Page 1 of 6

PHOTO DETAILS FOR HEAT RECOVERY AREA INSPECTIONLocation: BOILER HOUSE #2Inspection Date: 19 JUNE 2014

GAS INJECTOR CANNOT BE EJECTED. THE MEMBRANE IS BLOCKING THE PATH.

Page 2 of 6

INSTALLED EMERGENCY/SAFETY VALVE HAS NOT ENOUGH ACCESS FOR MAINTENANCE.

Page 3 of 6

GAS INJECTOR SHOULD HAVE CLEARANCE FROM THE MEMBRANE.

Page 4 of 6

INSTALLED FLANGE IS SLANTED. INSTRUMENT TO BE INSTALLED WILL BE SLANTED. THIS IS COMMON

ADDITIONAL SUPPORT NEEDED TO HOLD THE VALVES.

Page 5 of 6

INSTALLATION OF CONTROL VALVES MUST BE RECTIFIED. INDICATOR MUST BE VISIBLE TO THE USER. THIS IS COMMON TO ALL CONTROL VALVES IN BOILER HOUSE.

Page 6 of 6