ROI-S04630-051E 030512

P ASOLINK

N ETWORK

M ANAGEMENT

T ERMINAL

Install Manual (WindowsXP)

NEC CorporationCopyright © 2003

ROI-S04630

- i -

Table of Contents 1. Order of Installation ...................................................................................................................1 2. Phone and Modem Options Setting ...........................................................................................2 3. Dial-up Setting............................................................................................................................7 4 PNMT Setup..............................................................................................................................16 5. Launching PNMT ......................................................................................................................19

ROI-S04630

- 1 -

1. Order of Installation Notice -Before installing PNMT, Installation of Internet Explorer 5.0 or more is required. -Installation of Acrobat Reader is also required in order to see a help file. Order of installation is described as below.

Step 1: Phone and Modem Options Setting

Step 2: Network and Dial-up Connection Setting

Step 3: Pasolink Network Management Terminal(PNMT) Setup

ROI-S04630

- 2 -

2. Phone and Modem Options Setting

(1) Click on Start | Settings | Control Panel on the Windows XP™ start tab.

(2) Click on Phone and Modem Options icon to start configuring the modem.

ROI-S04630

- 3 -

(3) Select country and input area code on Location Information. Click on OK button to continue.

(4) Verify Location and Area Code.

ROI-S04630

- 4 -

(5) Select Modem tab, click on Add button to continue adding the new modem for PNMT.

(6) Check on Don’t detect my modem… box and click on Next button to continue.

ROI-S04630

- 5 -

(7) Select Standard Modem Types and Standard 19200bps Modem from Manufacturer and Models list respectively. Click on Next button to continue.

(8) Select Selected ports and COM1, then click on Next button to continue. If you are using multi-port configuration, select All ports to install the standard 19200 bps modem driver to all available COM ports.

ROI-S04630

- 6 -

(9) Click on Finish button to finalize the new modem installation.

(10) Verify that COM1 Standard 19200 bps Modem is displayed on the list. Click on OK button.

ROI-S04630

- 7 -

3. Dial-up Setting

(1) Click on Start | Settings | Control Panel | Network Connections icon to start configuring the Dialup setting.

(2) Network Connections is displayed. Click the Create a new connection in Network Tasks category.

ROI-S04630

- 8 -

(3) Click on Next button on the next message box.

(4) Select option Connect to the network at my workplace and click on Next button to continue.

ROI-S04630

- 9 -

(5) Select option Dial-up connection and click on Next button to continue.

(6) On the Network Connection Wizard window, type in pnmt on the input box. Click on Next button to continue.

ROI-S04630

- 10 -

(7) Enter any number in the Phone number box. Click on Next button to continue.

(8) Verify that the connection pnmt has registered. You can also create a shortcut on your desktop if you need. Click on Finish button.

ROI-S04630

- 11 -

(9) On the Connect Dial-up Connection window, click on Cancel button to continue. Click Properties button on Connect Dial-up Connection window.

(10) On the Dial-up Connection Properties window, verify that selected device is Modem- Standard 19200 bps Modem [COM1] on the General tab. Click on the Configure button.

ROI-S04630

- 12 -

(11) On the Modem Configuration window, uncheck all five boxes.

(12) On the Option tab, keep default setting and click on the Security tab.

ROI-S04630

- 13 -

(13) On the Security tab, keep default setting and click on the Networking tab.

(14) On the Networking tab, verify that Type of dial-up server I am calling is PPP and uncheck File and Printer and Client for Microsoft.

ROI-S04630

- 14 -

(15) Click on Settings button. Uncheck all the boxes on the ensuing window just as shown in figure below. Click OK to go back to previous window. Highlight Internet Protocol (TCP/IP) then click on the properties box.

(16) Verify that both Obtain an IP address automatically and Obtain DNS server address automatically are selected.

ROI-S04630

- 15 -

(17) On the Advanced TCP/IP Settings window, uncheck Use IP header compression in the PPP link. Click OK button.

(18) On the Advanced tab, keep default setting and click OK button.

ROI-S04630

- 16 -

4 PNMT Setup

(1) Insert PNMT Installation CDROM. Open the CDROM folder and double-click on setup.exe.

(2) Click Next.

ROI-S04630

- 17 -

(3) Specify the directory where you want to install PNMT. Then click on Next button.

(4) Click on Next button to confirm the PNMT software installation.

ROI-S04630

- 18 -

(5) A message window prompting the successful installation will appear when your PNMT installation is complete. Click on Close button to close the PNMT installation wizard.

(6) Check the contents of the Pnmt folder.

ROI-S04630

- 19 -

5. Launching PNMT

(1) Click on Start | Programs |PNMT |PNMT to start the application.

(2) Default user name and password are:

After installation of PNMT, Initial password is listed below. User name: Admin

Password : (No initial password defined. Just press on Enter key.

The password can then be modified.)