Embed Size (px)
Citation preview
Page 1 of 26
Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:[email protected] www.certificationservices.com.au
www.jas-anz.org/register
Certificate Number: 239
Issue Date:31st January 2020
Issue: 03 Revision: 07
Certificate of Conformity
Australian Certification Services Pty Ltd grants to the WaterMark Approved User:
Plastec Australia Pty Ltd Trading as Plastec Australia Pty Ltd
the right to use the WaterMark as shown above in conjunction with the Certificate No. on product/s as identified in the
WaterMark Schedule and as listed on the WaterMark database www.abcb.gov.au/Product-Certification/WaterMark-
Certification-Scheme which have been shown to comply with the appropriate Applicable Specification referred to below
and as amended from time to time. The WaterMark User is granted a licence to use the WaterMark subject to the rules
governing the use of the WaterMark.
Product Type: Waste Fittings
Product Use: Sanitary Drainage
Brand: PLASTEC
Certification Specification/s: AS 2887:1993 Plastics waste fittings
WMTS 040:2018 Waste pipe connection outlets and gratings separate or
integral
Issue Date 31st January 2020 Paul Greig
Initial Issue Date: 9th June 2009 General Manager
Expiry Date: 18th October 2023
Certificate No.: 239
This Certificate is issued by a JAS-ANZ accredited certification body. The ABCB and JAS-ANZ do not in any way warrant, guarantee or represent that the product the subject of this Certificate conforms to the WaterMark Certification Scheme Rules, nor accepts any liability arising out of the use of the product. The ABCB disclaims to the extent permitted by law, all liability (including
negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this Certificate. The WaterMark Certification Scheme is a conformity assessment scheme based on ISO/IEC 17067. This Certificate may
only be reproduced in its entirety
Page 15 of 26
Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:[email protected] www.certificationservices.com.au
www.jas-anz.org/register
Certificate Number: 239
Issue Date:31st January 2020
Issue: 03 Revision: 07
The WaterMark User Plastec Australia Pty Ltd
2-4 Enterprise St Caloundra Queensland 4551 AUSTRALIA
Website: www.plastec.com.au
Certificate Number 239
Evaluation Specification/s: WMTS 040:2018 Waste pipe connection outlets and gratings separate or
integral
Product Listing
Model Identification Brand Name Product Description
CU000 Plastec DN 40 Pop-Up Waste
11710 Plastec Bath Flexible Hose Kit with Included Waste
11713 Plastec Bath Flexible Hose Kit with Included Waste Chrome Plated
11730 Plastec Shower Flexible Hose Kit
11740 Plastec DN 40 Bath Connection Kit
11760 Plastec DN 40 Plug and Waste
11762 Plastec DN 40 Plug and Waste
11773 Plastec DN 40 Plug and Waste Long
11775 Plastec DN 40 Plug and Waste x 90mm Tail Stainless Steel Trim
11783 Plastec DN 32 Plug and Waste x 90mm Tail and Overflow
11785 Plastec DN 32 Plug and Waste x 90mm Tail and Overflow Stainless Steel
Trim
11786 Plastec DN 50 Plug and Waste
11788 Plastec DN 50 Plug and Waste Stainless Steel
11794 Plastec DN 50 Stainless Steel Sink Waste
11796 Plastec DN 40 Plug and Waste Elbow Kit
11798 Plastec DN 40 Plug and Waste Elbow Kit
12001 Plastec DN 80 Vinyl Floor Flange Flexible
12002 Plastec DN 100 Vinyl Floor Flange Flexible
Page 17 of 26
Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:[email protected] www.certificationservices.com.au
www.jas-anz.org/register
Certificate Number: 239
Issue Date:31st January 2020
Issue: 03 Revision: 07
Model Identification Brand Name Product Description
12450 Plastec DN 80 Floral Stubby Shower Waste and Grate
12452 Plastec DN 100 Floral Stubby Shower Waste and Grate
12460 Plastec DN 80 Brass Grate Slotted Square
12462 Plastec DN 100 Brass Grate Square
12490 Plastec DN 100 Tile Grate
12491 Plastec DN100 Stainless Steel Bodied Tile Waste
12521 Plastec DN 80 Puddle Flange
12522 Plastec DN 100 Puddle Flange
12523 Plastec DN 80 x DN 50 Puddle Flange
12540 Plastec DN 100 Waste and Grate Flexible
12544 Plastec DN 100 Waste and Grate Elastomeric Seal End Connection
Diamond Shape Flange
12548 Plastec DN 100 Waste and Grate Elastomeric Seal End Connection
Square Shape Flange
12564 Plastec DN 80 x 50 Waste and Grate Stainless
12570 Plastec DN 80 Waste and Grate Stainless
12670 Plastec DN 50 Floor Waste
12674 Plastec DN 80 Floor Waste
12677 Plastec DN 100 Floor Waste
12683 Plastec DN 50 Waste and Grate Stainless
12700 Plastec DN 80 Adjustable Floor Waste
12702 Plastec DN 100 Adjustable Floor Waste
12712 Plastec DN 80 Flexible Floor Waste and Grate
12714 Plastec DN 100 Flexible Floor Waste and Grate
Page 1 of 18
Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:[email protected] www.certificationservices.com.au
www.jas-anz.org/register
Certificate Number: 23900
Issue Date: 17th January 2020
Issue: 01 Revision: 11
Certificate of Conformity
Australian Certification Services Pty Ltd grants to the WaterMark Approved User:
Plastec Australia Pty Ltd Trading as Plastec Australia Pty Ltd
the right to use the WaterMark as shown above in conjunction with the Certificate No. on product/s as identified in the
WaterMark Schedule and as listed on the WaterMark database www.abcb.gov.au/Product-Certification/WaterMark-
Certification-Scheme which have been shown to comply with the appropriate Applicable Specification referred to below
and as amended from time to time. The WaterMark User is granted a licence to use the WaterMark subject to the rules
governing the use of the WaterMark.
Product Type: Waste Fittings
Product Use: Sanitary Drainage
Brand: PLASTEC
Certification Specification/s: AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent
applications
Issue Date: 17th January 2020 Paul Greig
Initial Issue Date: 9th June 2009 (Under 239) General Manager
Expiry Date: 18th October 2023
Certificate No.: 23900
This Certificate is issued by a JAS-ANZ accredited certification body. The ABCB and JAS-ANZ do not in any way warrant, guarantee or represent that the product the subject of this Certificate conforms to the WaterMark Certification Scheme Rules, nor accepts any liability arising out of the use of the product. The ABCB disclaims to the extent permitted by law, all liability (including
negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this Certificate. The WaterMark Certification Scheme is a conformity assessment scheme based on ISO/IEC 17067. This Certificate may
only be reproduced in its entirety
Page 2 of 18
Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:[email protected] www.certificationservices.com.au
www.jas-anz.org/register
Certificate Number: 23900
Issue Date: 17th January 2020
Issue: 01 Revision: 11
WaterMark Certification Schedule
The WaterMark User Plastec Australia Pty Ltd
2-4 Enterprise St Caloundra Queensland 4551 AUSTRALIA
Website: www.plastec.com.au
Certificate Number 23900
Evaluation Specification/s: AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent
applications
Product Listing
Model Identification Brand Name Product Description
11646 Plastec DN 100 Overflow Relief Waste and Grate DT Surround
11647 Plastec DN 100 Overflow Relief Waste and Grate DT Surround with
Stainless Steel Shroud
11650 Plastec DN 100 Overflow Relief Waste and Grate DT Surround
11651 Plastec DN 100 Overflow Relief Waste and Grate DT Surround with
Stainless Steel Shroud
11656 Plastec DN 100 Overflow Relief Waste and Grate DT Surround with Lid
11657 Plastec DN 100 Overflow Relief Waste and Grate DT Surround with Lid and
Stainless Steel Surround
11662 Plastec DN140x100 Finishing Collar with Flat Grate Square Holes
11671 Plastec DN140 Flat Grate Square Holes
11696 Plastec DN100 Bolted Cap Screw Brass Lid Chrome Plated Solvent Cement
Spigot
11697 Plastec DN100 Bolted Cap Screw Brass Lid Chrome Plated Solvent Cement
Spigot
11706 Plastec DN 100 Bolted trap Screw
11707 Plastec DN 100 Bolted trap Screw with Stainless Steel Surround
12050 Plastec DN40 PVC-U Puddle Flange
Page 3 of 18
Australian Certification Services Pty Ltd ABN 37 121 022 366 PO Box 627 Jannali, NSW 2226 AUSTRALIA Phone:+61 2 8521 0726 Email:[email protected] www.certificationservices.com.au
www.jas-anz.org/register
Certificate Number: 23900
Issue Date: 17th January 2020
Issue: 01 Revision: 11
Model Identification Brand Name Product Description
12051 Plastec DN50 PVC-U Puddle Flange
12537 Plastec DN 100 Adaptor
12660 Plastec DN 80 Flange Adaptor
12950 Plastec DN 40 MF Pipe Elbow
12951 Plastec DN 50 MF Pipe Elbow
12960 Plastec DN 40 MF Elbow Tapered Spigot
12961 Plastec DN 50 MF Elbow Tapered Spigot
14292 Plastec DN 50 Puddle Flange Round O Ring Seal
14293 Plastec DN 100 Puddle Flange Square O Ring Seal
14294 Plastec DN 100 Puddle Flange Round Maxi Swivel
14295 Plastec DN 80 Puddle Flange Round
14301 Plastec DN 80 Puddle Flange Threaded Plain Spigot
14304 Plastec DN 100 Puddle Flange Threaded Plain Spigot
14305 Plastec DN 50 Puddle Flange Threaded Plain Spigot
14306 Plastec DN 100 Puddle Flange Round Threaded O Ring Seal
14307 Plastec DN 50 Puddle Flange Round Threaded O Ring Seal
14308 Plastec DN 80 Puddle Flange Round Threaded O Ring Seal
14350 Plastec DN 100 Flange Threaded Adaptor
14353 Plastec DN 50 Flange Threaded Adaptor
14354 Plastec DN 80 Flange Threaded Adaptor
14464 Plastec DN 100 Puddle Flange Round O Ring Seal
14466 Plastec DN 50 Puddle Flange Round Maxi Swivel
14571 Plastec DN100 Flange Adaptor
