Vehicle Back-Up Camera & Monitor DVR KitPLCMTRDVR47

9’’ Display, Video Recording, Quad-View Ability,Night Vision, Waterproof Cams (For Truck, Van, Bus, Trailer)

www.PyleUSA.com2

Please read instructions carefully before installation and use. Installation should be performed by a professional installer.

NOTICEFor your safety, please do not watch videos on the monitor when driving. Except professional repair-men, do not modify the machine. lf the machine doesn‘t work, please consult customer services or send the machine to local maintenance departments.

WARNING: Please install this machine in the place where laws and regulations allows it, our company take no responsibility for illegal product installation.

ATTENTION:The machine may appear darkscreen phenomenon when starting up in the cold days, after power on and machine's temperature gradually rises up, the display screen would gradually return to normal.

APPLICATIONThis product adopts digital TFT color LCD of high de�nition real-time monitoring, stored in SD card; built-in DVR recording function with one single image or quad split images; supports 1way AV recording; built-in speaker and with remote control. The installation is convenient and the connection is simple.With no radiation, low comsumption, beautiful and vivid image, small size etc features, widely applied in universal car securityand monitor.

BUTTON FUNCTION

www.PyleUSA.com3

1. Labelling Mark2. MENU: Compound key in the settings menu, four split & DVR mode.3. CH 1: Direct channel CH 1 mode in split mode. In four split state its the menu minus. Menu up in DVR state, its the last page in the DVR video playback state is used to select videos.4. CH 2: Direct channel CH 2 mode in split mode. Menu plus in four split state. Drop down menu in DVR State. The next page in DVR video play back state, used to select videos.5. POWER: Monitor standby/switch ON6. CH3: It is the direct channel 3 mode in split mode, it is the down in the four split status menu, left in the DVR status menu, CH3 is the play button in DVR video.7. CH4: It is the direct channel 4 mode in split mode, UP in the four split status menu, right in DVR status status menu, and in DVR videos CH4 indicates “pause”.8. MODE: In four split screen, it is the cyclic switching of the mode 2 division, -3 segmentation, -4 segmentation. In DVR state, MODE is used to switch playback/video mode.9. Remote Control window.

BUTTON FUNCTION

8

www.PyleUSA.com4

1. Labelling Mark2. POWER: Compound key long press indicates that the monitor is standby /switched ON. Short press indicates four split/DVR screen switching3. MODE: Compound key short press indicates the loop switch of the split mode 2 - split 3 - split 4/ln the DVR state. MODE can switch to playback /video mode. Long press represents the conversion of the four division and the DVR mode4. CH1: It is the direct channel CH1 mode in split mode/In the four split state, it is menu minus/the menu up in the DVR state/ the last page in DVR video playback state, used to select videos.5. CH2: The direct channel CH2 mode in split mode/It is menu plus in the four split state/It is the menu down in the DVR state/ It is the next page in the DVR video playback state, used to select videos.6. Ch3: The direct channel 3 mode in split mode/down in the four split status menu/left in DVR status menu/in DVR video, CH3 is the play button7. Ch4: Direct channel 4 mode in split mode/It is up in the four split status menu/It is right in the DVR status menul In DVR videos. CH4 indicates pauses8. Remote Control Window

REMOTE CONTROL

POWER: Standby/boot button.you can achieve standby mode or boot modeDVR/AV: Toggle the DVR mode and the foursplit modeMODE1: In DVR mode. Used for loopswitching of video/playbackSETUP: In DVR mode. you can open the DVRsettings menuUP: Up directionMUTE: Mute switch. No power ampli�er. nosupportLEFT: Left direction

www.PyleUSA.com5

REC/ENTER: In DVR mode, video start (stop) / con�rm functionRIGHT: Right directionMENU: Screen display settings menuDOWN: Down directionMODE: Four split compound split mode switching. Cyclic switching of 2segmentation, 3 segmentation, 4 segmentationCH1: In the four split mode, use to switch directly to single channel 1VOL+: Volume increase. No power mode. No supportCH2: In the four split mode, use to switch directly to single channel 2CH3: In the four split mode, use to switch directly to single channel 3VOL-: Volume reduction. No power mode. No supportCH4: In the four split mode, use to switch directly to single channel 4

INSTRUCTION MANUALHow to set DVR video timeIn DVR mode, enter the DVR settings menu via remote control SETUP or panel MENU, and then click it again to enter the SETUP Options box as follows:

Press up and down to enter the INPUT item remote control. REC/ENTER to enter date setting. Remote control 'REC/ENTER' or panel. press CH3 to enter time setting. Change the time page up and down:

www.PyleUSA.com6

How to operate DVR videoIn DVR mode, remote control MODE1 or long press the keypad MODE to switch to burn mode, while the lower left corner of the white time display as shown

And then remote control REC / ENTER or monitor panel long press CH3for recording mode. The image began to burn, the upper left corner ofthe red dot will �ash as shown:

www.PyleUSA.com7

How to view DVR burn videosIn the DVR mode, remote control MODE1 or press the panel MODE to switch to view the recording mode, the upper left corner ofthe display has a black folder icon and the current video track display. You can press CH1/CH2 up and down button to select di�erent video �le. In the lower left corner; OK, play, pause icon and time displays, and then remote control REC / ENTER or panel press CH3 to con�rm the video playback:

CONNECTION4 PIN

www.PyleUSA.com8

MONITOR STANDARD INSTALLATION1. Remove the screw around then take out the monitor. Put U type bracket to the right place and adjust. Prepare 3 screws. (see below pictures)

2. Lock the bracket by screws. Put the monitor into the bracket. Adjust angle and locking it. (see below pictures)

3. Finish the installation. The adjustable angle is forwad 30° and backward 30°. User can adjust its preferred angle. (see below pic.)

www.PyleUSA.com9

Monitor lnstallation (Optional)1. Firstly �x the screws and fan-shaped bracket tight. (see below pictures)

2. Secondly put the metal buckle piece on the top of the fan-shaped bracket into the notch at the back of the monitor. (see below pictures)

3. Move the bracket to the proper location. (see below pictures)

Tapping screw or Machine screw with nut.

www.PyleUSA.com10

4. Fix the big screws of the bracket until to keep the monitor tight (see below pictures)

5. To change the direction or angle of the monitor, �rstly loosen the screws on the bottom of the bracket. Then move the monitor to the desired location then �x the screws on the bottom of the bracket again. (see below pictures)

PRODUCT MAINTENANCE 1. DO NOT install the products in a damp place2. Do not squeeze or scratch the product with sharp objects.3. Wipe the products with a soft cloth soaked with a small amount of mild detergent. When cleaning the TV, do not use polishing cloths, disinfectants or any kind of fuel or chemical cleaners such as alcohol and gasoline, etc.4. Unplug or turn o� the power if the unit is not in use.

Notice:Please obey the local laws to install the product at a right position. Our company is not responsible for the law issue caused by the illegal installation

www.PyleUSA.com11

ACCESSORY

www.PyleUSA.com12

INSTALLATION EXAMPLES

Monitor system used in truck, bus, express car, or special vehicle

www.PyleUSA.com13

PLCMTRDVR47Vehicle Back-Up Camera & Monitor DVR Kit - 9’’ Display,

Video Recording, Quad-View Ability, Night Vision, Waterproof Cams (For Truck, Van, Bus, Trailer)

Features: • DVR Dash-Cam Bundle Kit • Includes Monitor Display + Dual Cameras • Video Recording & File Saving via SD Memory Card Slot • Easily Save & Share �les via Computer • Ability to Connect Additional / External Cameras • Quad-View Display Ability: Choose to View 1, 2 or 4 Cameras On-Screen • Universal Mount: For All Vehicle Types • Night Vision Illumination • Auto White Balance & Image Adjustment • Includes All Necessary Cables & Wiring for Installation • Used for Car, Truck, Bus, Van, Trailer, Mobile Vehicle Applications

Technical Specs: • Monitor Type: LCD-TFT, 9.0’’ -inches • Monitor Screen Resolution: 800 x 480 Pixels • On-Screen Viewing Modes: Single Camera, Dual Camera, Quad 4-Way Camera • Recording Speeds: PAL 50 FPS, NTSC 60FPS • Back Light: LED, 400cd/m2 • Video Output: NTSC / PAL • Camera Marine Grade Rating: IP-69 • Viewing Angle: 170 Degree • Video System: PAL/NTSC Auto Switching • Image Sensor: 1/4’’ Color CMD

What’s in the Box: • Display Monitor • (2) Backup Cameras • Remote Control • Power & Wiring Harness

Backup Cameras: • Universal Exterior Mount Design • Waterproof & Weather-Resistant • Marine Grade Camera Construction • Rugged & Durable Metal Housing • Tilt Adjustable Camera Lens Angle

• Resolution 580 x 540 Pixels • Battery Operated Remote Control: Requires (2) x ‘AA’ Batteries, Not Included • Maximum SD Card Support: Up to 32GB • Power Supply: 12-24V, DC • Monitor Dimension (L x W x H): 7.08'' x 4.76'' x 1.02'' -inches • Sold as: 1