Plant Closed BIGELOW COMPONENTSs3.serverdata.com/.../Bigelow_Components_Brochure.pdf(15) OBI Presses From 20 Ton to 60 Ton Mori Seiki CL-150M Three-Axis CNC Turning Center (2 of 4)

PRECISION COMPONENTS MANUFACTURING FACILITY WITH EXTENSIVE CAPABILITIESIN COLD HEADING AND STAMPING INCLUDING (40) SMALL PARTS COLD HEADERS,

OBI PRESSES, COMPLETE TOOL SHOP, PARTS FINISHING AND SUPPORT EQUIPMENT

PRECISION COMPONENTS MANUFACTURING FACILITY WITH EXTENSIVE CAPABILITIESIN COLD HEADING AND STAMPING INCLUDING (40) SMALL PARTS COLD HEADERS,

OBI PRESSES, COMPLETE TOOL SHOP, PARTS FINISHING AND SUPPORT EQUIPMENTSee Instructions on Page 2

To Become a Qualified Bidder on the Internet

5/32” Nakashimada Model NP-40 High Speed Two-Die Three-BlowCold Header

(8) Hardinge HLV-H Precision Lathes

(15) OBI Presses From 20 Ton to 60 Ton

Mori Seiki CL-150M Three-Axis CNCTurning Center

(2 of 4) Nakashimada NP-40, PF-630 and PF-420 Cold Headers

Plant Closed

BIGELOW COMPONENTSBIGELOW COMPONENTS74 Diamond Road – Springfield Township, NJ 07081

10 Miles West of Newark, New Jersey

SALE DATE: TUESDAY, DECEMBER 13TH, STARTING AT 9:00 AMSALE DATE: TUESDAY, DECEMBER 13TH, STARTING AT 9:00 AMINSPECTION: MONDAY, DECEMBER 12TH FROM 10:00 AM TO 4:00 PM

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

1647991A CIA Bigelow Components-6 11/16/16 3:09 PM Page 3

TUESDAY, DECEMBER 13THTUESDAY, DECEMBER 13TH

Approx. (20) RMG Turntables w/ VariousDiameters

1/8” Hunter McKenzie BullBlock

(2) .190” Hartford Model190 Horizontal HandFeed Thread Rollers

(6) 3/16” WaterburyFarrel Hipro DSSD ColdHeaders

(4) .094” Tsukiboshi ModelMT-200 DSSD Tubular RivetHeaders

5/16” Waterbury Farrel 5/16 Hipro DSSD ColdHeader

.157” Asahi Okuma Model AOT-4B Two-Die Two-Blow High Speed Cold Header

(2) .158” Nakashimada Model PF-420 Two-DieThree-Blow Cold Headers .237” Nakashimada Model PF-630 Two-Die Three-Blow

Cold Header5/32” Nakashimada Model NP-40 High Speed Two-DieThree-Blow Cold Header

(2) .158” Nakashimada Model PF-420 Two-DieThree-Blow Cold Headers

WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior

to the Sale Date, if you do not you will not be approved.➢ All Internet bidders must Post a Deposit of Approx. 25% of Your

Planned Spending Budget or $5,000.00 Minimum with CincinnatiIndustrial Auctioneers in Order to be approved to Bid. Thosewho do Not Post the Deposit Will Not be Approved. Period.

MULTI-DIE & PROGRESSIVECOLD HEADERS6 mm Ceva Model NF54 Four-DieCold Header; 2-6 mm Cut-OffDiameter, 10 - 50 mm Working Length,100 PPM, Equipped w/ PKO 1-3, AirClutch3/16” National Four-Die ProgressiveCold Header; S/N 23678, 3/16” Cut-OffDiameter, 1-1/2” Die Kickout, 2-1/4” Cut-Off Length, 110 PPM, Equipped w/Bushing Cut-Off, PKO 1-3, AC Vari-Drive,Straight Across Transfer SEE PHOTO3/16” National Four-Die ProgressiveCold Header; S/N 27062, 3/16” Cut-OffDiameter, 1-1/2” Die Kickout, 2-1/4” Cut-Off Length, 110 PPM, Equipped w/Bushing Cut-Off, Straight Across Transfer(Updated), Individual Finger OpeningCam on Transfer, PKO 1-4, Ace Monitor,Variable Speed Vari-Drive, HydraulicClamping on Kickout Adjustments, QuickAdjust on Kickout, Air Clutch, SpareTransfer & Set-Up Fixture (Machine wasCompletely Rebuilt & Upgraded Approx.1995) SEE PHOTO3.5 mm Matsumoto Model YMP-430Four-Die Micro Parts Former; 3.5mm Cut-Off Diameter, 25 mm KickoutStroke, 10 mm PKO Stroke, 120 – 200PPM, Equipped w/ Bushing Cut-Off,PKO, Individual Finger Opening TransferCam, Straight Across & Turn AroundTransfer, Stripper, Ace Monitor

SEE PHOTO

.237” Nakashimada Model PF-630Two-Die Three-Blow Cold Header;S/N 830313, .237” Max Cut-Off Diameter(100,000 PSI), 1.575” Max Cut-OffLength, 2” 1st Die Kickout, 1.181” 2ndDie Kickout, .787” 2nd Punch PKOStroke, .394” 3rd Punch PKO Stroke, 50– 170 PPM, Equipped w/ FingerlessTransfer, PKO (New 1983) SEE PHOTO5/32” Nakashimada Model NP-40High Speed Two-Die Three-BlowCold Header; S/N 90009, 5/32” Cut-OffDiameter, 1” Max Cut-Off Length, 1-3/8”Max Transferable Length, 2” 1st DieKickout, 1-3/8” 2nd Die Kickout, 5/8” 1st& 2nd Punch PKO Stroke, 1/4” 3rdPunch PKO Stroke, 60 - 240 PPM,Equipped w/ Bushing Cut-Off, PKO 1, 2& 3, Fingerless Transfer, Variable SpeedDrive, Die Relief, Face of Die Stripper(New 1990) SEE PHOTO(2) .158” Nakashimada Model PF-420 Two-Die Three-Blow ColdHeaders; S/N’s 860242 (1986) &840180 (1984), .158” Cut-Off Diameter(100,000 PSI), 1” Max Cut-Off Length, 2”1st Die Kickout, .788” 2nd Die Kickout,.590” 2nd Punch PKO Stroke, 80 - 200PPM, Equipped w/ Fingerless Transfer,PKO SEE PHOTO.157” Asahi Okuma Model AOT-4BTwo-Die Two-Blow High Speed ColdHeader; S/N 6-1045, .157” Cut-OffDiameter (100,000 PSI), .984” KickoutLength, .314” – 1.377” Min/Max Cut-OffLength, .236” PKO Stroke, 400 PPM,Equipped w/ Bushing Cut-Off, PunchKickout (New 1981) SEE PHOTO

TUBULAR RIVET HEADERS.118” Ayase Seiki Model ASOH-TRDSSD Tubular Rivet Header; S/N54301, .118” Cut-Off Diameter, .630”Shank Length, .945” Cut-Off Length, 150-250 PPM, Equipped w/ Bushing Cut-Off,Face of Die Stripper SEE PHOTO.156” Tsukiboshi Mdoel MT-350DSSD Tubular Rivet Header; S/NN/A, .156” Cut-Off Diameter, 7/8” ShankLength, 200 PPM, Equipped w/ Face ofDie Stripper.156” Tsukiboshi Model MT-300DSSD Tubular Rivet Header; S/N4903004, .156 Cut-Off Diameter, 1”Shank Length, 140 PPM, Equipped w/Face of Die Stripper(4) .094” Tsukiboshi Model MT-200DSSD Tubular Rivet Headers; S/N’s4806006, 4806008, 4806004 & N/A,.020” - .094” Min/Max Cut-Off Diameter,.437” Shank Length, 150 PPM, Equippedw/ Face of Die Stripper SEE PHOTO

COLD HEADERS – DOUBLESTROKE SOLID DIE5/16” Waterbury Farrel 5/16 HiproDSSD Cold Header; S/N 29026, 5/16”Cut-Off Diameter, 1-1/2” Shank Length,2-5/8” Cut-Off Length, 175 PPM,Machine Rebuilt, Excellent Condition

SEE PHOTO1/4” Waterbury Farrel Model #2DSSD Toggle Cold Header; S/N221108, 1/4” Cut-Off Diameter, 1-3/4”Shank Length, 2-3/8” Cut-Off Length,100 PPM


BIGELOW COMPONENTSBIGELOW COMPONENTS

(2) .070” Morris OmegaModel “00” DSSD ColdHeaders

.118” Ayase Seiki ModelASOH-TR DSSD TubularRivet Header

(17) 1/8” Waterbury Farrel Model “0” DSSD ToggleCold Headers

3/16” National Four-Die Progressive Cold Header 3/16” National Four-Die Progressive Cold Header

(6) 3/16” Waterbury Farrel Model #1 DSSD ToggleCold Headers

(6) 3/16” Waterbury Farrel 3/16 Hipro DSSD ColdHeaders

(6) 3/16” Waterbury Farrel Hipro DSSD ColdHeaders

3.5 mm Matsumoto Model YMP-430 Four-DieMicro Parts Former

(3) 1/8” National Model 25HS High Speed DSSDCold Headers

(6) 3/16” Waterbury Farrel 3/16Hipro DSSD Cold Headers; S/N’s220792, 222923 and223457 WERECONVERTED FROM #10 TUBULARRIVET HEADERS TO PRODUCE SOLIDPARTS, S/N’s 224625, 71572 & 224625-1009I ARE STANDARD SOLID , 3/16”Cut-Off Diameter, 1” Shank Length, 1-1/2” Cut-Off Length, 225 PPM

SEE PHOTO(6) 3/16” Waterbury Farrel Model#1 DSSD Toggle Cold Headers; S/N’s225076 and 86239 WERE CONVERTEDFROM 2 DIE 4 BLOW, S/N’s 143326,224210, 86905 & 12382 STANDARD,3/16” Cut-Off Diameter, 1-1/4” ShankLength, 1-3/4” Cut-Off Length, 125 PPM

SEE PHOTO(3) .169” Tsukiboshi Model MS-400 DSSD Cold Headers; .169” Cut-Off Diameter, 1” Shank Length, 240 PPM.125” Morris Omega Model “0”DSSD Cold Header; S/N 672, .060” -.125” Cut-Off Diameter, .750” ShankLength, 80 – 200 PPM(3) 1/8” National Model 25HS HighSpeed DSSD Cold Headers; S/N’s41070 (1969), 41140 (1973) & 41088(1971), 1/8” Cut-Off Diameter, 1” ShankLength, 1-1/2” Cut-Off Length, 450 PPM,Equipped w/ Bushing Cut-Off, & S/N41088 has Partial PKO Mechanism

SEE PHOTO(17) 1/8” Waterbury Farrel Model“0” DSSD Toggle Cold Headers;S/N’s 136880, 180252, 223505, 222743-1020C, 222743-1019C, 220667, 224628,22/626, 123973, 224628-224782-1165G,223387, 83948, 222907, 224628-224782-1164G, 223387 & 220667, 1/8”Cut-Off Diameter, 1” Shank Length, 1-1/2” Cut-Off Length, 150 PPM

.106” Ayase Seiki Model AS-OHDSSD Cold Header; S/N 56205, .023”- .106” Min/Max Cut-Off Diameter, .945”Cut-Off Length, .630” Shank Length, 170– 270 PPM, Equipped w/ PKO, Wiper(2) .070” Morris Omega Model“00” DSSD Cold Headers; S/N’s 881& 882, .020” - .070” Min/Max Cut-OffDiameter, .400” Shank Length, 80 – 180PPM, Cabinet Base SEE PHOTO

THREAD ROLLERS(2) .190” Hartford Model 190Horizontal Hand Feed ThreadRollers; S/N’s 236-44 & 316-51A, .060”- .190” Thread Capacity, 1-1/2” ThreadLength, 30 - 150 PPM, Equipped w/Vibratory Bowl, Adjustable Pitman

SEE PHOTO

WIRE DRAWER1/8” Hunter McKenzie Bull Block;S/N 5224, 1/8” Nominal Wire Diameter,16” Diameter Capstan, DC Vari-Drive,100 - 1,670 RPM, Power Take Up

SEE PHOTO

MISC. WIRE EQUIPMENT24” VFL Roll Bench Top Roll Sorterw/ Vibratory Bowl FeedApprox. (20) RMG Turntables w/Various Diameters SEE PHOTONew Holland Model K24 SpinDryer; S/N 965182, 12” Basket, Heater

OBI PRESSES60 Ton Bliss No. 21-1/2B OBI Press;s/n H50854/HP37823, 2 1/2” , 3 1/2”, 123/4”, Adjustable Stroke, Roll Feed, AirClutch, PB (1964) SEE PHOTO60 Ton Bliss No. 21S OBI Press; s/nn/a, ACE 100 Control Panel, PB Control,Air Clutch

40 Ton Minster No. 4 OBI Press; s/n4-14717, 2.25” Adj., 1.75” Stroke, 225SPM, 10” S.H., PA Roll Feed

SEE PHOTO

45 Ton L&J No. 45 OBI Press; s/n45783A, 2” Stroke, 3” Adj., 11-3/8” S.H.,28” x 18” Bed, Roll Feed, Air Clutch

SEE PHOTO

45 Ton Federal No. 45 OBI Press;s/n 45-240, 2” Stroke, 11-1/2” S.H., 18”x 28” Bed, 2-1/2” Adj., 80-240 SPM, V/S,Air Clutch32 Ton Federal No. 32 OBI Press;s/n 32-209, 1.5” Stroke, 90-270 SPM,15” x 24” Bed, 2” Adj., Air Clutch

SEE PHOTO

(2) 32 Ton Federal No. F3 OBIPresses; s/n 3-2339 and 2352, 1.5”Stroke, 9.25” S.H., 12 x 21” Bed, (1) w/Roll Feed, Palm and PB Control22 Ton Federal No. 22 OBI Pressw/ Roll Feed; s/n 22-155, 1” Stroke,9.25” S.H., 12” x 20” Bed, 100 to 310SPM, PA Roll Feed20 Ton (Approx.) BenchmasterModel 252 OBI Press w/ IndexingTable20 Ton Comamet Model T20 OBIPress; s/n 3918A, 200 SPM, 2-3/4”Stroke, 13” x 20” Bed, Palm Button, AirClutch20 Ton Federal F2 OBI Press; s/n2255, 2” Stroke, 8.25” SH, 10” x 17”Bed, V/S Drive(5) 20 Ton (Approx.) BenchmasterModel 252 OBI Presses w/ BowlFeeds and Pick and Place Loaders

Rebuilt &Upgraded

15% ONSITE BUYERS PREMIUM 18% ONLINE BUYERS PREMIUM


www.cia-auction.comwww.cia-auction.com

Waste Water System w/ 12-Plate Filter Press and 500 Gallon PolyTanks

Jenfab Lean Clean 360 BasketAqueous Parts Washer

FEED EQUIPMENT(3) 4” and 6” Rapid Air Model104CJ and 106CJ Servo Feeds

SEE PHOTO

(3) 4” - 6” Wide US ToolMotorized Roll Straighteners

SEE PHOTO

(10) PA Industries Motorized andManual Uncoilers from 100 Lb. to500 Lb. SEE PHOTO

6” Jayco 7-Roll Straightener1,600 Lb. Coiltech Model 2063Power UncoilerMiscellaneous Press Feeds,Vibratory Bowls and Air Feeds

PARTS FINISHING ANDWASTE WATERWaste Water System w/ 12-PlateFilter Press and 500 Gallon PolyTanks SEE PHOTO

Jenfab Lean Clean 360 BasketAqueous Parts Washer; s/n 1123,PLC, 16” x 8” x 4” Approx. Basket Size(New 2004) SEE PHOTO

3-Station Barrel Tumbler w/ 18” x10” Tubs30” Dia. X 12” Deep VibratoryBowl36” Dia. X 12” Deep WheelabratorModel B30 Vibratory Bowl; s/nHD9481(2) 16” x 16” x 16” VibratoryTubs3-Station Barrel Tumbling BenchDip Type Washing Tank w/ Hoist(3) New Holland Centrifugal PartsDryers

AIR COMPRESSORS75 HP Kaeser Model CS-90 RotaryScrew Air Compressor

40 HP Kaeser Model BS-51 RotaryScrew Air Compressor; s/n NA,2,300 Run Hours Showing, 20,000 OnHours Showing SEE PHOTO

10 HP Joy Twistair HorizontalTank Air Compressor(2) Kaeser KRD-400 Air Dryers

SHOP AND SUPPORTEQUIPMENT5,000 Lb. (Approx.) DigitalPlatform Scale w/ 4’ x 4’ PlatformTennant Model 1120 Walk BehindScrubberShop and Support EquipmentConsisting of; Machine and BuildingMaintenance Parts, Hand Tools, ShopFans, (20) Sect. Adj. Pallet Rack, PalletTrucks, Crank Type Die Carts, ElectricHoists, Benches, Shelving, ShippingEquipment, 300 Lb. A-Frame andRelated

NEW2004

60 Ton Bliss No. 21-1/2B OBI Press 40 Ton Minster No. 4 OBI Press

(10) PA Industries Motorized and ManualUncoilers from 100 Lb. to 500 Lb.

(3) 4" - 6" Wide US Tool Motorized RollStraighteners

(5) 20 Ton (Approx.) Benchmaster Model 252 OBIPresses w/ Bowl Feeds and Pick and Place Loaders

45 Ton L&J No. 45 OBIPress

32 Ton Federal No. 32OBI Press

(3) 4” and 6" Rapid Air Model 104CJ and 106CJServo Feeds



SHOP AND SUPPORTEQUIPMENT5,000 Lb. (Approx.) DigitalPlatform Scale w/ 4’ x 4’ PlatformTennant Model 1120 Walk BehindScrubberShop and Support EquipmentConsisting of; Machine and BuildingMaintenance Parts, Hand Tools, ShopFans, (20) Sect. Adj. Pallet Rack, PalletTrucks, Crank Type Die Carts, ElectricHoists, Benches, Shelving, ShippingEquipment, 300 Lb. A-Frame andRelated

CNC TURNING CENTERMori Seiki CL-150M Three-AxisCNC Turning Center; s/n 401,(3/1999), MSC-803 Control, ColletChuck, 6” Chuck, Live Tooling

SEE PHOTO

CENTERLESS GRINDERRoyal Master Model TG12X4Centerless Grinder; s/n 2680,Rebuilt, Hydraulic Dressers

SEE PHOTO

HARDINGE LATHES(8) Hardinge HLV-H PrecisionLathes; s/n 4464, 4877, 10769, 184,8045, 469, 4115, 1175, Some w/ Taper,Tooling SEE PHOTO

ENGINE LATHE15” x 50” Clausing Geared HeadEngine Lathe; s/n TG00056, 2,000RPM, Chucks, Tooling (1997)

SEE PHOTO

MILLING MACHINES2 HP Bridgeport Series I VerticalMill; s/n 204157, Digital Readout, 48”Table

1-1/2 HP Bridgeport 8-SpeedVertical Mill; s/n 1518221 HP Bridgeport 8-Speed VerticalMill

SINKER EDM’S(2) Charmilles Model D10 BenchTop Die Sinker EDM Machines; s/n31789, 29384, System 3R Rotary Head,P25 Power Supplies SEE PHOTO

System 3R Tooling and Accessories

GRINDERS (8) 6” x 12” Harig Hand FeedSurface Grinders6” x 18” Boyar Schultz Hand FeedSurface Grinder6” x 12” Harig Hand Feed SurfaceGrinder with Digital Readout10” x 20” Jones and Lamson O.D.Grinder6” x 18” Boyar Schultz HydraulicSurface GrinderCosa Single Lip Tool GrinderTorit Dust CollectorGrinding Accessories Like HarigGrind-All Fixtures, ColletIndexers, Wheel Dressers,Precision V-Blocks and Related

MISC. TOOLROOMMACHINERYSentry Model AY Size 2 ElectricFurnace; S/N A85895, 14.5 KW, 2,500Degree, Digital Controls50 Ton Dake Model 50H HydraulicPress; s/n 197105 SEE PHOTO

Sunnen MBB-1660 Precision Hone;s/n 92823 w/ Tooling SEE PHOTO

Rocklinizer Model 600 MetalizingGun

20” Grob Model 4V-18 VerticalBand Saw w/ Blade Welder20” Wilton Model 3Z713 FloorDrill24” Cyclone Poly Bench Top BlastCabinet(8) Various D.E. Grinders, Sandersand Related8” X 12” Kalamazoo HorizontalBand Saw36” Pexto Kick Shear4’ Tennsmith Hand BrakeMachine Accessories and ToolingIncluding; Vises, Demag Units, CrankType Die Carts, Magnetic Chucks,Collets, Hold Downs, Perishable Toolingand Related

OPTICAL COMPARATORSAND INSPECTION (4) 14” Gage Master Model 29/GM4Optical Comparators; s/n 143519486,Digital Readout SEE PHOTO

Inspection Tools Consisting of; (15)Various Shop Floor Type Microscopes byOlympus, Amscope and Others, (10) PinGage Sets Including (1) 4-Drawer, (10)18” x 24” Bench Top Granite Plates,Wilson 1JS and 3JR Hardness Testers,Indicators, Calipers, Gauge Blocks andRelated

40 HP Kaeser Model BS-51 RotaryScrew Air Compressor

50 Ton Dake Model 50HHydraulic Press

(4) 14" Gage MasterModel 29/GM4 OpticalComparators

Sunnen MBB-1660Precision Hone

Royal Master Model TG12X4Centerless Grinder

(2) Charmilles Model D10 Bench Top Die SinkerEDM Machines

15" x 50" Clausing Geared Head Engine Lathe

2005 Harley Davidson Electra Glide ScreamingEagle

Mori Seiki CL-150M Three-Axis CNC Turning Center (8) Hardinge HLV-H Precision Lathes

(11) Hand Feed Surface Grinders

HARLEY DAVIDSONMOTORCYCLE2005 Harley Davidson ElectraGlide Screaming Eagle; 103 InchScreaming Eagle Engine, 5 SpeedTrans, Fuel Injected, 8300 Miles, OilCooler, Am/Fm Radio/CdPlayer/Weather, Alarm, ElectronicCruise Control, Intercom, Tour PakW/ Quick Disconnect SEE PHOTO


All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM 18% ONLINE BUYER’S PREMIUM

TERMS OF SALE

AUCTIONEERS

From the Garden State Parkway just south of thejunction of I-78. Exit at No. 140B US-22W towardElizabeth Somerville. Proceed Approx. 3-1/2 MilesWest on US-22 and make a U-Turn to head backeast on US-22 to an immediate right on to FademRd.. to immediate right onto Diamond Rd. and salesite on left.

DIRECTIONS


SALE DATE:TUESDAY, DECEMBER 13TH

STARTING AT 9:00AMINSPECTION:

Monday, December 12th10:00 AM to 4:00 PM

FIRST CLASS MAIL! PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

BIGELOWCOMPONENTS

PRECISION COMPONENTS MANUFACTURING FACILITY WITHEXTENSIVE CAPABILITIES IN COLD HEADING AND STAMPINGINCLUDING (40) SMALL PARTS COLD HEADERS, OBI PRESSES,

COMPLETE TOOL SHOP, PARTS FINISHING AND SUPPORT EQUIPMENT

Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

BIGELOWCOMPONENTS

74 Diamond Rd.Springfield Township, NJ 07081

10 Miles West of Newark, New Jersey

Complete ToolroomComplete ToolroomComplete Toolroom (15) OBI Presses(15) OBI Presses(15) OBI Presses

Nakashimada HeadersNakashimada HeadersNakashimada Headers National HeadersNational HeadersNational Headers

BIGELOWCOMPONENTS

BIGELOWCOMPONENTS

74 Diamond Rd.Springfield Township, NJ 0708110 Miles West of Newark, New Jersey

Plant Closed

Jeffrey L. LuggenJoseph M. Luggen

John F. Rome

Plant Closed

CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760


Documents

Plant Closed BIGELOW COMPONENTSs3.serverdata.com/.../Bigelow_Components_Brochure.pdf(15) OBI Presses From 20 Ton to 60 Ton Mori Seiki CL-150M Three-Axis CNC Turning Center (2 of 4)