Upload
trancong
View
214
Download
1
Embed Size (px)
Citation preview
41
Planetary Gearboxes PLGPlanetengetriebe PLG
PLG 32 The planet gears of the first reductionstage are plastic, the planet gears ofthe second and third stages are metal.
PLG 42 K The planet gears of all reduction sta-ges are plastic. This gearbox is onlyavailable for projects.
PLG 42 S The planet gears of the first reductionstage are plastic in two and three-stage gearboxes, the ring gear andplanet gears of the second and thirdstages are metal.
PLG 52 The planet gears of the first reductionstage are plastic, the planet gears ofthe second and third stages are metal.Special versions are available with awelded shaft.
PLG 52 H The planet gears of the first reductionstage are plastic helical spur gears forespecially quiet running. Both plasticand metal versions are possible.Versions with the gear in one piecewith its shaft (marked yellow in thetable) are only available on request.
PLG 60 The planet gears of the first reductionstage are helical spur gears for espe-cially quiet running. The plastic planetgears run in an aluminum ring gear.
PLG 70 The planet gears of the first reductionstage are plastic; the planet gears ofthe second and third stages are metal.
PLG 75New planetary gearbox in one, two andthree stage versions. The gearbox isoptimized for combinations with the newmotor BG75 and delivers continuoustorque of max 160 Nm. The gearbox isavailable in many ratios from 4:1 to700:1.
PLG 32Die Planetenräder der 1. Getriebestufesind aus Kunststoff, die Planetenräderder 2. und 3. Stufe aus Metall.
PLG 42 K Die Planetenräder aller Getriebestufensind aus Kunststoff. Dieses Getriebe istnur für Projekte erhältlich.
PLG 42 S Die Planetenräder der 1. Getriebestufesind bei der 2- und 3-stufigen Versionaus Kunststoff. Hohlrad und Planeten-räder der 2. und 3. Getriebestufe sindaus Metall.
PLG 52Die Planetenräder der 1. Getriebestufesind aus Kunststoff, die Planetenräderder 2. und 3. Stufe aus Metall.Sonderausführungen mit geschweißterWelle sind erhältlich.
PLG 52 H Die Planetenräder der 1. Getriebestufesind aus Kunststoff und schrägver-zahnt für besondere Laufruhe. Bei der2- und 3-stufigen Version sind Kunst-stoff- oder Metallausführungen mög-lich. Ausführungen mit verzahnterWelle (in der Datentabelle gelb gekenn-zeichnet) sind nur auf Anfrage erhält-lich.
PLG 60 Die Planetenräder der 1. und 2. Stufesind schrägverzahnt für besondereLaufruhe. Dabei bewegen sich diePlanetenräder aus Kunststoff in einemHohlrad aus Aluminium.
PLG 70 Die Planetenräder der 1. Getriebestufesind aus Hartgewebe, die Planeten-räder der 2. und 3. Stufe aus Metall.
PLG 75 Neues Planetengetriebe in 1-, 2- oder 3-stufiger Ausführung. Mit seinem hohenDauerdrehmoment von bis zu 160 Nmund zahlreichen Untersetzungen von 4 :1 bis über 700 :1 ist das Getriebeoptimal zum Anbau an den neuen MotorBG 75 geeignet.
PLG
Planetary Gearboxes PLGPlanetengetriebe PLG
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/RadiallastStandard/Standard On request/auf Anfrage
PLG 70
4 5.85 7 16 23.2 28 33.64 40.6 49 64 92.8 112 134.56 162.4 195.112 235.48 284.2 343
0.85 0.72 0.61
1 2 3
500 4000 6000
1.7 2.3 3.1
1000/ 650 1000/ 650 1000/ 650
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
PLG 60 Low Noise
3 4 7 10 12 16 21 30 40 49 70
0.9 0.81
1 2
500 2500
0.55 0.78
500/350 500/350
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
PLG 52 H Low Noise
4.5 6.25 8 15 20.25 28.12 36 50 64 91.12 126.56 162 225 288 400 512
0.9 0.81 0,73
1 2 3
120 800 2400
0.6 0.72 0.88
500/ 350 500/ 350 500/ 350
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
PLG 52.0
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
PLG 42 S
4 6.25 8 16 25 32 50 64 100 128 156 200 256 312.5 400 512
0.9 0.81 0.73
1 2 3
350 600 1400
0.27 0.37 0.47
150/ 200 150/ 200 150/ 200
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
(Ncm)
(kg)
(N)
PLG 32.0
4.5 6.25 20.25 36 50 91.12 162 288 400
0,9 0,81 0,73
1 2 3
40 150 400
0.14 0.18 0.23
30/100 30/100 30/100
4.5 6.25 8 15 20.25 28.12 36 50 64 91.12 126.56 162 225 288 400 512
0.9 0.81 0.73
1 2 3
120 800 2400
0.55 0.72 0.88
500/ 350 500/ 350 500/ 350
(Ncm)
(kg)
(N)
(Ncm)
(kg)
(N)
(Ncm)
(kg)
(N)
(Ncm)
(kg)
(N)
(Ncm)
(kg)
(N)
40
NEW +++ NEU +++ NEW +++ NEW +++ NEU +++ NEW +++ NEU
4342
1 2 3
157 189 221
182 214 246
207 239 271
242 274 306
267 299 331
292 314 356
189 221 253
214 246 278
239 271 303
197 229 261
222 254 286
247 279 311
82 114 146
PLG
PLG 42 S/PLG 42 K
PLG 32
PLG 32 + BG 31
PLG 42 + BG 44 SI
PLG 52 + BG 44 SI PLG 52 + BG 65
PLG 60 + BG 65
Motor
Lengths L motor gearbox combination / Länge L Antrieb (mm +/- 2)
1 2 3
121.8 133.6 145.4
146.8 158.6 170.4
136.8 148.6 160.4
161.8 173.6 185.4
191.8 203.6 215.4
216.8 228.6 240.4
46.8 58.6 70.4
1 2 3
125 140.5 155.5
150 165.5 180.5
140 155.5 170.5
165 180.5 195.5
195 210.5 225.5
220 235.5 250.5
125 140.5 155.5
150 165.5 180.5
175 190.5 205.5
210 225.5 240.5
235 250.5 265.5
260 275.5 290.5
157 172.5 187.5
182 197.5 212.5
207 222.5 237.5
165 180.5 195.5
190 205.5 220.5
215 230.5 245.5
50 65.5 80.5
1 2
131 158
156 183
181 208
216 243
241 268
256 293
163 190
188 215
213 240
171 198
196 223
211 248
56 83
PLG42S/PLG42K PLG 52/ PLG 52 H PLG 60 PLG 70
Dimensions of PLGMaßzeichnungen PLG
Dimensions of PLGMaßzeichnungen PLG
Motor
StagesStufenzahl
BG 31x20 KIBG 40x25BG 40x50BG 44x25 SIBG 44x50 SIBG 44x25 CIBG 44x50 CIBG 65x25BG 65x50BG 65x75BG 65x25 PIBG 65x50 PIBG 65x75 PIBG 65x25 SIBG 65x50 SIBG 65x75 SIBG 65x25 CI/MIBG 65x50 CI/MIBG 65x75 CI/MIGearbox without motorGetriebe ohne Motor
1 2 395 105 115
30 40 50
PLG 32
PLG 60
PLG 70
Motor
Motor
PLG 52
Motor
PLG 70 + BG 65
PLG 52 H
Motor
Dimension drawings of complete drives (motor and gear) are available at www.dunkermotoren.com (Products -> direct selection)Maßzeichnungen von kompletten Antrieben (Motor-Getriebe-Kombinationen) erhalten Sie auf unsere Homepage: www.dunkermotoren.de (Produkte -> direkte Produktauswahl)
+1
Ø 32
M 3
0
Ø 60
-0.5
26 ±0.1
20 -0.033
A0.2
4 -0.5
M 3
L
45°0.03
A0.05
3
20 ±0.6
0.7 +0.3
Ø 6
+0.00
8A
M 3M 4
AA0.2
0.236 ±0.15
32 ±0.15
25 -0.052
L
Ø 42
15 ±3
Woodruff key/Scheibenfeder2 x 3.7
0.03
0.05 A
Ø 8
+0.00
1
A
0.8 +0.4
2
25 -0.5
M 5
7.5 Dept
h/Tiefe
40 ±0.1
0.2 A40 ±0.1
0.2 A
7.5 Depth/Tiefe
M 5
L 25 ±1
3
CB
Ø 52
A
+0.00
8
Ø 32
-0.03
9
12
0.03
A0.05AWoodruff key/Scheibenfeder4 x 6.5DIN 6888 Series A
M 57.5 Depth/Tiefe
40 ±0.1
0.2 A40 ±0.1
0.2 A
7.5 Dept
h/Tiefe
Ø 52
PLG 52 H + BG 65PLG 52 H + BG 44 SI
M 5
L
Woodruff key/Scheibenfeder4 x 6.5DIN 6888 Series A
A 0.05 A
0.03
12
B
3
25 ±1
C
+0.00
8Ø
12 +0
.003 A
Ø 32
-0.03
9
52 ±0.1
40 h7
M 5
0.2 A
L
A5
32 ±0.8
Parallel key/Passfeder5 x 5 x 20 DIN 6885
Ø 15
h5
0.03
A0.06
Ø 75 -0.5
65 ±0.10
50 ±0.011
0.25 AA0.1
A4xM 6
45°±1.00°
90°±1.00°
M 617 Depth/Tiefe
L
Ø 70
±0.3
17.549 ±1
40
18+2 M
6
5
6 Ø 19
h7 0.03
0.06 A
Depth/Tiefe
+0.00
7
Ø 12
+0.00
3
0
Parallel key/Passfeder6 x 6 x 28 DIN 6885
Planetary Gearboxes PLGPlanetengetriebe PLG
PLG 24Ring gearing and planetary wheels aremanufactured from plastic. The outputshaft runs in a self-lubricating cylinderbearing.
PLG 30The planet gears are partially plastic,partially metal.
PLG 32 The planet gears of the first reductionstage are plastic, the planet gears ofthe second and third stages are metal.
PLG 42 K (plastic)The planet gears of all reduction sta-ges are plastic. This gearbox is onlyavailable for projects.
PLG 42 S (metal)The planet gears of the first reductionstage are plastic in two and three-stage gearboxes, the ring gear andplanet gears of the second and thirdstages are metal.
.
PLG 24Hohlrad und Planetenräder sind ausKunststoff gefertigt. Die Ausgangswelleist in einem selbstschmierendenZylinderlager gelagert.
PLG 30Die Planetenräder sind teilweise ausKunststoff, teilweise aus Metall.
PLG 32Die Planetenräder der 1. Getriebestufesind aus Kunststoff, die Planetenräderder 2. und 3. Stufe aus Metall.
PLG 42 K (Kunststoff)Die Planetenräder aller Getriebestufensind aus Kunststoff. Dieses Getriebe istnur für Projekte erhältlich.
PLG 42 S (Metall)Die Planetenräder der 1. Getriebestufesind bei der 2- und 3-stufigen Versionaus Kunststoff. Hohlrad und Planeten-räder der 2. und 3. Getriebestufe sindaus Metall.
Planetary Gearboxes PLGPlanetengetriebe PLG
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
PLG 42 K
4 6.25 8 16 25 32 50 64 100 128 156 200 256 312.5 400 512
0.9 0.81 0.73
1 2 3
70 130 300
0.16 0.20 0.25
150/ 200 150/ 200 150/ 200
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
(Ncm)
(kg)
(N)
PLG 30
4.5 6.25 20.25 36 50 91.12 162 288 400
0.9 0.81 0.73
1 2 3
40 80 180
0.05 0.08 0.09
10/24 10/24 10/24
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
(Ncm)
(kg)
(N)
PLG 32
4.5 6.25 20.25 36 50 91.12 162 288 400
0.9 0.81 0.73
1 2 3
40 150 400
0.14 0.18 0.23
30/100 30/100 30/100
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
(Ncm)
(kg)
(N)
PLG 24
(Ncm)
(kg)
(N)
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
(Ncm)
(kg)
(N)
PLG
4.33 6 18.75 33.2 46 81.2 143.8 199.3 276 353
0.91 0.83 0.76
1 2 3
30 45 60
0.019 0.025 0.035
5/12 5/12 5/12
4 6.25 8 16 25 32 50 64 100 128 156 200 256 312.5 400 512
0.9 0.81 0.73
1 2 3
350 600 1400
0.27 0.37 0.47
150/ 200 150/ 200 150/ 200
PLG 42 S
Standard/Standard On request/auf Anfrage
3938
Planetary Gearboxes PLGPlanetengetriebe PLG
PLG 52 The planet gears of the first reductionstage are plastic, the planet gears ofthe second and third stages are metal.Special versions are available with awelded shaft.
PLG 52 H Low NoiseThe planet gears of the first reductionstage are plastic helical spur gears forespecially quiet running. Both plasticand metal versions are possible.Versions with the gear in one piecewith its shaft (marked yellow in thetable) are only available on request.
PLG 60 Low NoiseThe planet gears of the first reductionstage are helical spur gears for espe-cially quiet running. The plastic planetgears run in an aluminum ring gear.
PLG 70 The planet gears of the first reductionstage are plastic; the planet gears ofthe second and third stages are metal.
PLG 52Die Planetenräder der 1. Getriebestufesind aus Kunststoff, die Planetenräderder 2. und 3. Stufe aus Metall.Sonderausführungen mit geschweißterWelle sind erhältlich.
PLG 52 H Low Noise Die Planetenräder der 1. Getriebestufesind aus Kunststoff und schrägver-zahnt für besondere Laufruhe. Bei der2- und 3-stufigen Version sind Kunst-stoff- oder Metallausführungen mög-lich. Ausführungen mit verzahnterWelle (in der Datentabelle gelb gekenn-zeichnet) sind nur auf Anfrage erhält-lich.
PLG 60 Low NoiseDie Planetenräder der 1. und 2. Stufesind schrägverzahnt für besondereLaufruhe. Dabei bewegen sich diePlanetenräder aus Kunststoff in einemHohlrad aus Aluminium.
PLG 70 Die Planetenräder der 1. Getriebestufesind aus Hartgewebe, die Planeten-räder der 2. und 3. Stufe aus Metall.
Planetary Gearboxes PLGPlanetengetriebe PLG
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
PLG 70
4 5.85 7 16 23.2 28 33.64 40.6 49 64 92.8 112 134.56 162.4 195.112 235.48 284.2 343
0.85 0.72 0.61
1 2 3
500 4000 6000
1.7 2.3 3.1
1000/ 650 1000/ 650 1000/ 650
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
PLG 60 Low Noise
3 4 7 10 12 16 21 30 40 49 70
0.9 0.81
1 2
500 2500
0.55 0.78
500/350 500/350
(Ncm)
(kg)
(N)
(Ncm)
(kg)
(N)
PLG
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
PLG 52 H Low Noise
4.5 6.25 8 15 20.25 28.12 36 50 64 91.12 126,.56 162 225 288 400 512
0.9 0.81 0.73
1 2 3
120 800 2400
0.6 0.72 0.88
500/ 350 500/ 350 500/ 350
Reduction ratio/ UntersetzungsverhältnisEfficiency/WirkungsgradNumber of stages/StufenzahlContinuous torque/DauerdrehmomentWeight of gearbox/GetriebegewichtAxial load/radial load/Axiallast/Radiallast
PLG 52.0
4.5 6.25 8 15 20.25 28.12 36 50 64 91.12 126.56 162 225 288 400 512
0.9 0.81 0.73
1 2 3
120 800 2400
0.55 0.72 0.88
500/ 350 500/ 350 500/ 350
(Ncm)
(kg)
(N)
(Ncm)
(kg)
(N)
Standard/Standard On request/auf Anfrage
4140
PLG
PLG 42S/PLG 42K
PLG 52/ PLG 52 H
PLG 60PLG 30
PLG 70PLG 32
Motor
Dimensions of PLGMaßzeichnungen PLG
Dimensions of PLGMaßzeichnungen PLG
Motor
StagesStufenzahl
GR 22G 30.2G 30.1G 30.0GR 42x25GR 42x40GR 53x30/GR 53x30 SIGR 53x58/GR 53x58 SIGR 63x25/GR 63x25 SIGR 63x55/GR 63x55 SIGR 80x40GR 80x80Gearbox without motorGetriebe ohne Motor
1 2 362.8 70.5 78.2
29.3 47 54.7
1 2 3
68 78 88
78 88 98
103 113 123
28 38 48
1 2 3
70 80 90
80 90 100
105 115 125
100 110 120
115 125 135
29 39 49
1 2 3
122 134 146
116.8 128.6 140.4
131.8 143.6 155.4
46.8 56.8 70.4
1 2
151/196 178/223
181/226 208/253
191 218
231 258
56 83
1 2 3
177/222 209/254 241/286
207/252 239/284 271/316
217 249 281
257 289 321
82 114 146
PLG 24 PLG 30 PLG 32 PLG42S/PLG42K PLG 60 PLG 70
Lengths L motor gearbox combination / Länge L Antrieb (mm +/- 2)
4342
PLG 24
Dimension drawings of complete drives (motor and gear) are available at www.dunkermotoren.com (Products -> direct selection)Maßzeichnungen von kompletten Antrieben (Motor-Getriebe-Kombinationen) erhalten Sie auf unsere Homepage: www.dunkermotoren.de (Produkte -> direkte Produktauswahl)
120°
M2, 5 Depth/Tiefe
120°
M3, 5 Depth/Tiefe
10-0.1
16±0.1
17±0.1
M2
M30.2 A
0.2 A
Motor
Ø24±
0.2
20±0.3
L
0.1 A
0.03A
Ø4±0
.005
1
2
17±0.5
90°
M3, 7
Dept
h/Tie
fe
3.2+0
.1
12±0.1
Motor
L 20±0.5
2
1-0.3
Ø6+0
.005
45°
+0.222 -0.1
0.2 A
0.05 A
A
+0.4
Ø30
-0.3
45°
M3+14 -0.5 Depth/Tiefe
20-0.003
26±0.1 0.2 A
Motor
L
0.05 A0.03
ø 32
20±0.6
0.7+0.3
ø6+0
.008A
3
0.2 A0.2 A
0.05 A0.03
M4M3
0 25 -0.052
32±0.15
36±0.15
L
0.8+0.4
21-0.5
+0.00
7
8
+0.00
1
A
2
15±3
Ø42
M5
7.5 Dept
h/Tiefe
40±0.10.2 A
0.05 A
0.03
L
Ø52
AC
A
B
Scheibenfeder/Woodruff key 4 x 6.5
DIN 6888 Series A12
3
25±1
0
Ø32
-0.03
9
+0.00
8
Ø1
2 +0
.003
Nom
Motor
Motor
L
L
0.06 A
0.03
0.06 A
0.03
0.2 A52±0.1
40h7
M5
Ø60-0
.5
5 A
32±0.8
Ø15h
5
Passfeder/Parallel key 5 x 5 x 20 DIN 6885
0.1
0.25
A
A
A
50±0.011
65±0.1
Ø75-0.5
4xM6
M617
Depth/T
iefe
90°±1°
45°±1°
Ø70±
0.3
Passfeder/Parallel key 6 x 6 x 28 DIN 6885
5
49±1
17.540
18+2
Ø19h
7
6
M6
Scheibenfeder/Woodruff key 2 x 3.76888 Series A
1 2 3
120 135.5 150.5
135 150.5 165.5
145/197.5 160.5/213 175.5/228
175/227.5 190.5/243 205.5/258
145/190 160.5/205.5 175.5/220.5
175/220 190.5/235.5 205.5/250.5
50 65.5 80.5
PLG 52/ PLG 52 H
Motor
1514
Gear motors GetriebemotorenSeries/Baureihe PLG
A.C.-/Three-phase motors with Planetary gearWechselstrom-/Drehstrommotoren mit Planetengetriebe
Planetary gear Planetengetriebe PLG 701-stage up to 5 Nm (up to 10 Nm at short time service)
2-stage up to 40 Nm (up to 60 Nm at short time service)
3-stage up to 60 Nm (up to 100 Nm at short time service)
1stufig bis 500 Ncm (kurzzeitig bis 10 Nm)
2stufig bis 4000 Ncm (kurzzeitig bis 60 Nm)
3stufig bis 6000 Ncm (kurzzeitig bis 100 Nm)
Ratio Efficiency Number ofUntersetzungs- Wirkungs- stagesverhältnis grad Stufenzahl
4 : 1 0.85 1
5.8 : 1 0.85 1
7 : 1 0.85 1
16 : 1 0.72 2
23.2 : 1 0.72 2
28 : 1 0.72 2
33.64 : 1 0.72 2
40.6 : 1 0.72 2
49 : 1 0.72 2
64 : 1 0.61 3
92.8 : 1 0.61 3
112 : 1 0.61 3
134.56 : 1 0.61 3
162.4 : 1 0.61 3
195.112 : 1 0.61 3
235.48 : 1 0.61 3
284.2 : 1 0.61 3
343 : 1 0.61 3
Shaft load capacity Wellenbelastbarkeit PLG 70
Axial load Axiallast max. 1000 N
Radial load Radiallast max. 600 N(wirksam 25 mm ab Anschraubebene)
Gear motors GetriebemotorenSeries/Baureihe PLG
A.C.-/Three-phase motors with Planetary gear Wechselstrom-/Drehstrommotoren mit Planetengetriebe
Allgemeine HinweisePlanetengetriebe erlauben das Über-
tragen hoher Drehmomente bei kleinstemBauvolumen.
Komplett aus hochwertigem Stahlgefertigt und mit einer Haftfettschmierungversehen, eignen sich diese Getriebe fürdie industrielle Anwendung.
Das Hohlrad stellt gleichzeitig das Ge-triebegehäuse dar.
Selbstzentrierende Planetenträger ga-rantieren eine symmetrische Kraftvertei-lung.
Die zweifach kugelgelagerte Getrie-beausgangswelle nimmt hohe radialeBelastungen auf.
Gear unit types Getriebeausführungen
Planetary gear Planetengetriebe PLG 52.01-stage for continuous torques up to 120 Ncm2-stage for continuous torques up to 800 Ncm3-stage for continuous torques up to 2400 Ncm
1stufig für Dauerdrehmomente bis 120 Ncm2stufig für Dauerdrehmomente bis 800 Ncm3stufig für Dauerdrehmomente bis 2400 Ncm
Ratio Efficiency Number ofUntersetzungs- Wirkungs- stagesverhältnis grad Stufenzahl
4.5 : 1 0.90 1
6.25 : 1 0.90 1
8 : 1 0.90 1
15 : 1 0.81 2
20.25 : 1 0.81 2
28.12 : 1 0.81 2
36 : 1 0.81 2
50 : 1 0.81 2
64 : 1 0.81 2
91.12 : 1 0.73 3
126.56 : 1 0.73 3
162 : 1 0.73 3
225 : 1 0.73 3
288 : 1 0.73 3
400 : 1 0.73 3
512 : 1 0.73 3
Shaft load capacity Wellenbelastbarkeit PLG 52.0
Axial load Axiallast 500 N(with axially protected design)(bei axial gesicherter Ausführung)
Radial load Radiallast 350 N(applied in center of woodruff key)(bei Mitte Scheibenfeder)
Planetary gear Planetengetriebe PLG 32.01-stage for continuous torques up to 30 Ncm2-stage for continuous torques up to 150 Ncm3-stage for continuous torques up to 400 Ncm
1stufig für Dauerdrehmomente bis 30 Ncm2stufig für Dauerdrehmomente bis 150 Ncm3stufig für Dauerdrehmomente bis 400 Ncm
Ratio Efficiency Number ofUntersetzungs- Wirkungs- stagesverhältnis grad Stufenzahl
4.5 : 1 0.90 1
6.25 : 1 0.90 1
8 : 1 0.90 1
20.25 : 1 0.81 2
36 : 1 0.81 2
50 : 1 0.81 2
91.12 : 1 0.73 3
162 : 1 0.73 3
288 : 1 0.73 3
400 : 1 0.73 3
512 : 1 0.73 3
Shaft load capacity Wellenbelastbarkeit PLG 32.0
Axial load Axiallast 30 N
Radial load Radiallast 100 N(applied in center of standard gear shaft) (mittig Getriebewelle)
* Please notice: toothed motor shafts require a minimum order quantity and the delivery time will be longer.
* Motorwelle verzahnt, längere Lieferzeiten berücksichtigen, als Kleinstückzahl nicht lieferbar.
Planetary gear Planetengetriebe PLG 52H1-stage up to 120 Ncm2-stage up to 800 Ncm3-stage up to 2400 Ncm
1stufig bis 120 Ncm2stufig bis 800 Ncm3stufig bis 2400 Ncm
Ratio Efficiency Number ofUntersetzungs- Wirkungs- stagesverhältnis grad Stufenzahl
4.5 : 1 0.90 1
6.25 : 1 0.90 1
8* : 1 0.90 1
15 : 1 0.81 2
20.25 : 1 0.81 2
28.12 : 1 0.81 2
36* : 1 0.81 2
50* : 1 0.81 2
64* : 1 0.81 2
91.12 : 1 0.73 3
126.56 : 1 0.73 3
162* : 1 0.73 3
225* : 1 0.73 3
288* : 1 0.73 3
400* : 1 0.73 3
512* : 1 0.73 3
Shaft load capacity Wellenbelastbarkeit PLG 52 H
Axial load Axiallast 500 N(with axially protected design)(bei axial gesicherter Ausführung)
Radial load Radiallast 350 N(applied in center of woodruff key)(bei Mitte Scheibenfeder)
General pointsPlanetary gear units make it possible
to transmit high torques in a small volume.Made completely of high-grade steel
and lubricated with a lubricant with highadhesion, these gear units are well suitedfor industrial applications.
The outer ring gear also forms thegear unit casing. Symmetrical force dis-tribution is ensured by the self-cen-tringplanet wheel carrier.
The output shaft with its double ballbearings can handle high radial loads.
stock program at: /aktuelles Lagerprogramm unter:
www.dunkermotoren.de/lagerliste
Mass l2 und l3 siehe Motormaßbild.
Gear motors GetriebemotorenSeries/Baureihe PLG
A.C.-/Three-phase motors with Planetary gear Wechselstrom-/Drehstrommotoren mit Planetengetriebe
Motor KD/DR 62.0 / PLG 70MOTORTYPE DIM. MASS
l1 ± 1 l2 ± 1 l3 ± 1
62.0x40 133 108.5 31.5
62.0x60 149 124.5 47.5
62.0x80 169 144.5 67.5
62.0x40 ASTO 176.5 152 31.5
62.0x60 ASTO 192.5 168 47.5
62.0x80 ASTO 212.5 188 67.5
GEAR UNIT STAGES DIM. l4GETRIEBESTUFEN MASS l41stage 1stufig 82 ± 8
2stage 2stufig 114 ± 8
3stage 3stufig 146 ± 8
See motor dimension drawing for dim. l2 and l3 Mass l2 und l3 siehe Motormaßbild.
Motor KD/DR 52.0/PLG 52.0/HMOTORTYPES DIM. MASS l1
52.0x40 130 ± 1
52.0x60 146 ± 1
52.0x40 ASTO 166.5
52.0x60 ASTO 182.5
GEAR UNIT STAGES DIM. l4GETRIEBESTUFEN MASS l4
1stage 1stufig 50 ± 1
2stage 2stufig 65.5 ± 1
3stage 3stufig 80.5 ± 1
Motor KD/DR 62.0/PLG 52.0/H
MOTORTYPES DIM. MASS l1
62.0x40 133 ± 1
62.0x60 149 ± 1
62.0x80 169 ± 1
62.0x40 ASTO 176.5 ± 1
62.0x60 ASTO 192.5 ± 1
62.0x80 ASTO 212.5 ± 1
GEAR UNIT STAGES DIM. l4GETRIEBESTUFEN MASS l4
1stage 1stufig 50 ± 1
2stage 2stufig 65.5 ± 1
3stage 3stufig 80.5 ± 1
Gear motors GetriebemotorenSeries/Baureihe PLG
A.C.-/Three-phase motors with Planetary gearWechselstrom-/Drehstrommotoren mit Planetengetriebe
Motor KD/DR 52.1/PLG52.0/H
MOTORTYPES DIM. MASS a
52.1x30 106.5
52.1x60 136.5
52.1x30 ASTO 136
52.1x60 ASTO 166
GEAR UNIT STAGES DIM. IGETRIEBESTUFEN MASS l
1stage 1stufig 50
2stage 2stufig 65.5
3stage 3stufig 80.5
Motor KD 42x30/PLG 32.0
GEAR UNIT STAGES DIM. IGETRIEBESTUFEN MASS l
1stage 1stufig 31
2stage 2stufig 40
3stage 3stufig 50
1716
with brake
depth
depth
7.5 depth
7.5 depth
17 de
pthdepth
Motor KD/DR62.1/PLG52.0/H
MOTORTYPES DIM. MASS a
62.1x60 146.5
62.1x60 ASTO 176
GEAR UNIT STAGES DIM. IGETRIEBESTUFEN MASS l
1stage 1stufig 50
2stage 2stufig 65.5
3stage 3stufig 80.5
stock program at: /aktuelles Lagerprogramm unter:
www.dunkermotoren.de/lagerliste