16
Reduce the cost of cultivation Extend the flowering season Anti-Season cultivation Easy to collocate color spectrum IR reflow process compatible Environmental friendly; RoHS compliance Panel Light Plant Lghting Tube Lighting Bulb Lighting Features : Typical Applications : Datasheet PLCC 5630B Single Color PLCC Series www.edison-opto.com Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 1

PLCC Series PLCC 5630B Single Color Datasheet - EDISON Opto_PLCC … ·  · 2014-12-04PLCC 5630B Single Color Series is available in 450nm~745nm which can be used in ... Copyright

  • Upload
    vanhanh

  • View
    216

  • Download
    2

Embed Size (px)

Citation preview

■ Reduce the cost of cultivation

■ Extend the flowering season

■ Anti-Season cultivation

■ Easy to collocate color spectrum

■ IR reflow process compatible

■ Environmental friendly; RoHS compliance

■ Panel Light

■ Plant Lghting

■ Tube Lighting

■ Bulb Lighting

Features :

Typical Applications :

Datasheet PLCC 5630B Single Color

PLCC Series

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 1

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 2

Table of Contents

General Information .........................................................................................................................................................3

Absolute Maximum Ratings ..........................................................................................................................................4

Characteristics ....................................................................................................................................................................4

Luminous Flux Characteristic ........................................................................................................................................5

Wavelength Bin Structure ..............................................................................................................................................5

Voltage Bin Structure .......................................................................................................................................................6

Characteristic curve ..........................................................................................................................................................8

Reflow Profile ......................................................................................................................................................................13

Reliability ..............................................................................................................................................................................14

Product Packaging Information ...................................................................................................................................15

Revision History .................................................................................................................................................................16

About Edison Opto ...........................................................................................................................................................16

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 3

PLCC 5630B Single Color Series can provide the specific wavelengths which are suitable for plant growth. LED applied in plant growth has the advantages of energy efficiency, long life and less heat generation. PLCC 5630B Single Color Series is available in 450nm~745nm which can be used in plant cultivation, greenhouse supplemental lighting and plant factory.

2 T 0 5 X 5 x X x x 0 0 0 x x xX1 X2 X3-X4 X5-X6 X7-X8 X9-X10 X11-X13 X14-X16

X1 X2 X3-X4 X5-X6 X7-X8

Type Component Series Wattage Color

2 Emitter T PLCC 05 5630 X5 0.5W BX Blue

EX Deep Red

FX Cherry Red

X9-X10 X11-X13 X14-X16

Internal code PCB Board Serial Number

- - 000 - - -

General Information

Introduction

Ordering Code Format

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 4

Absolute maximum ratings (Ta=25oC)

Note: 2θ1/2 is the off-axis angle where the luminous intensity is half of the axial luminous intensity.

Characteristics

Parameter Symbol Value Units

Viewing Angle (Typ.) 2Θ1/2 120 Degree

Forward voltage (Typ.) (Blue) (Deep Red/Cherry Red) VF

3.22.2 V

Thermal resistance - 10 oC/W

Wavelength (Blue) (Deep Red)

(Cherry Red) -

450-460650-670720-745

nm

JEDEC Moisture Sensitivity -

Level 2aFloor Life

Conditions: ≤30˚C / 60% RHSoak Requirements(Standard)

Time (hours): 120+1/-0Conditions: 60˚C / 60% RH

-

Absolute Maximum Ratings

Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum at all time.2. LEDs are not designed to be driven in reverse bias.3. tp: Pulse width time

Parameter Symbol Value Units

DC Forward Current (Blue) (Deep Red/Cherry Red) IF

200150 mA

Pulse Forward Current (tp<=100μs, Duty cycle=0.25) (Blue) (Deep Red/Cherry Red) Ipulse

400200 mA

Reverse Current IR 10 uA

Reverse Voltage VR 5 V

LED Junction Temperature TJ 115 °C

Operating Temperature - -40 ~ +85 °C

Storage Temperature - -40 ~ +115 °C

ESD Sensitivity (HBM) - 2,000 V

Soldering Temperature TsReflow Soldering : 255~260oC/10~30sec

Manual Soldering : 350oC/3sec

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 5

Luminous Flux Characteristic

Luminous Flux Characteristics, IF=150mA, VF = 5V and TJ=25˚C

Note: The luminous flux performance is guaranteed within published operating conditions. Edison Opto maintains a tolerance of ±10% on flux measurements.

Color Group Min. RadiometricPower(mW) @150mA

Max. RadiometricPower(mW) @150mA Order Code

Blue

B0 100.0 130.0

2T05X5BX00000002

B1 130.0 169.0

B2 169.0 219.7

B3 219.7 285.6

B4 285.6 371.2

Deep Red

R1 65.0 84.5

2T05X5EX00000001R2 84.5 109.8

R3 109.8 142.8

R4 142.8 185.6

Cherry Red

R0 50.0 65.0

2T05X5FX00000001R1 65.0 84.5

R2 84.5 109.8

R3 109.8 142.8

Wavelength Bin Structure

Note: Dominant wavelength Measurement Allowance is ± 1nm.

Color Group Min. Wd (nm) Max. Wd (nm)

BlueBU0 450 455

BV0 455 460

Deep Red EX0 650 670

Cherry Red FX1 720 745

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 6

Voltage Bin Structure

Color Group Min. Voltage (V) Max. Voltage (V)

Blue

VB1 2.9 3.0

VC1 3.0 3.1

VA2 3.1 3.2

VB2 3.2 3.3

VC2 3.3 3.4

Deep Red

UC3 1.8 1.9

UA4 1.9 2.0

UB4 2.0 2.1

UC4 2.1 2.2

UA5 2.2 2.3

UB5 2.3 2.4

UC5 2.4 2.5

VA0 2.5 2.6

VB0 2.6 2.7

VC0 2.7 2.8

Cherry Red

UC3 1.8 1.9

UA4 1.9 2.0

UB4 2.0 2.1

UC4 2.1 2.2

UA5 2.2 2.3

UB5 2.3 2.4

UC5 2.4 2.5

VA0 2.5 2.6

Note: Forward voltage measurement allowance is ± 0.06V.

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 7

Notes: 1. All dimensions are measured in mm.2. Tolerance : ± 0.20 mm

Cathode

Solder Pad

Circuit

1

2

(-) (+)

5.700±0.10

3.00

4.70±0.05

2

3.00

±0.0

5

1

0.8±

0.05

(+) (-)

21 2.050

3.63 1.18

1.35

1.35

0.652.62

1.8

1.64.03

2.45

1.003.03

0.89

Mechanical Dimensions

0.5

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 8

Characteristic curve

Color Spectrum

Color Spectrum at a typical CCT for PLCC 5630B 0.5W Single color

Nor

mal

ized

lum

inou

s In

tens

ity(%

)

Wavelength(nm)

1.2

1.0

0.8

0.6

0.4

0.2

0.0400 450 500 550 600 650 700 750 800

Beam pattern diagram for PLCC series

Beam Pattern

Nor

mal

ized

Rel

ativ

e In

tens

ity

Radiation Angle

1.0

0.5

0-90° -60° -30° 0°

0° 10°20°

30°40°

50°

60°

70°

80°

90°1.00.5

Deep Red

Blue

Cherry Red

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 9

Forward Current vs. Forward Voltage

Forward Current vs. Forward Voltage for PLCC 5630B 0.5W single clolor

Forward Voltage (V)

Forw

ard

Curr

ent (

mA)

1.2 1.6 2 2.4 2.8 3.2 3.6

240

200

160

120

80

40

0

Blue

Relative Luminous Intensity vs. Forward Current

Relative Luminous flux vs. Forward current for PLCC 5630B 0.5W Single color

Forward Current (mA) 0 50 100 150 200 250

1.50

1.25

1.00

0.75

0.50

0.25

0

Rela

tive

Lum

niou

s In

tens

ity

Deep Red

Cherry Red

Blue

Deep Red

Cherry Red

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 10

Relative Luminous Flux vs. Junction Temperature

Relative Luminous flux vs. junction temperature for PLCC 5630B 0.5W Single color

Rela

tive

Lum

niou

s In

tens

ity

Junction Temperature (oC)

0 20 40 60 80 100 120 140

1.2

1.0

0.8

0.6

0.4

0.2

0

Forward Voltage vs. Junction Temperature

Forward voltage vs. junction temperature for PLCC 5630B 0.5W Single color

Junction Temperature (oC)

Forw

ard

Volta

ge (V

F)

3.5

3.0

2.5

2.0

1.5

1.0

0 0 20 40 60 80 100 120 140

Blue

Blue

Deep Red

Cherry Red

Deep Red

Cherry Red

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 11

Wavelength vs. Forward Current

Wavelength vs. Forward Current for PLCC 5630B 0.5W Single color

0 50 100 150 200 250

780

720

660

600

540

480

420

Wavelength vs. junction temperature for PLCC 5630B 0.5W Single colorJunction Temperature (oC)

Wav

elen

gth

(nm

)

0 20 40 60 80 100 120 140

780

720

660

600

540

480

420

Wavelength vs. Junction Temperature

Blue

Blue

Forward Current (mA)

Wav

elen

gth

(nm

)

Deep Red

Cherry Red

Deep Red

Cherry Red

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 12

Maximum Current vs. Ambient Temperature for Deep Red & Cherry Red

Ambient Temperature (oC)

Max

imum

Cur

rent

(mA

)

240

200

160

120

80

40

0 0 20 40 60 80 100 120 140

Maximum Current vs. Ambient Temperature for Blue

Ambient Temperature (oC)

Max

imum

Cur

rent

(mA

)

240

200

160

120

80

40

0 0 20 40 60 80 100 120 140

Maximum Current vs. Ambient Temperature

Rth(J-A)=100oC/W

Rth(J-A)=120oC/W

Rth(J-A)=140oC/W

Rth(J-A)=85oC/W

Rth(J-A)=75oC/W

Rth(J-A)=65oC/W

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 13

Reflow Profile

The following reflow profile is from IPC/JEDEC J-STD-020D which provided here for reference.

Notes:1. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum.2. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.

Profile Feature Pb-Free Assembly

Preheat & SoakTemperature min (Tsmin)Temperature max (Tsmax)Time (Tsmin to Tsmax) (ts)

150 °C200 °C

60-120 seconds

Average ramp-up rate(Tsmax to Tp) 3 °C/second max.

Liquidous temperature (TL)Time at liquidous (tL)

217 °C60-150 seconds

Peak package body temperature (Tp)* 255 °C ~260 °C *

Classification temperature (Tc) 260 °C

Time (tp)** within 5 °C of the specified classification temperature (Tc) 30** seconds

Average ramp-down rate (Tp to Tsmax) 6°C/second max.

Time 25oC to peak temperature 8 minutes max.

Classification Reflow Profiles

Reflow Profiles

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 14

Reliability

NO . Test Item Test Condition Remark

1 Temperature Cycle -40°C~100°C30, 30, mins 100 Cycle

2 Thermal Shock -40°C~100°C 15, 15 mins ≦10 sec 100 Cycle

3 Resistance to Soldering Heat TSOL=260°C, 30 sec 3 times

4 Moisture Resistance 25°C~65°C 90% RH 24 hrs / 1 cycle 10 Cycle

5 High-Temperature Storage TA=100°C 1,000 hrs

6 Humidity Heat Storage TA=85°CRH=85% 1,000 hrs

7 Low-Temperature Storage TA=-40°C 1,000 hrs

8 Operation Life test 25°C 1,000 hrs

9 High TemperatureOperation Life test 85°C 1,000 hrs

10 High Humidity Heat Life Test 85oC, 85%RH 1,000 hrs

11 ON/OFF Test 30 sec ON, 30 sec OFF 1.5W times

Item Criteria for Judgment

Min. Max.

Lumen Maintenance 85% -

Δu'v' - 0.006

Forward Voltage - Initial Data x 1.1

Reverse Current - 10 μA

Resistance to Soldering Heat No dead lamps or visual damage

Failure Criteria

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 15

Product Packaging Information

Item Quantity Total Dimensions(mm)

Reel 3,000pcs 3,000pcs R=178

Carton 36 reels 108,000pcs 520*255*285

Starting with 50pcs empty, and 50pcs empty at the last

Reel Label

Label

Moisture absorbent material Moisture proof bag

Seal

Taping Reel

Section

Section

Note: All dimensions are measured in mm.

4.0±0.101.5 +0.3/-0

2.0±0.050.25±0.05

4.0±0.1

01.7±0.1

3.3±0.1

1.75

±0.

15.

5±0.

05

0.2

(5 o)

0R0R

Section A-A'

A A'

B'

B

12.0

±0.

2

(4.7

5) 6.1±

0.1

1.2±0.1Section B-B'

(5o )

0R

0R9±0.5

0178±1

013±

0.5

060±

0.5

www.edison-opto.com

Copyright © 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 16

About Edison Opto

Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at www.edison-opto.com

Copyright©2014 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice.

www.edison-opto.com

For general assistance please contact:[email protected]

For technical assistance please contact:[email protected]

Revision History

Versions Description Release Date

1 Establish a Datasheet 2014/11/20