PlayStation 3 Super Slim Laser UnitReplacement

How to disassemble and change the Laser Unit.

Written By: ZFix

PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -

This document was generated on 2019-09-20 05:45:04 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 8

INTRODUCTION

How to disassemble and change the Laser Unit.

[video: https://www.youtube.com/watch?v=qXvM_xy4kKU]

TOOLS:Phillips #00 Screwdriver (1)Metal Spudger (1)

PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -

This document was generated on 2019-09-20 05:45:04 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 8

Step 1 — Laser Unit / Deck replacement

Turn off the console anddisconnect all cables.

Step 2

You must remove the warranty sticker and 4 screws.

PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -

This document was generated on 2019-09-20 05:45:04 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 8

Step 3

After removing HDD bay cover, you will see another 3 screw.

Step 4

Push there to release and remove upper back bezel.

PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -

This document was generated on 2019-09-20 05:45:04 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 8

Step 5

The upper front bezel is harder to remove.

Step 6

Remove 7 screws to release top cover.

PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -

This document was generated on 2019-09-20 05:45:04 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 8

Step 7

Disconnect two flex-cables and move the Laser Unit. Remove the two screws and the smallcable and then take out the Power Supply Unit.

Step 8

To release the laser unit disconnect this flex-cable.

PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -

This document was generated on 2019-09-20 05:45:04 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 8

Step 9

One flex-cable, for rubbers and the metal bezel.

Step 10

Disconnect this flex-cable and attach it to the new spare part. Let's start assembling.

PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -

This document was generated on 2019-09-20 05:45:04 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 8

To reassemble your device, follow these instructions in reverse order.

Step 11

Assembling, assembling...

Step 12

Let's test the device before fully assembling it.

PlayStation 3 Super Slim Laser Unit Replacement Draft: 2019-07-18Guide ID: 20911 -

This document was generated on 2019-09-20 05:45:04 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 8