Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
38 41 44 50 51
PNEUMATIC ACCESSORIES
Air Quick Disconnect Couplings Brass Mufflers Air Hose Reels Air Line Dusters & Blowguns Filter, Regulator & Etc.
FLUID-TEC PNEUMATIC
Part No. Nipple BSPTP/N Size Size
PM 20 1/4 1/4PM 30 3/8 3/8PM 40 1/2 1/2
PM 600 3/4 3/4PM 800 1 1
Male Nipple x BSPT Male
Part No. Coupler BSPTP/N Size Size
SM 20 1/4 1/4SM 30 3/8 3/8SM 40 1/2 1/2
SM 600 3/4 3/4SM 800 1 1
Female Coupler x BSPT Male
Part No. Nipple Hose InsertP/N Size Size
PH 20 1/4 1/4PH 30 3/8 3/8PH 40 1/2 1/2
PH 600 3/4 3/4PH 800 1 1
Male Nipple x Hose Tail
Part No. Coupler Hose InsertP/N Size Size
SH 20 1/4 1/4SH 30 3/8 3/8SH 40 1/2 1/2
SH 600 3/4 3/4SH 800 1 1
Female Coupler x Hose Tail
38
QUICK DISCONNECT COUPLING FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
Hi-Cupla Quick Coupling
Application : Low pressure general purpose coupling for connecting air supply to pneumatic tools
Sizes : 1/4”, 3/8”, 1/2”, 3/4” and 1”
Specifications : • 15 Bar Working Pressure • Nitrile Rubber Seal • -20°C to +80°C Working Temp.
Part No. Nipple BSPTP/N Size Size
PF 20 1/4 1/4PF 30 3/8 3/8PF 40 1/2 1/2
PF 600 3/4 3/4PF 800 1 1
Male Nipple x BSPT Female
Part No. Coupler BSPTP/N Size Size
SF 20 1/4 1/4SF 30 3/8 3/8SF 40 1/2 1/2
SF 600 3/4 3/4SF 800 1 1
Female Coupler x BSPT Female
Part No. Nipple NPTP/N Size Size
NP 20 M 1/4 1/4NP 30 M 3/8 3/8NP 40 M 1/2 1/2
NLP 600 M 3/4 3/4NPL 800 M 1 1
Male Nipple x NPT Male
Part No. Coupler NPTP/N Size Size
NC 20 M 1/4 1/4NC 30 M 3/8 3/8NC 40 M 1/2 1/2
NC 600 M 3/4 3/4NC 800 M 1 1
Female Coupler x NPT Male
Part No. Nipple NPTP/N Size Size
NP 20 F 1/4 1/4NP 30 F 3/8 3/8NP 40 F 1/2 1/2
NLP 600 F 3/4 3/4NPL 800 F 1 1
Male Nipple x NPT Female
Part No. Coupler NPTP/N Size Size
NC 20 F 1/4 1/4NC 30 F 3/8 3/8NC 40 F 1/2 1/2
NC 600 F 3/4 3/4NC 800 F 1 1
Female Coupler x NPT Female
QUICK DISCONNECT COUPLING FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
Hi-Cupla Quick Coupling
39
Application : Low pressure general purpose coupling for connecting air supply to pneumatic tools
Sizes : 1/4”, 3/8”, 1/2”, 3/4” and 1”
Specifications : • 15 Bar Working Pressure • Nitrile Rubber Seal • -20°C to +80°C Working Temp.
QUICK DISCONNECT COUPLING FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
Series 025 Super-Flow Quick Coupling
Application : Low to medium pressure general purpose coupling for connecting air supply to pneumatic tools
Sizes : 1/4”, 3/8”, 1/2”, 3/4” and 1”
Specifications : • 35 Bar Working Pressure • Nitrile Rubber Seal • -20°C to +100°C Working Temp.
Part No. Nipple Hose InsertP/N Size Size
025 HU 06
Same Size
1/4025 HU 08 5/16025 HU 09 5/14025 HU 10 3/8025 HU 13 1/2025 HU 16 5/8
Male Nipple x Hose Tail
Part No. Coupler Hose InsertP/N Size Size
025 HG 06
Same Size
1/4025 HG 08 5/16025 HG 09 5/14025 HG 10 3/8025 HG 13 1/2025 HG 16 5/8
Female Coupler x Hose Tail
Part No. Nipple BSPTP/N Size Size
025 RU 10
Same Size
1/4025 RU 13 3/8025 RU 17 1/2025 RU 21 3/4
Male Nipple x BSPT Male
Part No. Coupler BSPTP/N Size Size
025 RG 10
Same Size
1/4025 RG 13 3/8025 RG 17 1/2025 RG 21 3/4
Female Coupler x BSPT Male
Part No. Nipple BSPTP/N Size Size
025 DU 10
Same Size
1/4025 DU 13 3/8025 DU 17 1/2025 DU 21 3/4
Male Nipple x BSPT Female
Part No. Coupler BSPTP/N Size Size
025 DG 10
Same Size
1/8025 DG 13 1/4025 DG 17 3/8025 DG 21 1/2
Female Coupler x BSPT Female
40
BRASS MUFFLERS FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
Model BM-08 BM-18 BM-28 BM-38 BM-48 BM-68 BM-88 BM-128 BM-148 BM-200
Connection M5 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” 2”
Filtering Grade : 70 Micron
Max Pressure : 150PSI
Operating Temperature : -30°C to +150°C
Material : Stainless Steel, Steel, Brass
BM Series
BV Series
Model BV-08 BV-18 BV-28 BV-38 BV-48 BV-68 BV-88 BV-128 BV-148 BV-200
Connection M5 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” 2”
Filtering Grade : 40 Micron
Max Pressure : 300PSI
Operating Temperature : -30°C to +150°C
Material : Stainless Steel, Steel, Brass
SCM Series
Model SCM-08 SCM-18 SCM-28 SCM-38 SCM-48 SCM-68 SCM-88
Connection M5 1/8” 1/4” 3/8” 1/2” 3/4” 1”
Filtering Grade : 70 Micron
Max Pressure : 250PSI
Operating Temperature : 1.6°C to +200°C
Material : Stainless Steel, Brass
41
Filtering Grade : 40 Micron
Max Pressure : 300PSI
Operating Temperature : -30°C to +150°C
Material : Brass
BRASS MUFFLERS FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
Model SBR-18 SBR-28 SBR-38 SBR-48
Connection 1/8” 1/4” 3/8” 1/2”
Filtering Grade : 70 Micron
Max Pressure : 300PSI
Operating Temperature : -30°C to +150°C
Material : Brass
SBR Series
SPBM Series
Model SPBM-18 SPBM-28 SPBM-38 SPBM-48
Connection 1/8” 1/4” 3/8” 1/2”
SBC Series
Model SBC-18 SBC-28 SBC-38
Connection 1/8” 1/4” 3/8”
Filtering Grade : 40 Micron
Max Pressure : 300PSI
Operating Temperature : -30°C to +150°C
Material : Brass
42
BRASS MUFFLERS FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
Model SBN-18 SBN-28 SBN-38 SBN-48 SBN-68 SBN-88
Connection 1/8” 1/4” 3/8” 1/2” 3/4” 1”
Filtering Grade : 70 Micron
Max Pressure : 150PSI
Operating Temperature : -30°C to +150°C
Material : Stainless Steel, Steel, Brass
SBN Series
PM Series
Model PM-18 PM-28 PM-38 PM-48
Connection 1/8” 1/4” 3/8” 1/2”
Filtering Grade : 40 Micron
Max Pressure : 300PSI
Operating Temperature : -30°C to +150°C
Material : Stainless Steel, Steel, Brass
43
AIR HOSE REEL FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
HR04 Series (Spring Driven)
Part No. Hose I.DHose O.D WP BP Hose Length
Fitting Thread Weight
P/N mm inch mm bar bar inlet outlet inlet/outlet kgHR04-UB6510 6.5 1/4 10 15 60 50 cm 10 m 1/4 8.00HR04-UB6515 6.5 1/4 10 15 60 50 cm 15 m 1/4 8.00HR04-UB8010 8.0 5/16 12 15 60 50 cm 10 m 1/4 9.00HR04-UB8012 8.0 5/16 12 15 60 50 cm 12 m 1/4 9.00
HR04-UB8015 8.0 5/16 12 15 60 50 cm 15 m 1/4 9.00HR04-UB9510 9.5 3/8 14.5 15 60 50 cm 10 m 3/8 9.50HR04-UB9512 9.5 3/8 14.5 15 60 50 cm 12 m 3/8 9.50HR04-UB1010 10.0 10.0 15 15 60 50 cm 10 m 3/8 9.50
Specifications : • Spring protector at hose end to protect against damage when pulled/stretched
• Heavy duty reinforced steel housing • Stopper to adjust exposed hose length outside reel • Supplied with wall/ceiling mount bracket for fixed or
pivoting support
Hose Material : Polyurethane Braid Hose
Temperature : -5°C to +60°C
Dimensions : 40cm x 18cm x 33cm
Fitting Thread : BSPT / NPT
HR11 Series (Spring Driven)
Part No. Hose I.DHose O.D WP BP Hose Length
Fitting Thread Weight
P/N mm inch mm bar bar inlet outlet inlet/outlet kgHR11-UB6508 6.5 1/4 10 15 60 50 cm 8 m 1/4 8.00HR11-UB6510 6.5 1/4 10 15 60 50 cm 10 m 1/4 8.00
HR11-UB6512 6.5 1/4 10 15 60 50 cm 12 m 1/4 8.00HR11-UB8008 8.0 5/16 12 15 60 50 cm 8 m 1/4 8.00
Specifications : • Strong ABS plastic casing • Supplied with bracket and hanging hook • Stopper to adjust exposed hose length outside reel
Hose Material : Polyurethane Braid Hose
Temperature : -5°C to +60°C
Dimensions : 34.5 cm x 30 cm x 14.5 cm
Fitting Thread : BSPT / NPT
44
AIR HOSE REEL FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
HR11 Series (Spring Driven)
Part No. Hose I.DHose O.D WP BP Hose Length
Fitting Thread Weight
P/N mm inch mm bar bar inlet outlet inlet/outlet kgHR12-UB6508 6.5 1/4 10 15 60 50 cm 8 m 1/4 8.00
HR12-UB6510 6.5 1/4 10 15 60 50 cm 10 m 1/4 8.00HR12-UB6512 6.5 1/4 10 15 60 50 cm 12 m 1/4 8.00HR12-UB8008 8.0 5/16 12 15 60 50 cm 8 m 1/4 8.00
Specifications : • Strong ABS plastic casing • Supplied with hook to hang • Stopper to adjust exposed hose length outside reel
Hose Material : Polyurethane Braid Hose
Temperature : -5°C to +60°C
Dimensions : 34.5 cm x 30 cm x 14.5 cm
Fitting Thread : BSPT / NPT
HR01 Series (Spring Driven)
Part No.Hose I.D
Hose O.D WP BP Hose Length Fitting Thread Weight
P/N mm mm bar bar inlet outlet inlet/outlet kgHR01-U5075 5.0 8.0 8 24 - 7.5 m 1/4 1.40HR01-UB5075 5.0 8.0 15 45 - 7.5 m 1/4 1.40HR01-U6560 6.5 10.0 8 24 - 6.0 m 1/4 1.40
HR01-UBS6560 6.5 10.0 15 45 - 6.0 m 1/4 1.40
Specifications : • Strong ABS impact resistant plastic casing • Close cased type • Stopper to adjust exposed hose length outside reel
Hose Material : Polyurethane Hose / Polyurethane Braid Hose
Temperature : -5°C to +60°C
Dimensions : 24 cm x 21.5 cm x 9.5 cm
Fitting Thread : BSPT / NPTUse the hook to hang or anchor it to the wall or ceiling
45
AIR HOSE REEL FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
HR09 Series (Spring Driven)
Part No.Hose
I.DHose O.D WP BP Hose Length Fitting Thread Weight
P/N mm mm bar bar inlet outlet inlet/outlet kgHR09-U5012 5.0 8.0 8 24 - 1.2 m 1/4 1.00
HR09-U5020 5.0 8.0 8 24 - 2.0 m 1/4 1.00HR09-U5025 5.0 8.0 8 24 - 2.5 m 1/4 1.00
Specifications : • Impact resistant ABS plastic casing • Supplied with hook to hang • Stopper to adjust exposed hose length outside reel
Hose Material : Polyurethane Hose
Temperature : -5°C to +60°C
Dimensions : 21 cm x 16 cm x 11 cm
Fitting Thread : BSPT / NPT
HR07 Series (Manual Driven)
Part No. Hose I.DHose O.D WP BP Hose Length
Fitting Thread Weight
P/N mm inch mm bar bar inlet outlet inlet/outlet kgHR07-UB6520 6.5 1/4 10 15 60 110 cm 20 m 1/4 5.00HR07-UB6525 6.5 1/4 10 15 60 110 cm 25 m 1/4 5.00HR07-UB6530 6.5 1/4 10 15 60 110 cm 30 m 1/4 5.00HR07-UB8010 8.0 5/16 12 15 60 110 cm 10 m 1/4 5.30HR07-UB8015 8.0 5/16 12 15 60 110 cm 15 m 1/4 5.30
HR07-UB8020 8.0 5/16 12 15 60 110 cm 20 m 1/4 5.30HR07-UB9510 9.5 3/8 14.5 15 60 110 cm 10 m 3/8 5.50HR07-UB9515 9.5 3/8 14.5 15 60 110 cm 15 m 3/8 5.50HR07-UB9520 9.5 3/8 14.5 15 60 110 cm 20 m 3/8 5.50
Specifications : • Handy crank hose reel • Heavy duty reinforced steel construction • Foldable handle to rewind hose after use • Small in size for portability
Hose Material : Polyurethane Braid Hose
Temperature : -5°C to +60°C
Dimensions : 34 cm x 27.6 cm x 39.5 cm
Fitting Thread : BSPT / NPT
46
AIR HOSE REEL FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
HR07DX Series (Manual Driven)
Part No. Hose I.DHose O.D WP BP Hose Length
Fitting Thread Weight
P/N mm inch mm bar bar inlet outlet inlet/outlet kgHR07DX-UB6520 6.5 1/4 10 15 60 110 cm 20 m 1/4 6.00HR07DX-UB6525 6.5 1/4 10 15 60 110 cm 25 m 1/4 6.00HR07DX-UB6530 6.5 1/4 10 15 60 110 cm 30 m 1/4 6.00HR07DX-UB8010 8.0 5/16 12 15 60 110 cm 10 m 1/4 6.30
HR07DX-UB8015 8.0 5/16 12 15 60 110 cm 15 m 1/4 6.30HR07DX-UB8020 8.0 5/16 12 15 60 110 cm 20 m 1/4 6.30HR07DX-UB9510 9.5 3/8 14.5 15 60 110 cm 10 m 3/8 6.50HR07DX-UB9515 9.5 3/8 14.5 15 60 110 cm 15 m 3/8 6.50HR07DX-UB9520 9.5 3/8 14.5 15 60 110 cm 20 m 3/8 6.50
Specifications : • Handy crank hose reel • Heavy duty reinforced steel construction • Foldable handle to rewind hose after use • Can be fixed onto wall for indoors. Also portable for
outdoor use.
Hose Material : Polyurethane Braid Hose
Temperature : -5°C to +60°C
Dimensions : 34 cm x 27.6 cm x 39.5 cm
Fitting Thread : BSPT / NPT
Can be mounted and fixed indoors. Also portable for outdoor use.
47
AIR HOSE REEL FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
HR02 Series (Manual Driven)
Part No. Hose I.DHose O.D WP BP Hose Length
Fitting Thread Weight
P/N mm inch mm bar bar inlet outlet inlet/outlet kgHR02-UB6520 6.5 1/4 10 15 60 110 cm 20 m 1/4 6.70HR02-UB6530 6.5 1/4 10 15 60 110 cm 30 m 1/4 7.50HR02-UB6540 6.5 1/4 10 15 60 110 cm 40 m 1/4 8.30HR02-UB6550 6.5 1/4 10 15 60 110 cm 50 m 1/4 9.00
HR02-UB8020 8.0 5/16 12 15 60 110 cm 20 m 1/4 7.00HR02-UB8030 8.0 5/16 12 15 60 110 cm 30 m 1/4 8.00HR02-UB8040 8.0 5/16 12 15 60 110 cm 40 m 1/4 9.00HR02-UB8520 8.5 - 12.5 15 60 110 cm 20 m 1/4 7.00HR02-UB8530 8.5 - 12.5 15 60 110 cm 30 m 1/4 8.00
HR02-UB8540 8.5 - 12.5 15 60 110 cm 40 m 1/4 9.00HR02-UB9520 9.5 3/8 14.5 15 60 110 cm 20 m 3/8 8.00HR02-UB9525 9.5 3/8 14.5 15 60 110 cm 25 m 3/8 8.50HR02-UB9530 9.5 3/8 14.5 15 60 110 cm 30 m 3/8 9.00HR02-UB1020 10.0 - 15 15 60 110 cm 20 m 3/8 8.00HR02-UB1030 10.0 - 15 15 60 110 cm 30 m 3/8 9.00
HR02-UB1130 11.0 - 16 15 60 110 cm 30 m 3/8 10.00
Specifications : • Handy crank hose reel • Heavy duty reinforced steel construction • 360° rotary base
Hose Material : Polyurethane Braid Hose
Temperature : -5°C to +60°C
Dimensions : 34 cm x 28 cm x 37 cm
Fitting Thread : BSPT / NPT
48
AIR HOSE REEL FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
HR02DXS Series (Manual Driven)
Part No. Hose I.DHose O.D WP BP Hose Length
Fitting Thread Weight
P/N mm inch mm bar bar inlet outlet inlet/outlet kgHR02DXS-UB6520 6.5 1/4 10 15 60 110 cm 20 m 1/4 7.70HR02DXS-UB6530 6.5 1/4 10 15 60 110 cm 30 m 1/4 8.50HR02DXS-UB6540 6.5 1/4 10 15 60 110 cm 40 m 1/4 9.30HR02DXS-UB8020 8.0 5/16 12 15 60 110 cm 20 m 1/4 8.00
HR02DXS-UB8030 8.0 5/16 12 15 60 110 cm 30 m 1/4 9.00HR02DXS-UB8040 8.0 5/16 12 15 60 110 cm 40 m 1/4 10.00HR02DXS-UB8520 8.5 - 12.5 15 60 110 cm 20 m 1/4 8.00HR02DXS-UB8530 8.5 - 12.5 15 60 110 cm 30 m 1/4 9.00HR02DXS-UB9520 9.5 3/8 14.5 15 60 110 cm 20 m 3/8 9.00
HR02DXS-UB9525 9.5 3/8 14.5 15 60 110 cm 25 m 3/8 9.50HR02DXS-UB9530 9.5 3/8 14.5 15 60 110 cm 30 m 3/8 10.00HR02DXS-UB1020 10.0 - 15 15 60 110 cm 20 m 3/8 9.00
Specifications : • Handy crank hose reel • Heavy duty reinforced steel construction • 360° rotary base • 4 pcs of rubber stopper to hold reel in place • Includes bracket and hardware for wall mounting
Hose Material : Polyurethane Braid Hose
Temperature : -5°C to +60°C
Dimensions : 34 cm x 27.6 cm x 39.5 cm
Fitting Thread : BSPT / NPT
Can be mounted and fixed indoors. Also portable for outdoor use.
49
DUSTER & BLOWGUN FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
Air Duster
Pistol Grip Blowgun
DG-10-1 Air Duster
• Hang up hook for easy storage • 100psi max working pressure
DG-10-3 Air Duster
• Hang up hook for easy storage • 100psi max working pressure • 80mm long nozzle to reach confined
space to blow debris
GS-10/25 Air Duster
• Trigger controls airflow to gun tip • 100mm or 250mm long nozzle to
reach confined space to blow debris • Comfortable, lightweight design • 1/4” female NPT inlet
KS-10/25 Air Duster
• Trigger controls airflow to gun tip • 100mm or 250mm long nozzle to
reach confined space to blow debris • Comfortable, lightweight design • 1/4” female NPT inlet
50
FILTER, REGULATOR & ETC. FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
GCS200 Series
Model Port SizeFiltering Grade
Pressure Range
Max Pressure
Proof Pressure Temperature
Drain Bowl Capacity
Oil Bowl Capacity Weight
GCS200-06 1/8” 40µ or 5µ 1.5 to 9.0 bar 10.0bar 15.0bar 5 to 60°C 10cc 25cc 580g
GCS200-08 1/4” 40µ or 5µ 1.5 to 9.0 bar 10.0bar 15.0bar 5 to 60°C 10cc 25cc 580g
GCS300 Series
Model Port SizeFiltering Grade
Pressure Range
Max Pressure
Proof Pressure Temperature
Drain Bowl Capacity
Oil Bowl Capacity Weight
GCS300-08 1/4” 40µ or 5µ 1.5 to 9.0 bar 10.0bar 15.0bar 5 to 60°C 40cc 75cc 1300g
GCS300-10 3/8” 40µ or 5µ 1.5 to 9.0 bar 10.0bar 15.0bar 5 to 60°C 40cc 75cc 1300g
GCS300-15 1/2” 40µ or 5µ 1.5 to 9.0 bar 10.0bar 15.0bar 5 to 60°C 40cc 75cc 1300g
GCS400 Series
Model Port SizeFiltering Grade
Pressure Range
Max Pressure
Proof Pressure Temperature
Drain Bowl Capacity
Oil Bowl Capacity Weight
GCS400-10 3/8” 40µ or 5µ 1.5 to 9.0 bar 10.0bar 15.0bar 5 to 60°C 80cc 160cc 2358g
GCS400-15 1/2” 40µ or 5µ 1.5 to 9.0 bar 10.0bar 15.0bar 5 to 60°C 80cc 160cc 2358g
51
FILTER, REGULATOR & ETC. FLUID-TEC PNEUMATIC
Fluid-Tec Engineering & Trading Pte Ltd ● Address : No. 5 Kian Teck Way Singapore 628733
Tel : +65 6264-3881 ● Fax : +65 6265-9707 ● Website: www.fluid-tec.net ● Email: [email protected]
GCS600 Series
Model Port SizeFiltering Grade
Pressure Range
Max Pressure
Proof Pressure Temperature
Drain Bowl Capacity
Oil Bowl Capacity Weight
GCS600-20 3/4” 40µ or 5µ 1.5 to 9.0 bar 10.0bar 15.0bar 5 to 60°C 230cc 380cc 3390g
GCS600-25 1” 40µ or 5µ 1.5 to 9.0 bar 10.0bar 15.0bar 5 to 60°C 230cc 380cc 3390g
Item Material
Body Aluminimum alloy
Umbrella baffle POM
Air guider POM
Filter element 40µ : Tin copper ; 5µ : Fiber
Drain bowl Aluminimum alloy
Leak post POM
Pressure Knoc POM
Adjusting seat Aluminimum alloy
Adjusting spindle HPB59-1
Diaphragm SUS304 covered in rubber
Pressure spring Stainless Steel
Spring Stainless Steel
Filling plug Brass
Bowl PC
Ejector pin Brass
Oil bowl Aluminimum alloy
Bowl guard Aluminimum alloy
Inner Structure & Material of major parts
52