242
QT-2000 Versatile Intelligent Terminal ———————————————————————— Programming Manual Version 2.0.0 June 1998 0.00 Key Assign 000.NOP 001.CASH 002.CHARGE 003.CHECK 004.CREDIT 006.NB 008.PRCINQ 009.STKINQ 010.CHAR 011.PRT 012.CHKP 013.CLK TRAN 014.TBL TRAN 015.TIP 016.NRMRCT 025.DEPOSIT v Coffee $8.00 $76.50 REG C01 15-12-97 12:34 001234 1 Spagetti $20.00 T1 1 Spagetti $20.00 T1 7.5% -1.50 $8.00 $2.00 T1 -0.30 $2.00 $5.00 $8.00 1 2 Date 97-12-15 Time 12:34 00 ID Character MC #01 Check System Master KP System R/J/Order Printer Slip Printer Rear Display Remote Display OK? No. Descriptor Qty Price 1 PLU0001 @1,234.00 PLU0001 12.26 @1.00 2 PLU0002 @20.00 PLU0002 0.00 @2.00 3 PLU0003 PLU0003 4 PLU0004 PLU0004 5 PLU0005 PLU0005 6 PLU0006 Record No. 1 X YES X/For YES X/XX YES X/XXX YES Ketten Bon Selective Item ST New Check Old Check New/Old Check Add Check Separate Check 0.00 Table Range Enter Start range 1 End range 123 OK? YES

PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

QT-2000Versatile Intelligent Terminal————————————————————————

Programming ManualVersion 2.0.0 June 1998

0.00

Key Assign000.NOP 001.CASH 002.CHARGE003.CHECK 004.CREDIT 006.NB008.PRCINQ 009.STKINQ 010.CHAR011.PRT 012.CHKP 013.CLK TRAN014.TBL TRAN 015.TIP 016.NRMRCT019.LOAN 020.RC 021.PD022.P.UP. 023.COUPON 025.DEPOSIT027.- 028.%- 029.+030.%+ 033.RF 034.VOID036.CPN2 037.VLD 038.RCT039.CK.E 040.# 041.#/NS v

Coffee $8.0012 ST $76.50

REG C01 15-12-97 12:34 001234 1 Spagetti $20.00 T1 1 Spagetti $20.00 T1 7.5% %- -1.50 1 Coffee $8.00 1 Hamburger $2.00 T1 15% %- -0.30 1 Milk $2.00 2 Apple Juice $5.00 1 Coffee $8.00

1 2nd@ AR

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer SA-3015 Slip Printer SA-3015 Rear Display No Remote Display No OK? YES

No. Descriptor Qty Price 1 PLU0001 @1,234.00 PLU0001 12.26 @1.00 2 PLU0002 @20.00 PLU0002 0.00 @2.00 3 PLU0003 @30.00 PLU0003 0.50 @3.00 4 PLU0004 @40.00 PLU0004 1.75 @4.00 5 PLU0005 @50.00 PLU0005 2.80 @5.00 6 PLU0006 @60.00v

0.00

Record No. 1X YESX/For YESX/XX YESX/XXX YESKetten Bon YESSelective Item ST YESNew Check YESOld Check YESNew/Old Check YESAdd Check YESSeparate Check YES

0.00

0.00

Table Range

Enter Start range 1 End range 123

OK? YES

Page 2: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

2

Preface

Document warranty

The information contained in this document is subject to change without notice.CASIO Computer Co., Ltd. makes no warranty of any kind with regard to this material,including, but not limited to the implied warranties of marketability and fitness for aparticular purpose. CASIO Computer Co., Ltd. shall not be liable for errors containedherein or for incidental or consequential damages in connection with the furnishing,performance, or use of this manual.

Printing history

Manual version Software versionVersion 1.0.0: May, 1997 First Edition: May, 1997 Version 1.00

Version 1.01Version 1.02

Version 1.1.0: November, 1997 Second Edition: November, 1997 Version 1.10Version 1.2.0: April, 1998 Third Edition: April, 1998 Version 1.20Version 2.2.0: June, 1998 Forth Edition: June, 1998 Version 2.00

Revised points

Version 1.01

1. Display the last 5 registered items when sign-on clerk is designated again in clerkinterrupt operation and when old check operation is performed.

2. Add graphic logo function.

Version 1.02

1. Add delete procedure of printer connection table.2. Add a procedure to copy PLU 1st unit price to 2nd unit price.

Version 1.1

1. Add an option to print/not print quantity and unit price in multiplication operation.2. Add a procedure to reprint receipts/reports/order when detecting printer error.3. Print/display J-Memo report by consecutive No. or date order even if the terminal cannot

find the appropriate data.4. Add Canadian tax and Singapore tax, Singapore rounding.5. Add <Tax exempt> function.6. Add <Selective item Subtotal> function.7. Add an option to cancel complete void/current only in <Cancel> key.8. Add an option to print/not print taxable amount 1-5 individually.

Version 1.2

1. Item selection by number without YES key. This can be programmed in generalmachine feature.

2. 2nd@ PLU to be pull down when 2nd@ key is pressed prior to the list key or after pressthe list key.

3. List stays down till you press ESC key.4. List has compulsory stay down instead of compulsory condiment.5. Jump to another List before any items are registered.6. One shot full escape or one step escape for set menu.7. Up to 3rd level entry for Set menu and pull down link.8. Set menu suspend and resume for beverages and sweets.(Post entry)9. Re-entry child PLUs in set menu and pull down link when it was voided.10.Item delete and Line delete11.Round repeat.

Page 3: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

3

Preface

QT-2000 Programming Manual

Version 2.0

1. Add the Time & Attendance function. This function allows shop owners to control his/her employee’s working conditions.

2. Add the Hourly Labor report function. This function is used to report each employee’shourly report and wages, and also analyze the working efficiency.

3. Add the IDC function. This function is used for capturing all the registered item data bythe REG/REF/REG-modes.

4. Add the Store/Recall function. These functions are used for the driving throughpurchase.

5. Add the Eat-in/Take-out function. By using Take-out key, the items can be exemptedfrom taxation.

Preconditions for reading this manual

We suggest two preconditions for reading this manual.1. A basic understanding of how the QT-2000 series devices must be configured/installed.2. An understanding of the operational needs of restaurant, bar, and/or fast food outlets.

How to use this manual

This manual is designed to help make your programming chores simpler and easier.Programming procedures in this manual are represented using graphics that show you thekeys you have to press or the data you need to input. Worksheets help you determine theprogramming codes you need to input to program the terminal. We recommend that youuse the general procedure described below for programming.

General programming procedure1. Determine the features and functions that you want to program to the terminal and use

the worksheets to determine the programming codes. It might be a good idea to makecopies of the worksheets you need before you fill them out.

2. Initialize the terminal.3. Allocate memory in accordance with the features and functions you are about to

program.4. Perform the programming procedures you need, inputting the programming code from

the worksheets.

Page 4: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

4

Contents

1. Machine Initialization .................................................................... 81-1. How to initialize QT-2000 terminal ................................................................ 81-2. How to initialize QT-2000 terminal (add/replace one QT-2000) .................. 111-3. How to flag clear QT-2000 terminal (INIT2, Restore from flash) ................. 14

2. Program 5 ....................................................................................162-1. Programming memory allocation (daily & program).................................... 162-2. Programming memory allocation (periodic & work) .................................... 172-3. Programming memory allocation file by file (Method 1) .............................. 182-4. Programming memory allocation file by file (Method 2) .............................. 19

3. Program 4 ....................................................................................243-1. Programming key allocation........................................................................ 243-2. Programming key allocation (key location change) .................................... 263-3. Programming key allocation (different function on the same location) ....... 28

4. Program 3 ....................................................................................324-1. Programming machine features .................................................................. 32

4-1-1 Programming pulldown group (adding/modifying/deleting group item) ......... 324-1-2 Programming set menu table ........................................................................ 344-1-3 Programming arrangement ........................................................................... 364-1-4 Programming batch X/Z report ...................................................................... 374-1-5 Programming the general feature .................................................................. 394-1-6 Programming scheduler ................................................................................ 564-1-7 Programming check print .............................................................................. 584-1-8 Programming table analysis .......................................................................... 594-1-9 Programming tax table .................................................................................. 604-1-10 Programming void table ................................................................................ 624-1-11 Programming system connection .................................................................. 634-1-12 Programming I/O parameter.......................................................................... 644-1-13 Programming printer connection ................................................................... 674-1-14 Programming time zone ................................................................................ 684-1-15 Programming Time & Attendance.................................................................. 69

4-1-16 Programming hourly item link ........................................................................ 754-1-17 Programming IDC link ................................................................................... 76

4-2. Programming clerks .................................................................................... 784-2-1 Programming clerk features .......................................................................... 784-2-2 Programming operation ................................................................................. 804-2-3 Programming commission rate ...................................................................... 904-2-4 Programming table range .............................................................................. 914-2-5 Programming clerk by range ......................................................................... 924-2-6 Programming cashier detail ......................................................................... 104

Page 5: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

5

Contents

QT-2000 Programming Manual

4-3. Programming key features ........................................................................ 1064-3-1. Programming PLU features ......................................................................... 1064-3-2 Programming PLU 2nd@ features .............................................................. 1084-3-3 Programming subdepartment features ........................................................ 1094-3-4 Programming department features.............................................................. 1104-3-5 Programming by range .................................................................................1114-3-6 Programming individual program ................................................................ 1144-3-7 Programming key function program ............................................................ 115

5. Program 2 .................................................................................. 1325-1. Character programming ............................................................................ 132

5-1-1 Character programming keyboard............................................................... 1325-1-2 Inputting characters by code ....................................................................... 1345-1-3 After completing to input characters ............................................................ 134

5-2. Programming item descriptors .................................................................. 1355-2-1 Programming PLU item descriptors ............................................................ 1355-2-2 Programming PLU 2nd unit price descriptors .............................................. 1365-2-3 Programming Subdepartment descriptors................................................... 1365-2-4 Programming Department descriptors ........................................................ 1375-2-5 Programming PLU/subdepartment/department descriptors by range ......... 1385-2-6 Copying PLU descriptors to PLU 2nd unit price .......................................... 1395-2-7 Programming function key descriptors ........................................................ 140

5-3. Programming characters and messages .................................................. 1415-3-1 Programming receipt message, slip message and guest receipt message 1415-3-2 Programming text recall message ............................................................... 1425-3-3 Programming order character link ............................................................... 1425-3-4 Programming fixed totalizer descriptors ...................................................... 1435-3-5 Programming text recall message ............................................................... 1445-3-6 Programming special characters ................................................................. 1445-3-7 Programming report headers ...................................................................... 1465-3-8 Programming endorsement message ......................................................... 1475-3-9 Programming GT character ......................................................................... 147

6. Program 1 .................................................................................. 1506-1. Presetting date and time ........................................................................... 1506-2. Programming unit price and rate............................................................... 151

6-2-1 Programming PLU unit price ....................................................................... 1516-2-2 Programming PLU 2nd unit price ................................................................ 1526-2-3 Programming PLU unit price and PLU 2nd unit price .................................. 1536-2-4 Programming subdepartment unit price ...................................................... 1546-2-5 Programming department unit price ............................................................ 1546-2-6 Programming PLU/PLU 2nd@/subdepartment/department unit price by range1556-2-7 Copying PLU unit price to PLU 2nd unit price ............................................. 1576-2-8 Programming amount or rate to keys .......................................................... 158

Page 6: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

6

Contents

7. Program 6 ..................................................................................1607-1. Program read general procedure .............................................................. 1607-2. Program read report sample ..................................................................... 161

7-2-1. Unit Price/Qty .............................................................................................. 1617-2-2. Item Descriptor ............................................................................................ 1627-2-3. Character and Message .............................................................................. 1627-2-4. Machine feature ........................................................................................... 1667-2-5. Clerk 1957-2-6. Key feature .................................................................................................. 2077-2-7. Keyboard ..................................................................................................... 2277-2-8. Memory allocation ....................................................................................... 227

8. Program 7 ..................................................................................2308-1. Program backup........................................................................................ 2308-2. Program restore ........................................................................................ 2318-3. J-Memo clear ............................................................................................ 2318-4. Data buckup list ........................................................................................ 232

Index .................................................................................................. 236Program 3 mode Hierarchy .................................................................................... 239Program 2 mode Hierarchy .................................................................................... 240Program 1 mode Hierarchy .................................................................................... 240Program 6 mode Hierarchy .................................................................................... 241

Page 7: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

7QT-2000 Programming Manual

1. Machine Initialization.................................................................... 81-1. How to initialize QT-2000 terminal ................................................................. 81-2. How to initialize QT-2000 terminal (add/replace one QT-2000) ................... 111-3. How to flag clear QT-2000 terminal (INIT2, Restore from flash) .................. 14

Page 8: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

8

Initialization

1. Machine Initialization

1-1. How to initialize QT-2000 terminal

Preparation:

1. All peripheral devices and QT-2000 terminals of this clustershould be turned off.

2. Connect all of the peripheral devices (such as printer, displayetc.) to QT-2000 terminal.

3. Connect all QT-2000 terminals by in-line.

Operation:4. Turn on all peripheral devices of a QT-2000 terminal.5. Turn on this QT-2000 terminal with pressing the left-most

key of the top row and release the key after buzzer sounds.6. After releasing the key, enter 10xxx (for Eu/Di)/20xxx (U.S.)

and press the right part of the <ST> key.

7. Enter the current date (YY/MM/DD order) and time andpress the <YES> key.

8. In ID character field, the auto-defined ID No. is shown.We recommend that you should not change the value.

9. In these fields, you can select “1.Master/2.Backup Master/3.Satellite.”Please select one of these options and press the <YES> key.

Date 00-00-00 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer SA-3015 Slip Printer SA-3015 Rear Display No Remote Display No OK? Yes

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Page 9: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

9QT-2000 Programming Manual

10. In this field, you can select, “1.Non/2.UP-350/3.SA-3015”for R/J/Order printer.Please select one of these options and press the <YES> key.

11. In this field, you can select, “1.Non/2.SA-3015/3.SP-1200”for slip printer.Please select one of these options and press the <YES> key.

13. Please confirm all of the field and if they are all right, pressthe <YES> key to proceed the next step.

14. If you want to download program data from other terminal,press the <YES> key and proceed the next step.

If you don't need to download any program data, just press the<NO> key (the initialization of this terminal is completed).Return to step 4 to initialize other terminals.

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

INIT 97-12-17 12:34 000000 AUTO PGM Start YES

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Page 10: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

10

Initialization

Program copy from other terminal.

15. In this field, you can select the receiving contents as “1.AllData (including totalizer)/2.All PGM (program only).”

16. In this field, you should enter the source ID number of the dataand press the <YES> key.

17. Please confirm all of the fields and if they are all right, pressthe <YES> key to proceed downloading.After completion of downloading, return to step 4 to initializeother terminals.

INIT 97-12-15 12:34 000000

Received Data All PGM PGM Receive from MC #05

OK? YES

INIT 97-12-15 12:34 000000

Received Data All PGM PGM Receive from MC #05

OK? YES

INIT 97-12-15 12:34 000000

Received Data All PGM PGM Receive from MC #05

OK? YES

Page 11: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

11QT-2000 Programming Manual

1-2. How to initialize QT-2000 terminal (add/replace one QT-2000)

Preparation:

1. All peripheral devices and QT-2000 terminals of this clustershould be turned off.

2. Connect all of the peripheral devices (such as printer, displayetc.) to this QT-2000 terminal.

3. Connect this QT-2000 terminal to in-line.

Operation:4. Turn on all peripheral devices of this QT-2000 terminal.

And turn on all QT-2000 except this terminal of the cluster.5. Turn on this QT-2000 terminal with pressing the left-most

key of the top row and release the key after buzzer sounds.6. After releasing the key, enter 10000 (for Eu/Di)/20000 (U.S.)

and press the right part of the <ST> key.

7. Enter the current date (YY/MM/DD order) and time andpress the <YES> key.

8. In ID character field, the auto-defined ID No. is shown.Please check if the same value is set in this field.We recommend that you should not change the value.

9. In these fields, you can select “1.Master/2.Backup Master/3.Satellite.”Please choose former options and press the <YES> key.

10. In this field, you can select, “1.Non/2.UP-350/3.TM-U950”for R/J/Order printer.Please choose former option and press the <YES> key.

Date 00-00-00 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer SA-3015 Slip Printer SA-3015 Rear Display No Remote Display No OK? Yes

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Page 12: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

12

Initialization

11. In this field, you can select, “1.Non/2.SA-3015/3.SP-1200”for slip printer.Please choose former options and press the <YES> key.

12.Please confirm all of the field and if they are all right, press the<YES> key to proceed the next step.

13. If you want to download program data from other terminal,press the <YES> key and proceed the next step.

If you don't need to download any program data, just press the<NO> key (the initialization is completed).

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

Date 97-12-15 Time 12:34 00

ID Character MC #01 Check System Master KP System Master R/J/Order Printer(1) UP-350 R/J/Order Printer(2) UP-350 Slip Printer SP-1200 OK? YES

INIT 97-12-17 12:34 000000 AUTO PGM Start YES

Page 13: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

13QT-2000 Programming Manual

Program copy from other terminal.

15. In this field, you can select the receiving contents as “1.AllData (including totalizer)/2.All PGM (program only).”

16. In this field, you should enter the source ID number of the dataand press the <YES> key.

17. Please confirm all of the fields and if they are all right, pressthe <YES> key to proceed downloading.After completion of downloading, the initialization opera-tion is finished.

INIT 97-12-15 12:34 000000

Received Data All PGM PGM Receive from MC #05

OK? YES

INIT 97-12-15 12:34 000000

Received Data All PGM PGM Receive from MC #05

OK? YES

INIT 97-12-15 12:34 000000

Received Data All PGM PGM Receive from MC #05

OK? YES

Page 14: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

14

Initialization

1-3. How to flag clear QT-2000 terminal (INIT2, Restore from flash)

Preparation:

1. All peripheral devices and this QT-2000 terminal should beturned off.

2. Check the connection of all peripheral devices (such asprinter, display etc.) of this QT-2000 terminal.

3. Check the connection of this QT-2000 terminal to in-line.

Operation:4. Turn on all peripheral devices of this QT-2000 terminal.5. Turn on this QT-2000 terminal with pressing the right-most

key of the top row and release the key after buzzer sounds.6. After releasing the key, press the right part of the <ST> key.

7. Select "1.Flag Clear" and press the <YES> key.The flag clear operation is finished.

Note:Performing “Init 2” requires password “8888888888” and performing “Restore” requirespassword “0000000000.”

0.00

15-12-97 12:34

INIT 1.Flag Clear 2.Init2 3.Restore

Page 15: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

15QT-2000 Programming Manual

2. Program 5 .................................................................................... 162-1. Programming memory allocation (daily & program) ..................................... 162-2. Programming memory allocation (periodic & work) ..................................... 172-3. Programming memory allocation file by file (Method 1) ............................... 182-4. Programming memory allocation file by file (Method 2) ............................... 19

Page 16: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

16

Program 5

2. Program 5

2-1. Programming memory allocation (daily & program)

Operation:

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly to assign Program 5 mode.

3. Select “1.Daily & PGM” and press the <YES> key.

4. Select an appropriate file, enter the record numbers you wantto allocate and press the <YES> key.The lowest row shows the remaining memory.

5. Press the <ESC> key to return to the previous menu.

0.00

Memory Alloc

Memory Alloc 1.Daily & PGM 2.Periodic & Work 3.Individual File

0.00

P5 C01 15-12-97 12:34 000000

PGM-5 1.Memory Alloc

0.00

Daily & PGMHourly Production 0^Hourly Labor 0Employee 0Job Code 0IDC Link 0IDC(1) 0IDC(2) 0IDC(3) 0

RAM 22688 + 0

0.00

Daily & PGMCashier/Clerk 15Check Tracking Tables 3 Items/Table 60Table Analysis 10PLU 3242nd@ PLU 324Pulldown Group 20Setmenu Table 30v

RAM 22688 + 0

The remainder in C driveThe remainder in D drive

0.00

Daily & PGMMix&Match/Coupon 0^Time Zone 0Hourly Production 0Hourly Labor 0Employee 0Job Code 0IDC Link 0IDC (1) 0v

RAM 22688 + 0

0.00

Daily & PGMSub-Department 0^Department 4Group 20Receipt/SLIP Msg 12Text Recall 99Order Chara Link 10Void File 10Free Function 100v

RAM 22688 + 0

Page 17: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

17QT-2000 Programming Manual

2-2. Programming memory allocation (periodic & work)

Operation:

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly to assign Program 5 mode.

3. Select “2.Periodic & Consolidation” and press the <YES> key.

4. Select an appropriate record and press the <YES> (allocate)or <NO> (not allocate) key.

5. Press the <ESC> key to return to the previous menu.

Note:The Flag Clear operation resets “YES” status. However it does not re-allocate the files thatwere already allocated on this screen.

0.00

Memory Alloc

Memory Allocation 1.Daily & PGM 2.Periodic & Work 3.Individual File

0.00

Periodic & WorkPLUPeriodic(1) Totalizer YesPeriodic(2) Totalizer NoConsolidation & Work YesExcept PLUPeriodic(1) Totalizer YesPeriodic(2) Totalizer NoConsolidation & Work Yes

RAM 22688 + 0

0.00

P5 C01 15-12-97 12:34 000000

PGM-5 1.Memory Alloc

Page 18: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

18

Program 5

2-3. Programming memory allocation file by file (Method 1)

If you want to allocate files file by file, the procedures below helps you.

Operation:

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly to assign Program 5 mode.3. Enter the File code, press the right part of the <ST> key, enter

the Rec. No. and press the right part of the <CA> key.4. Repeat the step 3 until you have programmed all files you want

to allocate.5. Press the <ESC> key to return to the previous menu.

File codeFile code (D

4D

3D

2D

1)

consists of two parts.

0.00

P5 C01 15-12-97 12:34 000000

PGM-5 1.Memory Alloc

tigiD eulaV gninaeM

D4

0 yllacitamotuaevridDroCnietacollA1 evirdCnietacollA2 evirdDnietacollA

D3

D~1

nnn )segapgniwollofehteeS(rebmuneliF

Page 19: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

19QT-2000 Programming Manual

2-4. Programming memory allocation file by file (Method 2)

If you want to allocate files file by file, follow the procedures below.

Operation:

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly to assign Program 5 mode.

3. Select “3.Individual File” and press the <YES> key.

4. Select the file number you want to change and enter recordnumber you want to allocate (“0” means file deletion).

5. Press the <ESC> key to return to the previous menu.

0.00

P5 C01 15-12-97 12:34 000000

PGM-5 1.Memory Alloc

0.00

Memory Alloc

Memory Allocation 1.Daily & PGM 2.Periodic & Work 3.Individual File

0.00

Individual FileFILE001 59FILE101 59FILE201 0FILE301 59FILE401 59FILE501 0FILE601 59FILE002 70

RAM 612 + 0

Page 20: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

20

Program 5

eliF.oN

noitpircsedeliFdroceRhtgnel

.oN.xaMsdrocerfo

kroWezis

noitpircseD-ubirttA

noit-tacollA

elba-kcaB

puselifmetsyS

109 elbatnoitcennocmetsyS 81 33 57 margorP oN seY209 retemarapO/I 5 01 96 margorP oN seY309 noitcennocretnirP 72 99 18 margorP oN seY409 rebmunevitucesnoC 3 1 96 reffuB oN seY999 golrorremetsyS 11 999 99 reffuB oN seY

seliflatotdnanoitcnuF

100 rezilatotdexiF 62 95 18 elaS/mgP seY seY101 )1latotcidoirep( 01 95 57 selaS seY seY102 )2latotcidoirep( 01 95 57 selaS seY seY103 )noitadilosnocyliad( 01 95 57 retsamrof selaS seY oN104 )noitadilosnoc1cidoirep( 01 95 57 retsamrof selaS seY oN105 )noitadilosnoc2cidoirep( 01 95 57 retsamrof selaS seY oN106 )krownoitadilosnoc( 01 95 57 retsamrof reffuB seY oN200 noitcnufeerF 83 999 99 elaS/mgP seY seY201 )1latotcidoirep( 01 999 57 selaS seY seY202 )2latotcidoirep( 01 999 57 selaS seY seY203 )noitadilosnocyliad( 01 999 57 retsamrof selaS seY oN204 )noitadilosnoc1cidoirep( 01 999 57 retsamrof selaS seY oN205 )noitadilosnoc2cidoirep( 01 999 57 retsamrof selaS seY oN206 )krownoitadilosnoc( 01 999 57 retsamrof reffuB seY oN300 tnemtrpapedbuS 45 99 531 elaS/mgP seY seY301 )1latotcidoirep( 51 99 18 selaS seY seY302 )2latotcidoirep( 51 99 18 selaS seY seY303 )noitadilosnocyliad( 51 99 18 retsamrof selaS seY oN304 )noitadilosnoc1cidoirep( 51 99 18 retsamrof selaS seY oN305 )noitadilosnoc2cidoirep( 51 99 18 retsamrof selaS seY oN306 )krownoitadilosnoc( 51 99 18 retsamrof reffuB seY oN400 ULP 29 9999 771 elaS/mgP seY seY500 tnemtrapeD 45 99 531 elaS/mgP seY seY501 )1latotcidoirep( 51 99 18 selaS seY seY502 )2latotcidoirep( 51 99 18 selaS seY seY503 )noitadilosnocyliad( 51 99 18 retsamrof selaS seY oN504 )noitadilosnoc1cidoirep( 51 99 18 retsamrof selaS seY oN505 )noitadilosnoc2cidoirep( 51 99 18 retsamrof selaS seY oN506 )krownoitadilosnoc( 51 99 18 retsamrof reffuB seY oN600 puorG 62 99 18 elaS/mgP seY seY601 )1latotcidoirep( 01 99 57 selaS seY seY602 )2latotcidoirep( 01 99 57 selaS seY seY603 )noitadilosnocyliad( 01 99 57 retsamrof selaS seY oN604 )noitadilosnoc1cidoirep( 01 99 57 retsamrof selaS seY oN605 )noitadilosnoc2cidoirep( 01 99 57 retsamrof selaS seY oN606 )krownoitadilosnoc( 01 99 57 retsamrof reffuB seY oN900 selasylruoH 02 999 78 elaS/mgP seY seY901 )1latotcidoirep( 02 999 78 selaS seY seY902 )2latotcidoirep( 02 999 78 selaS seY seY903 )noitadilosnocyliad( 02 999 78 retsamrof selaS seY oN904 )noitadilosnoc1cidoirep( 02 999 78 retsamrof selaS seY oN905 )noitadilosnoc2cidoirep( 02 999 78 retsamrof selaS seY oN906 )krownoitadilosnoc( 02 999 78 retsamrof reffuB seY oN010 selasylhtnoM 02 23 78 elaS/mgP seY seY011 )1latotcidoirep( 02 23 78 selaS seY seY012 )2latotcidoirep( 02 23 78 selaS seY seY013 )noitadilosnocyliad( 02 23 78 retsamrof selaS seY oN014 )noitadilosnoc1cidoirep( 02 23 78 retsamrof selaS seY oN015 )noitadilosnoc2cidoirep( 02 23 78 retsamrof selaS seY oN

Page 21: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

21QT-2000 Programming Manual

eliF.oN

noitpircsedeliFdroceRhtgnel

.oN.xaMsdrocerfo

kroWezis

noitpircseD-ubirttA

noit-tacollA

elba-kcaB

pu016 )krownoitadilosnoc( 02 23 78 retsamrof reffuB seY oN210 nosaerdioV 92 99 78 elaS/mgP seY seY211 )1latotcidoirep( 01 99 57 selaS seY seY212 )2latotcidoirep( 01 99 57 selaS seY seY213 )noitadilosnocyliad( 01 99 57 retsamrof selaS seY oN214 )noitadilosnoc1cidoirep( 01 99 57 retsamrof selaS seY oN215 )noitadilosnoc2cidoirep( 01 99 57 retsamrof selaS seY oN216 )krownoitadilosnoc( 01 99 57 retsamrof reffuB seY oN810 sisylanaelbaT 23 9999 39 elaS/mgP seY seY811 )1latotcidoirep( 01 9999 57 selaS seY seY812 )2latotcidoirep( 01 9999 57 selaS seY seY813 )noitadilosnocyliad( 01 9999 57 retsamrof selaS seY oN814 )noitadilosnoc1cidoirep( 01 9999 57 retsamrof selaS seY oN815 )noitadilosnoc2cidoirep( 01 9999 57 retsamrof selaS seY oN816 )krownoitadilosnoc( 01 9999 57 retsamrof reffuB seY oN020 latotdnarG 42 3 57 elaS/mgP seY seY021 )1latotcidoirep( 8 3 96 selaS seY seY022 )2latotcidoirep( 8 3 96 selaS seY seY023 )noitadilosnocyliad( 8 3 96 retsamrof selaS seY oN024 )noitadilosnoc1cidoirep( 8 3 96 retsamrof selaS seY oN025 )noitadilosnoc2cidoirep( 8 3 96 retsamrof selaS seY oN026 )krownoitadilosnoc( 8 3 96 retsamrof reffuB seY oN

krelC700 krelC 59 99 561 margorP seY seY030 knilliatedkrelC 4 021 57 margorP seY seY110 liatedkrelC 01 99 57 selaS seY seY111 )1latotcidoirep( 01 99 57 selaS seY seY112 )2latotcidoirep( 01 99 57 selaS seY seY113 )noitadilosnocyliad( 01 99 57 retsamrof selaS seY oN114 )noitadilosnoc1cidoirep( 01 99 57 retsamrof selaS seY oN115 )noitadilosnoc2cidoirep( 01 99 57 retsamrof selaS seY oN116 )krownoitadilosnoc( 01 99 57 retsamrof reffuB seY oN

ecnadnettA&emiT410 robaL/ylruoH 62 69 margorP seY seY411 )1latotcidoirep( 62 69 selaS seY seY412 )2latotcidoirep( 62 69 selaS seY seY413 )noitadilosnocyliad( 62 69 retsamrof selaS seY seY414 )noitadilosnoc1cidoirep( 62 69 retsamrof selaS seY seY415 )noitadilosnoc2cidoirep( 62 69 retsamrof selaS seY seY416 )krownoitadilosnoc( 62 69 retsamrof selaS seY seY910 emiTkroW 71 9999 margorP seY seY911 )1latotcidoirep( 71 9999 selaS seY seY912 )2latotcidoirep( 71 9999 selaS seY seY913 )noitadilosnocyliad( 71 9999 retsamrof selaS seY seY914 )noitadilosnoc1cidoirep( 71 9999 retsamrof selaS seY seY915 )noitadilosnoc2cidoirep( 71 9999 retsamrof selaS seY seY916 )krownoitadilosnoc( 71 9999 retsamrof selaS seY seY008 enoZemiT 6 42 margorP seY seY108 eeyolpmE 53 99 margorP seY seY208 edocboJ 22 05 margorP seY seY308 eludehcS 11 999 margorP seY seY608 krowecnadnettA&emiT 1 99kcehC

510 xednIkcehC margorP seY seY060 liatedkcehC margorP seY seY660 krowliatedkcehC selaS seY seY

Page 22: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

22

Program 5

eliF.oN

noitpircsedeliFdroceRhtgnel

.oN.xaMsdrocerfo

kroWezis

noitpircseD-ubirttA

noit-tacollA

elba-kcaB

pumetIylruoH

120 metIylruoH 01 0291 margorP seY seY121 )1latotcidoirep( 01 0291 margorP seY seY122 )2latotcidoirep( 01 0291 margorP seY seY123 )noitadilosnocyliad( 01 0291 retsamrof margorP seY seY124 )noitadilosnoc1cidoirep( 01 0291 retsamrof margorP seY seY125 )noitadilosnoc2cidoirep( 01 0291 retsamrof margorP seY seY126 )krownoitadilosnoc( 01 0291 retsamrof margorP seY seY130 kniLmetIylruoH 4 084 margorP seY seY

CDI750 )1(CDI 05 9999 selaS seY seY753 )elifnoitadilosnoc( 05 9999 retsamrof selaS seY seY756 )krownoitadilosnoc( 05 9999 retsamrof selaS seY seY850 )2(CDI 05 9999 selaS seY seY853 )elifnoitadilosnoc( 05 9999 retsamrof selaS seY seY856 )krownoitadilosnoc( 05 9999 retsamrof selaS seY seY950 )3(CDI 05 9999 selaS seY seY953 )elifnoitadilosnoc( 05 9999 retsamrof selaS seY seY956 )krownoitadilosnoc( 05 9999 retsamrof selaS seY seY360 reffuBCDI 05 9999 reffuB seY seY408 knilCDI 6 999 margorP seY seY

reffub/egassem/margorP220 lortnoclareneG 6 43 96 margorP oN seY320 retcarahclaicepS 61 82 96 margorP oN seY420 redaehtropeR 61 71 96 margorP oN seY520 elbatxaT 8 5 39 margorP seY seY620 puorgnwodlluP 301 9999 981 margorP seY seY820 elbatunemteS 08 999 381 margorP seY seY920 Z/XhctaB 9 01 96 margorP seY seY230 egassempils/tpieceR 04 74 96 margorP seY seY330 egassemesrodnE 04 4 96 margorP seY seY530 reffubtnirP 77 999 96 reffuB seY oN630 reffubnoitartsigeR 07 004 96 reffuB seY oN730 reffubdiovllA 02 9999 96 DO TON ETELED B reffu Y SE NO

930 llacerretcarahC 04 9999 96 margorP seY seY140 tnirpkcehC 3 9 96 margorP seY seY340 reffubyalpsidyromemlanruoJ 04 999 96 reffuB seY oN440 reffubyalpsiD 04 999 96 reffuB seY oN740 ogolcihparG 31 234 96 margorP seY seY840 reffubyromemlanruoJ 14 002 96 reffuB seY oN450 @dn2ULP 24 9999 99 margorP seY seY260 reludehcS 41 99 57 margorP seY seY560 retcarahcredrO 61 99 96 margorP seY seY470 elbatyeK 63 291 171 margorP oN seY

tnemegnarrA830 )1(puorgegnarrA 42 9999 96 margorP seY seY831 )2(puorgegnarrA 42 9999 96 margorP seY seY832 )3(puorgegnarrA 42 9999 96 margorP seY seY833 )4(puorgegnarrA 42 9999 96 margorP seY seY834 )5(puorgegnarrA 42 9999 96 margorP seY seY

Page 23: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

23QT-2000 Programming Manual

3. Program 4 ..................................................................................... 243-1. Programming key allocation ......................................................................... 243-2. Programming key allocation (key location change) ..................................... 263-3. Programming key allocation (different function on the same location)......... 28

Page 24: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

24

Program 4

3. Program 4

3-1. Programming key allocation

Operation:

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly to assign Program 4 mode.

3. Select “1.Key Assign” and press the <YES> key.

4. Select an appropriate function and press the <YES> key.Then press the corresponding key.Or select an appropriate function by the function code list (seethe next page) and press the corresponding key.

5. Press the <ESC> key to return to the previous menu.

0.00

Key Board

Key Board 1.Key Assign 2.Key Move

0.00

Key Assign000.NOP 001.CASH 002.CHARGE003.CHECK 004.CREDIT 006.NB008.PRCINQ 009.STKINQ 010.CHAR011.PRT 012.CHKP 013.CLK TRAN014.TBL TRAN 015.TIP 016.NRMRCT019.LOAN 020.RC 021.PD022.P.UP. 023.COUPON 025.DEPOSIT027.- 028.%- 029.+030.%+ 033.RF 034.VOID036.CPN2 037.VLD 038.RCT039.CK.E 040.# 041.#/NS v

0.00

P4 C01 15-12-97 12:34 000000

PGM4 1.Key Board

Page 25: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

25QT-2000 Programming Manual

noitcnuF edoC retcarahclaitinI noitcnuF edoC retcarahclaitinIkcehcddA 490 KHCDDA nepO 760 NEPO

tnemegnarrA 440 GRA 2nepO 860 2NEPO

ypoclliB 740 LLIB kcehCnepO 711 KHCNEPO

tuo/ni-kaerB 901 TUO/NI-KAERB rebmunrotarepO 870 #EPO

lecnaC 632 LECNAC teser/daerrotarepO 370 Z/XEPO

derednettnuomahsaC 100 HSAC nwodegaP 022 NWODEGAP

egrahC 200 EGRAHC puegaP 122 PUEGAP

tnemesrodnekcehC 930 E.KC tuodiaP 120 DP

tnirpkcehC 210 PKHC pukciP 220 PU.P

rednetkcehC 300 KCEHC sulP 920 +

rebmunkrelC 270 #KLC ULP 840 #ULP

refsnartkrelC 310 SNARTKLC yrtnEtsoP 511 YRTNETSOP

tuo/ni-kcolC 801 TUO/NI-KCOLC edommargorP 321 EDOMMGP

nopuoC 320 NOPUOC muimerP 030 +%

2nopuoC 630 2NPC yriuqniecirP 800 QNICRP

tiderC 400 TIDERC ecirP 940 CRP

ebuC 090 XXX roF/ytitnauQ 380 TQ

egnahcxeycnerruC 540 EC llaceR 131 LLACER

rebmunremotsuC 340 TC tpieceR 830 TCR

tnioplamiceD 890 . FFO/nOtpieceR 670 FFO/NOTCR

)erutuf(noitaralceD 150 ALCED tnuoccanodevieceR 020 CR

tnemtrapeD 150 TPED dnufeR 330 FR

rebmuntnemtrapeD 531 #TPED edomretsigeR 121 EDOMGER

tisopeD 520 TISOPED yalpsiDesreveR 602 ESREVER

tnuocsiD 820 –% taepeRdnuoR 611 TAEPERR

edomyalpsiD 912 EDOMPSID rebmuntaeS 911 #TAES

ffO/nOyalpsiD 021 FFO/NOPSID ecirptinudnoceS 070 @dn2

ni-taE 821 NI-TAE latotbusmetievitceleS 580 TSIS

)erutuf(tuo/nitnE 501 TNE kcehcetarapeS 590 KHCPES

dioV/tcerrocrorrE 430 DIOV esaeleR/deefkcabpilS 450 R/BS

ecirptinutsriF 960 @ts1 esaeleR/deefpilS 650 R/FS

ULPtalF 360 ULP nnn tnirppilS 550 PILS

noitisopemoH 812 EMOH erauqS 480 XX

noBesuoH 411 NOBESUOH yriuqnikcotS 900 QNIKTS

psiDomeM-J 702 OMEMJ erotS 031 EROTS

noBnetteK 311 NETTEK/X tnemtrapedbuS 331 nnTPEDBUS

tsiL 631 TSIL rebmuntnemtrapedbuS 431 #TPDS

rebmuntsiL 731 #TSIL noitutitsbuS 111 .TSBUS

naoL 910 NAOL latotbuS 570 LATOTBUS

yekdesunutuokcoL 000 PON rebmunelbaT 850 #LBT

egnahcaideM 811 GHCAIDEM refsnartelbaT 410 SNRTLBT

tfihsuneM 460 UNEM tuo-ekaT 921 TUO-EKAT

latotbusesidnahcreM 080 TSDM tfihssutatsxaT 750 S/T

suniM 720 – latotbustnuomaelbaxaT 770 TSAT

noitacilpitluM 280 X tpmexexaT 260 TPMEXE

ecnalabweN 600 BN tnirptxeT 110 TRP

kcehcweN 190 KHCWEN llacertxeT 010 RAHC

kcehcdlO/weN 390 DLO/WEN orezeerhT 1022100 000

tpiecerlamroN 610 TCRMRN orezowT 1021100 00

elasoN 240 SN piT 510 PIT

dda-noN 040 # noitadilaV 730 DLV

elasoN/dda-noN 140 SN/# TAV 640 TAV

kcehcdlO 290 KHCDLO edomZ/X 221 EDOMZ/X

Page 26: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

26

Program 4

3-2. Programming key allocation (key location change)

Operation:

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly to assign Program 4 mode.

3. Select “2.Key Move” and press the <YES> key.

4. Press the first key you want to change.

5. Press the second key you want to change.

0.00

Key Board

Key Board 1.Key Assign 2.Key Move

0.00

Key Move

Please Press the key which you want to move.

0.00

Key Move

Press the new position of the key.

0.00

P4 C01 15-12-97 12:34 000000

PGM4 1.Key Board

Page 27: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

27QT-2000 Programming Manual

6. Press the <YES> key after confirmation.7. Press <ESC> key to return to the previous menu.

Keyboard layoutThe shadowed key cannot be programmed with any other functions.

ESC/SKIPC

7

4

1

0

X

8

5

2

00YES

NO

COVERS 9

6

3

9

8

7

6

5

4

3

2

1

18

17

16

15

14

13

12

11

10

27

26

25

24

23

22

21

20

19

36

35

34

33

32

31

30

29

28

45

44

43

42

41

40

39

38

37

54

53

52

51

50

49

48

47

46

63

62

61

60

59

58

57

56

55

72

71

70

69

68

67

66

65

64

81

80

79

78

77

76

75

74

73

90

89

88

87

86

85

84

83

82

99

98

97

96

95

94

93

92

91

108

107

106

105

104

103

102

101

100

DISPON/OFF

REG.MODE

X/ZMODE

PGM.MODE

NEW/OLDCHK

ADDCHK

SEPCHK

HOUSEBON

SEATNo.

CLK#1

CLK#5

CLK#4

CLK#3

CLK#2

RC PD

VAT

%--

SUBST.

CH

CR

CHK

NB

VOID CANCEL

GUESTRECEIPT

TABLETRANS

MENUSHIFT

CASH AMTTEND

#/NS

HOME

PAGEUP

PAGEDOWN

SUB TOTAL

0.00

Key Move

CASH <-> CHARGE Move OK? (YES/NO)

Page 28: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

28

Program 4

3-3. Programming key allocation (different function on the same location)

Programming different function on the same location of the different menu sheet.

Operation:First of all, programming one function on one menu sheet by the method of Section 3-1.Next, issue “5.Function Key” report in the “6.Key Feature” of the “PGM Read Report”in PGM 6 mode.And open the function key allocation screen.

1. Sign on a clerk (if necessary).

2. Press <PGM MODE> repeatedly to assign Program 4 mode.

3. Select “1.Key Assign” and press the <YES> key.

4. Enter the appropriate record number (in 4-digits) and functioncode (in 3-digits) and press the corresponding key on theappropriate menu sheet.

5. Press the <ESC> key to return to the previous menu.

0.00

Key Board

Key Board 1.Key Assign 2.Key Move

0.00

P4 C01 15-12-97 12:34 000000

PGM4 1.Key Board

00150.20

Key Assign000.NOP 001.CASH 002.CHARGE003.CHECK 004.CREDIT 006.NB008.PRCINQ 009.STKINQ 010.CHAR011.PRT 012.CHKP 013.CLK TRAN014.TBL TRAN 015.TIP 016.NRMRCT019.LOAN 020.RC 021.PD022.P.UP. 023.COUPON 025.DEPOSIT027.- 028.%- 029.+030.%+ 033.RF 034.VOID036.CPN2 037.VLD 038.RCT039.CK.E 040.# 041.#/NS v

Page 29: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

29QT-2000 Programming Manual

4. Program 3 ..................................................................................... 324-1. Programming machine features ................................................................... 32

4-1-1 Programming pulldown group (adding/modifying/deleting group item) ............. 324-1-2 Programming set menu table ............................................................................ 344-1-3 Programming arrangement ............................................................................... 364-1-4 Programming batch X/Z report .......................................................................... 374-1-5 Programming the general feature ..................................................................... 394-1-5-1 Programming the machine control 1 ................................................................. 394-1-5-3 Programming the machine control 3 ................................................................. 424-1-5-4 Programming the machine control 4 ................................................................. 434-1-5-5 Programming the print control........................................................................... 444-1-5-6 Programming the report control 1 ..................................................................... 454-1-5-7 Programming the report control 2 ..................................................................... 464-1-5-8 Programming the communication ..................................................................... 474-1-5-9 Programming the hourly sales .......................................................................... 484-1-5-10 Programming the SLIP/Guest ........................................................................... 484-1-5-11 Programming the journal control ....................................................................... 494-1-5-12 Programming the message control ................................................................... 504-1-5-13 Programming the order control ......................................................................... 504-1-5-14 Programming the set menu/condiment ............................................................. 514-1-5-15 Programming the check tracking ...................................................................... 524-1-5-16 Programming the clerk interrupt........................................................................ 524-1-5-17 Programming the display control ...................................................................... 534-1-5-18 Programming the menu shift 1 .......................................................................... 544-1-5-19 Programming the menu shift 2 .......................................................................... 554-1-6 Programming scheduler .................................................................................... 564-1-7 Programming check print .................................................................................. 584-1-8 Programming table analysis.............................................................................. 594-1-9 Programming tax table ...................................................................................... 604-1-10 Programming void table .................................................................................... 624-1-11 Programming system connection...................................................................... 634-1-12 Programming I/O parameter ............................................................................. 644-1-13 Programming printer connection ....................................................................... 674-1-14 Programming time zone .................................................................................... 684-1-15 Programming Time & Attendance ..................................................................... 694-1-15-1 Programming Time & Attendance (General) .................................................... 694-1-15-2 Programming Time & Attendance (Job Code) .................................................. 714-1-16 Programming hourly item link ........................................................................... 754-1-17 Programming IDC link ....................................................................................... 76

4-2. Programming clerks ..................................................................................... 784-2-1 Programming clerk features .............................................................................. 784-2-2 Programming operation .................................................................................... 804-2-2-1 Programming clerk control ................................................................................ 804-2-2-2 Programming menu shift/2nd@ ........................................................................ 814-2-2-3 Programming mode control............................................................................... 824-2-2-4 Programming function control 1 ........................................................................ 834-2-2-5 Programming function control 2 ........................................................................ 844-2-2-6 Programming function control 3 ........................................................................ 854-2-2-7 Programming function control 4 ........................................................................ 86

Page 30: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

30

Program 3

4-2-2-8 Programming function control 5 ........................................................................ 874-2-2-9 Programming arrangement control ................................................................... 884-2-2-10 Programming X/Z report control........................................................................ 894-2-3 Programming commission rate ......................................................................... 904-2-4 Programming table range ................................................................................. 914-2-5 Programming clerk by range ............................................................................. 924-2-5-1 Programming clerk control by range ................................................................. 924-2-5-2 Programming menu shift/2nd@ by range ......................................................... 934-2-5-3 Programming mode control by range................................................................ 944-2-5-4 Programming function control 1 by range ......................................................... 954-2-5-5 Programming function control 2 by range ......................................................... 964-2-5-6 Programming function control 3 by range ......................................................... 974-2-5-7 Programming function control 4 by range ......................................................... 984-2-5-8 Programming function control 5 by range ......................................................... 994-2-5-9 Programming arrangement control by range .................................................. 1004-2-5-10 Programming X/Z report control by range....................................................... 1014-2-5-11 Programming commission rate by range ........................................................ 1024-2-5-12 Programming table range by range ................................................................ 1034-2-6 Programming cashier detail ............................................................................ 104

4-3. Programming key features ......................................................................... 1064-3-1. Programming PLU features ............................................................................ 1064-3-2 Programming PLU 2nd@ features .................................................................. 1084-3-3 Programming subdepartment features ........................................................... 1094-3-4 Programming department features ................................................................. 1104-3-5 Programming by range ....................................................................................1114-3-5-1 General procedure of PLU, PLU 2nd@, subdepartment, department by range1124-3-5-2 Programming hierarchy of programming title .................................................. 1134-3-6 Programming individual program .................................................................... 1144-3-7 Programming key function program................................................................ 1154-3-7-1 Worksheet for cash, charge, credit and check ................................................ 1164-3-7-3 Worksheet for character print, character recall ............................................... 1174-3-7-2 Worksheet for new balance ............................................................................ 1174-3-7-4 Worksheet for check print ............................................................................... 1184-3-7-5 Worksheet for clerk transfer ............................................................................ 1184-3-7-6 Worksheet for table transfer ............................................................................ 1184-3-7-7 Worksheet for tip ............................................................................................. 1184-3-7-8 Worksheet for loan, pick up ............................................................................ 1194-3-7-9 Worksheet for received on account, paid out .................................................. 1194-3-7-10 Worksheet for plus, minus, coupon ................................................................. 1204-3-7-12 Worksheet for void .......................................................................................... 1214-3-7-13 Worksheet for check endorsement ................................................................. 1214-3-7-11 Worksheet for deposit+, deposit– ................................................................... 1214-3-7-14 Worksheet for discount, premium ................................................................... 1224-3-7-15 Worksheet for receipt ...................................................................................... 1234-3-7-16 Worksheet for non-add, non-add/NS .............................................................. 1234-3-7-17 Worksheet for customer .................................................................................. 1244-3-7-18 Worksheet for arrangement ............................................................................ 1244-3-7-19 Worksheet for currency exchage .................................................................... 1254-3-7-20 Worksheet for slip ........................................................................................... 1254-3-7-21 Worksheet for T/S, TAST ................................................................................ 125

Page 31: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

31QT-2000 Programming Manual

4-3-7-22 Worksheet for menu........................................................................................ 1264-3-7-23 Worksheet for open 2...................................................................................... 1264-3-7-24 Worksheet for clerk number ............................................................................ 1274-3-7-25 Worksheet for operator X/Z............................................................................. 1274-3-7-26 Worksheet for subtotal, merchandise subtotal ................................................ 1274-3-7-27 Worksheet for cancel ...................................................................................... 1284-3-7-28 Worksheet for multiplication, quantity/for, square, cube, Ketten Bon.............. 1284-3-7-29 Worksheet for selective item subtotal (future) ................................................. 1284-3-7-30 Worksheet for open check .............................................................................. 1284-3-7-31 Worksheet for list ............................................................................................ 1284-3-7-32 Worksheet for tax exempt ............................................................................... 1294-3-7-34 Worksheet for break-in/break-out ................................................................... 1294-3-7-33 Worksheet for clock-in/clock-out ..................................................................... 1294-3-7-36 Worksheet for store......................................................................................... 1304-3-7-35 Worksheet for eat-in/take-out.......................................................................... 130

Page 32: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

32

Program 3

4. Program 3

4-1. Programming machine features

Preparation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> repeatedly to assign Program 3 mode.

3. Select “1.Machine Feature” and press the <YES> key.

4-1-1 Programming pulldown group (adding/modifying/deleting group item)

Operation

4. Select “1.Pulldown Group” and press the <YES> key.5. Select an appropriate pulldown group and press the <YES>

key.6. If it is necessary to modify the message, press the <YES> key

first to enter the characters, and then press the <YES> key.

Field meaning1. Number of stay down (Min):

0=Status, 1~8=The number of times for stay down, 9=No limit2. Number of stay down (Max):

0=Status, 1~8=The number of times for stay down, 9=No limit

0.00

P3 C01 15-12-97 12:34 000000

PGM-3 1.Machine Feature 2.Clerk 3.Key Feature

0.00

Machine Feature

Machine Feature 1.Pulldown Group 2.Set Menu Table 3.Arrangement 4.Batch X/Z 5.General Feature 6.Scheduler 7.Check Print 8.Table Analysis v

0.00

Pulldown Group

List Title : LIST01 0001-026

Number of Stay down (Max) 0Number of Stay down (Min) 0

OK? YES

0.00

Machine Feature

Pulldown Group 1.LIST01 2.LIST02 3.LIST03 4.LIST04 5.LIST05 6.LIST06 7.LIST07 8.LIST08 v

Page 33: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

33QT-2000 Programming Manual

Addition/Modification

7. Select a record you want to add an item or modify the item andpress the <YES> key.

8. Select “1.PLU” or “2.Pull Down Group” you want toprogram.

9. To select an appropriate PLU as an item, select a PLUdirectly, enter PLU No. and press the <PLU> key or press theappropriate <Touch PLU> key.

10. Repeat step 7 to 9, until completing this pulldown group itemprogram.

11. Press the <ESC> key to terminate the program and proceedthe next step.

12. If you want to use the <LIST> key, press the <YES> key.After that, select a <LIST> key by pressing the appropriatekey. When the key you pressed is already used, choose YESto overwrite.

13. If you do not want to use <LIST> key, press the <NO> key.14. Press the <ESC> key to return to the previous menu.

0.00

LIST01 1.PLU0001 2.PLU0002 3. 4. 5. 6. 7. 8. 9. 10. 11. v

0.00

LIST01

Use LIST Key (if "NO" LIST#)

OK? YES

0.00

LIST01

PLU 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

0.00

LIST01

Item 1.PLU 2.Pull Down Group

0.00

LIST01

Pull Down Group 1.LIST01 2.LIST02 3.LIST03 4.LIST04 5.LIST05 6.LIST06 7.LIST07 8.LIST08 v

0.00

LIST01

This Key is Already Used. Overwrite OK? (YES/NO)

Page 34: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

34

Program 3

Deletion

7. Select the first record of items you want to delete and press the<NO> key.

8. Press the <YES> key.The selected item and followings are deleted.

9. Press the <ESC> key to return to the previous menu.

4-1-2 Programming set menu table

Operation

4. Select “2.Set Menu Table” and press the <YES> key.

5. Select an appropriate set menu item and press the <YES>key.

0.00

LIST01 1.PLU0001 2.PLU0002 3. 4. 5. 6. 7. 8. 9. 10. 11. v

0.00

Machine Feature

Machine Feature 1.Pulldown Group 2.Set Menu Table 3.Arrangement 4.Batch X/Z 5.General Feature 6.Scheduler 7.Check Print 8.Table Analysis v

0.00

LIST01

Item 01-02 Delete OK? YES

0.00

Set Menu Table

Set Menu Table 1.Set Menu (0001) 2.Set Menu (0002) 3.Set Menu (0003) 4.Set Menu (0004) 5.Set Menu (0005) 6.Set Menu (0006) 7.Set Menu (0007) 8.Set Menu (0008) v

Page 35: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

35QT-2000 Programming Manual

Addition/Modification

6. Select an item record you want to add or modify andpress the <YES> key.

7. Select “1.PLU” or “2.Pull Down Group” you want toprogram.

8. To select an appropriate PLU as an item, select a PLUdirectly, enter PLU No. and press the <PLU> key or press theappropriate <Touch PLU> key.To select the pulldown group as the item, press the <LIST>key or enter the significant list number, then press the<LIST #> key.

9. Repeat step 6 to 8, until completing this set menu itemprogram.

10. Press the <ESC> key to terminate the program and proceedthe next step.

11. If you want to change the main PLU, press the <YES> key.

12. Select the main PLU and press the <YES> key.

0.00

Set Menu Table (0001) 1.PLU0001 2.PLU0002 3. 4. 5. 6. 7. 8. 9. 10. 11. v

0.00

Set Menu Table (0001)

Item 1.PLU 2.Pull Down Group

0.00

Set Menu Table (0001)

PLU 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

0.00

Set Menu Table (0001)

Pull Down Group 1.LIST01 2.LIST02 3.LIST03 4.LIST04 5.LIST05 6.LIST06 7.LIST07 8.LIST08 v

0.00

Set Menu Table (0001)

Link:PLU0001 0001-004

OK? YES

0.00

Set Menu Table (0001)

PLU 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

Page 36: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

36

Program 3

Deletion

6. Select the smallest record you want to delete the item(s) andpress the <NO> key.

7. Press the <YES> key.8. Press the <ESC> key to return to the previous menu.

4-1-3 Programming arrangement

Operation

4. Select “3.Arrangement” and press the <YES> key.

5. Select an appropriate record and press the <YES> key.

0.00

Set Menu Table (0001) 1.PLU0001 2.PLU0002 3. 4. 5. 6. 7. 8. 9. 10. 11. v

0.00

Set Menu Table (0001)

Item 01-02 Delete OK? Yes

0.00

Machine Feature

Machine Feature 1.Pulldown Group 2.Set Menu Table 3.Arrangement 4.Batch X/Z 5.General Feature 6.Scheduler 7.Check Print 8.Table Analysis v

0.00

Arrangement

Arrangement 1.ARG GP1 2.ARG GP2 3.ARG GP3 4.ARG GP4 5.ARG GP5

Page 37: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

37QT-2000 Programming Manual

6. Press the <YES> key, enter arrangement commands bycharacter and press the <YES> key.

7. Press the <ESC> key to return to the previous menu.

4-1-4 Programming batch X/Z report

Operation

4. Select “4.Batch X/Z” and press the <YES> key.

5. Select an appropriate record, enter the report code (refer tothe next page) and press the <YES> key.

6. Press the <ESC> key to return to the previous menu.

0.00

Machine Feature

Machine Feature 1.Pulldown Group 2.Set Menu Table 3.Arrangement 4.Batch X/Z 5.General Feature 6.Scheduler 7.Check Print 8.Table Analysis v

0.00

Batch X/Z 0001-029 0011121517000000000002-029 1011121517000000000003-029 0111121517000000000004-029 111112151700000000

0.00

ARG GP10001-0380002-0380003-0380004-0380005-0380006-0380007-0380008-0380009-0380010-0380011-038 v

Page 38: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

38

Program 3

noitpircseD eciohC margorPedoc

.troperdaereussiotwollA a 0=seY1=oN

:)c+b+a(

D81

.tropertesereussiotwollA b 0=seY2=oN

)ecnaussitcerid(noitcelesteseR/daeR c 0=daeR4=teseR

:aeradetropeR,1=aera1cidoireP,0=aerayliaD

3=aeranoitadilosnoC,2=aera2cidoireP

tnacifingiSrebmun

:D

71

1edoctropeRtnacifingiS

srebmun::

D61

D51

2edoctropeRtnacifingiS

srebmun::

D41

D31

3edoctropeRtnacifingiS

srebmun::

D21

D11

4edoctropeRtnacifingiS

srebmun::

D01

D9

5edoctropeRtnacifingiS

srebmun::

D8

D7

6edoctropeRtnacifingiS

srebmun::

D6

D5

7edoctropeRtnacifingiS

srebmun::

D4

D3

8edoctropeRtnacifingiS

srebmun::

D2

D1

tropeR edoctropeR

troperrezilatotdexiF 11

troperyeknoitcnuF 21

tropertnemtrapedbuS 31

troperULP 41

troperkcotsULP 46

tropertnemtrapeD 51

troperpuorG 61

troperkrelc/reihsaC 71

troperselasylruoH 91

troperselasylhtnoM 02

tropernosaerdioV 22

tropersisylanaelbaT 82

troperyromemlanruoJ 85

Page 39: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

39QT-2000 Programming Manual

4-1-5 Programming the general feature

Operation

4. Select “5.General Feature” and press the <YES> key.

4-1-5-1 Programming the machine control 1

5. Select “1.Machine Control1” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. Machine number: (0-9999)

Not the ID code but the printing machine number.2. Add mode:

You can choose Add 2 (ex. dollar and cent), Add 0 (ex. Japanese yen) or Add 1.3. Reset the consecutive No. to initial value after taking daily fixed totalizer report:

Consecutive No. starts preset value +1. (Initial consecutive number: 1-999999.)4. Country Rounding:

You can choose None, IF1, IF2, Danish, Norwegian/Swedish, Singapore.5. Tax systems:

You can choose VAT/US/Canada/Singapore tax system.6. VLD compulsory and drawer open:

You can choose “At once” and “After compulsory.”7. Sentinel amount:

You can enter “Maximum value of left-most digit” and “ The number of zeros.”

0.00

Machine Feature

Machine Feature 1.Pulldown Group 2.Set Menu Table 3.Arrangement 4.Batch X/Z 5.General Feature 6.Scheduler 7.Check Print 8.Table Analysis v

0.00

General Feature

General Feature 1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.Print Control 6.Report Control1 7.Report Control2 8.Communication v

0.00

Machine Control1Machine No. 0Order of Date DD/MM/YYAdd Mode Add2Reset consecutive number toinitial value after takingdaily fixed totallizer report NoInitial value for consecutivenumber 0Country Rounding NoneTax System VAT(1-5)Disable to amount tender in RF v

0.00

Machine Control1Country Rounding None^Tax System VAT(1-5)Disable to amount tender in RF/REG- mode YESVLD compulsory & Drawer Open At OnceMoney-in-drawer limit alarmMaximum value of left mostdigit (0 to 9) 0Money-in-drawer limit alarmNumber of Zeros (0 to 9) 0

Page 40: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

40

Program 3

4-1-5-2 Programming the machine control 2

Operation

5. Select “2.Machine Control2” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. Sequencial/Random PLU number:

You can choose “Use memory number” or “Use Random code.”2. Net total includes tax:

Net total includes add-on tax amount.If select “No”, add-in tax amount is also excluded.

3. Net total includes commission:Net total includes clerk commission.

4. Plus/Minus follows tax status of item:The tax status and commission status of Plus/Minus after item registration follows thelast item.

5. Plus, Minus, Premium, Discount amount in item net totalizer:Affect Premium, Discount, Plus, Minus result to the original item.

6. Limit of number Plus, Minus, Premium, Discount key operations per transaction:Only one Premium, Discount, Plus or Minus registration is permitted during onereceipt.

0.00

Machine Control2Display Operator Guidance YESSequencial / Ramdom PLU number Use memory numberNet total Includes Tax IncludeNet total Includes Commission Include+,- Follows Tax Status of item YES+,-,%+&%- amount in item nettotalizer NOLimit of number +,-,%+&%- keyoperations per transaction NORound of %+ or %- operation v

0.00

Machine Control2result NO^Restriction(0 or 5)on the lastdigit for amount entry NOMoney Declaration Compulsory NOST Compulsory NOAllow Finalization operationwhen subtotal is zero or less YESAllow more than one tran-saction in RF mode N RepeatIssue post receiptwhen normal receipt is issued NOv

0.00

Machine Control2Allow numeric entry when comp- ^ulsory drawer is open YESError when actual stock lessthan zero NOAlarm when actual stock lessthan minimum stock level NOPerform stock QTY calculationduring RF mode or RF key NODelete RF items from guestreceipt when itemconsolidation is on YESv

0.00

Machine Control2receipt when item ^consolidation is on YES during RF mode or RF key NODelete RF items from guestreceipt when itemconsolidation is on YESKey Confirmation Tone On YESAllow Slit Drawer connection NOAdd No. of operation of clearkey into Fixed TTL NOUse YES key to select item YES

0.00

General Feature

General Feature 1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.Print Control 6.Report Control1 7.Report Control2 8.Communication v

Page 41: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

41QT-2000 Programming Manual

7. Rounds Premium or Discount operation:Rounding on the least significant digit of Premium or Discount registration.

8. Restrict (0 or 5) on the last digit for amount entry:The least significant digit for monetary amount entries is restricted to 0 or 5.

9. Money declaration compulsory:Money declaration before daily read/reset operation is mandatory or not.

10.ST compulsory:ST key operation before finalization is mandatory or not.

11.Allow finalization operation when subtotal is zero or less:Allow/prohibit finalization operation when the subtotal amount is zero or less.

12.Allow more than one transaction in RF mode:Prohibit/allow multiple refund operations after entering the RF mode.

13.Issue Post receipt when normal receipt is issued:Allow/prohibit post receipt after a normal receipt issuance.

14.Allow numeric entries when compulsory drawer is open:Allow/prohibit numeric entries when drawer (compulsory drawer only) is opened.

15.Error when actual stock less than zero:Error occurs when actual stock for a registered item becomes negative.

16.Error when actual stock less than minimum stock level:Error occurs when actual stock for a registered item drops below its programmedoptimum stock value.

17.Perform stock QTY calculation during RF mode or RF key:Affect to stock value during RF key and the RF mode operation.

18.Delete RF items from guest receipt when its consolidation is on:Merge the same department/PLU registration of a guest receipt.

19.Use YES key to select item:Pressing the <YES> key is required when you select an item. If “No” is selected,<YES> key does not need to be pressed.

Page 42: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

42

Program 3

4-1-5-3 Programming the machine control 3

Operation

5. Select “3.Machine Control3” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. Cash Declaration Compulsory:2. Charge Declaration Compulsory:3. Check Declaration Compulsory:4. Credit Declaration Compulsory:

These compulsories are effective only in the flash and the daily read/reset report.5. Receipt: Item Consolidation:

Merge the same department/PLU registration on receipt.6. Receipt: Sort by group:

Classify the registered items per group on receipt.7. Receipt: Sort by department:

Classify the registered items per department on receipt.8. Receipt: Sort by group/dept with detail:

You can choose “Total only” or “With detail.”

0.00

Machine Control3Cash Declaration Compulsory NOCharge Declaration Compulsory NOCheck Declaration Compulsory NOCredit Declaration Compulsory NOReceipt:Item consolidation NOReceipt:Sort by group NOReceipt:Sort by department NOReceipt:Sort by group/deptwith detail Total onlyCommission total includes VAT NORounding for commission calc- v

0.00

Machine Control3lation Round off^Move two decimal place toright for unit prices NOPrint consecutive No.on the receipt PrintPrint date on the receipt PrintPrint date on the journal PrintPrint time on the receipt PrintPrint time on the journal PrintVertical double size characterfor UP-350 NOv

0.00

Machine Control3Move two decimal place to ^right for unit prices NOPrint consecutive No.on the receipt PrintPrint date on the receipt PrintPrint date on the journal PrintPrint time on the receipt PrintPrint time on the journal PrintVertical double size characterfor UP-350 NOReceipt auto cut YES

0.00

General Feature

General Feature 1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.Print Control 6.Report Control1 7.Report Control2 8.Communication v

(future)

Page 43: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

43QT-2000 Programming Manual

4-1-5-4 Programming the machine control 4

Operation

5. Select “4.Machine Control4” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

0.00

Machine Control4Drawer open alarm Min. 00-59 0Drawer open alarm Sec. 00-59 0

0.00

General Feature

General Feature 1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.Print Control 6.Report Control1 7.Report Control2 8.Communication v

Page 44: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

44

Program 3

4-1-5-5 Programming the print control

Operation

5. Select “5.Print Control” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

0.00

Print ControlSet Menu Detail on Guest/Slip No PrintPrint PLU Number No PrintPrint Finalized Total PrintPrint Taxable Amount1 PrintPrint Taxable Amount2 PrintPrint Taxable Amount3 PrintPrint Taxable Amount4 PrintPrint Taxable Amount5 PrintPrint Taxable Status No PrintPrinting of total number ofitems sold on the receipt No Printv

0.00

Print ControlPrint Taxable Amount4 Print^Print Taxable Amount5 Print Print Taxable Status PrintPrinting of total number ofitems sold on the receipt No PrintPrint number of covers inheader No PrintPrint unit price on receipt No Print One line feeded afterfinalization for receipt NOTime format 24/12Hour 24 Hour

0.00

General Feature

General Feature 1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.Print Control 6.Report Control1 7.Report Control2 8.Communication v

Page 45: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

45QT-2000 Programming Manual

4-1-5-6 Programming the report control 1

Operation

5. Select “6.Report Control1” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaningThese items are included in the fixed totalizer report.

0.00

Report Control1Gross PrintNet PrintCash In Drawer PrintCash Declaration short/over No PrintCharge In Drawer No PrintCharge Declaration short/over No PrintCheque In Drawer PrintCheque Declaration short/over No PrintCredit In Drawer PrintCredit Declaration short/over No PrintRF Mode total Printv

0.00

Report Control1Number of covers No Print^The average spend per cover No PrintCommission for Cashing A Check No PrintTotal Service charge No PrintCommission 1 No PrintCommission 2 No PrintForeign currency cash andCheque in drawer totals No PrintAccumulate total of - key and%- key operation totals No PrintAccumulate total of RF key and v

0.00

Report Control1TAX2 Print^TAXEX2 No PrintTA3 PrintTAX3 PrintTAXEX3 No PrintTA4 No PrintTAX4 No PrintTAXEX4 No PrintTA5 No PrintTAX5 No PrintTAXEX5 No Print

0.00

General Feature

General Feature 1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.Print Control 6.Report Control1 7.Report Control2 8.Communication v

0.00

Report Control1VOID key operation totals No Print Number of C key operations No PrintRounding total No PrintTA1 PrintTAX1 PrintTAXEX1 No PrintTA2 PrintTAX2 PrintTAXEX2 No PrintTA3 PrintTAX3 Printv

Page 46: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

46

Program 3

4-1-5-7 Programming the report control 2

Operation

5. Select “7.Report Control2” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. Zero-Skip on Report:

Skip zero total item.2. Print Monthly Sales Average:

Print monthly sales average on monthly sales report.3. PLU random code order:

You can choose “Mem Number (by memory number)” or “Random code.”4. VAT recaluculate on X/Z report:

Calculate VAT amount at report issuance temporarily.5. Display Report:

Show report on the LCD screen. (Note that the read report cannot be printed)

0.00

Report Control2Dept/Sub Dept Zero-Skip YESCashier/Clerk Zero-Skip YESFunction Zero-Skip YESPLU/Stock Zero-Skip YESHourly Sales Zero-Skip YESGroup Zero-Skip YESMonthly Sales Zero-Skip YESTable Analysis Zero-Skip YESHourly Production Zero-Skip YESHourly Labor Zero-Skip YESPrinting of average spend per v

0.00

Report Control2item on monthly report Print^PLU Random Code Order Mem NumberPLU No. on X/Z Report No PrintSales Ratio on X/Z Report No PrintZ Counter PrintITEM Discount Totalizer No PrintDouble Z Report NOVAT Recalculation on X/Z Report NOStock Clear at Batch Z NOGT1(Daily) PrintGT2(Daily) Printv

0.00

Report Control2GT3(Daily) Print^GT1(Periodic1&2) No PrintGT2(Periodic1&2) No PrintGT3(Periodic1&2) No PrintDisplay Flash X NODisplay Employee Actvty X NODisplay Fixed Totalizer X NODisplay Dept/Sub Dept X NODisplay Cashier/Clerk X NODisplay Function X NODisplay PLU/Stock X NOv

0.00

Report Control2Display Hourly/Monthly X NO^Display Group X NODisplay Open Check X NODisplay Table Analysis X NODisplay Journal Memory X NODisplay Hourly Product X NODisplay Employee X NODisplay Hourly Labor X NODisplay Fixed Totalizer Z NODisplay Dept/Sub Dept Z NODisplay Cashier/Clerk Z NOv

0.00

General Feature

General Feature 1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.Print Control 6.Report Control1 7.Report Control2 8.Communication v

0.00

Report Control2Display Cashier/Clerk Z NO^Display Function Z NODisplay PLU/Stock Z NODisplay Hourly/Monthly Z NODisplay Group Z NODisplay Open Check Z NODisplay Table Analysis Z NODisplay Journal Memory Z NODisplay Hourly Product Z NODisplay Employee Z NODisplay Hourly Labor Z NOv

Page 47: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

47QT-2000 Programming Manual

4-1-5-8 Programming the communication

Operation

5. Select “8.Communication” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. Copy program change to other teminals:

Broadcast the programmed data in PGM 1 ~ 4 mode after completion of a program.2. Origin of reset data to be sent to the master:

You can choose “Own data file” or “Consolidation file.”3. Stock result copy:

Copy stock quantity to master after Z consolidation.

0.00

CommunicationCopy program change to otherterminals NORetry INLINE XZ Polling YESAllow to operate communicationfunction YESOrigin of reset data to besent to the master Own data fileReset&Printing of consolida-tion file before reset report PrintMaster printing of consolida-tion reset report Printv

0.00

Communicationsent to the master Own data file^Reset&Printing of consolida-tion file before reset report PrintMaster printing of consolida-tion reset report PrintReset consolidation totalafter inline consolidation YESStock Result Copy NOAccumulation of data in consoli-dation area following RESEToperation YES

0.00

General Feature

General Feature 1.Machine Control1 2.Machine Control2 3.Machine Control3 4.Machine Control4 5.Print Control 6.Report Control1 7.Report Control2 8.Communication v

Page 48: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

48

Program 3

4-1-5-9 Programming the hourly sales

Operation

5. Select “9.Hourly Sales” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. Hour (00~23)2. Minute (00~59)

4-1-5-10 Programming the SLIP/Guest

Operation

5. Select “10.SLIP/Guest” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

0.00

SLIP / GuestPrint additional items only Entire memorySlip Auto Line Find NOSlip Maximum Lines 0Maximum number of automaticline feed 0Item consolidation on slip/Guest receipt NOPrinting only Group TTL on slip/Guest receipt NOPrint only Dept TTL on Slip/ v

0.00

SLIP / GuestPrint only Dept TTL on slip/ ^Guest receipt NOPrint detail in order of Dept/Group on slip/Guest receipt Total onlyConsecutive No. on slip/Guestreceipt PrintPrint Date on slip/Guest RCT PrintPrint Time on slip/Guest RCT PrintBack feed after slip Print NOBack feed after VLD Print NOBack feed after CHK-END/PRT NO

0.00

Hourly SalesInterval(Hours) 1Interval(Minutes) 0Start Time(Hour) 0Start Time(Minute) 0

0.00

General Feature

General Feature 9.Hourly Sales ^ 10.SLIP / Guest 11.Journal Control 12.Message Control 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt v

0.00

General Feature

General Feature 9.Hourly Sales ^ 10.SLIP / Guest 11.Journal Control 12.Message Control 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt v

Page 49: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

49QT-2000 Programming Manual

Field meaning1. Alert REG Buffer Near End:

Alert registration buffer near end.2. Print additional items only:

Slip printing begins with “At the top of the transaction (Entire memory)/At the top ofthis receipt (Additional only).”

3. Slip Auto Line (00~99)4. Slip Maximum Line (00~99)

4-1-5-11 Programming the journal control

Operation

5. Select “11.Journal Control” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. Storage of TRG operation into journal memory:

Put training clerk registration data into journal memory.2. Generate J-memo full error:

Alert when the journal memory becomes full/Not alert even if the journal memorybecomes full..

0.00

J-memoStorage of TRG Operation intojournal memory YESGenerate J-memo full error NO

0.00

General Feature

General Feature 9.Hourly Sales ^ 10.SLIP / Guest 11.Journal Control 12.Message Control 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt v

Page 50: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

50

Program 3

4-1-5-12 Programming the message control

Operation

5. Select “12.Message Control” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning

1. Receipt Logo either graphic or text:Select Text Logo/Graphic Logo.

4-1-5-13 Programming the order control

Operation

5. Select “13.Order Control” and press the <YES> key.

0.00

Message ControlReceipt Logo Message Print Receipt Commercial Message No PrintReceipt Bottom Message No PrintSlip Commercial Message No PrintSlip Bottom Message No PrintSlip Intermediate Message No PrintBill Top Message No PrintBill Copy Message No PrintBill Bottom Message No PrintReceipt Logo either Graphic orText Text

0.00

General Feature

General Feature 9.Hourly Sales ^ 10.SLIP / Guest 11.Journal Control 12.Message Control 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt v

0.00

General Feature

General Feature 9.Hourly Sales ^ 10.SLIP / Guest 11.Journal Control 12.Message Control 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt v

0.00

Order ControlPrint location character No PrintPrint Item Price No PrintStop printing message ondouble BON No PrintPrint Detail of Set Menu No PrintAuto Cut for receipt/KP-300 NOPrint dashed line NOPrint items on KP trainingoperator NOPerform item consolidation onKP NOv

0.00

Order ControlPrint dashed line ^Print items on KP trainingoperator NOPerform item consolidation onKP NOprint dashed line or auto cut 0Number of line feed afterprint dashed line or auto cut 4Set the buzzer of kitchen PRT NOError generate Printer goesdown YES

Page 51: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

51QT-2000 Programming Manual

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

4-1-5-14 Programming the set menu/condiment

Operation

5. Select “14.Set Menu/Condiment” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. Calculate Price for detail:

Calculate/Not calculate detail item prices in set menu.2. Follow the same QTY as main item:

Fine Dining: Not allow to fix the number of the condiment, and follow thequantities of main PLU.

Fast food: Allow to fix the number of the condiment, and not follow the quantitiesof main PLU.

3. No. of detail for Post Entry:The value of reserved record for Post Entry function in detail file.

0.00

Set Menu/CondimentCalculate Price for detail YESFollow the same QTY as mainitem Fine DiningNo. of Detail for Post Entry 0

0.00

General Feature

General Feature 9.Hourly Sales ^ 10.SLIP / Guest 11.Journal Control 12.Message Control 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt v

Page 52: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

52

Program 3

4-1-5-15 Programming the check tracking

Operation

5. Select “15.CHK Tracking” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning

1. Clearing CHK/TBL No. by using the same number again:You can choose “Check #” or “Table #.”

4-1-5-16 Programming the clerk interrupt

Operation

5. Select “16.Clerk Interrupt” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

0.00

CHK trackingClearing CHK/TBL No. by using the same number again CHK NumberCHK# 12 Digits(if No,6Digits) NO Auto New Balance by removingclerk key NOTax Claculation print by afterNB key NOPrint previous balance whenCHK is opened by OLD CHK key PrintPerform item consolidationwhen CHK is opened by OLD CHK NO

0.00

General Feature

General Feature 9.Hourly Sales ^ 10.SLIP / Guest 11.Journal Control 12.Message Control 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt v

0.00

Clerk InterruptAllow Clerk Interrupt NOAllow operation to clerks whoare not allocated clerkinterrupt detailed memory NOAuto Sign Off Timer for clerkinterrupt (In seconds) 0

0.00

General Feature

General Feature 9.Hourly Sales ^ 10.SLIP / Guest 11.Journal Control 12.Message Control 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt v

Page 53: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

53QT-2000 Programming Manual

Field meaning1. Clerk sign off timer: 0-99. (Sec.)

4-1-5-17 Programming the display control

Operation

5. Select “17.Display Control” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. 2nd LCD Control:

You can choose, Non; No 2nd display, Clerk; signed on clerk exclusive,Transaction; registered receipt alternative,Customer; customer display, Journal; journal display, Pull down menu

2. Backlight Off Timer: 0-59. (Minute)

0.00

Display Control2nd LCD Control NonBacklight Off Timer(Min) 1

0.00

General Feature

General Feature 12.Message Control ^ 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt 17.Display Control 18.Menu Shift 1 19.Menu Shift 2

Page 54: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

54

Program 3

4-1-5-18 Programming the menu shift 1

Operation

5. Select “18.Menu Shift 1” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning1. Accumulate touch PLU menus:

Enable/Disable to sum up PLUs to one Menu sheet.2. Follow memu total reset operation to the destination:

Reset child menu sheets with parent menu sheet together/Reset menu sheet indipendently.3. Destination of accumulation for menu totalizing:

Define the sheet No. of parent menu sheet. (1~8)

0.00

Menu Shift1PLU Quantity Extension NODEPT Quantity Extension YESSUB DEPT Quantity Extension YESAccumulate touch PLU menus NOFollow menu total reset opera-tion to the destination NODestination(1) of accumulationfor menu totalizing 0Accumulate 1st menu to (1) NOAccumulate 2nd menu to (1) NOAccumulate 3rd menu to (1) NO

0.00

Menu Shift1Accumulate 4th menu to (1) NO^Accumulate 5th menu to (1) NOAccumulate 6th menu to (1) NOAccumulate 7th menu to (1) NOAccumulate 8th menu to (1) NODestination(2) of accumulationfor menu totalizing 0Accumulate 1st menu to (2) NOAccumulate 2nd menu to (2) NOAccumulate 3rd menu to (2) NOAccumulate 4th menu to (2) NOv

0.00

Menu Shift1Accumulate 8th menu to (1) NO^Destination(2) of accumulationfor menu totalizing 0Accumulate 1st menu to (2) NOAccumulate 2nd menu to (2) NOAccumulate 3rd menu to (2) NOAccumulate 4th menu to (2) NOAccumulate 5th menu to (2) NOAccumulate 6th menu to (2) NOAccumulate 7th menu to (2) NOAccumulate 8th menu to (2) NO

0.00

General Feature

General Feature 12.Message Control ^ 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt 17.Display Control 18.Menu Shift 1 19.Menu Shift 2

Page 55: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

55QT-2000 Programming Manual

4-1-5-19 Programming the menu shift 2

Operation

5. Select “19.Menu Shift 2” and press the <YES> key.

6. Select the field you want to change and press the <YES>/<NO> key or enter the numeric value and press the <YES>key.

7. After programming, you should press the <ESC> key toreturn to the previous menu.

Field meaning

Define start PLU No. of each menu sheet.

0.00

Menu Shift2Start PLU Number of 1st menu 1Start PLU Number of 2nd menu 109Start PLU Number of 3rd menu 217Start PLU Number of 4th menu 325Start PLU Number of 5th menu 433Start PLU Number of 6th menu 541Start PLU Number of 7th menu 649Start PLU Number of 8th menu 757

0.00

General Feature

General Feature 12.Message Control ^ 13.Order Control 14.Set Menu/Condiment 15.CHK Tracking 16.Clerk Interrupt 17.Display Control 18.Menu Shift 1 19.Menu Shift 2

Page 56: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

56

Program 3

4-1-6 Programming scheduler

Operation

4. Select “6. Scheduler” and press the <YES> key.

5. Select an appropriate record and press the <YES> key.6. Enter schedule (refer to the next page) and press the <YES>

key.7. Press the <ESC> key to return to the previous menu.

0.00

Machine Feature

Machine Feature 1.Pulldown Group 2.Set Menu Table 3.Arrangement 4.Batch X/Z 5.General Feature 6.Scheduler 7.Check Print 8.Table Analysis v

0.00

Scheduler D28 - D13 D12 - D10001-062 0000000000000000 0000000000000002-062 0000000000000000 0000000000000003-062 0000000000000000 0000000000000004-062 0000000000000000 000000000000

Page 57: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

57QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)95:32~00:00(emittratsreludehcStnacifingiS

srebmun::::

D82D

72D

62D

52

)95:32~00:00(emitdnereludehcStnacifingiS

srebmun::::

D42

D32D

22D

12

"0"syawlA ;D

02

:1lortnoclavretnI2=ylhtnoM,1=ylkeeW,0=yliaD

tnacifingiSrebmun

:D

91

:2lortnoclavretnIgninaemoN;yliaD

keewafoyadenifeD;ylkeeW,yadseuT;20,yadnoM;10,yadnuS;00

,yadirF;50,yadsruhT;40,yadsendeW;30yadrutaS;60

13~10,etadenifeD;ylhtnoMhtnomehtfodneehtsnaem99

tnacifingiSsrebmun

::D

81D

71

)95:32~00:00(emitlavretnItnacifingiS

srebmun::::

D61

D51D

41D

31

"0"syawlA ;D

21

.oNelbattnemegnarrAtnacifingiS

srebmun::::

D11

D01

D9

D8

.oNeliftnemegnarrAtnacifingiS

srebmun:::

D7

D6

D5

"0"syawlA ;;;;D

4D

3D

2D

1

Page 58: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

58

Program 3

4-1-7 Programming check print

Operation

4. Select “7.Check Print” and press the <YES> key.

5. Select an appropriate record and press the <YES> key.6. Enter value (below) and press the <YES> key.7. Press the <ESC> key to return to the previous menu.

0.00

Machine Feature

Machine Feature 1.Pulldown Group 2.Set Menu Table 3.Arrangement 4.Batch X/Z 5.General Feature 6.Scheduler 7.Check Print 8.Table Analysis v

0.00

Check Print0001-041 0000000002-041 0000000003-041 0000000004-041 0000000005-041 0000000006-041 0000000007-041 0000000008-041 0000000009-041 000000

noitpircseD eciohC margorPedoc

:atadgnitnirpenifeD)eziselbuod(tnuomagnitnirP;2tnuomagnitnirP;1

)eziselbuod(etadgnitnirP;4etadgnitnirP;3enilts1egassemtnemesrodnekcehC;5enildn2egassemtnemesrodnekcehC;6enildr3egassemtnemesrodnekcehC;7enilht4egassemtnemesrodnekcehC;8

tnacifingiSrebmun

:D

5

.gnitnirperofebdeeF a 0=oN1=seY

:)c+b+a(

D4

noitceriddeeF b 0=lamroN2=esreveR

.gnitnirpretfaenil1deeF c 0=oN4=seY

)9~0(gnitnirperofebsenildeeffo.oNtnacifingiS

rebmun:D

3

)94~00(stigidtesffognitnirPtnacifingiS

srebmun::

D2

D1

Page 59: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

59QT-2000 Programming Manual

4-1-8 Programming table analysis

Operation

4. Select “8.Table Analysis” and press the <YES> key.

5. Select an appropriate record and press the <YES> key.6. Enter characters for table analysis and press the <YES> key.7. Select an appropriate record and press the <YES> key.8. Enter value (below) and press the <YES> key.9. Press the <ESC> key to return to the previous menu.

Note:This programming is only effective, if the check-# is 6-digit long

0.00

Machine Feature

Machine Feature 1.Pulldown Group 2.Set Menu Table 3.Arrangement 4.Batch X/Z 5.General Feature 6.Scheduler 7.Check Print 8.Table Analysis v

0.00

Table AnalysisTBL01 000000000000 TBL02 000000000000TBL03 000000000000TBL04 000000000000TBL05 000000000000TBL06 000000000000TBL07 000000000000TBL08 000000000000TBL09 000000000000TBL10 000000000000

noitpircseD eciohC margorPedoc

puorgehtfo.oNkcehcmuminiM)".1"snaem"0"(

tnacifingiSsrebmun

::::::D

21D

11D

01D

9D

8D

7

puorgehtfo.oNkcehcmumixaMsnaem"000000"( .gnimmargorpon )

tnacifingiSsrebmun

::::::D

6D

5D

4D

3D

2D

1

Page 60: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

60

Program 3

4-1-9 Programming tax table

Operation

4. Select “9.Tax Table” and press the <YES> key.

5. Select an appropriate table and press the <YES> key.

6. Select an appropriate record and press the <YES> key.7. Enter value (below) and press the <YES> key.8. Press the <ESC> key to return to the previous menu.

Field meaning1. Tax Rate(%):

Tax rate; 0.0001 ~ 9999.9999 % (Use Decimal point key)2. Maximum Table Amount:

Maximum value; 0.00 ~ 9999.993. Rounding:

Selection; Cut off/Round off/Round up4. Singapore Rounding:

Selection; Yes/No5. Calculation type:

Selection; Not calculate/Table/Table & Add on/Add in (VAT)/Tax on Tax6. Sum of Cyclic Patterns, No. of Cyclic Values, Sum of Cyclic Values, Actual Values

See the next page.

0.00

Machine Feature

Machine Feature 6.Scheduler ^ 7.Check Print 8.Table Analysis 9.Tax Table 10.Void Table 11.System Connection 12.I/O Parameter 13.Printer Connection

0.00

Machine Feature

Tax Table 1.Tax Table (1) 2.Tax Table (2) 3.Tax Table (3) 4.Tax Table (4) 5.Tax Table (5)

0.00

Tax Table (1)Tax Rate(%) 8.125 Maximum Table Amount 0.00Rounding Round OffSingaprore Rounding Yes Calculation type Add inSum of Cyclic Patterns 0000No. of Cyclic Values 0000Sum of Non-Cyclic Values 0000Actual Values(01) 00Actual Values(02) 00Actual Values(03) 00 v

Page 61: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

61QT-2000 Programming Manual

Explanation of U.S. tax table examples

Tax table without a tax rate

• Sum of a single cyclic pattern: 14 + 14 + 14 + 15 + 14 + 14 + 15 = 100• Number of values in each cyclic pattern: 7• Sum of values in non-cyclic pattern: 7• Sum of values in the non-cyclic pattern: 7• Non-cyclic values and one set of cyclic values (actual values): 7, 14, 14, 14, 15, 14, 14, 15• Maximum taxable amount in table calculation: $20.07• Tax system: Tax table with rate• Tax rate: 7.000%• Rounding method: Cut off to two decimal places

• Sum of a single cyclic pattern: 17 + 17 + 16 = 50• Number of values in each cyclic pattern: 3• Sum of values in the non-cyclic pattern: 10 + 14 = 24• Non-cyclic values and one set of cyclic values (actual values): 10, 14, 17, 17, 16• Tax system: Tax table without rate

Tax table with a tax rate

Price RangeTax(6%) Min. break point Max. break point

$.00.01.02.03.04.05.06.07

$ .01.11.25.42.59.75.82

1.09

102441587491

108124141

0102441587491

108124

–––––––––

=========

101417171617171617

$ .10.24.41.58.74.81

1.081.24

Max. break pointsUpper Lower

Differ-ence Pattern

Non-cyclic data

Cyclic data

Cyclic data

Price RangeTax(6%) Min. break point Max. break point

$.00.01.02.03.04.05.06.07.08.09.10.11.12.13.14

1.40

$ .01.08.22.36.50.65.79.93

1.081.221.361.501.651.791.93

19.93

7213549647892

107121135149164178192207

07

213549647892

107121135149164178192

–––––––––––––––

===============

71414141514141514141415141415

$ .07.21.35.49.64.78.92

1.071.211.351.491.641.781.922.07

20.07

Max. break pointsUpper Lower

Differ-ence Pattern

Non-cyclic data

Cyclic data

Cyclic data

On all sales above $20.07, compute the tax at a rate of 7%

Page 62: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

62

Program 3

4-1-10 Programming void table

Operation

4. Select “10.Void Table” and press the <YES> key.

5. Press the <YES> key.

6. Select an appropriate record and press the <YES> key.7. Enter void character and press the <YES> key.8. Enter value (below) and press the <YES> key.9. Press the <ESC> key to return to the previous menu.

0.00

Machine Feature

Machine Feature 6.Scheduler ^ 7.Check Print 8.Table Analysis 9.Tax Table 10.Void Table 11.System Connection 12.I/O Parameter 13.Printer Connection

0.00

Void Table

Use Void Table YES

0.00

Void Table 000000 000000 000000 000000 000000 000000

noitpircseD eciohC margorPedoc

.eulavkcotsnruteR0=seY1=oN

:D

1

Page 63: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

63QT-2000 Programming Manual

4-1-11 Programming system connection

Operation

4. Select “11.System Connection” and press the <YES> key.

5. Select the record with “*” and press the <YES> key.6. Enter the logical ID character and press the <YES> key.8. Press the <Right arrow> key, enter value (below; D24,D23 and

D10 ~ D1 ) and press the <YES> key.9. Press the <ESC> key to return to the previous menu.

10. This program should be made to all terminals in the cluster.

0.00

Machine Feature

Machine Feature 6.Scheduler ^ 7.Check Print 8.Table Analysis 9.Tax Table 10.Void Table 11.System Connection 12.I/O Parameter 13.Printer Connection

0.00

System Connection* 1 MC "01 02010100000 2 00000000000 3 00000000000 4 00000000000 5 00000000000 6 00000000000 7 00000000000 8 00000000000 9 00000000000 10 00000000000 11 00000000000v

noitpircseD eciohC margorPedoc

)sretcarahc21nihtiw(sretcarahcDIlacigoLtnacifingiS

sretcarahc: ~:D

42D

31

:lanimreT10=srehtO,20=flesenO

tnacifingiSsrebmun

::D

21D

11

:)eulavmargorp(retsampukcab/retsamgnikcartkcehC00=etilletaS,20=retsampukcaB,10=retsaM

tnacifingiSsrebmun

::D

01D

9

:)eulavtnerruc(retsampukcab/retsamgnikcartkcehC00=etilletaS,20=retsampukcaB,10=retsaM

tnacifingiSsrebmun

::D

8D

7

:)eulavmargorp(retsamtnirpPK00=etilletaS,20=retsampukcaB,10=retsaM

tnacifingiSsrebmun

::D

6D

5

:)eulavtnerruc(retsamtnirpPK00=etilletaS,10=retsaM

tnacifingiSsrebmun

::D

4D

3

"0"syawlA ;;D

2D

1

Page 64: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

64

Program 3

4-1-12 Programming I/O parameter

Operation

4. Select “12.I/O Parameter” and press the <YES> key.

5. Select an appropriate record, enter appropriate value (below)and press the <YES> key.

6. Enter value (below) and press the <YES> key.7. Press the <ESC> key to return to the previous menu.

First record

Second record

Note:If you select IR port at D3 in Second record, you can choose either 4800 bps or 9600 bpsat D2 in second record.

0.00

Machine Feature

Machine Feature 6.Scheduler ^ 7.Check Print 8.Table Analysis 9.Tax Table 10.Void Table 11.System Connection 12.I/O Parameter 13.Printer Connection

0.00

I/O Parameter 0001-902 00000000000002-902 00000000000003-902 00000000000004-902 00000000000005-902 00000000000006-902 00000000000007-902 00000000000008-902 00000000000009-902 00000000000010-902 0000000000

Note: Please perform the flag clear opera-tion of the terminal after changing theI/O parameter table.

noitpircseD eciohC margorPedoc

:etarduabenil-nI3=spbM52.1,2=spbk526,1=spbk213,0=spbk651

tnacifingiSrebmun

:D

1

noitpircseD eciohC margorPedoc

:noitcelestropenilnO,1=)mottob(2MOC,0=)edis(3MOC3=esuotwollatoN,2=)tnorf(tropRI

tnacifingiSrebmun

:D

3

:etarduabenilnO,2=spb0084,1=spb0069,0=spb00291

4=spb0021,3=spb0042

tnacifingiSrebmun

:D

2

:)reggirt(langisnoitavitcA2=langisoN,1=IC,0=RD

tnacifingiSrebmun

:D

1

Page 65: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

65QT-2000 Programming Manual

Third record

Fourth record

Fifth record

noitpircseD eciohC margorPedoc

5103-ASybgnitnirpnoitadilav/pilsfostigidtesffofo.oN)64~00(

tnacifingiSsrebmun

::D

01D

9

"0"syawlA ;;;D

8D

7D

6

:gnitnirppilsrofdesuretnirP0=noitcennocoN,2=5103-AS,1=0021-PS

tnacifingiSrebmun

:D

5

:retnirproftropC232-SRgnisU2=1MOC,1=)edis(3MOC,0=)mottob(2MOC

tnacifingiSrebmun

:D

4

:retnirproftropC232-SRehtfoetarduaB,2=spb0084,1=spb0069,0=spb00291

4=spb0021,3=spb0042

tnacifingiSrebmun

:D

3

:tropC232-SRotdetcennocretnirpgnisU)053-PUOISAC(00=88T-MT

)5103-ASOISAC(10=059U-MT)NOSPE(20=003U-MT

)NEZITIC(30=132-MBC)NEZITIC(40=1453-PDi

tnacifingiSsrebmun

::D

2D

1

noitpircseD eciohC margorPedoc

"0"syawlA ;;;D

01D

9D

8

"0"syawlA ;;;D

7D

6D

5

:retnirproftropC232-SRgnisU2=1MOC,1=)edis(3MOC,0=)mottob(2MOC

tnacifingiSrebmun

:D

4

:retnirproftropC232-SRehtfoetarduaB,2=spb0084,1=spb0069,0=spb00291

4=spb0021,3=spb0042

tnacifingiSrebmun

:D

3

:tropC232-SRotdetcennocretnirpgnisU)053-PUOISAC(00=88T-MT

)5103-ASOISAC(10=059U-MT)NOSPE(20=003U-MT

)NEZITIC(30=132-MBC)NEZITIC(40=1453-PDi

tnacifingiSsrebmun

::D

2D

1

noitpircseD eciohC margorPedoc

:detcetedsidneraenrepapretfA1=gnitnirppotS,0=gnitnirpeutitnoC

tnacifingiSrebmun

:D

1

Page 66: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

66

Program 3

noitpircseD eciohC margorPedoc

desutoN ;D

2

:rolocyalpsiD1=dnuorgetihw/enileulB,0=dnuorgeulb/eniletihW

tnacifingiSrebmun

:D

1

Sixth record

noitpircseD eciohC margorPedoc

:yalpsidraeR0=detcennoctoN,1=detcennoC

tnacifingiSrebmun

:D

2

:yalpsidetomeR0=detcennoctoN,1=detcennoC

tnacifingiSrebmun

:D

1

Seventh record

Page 67: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

67QT-2000 Programming Manual

4-1-13 Programming printer connection

Operation

4. Select “13. Printer Connection” and press the <YES> key.

5. Select an appropriate record of the main printer field andpress the <YES> key.

6. Select these options, “1.My Printer #1/2.My Printer #2/3.RS-232C Printer/4.Kitchen Printer” and press the <YES> key.

7. If you select “3.RS-232C Printer”, select the terminal ID /1 or/2.

• /1 stands for the specified printer which is programmedin the Forth record. (page 65)

• /2 stands for the specified printer which is programmedin the Fifth record. (page 65)If you want to select “4.Kitchen Printer”, select KP directly.

8. If you want to allocate backup printer, set the backup printerin the backup printer field.

9. Press the <ESC> key to return to the previous menu.

Note:The 10-th through 16-th record of this file are used for the printer definition of order IDchange of the Manager function.The 17-th through 24-th record are not used.

0.00

Machine Feature

Machine Feature 6.Scheduler ^ 7.Check Print 8.Table Analysis 9.Tax Table 10.Void Table 11.System Connection 12.I/O Parameter 13.Printer Connectionv

0.00

Backup printer definition field

Main printer definition field

Printer Connection 1 R/J MC #01 /1 MC #01 /2 2 Report MC #02 /2 MC #01 /1 3 Order1 KP1 KP2 4 Order2 KP1 MC #03 /1 5 Order3 6 Order4 7 Order5 8 Order6 9 Order710 No11 No

0.00

Printer Connection

Print 1.No 2.R/J 3.Report 4.Order1 5.Order2 6.Order3 7.Order4 8.Order5 13.Printer Connection

0.00

Printer Connection

R/J 1.My printer /1 2.My printer /2 3.RS-232C Printer 4.Kitchen Printer 13.Printer Connection

0.00

Printer Connection

RS-232C Printer 1.MC #01 /1 2.MC #01 /2 3.MC #02 /1 4.MC #02 /2 5.MC #03 /1 6.MC #03 /2 7. 8.

Page 68: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

68

Program 3

0.00

Machine Feature

Machine Feature 9.Tax Table ^ 10.Void Table 11.System Connection 12.I/O Parameter 13.Printer Connection 14.Time Zone 15.Time & Attendance 16.Hourly/Item Link v

4-1-14 Programming time zone

Operation

4. Select “14.Time Zone” and press the <YES> key.

5. Select an appropriate record, and enter the start time, endtime, and cycle time.

6. Press the <ESC> key to return to the previous menu.

Worksheet for time zone

0.00

Time Zone Start End Cycle 0001-800 09:00 10:00 00:150002-800 10:00 12:00 00:300003-800 15:00 17:00 01:000004-800 00:00 00:00 00:000005-800 00:00 00:00 00:000006-800 00:00 00:00 00:00 . . .

Start Time fieldREC#-FILE#

End Time field

Cycle Time field

noitpircseD eciohC margorPedoc

)ruoH(emiTtratSenoZ 32~00 ::D

21D

11

)95~00()etuniM(emiTtratSenoZ 95~00 ::D

01D

9

)32~00()ruoH(emiTdnEenoZ 32~00 ::D

8D

7

)95~00()etuniM(emiTdnEenoZ 95~00 ::D

6D

5

)32~00()ruoH(elcyCenoZ 32~00 ::D

4D

3

)54,03,51,00()etuniM(elcyCenoZ 54,03,51,00 ::D

2D

1

Page 69: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

69QT-2000 Programming Manual

4-1-15 Programming Time & Attendance

Preparation

4. Select “15.Time & Attendance” and press the <YES> key.

4-1-15-1 Programming Time & Attendance (General)

Operation

5. Select “1.General” and press the <YES> key.

6. Select an appropriate record and choose options.7. Press the <ESC> key to return to the previous menu.

Field Meanings:1. Time&Attendance control:

Weekly, Bi-weekly2. Rounding minute of work time:

Non, 10min., 15min., 20min., 30min.

0.00

Machine Feature

Machine Feature 9.Tax Table ^ 10.Void Table 11.System Connection 12.I/O Parameter 13.Printer Connection 14.Time Zone 15.Time & Attendance 16.Hourly/Item Link v

0.00

Time & Attendance

Time & Attendance 1.General 2.Job Code 3.Employee&Scedule

Time & AttendanceTime & Attendance control WeeklyWeekly work time 40:00Weekly work time for minor 25:00Work time includes break hours NORounding minute of work time NonAllow employee report Z withemployees clocked-in NOEnable clerk to sign on afterclock-in YES

0.00

Page 70: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

70

Program 3

noitpircseD eciohC margorPedoc

:eeyolpmedegalluF)ruoh(emitkrowylkeeW

99~00 ::D

21D

11

)etunim(emitkrowylkeeW 95~00 ::D

01D

9

:eeyolpmeroniM)ruoh(emitkrowylkeeW

99~00 ::D

8D

7

)etunim(emitkrowylkeeW 95~00 ::D

6D

5

.tuo-dekcolctoneraeeyolpmefineveZEEYOLPMEwollA a 0=oN1=seY :

D4ylkeeW-iB/ylkeeWesU b 0=ylkeeW

2=ylkeeW-iB

"0"syawlA :D

3

emitkroWsaemitkaerBezingoceR0=oN1=seY

:D

2

*sruohkrowfognidnuoR,2=setunim51reP,1=setunim01reP,0=dnuortoN

4=setunim03reP,3=setunim02reP

tnacifingiSrebmun

:D

1

* :sruohkrowfonoitcalfgnidnuoR).nim(01=90~50,00=40~00:.nim01reP).nim(51=41~80,00=70~00:.nim51reP

).nim(00=01~00:.nim02reP

Worksheet for time and attendance

Page 71: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

71QT-2000 Programming Manual

4-1-15-2 Programming Time & Attendance (Job Code)

Operation

5. Select “2.Job Code” and press the <YES> key.

6. Select an appropriate job code and press the <YES> key.

7. Select an appropriate record to enter the character or number,and then press the <YES> key.

Worksheet for Job code

0.00

Time & Attendance

Time & Attendance 1.General 2.Job Code 3.Employee&Scedule

0.00

Memory No 1 Descriptor CookPay Rate 9999.99Over Time Pay Ratio 99.99Tip Declaration Compulsory NO

0.00

Time & Attendance

Job Code 1.Cook 2.Cashier 3.Dish wash 4.Floor cleaning 5.JOB#05 6.JOB#06 7.JOB#07 8.JOB#08 v

noitpircseD eciohC margorPedoc

).gnittesonsnaemretcarahcoN()tigid-61anihtiw(retcarahCtnacifingiS

retcarahc:

D82~ D

31

noitarepotuo-kcolCgnirudyroslupmocnoitaralceDpiT0=oN1=seY

:D

21

"0"syawlA ;D

11

)99.9999$~00.0$(etaryaPtnacifingiS

rebmun:

D01

D~5

)99.99$~00.0$(oitaryaPemitrevO)"00.1$"snaem"00.0$"(

tnacifingiSrebmun

::::D

4D

3D

2D

1

Page 72: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

72

Program 3

0.00

Time & Attendance

Time & Attendance 1.General 2.Job Code 3.Employee&Scedule

4-1-15-3 Programming Time & Attendance (Employee & Schedule)

Operation

5. Select “3.Employee&Schedule” and press the <YES> key.

6. Select an appropriate employee file, and press the <YES>key.

7. Select an appropriate record to enter the character or chooseoptions.

8. Press the <ESC> key to assign Schedule mode.

Field Meanings:Employee No.: Put in the numeric number (0~999999). When you put “0” at the

beginning of the number, these numbers are not recognized.Descriptor: Put the specific character within 16-degits from the leftmost side.Social Security No.: Put in the numeric number (0~999999). When you put “0” at the

beginning of the number, these numbers are not recognized.Job Code (1)~(4): Choose an item from the pulldown menu.Cashier/Clerk Name:Choose an enployee from the character pulldow menu.

0.00

Time & Attendance

Job Code 1.Sean Harrison 2.Oliver Clapton 3.Richard Baker 4.Geia Peabody 5.Tyler Johnson 6.EMP#06 7.EMP#07 8.EMP#08 v

0.00

Memory No 1 Employee No. 123456Descriptor Sean HarriosonSocial Security No. 1234567890Job Code(1) CookJob Code(2) CasierJob Code(3) Dish washJob Code(4) --------Allow to Specify Job Codewhen Clocking-in NOAllow to Clock-in with Non-Preset Job Code NOv

0.00

Memory No 1 Job Code(2) Cashier ^Job Code(3) Dish washJob Code(4) --------Allow to Specify Job Codewhen Clocking-in NOAllow to Clock-in with Non-Preset Job Code NODisplay Job Code Windowwhen Clocking-in NOMinor Employee YESCashier/Clerk Name Harrison

Page 73: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

73QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)999999~000000:stigid-6anihtiw(.oNeeyolpmE)rebmuntcelesonsnaem"000000"(

432100)ge.derongisi”orez“gnidaeR → 4321

tnacifingiSrebmun

:::D

44D

34D

24

:::D

14D

04D

93

)stiged-61(retcarahCtnacifingiS

retcarahc:

D83

D~32

)stiged-01anihtiw(.oNytiruceSlaicoS7654321000)ge.derongitonsi”orez“gnidaeR → 7654321000

tnacifingiSrebmun

:D

22D~

31

edoCboJyficepS a 0=oN1=seY

:)c+b+a(

D21

edoCboJtuohtiwni-kcolC b 0=oN2=seY

noitareponi-kcolCgnirudwodniwedoCboJehtesU c 0=oN4=seY

eeyolpmeroniM0=oN1=seY

:D

11

)99~00(1edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

01D

9

)99~00(2edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

8D

7

)99~00(3edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

6D

5

)99~00(4edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

4D

3

)99~00(rebmundrocerkrelC/reihsaCtnacifingiS

rebmun::

D2

D1

0.00

Sean Harrison Monday Shift(1) Cook Start Time 08:00 End Time 10:00 Break Time 00:15 Grace Before Start 10 Grace After Start 00 Grace Before End 00 Grace After End 15Shift(2) Waiter Start Time 14:30 End Time 17:00 v

9. Select an appropriate day, and press the <YES> key.

10. Select an appropriate record to enter the character and time.

Worksheet for employee

0.00

Time & Attendance

Schedule 1.Monday 2.Tuesday 3.Wednesday 4.Thursday 5.Friday 6.Saturday 7.Sunday

Page 74: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

74

Program 3

noitpircseD eciohC margorPedoc

)99~00(edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

22D

12

)32~00()ruoh(emiTtratStnacifingiS

rebmun::

D02

D91

)95~00()etunim(emiTtratStnacifingiS

rebmun::

D81

D71

)32~00()ruoh(emiTdnEtnacifingiS

rebmun::

D61

D51

)95~00()etunim(emiTdnEtnacifingiS

rebmun::

D41

D31

)32~00()ruoh(emiTkaerBtnacifingiS

rebmun::

D21

D11

)95~00()etunim(emiTkaerBtnacifingiS

rebmun::

D01

D9

)95~00()etunim(tratSerofeBecarGtnacifingiS

rebmun::

D8

D7

)95~00()etunim(tratSretfAecarGtnacifingiS

rebmun::

D6

D5

)95~00()etunim(dnEerofeBecarGtnacifingiS

rebmun::

D4

D3

)95~00()etunim(dnEretfAecarGtnacifingiS

rebmun::

D2

D1

Worksheet for Schedule

Page 75: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

75QT-2000 Programming Manual

4-1-16 Programming hourly item link

Operation

4. Select “16.Hourly/Item Link” and press the <YES> key.

5. Select an appropriate record, and press the <YES> key.

6. Select an appropriate record, and choose the items from PLU,Sub department, Department, Function, Fixed totalizer, Group,and Void reason.

• If you want to delete the item, move the cursor on anappropriate item, and then press the <NO> key. All itemsbelow the cursor will be deleted. If you press <YES>, thepulldown menu will appear to select an item.

7. Press the <ESC> key to go to the next menu.

Worksheet hor hourly item

0.00

Machine Feature

Machine Feature 9.Tax Table ^ 10.Void Table 11.System Connection 12.I/O Parameter 13.Printer Connection 14.Time Zone 15.Time & Attendance 16.Hourly/Item Link v

0.00

Hourly/Item Link

Hourly/Item Link 1.Time Zone(1) 2.Time Zone(2) 3.Time Zone(3) 4.Time Zone(4) 5.Time Zone(5) 6.Time Zone(6) 7.Time Zone(7) 8.Time Zone(8) v

0.00

Time Zone(1) 0001-031 0001-001 GROSSS0002-031 0002-001 NET0003-031 0003-001 CAID0004-031 0007-001 CHID0005-031 0011-001 CKID0006-031 0015-001 CRID0007-0310008-0310009-0310010-0310011-031

noitpircseD eciohC margorPedoc

.oNdrocerkniL ::::D

8D

7D

6D

5

”0“syawlA :D

4

.oNelifkniL :::D

3D

2D

1

Page 76: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

76

Program 3

0.00

IDC Link

IDC Link 1.IDC Link(1) 2.IDC Link(2) 3.IDC Link(3) 4.IDC Link(4) 5.IDC Link(5) 6.IDC Link(6) 7.IDC Link(7) 8.IDC Link(8) v

0.00

IDC Link(1)

0001-804 0001-004 PLU0001

Store File IDC(1) Store Data Whole Transaction

0.00

Machine Feature

Machine Feature 11.System Connection^ 12.I/O Parameter 13.Printer Connection 14.Time Zone 15.Time & Attendance 16.Hourly/Item Link

17.IDC Link

4-1-17 Programming IDC link

Operation

4. Select “18.IDC Link” and press the <YES> key.

5. Select an appropriate record, and press the <YES> key.

6. Select an appropriate item and press the <YES> key to choosean option.

7. Press the <ESC> key to return to the previous menu.

Field Meanings:

1. Item code:• Choose an item from the pulldown menu of each file as below.

PLU, Sub-Department, Department, Free Function, Pull Down GroupClerk

If you choose Clerk, then whole transaction is stored regardless “Store Data”option.• You can input the items directly from PLU, Sub-Department, Department and Free

Function. The PLU#, S-DEPT#, DEPT#, LIST# and COUPON# keys are possibleto use.

• To clear the record, enter “0” and then press the <YES> key.

2. Store File:Specify the option for the Store File.No., IDC(1), IDC(2), IDC(3)

3. Store Data:Specify the option for the Store File.Item only, Whole Transaction

Page 77: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

77QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

"0"syawlA ;D

21

elifkniLCDIyficepS3=)3(CDI,2=)2(CDI,1=)1(CDI,0=kniloN

tnacifingiSrebmun

:D

11

"0"syawlA ;D

01

:CDIroftegraT1=noitcnuf/metiylnO,0=snoitcasnartllA

tnacifingiSrebmun

:D

9

CDIroftegratehtfo.oNdroceRtnacifingiS

rebmun::::

D8

D7

D6

D5

"0"syawlA ;D

4

CDIroftegratehtfo.oNeliFtnacifingiS

rebmun:::

D3

D2

D1

Worksheet for IDC

Page 78: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

78

Program 3

4-2. Programming clerks

Preparation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> to assign Program 1 mode.

3. Select “2.Clerk” and press the <YES> key.

4-2-1 Programming clerk features

Operation

4. Select “1.Clerk Feature” and press the <YES> key.

5. Select an appropriate clerk and press the <YES> key.

0.00

P3 C01 15-12-97 12:34 000000

PGM3 1.Machine Feature 2.Clerk 3.Key Feature

0.00

Clerk

Clerk 1.Clerk Feature 2.Operation 3.Commission Rate 4.Table Range 5.Range 6.Cashier Detail

0.00

Clerk Feature

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

Page 79: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

79QT-2000 Programming Manual

6. Select an appropriate record and choose options.7. After programming, press the <ESC> key to return to the

previous menu.

Field meaning1. Type of operator:

Choose “Cashier/Clerk/Manager.”2. Use LCD on right hand side:

Choose “Non/1st Display/2nd Display.”3. Void operation:

Choose “Current only/Complete void/Not allowed.”4. Descriptor (16 digits)5. Secret code (1~9999)6. Check number for clerk interrupt (1~999999)7. Drawer number (1~2)

0.00

Record No. 1Descriptor C01Secret number 1Check No. for Clerk Interrupt 1Drawer number 0Type of operator CashierTreat as trainee NOAllow clerk to open check No. belonging to another clerks NOAllow clerk to sign onClerk sign off when receipt isissued YESv

0.00

Record No. 1Check No for Clerk Interrupt 0^Drawer number 0Type of operator CashierTreat as Trainee NOAllow clerk to open check No. belonging to another clerks NOAllow clerk to sign on NOClerk sign off when receipt isissued YESUse LCD on right hand side NonVoid operation Current only

Page 80: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

80

Program 3

4-2-2 Programming operation

Preparation

4. Select “2.Operation” and press the <YES> key.

4-2-2-1 Programming clerk control

Operation

5. Select “1.Clerk Control” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and choose options.8. After programming, press the <ESC> key to return to the

previous menu.

0.00

Clerk Control

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1Check No. Compulsory NOTable No. Compulsory NONo. of Customer Compulsory NOGST RCT Compulsory(Finalize) NOGST RCT Compulsory(NB) NOSlip Automatic Batch PrintCompulsory(Finalize) NOSLIP Automatic Batch PrintCompulsory(NB) NOSeat Number Compulsory NOEat in/Take-out Compulsory NO

0.00

Clerk

Clerk 1.Clerk Feature 2.Operation 3.Commission Rate 4.Table Range 5.Range 6.Cashier Detail

0.00

Operation

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

Page 81: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

81QT-2000 Programming Manual

4-2-2-2 Programming menu shift/2nd@

Operation

5. Select “2.Menu Shift/2nd@” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and choose options.8. After programming, press the <ESC> key to return to the

previous menu.

Field meaning1. Allow to operate 1st ~ 8th Menu:

Allow/Prohibit to register by n-th (n = 1 ~ 8) Menu.2. Menu shift after sign on: (1~8)

Price shift after sign on: (1~2)Default menu sheet No. or @ menu sheet No. after signing on.

3. Menu shift status/stay down:Price shift status/stay down:Not maintain/Maintain menu sheet No./@ menu sheet No. after item registration.

0.00

Record No. 1Allow to operate 1st Menu YESAllow to operate 2nd Menu YESAllow to operate 3rd Menu YESAllow to operate 4th Menu YESAllow to operate 5th Menu YESAllow to operate 6th Menu YESAllow to operate 7th Menu YESAllow to operate 8th Menu YESMenu shift after sign on 0Price shift after sign on 0Menu shift Statusv

0.00

Record No. 1Allow to operate 2nd Menu YES^Allow to operate 3rd Menu YESAllow to operate 4th Menu YESAllow to operate 5th Menu YESAllow to operate 6th Menu YESAllow to operate 7th Menu YESAllow to operate 8th Menu YESMenu shift after sign on 0Price shift after sign on 0Menu shift StatusPrice shift Status

0.00

Operation

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Menu Shift / 2nd@

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

Page 82: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

82

Program 3

4-2-2-3 Programming mode control

Operation

5. Select “3.Mode Control” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and choose options.8. After programming, press the <ESC> key to return to the

previous menu.

Field meaning1. Allow to operate Auto PGM:

Allow to download/upload program.2. Allow to operate Infrared:

Allow to use Infrared port.

0.00

Operation

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Mode Control

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1Allow to operate REG Mode YESAllow to operate RF Mode YESAllow to operate REG- Mode YESAllow to operate PGM1 Mode YESAllow to operate PGM2 Mode YESAllow to operate PGM3 Mode YESAllow to operate PGM4 Mode YESAllow to operate PGM5 Mode YESAllow to operate PGM6 Mode YESAllow to operate PGM7 Mode YESAllow to operate X/Z Mode YESv

0.00

Record No. 1Allow to operate PGM3 Mode YES^Allow to operate PGM4 Mode YESAllow to operate PGM5 Mode YESAllow to operate PGM6 Mode YESAllow to operate PGM7 Mode YESAllow to operate X/Z Mode YESAllow to operate Manager Mode YESAllow to operate Inline Mode YESAllow to operate AutoPGM YESAllow to operate Irfrared YESDefault mode after sign on REG

Page 83: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

83QT-2000 Programming Manual

4-2-2-4 Programming function control 1

Operation

5. Select “4.Allowed function 1” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and press the <YES>/<NO>key.

8. After programming, press the <ESC> key to return to theprevious menu.

0.00

Operation

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Allowed function 1

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1Cash YESCharge YESCheck YESCredit YESNew Balance YESPrice Inquiry YESStock Inquiry YESOperate Character Recall YESCharacter Print YESCheck Print YESClerk Transfer YESv

0.00

Record No. 1Table Transfer YES^Tip YESNormal Receipt YESLoan YESReceived on Account YESPaid Out YESPick Up YESCoupon YESDeposit YESMinus YES% Minus YESv

0.00

Record No. 1Received on Account YES^Paid Out YESPick Up YESCoupon YESDeposit YESMinus YES% Minus YESPlus YES% Plus YESRefund YESCoupon2 YES

Page 84: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

84

Program 3

4-2-2-5 Programming function control 2

Operation

5. Select “5.Allowed function 2” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and press the <YES>/<NO>key.

8. After programming, press the <ESC> key to return to theprevious menu.

0.00

Operation

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Allowed function 2

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1Validation YESReceipt YESCheck Endorsement YES# YES#/Non Sales YESNon Sales YESNumber of Customer YESArrangement YESCurrency Exchange YESVAT YESBill Copy YESv

0.00

Record No. 1SLIP Back Feed/Release YES^SLIP Print YESSLIP Feed/Release YEST/S YESTable Number YESMoney Declaration YESTax Exempt YESMenu Shift YESLC Open YESPreset Open YES1st unit price shift YESv

0.00

Record No. 1SLIP Feed/Release YES^T/S YESTable Number YESMoney Declaration YESTax Exempt YESMenu Shift YESLC Open YESPreset Open YES1st unit price shift YES2nd unit price shift YESClerk Number YES

Page 85: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

85QT-2000 Programming Manual

4-2-2-6 Programming function control 3

Operation

5. Select “6.Allowed function 3” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and press the <YES>/<NO>key.

8. After programming, press the <ESC> key to return to theprevious menu.

0.00

Record No. 1Operator X/Z YESSubtotal YESReceipt on/off YESTAST YESOperator Number YESMDST YESX YESX/For YESX/XX YESX/XXX YESKetten Bon YESv

0.00

Record No. 1X/XX YES^X/XXX YESKetten Bon YESSelective Item ST YESNew Check YESOld Check YESNew/Old Check YESAdd Check YESSeparate Check YESClock-in/out YESBreak-in/out YES

0.00

Operation

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Allowed function 3

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

Page 86: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

86

Program 3

4-2-2-7 Programming function control 4

Operation

5. Select “7.Allowed function 4” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and press the <YES>/<NO>key.

8. After programming, press the <ESC> key to return to theprevious menu.

0.00

Operation

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Allowed function 4

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1Substitution YESHouse Bon YESOperator Open Check YESMedia Change YESSeat Number YESDisplay On/Off YESREG Mode YESX/Z Mode YESPGM Mode YESPost Entry YESRound Repeat YESv

0.00

Record No. 1Round Repeat YES^Eat-in YESTake-out YESStore YESRecall YESReverse Display YESJMEMO YESHome Position YESDisplay Mode Change YESAll Void (Current only) YESAll Void (Complete Void) YES

Page 87: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

87QT-2000 Programming Manual

4-2-2-8 Programming function control 5

Operation

5. Select “8.Allowed function 5” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and press the <YES>/<NO>key.

8. After programming, press the <ESC> key to return to theprevious menu.

0.00

Operation

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Allowed function 5

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1Price YESPLU Number YESSub Department Number YESDepartment Number YESList Number YESTouch PLU YESTouch Department YESTouch Sub Department YESTouch List YES

Page 88: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

88

Program 3

4-2-2-9 Programming arrangement control

Operation

5. Select “9.Arrangement” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and press the <YES>/<NO>key.

8. After programming, press the <ESC> key to return to theprevious menu.

0.00

Arrangement

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1ARG GP(1) Opration YESARG GP(2) Opration YESARG GP(3) Opration YESARG GP(4) Opration YESARG GP(5) Opration YESARG GP(6) Opration YESARG GP(7) Opration YESARG GP(8) Opration YESARG GP(9) Opration YESARG GP(10) Opration YES

0.00

Operation

Operation 3.Mode control ^ 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5 9.Arrangement 10.Report

Page 89: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

89QT-2000 Programming Manual

4-2-2-10 Programming X/Z report control

Operation

5. Select “10.Report” and press the <YES> key.

6. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and press the <YES>/<NO>key.

8. After programming, press the <ESC> key to return to theprevious menu.

0.00

Operation

Operation 3.Mode control ^ 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5 9.Arrangement 10.Report

0.00

Report

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1Daily X YESDaily Z YESPeriodic(1) X YESPeriodic(1) Z YESPeriodic(2) X YESPeriodic(2) Z YESConsolidation X YESConsolidation Z YESBatch X/Z(1) YESBatch X/Z(2) YESBatch X/Z(3) YESv

0.00

Record No. 1Batch X/Z(4) YESBatch X/Z(5) YESBatch X/Z(6) YESBatch X/Z(7) YESBatch X/Z(8) YESBatch X/Z(9) YESBatch X/Z(10) YESOperator X YESOperator Z YESIndividual totalizer X/Z YESIndividual X/Z (Key direct) YESv

0.00

Record No. 1Batch X/Z(5) YES^Batch X/Z(6) YESBatch X/Z(7) YESBatch X/Z(8) YESBatch X/Z(9) YESBatch X/Z(10) YESOperator X YESOperator Z YESIndividual totalizer X/Z YESIndividual X/Z (Key direct) YESIndividual X/Z (Others) YES

Page 90: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

90

Program 3

4-2-3 Programming commission rate

Operation

4. Select “3.Commission Rate” and press the <YES> key.

5. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and enter value (0~9999), andthen press the <YES> key.

8. After programming, press the <ESC> key to return to theprevious menu.

0.00

Clerk

Clerk 1.Clerk Feature 2.Operation 3.Commission Rate 4.Table Range 5.Range 6.Cashier Detail

0.00

Commission Rate

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1Commission Rate(1) 0.00Commission Rate(2) 0.00

Page 91: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

91QT-2000 Programming Manual

0.00

Clerk

Clerk 1.Clerk Feature 2.Operation 3.Commission Rate 4.Table Range 5.Range 6.Cashier Detail

0.00

Table Range

Clerk Feature 1.C01 2.C02 3.C03 4.C04 5.C05 6.C06 7.C07 8.C08 v

0.00

Record No. 1Start Table Range 0End Table Range 0

4-2-4 Programming table range

Operation

4. Select “4.Table Range” and press the <YES> key.

5. Select an appropriate clerk and press the <YES> key.

7. Select an appropriate record and enter values (0 ~ 999999),and then press the <YES> key.

8. After programming, press the <ESC> key to return to theprevious menu.

Page 92: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

92

Program 3

4-2-5 Programming clerk by range

Preparation

4. Select “5.Range” and press the <YES> key.

4-2-5-1 Programming clerk control by range

Operation

5. Select “1.Clerk Control” and press the <YES> key.

6. Select an appropriate record and choose options.7. After programming, press the <ESC> key to proceed to the

next step.

0.00

Clerk

Clerk 1.Clerk Feature 2.Operation 3.Commission Rate 4.Table Range 5.Range 6.Cashier Detail

0.00

Range

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Clerk ControlCheck No. Compulsory NOTable No. Compulsory NONo. of Customer Compulsory NOGST RCT Compulsory(Finalize) NOGST RCT Compulsory(NB) NOSlip Automatic Batch PrintCompulsory(Finalize) NOSLIP Automatic Batch PrintCompulsory(NB) NOSeat Number Compulsory NO

Page 93: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

93QT-2000 Programming Manual

8. Enter the start range No. and press the <YES> key.(It starts "0001" if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

4-2-5-2 Programming menu shift/2nd@ by range

Operation

5. Select “2.Menu Shift / 2nd@” and press the <YES> key.

6. Select an appropriate record and choose options.7. After programming, press the <ESC> key to return to the

previous menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

0.00

Range

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Menu Shift / 2nd@Allow to operate 1st Menu YESAllow to operate 2nd Menu YESAllow to operate 3rd Menu YESAllow to operate 4th Menu YESAllow to operate 5th Menu YESAllow to operate 6th Menu YESAllow to operate 7th Menu YESAllow to operate 8th Menu YESMenu shift after sign on 0Price shift after sign on 0Menu shift Statusv

0.00

Menu Shift / 2nd@Allow to operate 2nd Menu YES^Allow to operate 3rd Menu YESAllow to operate 4th Menu YESAllow to operate 5th Menu YESAllow to operate 6th Menu YESAllow to operate 7th Menu YESAllow to operate 8th Menu YESMenu shift after sign on 0Price shift after sign on 0Menu shift StatusPrice shift Status

0.00

Menu Shift / 2nd@

Enter Start range 0 End range 0

OK? YES

0.00

Menu Shift / 2nd@

Enter Start range 1 End range 123

OK? YES

0.00

Clerk Control

Enter Start range 0 End range 0

OK? YES

0.00

Clerk Control

Enter Start range 1 End range 123

OK? YES

Page 94: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

94

Program 3

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

4-2-5-3 Programming mode control by range

Operation

5. Select “3.Mode Control” and press the <YES> key.

6. Select an appropriate record and choose options.7. After programming, press the <ESC> key to proceed to the

next step.

Field meaning1. Allow to operate Auto PGM:

Allow to download/upload program.2. Allow to operate Infrared:

Allow to use Infrared port.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Range

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Record No. 1Allow to operate REG Mode YESAllow to operate RF Mode YESAllow to operate REG- Mode YESAllow to operate PGM1 Mode YESAllow to operate PGM2 Mode YESAllow to operate PGM3 Mode YESAllow to operate PGM4 Mode YESAllow to operate PGM5 Mode YESAllow to operate PGM6 Mode YESAllow to operate PGM7 Mode YESAllow to operate X/Z Mode YESv

0.00

Record No. 1Allow to operate PGM3 Mode YES^Allow to operate PGM4 Mode YESAllow to operate PGM5 Mode YESAllow to operate PGM6 Mode YESAllow to operate PGM7 Mode YESAllow to operate X/Z Mode YESAllow to operate Manager Mode YESAllow to operate Inline Mode YESAllow to operate AutoPGM YESAllow to operate Irfrared YESDefault mode after sign on REG

0.00

Mode Control

Enter Start range 0 End range 0

OK? YES

0.00

Mode Control

Enter Start range 1 End range 123

OK? YES

Page 95: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

95QT-2000 Programming Manual

4-2-5-4 Programming function control 1 by range

Operation

5. Select “4.Allowed function 1” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. After programming, press the <ESC> key to return to theprevious menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Range

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Record No. 1Cash YESCharge YESCheck YESCredit YESNew Balance YESPrice Inquiry YESStock Inquiry YESOperate Character Recall YESCharacter Print YESCheck Print YESClerk Transfer YESv

0.00

Record No. 1Table Transfer YES^Tip YESNormal Receipt YESLoan YESReceived on Account YESPaid Out YESPick Up YESCoupon YESDeposit YESMinus YES% Minus YESv

0.00

Record No. 1Received on Account YES^Paid Out YESPick Up YESCoupon YESDeposit YESMinus YES% Minus YESPlus YES% Plus YESRefund YESCoupon2 YES

0.00

Allowed function 1

Enter Start range 0 End range 0

OK? YES

0.00

Allowed function 1

Enter Start range 1 End range 123

OK? YES

Page 96: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

96

Program 3

4-2-5-5 Programming function control 2 by range

Operation

5. Select “5.Allowed function 2” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. After programming, press the <ESC> key to return to theprevious menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Record No. 1Validation YESReceipt YESCheck Endorsement YES# YES#/Non Sales YESNon Sales YESNumber of Customer YESArrangement YESCurrency Exchange YESVAT YESBill Copy YESv

0.00

Record No. 1SLIP Back Feed/Release YES^SLIP Print YESSLIP Feed/Release YEST/S YESTable Number YESMoney Declaration YESTax Exempt YESMenu Shift YESLC Open YESPreset Open YES1st unit price shift YESv

0.00

Range

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Allowed function 2

Enter Start range 0 End range 0

OK? YES

0.00

Allowed function 2

Enter Start range 1 End range 123

OK? YES

0.00

Record No. 1SLIP Feed/Release YES^T/S YESTable Number YESMoney Declaration YESTax Exempt YESMenu Shift YESLC Open YESPreset Open YES1st unit price shift YES2nd unit price shift YESClerk Number YES

Page 97: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

97QT-2000 Programming Manual

4-2-5-6 Programming function control 3 by range

Operation

5. Select “6.Allowed function 3” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. After programming, press the <ESC> key to return to theprevious menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Range

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Record No. 1Operator X/Z YESSubtotal YESReceipt on/off YESTAST YESOperator Number YESMDST YESX YESX/For YESX/XX YESX/XXX YESKetten Bon YESv

0.00

Record No. 1X/XX YES^X/XXX YESKetten Bon YESSelective Item ST YESNew Check YESOld Check YESNew/Old Check YESAdd Check YESSeparate Check YESClock-in/out YESBreak-in/out YES

0.00

Allowed function 3

Enter Start range 0 End range 0

OK? YES

0.00

Allowed function 3

Enter Start range 1 End range 123

OK? YES

Page 98: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

98

Program 3

4-2-5-7 Programming function control 4 by range

Operation

5. Select “7.Allowed function 4” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. After programming, press the <ESC> key to return to theprevious menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Range

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Record No. 1Substitution YESHouse Bon YESOperator Open Check YESMedia Change YESSeat Number YESDisplay On/Off YESREG Mode YESX/Z Mode YESPGM Mode YESPost Entry YESRound Repeat YESv

0.00

Record No. 1Round Repeat YES^Eat-in YESTake-out YESStore YESRecall YESReverse Display YESJMEMO YESHome Position YESDisplay Mode Change YESAll Void (Current only) YESAll Void (Complete Void) YES

0.00

Allowed function 4

Enter Start range 0 End range 0

OK? YES

0.00

Allowed function 4

Enter Start range 1 End range 123

OK? YES

Page 99: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

99QT-2000 Programming Manual

4-2-5-8 Programming function control 5 by range

Operation

5. Select “8.Allowed function 5” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. After programming, press the <ESC> key to return to theprevious menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Record No. 1Price YESPLU Number YESSub Department Number YESDepartment Number YESList Number YESTouch PLU YESTouch Department YESTouch Sub Department YESTouch List YES

0.00

Range

Operation 1.Clerk Control 2.Menu Shift/2nd@ 3.Mode Control 4.Allowed function 1 5.Allowed function 2 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5v

0.00

Allowed function 5

Enter Start range 0 End range 0

OK? YES

0.00

Allowed function 5

Enter Start range 1 End range 123

OK? YES

Page 100: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

100

Program 3

4-2-5-9 Programming arrangement control by range

Operation

5. Select “9.Arrangement” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. After programming, press the <ESC> key to return to theprevious menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Range

Operation 5.Allowed function 2^ 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5 9.Arrangement 10.Report 11.Commission Rate 12.Table Range

0.00

Record No. 1ARG GP(1) Opration YESARG GP(2) Opration YESARG GP(3) Opration YESARG GP(4) Opration YESARG GP(5) Opration YESARG GP(6) Opration YESARG GP(7) Opration YESARG GP(8) Opration YESARG GP(9) Opration YESARG GP(10) Opration YES

0.00

Arrangement

Enter Start range 0 End range 0

OK? YES

0.00

Arrangement

Enter Start range 1 End range 123

OK? YES

Page 101: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

101QT-2000 Programming Manual

4-2-5-10 Programming X/Z report control by range

Operation

5. Select “10.Report” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. After programming, press the <ESC> key to return to theprevious menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Record No. 1Daily X YESDaily Z YESPeriodic(1) X YESPeriodic(1) Z YESPeriodic(2) X YESPeriodic(2) Z YESConsolidation X YESConsolidation Z YESBatch X/Z(1) YESBatch X/Z(2) YESBatch X/Z(3) YESv

0.00

Record No. 1Batch X/Z(4) YESBatch X/Z(5) YESBatch X/Z(6) YESBatch X/Z(7) YESBatch X/Z(8) YESBatch X/Z(9) YESBatch X/Z(10) YESOperator X YESOperator Z YESIndividual totalizer X/Z YESIndividual X/Z (Key direct) YESv

0.00

Record No. 1Batch X/Z(5) YES^Batch X/Z(6) YESBatch X/Z(7) YESBatch X/Z(8) YESBatch X/Z(9) YESBatch X/Z(10) YESOperator X YESOperator Z YESIndividual totalizer X/Z YESIndividual X/Z (Key direct) YESIndividual X/Z (Others) YES

0.00

Range

Operation 5.Allowed function 2^ 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5 9.Arrangement 10.Report 11.Commission Rate 12.Table Range

0.00

Report

Enter Start range 0 End range 0

OK? YES

0.00

Report

Enter Start range 1 End range 123

OK? YES

Page 102: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

102

Program 3

4-2-5-11 Programming commission rate by range

Operation

5. Select “11.Commission Rate” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. After programming, press the <ESC> key to return to theprevious menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Range

Operation 5.Allowed function 2^ 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5 9.Arrangement 10.Report 11.Commission Rate 12.Table Range

0.00

Commission RateCommission Rate(1) 0.00Commission Rate(2) 0.00

0.00

Commission Rate

Enter Start range 0 End range 0

OK? YES

0.00

Commission Rate

Enter Start range 1 End range 123

OK? YES

Page 103: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

103QT-2000 Programming Manual

4-2-5-12 Programming table range by range

Operation

5. Select “12.Table Range” and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. After programming, press the <ESC> key to return to theprevious menu.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

Table RangeStart Table Range 0End Table Range 0

0.00

Range

Operation 5.Allowed function 2^ 6.Allowed function 3 7.Allowed function 4 8.Allowed function 5 9.Arrangement 10.Report 11.Commission Rate 12.Table Range

0.00

Table Range

Enter Start range 0 End range 0

OK? YES

0.00

Table Range

Enter Start range 1 End range 123

OK? YES

Page 104: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

104

Program 3

0.00

Clerk

Clerk 1.Clerk Feature 2.Operation 3.Commission Rate 4.Table Range 5.Range 6.Cashier Detail

0.00

Cashier Detail0001-030 0001-001 GROSS0002-030 0002-001 NET0003-030 0003-001 CAID0004-030 0001-006 GRP0010005-030 0005-006 PLU0010006-030 0001-002 CASH0007-0300008-0300009-0300010-030

0.00

Cashier Detail

Item 1.Fixed Totalizer 2.Free Function 3.PLU 4.Sub-Department 5.Dept 6.Group 7.Void Table

0.00

Cashier Detail

Fixed Totalizer 1.GROSS 2.NET 3.CAID 4.CATL 5.CA+ 6.CA- 7.CHID 8.CHTL v

4-2-6 Programming cashier detail

Operation

4. Select “6.Cashier Detail” and press the <YES> key.

Addition/Modification

7. Select a record you want to add an item or modify the item andpress the <YES> key.

8. Select a file which you want to program.

9. Select a record which you want to program.10. Repeat step 7 to 9, until completing this pulldown group item

program.11. Press <ESC> key to terminate the program and proceed the

next step.

Page 105: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

105QT-2000 Programming Manual

0.00

Cashier Detail0001-030 0001-001 GROSS0002-030 0002-001 NET0003-030 0003-001 CAID0004-030 0001-006 GRP0010005-030 0005-006 PLU0010006-030 0001-002 CASH0007-0300008-0300009-0300010-030

0.00

Cashier Detail

Item 01-10 Delete OK? Yes

Deletion

6. Select the smallest record you want to delete the item(s) andpress the <NO> key.

7. Press the <YES> key.8. Press the <ESC> key to return to the previous menu.

Page 106: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

106

Program 3

4-3. Programming key features

Preparation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> to assign Program 3 mode.

3. Select “3.Key Feature” and press the <YES> key.

4-3-1. Programming PLU features

Operation

4. Select “1.PLU” and press the <YES> key.

5. Select an appropriate item directly, by entering record No. orby entering PLU No. and press the <YES> key.

0.00

P3 C01 15-12-97 12:34 000000

PGM3 1.Machine Feature 2.Clerk 3.Key Feature

0.00

Key Feature

Key Feature 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.Individual PGM 7.Function Key

0.00

Key Feature

PLU 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

0.00

Record No. 1Use Random code 123456Descriptor PLU0001 Price 0.00Receipt type Normal ItemItem type Normal ItemGroup Link --------Dept Link --------Sub-Dept Link --------Taxable status Non TaxCommission NoneSelective item Nonev

0.00

Record No. 1Order color Black^Order Printer #1 NO Order Printer #2 NOOrder Printer #3 NOOrder Printer #4 NOOrder Printer #5 NOOrder Printer #6 NOOrder Printer #7 NOOrder char Link --------Number of Bon 0Unit stock 0.000v

Page 107: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

107QT-2000 Programming Manual

6. Select an appropriate record and press the <YES>/<NO>key.

7. Press the <ESC> key to return to the previous menu.

Field meaning1. Receipt type:

You can choose “Normal Item” or “Sigle Item.”2. Item type:

You can choose “Normal item”, “Condiment” or “Preparation.”3. Order color:

You can choose “Black” or “Red.”4. Order Printer #1 ~ #7:

These numbers are defined in the printer definition table5. Random code: 000001-999999, Descriptor: 0-24 character, Number of Bon: 1-9,

Minimum stock: 0.001-99.999, Unit stock: 0.001-99.999, High amount limit: 0-999999, Low digit limit: 0,1-7

Note:

If you want to delete the program in the group link, dept link, sub-dept link, list link field, enter"0" and press the <YES> key.

0.00

Record No. 1Minimum Stock 0.000^Set Menu Table 0List Link #1 --------List Link #2 --------List Link #3 --------List Link #4 --------Open PLU NOZero Unit Price NONegative Price NOHash Item NOHigh Amount Limit 0.00v

0.00

Record No. 1Negative Price NO^Hash Item NOHigh Amount Limit 0.00List Link #4 --------Open PLU NOZero Unit Price NONegative Price NOHash Item NOHigh Amount Limit 0.00Low Digit Limit 0Multiple VLD N Repeatv

Page 108: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

108

Program 3

4-3-2 Programming PLU 2nd@ features

Operation

4. Select “2.PLU 2nd@” and press the <YES> key.

5. Select an appropriate item directly, by entering record No. orby entering PLU No. and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. Press the <ESC> key to return to the previous menu.

Field meaning1. Size: 0.00-9999.99, Descriptor: 0-24 character, Price: 0-999999

Minimum stock: 0.001-99.999, Unit stock: 0.001-99.999

0.00

Key Feature

Key Feature 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.Individual PGM 7.Function Key

0.00

Key Feature

PLU 2nd@ 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

0.00

Record No. 1 Use Random c 0Descriptor PLU0001 ^Size 0.00Price 0.00Group Link --------Dept Link --------Sub-Dept Link --------Taxable status Non TaxUnit Stock 0.000Minimum Stock 0.000Zero Unit Price NOv

Page 109: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

109QT-2000 Programming Manual

4-3-3 Programming subdepartment features

Operation

4. Select “3.Sub-Department” and press the <YES> key.

5. Select an appropriate item directly or by entering record No.and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. Press the <ESC> key to return to the previous menu.

Field meaning1. Descriptor: 0-24 character, Price: 0-999999, Number of Bon: 1-9,

High amount limit: 0-999999, Low digit limit: 0,1-7

0.00

Key Feature

Key Feature 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.Individual PGM 7.Function Key

0.00

Key Feature

Sub-Department 1.SUBDEPT01 2.SUBDEPT02 3.SUBDEPT03 4.SUBDEPT04

0.00

Record No. 1Descriptor SUBDEPT01Price 0.00Receipt Type Normal ItemGroup Link --------Dept Link --------Taxable status Non TaxCommission NoneSelective item NoneOrder color BlackOrder Printer #1 NOOrder Printer #2 NOv

0.00

Record No. 1Order Printer #3 NO^Order Printer #4 NOOrder Printer #5 NOOrder Printer #6 NOOrder Printer #7 NOOrder Char Link --------Number of Bon 0List Link #1 --------List Link #2 --------List Link #3 --------List Link #4 --------v

0.00

Record No. 1Number of Bon 0^List Link #1 --------List Link #2 --------List Link #3 --------List Link #4 --------Zero Unit Price NONegative Price NOHash Item NOHigh Amount Limit 0.00Low Digit Limit 0Multiple VLD N Repeat

Page 110: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

110

Program 3

4-3-4 Programming department features

Operation

4. Select “4.Department” and press the <YES> key.

5. Select an appropriate item directly or by entering record No.and press the <YES> key.

6. Select an appropriate record and press the <YES>/<NO>key.

7. Press the <ESC> key to return to the previous menu.

Field meaning1. Descriptor: 0-24 character, Price: 0-999999, Number of Bon: 1-9,

High amount limit: 0-999999, Low digit limit: 0, 1-7

0.00

Key Feature

Key Feature 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.Individual PGM 7.Function Key

0.00

Key Feature

Department 1.DEPT01 2.DEPT02 3.DEPT03 4.DEPT04

0.00

Record No. 1Descriptor DEPT01Price 0.00Receipt Type Normal ItemGroup Link --------Taxable status Non TaxCommission NoneSelective item NoneOrder color BlackOrder Printer #1 NOOrder Printer #2 NOOrder Printer #3 NOv

0.00

Record No. 1Order Printer #4 NO^Order Printer #5 NOOrder Printer #6 NOOrder Printer #7 NOOrder Char Link --------Number of Bon 0List Link #1 --------List Link #1 --------List Link #1 --------List Link #1 --------Zero Unit Price NOv

0.00

Record No. 1Number of Bon 0^List Link #1 --------List Link #2 --------List Link #3 --------List Link #4 --------Zero Unit Price NONegative Price NOHash Item NOHigh Amount Limit 0.00Low Digit Limit 0Multiple VLD N Repeat

Page 111: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

111QT-2000 Programming Manual

4-3-5 Programming by range

Operation

4. Select “5.Range” and press the <YES> key.

Select the subject you want to program

5. Select“1.PLU/2.PLU 2nd@/3.Sub-Department/4.Department”and press the <YES> key.

0.00

Key Feature

Key Feature 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.Individual PGM 7.Function Key

0.00

Range

Range 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Deparment

0.00

Range

Range 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Deparment

0.00

Range

Range 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Deparment

0.00

Range

Range 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Deparment

Page 112: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

112

Program 3

4-3-5-1 General procedure of PLU, PLU 2nd@, subdepartment, department by range

6. Select an appropriate job (refer to the next page) and press the<YES> key.

7. Select an appropriate type and press the <YES> key.

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.)(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

0.00

PLU

Range 1.Receipt type 2.Item Type 3.Group Link 4.Dept Link 5.Sub-Dept link 6.Taxable status 7.Commission 8.Selective item v

0.00

Receipt Type

Receipt Type Normal Item

Enter Start range 0 End range 0

OK? YES

0.00

Receipt Type

Receipt Type Normal Item

Enter Start range 1 End range 0

OK? YES

0.00

Receipt Type

Receipt Type Normal Item

Enter Start range 1 End range 50

OK? YES

Page 113: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

113QT-2000 Programming Manual

4-3-5-2 Programming hierarchy of programming title

PLU PLU 2nd@ Sub-Dept Dept1. Receipt Type 1. Receipt Type 1. Receipt Type2. Item Type3. Group Link 1. Group Link 2. Group Link 2. Group Link4. Dept Link 2. Dept Link 3. Dept Link5. Sub-Dept Link 3. Sub-Dept Link6. Taxable Status 4. Taxble Status 4. Taxable Status 3. Taxable Status7. Commission 5. Commission 4. Commission8. Selective item 6. Selective item 5. Selective item9. Order color 7. Order color 6. Order color

10. Order Printer #1 8. Order Printer #1 7. Order Printer #111. Order Printer #2 9. Order Printer #2 8. Order Printer #212. Order Printer #3 10. Order Printer #3 9. Order Printer #313. Order Printer #4 11. Order Pirnter #4 10. Order Printer #414. Order Printer #5 12. Order Printer #5 11. Order Printer #515. Order Printer #6 13. Order Printer #6 12. Order Printer #616. Order Printer #7 14. Order Printer #7 13. Order Printer #717. Order Char Link 15. Order Char Link 14. Order Char Link18. Number of Bon 16. Number of Bon 15. Number of Bon19. Unit Stock 5. Unit Stock20. Minimum Stock 6. Minimum Stock21. Set Menu Table22. List Link #1 17. List Link #1 16. List Link #123. List Link #2 18. List Link #2 17. List Link #224. List Link #3 19. List Link #3 18. List Link #325. List Link #4 20. List Link #4 19. List Link #426. Open PLU27. Zero Unit Price 7. Zero Unit Price 21. Zero Unit Price 20. Zero Unit Price28. Negative Price 22. Negative Price 21. Negative Price29. Hash Item 23. Hash Item 22. Hash Item30. High Amount Limit 24. High Amount Limit 23. High Amount Limit31. Low Digit Limit 25. Low Digit Limit 24. Low Digit Limit32. Multiple VLD 26. Multiple VLD 25. Multiple VLD

future

Page 114: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

114

Program 3

4-3-6 Programming individual program

Operation

4. Select “6.Individual PGM” and press the <YES> key.

Select a job you want to program5. Select jobs listed below.

1. Receipt Type 17. Order Char Link 2. Item Type 18. Number of Bon: 0-9

3. Group Link 19. Unit Stock: 0.001-99.99994. Dept Link 20. Minimum Stock: 0.001-99.99995. Sub-Dept Link 21. Set Menu table6. Taxable status 22. List Link #17. Commission 23. List Link #28. Selective item 24. List Link #39. Order color 25. List Link #4

10. Order Print #1 26. Open PLU11. Order Print #2 27. Zero Unit Price12. Order Print #3 28. Negative Price13. Order Print #4 29. Hash Item14. Order Print #5 30. High Amount Limit: 0-99999915. Order Print #6 31. Low Digit Limit: 0,1-716. Order Print #7 32. Multiple VLD

and press the <YES> key.

6. Select the option you want to program and press the <YES>key.

7. Enter PLU Nos. or press keys you want to program.8. Press the <ESC> key to return to the previous menu.

0.00

Key Feature

Key Feature 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.Individual PGM 7.Function Key

0.00

Individual PGM

Individual PGM 1.Receipt Type 2.Item Type 3.Group Link 4.Dept Link 5.Sub-Dept Link 6.Taxable status 7.Commission 8.Selective item v

0.00

Individual PGM

Receipt Type Normal Item

Enter PLU No or touch keys.

PLU0003

Receipt Type Normal ItemPLU0001 0001-004PLU0002 0002-004PLU0003 0003-004

future

Page 115: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

115QT-2000 Programming Manual

4-3-7 Programming key function program

Operation

4. Select “7.Function Key” and press the <YES> key.

5. Select an appropriate function, enter program code (refer tothe worksheet on the following pages) and press the <YES>key.

6. Press the <ESC> key to return to the previous menu.

0.00

Key Feature

Key Feature 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.Individual PGM 7.Function Key

0.00

Function KeyCash 000000000000Charge 000000000000Check 000000000000RC 000000000000PD 000000000000%- 000000000000%+ 000000000000Subtotal 000000000000Void 000000000000

Page 116: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

116

Program 3

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

.noitareponoitadilavecroF a 0=oN1=seY :

)b+a(D

01

tnuomarofstigidowttsalno)57,05,52,00ot(noitcirtseR)gnidnuorhsinaDni>HSAC<rofylnO(derednet b 0=oN

4=seY

"0"syawlA ;D

9

.gnitnirppilshctabecroF a 0=oN1=seY

:)c+b+a(

D8

.)>KCEHC<rofylnO(gnitnirptnemesrodnekcehcecroF b 0=oN2=seY

.)>KCEHC<rofylnO(gnitnirpkcehcecroF c 0=oN4=seY

tnemyaplaitrapafoyrtnetibihorP a 0=oN1=seY

:)c+b+a(

D7

.derednettnuomaehtfoyrtneehttibihorP b 0=oN2=seY

.derednettnuomaehtfoyrtneecroF c 0=oN4=seY

.nwodkaerbTAVtnirP a 0=oN1=seY

:)c+b+a(

D6

)>KCEHC<rofylnO(noissimmocgnihsackcehC1 tnuomanaesU 2 etaraesU

b 0=tnuomA2=etaR

tnuomanoitadilaV1 tnuomalatotbustnirP 2 derednettnuomatnirP

c 0=latotbuS4=redneT

"0"syawlA ;D

5

gnirednetdnalatotbusrofnoitacificepstimiltnuomahgiHstnuoma

mumixaM)9~0(eulav ::

D4

D3forebmuN

)9~0(sorez

.eudtnuomaegnahcrofnoitacificepstimiltnuomahgiH

mumixaM)9~0(eulav ::

D2

D1forebmuN

)9~0(sorez

4-3-7-1 Worksheet for cash, charge, credit and check

Page 117: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

117QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

.noitareponoitadilavecroF0=oN1=seY

:D

01

"0"syawlA ;D

9

.gnitnirppilshctabecroF a 0=oN1=seY :

)b+a(D

8.desserpsiyekehtnehwrewardnepO b 0=oN2=seY

"0"syawlA ;D

7

.nwodkaerbTAVtnirP a 0=oN1=seY :

)b+a(D

6egrahcecivreS

1 tnuomanaesU 2 etaraesUb 0=tnuomA

2=etaR

"0"syawlA ;;;;;D

5D

4D

3D

2D

1

noitpircseD eciohC margorPedoc

yek"llacerretcarahc"ehtretfaegnahcedomrokrelcwollA)yek"llacerretcarahc"rofylnoevitceffe(.noisserped

0=seY1=oN :

D7.retnirptpiecerselasotsretcarahctnirP

0=seY2=oN

)99~10(.oNdrocerretcarahcredrO)gnimmargorpsraelc"00"(

tnacifingiSrebmun

:D

6

tnacifingiSrebmun

:D

5

)retnirpnehctikrofylnoevitceffe(rolocgnitnirP0=kcalB

1=deR:D

4

.1retnirpredrootsretcarahctnirP a 0=oN1=seY

:)c+b+a(

D3

.2retnirpredrootsretcarahctnirP b 0=oN2=seY

.3retnirpredrootsretcarahctnirP c 0=oN4=seY

.4retnirpredrootsretcarahctnirP a 0=oN1=seY

:)c+b+a(

D2

.5retnirpredrootsretcarahctnirP b 0=oN2=seY

.6retnirpredrootsretcarahctnirP c 0=oN4=seY

.7retnirpredrootsretcarahctnirP0=oN1=seY

:D

1

4-3-7-2 Worksheet for new balance

4-3-7-3 Worksheet for character print, character recall

Page 118: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

118

Program 3

noitpircseD eciohC margorPedoc

)9~0(gnitnirperofebsenildeefkcabforebmuNtnacifingiS

rebmun:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

;rebmunkrelC1 rebmunyromeM 2 rebmunterceskrelC

1 0=2 1=

:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

.gnirrefsnartelbatelihwskcehcddaotwollA0=oN1=seY :

)b+a(D

7.rebmunremotsucehtrefsnarT0=seY2=oN

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

4-3-7-4 Worksheet for check print

4-3-7-5 Worksheet for clerk transfer

4-3-7-6 Worksheet for table transfer

noitpircseD eciohC margorPedoc

noitadilavelpitluM).elbissopsignitnirpnoitadilavenoylno,"oN"fI(

0=seY4=oN

:D

11

"0"syawlA ;;;;D

01D

9D

8D

7

"0"syawlA ;;;D

6D

5D

4

ecirptinuderetneyllaunamrof)LDH(noitatimiltigidhgiHtnacifingiS

rebmun:D

3

"0"syawlA ;;D

2D

1

4-3-7-7 Worksheet for tip

Page 119: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

119QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

.noitareponoitadilavecroF0=oN1=seY

:D

01

"0"syawlA ;;;D

9D

8D

7

"0"syawlA ;;D

6D

5

stnuomagniretnerofnoitacificepstimiltnuomahgiH

mumixaM)9~0(eulav ::

D4

D3forebmuN

)9~0(sorez

"0"syawlA ;;D

2D

1

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

)ecnaussitpiecerretfaevitceffeylno(.noitareponoitadilavecroF0=oN1=seY

:D

01

"0"syawlA ;;;D

9D

8D

7

"0"syawlA ;;D

6D

5

stnuomagniretnerofnoitacificepstimiltnuomahgiH

mumixaM)9~0(eulav ::

D4

D3forebmuN

)9~0(sorez

"0"syawlA ;;D

2D

1

4-3-7-8 Worksheet for loan, pick up

4-3-7-9 Worksheet for received on account, paid out

Page 120: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

120

Program 3

noitpircseD eciohC margorPedoc

noitadilavelpitluM).elbissopsignitnirpnoitadilavenoylno,"oN"fI(

0=seY4=oN

:D

11

"0"syawlA ;;D

01D

9

:iD/uE)xat-noNsnaem"0"(5~1sutatselbaxaT

tnacifingiSrebmun

:)c+b+a(

D8

:eropagniS,.S.U1sutatselbaxaT a 0=oN

1=seY

2sutatselbaxaT b 0=oN2=seY

3sutatselbaxaT c 0=oN4=seY

:adanaC4=4elbaxaT,3=3elbaxaT,2=2elbaxaT,1=1elbaxaT

7=4&1elbaxaT,6=3&1elbaxaT,5=2&1elbaxaT0=elbaxatnoN,8=elbaxatllA

tnacifingiSrebmun

)ylnoNPC,–(.ecnalabtidercwollA1=seY0=oN

:D

7

"0"syawlA ;;D

6D

5

.>latotbuS<retfanoitarepoyekwollA a 0=seY1=oN :

)b+a(D

7.noitartsigermetiretfanoitarepoyekwollA b 0=seY4=oN

ecirptinuderetneyllaunamrof)LDH(noitatimiltigidhgiHtnacifingiS

rebmun:D

3

:sutatsnoissimmoC0=enoN,2=2noissimmoC,1=1noissimmoC

tnacifingiSrebmun

:D

2

"0"syawlA ;D

1

4-3-7-10 Worksheet for plus, minus, coupon

Page 121: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

121QT-2000 Programming Manual

4-3-7-12 Worksheet for void

noitpircseD eciohC margorPedoc

”0“syawlA ;;D

21D

3

).deteledebnacenilaylno,detcelessioNnehW(eteleDmetI1=seY0=oN

:D

2

.nosaerdiovtceleS4=seY0=oN

:D

1

4-3-7-13 Worksheet for check endorsement

noitpircseD eciohC margorPedoc

)9~0(gnitnirperofebdeefkcab-otuaforebmuneniLtnacifingiS

rebmun:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

)ecnaussitpiecerretfaevitceffeylno(.noitareponoitadilavecroF0=oN1=seY

:D

01

"0"syawlA ;;D

9D

8

noitubirttayeK0=+OPED1=–OPED

:D

7

.rewardhsacnepO0=oN1=seY

:D

6

:noitinifedaideM3=tiderc,2=kcehc,1=egrahc,0=hsaC

tnacifingiSrebmun

:D

5

stnuomagniretnerofnoitacificepstimiltnuomahgiH

mumixaM)9~0(eulav ::

D4

D3forebmuN

)9~0(sorez

"0"syawlA ;;D

2D

1

4-3-7-11 Worksheet for deposit+, deposit–

Page 122: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

122

Program 3

4-3-7-14 Worksheet for discount, premium

noitpircseD eciohC margorPedoc

noitadilavelpitluM).elbissopsignitnirpnoitadilavenoylno,"oN"fI(

0=seY4=oN

:D

11

"0"syawlA ;;D

01D

9

:iD/uE)xaT-noNsnaem"0"(5~1sutatselbaxaT

tnacifingiSrebmun

:)c+b+a(

D8

:eropagniS,.S.U1sutatselbaxaT a 0=oN

1=seY

2sutatselbaxaT b 0=oN2=seY

3sutatselbaxaT c 0=oN4=seY

:adanaC4=4elbaxaT,3=3elbaxaT,2=2elbaxaT,1=1elbaxaT

7=4&1elbaxaT,6=3&1elbaxaT,5=2&1elbaxaT0=elbaxatnoN,8=elbaxatllA

tnacifingiSrebmun

.edirrevolaunamwollA a 0=seY2=oN :

)b+a(D

7elbaxatllA b 4=seY0=oN

.>TS/IS<retfanoitarepoyekwollA0=seY1=oN

:D

6

:gnidnuoR2=pudnuor,1=ffotuc,0=ffodnuoR

tnacifingiSrebmun

:D

5

.>latotbuS<retfanoitarepoyekwollA a 0=seY1=oN :

)b+a(D

4.noitartsigermetiretfanoitarepoyekwollA b 0=seY4=oN

"0"syawlA ;D

3

:sutatsnoissimmoC0=enoN,2=2noissimmoC,1=1noissimmoC

tnacifingiSrebmun

:D

2

"0"syawlA ;D

1

Page 123: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

123QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)9~0(stpiecertsopforebmunmumixaM).tpiecertsop1snaem"0"(

tnacifingiSrebmun

:D

21

"0"syawlA ;;;;D

11D

01D

9D

8

:tpiecertseugdnatpiecertsopfomroF1 ,tuotnirP 2 yalpsiD

a 1 0=2 2= :

)b+a(D

7.tpiecertseugnoemittnerructnirP b 4=seY0=oN

.kcehcdezilanifraelC1=oN0=seY

:D

6

.noitcasnart/noitazilaitinikrelcehtretfatpiecertsopatuotnirP2=oN0=seY

:D

5

"0"syawlA ;;D

4D

3

:)01~00(egassemmottobtseugforebmuneniL).egassemmottobonsnaem"00"(

tnacifingiSrebmun

::D

2D

1

4-3-7-15 Worksheet for receipt

noitpircseD eciohC margorPedoc

sanoitartsigerddanonretfaegnahckrelcroegnahcedomwollA.noitcasnarttsrif

1=seY0=oN

:D

7

:)99~00(rebmundrocerretcarahcredrO).gnittesonsnaem"00"(

tnacifingiSrebmun

::D

6D

5

rolocgnitnirpredrO1=deR0=kcalB

:D

4

.1#retnirpredrOottuotnirP a 1=seY0=oN

:)c+b+a(

D3

.2#retnirpredrOottuotnirP b 2=seY0=oN

.3#retnirpredrOottuotnirP c 4=seY0=oN

.4#retnirpredrOottuotnirP a 1=seY0=oN

:)c+b+a(

D2

.5#retnirpredrOottuotnirP b 2=seY0=oN

.6#retnirpredrOottuotnirP c 4=seY0=oN

.7#retnirpredrOottuotnirP1=seY0=oN

:D

1

4-3-7-16 Worksheet for non-add, non-add/NS

Page 124: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

124

Program 3

4-3-7-17 Worksheet for customer

4-3-7-18 Worksheet for arrangement

noitpircseD eciohC margorPedoc

:dohtemtupnI,1=tnemecalpertibihorP,0=tnemecalperwollA

2=eulavretneddA

tnacifingiSrebmun

:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

.edomGERninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D21

.edomFERninoitarepoelbanE b 0=seY2=oN

.edom–GERninoitarepoelbanE c 0=seY4=oN

.edom1MGPninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D11

.edom2MGPninoitarepoelbanE b 0=seY2=oN

.edom3MGPninoitarepoelbanE c 0=seY4=oN

.edom4MGPninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D01

.edom5MGPninoitarepoelbanE b 0=seY2=oN

.edom6MGPninoitarepoelbanE c 0=seY4=oN

.edom7MGPninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D9

edomtroprIninoitarepoelbanE b 0=seY2=oN

.edomMGPotuAninoitarepoelbanE c 0=seY4=oN

.edomZ/XninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D8

.edomreganaMninoitarepoelbanE b 0=seY2=oN

.edomnoitadilosnoC/noitcelloCninoitarepoelbanE c 0=seY4=oN

rebmuneliftnemegnarrAtnacifingiS

srebmun:::

D7

D6

D5

rebmunelbattnemegnarrAtnacifingiS

srebmun::::

D4

D3

D2

D1

Page 125: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

125QT-2000 Programming Manual

4-3-7-19 Worksheet for currency exchage

noitpircseD eciohC margorPedoc

)4~1,0(.lobmystnuomaenifeD).lobmysycnerruclacolsnaem"0"(

tnacifingiSrebmun

:D

7

)3~1,0(.rezilatotycnerrucngierofenifeD).rezilatotonsnaem"0"(

tnacifingiSrebmun

:D

6

:gnidnuoR2=pudnuor,1=ffotuc,0=ffodnuoR

tnacifingiSrebmun

:D

5

"0"syawlA ;D

4

:)2~0(edomyratenoM00º ,2= 0º ,1= 0 0=

tnacifingiSrebmun

:D

3

lamicedroflobmysyratenoM a 0=lamiceD1=ammoC :

)b+a(D

2rotarapesroflobmysyratenoM b 0=ammoC4=lamiceD

)2~0(rebmunrewardgningissA).1rewardsnaem"0"(

tnacifingiSrebmun

:D

1

noitpircseD eciohC margorPedoc

ehtfogninnigebehtmorfgnitnirphctabpilsecroF).noitcnuflarenegybdellortnoc,"oN"fI(.noitcasnart a 1=seY

0=oN :)b+a(

D7.pilsnoemittnerructnirP b 4=seY

0=oN

.kcehcdezilanifraelC1=oN0=seY

:D

6

"0"syawlA ;;;D

5D

4D

3

"0"syawlA ;;D

2D

1

4-3-7-20 Worksheet for slip

noitpircseD eciohC margorPedoc

)5~1,0(sutatselbaxaT).1elbaxatsnaem"0"(

tnacifingiSrebmun

:D

8

"0"syawlA ;;;;D

7D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

4-3-7-21 Worksheet for T/S, TAST

Page 126: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

126

Program 3

4-3-7-22 Worksheet for menu

4-3-7-23 Worksheet for open 2

noitpircseD eciohC margorPedoc

)8~1,0(.rebmunteehsunemgningissaenifeD).enoybenodengissaerasteehsunem,"0"tesuoyfI(

tnacifingiSrebmun

:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

"0"syawlA ;;;D

21D

11D

01

"0"syawlA ;;D

9D

8

.yroslupmocrebmunremotsucesaeleR a 0=seY1=oN

:)c+b+a(

D7

.yroslupmocrebmunelbatesaeleR b 0=seY2=oN

.yroslupmocrebmunkcehcesaeleR c 0=seY4=oN

ehtezilanifnacuoy",seY"fI(.rorreecnalabtidercesaeleR).evitagensilatotbusehtfinevenoitcasnart a 0=seY

1=oN :)b+a(

D6.yroslupmoctpiecertseugesaeleR b 0=seY

4=oN

.yroslupmocnoitadilavesaeleR a 0=seY1=oN

:)c+b+a(

D5

.yroslupmoctnemesrodnekcehcesaeleR b 0=seY2=oN

.yroslupmoctnirpkcehcesaeleR c 0=seY4=oN

.yroslupmoctnirphctablaunampilsesaeleR0=seY4=oN

:D

4

.yroslupmocnwodyatsesaeleR a 0=seY1=oN

:)c+b+a(

D3

.yroslupmoctnirpnehctikesaeleR b 0=seY2=oN

.yroslupmocrebmuntaesesaeleR c 0=seY4=oN

.yroslupmocnoitaralcedpitesaeleR a 0=seY1=oN :

)b+a(D

2.yroslupmoctuo-ekat/ni-taeesaeleR b 0=seY2=oN

"0"syawlA ;D

1

Page 127: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

127QT-2000 Programming Manual

4-3-7-24 Worksheet for clerk number

4-3-7-25 Worksheet for operator X/Z

4-3-7-26 Worksheet for subtotal, merchandise subtotal

noitpircseD eciohC margorPedoc

)metsysDCLlaudylnoevitceffE(.DCLtegratenifeD0=noitinifedoN,2=DCLthgiR,1=DCLtfeL

tnacifingiSrebmun

:D

21

"0"syawlA ;;;;D

11D

01D

9D

8

"0"syawlA ;;;D

7D

6D

5

)9999~0000(rebmunterceskrelC).rebmuntercesonsnaem"0000"(

tnacifingiSsrebmun

::::D

4D

3D

2D

1

noitpircseD eciohC margorPedoc

.troperenola-dnatseussI/.tropernoitadilosnoceussI a 1=noitadilosnoC0=enola-dnatS :

)b+a(D

7.tropertnirP/.troperyalpsiD b 2=yalpsiD0=tnirP

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

noitadilavelpitluM).elbissopsignitnirpnoitadilavenoylno,"oN"fI(

0=seY4=oN

:D

11

"0"syawlA ;;;D

01D

9D

8

"0"syawlA ;;D

7D

6

)ylnoTS(.tnuomaxatno-ddaedulcnI a 0=seY2=oN :

)b+a(D

5.desserpsiyeknehwtnirP b 4=seY0=oN

"0"syawlA ;;;;D

4D

3D

2D

1

Page 128: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

128

Program 3

4-3-7-28 Worksheet for multiplication, quantity/for, square, cube, Ketten Bon

noitpircseD eciohC margorPedoc

)ylno>X<dnanoBnetteK(:erudecorpnoitacilpitluM1 ytitnauQ × ,tnuomA 2 tnuomA × ytitnauQ

1 0=2 1=

:D

6

:gnidnuoR2=pudnuor,1=ffotuc,0=ffodnuoR

tnacifingiSrebmun

:D

5

"0"syawlA ;;;;D

4D

3D

2D

1

4-3-7-30 Worksheet for open check

noitpircseD eciohC margorPedoc

tropertnirP/.troperyalpsiD2=yalpsiD

0=tnirP:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

.puorgunemnwodllupgniknilfo.oNdroceRtnacifingiS

srebmun::

D2

D1

4-3-7-29 Worksheet for selective item subtotal (future )

noitpircseD eciohC margorPedoc

:)2,1,0(sutatsmetievitceleS2=2metievitceles,1/0=1metievitceleS

tnacifingiSrebmun

:D

11

"0"syawlA ;;;;D

01D

9D

8D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

4-3-7-31 Worksheet for list

noitpircseD eciohC margorPedoc

"0"syawlA ; ~;D

21D

2

:noitallecnacfoegnarA1 /noitallecnacetelpmoC 2 ylnotpiecertnerruC

a 2 0=1 1= :

)b+a(D

1.deretsigersitielihwknilnwodllup/unemtestcerroC b 0=oN2=seY

4-3-7-27 Worksheet for cancel

Page 129: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

129QT-2000 Programming Manual

4-3-7-32 Worksheet for tax exempt

noitpircseD eciohC margorPedoc

:eropagniS,.S.U1xattpmexE a 1=oN

0=seY

:)c+b+a(

D8

2xattpmexE b 2=oN0=seY

3xattpmexE c 4=oN0=seY

:adanaC0=)4~1xat(llatpmexE

,3=3xattpmexE,2=2xattpmexE,1=1xattpmexE,5=2&1xattpmexE,4=4xattpmexE

7=4&1xattpmexE,6=3&1xattpmexE

tnacifingiSrebmun

"0"syawlA ;;;;D

7D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

4-3-7-33 Worksheet for clock-in/clock-out

noitpircseD eciohC margorPedoc

"0"syawlA ;;;;D

21D

11D

01D

9

"0"syawlA ;;;;D

8D

7D

6D

5

"0"syawlA ;;D

4D

3

:sesufoesopropehT0=tuo-kcolcdnani-kcolchtobesU

1=ni-kcolcylnoesU2=tuo-kcolcylnoesU

tnacifingiSrebmun

:D

2

.desserperasyektuo-kcolcroni-kcolcnehwtnirP0=seY1=oN

:D

1

noitpircseD eciohC margorPedoc

"0"syawlA ;;;;D

21D

11D

01D

9

"0"syawlA ;;;;D

8D

7D

6D

5

"0"syawlA ;;D

4D

3

:sesufoesopropehT0=tuo-kaerbdnani-kaerbhtobesU

1=ni-kaerbylnoesU2=tuo-kaerbylnoesU

tnacifingiSrebmun

:D

2

"0"syawlA :D

1

4-3-7-34 Worksheet for break-in/break-out

Page 130: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

130

Program 3

noitpircseD eciohC margorPedoc

"0"syawlA ;;;;D

21D

11D

01D

9

:eropagniS,.S.U1xattpmexE a 1=oN

0=seY

:)c+b+a(

D8

2xattpmexE b 2=oN0=seY

3xattpmexE c 4=oN0=seY

:adanaC0=)4~1xat(llatpmexE

,3=3xattpmexE,2=2xattpmexE,1=1xattpmexE,5=2&1xattpmexE,4=4xattpmexE

7=4&1xattpmexE,6=3&1xattpmexE

tnacifingiSrebmun

"0"syawlA ;;D

7D

6

.desserpsiyekehtnehwtnirP0=tnirptoN

1=tnirP:D

5

"0"syawlA ;;;;D

4D

3D

2D

1

noitpircseD eciohC margorPedoc

"0"syawlA ;;;D

21D

11D

01

"0"syawlA ;;;D

9D

8D

7

)tnirP(ECIOVNIro)tnirPtoN(LACSIFTAV0=tnirPtoN

1=tnirP:D

6

"0"syawlA ;;;D

5D

4D

3

"0"syawlA ;;D

2D

1

4-3-7-35 Worksheet for eat-in/take-out

4-3-7-36 Worksheet for store

Page 131: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

131QT-2000 Programming Manual

5. Program 2 ................................................................................... 1325-1. Character programming ............................................................................. 132

5-1-1 Character programming keyboard .................................................................. 1325-1-2 Inputting characters by code ........................................................................... 1345-1-3 After completing to input characters ............................................................... 134

5-2. Programming item descriptors ................................................................... 1355-2-1 Programming PLU item descriptors ................................................................ 1355-2-2 Programming PLU 2nd unit price descriptors ................................................. 1365-2-3 Programming Subdepartment descriptors ...................................................... 1365-2-4 Programming Department descriptors ............................................................ 1375-2-5 Programming PLU/subdepartment/department descriptors by range............. 1385-2-6 Copying PLU descriptors to PLU 2nd unit price.............................................. 1395-2-7 Programming function key descriptors............................................................ 140

5-3. Programming characters and messages ................................................... 1415-3-1 Programming receipt message, slip message and guest receipt message .... 1415-3-2 Programming text recall message .................................................................. 1425-3-3 Programming order character link................................................................... 1425-3-4 Programming fixed totalizer descriptors.......................................................... 1435-3-5 Programming text recall message .................................................................. 1445-3-6 Programming special characters .................................................................... 1445-3-7 Programming report headers .......................................................................... 1465-3-8 Programming endorsement message ............................................................. 1475-3-9 Programming GT character ............................................................................ 147

Page 132: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

132

Program 2

5. Program 2

5-1. Character programming

There are two methods you can use to input characters: using a character programmingkeyboard (menu sheet) for direct input, or using character codes to specify the characters.

5-1-1 Character programming keyboard

When you enter the Program 2 mode, the keyboard becomes a character programmingkeyboard (shown below).

Â

Á

À

Ä

1

Q

A

Z

â

á

à

ä

!

q

a

z

Ô

Ó

Ò

Ö

2

W

S

X

ô

ó

ò

ö

@

w

s

x

Û

Ú

Ù

Ü

3

E

D

C

û

ú

ù

ü

#

e

d

c

Î

Í

Ì

Ï

4

R

F

V

Ê

É

È

Ë

5

T

G

B

ê

é

è

ë

%

t

g

b

Ç

Å

Æ

Ñ

6

Y

H

N

ç

å

æ

ñ

^

y

h

n

Ã

Y

Õ

7

U

J

M

ã

y

õ

&

u

j

m

Ø

ı

<<

8

I

K

,

ø

ÿ

¢

*

i

k

<

£

ª

>>

9

O

L

.

¬

¤

(

o

l

>

º

0

P

;

/

'

)

p

:

?

ƒ

ß

-

[

'

\

_

_

{

"

¿

¡

±

=

]

`

+

}

~

¥

˜˜

SHIFT INS DEL DBL

ESC/SKIP

PAGEUP

PAGEDOWN

C

7

4

1

0

8

5

2

A

HOME

NO

YES

9

6

3

B

#-2

#-1

CAP

î

í

ì

ï

$

r

f

v

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

**

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

FOR ALL DEVICES

R/J ONLY

INSERT

DELETE

DOUBLE LETTER

CAPITAL LETTER

small letter

R J SLIP KP REAR

R J SLIP KP REAR

→ A_BAB_

→ABC AC_

INS

DEL

DBL

CAP

SHIFT

Aa

Aa

Aa

A

A

a

**

Page 133: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

133QT-2000 Programming Manual

Character programming keyboard (Menu sheet)The character programming keyboard has an upper case “CAP” setting and a “SHIFT”setting. Its initial setting is CAP setting, which remains in effect until you press the<SHIFT> key.After you press <SHIFT>, the shift setting remains in effect until you press the uppercase<CAP> key again. Note that neither the <SHIFT> nor <CAP> key operation is counted asa character during programming.Press the <DBL> key to specify that the next character you input is a double-size character.Each double-size character counts as two normal size characters.Press the <INS> at the insertion point to insert a character, or press the <DEL> key at thedeletion point to delete a character. The <DEL> key acts as a back space key.The <Left Arrow> and <Right Arrow> key moves the insertion/deletion point.

a aA

a → or a→ A

A

A

A → A or a a→

→PLU0001 PLU0001

PLU0001 LU0001Q

q

<Shift>

<Cap>

<DBL>

<INS>

<DEL> →

→PLU0001 QLU0001

icon (it shows a sort of the character input)

1 A

No. Descriptor 1 PLU0001 2 PLU0002 3 PLU0003 4 PLU0004 5 PLU0005 6 PLU0006 7 PLU0007 8 PLU0008 9 PLU0009 10 PLU0010 11 PLU0011 v

PLU0001 0.00

Page 134: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

134

Program 2

5-1-2 Inputting characters by code

You can also program text by inputting codes that correspond to the characters you wantto input. A list of character codes is given in the table below.You must also use the <B> key on the 10-key pad during character code programming tofix character codes for the last input character.

Character code table

5-1-3 After completing to input characters

After completion of inputting characters (by both character keyboard and charactercodes), it is necessary to press the <A> key when you assign these characters to a key.

arahC edoC arahC edoC arahC edoC arahC edoC arahC edoC arahC edoC arahC edoC

ecapS 23 0 84 @ 46 P 08 ‘ 69 p 211 Ç 821

! 33 1 94 A 56 Q 18 a 79 q 311 ü 921

” 43 2 05 B 66 R 28 b 89 r 411 é 031

# 53 3 15 C 76 S 38 c 99 s 511 â 131

$ 63 4 25 D 86 T 48 d 001 t 611 ä 231

% 73 5 35 E 96 U 58 e 101 u 711 à 331

& 83 6 45 F 07 V 68 f 201 v 811 å 431

’ 93 7 55 G 17 W 78 g 301 w 911 ç 531

( 04 8 65 H 27 X 88 h 401 x 021 ê 631

) 14 9 75 I 37 Y 98 i 501 y 121 ë 731

* 24 : 85 J 47 Z 09 j 601 z 221 è 831

+ 34 ; 95 K 57 [ 19 k 701 { 321 î 931

, 44 < 06 L 67 \ 29 l 801 | 421 ï 041

- 54 = 16 M 77 ] 39 m 901 } 521 ì 141

. 64 > 26 N 87 ^ 49 n 011 ~ 621 Ä 241

/ 74 ? 36 O 97 _ 59 o 111 721 Å 341

arahC edoC arahC edoC arahC edoC arahC edoC arahC edoC arahC edoC arahC edoC

É 441 á 061 I 671 291 ˜ 802 Ó 422 042

æ 541 í 161 II 771 391 º 902 ß 522 ± 142

Æ 641 ó 261 III 871 491 Ê 012 Ô 622 242

ô 741 ú 361 971 591 Ë 112 Ò 722 342

ö 841 ñ 461 081 691 È 212 õ 822 442

ò 941 Ñ 561 Á 181 791 ı 312 Õ 922 542

û 051 ª 661 Â 281 ã 891 Í 412 µ 032 642

ù 151 º 761 À 381 Ã 991 Î 512 132 742

ÿ 251 ¿ 861 481 002 Ï 612 232 842

Ö 351 961 581 102 712 Ú 332 942

Ü 451 071 681 202 812 Û 432 • 052

ø 551 2/1 171 781 302 912 Ù 532 152

£ 651 4/1 271 881 402 022 632 252

Ø 751 ¡ 371 ¢ 981 502 122 732 352

× 851 « 471 ¥ 091 602 Ì 222 832 452

ƒ 951 » 571 191 ¤ 702 322 ` 932 elbuoDezis 552

´´

←→↑↓

Page 135: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

135QT-2000 Programming Manual

5-2. Programming item descriptors

Preparation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> repeatedly to assign Program 2 mode.

3. Select “1.Item Descriptor” and press the <YES> key.

5-2-1 Programming PLU item descriptors

Operation

4. Select “1.PLU” and press the <YES> key.

5. Select the PLU directly, by entering record No. or by enteringrandom code and press the <YES> key.

6. After pressing the <YES> key again, the original descriptorsare shown in the lower column of the display. Then entercharacters and press the <YES> key to fix them.

7. Press the <ESC> key to return to the previous menu.

0.00

P2 C01 15-12-97 12:34 000000

PGM2 1.Item Descriptor 2.Char & Message

0.00

Item Descriptor

Item Descriptor 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.PLU -> 2nd@ Copy 7.CHR & Press Key

0.00

Item Descriptor

PLU 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

No. Descriptor 1 PLU0001 2 PLU0002 3 PLU0003 4 PLU0004 5 PLU0005 6 PLU0006 7 PLU0007 8 PLU0008 9 PLU0009 10 PLU0010 11 PLU0011 vPLU0001

Page 136: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

136

Program 2

5-2-2 Programming PLU 2nd unit price descriptors

Operation

4. Select “2.PLU 2nd@” and press the <YES> key.

5. Select the PLU directly, by entering record No. or by enteringrandom code and press the <YES> key.

6. After pressing the <YES> key again, the original descriptorsare shown in the lower column of the display. Then entercharacters (Maximum 24 characters) and press the <YES>key to fix them.

7. Press the <ESC> key to return to the previous menu.

5-2-3 Programming Subdepartment descriptors

Operation

4. Select “3.Sub-Department” and press the <YES> key.

No. Descriptor 1 PLU0001 2 PLU0002 3 PLU0003 4 PLU0004 5 PLU0005 6 PLU0006 7 PLU0007 8 PLU0008 9 PLU0009 10 PLU0010 11 PLU0011 vPLU0001

0.00

Item Descriptor

Item Descriptor 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.PLU -> 2nd@ Copy 7.CHR & Press Key

0.00

Item Descriptor

Item Descriptor 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.PLU -> 2nd@ Copy 7.CHR & Press Key

0.00

Item Descriptor

PLU 2nd@ 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

Page 137: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

137QT-2000 Programming Manual

5. Select the <Subdepartment> directly by entering record No.or by entering subdepartment No. and press the <YES> key.

6. After pressing the <YES> key again, the original descriptorsare shown in the lower column of the display. Then entercharacters and press the <YES> key to fix them.

7. Press the <ESC> key to return to the previous menu.

5-2-4 Programming Department descriptors

Operation

4. Select “4.Department” and press the <YES> key.

5. Select the <Department> directly, by entering record No. orby entering department No. and press the <YES> key.

0.00

Item Descriptor

Sub-Department 1.SUBDEPT01 2.SUBDEPT02 3.SUBDEPT03 4.SUBDEPT04

No. Descriptor 1 SUBDEPT01 2 SUBDEPT02 3 SUBDEPT03 4 SUBDEPT04

SUBDEPT01

0.00

Item Descriptor

Item Descriptor 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.PLU -> 2nd@ Copy 7.CHR & Press Key

0.00

Item Descriptor

Department 1.DEPT01 2.DEPT02 3.DEPT03 4.DEPT04

Page 138: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

138

Program 2

6. After pressing the <YES> key again, the original descriptorsare shown in the lower column of the display. Then entercharacters and press the <YES> key to fix them.

7. Press the <ESC> key to return to the previous menu.

5-2-5 Programming PLU/subdepartment/department descriptors by range

Operation

4. Select “5.Range” and press the <YES> key.

5. Select the subject you want to modify, “PLU/PLU 2nd@/Sub-Department/Department” and press the <YES> key.

6. After pressing the <YES> key again, the original descriptorsare shown in the lower column of the display. Then entercharacters and press the <YES> key to fix them.

7. After pressing the <YES> key, enter characters and press the<YES> key.

No. Descriptor 1 DEPT01 2 DEPT02 3 DEPT03 4 DEPT04

DEPT01

0.00

Item Descriptor

Item Descriptor 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.PLU -> 2nd@ Copy 7.CHR & Press Key

0.00

Item Descriptor

Descriptor PLU0123 1.DEPT001 Enter Start range 0 End range 0

OK? YES

0.00

Item Descriptor

Range 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department

Page 139: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

139QT-2000 Programming Manual

8. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

9. Press the <YES> key.10. Press the <ESC> key to return to the previous menu.

5-2-6 Copying PLU descriptors to PLU 2nd unit price

Operation

4. Select “6.PLU –> 2nd@ Copy” and press the <YES> key.

5. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

0.00

Item Descriptor

Descriptor PLU0123 1.DEPT001 Enter Start range 123 End range 999

OK? YES

0.00

Item Descriptor

Descriptor PLU0123 1.DEPT001 Enter Start range 123 End range 0000

OK? YES

0.00

Item Descriptor

Item Descriptor 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.PLU -> 2nd@ Copy 7.CHR & Press Key

0.00

Item Descriptor

PLU -> 2nd@ Copy 1.DEPT001 Enter Start range 123 End range 0

OK? YES

Page 140: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

140

Program 2

6. Press the <YES> key.7. Press the <ESC> key to return to the previous menu.

5-2-7 Programming function key descriptors

Operation

4. Select “7.CHR & Press Key” and press the <YES> key.

5. a) Function keys (Maximum 24 characters)Enter characters, press the <YES> key to fix them and pressthe corresponding key.b) PLUEnter the PLU No., press the <PLU#> key, enter charactersand press the <YES> key.c) PLU 2nd @Enter characters and press the <2nd@> key and correspond-ing key.

6. Press the <ESC> key to return to the previous menu.

0.00

Item Descriptor

Item Descriptor 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Range 6.PLU -> 2nd@ Copy 7.CHR & Press Key

0.00

Item Descriptor Item DescriptorCASH 0040-002 178-001RECEIVED ON ACCOUNT 0042-002 164-020

0.00

Item Descriptor

PLU -> 2nd@ Copy 1.DEPT001 Enter Start range 123 End range 999

OK? YES

Page 141: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

141QT-2000 Programming Manual

5-3. Programming characters and messages

Preparation:

1. Sign on a clerk (if necessry).2. Press <PGM MODE> repeatedly to assign Program 2 mode.

3. Select “2.Char & Message” and press the <YES> key.

5-3-1 Programming receipt message, slip message and guest receipt message

Operation

4. Select “1.Receipt/SLIP Message” and press the <YES> key.

5. Select the appropriate record, press the <YES> key, entercharacters (Maximum 40 characters) and press the <YES>key.

6. Press the <ESC> key to return to the previous menu.

0.00

P2 C01 15-12-97 12:34 000000

PGM2 1.Item Descriptor 2.Char & Message

0.00

Char & Message

Char & Message 1.Receipt/SLIP Msg 2.Text Recall 3.Order Char Link 4.Fixed Totalizer 5.Group Character 6.Special Character 7.Report Header 8.Endorse Message v

0.00

Receipt/SLIP Msg0001-032 (Receipt Logo) YOUR RECEIPT0002-032 (Receipt Logo) THANK YOU0003-032 (Receipt Logo) CALL AGAIN

.oNceR egasseM4~1 egassemogoltpieceR8~5 egassemlaicremmoctpieceR21~9 egassemmottobtpieceR61~31 egassempotlliB02~71 egassemypoclliB42~12 egassemmottoblliB82~52 egassemogolpilS23~92 egassemetaidemretnipilS63~33 egassemmottobpilS

73 desutoN74~83 egassemmottobtseuG

Page 142: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

142

Program 2

5-3-2 Programming text recall message

Operation

4. Select “2.Text Recall” and press the <YES> key.

5. Select the appropriate record, press the <YES> key, entercharacters (Maximum 40 characters) and press the <YES>key.

6. Press the <ESC> key to return to the previous menu.

5-3-3 Programming order character link

Operation

4. Select “3.Order Char Link” and press the <YES> key.

5. Select the appropriate record, press the <YES> key, entercharacters (Maximum 16 characters) and press the <YES>key.

6. Press the <ESC> key to return to the previous menu.

0.00

Char & Message

Char & Message 1.Receipt/SLIP Msg 2.Text Recall 3.Order Char Link 4.Fixed Totalizer 5.Group Character 6.Special Character 7.Report Header 8.Endorse Message v

0.00

Text Recall0001-039********* Text Recall 1st line ********0002-039********* Text Recall 2nd line ********0003-039********* Text Recall 3rd line ********0004-039********* Text Recall 4th line ********0005-039********* Text Recall 5th line ********0006-039 v

0.00

Char & Message

Char & Message 1.Receipt/SLIP Msg 2.Text Recall 3.Order Char Link 4.Fixed Totalizer 5.Group Character 6.Special Character 7.Report Header 8.Endorse Message v

0.00

Order Char Link0001-065Order Character 10002-065Order Character 20003-065Order Character 30004-065Order Character 40005-065Order Character 50006-065 v

Page 143: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

143QT-2000 Programming Manual

5-3-4 Programming fixed totalizer descriptors

Operation

4. Select “4.Fixed Totalizer” and press the <YES> key.

5. Select the appropriate record, press the <YES> key, entercharacters (Maximum 16 characters) and press the <YES>key.

6. Press the <ESC> key to return to the previous menu.

.oNceR rotpircseD .oNceR rotpircseD100 latotselasssorG 130 1rewardnihsacycnerrucngieroF200 latotselasteN 230 1rewardnikcehcycnerrucngieroF300 rewardnihsaC 330 2rewardnihsacycnerrucngieroF400 tnuomaderalcedhsaC 430 2rewardnikcehcycnerrucngieroF500 tnuomahsactrohsderalceD 530 3rewardnihsacycnerrucngieroF600 tnuomahsacrevoderalceD 630 3rewardnikcehcycnerrucngieroF700 rewardniegrahC 730 noitcudeR800 tnuomaderalcedegrahC 830 nrutermetI900 tnuomaegrahctrohsderalceD 930 retnuocraelC010 tnuomaegrahcrevoderalceD 040 desutoN110 rewardnikcehC 140 gnidnuoR210 tnuomaderalcedkcehC 240 desutoN310 tnuomakcehctrohsderalceD 340 desutoN410 tnuomakcehcrevoderalceD 440 desutoN510 rewardnitiderC 540 1tnuomaelbaxaT610 tnuomaderalcedtiderC 640 1xaT710 tnuomatiderctrohsderalceD 740 desutoN810 tnuomatidercrevoderalceD 840 2tnuomaelbaxaT910 desutoN 940 2xaT020 desutoN 050 desutoN120 desutoN 150 3tnuomaelbaxaT220 desutoN 250 3xaT320 latotedomdnufeR 350 desutoN420 tnuocremotsuC 450 4tnuomaelbaxaT520 remotsucrepselasegarevA 550 4xaT620 eefecivresgnihsackcehC 650 desutoN720 eefecnalaBweN 750 5tnuomaelbaxaT820 desutoN 850 5xaT920 latot1noissimmockrelC 950 desutoN030 latot2noissimmockrelC

0.00

Char & Message

Char & Message 1.Receipt/SLIP Msg 2.Text Recall 3.Order Char Link 4.Fixed Totalizer 5.Group Character 6.Special Character 7.Report Header 8.Endorse Message v

0.00

Fixed Totalizer0001-001GROSS0002-001NET0003-001CAID0004-001CATL0005-001CA-0006-001 v

Page 144: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

144

Program 2

5-3-5 Programming text recall message

Operation

4. Select “5.Group Character” and press the <YES> key.

5. Select the appropriate record, press the <YES> key, entercharacters (Maximum 16 characters) and press the <YES>key.

6. Press the <ESC> key to return to the previous menu.

5-3-6 Programming special characters

Operation

4. Select “5.Special Character” and press the <YES> key.

5. Select the appropriate record, press the <YES> key, entercharacters and press the <YES> key.

6. Press the <ESC> key to return to the previous menu.

0.00

Char & Message

Char & Message 1.Receipt/SLIP Msg 2.Text Recall 3.Order Char Link 4.Fixed Totalizer 5.Group Character 6.Special Character 7.Report Header 8.Endorse Message v

0.00

Group Character0001-006GROUP010002-006GROUP020003-006GROUP030004-006GROUP040005-006GROUP050006-006 v

0.00

Char & Message

Char & Message 1.Receipt/SLIP Msg 2.Text Recall 3.Order Char Link 4.Fixed Totalizer 5.Group Character 6.Special Character 7.Report Header 8.Endorse Message v

0.00

Special Character0001-023 • @No / *0002-023NoCT0003-023 BUSY0004-023T1 T2 T3 T4 T50005-023T12T13T14 T230006-023 v

Page 145: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

145QT-2000 Programming Manual

Rec. No.

001

002

003

004005006007008009010011012013014015016017018019020021022023024025026027028029030031032033034035036037038039040041042043

Contents DescriptorAmount symbol (2), @(2), No (2), split pricing (1),Training filler (1)No. of item sold (2), Customer count (2)Multiplication (6)Recalling for a check (6)Taxable symbol 1 (3 e.a.)Taxable symbol 2 (3 e.a.)Taxable symbol 3 (3 e.a.)Foreign currency (2)/Selective item symbol (3)Mode symbol 1 (4) (4 e.a.)Mode symbol 2 (4) (4 e.a.)Mode symbol 3 (4) (4 e.a.)Decimal: amount/q'ty, Delimiter (1 e.a.)A.M., P.M. (3 e.a.)Slip continued (12), page (2)Online password (8)Display subtotal symbol (ST key) (16)Subtotal symbol (16)Total symbol (16)Change symbol (16)Check cashing fee (16)Check cashing amount (16)Bon message (16)Not usedCheck No. (12)Service total (16)Item discount total (16)Not usedSeat No. (16)Total symbol (X/Z report) (16)Clock-in symbol (16)Clock-out symbol (16)Break-in symbol (16)Break-out symbol (16)Job code symbol (16)Work time symbol (16)Break time symbol (16)Tip declaration symbol (16)Regular work hours (Employee report) (16)Overtime work hours (Employee report) (16)Employee report (1) (4 e.a.)Employee report (2) (4 e.a.)Hourly labor pay (16)Hourly labor proceeds (16)Pay per transaction (16)

• @No / * $ @No / * NoCTX X BUSY BUSY T1 T2 T3 T4 T5T12T13T14 T23 T1 * * * * • REG RFR-MGRPn†X/ZPGM TRG.., AM PMCONTINUED P STSTTLCG-CACG ** STUB **

CHECK No.SRVC TLDISCOUNT

SEAT#TLCLOCK-INCLOCK-OUTBREAK-INBREAK-OUTJOBWORK TIMEBREAK TIMECASH TIPREGULAR TIMEOVER TIMEIN OUT BRK JOB#TIP WORKCOSTNET SALES/HOURCOST/TRANSACTION

OthersU.S.

OthersU.S.

† n: Program mode number (1 ~ 7)

Page 146: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

146

Program 2

0.00

Char & Message

Char & Message 1.Receipt/SLIP Msg 2.Text Recall 3.Order Char Link 4.Fixed Totalizer 5.Group Character 6.Special Character 7.Report Header 8.Endorse Message v

0.00

Report Header0001-024FIXED TTL0002-024TRANSACTION0003-024SUBDEPT0004-024PLU0005-024DEPT0006-024 v

.oN.ceR stnetnoC rotpircseD100 troperrezilatotdexiF LTTDEXIF200 troperyeknoitcasnarT NOITCNUFEERF300 tropertnemtrapedbuS TPEDBUS400 troperULP ULP500 tropertnemtrapeD TPED600 troperpuorG PUORG700 troperkrelc/reihsaC KRELC/REIHSAC800 desutoN900 troperselasylruoH YLRUOH010 troperselasylhtnoM YLHTNOM110 troper)laicnaniF(hsalF HSALF210 troperkcehcnepO KHCNEPO310 tropersisylanaelbaT SISYLANAELBAT410 troperkcotsULP KCOTSULP510 troperlasuacdioV NOSAERDIOV610 troperyromemlanruoJ YROMEM-J710 ecnadnettA&emiT EEYOLPME810 robalylruoH ROBALYLRUOH910 metiylruoH TCUDORPYLRUOH

5-3-7 Programming report headers

Operation

4. Select “6.Report Header” and press the <YES> key.

5. Select the appropriate record, press the <YES> key, entercharacters (Maximum 16 characters) and press the <YES>key.

6. Press the <ESC> key to return to the previous menu.

Page 147: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

147QT-2000 Programming Manual

0.00

Char & Message

Char & Message 1.Receipt/SLIP Msg 2.Text Recall 3.Order Char Link 4.Fixed Totalizer 5.Group Character 6.Special Character 7.Report Header 8.Endorse Message v

0.00

Endorse Message0001-033****** Endorse Message 1st line *******0002-033****** Endorse Message 2nd line *******0003-033****** Endorse Message 3rd line *******0004-033****** Endorse Message 4th line *******

0.00

Char & Message

Char & Message 2.Text Recall ^ 3.Order Char Link 4.Fixed Totalizer 5.Group Character 6.Special Character 7.Report Header 8.Endorse Message 9.GT Character

0.00

GT Character0001-020GT10002-020GT20003-020GT3

5-3-8 Programming endorsement message

Operation

4. Select “8.Endorse Message” and press the <YES> key.

5. Select the appropriate record, press the <YES> key, entercharacters (Maximum 40 characters) and press the <YES>key.

6. Press the <ESC> key to return to the previous menu.

5-3-9 Programming GT character

Operation

4. Select “9.GT Character” and press the <YES> key.

5. Select the appropriate record, press the <YES> key, entercharacters (Maximum 16 characters) and press the <YES>key.

6. Press the <ESC> key to return to the previous menu.

Page 148: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

148

Program 2

Page 149: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

149QT-2000 Programming Manual

6. Program 1 ................................................................................... 1506-1. Presetting date and time ............................................................................ 1506-2. Programming unit price and rate ................................................................ 151

6-2-1 Programming PLU unit price .............................................................................. 1516-2-2 Programming PLU 2nd unit price ....................................................................... 1526-2-3 Programming PLU unit price and PLU 2nd unit price ......................................... 1536-2-4 Programming subdepartment unit price ............................................................. 1546-2-5 Programming department unit price ................................................................... 1546-2-6 Programming PLU/PLU 2nd@/subdepartment/department unit price by range 1556-2-7 Copying PLU unit price to PLU 2nd unit price .................................................... 1576-2-8 Programming amount or rate to keys ................................................................. 158

Page 150: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

150

Program 1

6. Program 1

6-1. Presetting date and time

Preparation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> repeatedly to assign Program 1 mode.

Presetting time

3. Enter the current time in four (hour, minute) digits or in five(hour, minute, ten second) and press the <YES> key (24-hoursystem).

Presetting date:

3. Enter the current date in six digits (year, month, day order)and press the <YES> key.

0.00

P1 C01 15-12-97 12:34 000000

PGM1 1.Unit Price/Qty

0.00

P1 C01 15-12-97 12:34 000000

PGM1 1.Unit Price/Qty

15-12-96 12:34 00

0.00

P1 C01 15-12-97 12:34 000000

PGM1 1.Unit Price/Qty

15-12-96 12:34 00

Page 151: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

151QT-2000 Programming Manual

6-2. Programming unit price and rate

Preparation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> repeatedly to assign Program 1 mode.

3. Select “1.Unit Price/Qty” and press the <YES> key.

6-2-1 Programming PLU unit price

Operation

4. Select “1.PLU” and press the <YES> key.

5. Select the PLU directly by entering record No. or by enteringrandom code and press the <YES> key.

6. Enter unit price and press the <YES> key to fix them.Pressing <YES> twice programs the same unit price to thenext record.

7. Press the <ESC> key to return to the previous menu.

0.00

P1 C01 15-12-97 12:34 000000

PGM1 1.Unit Price/Qty

0.00

Unit Price/Qty

Unit Price/Qty 1.PLU 2.PLU 2nd@ 3.PLU & PLU 2nd@ 4.Sub-Department 5.Department 6.Range 7.PLU -> 2nd@ Copy 8.AMT / Rate to Key

0.00

No. Descriptor Price 1 PLU0001 @10.00 2 PLU0002 @20.00 3 PLU0003 @30.00 4 PLU0004 @40.00 5 PLU0005 @50.00 6 PLU0006 @60.00 7 PLU0007 @70.00 8 PLU0008 @80.00 9 PLU0009 @90.00 10 PLU0010 @100.00 11 PLU0011 @110.00v

0.00

Unit Price/Qty

PLU 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

Page 152: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

152

Program 1

6-2-2 Programming PLU 2nd unit price

Operation

4. Select “2.PLU 2nd@” and press the <YES> key.

5. Select the PLU directly by entering record No. or by enteringrandom code and press the <YES> key.

6. Select “Size” or “Price” field by the cursor keys and enter unitprice and press the <YES> key to fix them.Pressing <YES> twice programs the same unit price to thenext record.

7. Press the <ESC> key to return to the previous menu.

0.00

No. Descriptor Qty Price 1 PLU0001 26.52 @10.00 2 PLU0002 0.00 @20.00 3 PLU0003 0.50 @30.00 4 PLU0004 1.75 @40.00 5 PLU0005 2.80 @50.00 6 PLU0006 0.00 @60.00 7 PLU0007 0.00 @70.00 8 PLU0008 0.00 @80.00 9 PLU0009 0.00 @90.00 10 PLU0010 0.00 @100.00 11 PLU0011 0.00 @110.00v

0.00

Unit Price/Qty

Unit Price/Qty 1.PLU 2.PLU 2nd@ 3.PLU & PLU 2nd@ 4.Sub-Department 5.Department 6.Range 7.PLU -> 2nd@ Copy 8.AMT / Rate to Key

0.00

Unit Price/Qty

PLU 2nd@ 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

0.00

No. Descriptor Qty Price 1 PLU0001 26.52 @10.00 2 PLU0002 0.00 @20.00 3 PLU0003 0.50 @30.00 4 PLU0004 1.75 @40.00 5 PLU0005 2.80 @50.00 6 PLU0006 0.00 @60.00 7 PLU0007 0.00 @70.00 8 PLU0008 0.00 @80.00 9 PLU0009 0.00 @90.00 10 PLU0010 0.00 @100.00 11 PLU0011 0.00 @110.00v

Page 153: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

153QT-2000 Programming Manual

6-2-3 Programming PLU unit price and PLU 2nd unit price

Operation

4. Select “3.PLU & PLU 2nd@” and press the <YES> key.

5. Select the PLU directly, by entering record No. or by enteringrandom code and press the <YES> key.

6. Select “Qty” or “Price” field by the cursor keys and enter theunit price and press the <YES> key to fix them.Pressing <YES> twice programs the same unit price to thenext record.

7. Press the <ESC> key to return to the previous menu.

0.00

Unit Price/Qty

PLU & PLU 2nd@ 1.PLU0001 2.PLU0002 3.PLU0003 4.PLU0004 5.PLU0005 6.PLU0006 7.PLU0007 8.PLU0008 v

0.00

Unit Price/Qty

Unit Price/Qty 1.PLU 2.PLU 2nd@ 3.PLU & PLU 2nd@ 4.Sub-Department 5.Department 6.Range 7.PLU -> 2nd@ Copy 8.AMT / Rate to Key

0.00

No. Descriptor Qty Price 1 PLU0001 @1,234.00 PLU0001 12.26 @1.00 2 PLU0002 @20.00 PLU0002 0.00 @2.00 3 PLU0003 @30.00 PLU0003 0.50 @3.00 4 PLU0004 @40.00 PLU0004 1.75 @4.00 5 PLU0005 @50.00 PLU0005 2.80 @5.00 6 PLU0006 @60.00v

0.00

No. Descriptor Qty Price 1 PLU0001 @1,234.00 PLU0001 12.26 @1.00 2 PLU0002 @20.00 PLU0002 0.00 @2.00 3 PLU0003 @30.00 PLU0003 0.50 @3.00 4 PLU0004 @40.00 PLU0004 1.75 @4.00 5 PLU0005 @50.00 PLU0005 2.80 @5.00 6 PLU0006 @60.00v

0.00

No. Descriptor Qty Price 1 PLU0001 @1,234.00 PLU0001 12.26 @1.00 2 PLU0002 @20.00 PLU0002 0.00 @2.00 3 PLU0003 @30.00 PLU0003 0.50 @3.00 4 PLU0004 @40.00 PLU0004 1.75 @4.00 5 PLU0005 @50.00 PLU0005 2.80 @5.00 6 PLU0006 @60.00v

Page 154: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

154

Program 1

6-2-4 Programming subdepartment unit price

Operation

4. Select “4.Sub-Department” and press the <YES> key.

5. Select the <subdepartment> directly or by entering recordNo. and press the <YES> key.

6. Enter the unit price and press the <YES> key to fix them.Pressing <YES> twice programs the same unit price to thenext record.

7. Press the <ESC> key to return to the previous menu.

6-2-5 Programming department unit price

Operation

4. Select “5.Department” and press the <YES> key.

0.00

Unit Price/Qty

Unit Price/Qty 1.PLU 2.PLU 2nd@ 3.PLU & PLU 2nd@ 4.Sub-Department 5.Department 6.Range 7.PLU -> 2nd@ Copy 7.AMT / Rate to Key

0.00

Unit Price/Qty

Sub-Department 1.SUBDEPT01 2.SUBDEPT02 3.SUBDEPT03 4.SUBDEPT04

0.00

No. Descriptor Price 1 SUBDEPT01 10.00 2 SUBDEPT02 20.00 3 SUBDEPT03 30.00 4 SUBDEPT04 40.00

0.00

Unit Price/Qty

Unit Price/Qty 1.PLU 2.PLU 2nd@ 3.PLU & PLU 2nd@ 4.Sub-Department 5.Department 6.Range 7.PLU -> 2nd@ Copy 8.AMT / Rate to Key

Page 155: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

155QT-2000 Programming Manual

5. Select the <department> directly or by entering record No.and press the <YES> key.

6. Enter the unit price and press the <YES> key to fix them.Pressing <YES> twice programs the same unit price to thenext record.

7. Press the <ESC> key to return to the previous menu.

6-2-6 Programming PLU/PLU 2nd@/subdepartment/department unit price by range

Operation

4. Select “6.Range” and press the <YES> key.

5. Select the subject you want to modify, “PLU/PLU 2nd@/Sub-Department/Department” and press the <YES> key.

0.00

Unit Price/Qty

Department 1.DEPT01 2.DEPT02 3.DEPT03 4.DEPT04

0.00

No. Descriptor Price 1 DEPT01 10.00 2 DEPT02 20.00 3 DEPT03 30.00 4 DEPT04 40.00

0.00

Unit Price/Qty

Unit Price/Qty 1.PLU 2.PLU 2nd@ 3.PLU & PLU 2nd@ 4.Sub-Department 5.Department 6.Range 7.PLU -> 2nd@ Copy 8.AMT / Rate to Key

0.00

Unit Price/Qty

Range 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department

Page 156: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

156

Program 1

6. Enter the unit price (and size for PLU 2nd@) and press the<YES> key.

7. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

8. Press the <YES> key.9. Press the <ESC> key to return to the previous menu.

0.00

Unit Price/Qty

Price 0.00

Enter Start range 0 End range 0

OK? YES

0.00

Unit Price/Qty

Price 10.00

Enter Start range 0 End range 0

OK? YES

0.00

Unit Price/Qty

Price 10.00

Enter Start range 12 End range 25

OK? YES

0.00

Unit Price/QtySize 12.00Price @0.00

Input Range Start 0000 Range End 0000

OK? Yes

Page 157: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

157QT-2000 Programming Manual

6-2-7 Copying PLU unit price to PLU 2nd unit price

Operation

4. Select “7.PLU –> 2nd@ Copy” and press the <YES> key.

5. Enter the start range No. and press the <YES> key.(It starts “0001” if you skip to enter the start range.)Then enter the end range No. and press the <YES> key.(It ends the last record if you skip to enter the end range.)

6. Press the <YES> key.7. Press the <ESC> key to return to the previous menu.

0.00

Unit Price/Qty

Unit Price/Qty 1.PLU 2.PLU 2nd@ 3.PLU & PLU 2nd@ 4.Sub-Department 5.Department 6.Range 7.PLU -> 2nd@ Copy 8.AMT / Rate to Key

0.00

Unit Price/Qty

PLU -> 2nd@ Copy 1.DEPT001 Enter Start range 123 End range 0

OK? YES

0.00

Unit Price/Qty

PLU -> 2nd@ Copy 1.DEPT001 Enter Start range 123 End range 999

OK? YES

Page 158: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

158

Program 1

6-2-8 Programming amount or rate to keys

Operation

4. Select “8.AMT/Rate to Key” and press the <YES> key.

5. a) Function keysEnter the unit price or rate and press the corresponding key.(CA, CHK, NB, +, –, CPN, %+, %–, CE)b) PLUEnter the PLU No., press the <PLU#> key, enter the unitpriceand press the <YES> key. Pressing <YES> twice programsthe same unit price to the next record.c) PLU 2nd @Enter unit price and size, and press the <2nd@> key and<YES> key.

6. Press the <ESC> key to return to the previous menu.

0.00

Unit Price/Qty

Unit Price/Qty 1.PLU 2.PLU 2nd@ 3.PLU & PLU 2nd@ 4.Sub-Department 5.Department 6.Range 7.PLU -> 2nd@ Copy 8.AMT / Rate to Key

0.00

Unit Price/Qty

PLU0002 40.00

Unit Price/QtyPLU0001 0001-004 @10.00PLU0002 0002-004 @20.00PLU0003 0003-004 0.00 @30.00PLU0004 0004-004 12.34 @40.00

%- 5.5000%

Unit Price/Qty+ @1.00 %- 5.5000%CE 105.067CE 0.286

Page 159: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

159QT-2000 Programming Manual

7. Program 6 ..................................................................................................1607-1. Program read general procedure ............................................................... 1607-2. Program read report sample ...................................................................... 161

7-2-1. Unit Price/Qty .................................................................................................. 1617-2-2. Item Descriptor................................................................................................ 1627-2-3. Character and Message.................................................................................. 1627-2-4. Machine feature .............................................................................................. 1667-2-5. Clerk................................................................................................................ 1957-2-6. Key feature...................................................................................................... 2077-2-7. Keyboard......................................................................................................... 2277-2-8. Memory allocation ........................................................................................... 227

Page 160: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

160

Program 6

7. Program 6

7-1. Program read general procedure

Operation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> repeatedly to assign Program 6 mode.

3. Press the <YES> key.

4. Select an appropriate job and press the <YES> key.

5. Select an appropriate job and press the <YES> key.The program read report is issued.If the job requires range designation, the next screen will beappeared.

6. Enter the start and end range and press the <YES> key.The program read report is issued from the printer.

0.00

P6 C01 15-12-97 12:34 000000

PGM6 1.PGM Read Report

0.00

PGM Read Report

PGM Read Report 1.Unit Price/Qty 2.Item Descriptor 3.Char & Message 4.Machine Feature 5.Clerk 6.Key Feature 7.Key Board 8.Memory Alloc.

0.00

PGM Read Report

Unit Price/Qty 1.PLU 2.PLU 2nd@ 3.Sub-Department 4.Department 5.Function Key

0.00

PLU

Enter Start range 0 End range 0

OK? YES

Page 161: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

161QT-2000 Programming Manual

7-2. Program read report sample

7-2-1. Unit Price/Qty

7-2-1-1. PLU unit price

PLU0001 0001-004 — PLU descriptor/Record No./File [email protected] — Unit Price

PLU0002 [email protected]

PLU0003 [email protected]

7-2-1-2. PLU 2nd unit price

PLU0001 0001-054 — PLU 2nd descriptor/Record No./File No.2 @23.45 — Unit quantity/2nd unit Price

PLU0002 0002-0541 @10.00

PLU0003 0003-0540 @2.00

7-2-1-3. Subdepartment

SUBDEPT01 0001-003 — Subdepartment descriptor/Record No./File [email protected] — Unit Price

SUBDEPT02 [email protected]

SUBDEPT03 [email protected]

7-2-1-4. Department

DEPT01 0001-005 — Department descriptor/Record No./File [email protected] — Unit Price

DEPT02 [email protected]

DEPT03 [email protected]

7-2-1-5. Function key

%- 0013-002 — Function key descriptor/Record No./File No.0%— Unit Price or Percent rate

- [email protected]

CASH [email protected]

Page 162: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

162

Program 6

7-2-2. Item Descriptor

7-2-2-1. PLU

PLU0001 0001-004 — PLU descriptor/Record No./File No.PLU0002 0002-004PLU0003 0003-004

7-2-2-2. PLU 2nd unit price

PLU0001 0001-054 — PLU 2nd descriptor/Record No./File No.PLU0002 0002-054PLU0003 0003-054

7-2-2-3. Subdepartment

SUBDEPT01 0001-003 — Subdepartment descriptor/Record No./File No.SUBDEPT02 0002-003SUBDEPT03 0003-003

7-2-2-4. Department

DEPT01 0001-005 — Department descriptor/Record No./File No.DEPT02 0002-005DEPT03 0003-005

7-2-2-5. Function key

RCT 0001-002 — Function key descriptor/Record No./File No.NEW/OLD 0002-002RC 0003-002DISP ON/OFF 0004-002CLK#1 0005-002

7-2-3. Character and Message

7-2-3-1. Receipt/Slip message

0001-032 — Record No./File No. YOUR RECEIPT — Receipt message0002-032 THANK YOU0003-032 CALL AGAIN0004-032 : :

7-2-3-2. Text recall

0001-039 — Record No./File No.TEXT RECALL MESSAGE 01 — Text recall message0002-039 : :

0010-039

.oNceR egasseM4~1 egassemogoltpieceR8~5 egassemlaicremmoctpieceR21~9 egassemmottobtpieceR61~31 egassempotlliB02~71 egassemypoclliB42~12 egassemmottoblliB82~52 egassemogolpilS23~92 egassemetaidemretnipilS63~33 egassemmottobpilS

73 desutoN74~83 egassemmottobtseuG

Page 163: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

163QT-2000 Programming Manual

7-2-3-3. Order character

ORDER CHAR 1 0001-065 — Order character/Record No./File No.ORDER CHAR 2 0002-065 : :ORDER CHAR 10 0010-065

7-2-3-4. Fixed totalizer

GROSS 0001-001 — Descriptor/Record No./File No.NET 0002-001CAID 0003-001 : :EX5 0059-001

.oNceR rotpircseD .oNceR rotpircseD100 latotselasssorG 130 1rewardnihsacycnerrucngieroF200 latotselasteN 230 1rewardnikcehcycnerrucngieroF300 rewardnihsaC 330 2rewardnihsacycnerrucngieroF400 tnuomaderalcedhsaC 430 2rewardnikcehcycnerrucngieroF500 tnuomahsactrohsderalceD 530 3rewardnihsacycnerrucngieroF600 tnuomahsacrevoderalceD 630 3rewardnikcehcycnerrucngieroF700 rewardniegrahC 730 noitcudeR800 tnuomaderalcedegrahC 830 nrutermetI900 tnuomaegrahctrohsderalceD 930 retnuocraelC010 tnuomaegrahcrevoderalceD 040 desutoN110 rewardnikcehC 140 gnidnuoR210 tnuomaderalcedkcehC 240 desutoN310 tnuomakcehctrohsderalceD 340 desutoN410 tnuomakcehcrevoderalceD 440 desutoN510 rewardnitiderC 540 1tnuomaelbaxaT610 tnuomaderalcedtiderC 640 1xaT710 tnuomatiderctrohsderalceD 740 desutoN810 tnuomatidercrevoderalceD 840 2tnuomaelbaxaT910 desutoN 940 2xaT020 desutoN 050 desutoN120 desutoN 150 3tnuomaelbaxaT220 desutoN 250 3xaT320 latotedomdnufeR 350 desutoN420 tnuocremotsuC 450 4tnuomaelbaxaT520 remotsucrepselasegarevA 550 4xaT620 eefecivresgnihsackcehC 650 desutoN720 eefecnalaBweN 750 5tnuomaelbaxaT820 desutoN 850 5xaT920 latot1noissimmockrelC 950 desutoN030 latot2noissimmockrelC

7-2-3-5. Group character

GROUP01 0001-006 — Group character/Record No./File No.GROUP02 0002-006GROUP03 0003-006

Page 164: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

164

Program 6

7-2-3-7. Special character

• @No / * 0001-023 — Special character/Record No./File No.NoCTX 0002-023X BUSY 0003-023 : :TL 0028-023

Rec. No.

001

002

003

004005006007008009010011012013014015016017018019020021022023024025026027028029030031032033034035036037038039040041042043

Contents DescriptorAmount symbol (2), @(2), No (2), split pricing (1),Training filler (1)No. of item sold (2), Customer count (2)Multiplication (6)Recalling for a check (6)Taxable symbol 1 (3 e.a.)Taxable symbol 2 (3 e.a.)Taxable symbol 3 (3 e.a.)Foreign currency (2)/Selective item symbol (3)Mode symbol 1 (4) (4 e.a.)Mode symbol 2 (4) (4 e.a.)Mode symbol 3 (4) (4 e.a.)Decimal: amount/q'ty, Delimiter (1 e.a.)A.M., P.M. (3 e.a.)Slip continued (12), page (2)Online password (8)Display subtotal symbol (ST key) (16)Subtotal symbol (16)Total symbol (16)Change symbol (16)Check cashing fee (16)Check cashing amount (16)Bon message (16)Not usedCheck No. (12)Service total (16)Item discount total (16)Not usedSeat No. (16)Total symbol (X/Z report) (16)Clock-in symbol (16)Clock-out symbol (16)Break-in symbol (16)Break-out symbol (16)Job code symbol (16)Work time symbol (16)Break time symbol (16)Tip declaration symbol (16)Regular work hours (Employee report) (16)Overtime work hours (Employee report) (16)Employee report (1) (4 e.a.)Employee report (2) (4 e.a.)Hourly labor pay (16)Hourly labor proceeds (16)Pay per transaction (16)

• @No / * $ @No / * NoCTX X BUSY BUSY T1 T2 T3 T4 T5T12T13T14 T23 T1 * * * * • REG RFR-MGRPn†X/ZPGM TRG.., AM PMCONTINUED P STSTTLCG-CACG ** STUB **

CHECK No.SRVC TLDISCOUNT

SEAT#TLCLOCK-INCLOCK-OUTBREAK-INBREAK-OUTJOBWORK TIMEBREAK TIMECASH TIPREGULAR TIMEOVER TIMEIN OUT BRK JOB#TIP WORKCOSTNET SALES/HOURCOST/TRANSACTION

OthersU.S.

OthersU.S.

Page 165: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

165QT-2000 Programming Manual

7-2-3-8. Report header

FIXED TTL 0001-024 — Report header/Record No./File No.FREE FUNCTION 0002-024SUB DEPT 0003-024 : :TIME ATTENDANCE 0017-024

7-2-3-9. Endorse message

0001-033 — Record No./File No.ENDORSE MESSAGE 1 — Endorse message0002-033ENDORSE MESSAGE 20003-033ENDORSE MESSAGE 30004-033ENDORSE MESSAGE 4

7-2-3-10. GT character

GT1 0001-020 — GT character/Record No./File No.GT2 0002-020GT3 0003-020

.oN.ceR stnetnoC rotpircseD100 troperrezilatotdexiF LTTDEXIF200 troperyeknoitcasnarT NOITCNUFEERF300 tropertnemtrapedbuS TPEDBUS400 troperULP ULP500 tropertnemtrapeD TPED600 troperpuorG PUORG700 troperkrelc/reihsaC KRELC/REIHSAC800 desutoN900 troperselasylruoH YLRUOH010 troperselasylhtnoM YLHTNOM110 troper)laicnaniF(hsalF HSALF210 troperkcehcnepO KHCNEPO310 tropersisylanaelbaT SISYLANAELBAT410 troperkcotsULP KCOTSULP510 troperlasuacdioV NOSAERDIOV610 troperyromemlanruoJ YROMEM-J710 ecnadnettA&emiT EEYOLPME810 robalylruoH ROBALYLRUOH910 metiylruoH TCUDORPYLRUOH

Page 166: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

166

Program 6

noitpircseD eciohC margorPedoc

"0"syawlA ;;;;D

271D

171D

071D

961

nwodyatsforebmunmumixaMehT1,0=sutatS nwodyatsforebmun ,8~2=

9=timiloN

tnacifingiSrebmun

:D

861

nwodyatsforebmunmuminiMehT1,0=sutatS nwodyatsforebmun ,8~2=

9=timiloN

tnacifingiSrebmun

:D

761

puorgnwodlluP/@dn2ULP/ULP)1(rebmundroceR

::::D

661D

561D

461D

361

"0"syawlA ;D

261

puorgnwodlluP/@dn2ULP/ULP)1(rebmuneliF

: ~:D

161D

51

puorgnwodlluP/@dn2ULP/ULP)02(rebmundroceR

::::D

41D

31D

21D

11

"0"syawlA ;D

01

puorgnwodlluP/@dn2ULP/ULP)02(rebmuneliF

:::D

9D

8D

7

"0"syawlA ; ~;D

6D

1

7-2-4. Machine feature

7-2-4-1. Pulldown group

LIST01 0001-026 — Record No./File No. 000000 000000 — D172~D167, D6~D1

0101-004 PLU0101 — Link PLU, PLU 2nd@ Record No./File No./Descriiptor 0102-004 PLU0102 0103-004 PLU0103 : : 0120-004 PLU0120

Page 167: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

167QT-2000 Programming Manual

7-2-4-2. Set menu table

0001-028 — Record No./File No. 0001-004 PLU0001 — Link PLU, PLU 2nd@ Record No./File No./Descriiptor 0002-054 PLU0002 0003-004 PLU00030002-0280003-028 : :

7-2-4-3. Arrangement

0001-038 ABCDEF — Record No./File No./Paramater0002-0380003-038 : :

7-2-4-4. Batch X/Z

0001-029 001112151700000000 — Record No./File No./Parameter0002-029 1011121517000000000003-029 011112151700000000 : :

noitpircseD eciohC margorPedoc

.troperdaereussiotwollA a 0=seY1=oN

:)c+b+a(

D81

.tropertesereussiotwollA b 0=seY2=oN

)ecnaussitcerid(noitcelesteseR/daeR c 0=daeR4=teseR

:aeradetropeR,1=aera1cidoireP,0=aerayliaD

3=aeranoitadilosnoC,2=aera2cidoireP

tnacifingiSrebmun

:D

71

1edoctropeRtnacifingiS

srebmun::

D61

D51

2edoctropeRtnacifingiS

srebmun::

D41

D31

3edoctropeRtnacifingiS

srebmun::

D21

D11

4edoctropeRtnacifingiS

srebmun::

D01

D9

5edoctropeRtnacifingiS

srebmun::

D8

D7

6edoctropeRtnacifingiS

srebmun::

D6

D5

7edoctropeRtnacifingiS

srebmun::

D4

D3

8edoctropeRtnacifingiS

srebmun::

D2

D1

Page 168: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

168

Program 6

noitpircseD eciohC margorPedoc

:redroetaD3=raeY/yaD/htnoM,2=raeY/htnoM/yaD,1/0=yaD/htnoM/raeY

tnacifingiS)3~0(rebmun

:D

21

:edomyratenoM0 ,0= 0º ,1= 00º ,2= 000º 3=

tnacifingiS)3~0(rebmun

:D

11

"0"syawlA ;;;;D

01D

9D

8D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

rebmunenihcaMtnacifingiS

rebmun::::

D4

D3

D2

D1

7-2-4-5. General feature

D12

D11

D10D

9D

8D

7D

6D

5D

4D

3D

2D

1

0001-022 220000000000 — Record No./File No./Parameter *

0002-022 000000000000 *

0003-022 000000000000 *

0004-022 000000000000 *

0005-022 000000002002 *

0006-022 000000000200 *

: :0034-022 064907570000 *

0035-022 000000000000 *

* Refer to each record format.

Record 0001-022

Record 0002-022

Page 169: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

169QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

sitroperteserrezilatotdexifyliadretfarebmunevitucesnocteseR.deussi

1=seY0=oN

:D

8

"0"syawlA ;D

7

:eulavtratsrebmunevitucesnoC

:::D

6D

5D

4

:::D

3D

2D

1

noitpircseD eciohC margorPedoc

:gnidnuoR,3=kramneD,2=2FI,1=1FI,0=gnidnuoroN

5=eropagniS,4=yawroN

tnacifingiS)5~0(rebmun

:D

01

:metsysxaT,2=adanaC,1=SU,0=TAV

3=eropagniS

tnacifingiS)3~0(rebmun

:D

9

"0"syawlA ;D

8

.noitarepoedom–GER/FRnirednettnuomawollA a 0=seY2=oN :

)b+a(D

7

:gnineporewardhsaC1 .dezilanifsinoitcasnartehtnehwyletaidemmI2 .desaelersiyroslupmocnoitadilavretfA

b 1 0=2 4=

"0"syawlA ;;D

6D

5

ofnoitacificepstimiltnuomahgiH r .tnuomarewardniyenom)noitcnuflenitneS(

mumixaM)9~0(eulav ::

D4

D3forebmuN

)9~0(sorez

"0"syawlA ;;D

2D

1

Record 0003-022

Record 0004-022

Page 170: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

170

Program 6

noitpircseD eciohC margorPedoc

.noitazilanifgnirudenillatottnirP a 0=seY1=oN

:)c+b+a(

D01

:metmsysemiT1 ,metsysruoh42 2 metsysruoh21

b 1 0=2 2=

.tpiecergniussiretfaenilenodeeF c 0=oN4=seY

.1tnuomaelbaxattnirP a 0=seY1=oN

:)c+b+a(

D9

.2tnuomaelbaxattnirP b 0=seY2=oN

.3tnuomaelbaxattnirP c 0=seY4=oN

.4tnuomaelbaxattnirP a 0=seY1=oN

:)c+b+a(

D8

.5tnuomaelbaxattnirP b 0=seY2=oN

.gnitnirpunemtesnwod-kaerB c 0=oN4=seY

"0"syawlA ;;;D

7D

6D

5

.dlosmetiforebmuntnirP a 0=oN1=seY :

)b+a(D

4.slobmysxattnirP b 0=seY2=oN

"0"syawlA ;D

3

.tpiecernoecirptinutnirP0=oN4=seY

:D

2

.noitarepoyekraelctnirP a 0=oN1=seY

:)c+b+a(

D1

.redaehnosremotsucforebmuntnirP b 0=seY2=oN

.tpiecerno.oNULPtnirP c 0=oN4=seY

Record 0005-022

Page 171: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

171QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

ehtot–/+fosutatsnoissimmocdnasutatselbaxatehtwolloF.metisuoiverp a 0=seY

1=oN:

)c+b+a(D

21

.tigidtsalehtno5ro0tcirtseR b 0=oN2=seY

.ecnadiugrotarepoyalpsiD c 0=seY4=oN

"0"syawlA ;D

11

.rewardniyenomehteralcedotecroF0=oN4=seY

:D

01

.noitazilaniferofeblatotbussserpotecroF a 0=oN1=seY

:)c+b+a(

D9

.noitazilanifelihwecnalabtidercwollA b 0=seY2=oN

.noitarepoedomsunimretsiger/dnuferelpitlumwollA c 0=seY4=oN

.metiehtot–%/+%,–/+fotluserehttceffA a 0=oN1=seY :

)b+a(D

8.latottennixatno-ddaedulcnI b 0=seY2=oN

.latottenninoissimmocedulcnI0=seY2=oN

:D

7

.enothctacyeksdnuoS a 0=seY2=oN :

)b+a(D

6.deussisienolanigiroehtfineve,tpiecertsopeussiotwollA b 0=oN4=seY

.rewardtilstcennoC0=oN4=seY

:D

5

semocebytitnauqkcotsehtnehwnoitartsigertibihorP.evitagen a 0=oN

2=seY :)b+a(

D4

kcotsmuminimrednusemocebytitnauqkcotsehtnehwtrelA.ytitnauq b 0=oN

4=seY

.noitarepodnuferehtfineveytitnauqkcotsottceffA a 0=oN1=seY

:)c+b+a(

D3

.enolanigiroehtotnoitartsigermetidiov/dnuferegreM b 0=oN2=seY

.noitcasnartenorep–%/+%,–/+fonoitartsigerenowollA c 0=oN4=seY

.noitartsiger–%/+%fotigidtnacifingistsaelehtnodnuoR a 0=oN1=seY :

)b+a(D

2(.rotarapesyalpsiD erutuf ) b 0=seY2=oN

.gnineporewardyroslupmocelihwyrtneciremunwollA a 0=seY1=oN

:)c+b+a(

D1

.metinatcelesotyekSEYesU b 0=seY2=oN

:gnirebmunULP4=edocmodnaryB,0=)laitneuqeS(.oNyromemyB c tnacifingiS

rebmun

Record 0006-022

Page 172: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

172

Program 6

noitpircseD eciohC margorPedoc

.latotssorgtnirP a 0=seY1=oN

:)c+b+a(

D21

.latottentnirP b 0=seY2=oN

.rewardnihsactnirP c 0=seY4=oN

(.ecnereffidrewardnihsactnirP erutuf ) a 0=seY1=oN

:)c+b+a(

D11

.rewardniegrahctnirP b 0=seY2=oN

(.ecnereffidrewardniegrahctnirP erutuf ) c 0=seY4=oN

.rewardnikcehctnirP a 0=seY1=oN

:)c+b+a(

D01

(.ecnereffidrewardnikcehctnirP erutuf ) b 0=seY2=oN

.rewardnitiderctnirP c 0=seY4=oN

(.ecnereffidrewardnitiderctnirP erutuf )0=seY1=oN

:D

9

.latotedomdnufertnirP0=seY4=oN

:D

8

.sremotsucforebmuntnirP a 0=seY1=oN :

)b+a(D

7.remotsucrepselasegarevatnirP b 0=seY2=oN

.latoteefgnihsackcehctnirP a 0=seY1=oN :

)b+a(D

6.latoteefecnalabwentnirP b 0=seY2=oN

.latot1noissimmoctnirP a 0=seY1=oN

:)c+b+a(

D5

.latot2noissimmoctnirP b 0=seY2=oN

.rewardniycnerrucngieroftnirP c 0=seY4=oN

.latottnuocsidtnirP a 0=seY1=oN

:)c+b+a(

D4

.latotdnufertnirP b 0=seY2=oN

.retnuocraelctnirP c 0=seY4=oN

.latotgnidnuortnirP0=seY2=oN

:D

3

"0"syawlA ;;D

2D

1

Record 0008-022

Page 173: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

173QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

.1tnuomaelbaxattnirP a 0=seY1=oN :

)b+a(D

21.1xattnirP b 0=seY2=oN

.2tnuomaelbaxattnirP a 0=seY1=oN :

)b+a(D

11.2xattnirP b 0=seY2=oN

.3tnuomaelbaxattnirP a 0=seY1=oN :

)b+a(D

01.3xattnirP b 0=seY2=oN

.4tnuomaelbaxattnirP a 0=seY1=oN :

)b+a(D

9.4xattnirP b 0=seY2=oN

.5tnuomaelbaxattnirP a 0=seY1=oN :

)b+a(D

8.5xattnirP b 0=seY2=oN

"0"syawlA ;;;;D

7D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

)setunim95~00(remitlliTtnacifingiS

srebmun::

D4

D3

)sdnoces95~00(remitlliTtnacifingiS

srebmun::

D2

D1

Record 0009-022

Record 0010-022

Page 174: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

174

Program 6

noitpircseD eciohC margorPedoc

.)troper2&1cidoirep(1latotdnargtnirP a 0=seY1=oN

:)c+b+a(

D6

.)troper2&1cidoirep(2latotdnargtnirP b 0=seY2=oN

.)troper2&1cidoirep(3latotdnargtnirP c 0=seY4=oN

.)troperyliad(1latotdnargtnirP a 0=seY1=oN

:)c+b+a(

D5

.)troperyliad(2latotdnargtnirP b 0=seY2=oN

.)troperyliad(3latotdnargtnirP c 0=seY4=oN

"0"syawlA ;;;D

4D

3D

2

.troperylhtnomehtfoegarevaehttnirP0=seY1=oN

:D

1

noitpircseD eciohC margorPedoc

.margorpafonoitelpmocretfaatadmargorpehttsacdaorB0=oN1=seY

:D

21

"0"syawlA ;;;D

01D

9D

8

.tlusernoitadilosnoc/noitcellocZtnirP a 0=seY1=oN

:)c+b+a(

D8

.tlusernoitadilosnoc/noitcellocZteseR b 0=seY2=oN

.noitadilosnocZretfaretsamotytitnauqkcotsypoC c 0=oN4=seY

ehtrofdednopsertonsahhcihwlanimretehthtllopotyrteR.gnilloptsrif a 0=seY

2=oN :)b+a(

D7.noitareporetsamenil-niwollA b 0=seY

4=oN

.noitadilosnoc/noitcellocZerofebtropertnirP0=seY4=oN

:D

6

:noitceleselifecruoS1 ,eliflanimreT 2 elifnoitadilosnoC

a 1 0=2 1= :

)b+a(D

5.noitarepoZretfaelifnoitadilosnocehtotddA b 0=seY4=oN

"0"syawlA ;;;;D

4D

3D

2D

1

Record 0012-022

Record 0013-022

Page 175: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

175QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

.troperdaerrezilatotdexifyalpsiD/tnirP a0=tnirP

1=yalpsiD:

)c+b+a(D

21

.troperdaernoitcasnartyalpsiD/tnirP b0=tnirP

2=yalpsiD

.troperdaertnemtrapedbus/tnemtrapedyalpsiD/tnirP c0=tnirP

4=yalpsiD

.troperdaerkcots/ULPyalpsiD/tnirP a0=tnirP

1=yalpsiD :)b+a(

D11

.troperdaerpuorgyalpsiD/tnirP b0=tnirP

4=yalpsiD

.troperdaerkrelcyalpsiD/tnirP a0=tnirP

1=yalpsiD:

)c+b+a(D

01

.troperdaerylhtnom/ylruohyalpsiD/tnirP b0=tnirP

2=yalpsiD

.troperdaerkcehcnepoyalpsiD/tnirP c0=tnirP

4=yalpsiD

.troperdaersisylanaelbatyalpsiD/tnirP a0=tnirP

1=yalpsiD :)b+a(

D9

.troperdaeryromemlanruojyalpsiD/tnirP b0=tnirP

4=yalpsiD

.troperdaermetiylruohyalpsiD/tnirP a0=tnirP

1=yalpsiD:

)c+b+a(D

8

.troperdaereeyolpmeyalpsiD/tnirP b0=tnirP

2=yalpsiD

.troperdaerrobal/ylruohyalpsiD/tnirP c0=tnirP

4=yalpsiD

.troperteserrezilatotdexifyalpsiD/tnirP a0=tnirP

1=yalpsiD:

)c+b+a(D

7

.tropertesernoitcasnartyalpsiD/tnirP b0=tnirP

2=yalpsiD

.tropertesertnemtrapedbus/tnemtrapedyalpsiD/tnirP c0=tnirP

4=yalpsiD

.troperteserkcots/ULPyalpsiD/tnirP a0=tnirP

1=yalpsiD :)b+a(

D6

.troperteserpuorgyalpsiD/tnirP b0=tnirP

4=yalpsiD

.troperteserkrelcyalpsiD/tnirP a0=tnirP

1=yalpsiD:

)c+b+a(D

5

.troperteserylhtnom/ylruohyalpsiD/tnirP b0=tnirP

2=yalpsiD

.troperteserkcehcnepoyalpsiD/tnirP c0=tnirP

4=yalpsiD

.tropertesersisylanaelbatyalpsiD/tnirP a0=tnirP

1=yalpsiD :)b+a(

D4

.troperteseryromemlanruojyalpsiD/tnirP b0=tnirP

4=yalpsiD

.troperdaersisylanaelbatyalpsiD/tnirP a0=tnirP

1=yalpsiD :)b+a(

D3

.troperdaeryromemlanruojyalpsiD/tnirP b0=tnirP

4=yalpsiD

.troperdaermetiylruohyalpsiD/tnirP a0=tnirP

1=yalpsiD:

)c+b+a(D

2

.troperdaereeyolpmeyalpsiD/tnirP b0=tnirP

2=yalpsiD

.troperdaerrobal/ylruohyalpsiD/tnirP c0=tnirP

4=yalpsiD

.troperdaerytivitcaeeyolpmeyalpsiD/tnirP a0=tnirP

2=yalpsiD:

)c+b+a(D

1.troperlaicnanifyalpsiD/tnirP b

0=tnirP4=yalpsiD

Record 0014-022

Page 176: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

176

Program 6

noitpircseD eciohC margorPedoc

.tropertnemtrapedbus/tnemtrapedpiks-oreZ a 0=seY1=oN :

)b+a(D

21.troperkrelcpiks-oreZ b 0=seY2=oN

.tropernoitcasnartpiks-oreZ a 0=seY1=oN

:)c+b+a(

D11

.troperULPpiks-oreZ b 0=seY2=oN

.troperylruohpiks-oreZ c 0=seY4=oN

.troperpuorgpiks-oreZ a 0=seY1=oN

:)c+b+a(

D01

.troperylhtnompiks-oreZ b 0=seY2=oN

.tropersisylanaelbatpiks-oreZ c 0=seY4=oN

.tropermetiylruohpiks-oreZ a 0=seY1=oN :

)b+a(D

9.troperrobalylruohpiks-oreZ b 0=seY2=oN

"0"syawlA ;;;D

8D

7D

6

.troperULPehtno.oNULPtnirP0=oN1=seY

:D

5

.oitarselastnirP a 0=oN1=seY

:)c+b+a(

D4

.troperZelbuodeussI b 0=oN2=seY

xatdnatnuomaelbaxatfotnuomaetaluclac-erehttnirP.tnuoma c 0=oN

4=seY

.troperteserhctabretfakcotsteseR0=oN4=seY

:D

3

.retnuoctesertnirP a 0=seY1=oN

:)c+b+a(

D2

.rezilatottnuocsidmetitnirP b 0=oN2=seY

:troperULPforedrognitnirP1 ,)laitneuqes(.oNyromeM 2 edocmodnaR

c 1 0=2 4=

"0"syawlA ;D

1

Record 0015-022

Page 177: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

177QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)sruoh32~00(troperylruohfoemitlavretnItnacifingiS

srebmun::::

D8

D7

D6

D5:)setunim95~00(troperylruohfoemitlavretnI

).00:10sastaert"0000"(

)sruoh32~00(troperylruohfoemittratStnacifingiS

srebmun::::

D4

D3

D2

D1)sdnoces95~00(troperylruohfoemittratS

noitpircseD eciohC margorPedoc

(.)hsac(yroslupmocnoitaralcedyenoM erutuf ) a 0=oN1=seY

:)c+b+a(

D01

(.)egrahc(yroslupmocnoitaralcedyenoM erutuf ) b 0=oN2=seY

(.)kcehc(yroslupmocnoitaralcedyenoM erutuf ) c 0=oN4=seY

(.)tiderc(yroslupmocnoitaralcedyenoM erutuf ) a 0=oN1=seY :

)b+a(D

9.053-PUnisretcarahcthgih-elbuodtnirP b 0=oN2=seY

.tpiecertsopnipuorgybsmetideretsigeryfissalC a 0=oN1=seY

:)c+b+a(

D8

.tpiecertsopnitnemtrapedybsmetideretsigeryfissalC b 0=seY2=oN

:tamrofgnitnirpmetideifissalC1 ,latoT 2 liateD

c 1 0=2 4=

.latotbusnoissimmocnitnuomaTAVedulcnI0=oN1=seY

:D

7

:noissimmocfognidnuoR2=pudnuor,1=ffotuc,0=ffodnuoR

tnacifingiSrebmun

:D

6

.gnimmargorpecirptinunisorezowtdneppA0=oN1=seY

:D

5

.tpiecernoetadtnirP a 0=seY1=oN

:)c+b+a(

D4

.lanruojnoetadtnirP b 0=seY2=oN

.lanruoj/tpiecernorebmunevitucesnoctnirP c 0=seY4=oN

.tpiecernoemittnirP a 0=seY1=oN

:)c+b+a(

D3

.lanruojnoemittnirP b 0=seY2=oN

.tpiecernonoitartsigerULP/tnemtrapedemasehtegreM)noitadilosnocmetI( c 0=oN

4=seY

.troper/tpiecertuc-otuA0=oN1=seY

:D

2

Record 0016-022

Record 0017-022

Page 178: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

178

Program 6

noitpircseD eciohC margorPedoc

)99~00(pilsfosenilgnitnirpmumixaMtnacifingiS

srebmun::

D01

D9

.tpiecertseug&pilsnopuorgybsmetideretsigeryfissalC a 0=oN1=seY

:)c+b+a(

D8

tseug&pilsnotnemtrapedybsmetideretsigeryfissalC.tpiecer b 0=oN

2=seY

:tamrofgnitnirpmetideifissalC1 ,latoT 2 liateD

c 1 0=2 4=

"0"syawlA ;;D

7D

6

.gnitnirppilsretfadeefkcabpilS a 0=oN1=seY

:)c+b+a(

D5

.gnitnirpnoitadilavretfadeefkcabpilS b 0=oN2=seY

tnemesrodnekcehc/gnitnirpkcehcretfadeefkcabpilS.gnitnirp c 0=oN

4=seY

.tpiecertseug&pilsnoetadtnirP a 0=seY1=oN

:)c+b+a(

D4

.tpiecertseug&pilsnoemittnirP b 0=seY2=oN

.tpiecertseug&pilsno.oNevitucesnoctnirP c 0=seY4=oN

:egnartnirppilS1 ,noitcasnartehtfopotehttA 2 tpiecersihT

a 1 0=2 1=

:)c+b+a(

D3

.dnifenilotuapilselbanE b 0=oN2=seY

tseug&pilsnonoitartsigerULP/tnemtrapedemasehtegreM)noitadilosnocmetI(.tpiecer c 0=oN

4=seY

.senildeefotuapilStnacifingiS

srebmun::

D2

D1

Record 0018-022

Page 179: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

179QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

.)yromemlanruoj(lanruojnoedomgniniartnisnoitarepodroceR0=seY2=oN

:D

2

.rorrelluf/dne-raenyromemlanruoJtrelA0=seY1=oN

:D

1

noitpircseD eciohC margorPedoc

.egassemogoltpiecertnirP a 0=oN1=seY

:)c+b+a(

D21

.egassemlaicremmoctpiecertnirP b 0=oN2=seY

.egassemmottobtpiecertnirP c 0=oN4=seY

.egassemlaicremmocpilstnirP a 0=oN1=seY

:)c+b+a(

D11

.egassemmottobpilstnirP b 0=oN2=seY

.egassemetaidemretnipilstnirP c 0=oN4=seY

.egassempotllibtnirP a 0=oN1=seY

:)c+b+a(

D01

.egassemypocllibtnirP b 0=oN2=seY

.egassemmottobllibtnirP c 0=oN4=seY

:atadogoltpieceR1 ,epytretcarahC 2 epytcihparG

1 0=2 1=

:D

9

"0"syawlA ;;;;D

8D

7D

6D

5

"0"syawlA ;;;;D

4D

3D

2D

1

Record 0019-022

Record 0020-022

Page 180: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

180

Program 6

noitpircseD eciohC margorPedoc

.retcarahcredrohtiwredrotnirP a 0=oN1=seY :

)b+a(D

21.tnuomahtiwredrotnirP b 0=oN2=seY

.egassemnobelbuodtnirP a 0=oN1=seY :

)b+a(D

11.redronognitnirpunemtesnwodkaerB b 0=oN4=seY

.nwodsiretnirpredroehtnehwtrelA0=seY1=oN

:D

01

"0"syawlA ;D

9

retnirpnehctiknognitnirperofebrezzubdnuoS0=oN4=seY

:D

8

"0"syawlA ;;;D

7D

6D

5

.redrotuC a 0=oN2=seY :

)b+a(D

4.snehpyhtnirP b 0=oN4=seY

.gniniartgnirudsredrotuptuO a 0=oN2=seY :

)b+a(D

3

redrononoitartsigerULP/tnemtrapedemasehtegreM)noitadilosnocmetI(.tpiecer b 0=oN

4=seY

)9~0(.gnitnirpredroerofebsenildeeffo.oNtnacifingiS

rebmun:D

2

)9~0(.gnitnirpredroretfasenildeeffo.oNtnacifingiS

rebmun:D

1

noitpircseD eciohC margorPedoc

.unemtesnisecirpmetiliatedetaluclaC).kcotsdnaytitnauqylnoetaluclac,"oN"fI(

0=seY2=oN

:D

2

.ULPtnerapstiotULPdlihcfoseititnauqnoitartsigeryebO0=seY2=oN

:D

1

Record 0021-022

Record 0025-022

Page 181: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

181QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

:dohtemgnikcartkcehC1 ,.oNkcehC 2 .oNelbaT

a 1 0=2 1=

:)c+b+a(

D9

.ecnalabwenotuamrofreP b 0=oN2=seY

:.oNkcehcfotigidmumixaM1 ,tigid-6 2 tigid-21

c 1 0=2 4=

.ecnalabwenybnoitaluclacxaT0=oN1=seY

:D

8

.kcehcdlogniretsigernehw,ecnalabsuoiverptnirP0=seY2=oN

:D

7

"0"syawlA ;;;D

6D

5D

4

.kcehcdloybnoitartsigerULP/tnemtrapedemasehtegreM)noitadilosnocmetI(

0=oN4=seY

:D

3

"0"syawlA ;D

2

atadmetiehterutpaC0=oN1=seY

:D

1

noitpircseD eciohC margorPedoc

.tpurretnikrelcelbanE0=oN1=seY

:D

21

.rebmunkrelconsahohwkrelcaretsigerotelbanE0=oN4=seY

:D

11

"0"syawlA ;;;;D

01D

9D

8D

7

"0"syawlA ;;;;D

6D

5D

4D

3

.remitffo-ngisotuA).ffo-ngisotuaonsnaem"00",sdnoces99~00(

tnacifingiSsrebmun

::D

2D

1

noitpircseD eciohC margorPedoc

:DCLdn2fonoitubirttA,1=evisulcxekrelcnodengiS,0=DCLdn2oN

,2=evitanretlatpiecerderetsigeR4=yalpsidlanruoJ,3=yalpsidremotsuC

tnacifingiSrebmun

:D

21

.DCLdn2dnats1fostnetnocehtegnahcxeotelbanE0=oN1=seY

:D

11

"0"syawlA ;;;;D

01D

9D

8D

7

"0"syawlA ;;;;D

6D

5D

4D

3

).ffonrutonsnaem"00",setunim95~00(remitffothgilkcaBtnacifingiS

srebmun::

D2

D1

Record 0026-022

Record 0027-022

Record 0028-022

Page 182: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

182

Program 6

noitpircseD eciohC margorPedoc

.teehsunemtnerapts1ehtfo.oNteehStnacifingiS

rebmun:D

21

.1tnerapot1teehsunempudemmuS a 0=oN1=seY

:)c+b+a(

D11

.1tnerapot2teehsunempudemmuS b 0=oN2=seY

.1tnerapot3teehsunempudemmuS c 0=oN4=seY

.1tnerapot4teehsunempudemmuS a 0=oN1=seY

:)c+b+a(

D01

.1tnerapot5teehsunempudemmuS b 0=oN2=seY

.1tnerapot6teehsunempudemmuS c 0=oN4=seY

.1tnerapot7teehsunempudemmuS a 0=oN1=seY :

)b+a(D

9.1tnerapot8teehsunempudemmuS b 0=oN2=seY

.teehsunemtnerapdn2ehtfo.oNteehStnacifingiS

rebmun:D

8

.2tnerapot1teehsunempudemmuS a 0=oN1=seY

:)c+b+a(

D7

.2tnerapot2teehsunempudemmuS b 0=oN2=seY

.2tnerapot3teehsunempudemmuS c 0=oN4=seY

.2tnerapot4teehsunempudemmuS a 0=oN1=seY

:)c+b+a(

D6

.2tnerapot5teehsunempudemmuS b 0=oN2=seY

.2tnerapot6teehsunempudemmuS c 0=oN4=seY

.2tnerapot7teehsunempudemmuS a 0=oN1=seY :

)b+a(D

5.2tnerapot8teehsunempudemmuS b 0=oN2=seY

"0"syawlA ;;;D

4D

3D

2

.teehsenootsteehsunampumuS a 0=oN1=seY :

)b+a(D

1.rehtegotteehsunemtneraphtiwsteehsunemdlihcteseR b 0=oN2=seY

Record 0029-022

Page 183: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

183QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

.ULPhcuotfonoisnetxeytitnauqelbanE a 0=oN1=seY

:D

21

.tnemtrapedbushcuotfonoisnetxeytitnauqelbanE b 0=oN2=seY

.tnemtrapehcuotfonoisnetxeytitnauqelbanE c 0=oN4=seY

"0"syawlA ;;;;D

11D

01D

9D

8

"0"syawlA ;;;;D

7D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

teehsunemts1forebmunULPtratStnacifingiS

srebmun::::

D21D

11D

01D

9

teehsunemdn2forebmunULPtratStnacifingiS

srebmun::::

D8

D7

D6

D5

teehsunemdr3forebmunULPtratStnacifingiS

srebmun::::

D4

D3

D2

D1

noitpircseD eciohC margorPedoc

teehsunemht4forebmunULPtratStnacifingiS

srebmun::::

D21D

11D

01D

9

teehsunemht5forebmunULPtratStnacifingiS

srebmun::::

D8

D7

D6

D5

teehsunemht6forebmunULPtratStnacifingiS

srebmun::::

D4

D3

D2

D1

noitpircseD eciohC margorPedoc

teehsunemht7forebmunULPtratStnacifingiS

srebmun::::

D21D

11D

01D

9

teehsunemht8forebmunULPtratStnacifingiS

srebmun::::

D8

D7

D6

D5

"0"syawlA ;;;;D

4D

3D

2D

1

Record 0031-022

Record 0032-022

Record 0033-022

Record 0034-022

Page 184: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

184

Program 6

Record 0035-022

noitpircseD eciohC margorPedoc

:eeyolpmedegalluF)ruoh(emitkrowylkeeW

99~00 ::D

21D

11

)etunim(emitkrowylkeeW 95~00 ::D

01D

9

:eeyolpmeroniM)ruoh(emitkrowylkeeW

99~00 ::D

8D

7

)etunim(emitkrowylkeeW 95~00 ::D

6D

5

.tuo-dekcolctoneraeeyolpmefineveZEEYOLPMEwollA a 0=oN1=seY :

D4ylkeeW-iB/ylkeeWesU b 0=ylkeeW

2=ylkeeW-iB

"0"syawlA :D

3

emitkroWsaemitkaerBezingoceR0=oN1=seY

:D

2

*sruohkrowfognidnuoR,2=setunim51reP,1=setunim01reP,0=dnuortoN

4=setunim03reP,3=setunim02reP

tnacifingiSrebmun

:D

1

* :sruohkrowfonoitcalfgnidnuoR).nim(01=90~50,00=40~00:.nim01reP).nim(51=41~80,00=70~00:.nim51reP

).nim(00=01~00:.nim02reP

Page 185: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

185QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)95:32~00:00(emittratsreludehcStnacifingiS

srebmun::::

D82D

72D

62D

52

)95:32~00:00(emitdnereludehcStnacifingiS

srebmun::::

D42

D32D

22D

12

"0"syawlA ;D

02

:1lortnoclavretnI2=ylhtnoM,1=ylkeeW,0=yliaD

tnacifingiSrebmun

:D

91

:2lortnoclavretnIgninaemoN;yliaD

keewafoyadenifeD;ylkeeW,yadseuT;20,yadnoM;10,yadnuS;00

,yadirF;50,yadsruhT;40,yadsendeW;30yadrutaS;60

13~10,etadenifeD;ylhtnoMhtnomehtfodneehtsnaem99

tnacifingiSsrebmun

::D

81D

71

)95:32~00:00(emitlavretnItnacifingiS

srebmun::::

D61

D51D

41D

31

"0"syawlA ;D

21

.oNelbattnemegnarrAtnacifingiS

srebmun::::

D11

D01

D9

D8

.oNeliftnemegnarrAtnacifingiS

srebmun:::

D7

D6

D5

"0"syawlA ;;;;D

4D

3D

2D

1

7-2-4-6. Scheduler

D16

D15

D14

D13

D12

D11

D10D

9D

8D

7D

6D

5D

4D

3D

2D

1

0001-062 0000000000000000 — Record No./File No./Parameter (D28

~ D13)

000000000000 — Parameter (D12

~ D1)

0002-062 0000000000000000000000000000

0003-062 0000000000000000000000000000

0004-062 0000000000000000000000000000

Page 186: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

186

Program 6

noitpircseD eciohC margorPedoc

:atadgnitnirpenifeD)eziselbuod(tnuomagnitnirP;2tnuomagnitnirP;1

)eziselbuod(etadgnitnirP;4etadgnitnirP;3enilts1egassemtnemesrodnekcehC;5enildn2egassemtnemesrodnekcehC;6enildr3egassemtnemesrodnekcehC;7enilht4egassemtnemesrodnekcehC;8

tnacifingiSrebmun

:D

5

.gnitnirperofebdeeF a 0=oN1=seY

:)c+b+a(

D4

noitceriddeeF b 0=lamroN2=esreveR

.gnitnirpretfaenil1deeF c 0=oN4=seY

)9~0(gnitnirperofebsenildeeffo.oNtnacifingiS

rebmun:D

3

)94~00(stigidtesffognitnirPtnacifingiS

srebmun::

D2

D1

7-2-4-7. Check print

D6D

5D

4D

3D

2D

1

0001-041 000000 — Record No./File No./Parameter0002-041 0000000003-041 0000000004-041 000000

noitpircseD eciohC margorPedoc

puorgehtfo.oNkcehcmuminiM)".1"snaem"0"(

tnacifingiSsrebmun

::::::D

21D

11D

01D

9D

8D

7

puorgehtfo.oNkcehcmumixaMsnaem"000000"( .gnimmargorpon )

tnacifingiSsrebmun

::::::D

6D

5D

4D

3D

2D

1

7-2-4-8. Table analysis

D6D

5D

4D

3D

2D

1

TBL01 0001-018 — Table analysis descriptor/Record No./File No.000000 — Parameter (Minimum check No.)000000 — Parameter (Maximum check No.)

TBL02 0002-018000000000000

Page 187: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

187QT-2000 Programming Manual

7-2-4-9. Tax table

0001-025 — Record No./File No.TX1 10%— Tax rateTX1 0000 — Table maximum valueTX1 50 — Rounding codeTX1 02 — Table attribution0002-025TX2 10%TX2 0000TX2 50TX2 02

7-2-4-10. Void table

Mistake 001-012 — Void reason character/Record No./File No.000000 — Parameter

Out of Date 002-012 — Void reason character/Record No./File No.000000 — Parameter

noitpircseD eciohC margorPedoc

.eulavkcotsnruteR0=seY1=oN

:D

1

7-2-4-11. System connection

0001-901 MC #01 020101000000 — Record No./File No./Id character/Parameter0002-901 0000000000000003-901 0000000000000004-901 000000000000

noitpircseD eciohC margorPedoc

)sretcarahc21nihtiw(sretcarahcDIlacigoLtnacifingiS

sretcarahc: ~:D

42D

31

:lanimreT10=srehtO,20=flesenO

tnacifingiSsrebmun

::D

21D

11

:)eulavmargorp(retsampukcab/retsamgnikcartkcehC00=etilletaS,20=retsampukcaB,10=retsaM

tnacifingiSsrebmun

::D

01D

9

:)eulavtnerruc(retsampukcab/retsamgnikcartkcehC00=etilletaS,20=retsampukcaB,10=retsaM

tnacifingiSsrebmun

::D

8D

7

:)eulavmargorp(retsamtnirpPK00=etilletaS,20=retsampukcaB,10=retsaM

tnacifingiSsrebmun

::D

6D

5

:)eulavtnerruc(retsamtnirpPK00=etilletaS,10=retsaM

tnacifingiSsrebmun

::D

4D

3

"0"syawlA ;;D

2D

1

Page 188: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

188

Program 6

7-2-4-12. I/O parameter

0001-902 0000000000 — Record No./File No./Parameter0002-902 00000000000003-902 00000000000004-902 0000000000

noitpircseD eciohC margorPedoc

:etarduabenil-nI3=spbM52.1,2=spbk526,1=spbk213,0=spbk651

tnacifingiSrebmun

:D

1

noitpircseD eciohC margorPedoc

:noitcelestropenilnO,1=)mottob(2MOC,0=)edis(3MOC3=esuotwollatoN,2=)tnorf(tropRI

tnacifingiSrebmun

:D

3

:etarduabenilnO,2=spb0084,1=spb0069,0=spb00291

4=spb0021,3=spb0042

tnacifingiSrebmun

:D

2

:)reggirt(langisnoitavitcA2=langisoN,1=IC,0=RD

tnacifingiSrebmun

:D

1

noitpircseD eciohC margorPedoc

:detcetedsidneraenrepapretfA1=gnitnirppotS,0=gnitnirpeutitnoC

tnacifingiSrebmun

:D

1

noitpircseD eciohC margorPedoc

5103-ASybgnitnirpnoitadilav/pilsfostigidtesffofo.oN)64~00(

tnacifingiSsrebmun

::D

01D

9

"0"syawlA ;;;D

8D

7D

6

:gnitnirppilsrofdesuretnirP0=noitcennocoN,2=5103-AS,1=0021-PS

tnacifingiSrebmun

:D

5

:retnirproftropC232-SRgnisU2=1MOC,1=)edis(3MOC,0=)mottob(2MOC

tnacifingiSrebmun

:D

4

:retnirproftropC232-SRehtfoetarduaB,2=spb0084,1=spb0069,0=spb00291

4=spb0021,3=spb0042

tnacifingiSrebmun

:D

3

:tropC232-SRotdetcennocretnirpgnisU)053-PUOISAC(00=88T-MT

)5103-ASOISAC(10=059U-MT)NOSPE(20=003U-MT

)NEZITIC(30=132-MBC)NEZITIC(40=1453-PDi

tnacifingiSsrebmun

::D

2D

1

Record 0002

Record 0003

Record 0004

Record 0001

Page 189: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

189QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

:yalpsidraeR0=detcennoctoN,1=detcennoC

tnacifingiSrebmun

:D

2

:yalpsidetomeR0=detcennoctoN,1=detcennoC

tnacifingiSrebmun

:D

1

noitpircseD eciohC margorPedoc

desutoN ;D

2

:rolocyalpsiD1=dnuorgetihw/enileulB,0=dnuorgeulb/eniletihW

tnacifingiSrebmun

:D

1

Record 0005

Record 0006

noitpircseD eciohC margorPedoc

"0"syawlA ;;;D

01D

9D

8

"0"syawlA ;;;D

7D

6D

5

:retnirproftropC232-SRgnisU2=1MOC,1=)edis(3MOC,0=)mottob(2MOC

tnacifingiSrebmun

:D

4

:retnirproftropC232-SRehtfoetarduaB,2=spb0084,1=spb0069,0=spb00291

4=spb0021,3=spb0042

tnacifingiSrebmun

:D

3

:tropC232-SRotdetcennocretnirpgnisU)053-PUOISAC(00=88T-MT

)5103-ASOISAC(10=059U-MT)NOSPE(20=003U-MT

)NEZITIC(30=132-MBC)NEZITIC(40=1453-PDi

tnacifingiSsrebmun

::D

2D

1

Record 0007

Page 190: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

190

Program 6

7-2-4-13. Printer definition0001-903 MC #01 /1 01 — Record No./File No./Printer Name/Attribution MC #02 /20002-903 KP1 50 MC #01 /2 : :

noitpircseD eciohC margorPedoc

:retnirpfodniK,05=1#redrO,20=tropeR,10=J/R,00=oN

65=7#redrO..,15=2#redrO

tnacifingiSsrebmun

::D

03D

92

21nihtiw(retnirpniamhtiwgnitcennocsretcarahcDIRCE)sretcarahc

tnacifingiSsretcarahc

: ~:D

82D

71

21nihtiw(retnirppukcabhtiwgnitcennocsretcarahcDIRCE)sretcarahc

tnacifingiSsretcarahc

: ~:D

61D

5

:rebmunretnirpniaM20=)2(retnirP,10ro00=)1(retnirP

tnacifingiSsrebmun

::D

4D

3

:rebmunretnirppukcaB20=)2(retnirP,10ro00=)1(retnirP

tnacifingiSsrebmun

::D

2D

1

Page 191: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

191QT-2000 Programming Manual

7-2-4-14. Time Zone0001-800 000000000000 — REC#~FILE#/Significant number0001-800 000000000000 :

7-2-4-15. EmployeeHARRISON 123456 0001-801 — Employee#/Character/REC#~FILE# 9999999999 0001020304 — Social security No./Program (D33~D42)CLAPTON 000001 0002-801 0000000000 0000000000 :

noitpircseD eciohC margorPedoc

)999999~000000:stigid-6anihtiw(.oNeeyolpmE)rebmuntcelesonsnaem"000000"(

432100)ge.derongisi”orez“gnidaeR → 4321

tnacifingiSrebmun

:::D

44D

34D

24

:::D

14D

04D

93

)stiged-61(retcarahCtnacifingiS

retcarahc:

D83

D~32

)stiged-01anihtiw(.oNytiruceSlaicoS7654321000)ge.derongitonsi”orez“gnidaeR → 7654321000

tnacifingiSrebmun

:D

22D~

31

edoCboJyficepS a 0=oN1=seY

:)c+b+a(

D21

edoCboJtuohtiwni-kcolC b 0=oN2=seY

noitareponi-kcolCgnirudwodniwedoCboJehtesU c 0=oN4=seY

eeyolpmeroniM0=oN1=seY

:D

11

)99~00(1edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

01D

9

)99~00(2edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

8D

7

)99~00(3edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

6D

5

)99~00(4edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

4D

3

)99~00(rebmundrocerkrelC/reihsaCtnacifingiS

rebmun::

D2

D1

noitpircseD eciohC margorPedoc

)ruoH(emiTtratSenoZ 32~00 ::D

21D

11

)95~00()etuniM(emiTtratSenoZ 95~00 ::D

01D

9

)32~00()ruoH(emiTdnEenoZ 32~00 ::D

8D

7

)95~00()etuniM(emiTdnEenoZ 95~00 ::D

6D

5

)32~00()ruoH(elcyCenoZ 32~00 ::D

4D

3

)54,03,51,00()etuniM(elcyCenoZ 54,03,51,00 ::D

2D

1

Page 192: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

192

Program 6

7-2-4-16. Job CodeCOOK 0001-802 — Character/REC#~FILE# 00 @9999.99 12.34 — Programming (D17~D18) /Pay rate/Overtime pay ratioJOB#2 0002-802 00 @0.00 0.00 :

noitpircseD eciohC margorPedoc

).gnittesonsnaemretcarahcoN()tigid-61anihtiw(retcarahCtnacifingiS

retcarahc:

D82~ D

31

noitarepotuo-kcolCgnirudyroslupmocnoitaralceDpiT0=oN1=seY

:D

21

"0"syawlA ;D

11

)99.9999$~00.0$(etaryaPtnacifingiS

rebmun:

D01

D~5

)99.99$~00.0$(oitaryaPemitrevO)"00.1$"snaem"00.0$"(

tnacifingiSrebmun

::::D

4D

3D

2D

1

Page 193: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

193QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)99~00(edoCboJ)rebmuntcelesonsnaem"00"(

tnacifingiSrebmun

::D

22D

12

)32~00()ruoh(emiTtratStnacifingiS

rebmun::

D02

D91

)95~00()etunim(emiTtratStnacifingiS

rebmun::

D81

D71

)32~00()ruoh(emiTdnEtnacifingiS

rebmun::

D61

D51

)95~00()etunim(emiTdnEtnacifingiS

rebmun::

D41

D31

)32~00()ruoh(emiTkaerBtnacifingiS

rebmun::

D21

D11

)95~00()etunim(emiTkaerBtnacifingiS

rebmun::

D01

D9

)95~00()etunim(tratSerofeBecarGtnacifingiS

rebmun::

D8

D7

)95~00()etunim(tratSretfAecarGtnacifingiS

rebmun::

D6

D5

)95~00()etunim(dnEerofeBecarGtnacifingiS

rebmun::

D4

D3

)95~00()etunim(dnEretfAecarGtnacifingiS

rebmun::

D2

D1

7-2-4-17. ScheduleMONDAY (1) 0001-803 — Day of the week/Shift No./REC#~FILE# JOB#1 000000000000 — Job character/Programming (D3~D14) 00000000 — Programming (D3~D14)MONDAY (2) 0002-803 JOB#2 000000000000 00000000 :

Page 194: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

194

Program 6

7-2-4-18. IDC Link0001-804 0001-004 PLU0001 — REC#~FILE#/Target REC#~FILE#/Character 1010 — Programming (D01~D04)0001-804 0001-026 PLU0001 2000 :

noitpircseD eciohC margorPedoc

"0"syawlA ;D

21

elifkniLCDIyficepS3=)3(CDI,2=)2(CDI,1=)1(CDI,0=kniloN

tnacifingiSrebmun

:D

11

"0"syawlA ;D

01

:CDIroftegraT1=noitcnuf/metiylnO,0=snoitcasnartllA

tnacifingiSrebmun

:D

9

CDIroftegratehtfo.oNdroceRtnacifingiS

rebmun::::

D8

D7

D6

D5

"0"syawlA ;D

4

CDIroftegratehtfo.oNeliFtnacifingiS

rebmun:::

D3

D2

D1

Page 195: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

195QT-2000 Programming Manual

7-2-5. Clerk

7-2-5-1. Clerk featureC01 001-007 — Clerk name/Record No./File No.

0001 — Clerk secret code00 — Drawer No.

000111 — Clerk No. for clerk interrupt01-067 0000004000 — Refer to the record 01-067 †

02-067 0000000000 — Refer to the record 02-067 †

03-067 0000000000 — Refer to the record 03-067 †

04-067 000000000000 — Refer to the record 04-067 †

05-067 000000000000 — Refer to the record 05-067 †

06-067 000000000000 — Refer to the record 06-067 †

07-067 000000000000 — Refer to the record 07-067 †

08-067 000000000000 — Refer to the record 08-067 †

09-067 000000000000 — Refer to the record 09-067 †

10-067 000000000000 — Refer to the record 10-067 †

068 00000000 — Commission rate †

069 000000000000 — Table range †

C02 002-0070002 † Refer to the record format below.

: :

Table range

noitpircseD eciohC margorPedoc

)999999~1(egnarelbatrofeulavmuminiM).gnimmargorponsnaem"0"(

tnacifingiSrebmun

:: ~ ::D

21D

11D

8D

7

)999999~1(egnarelbatrofeulavmumixaM).gnimmargorponsnaem"0"(

tnacifingiSrebmun

:: ~ ::D

6D

5D

2D

1

Page 196: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

196

Program 6

noitpircseD eciohC margorPedoc

yroslupmocrebmunkcehC0=oN4=seY

:D

01

yroslupmocrebmunelbaT a 0=oN1=seY

:)c+b+a(

D9

yroslupmocremotsucforebmuN b 0=oN2=seY

)noitazilanifta(yroslupmoctpiecertseuG c 0=oN4=seY

)ecnalabwenta(yroslupmoctpiecertseuG a 0=oN1=seY

:)c+b+a(

D8

)noitazilanifta(yroslupmoctnirphctab-otuapilS b 0=oN2=seY

)ecnalabwenta(yroslupmoctnirphctab-otuapilS c 0=oN4=seY

:noitubirttakrelC2=reganaM,1=krelC,0=reihsaC

tnacifingiSrebmun

:D

7

krelcgniniarT0=oN1=seY

:D

6

krelcrehtoybdetaerckcehcnepootelbanE a 0=oN1=seY

:)c+b+a(

D5

nongisotelbasiD b 0=oN2=seY

noitazilaniftaffongiS c 0=oN4=seY

;noitangisedDCL0=noitinifedoN,2=DCLdn2esU,1=DCLts1esU

tnacifingiSrebmun

:D

4

yroslupmocrebmuntaeS a 0=oN1=seY :

)b+a(D

3yroslupmoctuo-ekaT/ni-taE b 0=oN2=seY

"0"syawlA ;D

2

:noitarepodioV2=dewollatoN,1=noitcasnarttnerruC,0=diovetelpmoC

tnacifingiSrebmun

:D

1

noitpircseD eciohC margorPedoc

)%99.99~10.0(1etarnoissimmoCtnacifingiS

rebmun)lamiced/w(

::::D

8D

7D

6D

5

)%99.99~10.0(2etarnoissimmoCtnacifingiS

rebmun)lamiced/w(

::::D

4D

3D

2D

1

Commission rate

Record 01-067

Page 197: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

197QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

.teehsunemts1esuotelbanE a 0=seY1=oN

:)c+b+a(

D01

.teehsunemdn2esuotelbanE b 0=seY2=oN

.teehsunemdr3esuotelbanE c 0=seY4=oN

.teehsunemht4esuotelbanE a 0=seY1=oN

:)c+b+a(

D9

.teehsunemht5esuotelbanE b 0=seY2=oN

.teehsunemht6esuotelbanE c 0=seY4=oN

.teehsunemht7esuotelbanE a 0=seY1=oN :

)b+a(D

8.teehsunemht8esuotelbanE b 0=seY2=oN

"0"syawlA ;;D

7D

6

"0"syawlA ;;D

5D

4

)8~0(.nongisretfarebmunteehsunemtluafeD,.oNteehsdelbasidehttestonoD(

).teehsunemsuoiverpgniniatniamsnaem"0"

tnacifingiSrebmun

:D

3

)2~0(.nongisretfarebmunteehsunem@tluafeD,.oNteehsdelbasidehttestonoD(

).teehsunemsuoiverpgniniatniamsnaem"0"

tnacifingiSrebmun

:D

2

tnemngissateehsunemnwodyatS/sutatS a 0=sutatS1=nwodyatS :

)b+a(D

1tnemngissateehsunem@nwodyatS/sutatS b 0=sutatS2=nwodyatS

Record 02-067

Page 198: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

198

Program 6

Record 03-067

noitpircseD eciohC margorPedoc

.edomGERnietarepootelbanE a 0=seY1=oN

:)c+b+a(

D01

.edomFERnietarepootelbanE b 0=seY2=oN

.edom–GERnietarepootelbanE c 0=seY4=oN

"0"syawlA ;D

9

.edom1MGPnietarepootelbanE a 0=seY1=oN

:)c+b+a(

D8

.edom2MGPnietarepootelbanE b 0=seY2=oN

.edom3MGPnietarepootelbanE c 0=seY4=oN

.edom4MGPnietarepootelbanE a 0=seY1=oN

:)c+b+a(

D7

.edom5MGPnietarepootelbanE b 0=seY2=oN

.edom6MGPnietarepootelbanE c 0=seY4=oN

.edom7MGPnietarepootelbanE0=seY1=oN

:D

6

.edomZ/XnietarpootelbanE a 0=seY1=oN

:)c+b+a(

D5

.edomreganaMnietarepootelbanE b 0=seY2=oN

.edomnoitadilosnoc/noitcerrocnietarepootelbanE c 0=seY4=oN

edomMGP-otuAnietarepoootelbanE a 0=seY1=oN :

)b+a(D

4edomrInietarepootelbanE b 0=seY2=oN

"0"syawlA ;;D

3D

2

:nongisretfaedomtluafeD2=Z/X,1=1MGP,0=GER

tnacifingiSrebmun

:D

1

Page 199: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

199QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

.hsacetarepootelbanE a 0=seY1=oN

:)c+b+a(

D21

.egrahcetarepootelbanE b 0=seY2=oN

.kcehcetarepootelbanE c 0=seY4=oN

.tidercetarepootelbanE a 0=seY1=oN :

)b+a(D

11.ecnalabwenetarepootelbanE b 0=seY4=oN

.yriuqniecirpetarepootelbanE a 0=seY2=oN :

)b+a(D

01.yriuqnikcotsetarepootelbanE b 0=seY4=oN

.llacerretcarahcetarepootelbanE a 0=seY1=oN

:)c+b+a(

D9

.tnirpretcarahcetarepootelbanE b 0=seY2=oN

.tnirpkcehcetarepootelbanE c 0=seY4=oN

.refsnartkrelcetarepootelbanE a 0=seY1=oN

:)c+b+a(

D8

.refsnartelbatetarepootelbanE b 0=seY2=oN

.pitetarepootelbanE c 0=seY4=oN

.tpiecerlamronetarpootelbanE0=seY1=oN

:D

7

.naoletarepootelbanE a 0=seY1=oN

:)c+b+a(

D6

.tnuoccanodevieceretarepootelbanE b 0=seY2=oN

.tuodiapetarepootelbanE c 0=seY4=oN

.pukcipetarepootelbanE a 0=seY1=oN :

)b+a(D

5.nopuocetarepootelbanE b 0=seY2=oN

.tisopedetarepootelbanE a 0=seY1=oN :

)b+a(D

4.sunimetarepootelbanE b 0=seY4=oN

.sunimtnecrepetarepootelbanE a 0=seY1=oN

:)c+b+a(

D3

.sulpetarepootelbanE b 0=seY2=oN

.sulptnecrepetarepootelbanE c 0=seY4=oN

.dnuferetarepootelbanE0=seY4=oN

:D

2

.2nopuocetarepootelbanE0=seY4=oN

:D

1

Record 04-067

Page 200: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

200

Program 6

noitpircseD eciohC margorPedoc

.noitadilavetarepootelbanE a 0=seY1=oN

:)c+b+a(

D21

.tpieceretarepootelbanE b 0=seY2=oN

.esrodnekcehcetarepootelbanE c 0=seY4=oN

.ddanonetarepootelbanE a 0=seY1=oN

:)c+b+a(

D11

.elason/ddanonetarepootelbanE b 0=seY2=oN

.elasonetarepootelbanE c 0=seY4=oN

remotsucfo.oNetarepootelbanE a 0=seY1=oN

:)c+b+a(

D01

.tnemegnarraetarepootelbanE b 0=seY2=oN

.egnahcxeycnerrucetarepootelbanE c 0=seY4=oN

.TAVetarepootelbanE a 0=seY1=oN :

)b+a(D

9.ypocllibetarepootelbanE b 0=seY2=oN

."0"syawlA ;D

8

.esaeler/deefkcabpilsetarepootelbanE0=seY4=oN

:D

7

.tnirppilsetarepootelbanE a 0=seY1=oN

:)c+b+a(

D6

.esaeler/deefpilsetarepootelbanE b 0=seY2=oN

.tfihsxatetarepootelbanE c 0=seY4=oN

.rebmunelbatetarepootelbanE0=seY4=oN

:D

5

.noitaralcedyenometarepootelbanE a 0=seY1=oN :

)b+a(D

4.tpmexexatetarepootelbanE b 0=seY2=oN

.tfihsunemetarepootelbanE0=seY1=oN

:D

3

.nepoCLetarepootelbanE a 0=seY1=oN

:)c+b+a(

D2

.nepoteserpetarepootelbanE b 0=seY2=oN

.@ts1etarepootelbanE c 0=seY4=oN

.@dn2etarepootelbanE a 0=seY1=oN :

)b+a(D

1.oNkrelcetarepootelbanE b 0=seY4=oN

Record 05-067

Page 201: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

201QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

.Z/XrotarepoetarepootelbanE a 0=seY1=oN :

)b+a(D

31.latotbusetarepootelbanE b 0=seY4=oN

.ffo/notpieceretarepootelbanE a 0=seY1=oN

:)c+b+a(

D21

.TS/ATetarepootelbanE b 0=seY2=oN

.oNrotarepoetarepootelbanE c 0=seY4=oN

.TS/DMetarepootelbanE0=seY2=oN

:D

11

.XetarepootelbanE a 0=seY1=oN

:)c+b+a(

D01

.roF/XetarepootelbanE b 0=seY2=oN

.XX/XetarepootelbanE c 0=seY4=oN

.XXX/XetarepootelbanE a 0=seY1=oN :

)b+a(D

9.noBnetteKetarepootelbanE b 0=seY2=oN

.TSmetievitcelesetarepootelbanE0=seY1=oN

:D

8

"0"syawlA ;;D

7D

6

.kcehcwenetarepootelbanE a 0=seY1=oN

:)c+b+a(

D5

.kcehcdloetarepootelbanE b 0=seY2=oN

.kcehcdlo/wenetarepootelbanE c 0=seY4=oN

.kcehcddaetarepootelbanE a 0=seY1=oN :

)b+a(D

4.kcehcetarapesetarepootelbanE b 0=seY2=oN

"0"syawlA ;;D

3D

2

.tuo/ni-kcolcetarepootelbanE a 0=seY1=oN :

)b+a(D

1.tuo/ni-kaerbetarepootelbanE b 0=seY2=oN

Record 06-067

Page 202: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

202

Program 6

noitpircseD eciohC margorPedoc

.noitutitsbusetarepootelbanE a 0=seY1=oN

:)c+b+a(

D21

.tnirpPKetarepootelbanE b 0=seY2=oN

.noBesuoHetarepootelbanE c 0=seY4=oN

"0"syawlA ;D

11

.kcehcneporotarepoetarepootelbanE a 0=seY1=oN

:)c+b+a(

D01

.egnahcaidemetarepootelbanE b 0=seY2=oN

.rebmuntaesetarepootelbanE c 0=seY4=oN

.ffo/noyalpsidetarepootelbanE a 0=seY1=oN

:)c+b+a(

D9

.edomGERetarepootelbanE b 0=seY2=oN

edomZ/XetarepootelbanE c 0=seY4=oN

.edomMGPetarepootelbanE0=seY1=oN

:D

8

.yrtnetsopetarepootelbanE a 0=seY1=oN

:)c+b+a(

D7

.taeperdnuoretarepootelbanE b 0=seY2=oN

.ni-taeetarepootelbanE c 0=seY4=oN

.tuo-ekatetarepootelbanE a 0=seY1=oN

:)c+b+a(

D6

.erotsetarepootelbanE b 0=seY2=oN

.llaceretarepootelbanE c 0=seY4=oN

.yalpsidesreveretarepootelbanE a 0=seY1=oN :

)b+a(D

5.OMEM-JetarepootelbanE b 2=seY0=oN

.noitisopemohetarepootelbanE a 0=seY1=oN :

)b+a(D

4.egnahcedomyalpsidetarepootelbanE b 0=seY2=oN

"0"syawlA ;D

3

.noitcasnartsihtfodiovllaetarepootelbanE0=seY4=oN

:D

2

.tpiecersihtfopotehtmorfdiovllaetarepootelbanE0=seY1=oN

:D

1

Record 07-067

Page 203: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

203QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

.ecirpetarepootelbanE a 0=seY1=oN

:)c+b+a(

D21

.oNULPetarepootelbanE b 0=seY2=oN

.oNtnemtrapedbusetarepootelbanE c 0=seY4=oN

.oNtnemtrapedetarepootelbanE a 0=seY1=oN :

)b+a(D

11.oNtsiletarepootelbanE b 0=seY2=oN

.ULPhcuotetarepootelbanE a 0=seY1=oN

:)c+b+a(

D01

.tnemtrapedhcuotetarepootelbanE b 0=seY2=oN

.tnemtrapedbushcuotetarepootelbanE c 0=seY4=oN

.tsilhcuotetarepootelbanE0=seY1=oN

:D

9

"0"syawlA ;;;;D

8D

7D

6D

5

"0"syawlA ;;;;D

4D

3D

2D

1

Record 08-067

Page 204: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

204

Program 6

noitpircseD eciohC margorPedoc

.1puorgegnarraetarepootelbanE a 0=seY1=oN

:)c+b+a(

D21

.2puorgegnarraetarepootelbanE b 0=seY2=oN

.3puorgegnarraetarepootelbanE c 0=seY4=oN

.4puorgegnarraetarepootelbanE a 0=seY1=oN

:)c+b+a(

D11

.5puorgegnarraetarepootelbanE b 0=seY2=oN

.6puorgegnarraetarepootelbanE c 0=seY4=oN

.7puorgegnarraetarepootelbanE a 0=seY1=oN

:)c+b+a(

D01

.8puorgegnarraetarepootelbanE b 0=seY2=oN

.9puorgegnarraetarepootelbanE c 0=seY4=oN

.01puorgegnarraetarepootelbanE0=seY1=oN

:D

9

"0"syawlA ;;;;D

8D

7D

6D

5

"0"syawlA ;;;;D

4D

3D

2D

1

Record 09-067

Page 205: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

205QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

.troperXyliadeussiotelbanE a 0=seY1=oN :

)b+a(D

21.troperZyliadeussiotelbanE b 0=seY2=oN

.troperX1cidoirepeussiotelbanE a 0=seY1=oN :

)b+a(D

11.troperZ1cidoirepeussiotelbanE b 0=seY2=oN

.troperX2cidoirepeussiotelbanE a 0=seY1=oN :

)b+a(D

01.troperZ2cidoirepeussiotelbanE b 0=seY2=oN

.troperXelifnoitadilosnoceussiotelbanE a 0=seY1=oN :

)b+a(D

9.troperZelifnoitadilosnoceussiotelbanE b 0=seY2=oN

.troper1Z/XhctabeussiotelbanE a 0=seY1=oN

:)c+b+a(

D8

.troper2Z/XhctabeussiotelbanE b 0=seY2=oN

.troper3Z/XhctabeussiotelbanE c 0=seY4=oN

.troper4Z/XhctabeussiotelbanE a 0=seY1=oN

:)c+b+a(

D7

.troper5Z/XhctabeussiotelbanE b 0=seY2=oN

.troper6Z/XhctabeussiotelbanE c 0=seY4=oN

.troper7Z/XhctabeussiotelbanE a 0=seY1=oN

:)c+b+a(

D6

.troper8Z/XhctabeussiotelbanE b 0=seY2=oN

.troper9Z/XhctabeussiotelbanE c 0=seY4=oN

.troper01Z/XhctabeussiotelbanE0=seY1=oN

:D

5

.troperXrotarepoeussiotelbanE a 0=seY1=oN :

)b+a(D

4.troperZrotarepoeussiotelbanE b 0=seY2=oN

"0"syawlA ;;D

3D

2

.elifybtroperZ/XeussiotelbanE a 0=seY1=oN

:)c+b+a(

D1

.troperZ/XlaudividnieussiotelbanE b 0=seY2=oN

.troperZ/XlaudividnirehtoeussiotelbanE c 0=seY4=oN

Record 10-067

Page 206: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

206

Program 6

7-2-5-2. Clerk detail

0001-030 0001-000 GROSS — Record No./File No./Detailed total record No./0002-030 0002-000 NET File No./Character0003-030 0003-000 CAID

Page 207: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

207QT-2000 Programming Manual

7-2-6. Key feature

7-2-6-1. PLU

PLU0001 0001-004 — PLU descriptor/Record No./File No.000000000000 — Elementary program †

11-066 000000 — Refer to the record 11-066 †

12-066 000000 — Refer to the record 12-066 †

13-066 0000 — Refer to the record 13-066 †

14-066 0 — Refer to the record 14-066 †

15-066 @0.00 — Unit price16-066 00 — Refer to the record 16-066 †

17-066 00 — Refer to the record 17-066 †

20-066 0000 — Refer to the record 20-066 †

21-066 00000000 — Refer to the record 21-066 †

PLU0002 0002-004

7-2-6-2. PLU 2nd unit price

PLU0001 0001-054 — PLU 2nd @ descriptor/Record No./File No.000000000000 — Elementary program †

11-066 000000 — Refer to the record 11-066 †

PLU0002 0002-004000000000000

11-066 000000PLU0003 0003-004

7-2-6-3. Subdepartment

SUBDEPT01 0001-003 — Subdepartment descriptor/Record No./File No.000000000000 — Elementary program †

11-066 000000 — Refer to the record 11-066 †

15-066 @0.00 — Unit price16-066 00 — Refer to the record 16-066 †

17-066 00 — Refer to the record 17-066 †

20-066 0000 — Refer to the record 20-066 †

21-066 00000000 — Refer to the record 21-066 †

SUBDEPT02 0002-003

7-2-6-4. Department

DEPT01 0001-005 — Department descriptor/Record No./File No.000000000000 — Elementary program †

11-066 000000 — Refer to the record 11-066 †

15-066 @0.00 — Unit price16-066 00 — Refer to the record 16-066 †

17-066 00 — Refer to the record 17-066 †

20-066 0000 — Refer to the record 20-066 †

21-066 00000000 — Refer to the record 21-066 †

DEPT02 0002-005† Refer to the following record formats.

Page 208: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

208

Program 6

noitpircseD eciohC margorPedoc

)@dn2ULProfevitceffetoN(:lortnocmetielgniS3=tpiecermetielgniS,0=tpiecerlamroN

tnacifingiSrebmun

:D

21

)@dn2ULProfevitceffetoN(1sutatsmetievitceleS a 0=oN1=seY :

)b+a(D

11)@dn2ULProfevitceffetoN(2sutatsmetievitceleS b 0=oN2=seY

)ULProfevitceffeylnO(noitaraperp/tnemidnoc/lamroN2=noitaraperP,1=tnemidnoC,0=metilamroN

tnacifingiSrebmun

:D

01

"0"syawlA ;D

9

:iD/uE5~1sutatselbaxaT

tnacifingiSrebmun

:)c+b+a(

D8

:eropagniS,.S.U1sutatselbaxaT a 0=oN

1=seY

2sutatselbaxaT b 0=oN2=seY

3sutatselbaxaT c 0=oN4=seY

:adanaC4=4elbaxaT,3=3elbaxaT,2=2elbaxaT,1=1elbaxaT

6=4&1elbaxaT,5=3&1elbaxaT,4=2&1elbaxaT0=elbaxatnoN,7=elbaxatllA

tnacifingiSrebmun

)@dn2ULProfevitceffetoN(noitadilavelpitluM).elbissopsinoitadilavenoylno,"oN"fI( a 0=seY

1=oN :)b+a(

D7)ULProfevitceffeylnO(ULPnepO b 0=oN

4=seY

.ecirptinu0elbanE a 0=oN1=seY

:)c+b+a(

D6

)@dn2ULProfevitceffetoN(.ecirpevitagenelbanE b 0=oN2=seY

)@dn2ULProfevitceffetoN(hsaH c 0=oN4=seY

"0"syawlA ;D

5

.ecirptinuderetneyllaunamrof)LDL(noitatimiltigidwoL)@dn2ULProfevitceffetoN(

tnacifingiSrebmun

:D

4

"0"syawlA ;D

3

)@dn2ULProfevitceffetoN(1noissimmoC a 0=oN1=seY :

)b+a(D

1)@dn2ULProfevitceffetoN(2noissimmoC b 0=oN2=seY

"0"syawlA ;D

1

Elementary program

Page 209: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

209QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)@dn2ULPdnaULProf(rebmundrocertnemtapedbuskniLtnacifingiS

srebmun::

D6

D5

rebmundrocertnemtapedkniL)tnemtrapedbusdna@dn2ULPULProf(

tnacifingiSsrebmun

::D

4D

3

rebmundrocerpuorgkniLtnacifingiS

srebmun::

D2

D1

noitpircseD eciohC margorPedoc

)ULProfylno(edocmodnarULPtnacifingiS

srebmun:: ~ ::

D6

D5

D~2

D1

noitpircseD eciohC margorPedoc

)ULProfylno(rebmunelbatunemteStnacifingiS

srebmun::::

D4

D3

D2

D1

noitpircseD eciohC margorPedoc

)999.99~100.0(ytitnauqkcotstinU)."1"sastaert,"0"fI(.tnioplamicedhtiwretnE

)@dn2ULPdnaULProf(

tnacifingiSsrebmun

:: ~ ::D

21D

11~ D

9D

8

"0"syawlA ;D

7

)999.99~100.0(ytitnauqkcotsmumitpO)@dn2ULPdnaULProf(.tnioplamicedhtiwretnE

tnacifingiSsrebmun

:: ~ ::D

6D

5~ D

3D

2

"0"syawlA ;D

1

noitpircseD eciohC margorPedoc

.yllaunamecirptinugniretneroftimiltnuomahgiH)@dn2ULProfton(

tnacifingiSsrebmun

:: ~ ::D

6D

5~ D

2D

1

noitpircseD eciohC margorPedoc

)99~00(rebmundrocerretcarahcredrO)@dn2ULProfton(

tnacifingiSsrebmun

::D

2D

1

Record 11-066

Record 12-066

Record 13-066

Record 14-066

Record 15-066

Record 16-066

Page 210: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

210

Program 6

noitpircseD eciohC margorPedoc

)9~1(stpiecernoBforebmuN)@dn2ULProfton().deussisinoBon,"0"fI(

tnacifingiSrebmun

:D

1

noitpircseD eciohC margorPedoc

)PKrofevitceffeylno(rolocgnitnirpredrO)@dn2ULProfton(

0=kcalB1=deR

:D

4

.1#retnirpredroottuotnirP)@dn2ULProfton( a 0=oN

1=seY:

)c+b+a(D

3

.2#retnirpredroottuotnirP)@dn2ULProfton( b 0=oN

2=seY

.3#retnirpredroottuotnirP)@dn2ULProfton( c 0=oN

4=seY

.4#retnirpredroottuotnirP)@dn2ULProfton( a 0=oN

1=seY:

)c+b+a(D

2

.5#retnirpredroottuotnirP)@dn2ULProfton( b 0=oN

2=seY

.6#retnirpredroottuotnirP)@dn2ULProfton( c 0=oN

4=seY

.7#retnirpredroottuotnirP)@dn2ULProfton(

0=oN1=seY

:D

1

noitpircseD eciohC margorPedoc

)1(rebmundrocerpuorgnwodlluP)@dn2ULProfton(

tnacifingiSsrebmun

::D

8D

7

)2(rebmundrocerpuorgnwodlluP)@dn2ULProfton(

tnacifingiSsrebmun

::D

6D

5

)3(rebmundrocerpuorgnwodlluP)@dn2ULProfton(

tnacifingiSsrebmun

::D

4D

3

)4(rebmundrocerpuorgnwodlluP)@dn2ULProfton(

tnacifingiSsrebmun

::D

2D

1

Record 17-066

Record 20-066

Record 21-066

Page 211: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

211QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

.noitareponoitadilavecroF a 0=oN1=seY :

)b+a(D

01

tnuomarofstigidowttsalno)57,05,52,00ot(noitcirtseR)gnidnuorhsinaDni>HSAC<rofylnO(derednet b 0=oN

4=seY

"0"syawlA ;D

9

.gnitnirppilshctabecroF a 0=oN1=seY

:)c+b+a(

D8

.)>KCEHC<rofylnO(gnitnirptnemesrodnekcehcecroF b 0=oN2=seY

.)>KCEHC<rofylnO(gnitnirpkcehcecroF c 0=oN4=seY

tnemyaplaitrapafoyrtnetibihorP a 0=oN1=seY

:)c+b+a(

D7

.derednettnuomaehtfoyrtneehttibihorP b 0=oN2=seY

.derednettnuomaehtfoyrtneecroF c 0=oN4=seY

.nwodkaerbTAVtnirP a 0=oN1=seY

:)c+b+a(

D6

)>KCEHC<rofylnO(noissimmocgnihsackcehC1 tnuomanaesU 2 etaraesU

b 0=tnuomA2=etaR

tnuomanoitadilaV1 tnuomalatotbustnirP 2 derednettnuomatnirP

c 0=latotbuS4=redneT

"0"syawlA ;D

5

gnirednetdnalatotbusrofnoitacificepstimiltnuomahgiHstnuoma

mumixaM)9~0(eulav ::

D4

D3forebmuN

)9~0(sorez

.eudtnuomaegnahcrofnoitacificepstimiltnuomahgiH

mumixaM)9~0(eulav ::

D2

D1forebmuN

)9~0(sorez

7-2-6-5. Function key

CASH 000000000000 — Key descriptor/ParameterCHARGE 000000000000CREDIT 000000000000%+ 000000000000CLEAR 000000000000PGM MODE 000000000000

Programming for cash, charge, credit and check

Page 212: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

212

Program 6

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

.noitareponoitadilavecroF0=oN1=seY

:D

01

"0"syawlA ;D

9

.gnitnirppilshctabecroF a 0=oN1=seY :

)b+a(D

8.desserpsiyekehtnehwrewardnepO b 0=oN2=seY

"0"syawlA ;D

7

.nwodkaerbTAVtnirP a 0=oN1=seY :

)b+a(D

6egrahcecivreS

1 tnuomanaesU 2 etaraesUb 0=tnuomA

2=etaR

"0"syawlA ;;;;;D

5D

4D

3D

2D

1

noitpircseD eciohC margorPedoc

yek"llacerretcarahc"ehtretfaegnahcedomrokrelcwollA)yek"llacerretcarahc"rofylnoevitceffe(.noisserped

0=seY1=oN :

D7.retnirptpiecerselasotsretcarahctnirP

0=seY2=oN

)99~10(.oNdrocerretcarahcredrO)gnimmargorpsraelc"00"(

tnacifingiSrebmun

:D

6

tnacifingiSrebmun

:D

5

)retnirpnehctikrofylnoevitceffe(rolocgnitnirP0=kcalB

1=deR:D

4

.1retnirpredrootsretcarahctnirP a 0=oN1=seY

:)c+b+a(

D3

.2retnirpredrootsretcarahctnirP b 0=oN2=seY

.3retnirpredrootsretcarahctnirP c 0=oN4=seY

.4retnirpredrootsretcarahctnirP a 0=oN1=seY

:)c+b+a(

D2

.5retnirpredrootsretcarahctnirP b 0=oN2=seY

.6retnirpredrootsretcarahctnirP c 0=oN4=seY

.7retnirpredrootsretcarahctnirP0=oN1=seY

:D

1

Programming for new balance

Programming for character print

Page 213: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

213QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)9~0(gnitnirperofebsenildeefkcabforebmuNtnacifingiS

rebmun:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

;rebmunkrelC1 rebmunyromeM 2 rebmunterceskrelC

1 0=2 1=

:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

.gnirrefsnartelbatelihwskcehcddaotwollA0=oN1=seY :

)b+a(D

7.rebmunremotsucehtrefsnarT0=seY2=oN

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

noitadilavelpitluM).elbissopsignitnirpnoitadilavenoylno,"oN"fI(

0=seY4=oN

:D

11

"0"syawlA ;;;;D

01D

9D

8D

7

"0"syawlA ;;;D

6D

5D

4

ecirptinuderetneyllaunamrof)LDH(noitatimiltigidhgiHtnacifingiS

rebmun:D

3

"0"syawlA ;;D

2D

1

Programming for check print

Programming for clerk transfer

Programming for table transfer

Programming for tip

Page 214: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

214

Program 6

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

.noitareponoitadilavecroF0=oN1=seY

:D

01

"0"syawlA ;;;D

9D

8D

7

"0"syawlA ;;D

6D

5

stnuomagniretnerofnoitacificepstimiltnuomahgiH

mumixaM)9~0(eulav ::

D4

D3forebmuN

)9~0(sorez

"0"syawlA ;;D

2D

1

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

)ecnaussitpiecerretfaevitceffeylno(.noitareponoitadilavecroF0=oN1=seY

:D

01

"0"syawlA ;;;D

9D

8D

7

"0"syawlA ;;D

6D

5

stnuomagniretnerofnoitacificepstimiltnuomahgiH

mumixaM)9~0(eulav ::

D4

D3forebmuN

)9~0(sorez

"0"syawlA ;;D

2D

1

Programming for loan, pick up

Programming for received on account, paid out

Page 215: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

215QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

noitadilavelpitluM).elbissopsignitnirpnoitadilavenoylno,"oN"fI(

0=seY4=oN

:D

11

"0"syawlA ;;D

01D

9

:iD/uE)xat-noNsnaem"0"(5~1sutatselbaxaT

tnacifingiSrebmun

:)c+b+a(

D8

:eropagniS,.S.U1sutatselbaxaT a 0=oN

1=seY

2sutatselbaxaT b 0=oN2=seY

3sutatselbaxaT c 0=oN4=seY

:adanaC4=4elbaxaT,3=3elbaxaT,2=2elbaxaT,1=1elbaxaT

7=4&1elbaxaT,6=3&1elbaxaT,5=2&1elbaxaT0=elbaxatnoN,8=elbaxatllA

tnacifingiSrebmun

)ylnoNPC,–(.ecnalabtidercwollA1=seY0=oN

:D

7

"0"syawlA ;;D

6D

5

.>latotbuS<retfanoitarepoyekwollA a 0=seY1=oN :

)b+a(D

7.noitartsigermetiretfanoitarepoyekwollA b 0=seY4=oN

ecirptinuderetneyllaunamrof)LDH(noitatimiltigidhgiHtnacifingiS

rebmun:D

3

:sutatsnoissimmoC0=enoN,2=2noissimmoC,1=1noissimmoC

tnacifingiSrebmun

:D

2

"0"syawlA ;D

1

Programming for +, –, coupon

Page 216: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

216

Program 6

noitpircseD eciohC margorPedoc

noitadilavelpitluM).elbissopsignitnirpnoitadilavenoylno,"oN"fI(

0=seY4=oN

:D

11

"0"syawlA ;;D

01D

9

:iD/uE)xaT-noNsnaem"0"(5~1sutatselbaxaT

tnacifingiSrebmun

:)c+b+a(

D8

:eropagniS,.S.U1sutatselbaxaT a 0=oN

1=seY

2sutatselbaxaT b 0=oN2=seY

3sutatselbaxaT c 0=oN4=seY

:adanaC4=4elbaxaT,3=3elbaxaT,2=2elbaxaT,1=1elbaxaT

7=4&1elbaxaT,6=3&1elbaxaT,5=2&1elbaxaT0=elbaxatnoN,8=elbaxatllA

tnacifingiSrebmun

.edirrevolaunamwollA a 0=seY2=oN :

)b+a(D

7elbaxatllA b 4=seY0=oN

.>TS/IS<retfanoitarepoyekwollA0=seY1=oN

:D

6

:gnidnuoR2=pudnuor,1=ffotuc,0=ffodnuoR

tnacifingiSrebmun

:D

5

.>latotbuS<retfanoitarepoyekwollA a 0=seY1=oN :

)b+a(D

4.noitartsigermetiretfanoitarepoyekwollA b 0=seY4=oN

"0"syawlA ;D

3

:sutatsnoissimmoC0=enoN,2=2noissimmoC,1=1noissimmoC

tnacifingiSrebmun

:D

2

"0"syawlA ;D

1

Programming for %-, %+

Page 217: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

217QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

”0“syawlA ;;D

21D

3

).deteledebnacenilaylno,detcelessioNnehW(eteleDmetI1=seY0=oN

:D

2

.nosaerdiovtceleS4=seY0=oN

:D

1

noitpircseD eciohC margorPedoc

)9~0(gnitnirperofebdeefkcab-otuaforebmuneniLtnacifingiS

rebmun:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

)noitatimilonsnaem"0"(gnitnirpnoitadilavforebmunelbawollAtnacifingiS

)9~0(rebmun:D

11

)ecnaussitpiecerretfaevitceffeylno(.noitareponoitadilavecroF0=oN1=seY

:D

01

"0"syawlA ;;D

9D

8

noitubirttayeK0=+OPED1=–OPED

:D

7

.rewardhsacnepO0=oN1=seY

:D

6

:noitinifedaideM3=tiderc,2=kcehc,1=egrahc,0=hsaC

tnacifingiSrebmun

:D

5

stnuomagniretnerofnoitacificepstimiltnuomahgiH

mumixaM)9~0(eulav ::

D4

D3forebmuN

)9~0(sorez

"0"syawlA ;;D

2D

1

Programming for deposit+, deposit–

Programming for void

Programming for check endorsement

Page 218: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

218

Program 6

noitpircseD eciohC margorPedoc

)9~0(stpiecertsopforebmunmumixaM).tpiecertsop1snaem"0"(

tnacifingiSrebmun

:D

21

"0"syawlA ;;;;D

11D

01D

9D

8

:tpiecertseugdnatpiecertsopfomroF1 ,tuotnirP 2 yalpsiD

a 1 0=2 2= :

)b+a(D

7.tpiecertseugnoemittnerructnirP b 4=seY0=oN

.kcehcdezilanifraelC1=oN0=seY

:D

6

.noitcasnart/noitazilaitinikrelcehtretfatpiecertsopatuotnirP2=oN0=seY

:D

5

"0"syawlA ;;D

4D

3

:)01~00(egassemmottobtseugforebmuneniL).egassemmottobonsnaem"00"(

tnacifingiSrebmun

::D

2D

1

noitpircseD eciohC margorPedoc

sanoitartsigerddanonretfaegnahckrelcroegnahcedomwollA.noitcasnarttsrif

1=seY0=oN

:D

7

:)99~00(rebmundrocerretcarahcredrO).gnittesonsnaem"00"(

tnacifingiSrebmun

::D

6D

5

rolocgnitnirpredrO1=deR0=kcalB

:D

4

.1#retnirpredrOottuotnirP a 1=seY0=oN

:)c+b+a(

D3

.2#retnirpredrOottuotnirP b 2=seY0=oN

.3#retnirpredrOottuotnirP c 4=seY0=oN

.4#retnirpredrOottuotnirP a 1=seY0=oN

:)c+b+a(

D2

.5#retnirpredrOottuotnirP b 2=seY0=oN

.6#retnirpredrOottuotnirP c 4=seY0=oN

.7#retnirpredrOottuotnirP1=seY0=oN

:D

1

Programming for receipt

Programming for #, #/NS

Page 219: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

219QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

:dohtemtupnI,1=tnemecalpertibihorP,0=tnemecalperwollA

2=eulavretneddA

tnacifingiSrebmun

:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

.edomGERninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D21

.edomFERninoitarepoelbanE b 0=seY2=oN

.edom–GERninoitarepoelbanE c 0=seY4=oN

.edom1MGPninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D11

.edom2MGPninoitarepoelbanE b 0=seY2=oN

.edom3MGPninoitarepoelbanE c 0=seY4=oN

.edom4MGPninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D01

.edom5MGPninoitarepoelbanE b 0=seY2=oN

.edom6MGPninoitarepoelbanE c 0=seY4=oN

.edom7MGPninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D9

edomtroprIninoitarepoelbanE b 0=seY2=oN

.edomMGPotuAninoitarepoelbanE c 0=seY4=oN

.edomZ/XninoitarepoelbanE a 0=seY1=oN

:)c+b+a(

D8

.edomreganaMninoitarepoelbanE b 0=seY2=oN

.edomnoitadilosnoC/noitcelloCninoitarepoelbanE c 0=seY4=oN

rebmuneliftnemegnarrAtnacifingiS

srebmun:::

D7

D6

D5

rebmunelbattnemegnarrAtnacifingiS

srebmun::::

D4

D3

D2

D1

Programming for arrangement

Programming for customer

Page 220: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

220

Program 6

noitpircseD eciohC margorPedoc

)4~1,0(.lobmystnuomaenifeD).lobmysycnerruclacolsnaem"0"(

tnacifingiSrebmun

:D

7

)3~1,0(.rezilatotycnerrucngierofenifeD).rezilatotonsnaem"0"(

tnacifingiSrebmun

:D

6

:gnidnuoR2=pudnuor,1=ffotuc,0=ffodnuoR

tnacifingiSrebmun

:D

5

"0"syawlA ;D

4

:)2~0(edomyratenoM00º ,2= 0º ,1= 0 0=

tnacifingiSrebmun

:D

3

lamicedroflobmysyratenoM a 0=lamiceD1=ammoC :

)b+a(D

2rotarapesroflobmysyratenoM b 0=ammoC4=lamiceD

)2~0(rebmunrewardgningissA).1rewardsnaem"0"(

tnacifingiSrebmun

:D

1

noitpircseD eciohC margorPedoc

ehtfogninnigebehtmorfgnitnirphctabpilsecroF).noitcnuflarenegybdellortnoc,"oN"fI(.noitcasnart a 1=seY

0=oN :)b+a(

D7.pilsnoemittnerructnirP b 4=seY

0=oN

.kcehcdezilanifraelC1=oN0=seY

:D

6

"0"syawlA ;;;D

5D

4D

3

"0"syawlA ;;D

2D

1

noitpircseD eciohC margorPedoc

)5~1,0(sutatselbaxaT).1elbaxatsnaem"0"(

tnacifingiSrebmun

:D

8

"0"syawlA ;;;;D

7D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

Programming for currency exchage

Programming for slip

Programming for T/S, TAST

Page 221: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

221QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

)8~1,0(.rebmunteehsunemgningissaenifeD).enoybenodengissaerasteehsunem,"0"tesuoyfI(

tnacifingiSrebmun

:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

"0"syawlA ;;;D

21D

11D

01

"0"syawlA ;;D

9D

8

.yroslupmocrebmunremotsucesaeleR a 0=seY1=oN

:)c+b+a(

D7

.yroslupmocrebmunelbatesaeleR b 0=seY2=oN

.yroslupmocrebmunkcehcesaeleR c 0=seY4=oN

ehtezilanifnacuoy",seY"fI(.rorreecnalabtidercesaeleR).evitagensilatotbusehtfinevenoitcasnart a 0=seY

1=oN :)b+a(

D6.yroslupmoctpiecertseugesaeleR b 0=seY

4=oN

.yroslupmocnoitadilavesaeleR a 0=seY1=oN

:)c+b+a(

D5

.yroslupmoctnemesrodnekcehcesaeleR b 0=seY2=oN

.yroslupmoctnirpkcehcesaeleR c 0=seY4=oN

.yroslupmoctnirphctablaunampilsesaeleR0=seY4=oN

:D

4

.yroslupmocnwodyatsesaeleR a 0=seY1=oN

:)c+b+a(

D3

.yroslupmoctnirpnehctikesaeleR b 0=seY2=oN

.yroslupmocrebmuntaesesaeleR c 0=seY4=oN

.yroslupmocnoitaralcedpitesaeleR a 0=seY1=oN :

)b+a(D

2.yroslupmoctuo-ekat/ni-taeesaeleR b 0=seY2=oN

"0"syawlA ;D

1

Programming for menu

Programming for open 2

Page 222: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

222

Program 6

noitpircseD eciohC margorPedoc

)metsysDCLlaudylnoevitceffE(.DCLtegratenifeD0=noitinifedoN,2=DCLthgiR,1=DCLtfeL

tnacifingiSrebmun

:D

21

"0"syawlA ;;;;D

11D

01D

9D

8

"0"syawlA ;;;D

7D

6D

5

)9999~0000(rebmunterceskrelC).rebmuntercesonsnaem"0000"(

tnacifingiSsrebmun

::::D

4D

3D

2D

1

noitpircseD eciohC margorPedoc

.troperenola-dnatseussI/.tropernoitadilosnoceussI a 1=noitadilosnoC0=enola-dnatS :

)b+a(D

7.tropertnirP/.troperyalpsiD b 2=yalpsiD0=tnirP

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

noitadilavelpitluM).elbissopsignitnirpnoitadilavenoylno,"oN"fI(

0=seY4=oN

:D

11

"0"syawlA ;;;D

01D

9D

8

"0"syawlA ;;D

7D

6

)ylnoTS(.tnuomaxatno-ddaedulcnI a 0=seY2=oN :

)b+a(D

5.desserpsiyeknehwtnirP b 4=seY0=oN

"0"syawlA ;;;;D

4D

3D

2D

1

Programming for clerk number

Programming for operator X/Z

Programming for subtotal, merchandise subtotal

Page 223: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

223QT-2000 Programming Manual

noitpircseD eciohC margorPedoc

"0"syawlA ; ~;D

21D

2

:noitallecnacfoegnarA1 /noitallecnacetelpmoC 2 ylnotpiecertnerruC

a 2 0=1 1= :

)b+a(D

1.deretsigersitielihwknilnwodllup/unemtestcerroC b 0=oN2=seY

noitpircseD eciohC margorPedoc

tropertnirP/.troperyalpsiD2=yalpsiD

0=tnirP:D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

noitpircseD eciohC margorPedoc

.puorgunemnwodllupgniknilfo.oNdroceRtnacifingiS

srebmun::

D2

D1

noitpircseD eciohC margorPedoc

)ylno>X<dnanoBnetteK(:erudecorpnoitacilpitluM1 ytitnauQ × ,tnuomA 2 tnuomA × ytitnauQ

1 0=2 1=

:D

6

:gnidnuoR2=pudnuor,1=ffotuc,0=ffodnuoR

tnacifingiSrebmun

:D

5

"0"syawlA ;;;;D

4D

3D

2D

1

noitpircseD eciohC margorPedoc

:)2,1,0(sutatsmetievitceleS2=2metievitceles,1/0=1metievitceleS

tnacifingiSrebmun

:D

11

"0"syawlA ;;;;D

01D

9D

8D

7

"0"syawlA ;;;D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

Programming for multiplication, quantity/for, square, cube, Ketten Bon

Programming for selective item subtotal

Programming for open check

Programming for list

Programming for cancel

Page 224: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

224

Program 6

noitpircseD eciohC margorPedoc

:eropagniS,.S.U1xattpmexE a 1=oN

0=seY

:)c+b+a(

D8

2xattpmexE b 2=oN0=seY

3xattpmexE c 4=oN0=seY

:adanaC0=)4~1xat(llatpmexE

,3=3xattpmexE,2=2xattpmexE,1=1xattpmexE,5=2&1xattpmexE,4=4xattpmexE

7=4&1xattpmexE,6=3&1xattpmexE

tnacifingiSrebmun

"0"syawlA ;;;;D

7D

6D

5D

4

"0"syawlA ;;;D

3D

2D

1

Programming for clock-in/clock-out

noitpircseD eciohC margorPedoc

"0"syawlA ;;;;D

21D

11D

01D

9

"0"syawlA ;;;;D

8D

7D

6D

5

"0"syawlA ;;D

4D

3

:sesufoesopropehT0=tuo-kcolcdnani-kcolchtobesU

1=ni-kcolcylnoesU2=tuo-kcolcylnoesU

tnacifingiSrebmun

:D

2

.desserperasyektuo-kcolcroni-kcolcnehwtnirP0=seY1=oN

:D

1

Programming for tax exempt

Page 225: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

225QT-2000 Programming Manual

Programming for break-in/break-out

Programming for eat-in/take-out

noitpircseD eciohC margorPedoc

"0"syawlA ;;;;D

21D

11D

01D

9

"0"syawlA ;;;;D

8D

7D

6D

5

"0"syawlA ;;D

4D

3

:sesufoesopropehT0=tuo-kaerbdnani-kaerbhtobesU

1=ni-kaerbylnoesU2=tuo-kaerbylnoesU

tnacifingiSrebmun

:D

2

"0"syawlA :D

1

noitpircseD eciohC margorPedoc

"0"syawlA ;;;;D

21D

11D

01D

9

:eropagniS,.S.U1xattpmexE a 1=oN

0=seY

:)c+b+a(

D8

2xattpmexE b 2=oN0=seY

3xattpmexE c 4=oN0=seY

:adanaC0=)4~1xat(llatpmexE

,3=3xattpmexE,2=2xattpmexE,1=1xattpmexE,5=2&1xattpmexE,4=4xattpmexE

7=4&1xattpmexE,6=3&1xattpmexE

tnacifingiSrebmun

"0"syawlA ;;D

7D

6

.desserpsiyekehtnehwtnirP0=tnirptoN

1=tnirP:D

5

"0"syawlA ;;;;D

4D

3D

2D

1

Page 226: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

226

Program 6

Programming for store

noitpircseD eciohC margorPedoc

"0"syawlA ;;;D

21D

11D

01

"0"syawlA ;;;D

9D

8D

7

)tnirP(ECIOVNIro)tnirPtoN(LACSIFTAV0=tnirPtoN

1=tnirP:D

6

"0"syawlA ;;;D

5D

4D

3

"0"syawlA ;;D

2D

1

Page 227: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

227QT-2000 Programming Manual

7-2-7. Keyboard

1-------------------------------------- — Menu sheet number001.RCT 0001 002 073 — Key descriptor/Record No./File No./Function code002.NEW/OLD 0002 002 093003.RC 0003 002 091 : :168.PLU0093 0093 004 0632--------------------------------------001.RCT 0001 002 073 : :

7-2-8. Memory allocation

FILE001 26 59 DL P1 P2 WK — File No./Length/Number of records/DL/P1/P2/WK 10 CL CL CL — CL/CL/CLFILE002 38 70 DL P1 P2 WK DL: Daily total, P1: Periodic 1 total 10 CL CL CL P2: Periodic 2 total, P2: Periodic 2 totalFILE003 54 4 DL -- -- -- CL: Consolidation area of above file : "--" means no file allocation. :FILE020 24 3 DL :FILE045 30 128 *DL — "*" means file is allocated in D drive. :RAM 22688 131040 — Remaining RAM capacity(C: drive)/(D: drive)

Page 228: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

228

Program 6

Page 229: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

229QT-2000 Programming Manual

8. Program 7 ................................................................................... 2308-1. Program backup ......................................................................................... 2308-2. Program restore ......................................................................................... 2318-3. J-Memo clear ............................................................................................. 2318-4. Data buckup list ......................................................................................... 232

Page 230: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

230

Program 7

8. Program 7

8-1. Program backup

Operation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> repeatedly to assign Program 7 mode.

3. Select “1.Data Backup” and press the <YES> key.

4. Select the data you want to backup in the menu and press the<YES> key.

5. Data is saved after pressing the <YES> key.

Note:Depending on changing the memory allocation, all data are not backed up even if backingup all data.

0.00

P7 C01 15-12-97 12:34 000000

PGM7 1.Data Backup 2.Data Restore 3.J-MEMO Reset

0.00

Data Backup

Data Backup 1.All Data 2.All Programs 3.All Totalizer

0.00

All Programs

All Programs

OK? YES

Page 231: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

231QT-2000 Programming Manual

8-2. Program restore

Operation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> repeatedly to assign Program 7 mode.

3. Select “2.Data Restore” and press the <YES> key.

4. Data is uploaded after pressing the <YES> key

8-3. J-Memo clear

Operation:

1. Sign on a clerk (if necessary).2. Press <PGM MODE> repeatedly to assign Program 7 mode.

3. Select “3.J-MEMO Reset” and press the <YES> key.

4. All data is cleared after pressing the <YES> key.

0.00

P7 C01 15-12-97 12:34 000000

PGM7 1.Data Backup 2.Data Restore 3.J-MEMO Reset

0.00

Data Restore

Data Restore

OK? YES

0.00

J-MEMO Reset

This procedure stops system maximum 60 sec. OK?

0.00

P7 C01 15-12-97 12:34 000000

PGM7 1.Data Backup 2.Data Restore 3.J-MEMO Reset

Page 232: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

232

Program 7

8-4. Data buckup list

eliF.oN

noitpircsedeliF atadllAllAMGP

llArezilatot

eliF.oN

noitpircsedeliF atadllAllAMGP

llArezilatot

409 rebmunevitucesnoC O ××××× ××××× 500 tnemtrapeD O O O

109 elbatnoitcennocmetsyS O O ××××× 501 )1latotcidoirep( O ××××× O

209 retemarapO/I O O ××××× 502 )2latotcidoirep( O ××××× O

309 noitcennocretnirP O O ××××× 503 )noitadilosnocyliad( O ××××× O

470 elbatyeK O O ××××× 504 )noitadilosnoc1cidoirep( O ××××× O

220 lortnoclareneG O O ××××× 505 )noitadilosnoc2cidoirep( O ××××× O

700 krelC O O ××××× 506 )krownoitadilosnoc( O ××××× O

030 knilliatedkrelC O O ××××× 600 puorG O O O

520 elbatxaT O O ××××× 601 )1latotcidoirep( O ××××× O

100 rezilatotdexiF O O O 602 )2latotcidoirep( O ××××× O

101 )1latotcidoirep( O ××××× O 603 )noitadilosnocyliad( O ××××× O

102 )2latotcidoirep( O ××××× O 604 )noitadilosnoc1cidoirep( O ××××× O

103 )noitadilosnocyliad( O ××××× O 605 )noitadilosnoc2cidoirep( O ××××× O

104 )noitadilosnoc1cidoirep( O ××××× O 606 )krownoitadilosnoc( O ××××× O

105 )noitadilosnoc2cidoirep( O ××××× O 900 selasylruoH O ××××× O

106 )krownoitadilosnoc( O ××××× O 901 )1latotcidoirep( O ××××× O

200 noitcnufeerF O O O 902 )2latotcidoirep( O ××××× O

201 )1latotcidoirep( O ××××× O 903 )noitadilosnocyliad( O ××××× O

202 )2latotcidoirep( O ××××× O 904 )noitadilosnoc1cidoirep( O ××××× O

203 )noitadilosnocyliad( O ××××× O 905 )noitadilosnoc2cidoirep( O ××××× O

204 )noitadilosnoc1cidoirep( O ××××× O 906 )krownoitadilosnoc( O ××××× O

205 )noitadilosnoc2cidoirep( O ××××× O 010 selasylhtnoM O ××××× O

206 )krownoitadilosnoc( O ××××× O 011 )1latotcidoirep( O ××××× O

300 tnemtrpapedbuS O O O 012 )2latotcidoirep( O ××××× O

301 )1latotcidoirep( O ××××× O 013 )noitadilosnocyliad( O ××××× O

302 )2latotcidoirep( O ××××× O 014 )noitadilosnoc1cidoirep( O ××××× O

303 )noitadilosnocyliad( O ××××× O 015 )noitadilosnoc2cidoirep( O ××××× O

304 )noitadilosnoc1cidoirep( O ××××× O 016 )krownoitadilosnoc( O ××××× O

305 )noitadilosnoc2cidoirep( O ××××× O 110 liatedkrelC O ××××× O

306 )krownoitadilosnoc( O ××××× O 111 )1latotcidoirep( O ××××× O

400 ULP O O O 112 )2latotcidoirep( O ××××× O

411 )1latotcidoirep( O ××××× O 113 )noitadilosnocyliad( O ××××× O

412 )2latotcidoirep( O ××××× O 114 )noitadilosnoc1cidoirep( O ××××× O

413 )noitadilosnocyliad( O ××××× O 115 )noitadilosnoc2cidoirep( O ××××× O

414 )noitadilosnoc1cidoirep( O ××××× O 116 )krownoitadilosnoc( O ××××× O

415 )noitadilosnoc2cidoirep( O ××××× O 210 nosaerdioV O O O

416 )krownoitadilosnoc( O ××××× O 211 )1latotcidoirep( O ××××× O

Page 233: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

233QT-2000 Programming Manual

eliF.oN

noitpircsedeliF atadllAllAMGP

llArezilatot

eliF.oN

noitpircsedeliF atadllAllAMGP

llArezilatot

212 )2latotcidoirep( O ××××× O 124 )noitadilosnoc1cidoirep( O ××××× O

213 )noitadilosnocyliad( O ××××× O 125 )noitadilosnoc2cidoirep( O ××××× O

214 )noitadilosnoc1cidoirep( O ××××× O 126 )krownoitadilosnoc( O ××××× O

215 )noitadilosnoc2cidoirep( O ××××× O 750 )1(CDI O O O

216 )krownoitadilosnoc( O ××××× O 751 )1latotcidoirep( O ××××× O

410 robaL/ylruoH O ××××× O 752 )2latotcidoirep( O ××××× O

411 )1latotcidoirep( O ××××× O 753 )noitadilosnocyliad( O ××××× O

412 )2latotcidoirep( O ××××× O 754 )noitadilosnoc1cidoirep( O ××××× O

413 )noitadilosnocyliad( O ××××× O 755 )noitadilosnoc2cidoirep( O ××××× O

414 )noitadilosnoc1cidoirep( O ××××× O 756 )krownoitadilosnoc( O ××××× O

415 )noitadilosnoc2cidoirep( O ××××× O 850 )2(CDI O O O

416 )krownoitadilosnoc( O ××××× O 851 )1latotcidoirep( O ××××× O

810 sisylanaelbaT O O O 852 )2latotcidoirep( O ××××× O

811 )1latotcidoirep( O ××××× O 853 )noitadilosnocyliad( O ××××× O

812 )2latotcidoirep( O ××××× O 854 )noitadilosnoc1cidoirep( O ××××× O

813 )noitadilosnocyliad( O ××××× O 855 )noitadilosnoc2cidoirep( O ××××× O

814 )noitadilosnoc1cidoirep( O ××××× O 856 )krownoitadilosnoc( O ××××× O

815 )noitadilosnoc2cidoirep( O ××××× O 950 )3(CDI O O O

816 )krownoitadilosnoc( O ××××× O 951 )1latotcidoirep( O ××××× O

910 emiTkroW O ××××× O 952 )2latotcidoirep( O ××××× O

911 )1latotcidoirep( O ××××× O 953 )noitadilosnocyliad( O ××××× O

912 )2latotcidoirep( O ××××× O 954 )noitadilosnoc1cidoirep( O ××××× O

913 )noitadilosnocyliad( O ××××× O 955 )noitadilosnoc2cidoirep( O ××××× O

914 )noitadilosnoc1cidoirep( O ××××× O 956 )krownoitadilosnoc( O ××××× O

915 )noitadilosnoc2cidoirep( O ××××× O 320 retcarahclaicepS O O ×××××

916 )krownoitadilosnoc( O ××××× O 420 redaehtropeR O O ×××××

020 latotdnarG O O O 620 puorgnwodlluP O O ×××××

021 )1latotcidoirep( O ××××× O 820 elbatunemteS O O ×××××

022 )2latotcidoirep( O ××××× O 920 Z/XhctaB O O ×××××

023 )noitadilosnocyliad( O ××××× O 130 knilmetiylruoH O O ×××××

024 )noitadilosnoc1cidoirep( O ××××× O 230 egassempils/tpieceR O O ×××××

025 )noitadilosnoc2cidoirep( O ××××× O 330 egassemesrodnE O O ×××××

026 )krownoitadilosnoc( O ××××× O 830 )1(puorgegnarrA O O ×××××

120 metIylruoH O ××××× O 140 tnirpkcehC O O ×××××

121 )1latotcidoirep( O ××××× O 740 ogolcihparG O O ×××××

122 )2latotcidoirep( O ××××× O 450 @dn2ULP O O ×××××

123 )noitadilosnocyliad( O ××××× O 260 reludehcS O O ×××××

Page 234: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

234

Program 7

eliF.oN

noitpircsedeliF atadllAllAMGP

llArezilatot

eliF.oN

noitpircsedeliF atadllAllAMGP

llArezilatot

560 retcarahcredrO O O ××××× 408 knilCDI O O ×××××

831 )2(puorgegnarrA O O ××××× 999 golrorremetsyS O ××××× ×××××

832 )3(puorgegnarrA O O ××××× 510 xednIkcehC O ××××× ×××××

833 )4(puorgegnarrA O O ××××× 060 liatedkcehC O ××××× ×××××

834 )5(puorgegnarrA O O ××××× 660 *krowliatedkcehC O ××××× ×××××

835 )6(puorgegnarrA O O ××××× 530 *reffubtnirP O ××××× ×××××

836 )7(puorgegnarrA O O ××××× 630 *reffubnoitartsigeR O ××××× ×××××

837 )8(puorgegnarrA O O ××××× 440 *reffubyalpsiD O ××××× ×××××

838 )9(puorgegnarrA O O ××××× 840 *reffubyromemlanruoJ O ××××× ×××××

839 )01(puorgegnarrA O O ××××× 730 *reffubdiovllA O ××××× ×××××

008 enoZemiT O O ××××× 340 *reffubyalpsidyromemlanruoJ O ××××× ×××××

108 eeyolpmE O O ××××× 360 *reffubCDI O ××××× ×××××

208 edocboJ O O ××××× 001 *reffubGOLD O ××××× ×××××

308 eludehcS O O ××××× 002 *reffubgolegnarrafotluseR O ××××× ×××××

.dedrocertoneraselifesehtfostnetnocehT*

Page 235: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

235

Index .................................................................................................................. 236Program 3 mode Hierarchy .............................................................................................. 239Program 2 mode Hierarchy .............................................................................................. 240Program 1 mode Hierarchy .............................................................................................. 240Program 6 mode Hierarchy .............................................................................................. 241

Page 236: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

236

Index

IndexA

Accumulate touch PLU menus 54Add mode 39Alert REG Buffer Near End 49Allow finalization operation when subtotal is zero 41Allow more than one transaction in RF mode 41Allow numeric entries 41Allow to operate Auto PGM 82Allow to operate Infrared 82Allow to operate n-th Menu 81Amount or rate to keys 158Arrangement 36, 124Arrangement control 88Arrangement control by range 100

B

Batch X/Z report 37

C

Calculate Price for detail 51Calculation type 60Cash 116Cashier detail 104Character print 117Character programming 132Character programming keyboard 132Character recall 117Charge 116Check 116Check endorsement 121Check print 58, 118Check tracking 52Clearing CHK/TBL No. 52, 53Clerk 52, 53, 72, 76, 78, 79, 80, 92, 195, 206Clerk control 80Clerk control by range 92Clerk features 78Clerk interrupt 52Clerk number 127Clerk transfer 118Commission rate 90Commission rate by range 102Communication 47Consecutive No. 39Copy program change to other teminals 47Copying PLU descriptors to PLU 2nd unit price 139, 157Coupon 120Credit 116Cube 128Currency exchage 125Customer 124

D

Data buckup list 232Delete RF items from guest receipt 41Department descriptors 137Department features 110Department unit price 154Deposit– 121Deposit+ 121Destination of accumulation for menu totalizing 54Display control 53Display Report 46

E

Employee 72, 191Endorsement message 147Error when actual stock less than minimum stock 41Error when actual stock less than zero 41

F

Fixed totalizer descriptors 143Flag clear QT-2000 terminal 14Follow memu total reset operation 54Follow the same QTY as main item 51Function control 1 83Function control 1 by range 95Function control 2 84Function control 2 by range 96Function control 3 85Function control 3 by range 97Function control 4 86Function control 4 by range 98Function control 5 87Function control 5 by range 99Function key descriptors 140

G

General feature 39General procedure of PLU, PLU 2nd@, subdepartment, 112GT character 147

H

Hourly sales 48

I

I/O parameter 64IDC Link 76, 194IDC link 76Initialize QT-2000 terminal 8Inputting characters by code 134Issue Post receipt when normal receipt is issued 41Item Consolidation 42Item descriptors 135Item type 107

Page 237: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

237

J

Job Code 71, 72, 192Journal control 49

K

Ketten Bon 128Key allocation 24Key location change 26Keyboard layout 27

L

Limit of number Plus, Minus, Premium, Discount key 40List 68, 71, 74, 77, 128, 129, 130Loan 119

M

Machine control 1 39Machine control 3 42Machine control 4 43Machine features 32Machine number 39Maximum Table Amount 60Memory allocation 16, 17, 19Menu 126Menu shift 1 54Menu shift 2 55Menu shift after Sign On 81Menu shift status/stay down 81Menu shift/2nd@ 81Menu shift/2nd@ by range 93Merchandise subtotal 127Message control 50Mode control 82Mode control by range 94Money declaration compulsory 41mory allocation 18Multiplication 128

N

Net total includes commission 40Net total includes tax 40New balance 117

O

Open 2 126Open check 128Operator X/Z 127Order character link 142Order color 107Order control 50Order Print #1 ~ #7 107Origin of reset data to be sent to the master 47Overwrite the J-Memo ring buffer 49

P

Paid out 119Perform stock QTY calculation 41Pick up 119PLU 2nd unit price 152PLU 2nd unit price descriptors 136PLU 2nd@ features 108PLU features 106PLU item descriptors 135PLU random code order 46PLU unit price 151PLU unit price and PLU 2nd unit price 153PLU/PLU 2nd@/subdepartment/department unit price 155PLU/subdepartment/department descriptors 138Post Entry 51Presetting date and time 150, 230Print additional items only 49Print control 44Print Monthly Sales Average 46Printer connection 67Printer definition 190Program read general procedure 160Program read report sample 161Programming hierchy of programming title 113Pulldown group 32

Q

Quantity/for 128

R

Random PLU 40Receipt 123Receipt Logo either graphic or text 50Receipt message 141Receipt type 107Received on account 119Remaining memory 16Report control 2 46Report headers 146Restrict (0 or 5) on the last digit 41Rounding 60Rounds %+ or %– operation 41

S

Schedule 72, 193Scheduler 56Selective item subtotal 128Sentinel amount 39Set menu table 34Set menu/condiment 51Slip 125SLIP/Guest 48Sort by department 42Sort by group 42Sort by group/dept with detail 42Special characters 144Square 128ST compulsory 41Stock result copy 47

Page 238: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

238

Index

Storage of TRG operation into journal memory 48, 49Subdepartment descriptors 136Subdepartment features 109Subdepartment unit price 154Subtotal 127, 128System connection 63

T

T/S 125Table analysis 59Table range 91Table range by range 103Table transfer 118TAST 125Tax Rate(%) 60Tax table 60Text recall message 142, 144Time & Attendance 69, 71, 72time zone 68, 70Tip 118Type of operator 79

U

Use LCD on right hand side 79

V

VAT recaluculate on X/Z report 46Void 121Void operation 79Void table 62

X

X/Z report control 89X/Z report control by range 101

Z

Zero-Skip on Report 46

Page 239: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

239

Program 3Machine feature

Clerk

Key feature

General function

Operation (individual)Range (by range)

(Individual)Range (by range)

(Individual)Range (by range)

Individual program

Pulldown groupSet menu tableArrangementBatch X/ZMachine control 1 ~ 4Print controlReport control 1, 2CommunicationHourly salesSLIP/GuestJ-memo controlMessage controlOrder controlSet menu/condimentCheck trackingClerk interruptDisplay controlMenu shift 1, 2SchedulerCheck printTable analysisTax tableVoid tableSystem connectionI/O parameterPrinter connectionTime ZoneTime & Attendance GeneralJob CodeEmployee & ScheduleHourly Item LinkIDC Link

Clerk featureClerk controlMenu shift/2ndMode controlAllowed function 1 ~ 5ArrangementReportCommission rateTable rangeClerk detail

PLUPLU 2nd @SubdepartmentDepartmentReceipt typeItem typeGroup linkDepartment linkSubdepartment linkTaxable statusCommissionSelective itemOrder colorOrder printer #1 ~ 7Order linkNo. of BonUnit stockMinimum stockSet menu tableList link #1 ~ 4Open PLUZero unit priceNegative priceHash itemHigh amount limitLow digit limitMultiple validationFunction key

Program 3 mode Hierarchy

Page 240: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

240

Index

Program 1

Program 2

Unit price/Qty

Item descriptor

Character & message

Range

Range

PLUPLU 2nd @PLU & PLU 2nd @SubdepartmentDepartmentPLU by rangePLU 2nd @ by rangeSubdepartment by rangeDepartment by rangePLU 2nd@ CopyAmount/Rate to key

PLUPLU 2nd @SubdepartmentDepartmentPLU by rangePLU 2nd @ by rangeSubdepartment by rangeDepartment by rangePLU –> 2nd @ copyCharacter & press key

Receipt/Slip messageText recallOrder character linkFixed totalizerGroup characterSpecial characterReport headerEndorse messageGT character

Program 1 mode Hierarchy

Program 2 mode Hierarchy

Page 241: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

241

ProgramProgram read reportUnit price & quantity

Item descriptor

Character & message

Machine feature

Clerk

Key feature

PLU unit pricePLU 2nd @Subdepartment unit priceDepartment unit priceFunction key rate/price

PLUPLU 2nd @SubdepartmentDepartmentFunction key

Receipt/Slip messageText recallOrder character linkFixed totalizer characterGroup characterSpecial characterReport headerEndorse messageGT character

Pulldown groupSet menu tableArrangementBatch X/ZGeneral featureSchedulerCheck printTable analysisTax tableVoid tableSystem connectionI/O parameterPrinter connectionTime zoneTime&AttendanceHourly item linkIDC link

Clerk featureClerk detail

PLU featurePLU 2nd @ featureSubdepartment featureDepartment featureFunction key feature

Keyboard

Memory allocation

Program 6 mode Hierarchy

Page 242: PM - isurplus.com.au QT-2000... · 2 Preface Document warranty The information contained in this document is subject to change without notice. CASIO Computer Co., Ltd. makes no warranty

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chomeShibuya-ku, Tokyo 151-8543, Japan

MO9807-A

Printed in JapanQT-2000 PGM*E