Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
BELZONA TRAININGPolymeric Engineering Composites
and Protective Coatings
BELZONA SPECIALISED TRAININGawareness
in t r o d u c t o r y T R A I N ING
BELZONA SPECIALISED TRAINING
VAL IDATED
advan c e d l e v e l c e r t if ic ation
CONTENTS
Welcome to Belzona
Initial Training Seminar
Vessel Linings
Chocking and Shimming
Bespoke Training and Frequently Asked Questions
INTRODUCTION
AWARENESS TRAINING
VALIDATED TRAINING
Our Approach to Training
Machinery and Equipment
Superwrap II
4-5
8- 9
14-15
11
18
6-7
10
16-17
Buildings and Structures
Training Centres
12
19
Flange Face Forming and Nozzle Inserts13
- Jack Hughson, EDF EnergyAttended Building and Structures Awareness Course
- Jimmy Mahood, CAPEAttended Flange and Nozzle Validated Course
Bespoke Training and Frequently Asked Questions
Very informative and helpful, instruction was very
professional, easy to understand, enjoyed the course.
Good practicals and good course knowledge
using real world examples.
- Robert Oldham, Seal & Pump EngineeringAttended Hand-Applied Validated Course
Great course - very well presented
and instructed.
Founded in 1952, Belzona is one of the few global designers and
manufacturers of polymeric composites and coatings offering
top quality materials combined with the technical know-how,
expertise and service required to meet the demands of a
variety of industries.
We specialise in cold-applied, solvent-free materials to offer
solutions to an extensive range of engineering challenges and
repair situations. From full turnkey supply&apply systems to
simple in-situ repairs, our innovative materials provide the
answer to a variety of industrial issues, including erosion,
corrosion, chemical attack, abrasion and wear, water penetration
and weathering. Such is the performance of our materials, many
are now specified for the protection of new equipment.
WELCOME TO BELZONA
International Manufacturing
Facilities
State of the Art Training Centres
Local Supply and Support
Network
David BlackwellEngineering Director, Belzona Polymerics Ltd.
Here at Belzona we believe that training is vital to success. Training
empowers people to meet the demands made of them in the work
environment and prepares them for the unexpected situations that life
will throw at them.
Belzona is excited to announce that we are making substantial
investments in our Global training centres in Thailand, Miami and
the United Kingdom. The newest facility at our UK Head Office in
Harrogate will more than double the current floor space of our existing
training facility and will include a large practical training area with
blasting and spraying facilities together with a practical training/
demonstration classroom and a new fully equipped presentation suite.
OUR APPROACH TO TRAINING
To reserve your place on a training course, contact your local Belzona representative or email:
• Europe and Africa: [email protected]• Americas: [email protected]• Asia Pacific: [email protected]
As a part of our commitment to improving the application standards of Belzona materials globally, Belzona offer a thorough Training Programme to provide experienced applicators with the theoretical and practical knowledge required for achieving effective and consistent application of Belzona products.
THEORETICAL LEARNING
To maximise the time spent gaining hands-on experience, we have
developed an online learning programme. These online pre-requisite
modules allow attendees to understand the theoretical aspects and
test their knowledge prior to visiting a Belzona Training Centre.
AWARENESS COURSES
Held at one of our state of the art Global Training Centres, our
practical training courses provide hands-on experience under
qualified supervision. Whether it is a storage tank, process vessel,
pipe or pump application, we provide rigorous training programmes
for all industrial areas.
VALIDATED COURSES
The Belzona Validated Training Programme has been designed
to test and confirm applicator’s competency. Applicators who
successfully pass the course are issued with a card and certificate,
validating them in the application of associated Belzona systems.
FACILITIES
Belzona has state of the art training facilities around the world,
in which we guarantee that our training is delivered to the
highest standards. The courses have been developed following
internationally recognised Engineering Standards.
BELZONA SPECIALISED TRAINING
awareness
in t r o d u c t o r y T R A I N ING
INITIAL TRAINING SEMINAR
This course is aimed at Belzona Consultants and Sales personnel that represent our Global Distribution
network. This five-day course furnishes attendees with the skills required to specify the right Belzona solutions,
sell their unique features and benefits to clients and gives an overview of the simple application techniques
that makes Belzona materials the global first choice
Classroom and lab based activities include topics such as:
• Training on the basic modes of damage which
Belzona products strive to repair and resist
• Understanding of polymeric materials, surface
preparation and inspection of coatings, backed up
with practical exercises
• Introduction to the primary Belzona product ranges
as well as in-depth discussions on the key products
within each range
• Live product demonstrations where attendees
will mix and apply Belzona materials under the
guidance of application experts
• Sales techniques developed and proven by
successful Belzona salespersons incorporating
years of experience
• Other modules include Belzona literature and
tools, practical mathematics, and building
effective relationships with clients
AWARENESS TRAINING COURSE
This one-day event provides an overview, specific to repair and
protection of machinery and equipment using Belzona systems.
Areas covered include surface preparation, rotating equipment,
fluid handling equipment, metal repair materials and elastomeric
repair materials. The training event is practically focused and
aimed at asset owners, contractors and applicators that will carry
out these repairs.
BELZONA SPECIALISED TRAINING
awareness
in t r o d u c t o r y T R A I N ING
MACHINERY AND EQUIPMENT
BELZONA SPECIALISED TRAINING
awareness
in t r o d u c t o r y T R A I N ING
CHOCKING AND SHIMMING
APPLICATOR TRAINING COURSE
The 1/2 day training course furnishes attendees with the skills required to
install Belzona 7111. On completion of a series of practical demonstrations,
attendees are required to chock an example piece using Belzona 7111.
A theoretical exam will also be completed by all attendees to ensure
thorough understanding of the training material.
DESIGNER TRAINING COURSE
Where required, an additional one day designer training course is
available which provides attendees with the knowledge to calculate
and design a successful system in accordance with the DNV GL
classification society requirements.*
*Required Pre-requisites:• Attend and complete the Application Training Course• Practical mathematics
AWARENESS TRAINING
This one-day event covers the repair and protection of
buildings and structures using Belzona systems.
Areas covered include surface preparation, fabric
maintenance of roofs, walls and floors, as well as other
common problem areas in building maintenance. This
practical course is aimed at asset owners, contractors
and applicators that carry out these repairs.
VALIDATED TRAINING
This two-day Validated Training course follows on
from the Awareness Training. It provides additional in-
depth information, technical understanding, hands on
training as well as qualification and certification.
The course focuses on surface preparation methods
along with the wide range of Belzona systems,
such as Belzona 3000 Polymeric Membranes, 4000
Construction Polymers and the 5000 Environmental
Barrier systems.
BELZONA SPECIALISED TRAINING
awareness
in t r o d u c t o r y T R A I N ING
BELZONA SPECIALISED TRAINING
VAL IDATED
advan c e d l e v e l c e r t if ic ation
BUILDINGS AND STRUCTURES
BELZONA SPECIALISED TRAINING
VAL IDATED
advan c e d l e v e l c e r t if ic ation
FLANGE FACE FORMING AND NOZZLE INSERTS
Our unique technique for the restoration of flange faces and protection of small bore nozzles
using Belzona’s robust materials is delivered as a one day validated training course. Both
technologies are covered in detail including theoretical presentations, detailed practical sessions
and an examination to prove competence and gain validation. These courses can be offered as
individual half day events if required.
FLANGE FACE FORMING TRAINING COURSE
During the course, applicators will be shown how to carry out this repair using a simple forming
technique with either a rebated former or a duplicate flange with shims. Attendees are then
required to repair a flange according to Belzona’s standard for flange face forming using
techniques learnt during the course.
NOZZLE INSERT TRAINING COURSE
Attendees will gain knowledge and skills required to bond prefabricated Belzona inserts into
small bore nozzles. Attendees will dry-fit and then apply a full Belzona nozzle insert system.
Upon the product reaching its full cure, this is then removed and inspected in order to check for
misses or incorrect application techniques.
BELZONA SPECIALISED TRAINING
VAL IDATED
advan c e d l e v e l c e r t if ic ation
VESSEL LININGS
HAND APPLIED COATINGS TRAINING
This training course is designed for applicators who will
apply Belzona materials using hand tools and covers
surface preparation, quality control, pit filling, stripe coating,
application and inspection of coatings. This is a very thorough
practical course with validation being determined by the
completion of a coated panel within predefined criteria.
SINGLE COMPONENT AIRLESS SPRAY TRAINING
This course qualifies experienced applicators in the
intricacies of spraying Belzona products using single
component heated airless spray equipment. This is a highly
technical course which includes theoretical and practical
elements including application technique, equipment
maintenance and troubleshooting.
PLURAL COMPONENT AIRLESS SPRAY TRAINING
Available as a standalone course for technicians
previously qualified in the use of Belzona products with
single component airless spray equipment. Training
includes the use and efficient running of a Belzona spray
application using plural component equipment.
SPIN SPRAY AND LININGS TRAINING
Available as an addition to either of the above spray
training courses. Designed for technicians qualified on using
Belzona products with single or plural component airless
spray equipment, we provide training on the use of Belzona
products with spin spray pipe lining equipment. Training
covers metering, application setup and technical aspects of
applying pipe linings using airless spin spray equipment.
BELZONA SPECIALISED TRAINING
VAL IDATED
advan c e d l e v e l c e r t if ic ation
BELZONASUPERWRAP II
BELZONA SUPERWRAP II INSTALLER TRAINING COURSE
This course provides the experienced
applicator with the specific theoretical
knowledge and practical skills required
to effectively apply a Belzona composite
pipe repair system compliant to ISO/ASME
standards. Trainees complete pre-requisite
modules before carrying out repairs at a
Belzona Training Centre.
*Required Pre-requisites• Minimum of 18 years of age • Two years of application experience using composite materials• Complete and pass all set online pre-requisite modules
BELZONA SUPERWRAP II SUPERVISOR TRAINING COURSE
Also in full accordance with the associated
standards, the Supervisor training course
provides the additional information and
knowledge required to supervise installations
of Belzona SuperWrap II on to Class 2 and
Class 3 type repairs. Theoretical and practical
sessions are capped off with an examination.
Full validation also requires supervision of a
Belzona SuperWrap II project.
*Required Pre-requisites• Completion of Belzona SuperWrap II Installer Training
Course
BELZONA SUPERWRAP II DESIGNER TRAINING COURSE
Designers are trained to apply
the technical criteria associated
with piping system parameters to
create wrap designs from scratch.
The training covers the design
methodology for each defect type
and geometry.
Pre-Requisites• Attendance on an invitation only basis
BESPOKE TRAINING
FREQUENTLY ASKEDQUESTIONS
TAILORED TRAINING COURSES ARE AVAILABLE ON REQUEST
We regularly carry out bespoke training courses on certain
Belzona applications. To request a tailor-made course,
please let us know what your objectives are, how many
people would like to attend as well as preferred dates.
1. WHERE CAN I SEE SCHEDULED TRAINING COURSES?
The training calendar is available via bel.belzona.com under “Training
Tools/ Upcoming Trainings”. If you don’t have access to the BEL, please
get in touch with your local representative.
2. HOW LONG DO THESE COURSES LAST?Course lengths depend on the types of course. Initial Training Seminar
typically lasts for five days, whereas “Flange Face Forming” is a half-day
course.
3. ARE ALL COURSES DELIVERED IN ENGLISH?In addition to English courses we also now offer courses in several
languages. Contact your local representative for more information.
4. HOW MUCH DOES IT COST TO ATTEND?The costs associated with attending Belzona training courses depend
on the course and the training centre. Please contact your local
representative for further information. We are also happy to offer advice
and company rates on travel and accommodation.
Supporting business in the Europe and Africa, our
Harrogate HQ hosts our main manufacturing centre,
Research and Development laboratory and a state-
of-the-art training facility.
From our Miami HQ we support Latin and North
American operations. Our facility houses a
manufacturing and training centre as well as a brand
new Research and Development laboratory.
Our office in the region of Laem Chabang has
expanded into a highly developed training facility
over the years. Here we host training courses for
visitors from Asia Pacific and Middle East.
Belzona Polymerics Ltd Harrogate, UK +44 1423 567641 [email protected]
Belzona Inc Miami, Fl, USA +1 (305) 594-4994 [email protected]
Belzona Asia Pacific Chonburi, Thailand +66 38 491031 [email protected]
TRAINING CENTRES
www.belzona.com
ISO 9001:2008Q 09335ISO 14001:2004EMS 509612
Belzona products are manufactured under an ISO 9000 Registered Quality Management System
Copyright © Belzona International Limited 2017 ZCORPTRAINING(E)12/17