kitsampling kittool kitprotective leather kitelectric pump

APPROVALS:2000 range- EEx iad IIC T4 INERIS 98 D 5022 X

surface

- EEx iad I INERIS 98 Y 3001 X mine

with the north American certification:

- ATEX

- Gas distribution companies

- Telecommunications

- Fire brigades

- wastewater stations ….

ELECTRIC PUMP BP 2000

Small sizelight weightEasy to operate (ON/OFF)

allows the detection of gases where it ’s difficult to access.

BP 2000 : description

gas inlet

gas outlet

pression detector

LED + buzzer

electric Pump

Simple charger connection

Bloc of batteries

ELECTRIC PUMP: BP 2000

powered by 3 dry batteries LR6 (1,5V) or rechargeable batteries NiMH

Autonomy:mini 8Hcharger CR2002 =max. charging time: 4Hsimple charger (AC bloc)=max. charging time : 16H

ELECTRIC PUMP BP 2000

Indications : battery defaultflow alarm (pump)(integreted pressure detector). too low pressure(pump used…). too high pressure(outlet closed…)visual and audible alarms (30s to 1mn).

ELECTRIC PUMP BP 2000

T° of using : 10° à 45°CHygrometry: 5% RH à 90%RHindex of protection: IP 66 (exept inlet/outlet of pump)

ELECTRIC PUMP BP 2000

certifications:II 1 GD EEx ia IIC T3 ou T4 (dry batt.)I M1EEx ia Iin accordance with the regulations: CE, CEM et ATEX.

Example: BP 2000 and EX 2000

multigas portable detectors :

MX 2000MX 2000

MX 21 plusMX 21 plus

BM 22 plusBM 22 plus

MX 2100 BM 25

= Certified « ATEX »

MX 2100S

portable multigas detectors:

C 2000

MX 2100

BM 25

MX2100S

ia

Multigas : MX 2100(S)

5 gas simultaneous detectionup to 6 measurement ranges with MX 2100.

4 gas simultaneous detection with MX 2100S .

Multigas : MX 2100(S)

( weight)

Multigas : MX 2100(S)

characteristics

cells

Anti-skid side

Graphical LCD

keypadclip

Carrier belt

95db at 30cm

MX 2100(S) : power supply

*continuouslyType operating time operating time without electric pump with electric* pump

alkaline batteries 24/13 hours 10/7 hoursAAA

NiMH battery 16/9 hours 6/4.30 hours Pack

MX 2100(S) : tactile pad

- Audible alarm acknowledgement- display mode

- LCD: backlighting- parameter display- display of menus

ON/OFF/validation

MX 2100(S) : graphical display

- graphical display for easier measurement readout

- simultaneous display of 5 measurements with MX2100

and 4 measurements with MX2100S

- manual or automatic backlighting

- parameter display.

MX 2100(S):all sensors are pre-calibrated, smart and interchangeable (outside danger area)

big cell

small cells

explo Cell

Standard configuration4 gases detected

Examples of configuration: MX2100

- toxic cells or

- oxygen cell : 1 year life

- catalytic explo cell : 100% LEL or

- explo/catharo cell : 100% LEL/100%volume

- or oxygen cell : 2 years life

- toxic cells (CO/H2S ; SO2 ; CL2 ; CO2/IR)

Examples of configuration: MX2100S

- toxic cells: CO or H2S or

- catalytic explo cell : 100% LEL

- oxygen cell : life time = 2 ans

- toxic cell SO2 or - oxygen cell : 1 year of life time

MX 2100(S): smart blocks

MX 2100(S) : alarms and histograms

InstantaneousSTEL / TLV data

MX 2100(S) : into details

gas alarms :high and low

thresholds for oxygen

1 low threshold for the catharometric channel

types of alarms: alarme 1 : every sec. alarme 2: every 500ms

trouble alarms : 20% over alarm in negative

mode 120% over alarm in tox and

oxygen mode 100% over alarm in explo.

mode.

types of alarms:continous audible

signal common to all channels.

MX 2100(S) : User-friendliness

**variable storage intervals: between 1 sec. and 1 hour- 200000 records (events and measurements)- FIFO

memory saved bya lithium battery

Stored events and measurements

The data-logging function

MX 2100 : User-friendliness

* * pre-programmed list of names( 32 names)

Patrol function

MX 2100 : User-friendliness

Auto zero: on demand

or as a charger output (option)

operating check : audible bip (interval can be set by

Oldham).

Self-diagnostics and any anomalies indication

accessories

Plastic protective case

- charging time = 3 hours max.

Smart charger

Electric pump

Sampling kit

MX2100(S) : portable TEST BENCH « CALCHECK »

MX2100(S) : test terminal

-reference gas injection system to trigger the alarms

- Le MX 2100(S) detects the presence of the terminal anddisplay any faulty channels

- fitted with one or two cylinders.

( 50% LEL CH4 / 15% O2 / 100ppm CO / 1 % CO2 / 20 ppm H2S )

Printout of data

Serial cable (RS232)

Charging or sampling Block

IR module

- Directly linked to a PC:

communication software COM 2100

Serial cable

Charging or sampling Block

IR module

The MX2100(S) can be linked to a PCvia a IR port:

communication software COM 2100

Supervise and maintain the device:

text display of leasurements and channel parameters

troubleshooting if there is a problem

programming of the detector and measurement channel

option management channel calibration via automated

drop-down menu printout of encrypted status sheet

and test sheet management,display and printout

of stored events and measurements

protection by password.

Conformity with ATEX directives:certification

- As per explosive atmospheres (ATEX) directive : 94/9/EC (a very high safety level).

- As per electromagnetic compatibility directive 89/336/EC, standard EN 50270.

portable multigas detectors:

C 2000

MX 2100

BM 25

MX2100S

ISC gas portable detectors

Monitoring Choices

• CO (0 – 1500 ppm)

• H2S (0 – 500 ppm)

– 0.1 ppm resolution

• O2 (0 – 30% by vol)

• NO2 (0 – 150 ppm)

• SO2 (0 – 150 ppm)

www.GasBadge.com

M40

www.GasBadge.com

VX500

PID