PLC vs TRIAC / SCR Dimming System - Lite-Puter

Since 1978 41

PLC (Power Line Communication) LED Dimming System PLC 電力線載波 LED 燈光控制系統

Wiring comparison between PLC and TRIAC/SCR LED

Dimming System

1. PLC Dimming System : No signal cable needed , a

power line control 96 individual dimming

channels,save wiring and piping costs up to 90%.

2. TRIAC/SCR Dimming System : every channel reguires

a power line and a TRIAC/SCR dimmer。

PLC bluetooth Panel direct installed to AC Line。

Through WIFI or bluetooth connection , smart-phone ortablet

can set dimmimg level of every channel and save scene momery.

Each Bluetooth Panel can control 15 zones(rooms) 60Channels 。

Every room can install 1 or more bluetooth panels 。

May set one of panels for master controller.

TRIAC/SCR Dimmers

one Dimmer for one channel

PLC

TRANS

PLC

TRANS

PLC

TRANS

PLC

TRANS

PLC

TRANS

TRIAC

TRANS

PLC Dimming System, all lights are parallel 。

TRIAC

TRANS

TRIAC

TRANSTRIAC

TRANS

TRIAC

TRANS

TRIAC/SCR Dimming System Wiring one by one 。

13 4

2

5

13 4

2

5

PLC Dimming 5channels TRIAC / SCR Dimming 5channels

AC 120/240VAC + PLC 100 - 240V

PLC vs TRIAC / SCR Dimming System

DMX

Console

Since 1978 42


Programmable Control Panels PLCP-Series

+

-

+

-

AUTO HI MED LOW OFF

PLC Control Panels

Each button on PLCP-Series control panel can be set for operating function

through computers:

2-color LED indication.

Light-emitting button description can be placed inside the acrylic panel

switch.

Select any channel as group, different buttons control different groups, each

group covers same or different channels.

Any single channel switch function.

Group channel switch function.

Regional group overall switch function.

Cross-regional control function.

Dimming brightness control function.

Button mutual exclusion function settable. For example, selecting four

buttons but only one button and one scene works at one time.

Spec:

Input voltage: 24VDC 10mA

Input signal: PLCT 2-line signal

Up to communication distance 700-1000m

Size: 70 *120* 30mm (US-Type)

86 * 86 * 30mm (Euro-Type)

Since 1978 43


1.PLC LED dimmers, no signal cable needed, easy wiring.

2.16384 steps dimming resolutions with precisely requirement on every step, stable control and non-flickering.

3.Bi-directional communication, reports status including voltage, current, temperature and remotely addressing.

4.With central monitoring function.

PLC Central Monitoring & Control

Since 1978 44


DP-81B

RS-485 / DMX SPLITTER

Photo-isolated 1in 8out

DP-82B

DMX Mixer

8 in 1 out

DP-83B

RS-485 / EDX SPLITTER

1in/out 8 in/out

Bi-direction RS-485

Photo-isolated

DP-512A

DMX Display

512 CH

PLC PeripheralDMX SPLITTER / MIXER

Since 1978 45


PLC central monitoring peripheral

DP-T06 / DP-E6B

DP-E6B Ethernet Interface

DP-T06 Scenes Memory and system monitoring

DP-T06 LCD touch panel can control every channel dimming level for

scene saving and auto timing operation; can also be peripheral,

through USB or Ethernet network, for all data saving, auto operation

while off-line.

1. DP-T06 is a regional control host, accepting central control

signal, program setting and record. DP-T06 owns memory

device and clock, automatically scheduled when offline.

2. DP-T06 outputs DMX/EDX/PLNET/PLC signals, connecting

standard DMX and 2-line signal control system.

3. DP-T06 handles more than 4096 DMX signals (amplification

available)

4. DP-T06 stores return data from each channel and report to

central monitoring.

5. DP-T06's internal clock can be synchronized with central

monitoring time with an astronomical clock function.

6. Timing setting in the smallest unit of seconds.

Specification :

AC in : 90 -- 240V AC Fuse 2A

Control in / out: DMX / EDX / RS-485 / USB / PLC / PLNET, RJ-45

(Ethernet)

Dimensions ：482mm * 132mm * 131mm (W*H*D) 2.6Kg

1. DP-E6B is a regional control host, accepting central control

signal, program setting and record. DP-E6B owns memory

device and clock, automatically scheduled when offline.

2. DP-E6B outputs DMX/EDX/PLNET/PLC signals, connecting

standard DMX and 2-line signal control system.

3. DP-E6B handles more than 4096 DMX signals (amplification

available)

4. DP-E6B stores return data from each channel and report to

central monitoring.

5. DP-E6B's internal clock can be synchronized with central

monitoring time with an astronomical clock function.

6. Timing setting in the smallest unit of seconds.

7. SD memory card device.

8. DP-E6B owns high-speed recording function for all signal

changes up to 41 times/sec, for efficient maintenance.

Specification :

AC in : 90 -- 240V AC Fuse 2A

Control in / out: DMX / EDX / RS-485 / USB / PLC / PLNET, RJ-45

(Ethernet)

Dimensions ：482mm * 88mm * 100mm (W*H*D) 2.0Kg

Since 1978 46


PLC Dimming System PeripheralPLC Transceivers

PL-DP2410 RS-485 / DMX to PLC Converter Model AC IN AC+PLC OUT Signal in RemarkChannel

PL-DP2401 100-240VAC 10A RS-485 6 - 96CH.

PL-RF10 to PLC Converter ( RF) Model AC IN AC+PLC OUT Signal in/ out channels

PL-RF10 100-240VAC 10A PLC 6 - 96CH.

1. PLC Filter 2. RF Wireless Transceiver for PLC Signals communication of different AC Lines.3. CPU and PLC amplifier

。

。

1. PLC Filter 2. DMX / RS-485 to PLC Converter3. CPU and PLC Amplifier4. Start Channel and Zone number selectable 。

。。

。

Dimensions : 190 x 65 x 85 mm ( W x H x D )

Dimensions: 190x 65 x 85 mm ( W x H x D )

PL-RPT01 PLC Repeater

PL-RPT01 100-240VAC 10A PLC / PLC

1. PLC Filter 。2. PLC signal repeating amplifier for more distance。

Remark

Model AC IN AC+PLC OUT Signal in/ out channels Remark

Since 1978 47


ECP-T06 LCD Touch Panel

ECP-T06 LCD colored touch panel can be single control or group control through

different screens, scene saving and multi-functional control panel through USB and

Ethernet network.

Through PLC scene setting and programming timing control, available for:

1. Controlling channel address for each module

2. Setting the parameters of each module, such as current limit, temperature limit

value, etc.

3. Clock calibration and timing editing

4. Picture editing on LCD

5. Plane or stereoscopic setting for simulated scene control。

Soecification :

Power input ： 24V DC

Control in / out ：DMX / EDX / RS-485 / USB / PLC / PLNET, RJ-45 (Ethernet)

Dimensions : 215mm * 140mm * 39mm (W*H*D) 520g

PLC Touch Controller

ECP-T06

Since 1978 48


PL-DX403TL

4Channels Trailing 4Channels Dimmer

Dimensions: 234(W) x 90 (H) x 62(D) mm 670 g

Built-in CPU and memory

Dimming and non-dimming mode

Trailing edge dimming output

4-channel output

Overheat, overcurrent, short circuit protection

System status report

Maximum and minimum output values settable

Power failure memory

Supporting 9 dimming curves

DX-1210TE

12Channels Trailing Edge Dimming Module

12Channels 10A * 12

DMX IN

12 Modules plug in type

High Power IGBT Trailing edge control

Warm up setting

Thermo-controlled fans

Dimensions: 482 * 176 * 297 mm ( W * H * D ) 21Kg

Trailing Edge Dimming Module

IGBT/MOSFET DimmerTrailing-Edge

TRIAC/SCR DimmerLeading-Edge

AC Sine Wave

Trigger

Trigger

IGBT/MOSFET DimmerTrailing-Edge

Since 1978 49


Ethernet To PLC InterfacePL-DPE100

PL-DPE100 Ethernet To PLC

AC IN : 100 - 240VACLAN To PLC

144 (W) x 90 (H) x 62 (D) mm 460g

Since 1978 50


PLC Control Panels and Peripheral

PLC Control Panels PL-LD101II PLC to 0 -10V ConverterAC + PLC In : 100-240VAC

AC Output :Magnetic Latching Relay 5A Max.

DC Dimming output : 0--10V

Dimensions : 170 * 41 * 28 mm ( W * H * D ) 210g

PL-DP106E MULTI-PROTOCOL Converter

USB

EDX

LAN

PLC

RS-485

RS-232

Dimensions : 143 * 75 * 37 mm ( W * H * D ) 500g

Documents

PLC vs TRIAC / SCR Dimming System - Lite-Puter