CAPITOL COATNGS POLSKA Sp. z o. o.

www.capitolcoatings.pl

Polyaspartic Polyureas

We have wide range of coatings that are suitable for numerous applications and not only for industrial/commercial use. Polyaspartic Polyurea has unlimited advantages over other coatings on the market as it is an Elastomer, so it stretches and moves with the substrate which gives a waterproof, corrosion and chemical resistancy with a seamless floor every time. It is easy to use with a 1:1 ratio and can be applied all year round in one day. It can be applied in temperatures from -20°C to 60°C.It is a roll on process but can also be sprayed so is ideal in the workplace or home and has virtually no odour unlike most epoxy resins and polyurethanes, due to their high VOC levels. It is 98% more flexible and four times stronger than epoxy resins. It displays fast cure times with excellent adhesion and provides a glossy smooth finish when cured, application possible in thin and thick coats, as needed...Polyurea Polyaspartics displays excellent chemical resistance, water insensitivity and UV resistance at a wide range of temperatures.All products can be offered with a non-slip surface to your requirements i.e. walkways / footpaths. All slip resistant tests will be carried out once the application has been completed on site. At that time the relevant certification will be issued.It is available in clear water transparent version and can be custom tinted on request. Different coloured flakes and quartz are also available.

o Workplace & home applicationo Marine protection for fibreglass, steel or woodo Aircraft hanger floorso Low temperature equipmento Projects requiring UV stabilityo Industrial shop floorso Car washes or wash bayso Secondary containmento Mining equipmento Bridge coatingso Water proofingo Wastewater treatment applicationso Anti-microbial is also availableo Anchoringo Swimming poolso Car industryo Workshopso Roofs protectiono Balconieso Steel protection – long lasting anticorrosiono Woodwork protection

Everywhere...

Gdańsk Hospital, sterilization section area, one night application...

Capitol Coatings Polska Sp. z o. o. 02-690 Warsaw, Bokserska 23 tel. +48 604505902 +48 501773624 e-mail: biuro@capitolcoatings.pl

Fluorescent POLYASPARTICFluorescent POLYASPARTIC ®®

The FLUORESCENT POLYASPARTIC foils can be cut in differentThe FLUORESCENT POLYASPARTIC foils can be cut in different shapes and laminated into the area with the clear polyaspartic resin asshapes and laminated into the area with the clear polyaspartic resin as a topcoat... 4000 milicandles after 4 hours in darkness... Elastic... a topcoat... 4000 milicandles after 4 hours in darkness... Elastic...

Bioflex ® Polyflake ®

Incorporated Bio-Static Antimicrobial Technology safely and permanently protects the Polyaspartic from the harmful degrading effects of bacteria, mould, mildew and fungi.The Bioflex range has been successfully tested against over 50 common organisms such as MRSA, E.coli, Salmonella, Listeria,Pseudomonas, and Aspergillus Niger.

By itself, without the incorporated B-SAT, it does not support the growth of bacteria. Just like polyureas...

By itself it is sufficient for laboratories, hospitals, restaurants, kitchens, meat plants and many other applications... Anti-bacterial...

Capitol Coatings Polska Sp. z o. o. 02-690 Warsaw, Bokserska 23 tel. +48 604505902 +48 501773624 e-mail: biuro@capitolcoatings.pl

Polyaspartic vs. other resins comparison

POLYASPARTIC EPOXY COATINGS

ACRYLIC SEALERS

UV Resistance Excellent Poor GoodColour Stability Excellent Turns Yellow FadesAvailable in UV Stable Clear Yes No YesApply in Cold Weather Yes No NoResistance to Thermal Shock

Excellent Poor Fair

Cure below 40° F Yes No NoEasily Coatable Yes No YesCan Become Structural Yes Yes NoSolvent Content 0 0-50% 30-80%Zero VOCs Yes Some Some100% solids Yes Some NoRemains Flexible(>50% elongation)

Permanent Few No

Waterproof Yes Yes NoMoisture proof Yes Some NoVaporproof (similar to PVC) Yes Some NoChemical Resistance Excellent Very Good PoorTire Marking Resistance Excellent Very Good PoorSeamless Yes Yes YesResilient Yes Poor NoEasy To Apply Yes No YesNumber of Components 2 2 1Adhesive Bond Strength Excellent Excellent GoodEasily Repaired Yes No NoOut gassing Low Low to Medium MediumEnvironmentally Friendly Yes Some NoHigh Thickness Possible Yes Yes NoMicron Thickness (Dry Film Thickness)

500 Most -400 100

The excellent chemical resistance (eg. 10% or 50% sulphric acid)The excellent chemical resistance (eg. 10% or 50% sulphric acid) makes it an ideal area protection system for difficult applications wheremakes it an ideal area protection system for difficult applications where epoxy or polyurethane would not have a chance to last longer than 24epoxy or polyurethane would not have a chance to last longer than 24 hours...hours...

It can only be compared to classical polyurea floorings... Yet... It isIt can only be compared to classical polyurea floorings... Yet... It is faster... It is UV resistant... It can be applied in below Ofaster... It is UV resistant... It can be applied in below OººC... It looksC... It looks beautiful... And it is less expensive per coat...beautiful... And it is less expensive per coat...

Capitol Coatings Polska Sp. z o. o. 02-690 Warsaw, Bokserska 23 tel. +48 604505902 +48 501773624 e-mail: biuro@capitolcoatings.pl

Capitol Coatings Polska Sp. z o. o. 02-690 Warsaw, Bokserska 23 tel. +48 604505902 +48 501773624 e-mail: biuro@capitolcoatings.pl

Capitol Coatings Polska Sp. z o. o. 02-690 Warsaw, Bokserska 23 tel. +48 604505902 +48 501773624 e-mail: biuro@capitolcoatings.pl

One resin... For industrial and decorative applications...

Capitol Coatings Polska Sp. z o. o. 02-690 Warsaw, Bokserska 23 tel. +48 604505902 +48 501773624 e-mail: biuro@capitolcoatings.pl