Page

1

PLANWIN / RCDC/QCPLAN

Planwin / RCDC is a total end to end solution for RCC Building design and drawing. It offers following

Simplified Structural Planning, Pre-processor to create input Data for STAAD as well as ETABS, Design and detailing of RCC Members, Drawing (Schedule as well as detailed cross-sections and elevations), Design Calculation Reports, Quantity estimation.

Most of the commercial software used for analysis have complex modeling environments. This is especially true when it comes to complex non-standard structures. Take as an example the plan below. Generating analysis models in Staad Pro or E-tabs for such complex geometry can be very tedious.

Keeping this in mind software PLANWIN / FRAMEWIN developed by COMPUTER HELP simplifies data input to great extent.

Page

2

It directly reads plan data from CAD drawing. CAD drawing consists of closed poly lines representing slab panels. After importing in PLANWIN module it appears as follow.

Intensity of load due to Dead Load & Live load is specified along with the direction in which load is to be transferred. (One way or two ways or on selected edges)

Columns can be conveniently located at desired locations. Where by cursor moves to each possible location and columns are marked either on joint or relative to the joints. Unlike other software user has complete control over naming the columns.

The AUTOBEAM feature identifies all the beams automatically along with self weight and wall loads.

Page

3

Next floor analysis is carried out by which loads from slabs are transferred to beams and from primary beams to columns. User can click on any column and find out how the load is transferred from each beam as shown below

Page

4

Also user can click on any beam and find out how the load is transferred to beams.

Depending on number of different levels, different plans are made and load for each plan is worked out. Next FRAMEWIN module combines all the floor depending on number of levels.

Page

5

In all the currently available software size of columns are to be assumed. Here since load on each column from each floor is available, initial size of are worked out depending of grade of concrete and percentage of steel.

Also user can align the column along the beam line. Also user has option to specified constant face of column. (Many consultants prefers to reduce the column sizes along upper floors)

Page

6

This also works out offset automatically. User has option to create shear walls by clicking between two columns.

Wind loads are worked depending on location of structure. Similarly seismic factors are worked out based on various parameters provided.

Now user has option either to create ETABS files (E2k) or STAAD file.

Page

7

STAAD File ETABS File

User can use either ETABS or STAAD engine for analysis.

Page

8

Data generated from PLANWIN / FRAMEWIN is directly transferred to RCDC which seamlessly takes the user through the Design-Detailing-Drawing-Documentation process.

RCC DesignCenter PLUS (RCDC) developed by S-cube Technologies, Mumbai is an unique software that automates and seamlessly integrates the 4Ds of structural engineering process: Design-Detailing-Drawing-Documentation.

The unique features of RCDC are:

1. Automatically integrates with analysis software such as STAAD PRO and E-tabs to capture analysis outputs.

2. Auto-Design & Detailing of various structural elements such as a. Beams, b. Column, c. Shear Walls, d. Footing- Pad, Trapezoidal and stepped, e. Slabs

3. Unique interactive front end that gives the engineer total control of the Design & Detailing process. Offers unmatched flexibility in working with various member and material properties and reinforcement arrangements.

4. Auto-Generation of ready to ship detailed drawings in section and elevation formats. 5. Auto-Generation of design schedules. 6. Auto-Generation of detailed design calculation reports, to be submitted to high rise committee, peer

reviews etc. 7. Auto-Generation of diameter wise, element wise Bill Of Materials.

In an era of intense competition RCDC PLUS is that tool that will give you that cutting edge which will differentiate you from everyone else. The software will enable you to deliver high quality designs and drawings at never before speeds. The software has the capacity of saving up to 60% time and 45% cost in the Design-Detailing-Drawing-Documentation process.

Page

9

Page

10

Page

11

Page

12

Page

13

Page

14

Page

15

GGEENNEERRAALL IINNTTRROODDUUCCTTIIOONN

DDeevveellooppeedd BByy:: AA..CC.. RRAAMMCCHHAANNDDRRAANN && AASSSSOOCCIIAATTEESS,, BBAANNGGAALLOORREE 008800--2233551144551111 // 008800--6655667722006600// 99884455445511445566,, aaccrr@@bbggll..vvssnnll..nneett..iinn

MMaarrkkeetteedd aanndd SSeerrvviicceedd bbyy::

Page

16

DEVELOPMENT has taken More than 25 years. During 1985-2000 DOS version QSII & QSLINK. DOS version won the Best Civil Engg. Software award from Association of Consulting Civil Engineers (India) in 1994. During 2001 - 2006 Windows version CAMP. Fromm 2007 Windows version QCPLAN.

DATA SYSTEM of the software can be any of the following:

A. For Central Govt. Organizations as per CPWD specs & rate analysis of 2007 B. For Private Organizations based CPWD specs & rate analysis but modified to the local

requirements. C. For MES organizations, selected specs. & schedule rates of 1996.

APPLICATIONS: PRE-TENDER APPLICATIONS.

1. Direct input or import of L,B,D or lump-sum quantities by selecting desired specs for any number of buildings.

2. Detailed quantity generation for about 90-95 civil items of buildings by graphical & numerical input. 3. View the abstract estimate of total project and its total resources requirements. 4. Change the rate of any resource and get the revised cost of the project 5. Provide indirect expenses of project for adding to rate analysis and total project cost. 6. Providing % wise overhead, profit, lift charges etc. for rate analysis and total project cost. 7. Printing abstract estimates in different formats. 8. Generate CPM based execution schedule with default data. 9. Modify the execution schedule to user’s requirement by changing the relevant data. 10. View resource & finance flow as per execution schedule and level the resource flow by changing schedule. 11. Generate CPM data in Excel format for importing it from M.S. Project / Primavera 12. Generate diameter wise reinforcement steel for RCC items with graphical and numerical details. 13. Prepare total tender documents consisting of tender conditions, technical specifications, schedule of

quantities. 14. Evaluation of tenderer’s rates with different type of reports like 15. Printing priced bill of quantities with selected tenderer’s rate and making contract document. 16. Generate data file required billing applications with the selected tenderer’s rates.

POST-TENDER APPLICATIONS.

17. Convert priced bill of quantities as contract items with unique number code for each items. 18. Assign contract items to main contract and sub-contractors and change the rates of sub-contractors. 19. Enter / import detailed / abstract site measurements as and when required. 20. Print the running bills and its summary for sub-contractors and main contract with part rate details etc. 21. Prepare Running Account Bill and provide reports as on bill date for cost and resource management.

SOME OF THE MAJOR GUI USED IN THE SOFTWARE:

Page

17

Data system for Specifications :

Rate analysis details of specification:

Graphical and numerical details for detailed quantity generation:

Page

18

Execution Schedule & resource flow proposed based on the detailed quantities and certain default data: .

Weekly resources and finance requirement table as per the execution schedule

Page

19

Execution schedule exported to MS Project:

Page

20

USER LIST

B.G.Sirke Satish C Dhupelia Mahimtura & Associates Ruikar & Associates Vastech Consultants Bhilare & Associate Satish Marathe Mone & Associates Yadwad Parag Chopra Mahadeo Khurd Shriram Joshi (Solarpur) Shrikhande & Associates Malpani & Associates (Nasik) Bhavsar & Associates (Nasik) Chetna Consultants (Banglore) Namdeo Shinde Olavo Carvalho Coutino & Associates (Indonesia) Ramesh Kamath (USA) Bharat Patel (Surat) Nanavati & Associates (Surat) Jayesh Dalal (Surat) Panchal & Assciates (Surat) Kalpesh Shah (Surat) Vijay & Associates (Surat) Viresh & Associates (Surat) Anand Dave (Ahmedabad) Manish Doshi (Rajkot) Darshan Mehta (Bhuj)

Shanghvi & Associates Shantilal Jain Sankhe & Associates Rajesh Patil (Dubai) Deepak Shah Jagdish Shah Sonesar & Associates Pranesh Vaidya (Solapur) Vijaykumar & Associates Anand Dave Dwijen Bhat Umesh Dhargarkar Munesh Choksey Darshan Mehta Vigyan Technology Countino (Indonesia) Jayesh Dalal Panchal & Associates Mahadeo Desai Ashish Shreevastav Ramesh Kamat (USA) Shintre & Assciates Dandekar Prakash Raut & Associates MES (Military Engineering

Services) Anil Kadam Bane & Associates (Kolhapur) Dabeerprasad Kishore Jain Limye & Associates Prasad & Associates

Page

21

• M/s. Renaisance Developers, Malleswaram, Bangalore.

List of User for QC Plan

• M/s. Bagadia Developers, Rajajinagar, Bangalore.

• M/s. Nitesh Estate, M.G. Road, Bangalore.

• M/s. Krushi Builders, Jayanagar, Bangalore.

• M/s. Fine Line Developers, Vasanthnagar, Bangalore.

• M/s. Brigade Group, Developers, Lavelle Road, Bangalore.

• M/s. WoodKraft Industries (Interior Contractors).

• M/s Divyashree Developers (For services with the software)

• M/s. Shobha Developers, Bangalore. • M/s. Caliber Builders, Electronic City,

Bangalore. • M/s. Reddy Structures, J.P. Nagar.

(Integrated to ERP Software) • M/s. Devedatta MES Contractors,

Panaji, Goa. • M/s. Chartered Housing, Bangalore.

(Intergrated to ERP Software) • M/s. BHEL R&D, Hyderabad. • M/s. BEML, Bangalore. • M/s. BWSSB (Bangalore Water Supply

& Sewerage Board), Bangalore. • M/s. Prakalp Services (PMC), Nagpur. •

Page

22

Pricing

PLANWIN / FRAMWIN Planwin With STAAD Link Rs 30,000.00 Planwin With STAAD + ETABS Link Rs 45,000.00

RCDC Module All RCDC Module have facility to read data from

STAAD ETABS

PLANWIN / FRAMEWIN 1) RCDC Footing Design Including drawing showing

Schedule Detailed Drawing

(Isolated Footing, Step Footing & Flat Footing) Detailed calculations Quantity take off for Excavation, Form Work , Concrete & Reinforcement (bar dia wise)

Rs 12000.00

2)RCDC Biaxial Column Design Including drawing

Schedule Detailed Drawing

Detailed calculations Quantity take off for Concrete & Reinforcement (bar dia wise)

Rs 15000.00

3)RCDC Beam Design Including drawing

Schedule Detailed Drawing (Cross Section)

Detailed calculations Quantity take off for Concrete & Reinforcement (bar dia wise)

Rs 20,000.00

Page

23

4)RCDC Shear Wall Design Including drawing

Schedule Detailed Drawing (Cross Section)

Detailed calculations Quantity take off for Concrete & Reinforcement (bar dia wise)

Rs 15000.00

5)RCDC Slab / Staircase Design Including drawing

Schedule Detailed Drawing (Cross Section)

Detailed calculations Quantity take off for Concrete & Reinforcement (bar dia wise)

Rs 10,000.00

6)RCDC Link with PLANWIN / FRAMEWIN

Rs 5000.00

All RCDC Modules (1 to 6) Rs 60,000.00 QSII

Quantity Estimation , Tender Document, Rate analysis (as per CPWD) , Time analysis, Resource Allocation , Material requirement

Rs 40,000.00

For any further details please contact Prakash B Bajaj at 098210-71194 email: prakashbbajaj@gmail.com Sajit Nair at 098216-87930 email: info@s-cube.in