Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
www.tecorp.in
Pole Line Hardware
Conductor Fittings
Cable Accessories
1
TRAN
SMIS
SION
EQU
IPM
ENT
CORP
ORAT
ION
TRAN
SMIS
SION
EQUI
PMEN
TCO
RPOR
ATIO
N
TEC was established in 1975, as a manufacturing unit specializing in the supply of electrical fittings for use by the Power Utility Companies. TEC has since evolved as India’s leading manufacturer and exporter of products relative to:
• Pole Line Hardware• Conductor Fittings• Cable Accessories
Over the years, TEC has established its name and trust with customers from all over the world, especially in the EU (European Union), by developing new products through customization, research and co-operation with its esteemed customers. Accredited to ISO-9001:2008 by BSI Management Systems U.K., TEC has a fully equipped, modern manufacturing unit, utilizing the latest technology and machin-ery, thus enabling constant improvement in the quality of its products and at the same time keeping in mind its cost effectiveness.
TEC products are manufactured strictly in accordance with the specifications and designs laid down by accepted International Standards Institutes and, as such, have total control over the quality of its products right from the raw material to the finished item. Rigorous testing is a key element of our quality control which has given our quality conscious customers confidence in our supply.
ABOUT THE COMPANY
2
TEC products are globally well accepted in emerging and matured markets with a large percentage of its products being sold within the EU.
Our products are being successfully supplied to the following countries.
GLOBAL PRESENCE
IndiaNepal
Bangladesh
Thailand
Malaysia
Mauritius
United Kingdom
Ireland BelgiumGermanyFrance
SpainItaly
Malta GreeceCyprus
Singapore
3
POLE LINE HARDWAREPRODUCT PORTFOLIO
POLE LINE HARDWARE
4
BENT BOLTMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
CLEVIS ACCESSORIESMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
D IRON Material Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
EAVES EXTENSION BRACKETSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
5
CROSSARMSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
INSULATOR BRACKETMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
FACADE WALL BRACKETMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
HOOKSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
6
Hook Screw
Hook Screw Nut Type
J Hook
Pole Hook / J Bolt
INSULATOR STRAPMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
PIPE / POLE CLAMPMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
POLE CLAMPMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461Fasteners Mild Steel or High Tensile Steel
LARGE SHACKLE STRAP FOR STEEL POLEMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
7
M F F Ankerschelle
LINKMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
SAG ADJUSTMENT PLATEMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
8
Flat Link
Twisted Link
Cranked Link
Quad Zebra Drop Link
Parellel Conversion Link
Cranked Link Assembly
STAY RODSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
STRAINING SCREWMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
9
Bow Type
Loop Type
Tubular Type
Eye - Eye
Eye - Hook
TOWING PLATESMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
TIE BARMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
STRAPSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
10
Tie Straps
Shackle Straps
YOKE PLATESMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
U CLEVISMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
U BOLTMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
11
12
WALL BRACKETSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461
BR
13
CONDUCTOR FITTINGSPRODUCT PORTFOLIO
CONDUCTOR FITTINGS
14
ANCHOR CLAMPMaterial En 3A SteelTube High Conductivity Aluminum with Min. 99.5% purityFinish Hot Dip Galvanised as per BS EN ISO 1461
COPPER C CONNECTORMaterial High Conductivity Copper with Minimum 99.5 % purityFinish Neutral or Electro Tin Plated
ALUMINIUM / COPPER LOOPS / STIRRUPSMaterial High Conductivity Aluminium / Copper with Minimum 99.5 % purityFinish Electro Tin Plated / Bare
AL SADDLE TAPS / V LINE CONNECTORSMaterial Al AlloyFinish Neutral
Clevis Fitting Only
Clevis Type
Aluminium
Aluminium
Copper
Copper
15
CRIMP CONNECTORSMaterial High Conductivity Aluminium with Minimum 99.5 % purityFinish Neutral
Copper
Brass
DC TAPE CLIPS OR SPACER CLAMPSMaterial Brass and Copper with Minimum 99.5% PurityFinish Neutral or Tin / Bright Nickel PlatedFasteners Mild Steel; Zinc Plated / Bright Nickel Plated
HOT LINE CLAMPSMaterial Die Casted Al Alloy / Stamped / ForgedFinish Mild Steel; Zinc Plated / Bright Nickel Plated
Aluminium Conductors
Copper ConductorsRIGHT ANGLE CONNECTORS
Material High Conductivity Aluminium with Minimum 99.5 % purityFinish NeutralFasteners Mild Steel; Zinc Plated / Bright Nickel Plated
16
INSULATING SHROUDSMaterial Thermoplastic / PPColour Black / Cream / Red / Blue / Green
Al saddle taps/Vline connectors
Red BlueBlack Cream Green
Brass
Copper
MECHANICAL BUS BAR CLAMPSMaterial Brass and Copper with Minimum 99.5% PurityFinish Neutral or Tin / Bright Nickel PlatedFasteners Mild Steel; Zinc Plated / Bright Nickel Plated
SPILT BOLT BRASS LINE CONNECTORSMaterial Brass / Copper / AluminiumFinish Neutral or Electro Tin Plated for Copper PartsFasteners Neutral / Electro Tin Plated / Bright Nickel Plated
AluminiumCopper
Brass
17
P. G. CLAMPSMaterial High Conductivity Aluminium / Copper with Minimum 99.5% purityFinish Neutral or Electro Tin Plated for Copper PartsFasteners Mild Steel; Zinc Plated / Bright Nickel Plated / Hot Dip Galvanised
SUSPENSION CLAMPSMaterial Die Casted Al AlloyFinish NeutralFasteners Mild Steel or High Tensile Steel; Hot Dip Galvanised
18
TAILOR MADE CONNECTORS AND TERMINALSMaterial High Conductivity Aluminium / Copper with Minimum 99.5%Finish Neutral or Electro Tin Plated for Copper PartsFasteners Mild Steel; Zinc Plated / Bright Nickel Plated
Aluminium
Copper
TENSION CLAMPSMaterial Die Casted Al AlloyFinish NeutralFinish Mild Steel or High Tensile Steel; Hot Dip Galvanised
TENSION JOINTS FOR ROBIN / SWAN / OXLIP / POPPY / RACOON CONDUCTORSMaterial High Conductivity Aluminium / Copper with Min. 99.5% PurityFinish Neutral
19
BAKELITE SHROUDSMaterial Thermosetting Bakelite as per IS 1300 Grade 2Finish Neutral / Black / Cream
20
TINSEL STOCKINGMaterial High Conductivity Aluminium / Copper with Minimum 99.5% purityFinish Neutral or Electro Tin Plated
WORM DRIVE CLIPS / JUBILEE CLIPSMaterial Stainless Steel / Mild steelFinish Neutral / Zinc Plated
COPPER WIREMaterial High Conductivity Aluminium / Copper with Minimum 99.5% purityFinish Neutral or Electro Tin Plated
COPPER BRAIDS (WITH SOLDER BLOCK)Material High Conductivity Aluminium / Copper with Minimum 99.5% purityFinish Neutral or Electro Tin Plated
STEEL COLLETSMaterial Mild Steel as per BS 4360 ; Grade 43AFinish Zinc Plated/hot Dip Galvanised as per BS EN ISO 1461
HEAT SHRINKABLE CABLE TERMINATIONS HARDWARE
21
CABLE ACCESSORIESPRODUCT PORTFOLIO
CABLE ACCESSORIES
22
ALUMINIUM / COPPER STRAIGHT CONNECTORSMaterial High Conductivity Aluminium / Copper with Min. 99.5% PurityFinish Neutral
COMPRESSION TYPE ALUMINIUM LUGSMaterial High Conductivity Aluminium with Min. 99.5% PurityFinish Neutral
ALUMINIUM SCREW LUGSMaterial High Conductivity Aluminium with Min. 99.5% PurityFinish Neutral
Sector Shaped Cables Solid Conductor
Sector Shaped Solid Cables
Sector Shaped Connector
Straight Connector
Straight Connector with Tapered Edges
23
ALUMINIUM PIN CONNECTORSMaterial High Conductivity Aluminium with Min. 99.5% PurityFinish Neutral
COPPER TERMINALSMaterial High Conductivity Copper with Min. 99.5% PurityFinish Neutral / Electro Tin Plated
BI-METAL FITTINGSMaterial High Conductivity Copper / Aluminium with Min. 99.5% PurityFinish Neutral Sector Shaped Cables Solid Conductor
Billets
Straight Ferrules
Straight Connectors
Sector Shaped Ferrules
Long Barrel Lugs
Short Barrel Lugs Sector Shaped Lugs
Sector Shaped Solid Cables
Belly Bulge Terminal
Regular Type
Weak Back Terminal
24
Right Angle Terminals
Terminals with Inspection Holes
ALUMINIUM TERMINALMaterial High Conductivity Aluminium with Min. 99.5% PurityFinish Electro Tin Plated/ Bare
Regular Type
Belly Bulge Type
Adjustable Trefoil Cleats
CHANNEL NUTSMaterial Mild Steel / High Tensile SteelFinish Zinc Plated / Bright Nickel Plated
Trefoil Cleatswith double hole fixing
Channel Nuts
Trefoil Cleatswith single hole fixing
Claw Cleats
CABLE CLEATS / CLAMPSMaterial Die Casted Al AlloyFinish NeutralFasteners Mild Steel or High Tensile Steel; Hot Dip Galvanised / Zinc Plated / Bright Nickel Plated
Cleats with double hole fixing
Transmission Equipment CorporationFE - 96, Sector - 3
Salt Lake, Kolkata - 700 106, India.Tele - Fax: ++91 33 2334 3645
email: [email protected]
This catalogue is issued to provide outline information only and is not deemed to form part of an offer or contract. With the policy of continuous development, TEC reserves the right to change details without prior notice.
A Te
chno
Vis
ion,
Cal
cutta
, Ind
ia P
rodu
ct