Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
COMPLETE PROFILE EXTRUSION PLASTIC LUMBER MANUFACTURING AND PLASTICRECYCLING FACILITY INCLUDING (12) EXTRUSION LINES TO 6”, GRINDERS TO 150-HP,
MATERIAL HANDLING EQUIPMENT, FORK LIFTS, SHOP AND SUPPORT EQUIPMENT
COMPLETE PROFILE EXTRUSION PLASTIC LUMBER MANUFACTURING AND PLASTICRECYCLING FACILITY INCLUDING (12) EXTRUSION LINES TO 6”, GRINDERS TO 150-HP,
MATERIAL HANDLING EQUIPMENT, FORK LIFTS, SHOP AND SUPPORT EQUIPMENTSee Instructions on Page 2
To Become a Qualified Bidder on the Internet
150-HP and 125-HP Central Grinders 70 MM PFEX Model PH-250-H1010100 Extruder
(2) Vecoplan Shredders to 75-HP (to 2004)
Late Model Downstream Equipment
(13) Extrusion Lines from 6” to 2-1/2” and 400-HP by PTI, Davis, NRM and Others
Plant Closed
ECO-TECH PLASTICS, LLCECO-TECH PLASTICS, LLC1956 (for GPS use 6455) S. Pine Street – Burlington, Wisconsin 53105
60 Miles North of Chicago – 30 Miles Southwest of Milwaukee
SALE DATE: THURSDAY, MAY 28TH, STARTING AT 9:00 AMSALE DATE: THURSDAY, MAY 28TH, STARTING AT 9:00 AMINSPECTION: WEDNESDAY, MAY 27TH FROM 10:00 AM TO 4:00 PM
CINCINNATIINDUSTRIALAUCTIONEERS
auctioneers | appraisers | since 1961
Sale Under The Management Of
Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]
In Conjunction with, Technical Advisors
847-956-7300 www.arlingtonmachinery.com
1543867H CIA Eco-Tech Plastics-6 4/30/15 10:57 AM Page 3
THURSDAY, MAY 28THTHURSDAY, MAY 28TH
EXTRUSION LINES 6.0” PTI Model 6.0-400Extruder; S/N 1621, Air Cooled,400-HP, 24:1 SEE PHOTO• 14” x 10’ Conair Gatto
Vacuum Sizing Tank• 18” x 66” Conair Gatto
Cleated Belt Puller• Conair Gatto Automatic
Upacting Saw6” Davis Standard Thermatic60T Extruder; 150 HP
SEE PHOTO4.5” PTI Model 4.5-200Extruder; S/N 1351, Air Cooled,200-HP SEE PHOTO
• (2) 14” x 20’ and (1) 14” x 12’Vacuum Sizing Tanks
• 14” x 54” Conair Gatto Model206-12C Cleated Belt Puller
• Conair Model UC-7-24Automatic Upacting Saw
4.5” NRM Model 4-1/2-PMIIIExtruder; S/N 16042, 32:1 L/DRatio, Air Cooled, 7-Barrel Zones
SEE PHOTO• 24” x 12’ Vacuum Sizing Tank
SEE PHOTO• 10” x 11’ Royal Model 089 3-
Lane Cleated Belt Puller; S/N617102 (2001) SEE PHOTO
• CDS Model CTS-4-24-14Automatic Upacting Saw; S/N060304 (2003)
3.5” PTI Model 3.5-100Extruder; S/N 1351, Air Cooled,100 HP SEE PHOTO• 14” x 12’ Vacuum Sizing Tank• Conair Gatto Model 210-8P
Cleated Belt Puller• Conair Automatic Upacting
Saw3.5” Berlyn Model 3-1/2 Ext30:1 Extruder; S/N 077G818,30:1 L/D Ratio SEE PHOTO• 20” x 12’ Vacuum Sizing Tank
(13) Cleated Belt Pullers To 10”W X 60” L
10” x 11’ Royal Model 089 3-LaneCleated Belt Puller
(7) Conair Gatto Cleated Belt Pullers
6.0" PTI Model 6.0-400 Extruder
WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours
Prior to the Sale Date, if you do not you will not be approved.➢ All Internet bidders must Post a Deposit of Approx. 25% of Your
Planned Spending Budget or $5,000.00 Minimum with CincinnatiIndustrial Auctioneers in Order to be approved to Bid. Thosewho do Not Post the Deposit Will Not be Approved. Period.
(3) Late Model Conair Cleated Belt Pullers
3.5" PTI Model 3.5-100 Extruder
3.5" HPM Model 3.5TMC-30 Extruder
3.5" Sterling Model 3-1/2 30:1 Extruder
4.5" PTI Model 4.5-200 Extruder
1543867H CIA Eco-Tech Plastics-6 4/30/15 10:58 AM Page 4
ECO-TECH PLASTICS, LLCECO-TECH PLASTICS, LLC
• Conair Gatto Model 207-6PC/30 Cleated Belt Puller
• Conair Model MST8Automatic Upacting Saw
3.5” HPM Model 3.5TMC-30 Extruder; S/N 93097, 100HP (1993) SEE PHOTO• 14” x 12’ Vacuum Sizing
Tank• 12” x 48” Conair Model PC-
12-60SP Cleated Belt Puller• 28” Dia. x 15-HP Chop Saw
3.5” HPM Model 3.5TMC-30 Extruder; S/N 91518, 100HP (1991)• 14” x 12’ Vacuum Sizing Tank• Conair Gatto Model 207-
6PC-48 Cleated Puller• Conair UC-7-24 Automatic
Upacting Saw3.5” Prodex Type 3545-24Extruder; S/N 1688, Updated
Temperature Controls, 125-HP,Air Cooled Barrel• 28” Vacuum Sizing Tank• 12” x 60” Conair Cleated
Belt Puller• CDS MST-8 Automatic
Upacting Saw3.5” Sterling Model 3-1/230:1 Extruder; S/N 35806,75-HP SEE PHOTO• 14” x 12’ Vacuum Sizing
Tank• 6” x 36” RDN Model 130-
6A Belt Puller3.5” Welex Model 350-30Extruder; S/N 200, AirCooled, 100-HP, 30:1 L/D Ratio• 14” x 12’ Vacuum Sizing
Tank• Conair Gatto Model 210-8
Puller• 12” Brabor Automatic Saw
70 MM PFEX Model PH-250-H1010100 Extruder;S/N 911001B, 24:1 L/D, AirCooled, 4-Barrel Zones, 50 HPAC Motor, Barber ColmanTemp Controls SEE PHOTO• 14” x 12’ Gatto Tank• 7” x 36” Conair Gatto
Cleated Puller• 20” Brabor Automatic Saw
2.5” NRM Extruder; AirCooled, 24:1 L/D Ratio, 4-Barrel Zones, 3-Die Zones, 50-HP Baldor Motor, RelianceDrive SEE PHOTO• 14” x 12’ Conair Gatto
Vacuum Sizing Tank• Gatto Model 207-6PC/30
Cleated Puller• 15” Brobar Inline Saw
EXTRUSION LINES WILLBE SOLD PIECEMEAL
(10) Conair Gatto 12’ Vacuum Sizing Tanks (13) Vacuum Sizing Tanks To 24” W X 20’ L
4.5" NRM Model 4-1/2-PMIII Extruder
(15) Upacting Saws (5) Late Model ConairUpacting Saws
CDS Model CTS-4-24-14 Automatic Upacting Saw
3.5" Berlyn Model 3-1/2 Ext 30:1 Extruder
2.5" NRM Extruder
6” Davis Standard Thermatic 60T Extruder
1543867H CIA Eco-Tech Plastics-6 4/30/15 10:58 AM Page 5
THURSDAY, MAY 28THTHURSDAY, MAY 28TH
GRINDERS / SHREDDERS 75-HP Vecoplan Type RG-52/75/SPK CentralShredder; S/N 7666010, PLCControl (2004) SEE PHOTO50-HP Vecoplan TypeVAZ-200 CentralShredder; S/N 11983/90,Motor Needs Rebuild (1990)
SEE PHOTO150-HP AM IndustriesModel 1128A200 CentralGrinder; S/N A7501007-1,20” X 48” Opening
SEE PHOTO• 24” X 20’ Long Rubber Belt
Incline Conveyor• 10 HP Blower and Cyclone
Approx. 125-HP RapidModel 2442 CentralGrinder; 24” X 42” Opening
SEE PHOTO• 22” X 20’ Rubber Belt
Incline Conveyor
• 10 HP Blower and Cyclone 15 HP Foremost ModelHD6 Grinder Various Grinder Blades,Cyclones, Blowers andPumps
MATERIAL HANDLING / DRYING EQUIPMENTUna-Dyn Central Blendingand Drying SystemConsisting of; Model Hi-Cap Blender; S/N 121953.01-0594, Model HD-40 HopperDryer, (2) Large InsulatedHopper Dryers 4’ X 4’ X 4’ Una-DynMaterial Separator withGaylord Dumper andBlower(2) Large Whitlock CentralDryers SEE PHOTOConair 52” X 84” HighInsulated Dryer Hopper
Novatec 48” x 96” HighInsulated Dryer Hopper(10) Vacuum Pumps andCyclones to 20 HP(10) Various Hoppers andHolding Bins in Silos to96” X 96” 48” X 84” Mfg. UnknownCross Belt MagnetKice and AspirationSystemsNumerous Pumps,Blowers, Cyclones,Feeders, Conveyors,Piping, Filters
BLENDERS48” X 48” X 72” SudengaStainless Steel RibbonBlender SEE PHOTO30” Deep X 72” Wide Mfg.Unk. Material BlenderHydra-Color 4-ComponentMaterial Blender
SEE PHOTO
Central Drying System w/ Hoppers, Pumps, & Related
150-HP AM Industries Model 1128A200 CentralGrinder
Approx. 125-HP Rapid Model 2442 CentralGrinder
(10) Conair Gatto Pullers & (3) Brabor Saws
50-HP Vecoplan Type VAZ-200 Central Shredder
(2) Large WhitlockCentral Dryers
75-HP Vecoplan Type RG-52/75/SPK Central Shredder
(2) Large WhitlockCentral Dryers
Hydra-Color 4-ComponentMaterial Blender
48” X 48” X 72” SudengaStainless Steel RibbonBlender
NEW2004
1543867H CIA Eco-Tech Plastics-6 4/30/15 10:58 AM Page 6
THURSDAY, MAY 28THTHURSDAY, MAY 28TH
GUILLOTINE 36” Wide Custom BuiltGuillotine with 15 HPHydraulic Unit SEE PHOTO
SAWS 144” Wide Heartland Faband Machine AdjustableHead Saw; 30” Diameter Blades,15 Hp Motors, PneumaticClamping, Jet Bag Type DC onEach Head, Material Conveyor
SEE PHOTOFast Line Model FLE SuperEdger Pass-Thru Rip Saw;S/N 822981, 30 HP, 16” Wide, 4-Blades SEE PHOTOWhirlwind AutomaticUpacting Saw SEE PHOTO6’ X 12’ SSC Panel Saw
SEE PHOTO12” Grizzly Table Saw (10) Mitre Saws by Boschand Others
BALERS4’ X 4’ X 6’ CompacSpecialties HydraulicHorizontal Cardboard Baler,30 HP SEE PHOTOFox Model 60 HydraulicBaler; S/N 871114, 30” x 60”
SEE PHOTO
FORK LIFTS 8,000 Lb. Clark ModelEC50080 Sit Down ElectricLift Truck; S/N E685-0096-8910FD, 3-Stage Mast, 8’ Forks,
Battery Looks New8,000 Lb. Clark Model C500-Y100 LP Gas Pneumatic TireLift Truck; S/N 9075K0F, 3-Stage Mast, 7’ ForksSEE PHOTO5,000 Lb. Tusk Model500PG-16 LP Gas PalletTruck Lift Truck; S/N205034A, 3-Stage Mast, 6,600Hours (2006) SEE PHOTO(5) 5,000 Lb. Hyster ModelE50XL Sit-Down Electric LiftTrucks; S/N C108V18599P,C108V17053N, 08496K, 18613P,17052N, 187” Lift SEE PHOTO4,000 Lb. Komatsu ModelFG20ST-12 LP Gas SolidTire Lift Truck; S/N 557660A,3-Stage Mast, 12,000 Hours3,000 Lb. Kalmar ModelC30AXPS LP Gas Solid TireLift Truck; S/N 672031A,11,200 Hours, 3-Stage Mast
SEE PHOTO3,000 Lb. Tusk Model350CG17 LP Gas Solid TireLift Truck; S/N 673175A, 8,900Hours, 3-Stage Mast(5) 3,000 Lb. Yale ModelESC030 Stand-Up ElectricLift Trucks; S/N N49272,N440745, 126” Lift, NewerBatteries2,500 Lb. Hyster Challenger25 Pneumatic Tire LP GasLift Truck(12) Various 24-Volt and 36-Volt Battery Chargers
SHOP AND SUPPORTEQUIPMENT 1988 Mack 24’ Box Truck w/400,000 Miles SEE PHOTOApprox. 5,000 Lb. CapacityDigital Platform Scale withRead Out4,000 Lb. Little Model 40-18Motorized Uncoiler; S/N S-8927-72, 15” ID, 20” OD12” Mandrel MotorizedUncoilerJBI Model 630G32-10-30YLSFilter Press; S/N 4387, (11) 24”x 24” Plates(10) Pallet Trucks, PlasticStrapping and Steel BandingOutfits (10) Various Size and StyleStandard Self DumpingHoppers(250) Approx. 43” X 43”Plastic Skids(25) 45” X 48” CollapsiblePlastic Tubs Various Dissembled PalletRack Including (25) Uprightsand (200) Beams(50) 44” X 56” X 36” DeepCollapsible Side StackingMaterial Bins SEE PHOTO
MAINTENANCEEQUIPMENTMaintenance Equipment andParts Consisting of; VerticalBand Saws, Hydraulic Presses,D.E. Grinders, Drills, Tools,Motors, Breakers, Electrics,Hydraulics and Related
(50) 44” X 56” X 36” DeepCollapsible Side StackingMaterial Bins
6’ X 12’ SSC Panel Saw WhirlwindAutomatic UpactingSaw
Fox Model 60Hydraulic Baler
4’ X 4’ X 6’ Compac Specialties HydraulicHorizontal Cardboard Baler
1988 Mack 24’ Box Truck w/ 400,000 Miles
36” Wide Custom Built Guillotine with 15 HPHydraulic Unit
Fast Line Model FLE Super Edger Pass-Thru RipSaw
144” Wide Heartland Fab and MachineAdjustable Head Saw
(5) 5,000 Lb. Hyster Model E50XL Sit-DownElectric Lift Trucks
8,000 Lb. Clark Model C500-Y100 LPGas Pneumatic Tire Lift Truck
3,000 Lb. Kalmar Model C30AXPSLP Gas Solid Tire Lift Truck
5,000 Lb. Tusk Model 500PG-16LP Gas Pneumatic Tire TruckLift Truck
1543867H CIA Eco-Tech Plastics-6 4/30/15 10:57 AM Page 1
All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.
15% ONSITE BUYER’S FEE 18% ONLINE BUYER’S FEE
TERMS OF SALE
AUCTIONEERS
From I-94 approx. 60 Miles North of Chicago and approx. 20Miles South of Milwaukee Exit at No. 335 WI St. Rt. 11. ProceedWest on WI-11 for Approx. 14 Miles to WI-83 BYPASS (theBurlington Bypass). Turn left (south) on WI-83 BYPASS and pro-ceed 3 miles to left onto S. Pine St. / WI-83. Proceed 1/2 mile toauction site on left. Look for Auction Parking and Sale Entrancesigns and arrows. For GPS, use 6455 S. Pine Street.
DIRECTIONS
THURSDAY, MAY 28THTHURSDAY, MAY 28TH
SALE DATE:Thursday, May 28th
STARTING AT 9:00AMINSPECTION:
Wednesday, May 27th10:00 AM to 4:00 PM
FIRST CLASS MAIL! PRE-SORTFIRST CLASS
U.S. POSTAGEPAID
CINCINNATI, OHIOPERMIT NO. 3593
Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞
ECO-TECHPLASTICS, LLC
COMPLETE PROFILE EXTRUSION PLASTIC LUMBER MANUFACTURING AND PLASTIC RECYCLING FACILITY INCLUDING (12) EXTRUSION LINES TO 6”,
GRINDERS TO 150-HP, MATERIAL HANDLING EQUIPMENT, FORK LIFTS, SHOP ANDSUPPORT EQUIPMENT
Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.
PHOTOGRAPHY BY THE A-TEAM
IMPORTANT NOTICE:
ECO-TECHPLASTICS, LLC
1956 S. Pine Street – Burlington, Wisconsin 5310560 Miles North of Chicago
Large Qty. DownstreamLarge Qty. DownstreamLarge Qty. Downstream Grinder & Shredder SystemsGrinder & Shredder SystemsGrinder & Shredder Systems
(13) Extrusion Lines(13) Extrusion Lines(13) Extrusion Lines Late Model ExtrudersLate Model ExtrudersLate Model Extruders
ECO-TECHPLASTICS, LLC
ECO-TECHPLASTICS, LLC
1956 S. Pine StreetBurlington, Wisconsin 53105
60 Miles North of Chicago
Plant Closed
Cincinnati Industrial AuctioneersRegistered Wisconsin Auction Company License No. 172-053
Jeffrey L. LuggenRegistered Wisconsin Auctioneer License No. 1148-052
Plant Closed
CINCINNATIINDUSTRIALAUCTIONEERS
auctioneers | appraisers | since 1961
Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com
CINCINNATIINDUSTRIALAUCTIONEERS
auctioneers | appraisers | since 1961
Sale Under The Management Of
Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]
In Conjunction with, Technical Advisors
847-956-7300 www.arlingtonmachinery.com
1543867H CIA Eco-Tech Plastics-6 4/30/15 10:57 AM Page 2