PITTSBURGH, PA YARD LOCATIONS / CHECKOUT€¦ · 19/8/2019 · YARD #6 - PITTSBURGH, PA ADDRESS: American Made Systems 2600 Neville Rd, 15225 CHECKOUT: Thru August 21st (8-5) Mon-Fri

PITTSBURGH, PATUESDAY/WEDNESDAY

AUGUST 6th & 7th, 20199:00AM (ET) Each Day

AUCTION SALE SITEDouble Tree Hotel - Airport 8204 University Blvd, 15108

412-329-1400

NOTE: Please read all “Bidding Terms & Conditions” of this auction, located in the back of this catalog and become familiar with them before bidding on any lots.

UPCOMING AUCTIONS

ODESSA, TEXAS SEPTEMBER 25th, 2019Drilling, Well Service, Trucks/Trailers

DUNCAN, OKLAHOMA SEPTEMBER 11th, 2019Drill Bits

OKLAHOMA CITY, OK NOVEMBER 6th & 7th, 2019Drilling, Well Service, Trucks/Trailers

YARD #1 - CAMBRIDGE, OH

ADDRESS: I.C.D. 6440 John Glenn Hwy, 43725 CHECKOUT: Thru August 28th (8-5) Mon-Fri - NO WEEKENDSNOTE: 8,000# Forklift Available for Loadout CONTACT: Jerry Bania @ (412) 925-2473

Inspect Equipment Prior to Bidding

YARD LOCATIONS / CHECKOUT

YARD #2 - CAMBRIDGE, OH

ADDRESS: Priority Automotive, 3645 John Glenn Hwy, 43725 CHECKOUT: Thru August 28th (8-5) Mon-Fri - NO WEEKENDS / BY APPOINTMENT ONLYNOTE: 8,000# Forklift Available for Loadout CONTACT: Jerry Bania @ (412) 925-2473

YARD #3 - DEXTER CITY, OH

ADDRESS: Warren Trucking, 305 Smithson St, 45727 CHECKOUT: Thru August 21st (8-5) Mon-Fri - NO WEEKENDS NOTE: Loadout For Hire Available CONTACTS: Randy or Danny Warren @ (740) 584-9710 or (740) 581-1785

YARD #4 - CANTON, OH

ADDRESS: Mid-East Trucking, 831 Nassau St East, 44730 CHECKOUT: Thru August 21st (8-5) Mon-Fri NOTE: Loadout For Hire Available CONTACTS: John Bachman or Kyle Norman @ (330) 488-0398 or (330) 705-6585

YARD #5 - SISSONVILLE, WV

ADDRESS: Viking Well Service, 8113 Sissonville Dr, 25320 CHECKOUT: Thru August 21st (8-5) Mon-Fri - NO WEEKENDSNOTE: 6,000# Forklift Available for Loadout CONTACT: Shane Pinkerton @ (304) 545-7218

YARD #6 - PITTSBURGH, PA

ADDRESS: American Made Systems 2600 Neville Rd, 15225 CHECKOUT: Thru August 21st (8-5) Mon-Fri - NO WEEKENDSNOTE: NO LOADOUT AVAILABLE CONTACT: American Made Systems @ (412) 771-3300

YARD #7 - MERCER, PA

ADDRESS: 748 Wilson Ave, 16137 CHECKOUT: Thru August 21st (8-5) Mon-Fri - BY APPOINTMENT ONLYNOTE: Loadout For Hire Available CONTACT: Connie Carter @ (724) 662-5550

YARD #8 - MT. MORRIS, PA

ADDRESS: Yost Drilling, 160 Bald Hill Rd, 15349 CHECKOUT: Thru August 21st (8-5) Mon-Fri - BY APPOINTMENT ONLYNOTE: Loadout For Hire Available CONTACT: Connie Carter @ (724) 662-5550

YARD #9 - NORMANTOWN, WV

ADDRESS: Venture Contracting, 4102 Sandridge Rd, 25267 CHECKOUT: Thru August 21st (8-5) Mon-Fri - BY APPOINTMENT ONLYNOTE: Loadout For Hire Available CONTACT: Greg Shotgun Laughlin @ (304) 655-7576 or (304) 337-5099

YARD #10 - BRIDGEPORT, WV

ADDRESS: Lightning Energy Services, 104 Heliport Loop Rd, 26330 CHECKOUT: Thru August 21st (8-5) Mon-Fri - NO WEEKENDSNOTE: Loadout For Hire Available CONTACT: Chris Swiger @ (304) 680-5409

This Catalog is Merely A Guide

YARD #11 - MORGANTOWN, WV

ADDRESS: Gum Springs Corp, 134 Distributor Dr, 26501 CHECKOUT: Thru August 21st (8-5) Mon-Fri - NO WEEKENDSNOTE: Loadout For Hire Available CONTACT: Scott Swiger @ (304) 669-6661 or (304) 225-0978

YARD #12 - BRUCETON MILLS, WV

ADDRESS: 700 Old Route 73, 26525 CHECKOUT: Thru August 21st (8-5) Mon-Fri - BY APPOINTMENT ONLY CONTACT: Scott Swiger @ (304) 669-6661 or (304) 225-0978

YARD #13 - BRUCETON MILLS, WV

ADDRESS: Gum Springs Corp, 13267 N. Preston Hwy, 26525 CHECKOUT: Thru August 21st (8-5) Mon-Fri - BY APPOINTMENT ONLYNOTE: Loadout For Hire Available CONTACT: Scott Swiger @ (304) 669-6661 or (304) 225-0978

YARD #14 - MUNCY, PA

ADDRESS: Carrs Trailers & Supplies, 1825 John Brady Dr, 17756 CHECKOUT: Thru August 28th (8-5) Mon-Fri - BY APPOINTMENT ONLYNOTE: Loadout For Hire By Appointment CONTACT: Gerry & Val Schmidt @ (682) 472-2487

YARD #15 - JERSEY SHORE, PA

ADDRESS: Henry Street Partnership, 180 Henry St, 17740 CHECKOUT: Thru August 28th (7-3) Mon-Fri - BY APPOINTMENT ONLYNOTE: Loadout For Hire By Appointment CONTACT: Chuck Green @ (325) 203-7473

No Warranties Written, Stated or Implied

Warren Trucking/Crane Co. @ 740-584-9710 or 740-581-1785

Mid-East Trucking Co. @ 330-488-0398 or 330-705-6585

Yost Trucking @ 724-998-2761

For Loadout on Yards # 14 & 15 Call: West Penn Heavy Haul @ 570-772-7573

TRUCKING COMPANIES

YARD #16 - BROOKWOOD, AL

ADDRESS: Capstone Oilfield, 15574 Hwy 216, 35444 CHECKOUT: Thru August 21st (8-5) Mon-Fri - NO WEEKENDSNOTE: Loadout For Hire Available CONTACT: Jerry Shelton @ (205) 393-2884

YARD #17 - TUSCALOOSA, AL

ADDRESS: Capstone Oilfield, 5801 21st St, 35401 CHECKOUT: Thru August 21st (8-5) Mon-Fri - NO WEEKENDS / BY APPOINTMENT ONLYNOTE: Loadout For Hire Available CONTACT: Jerry Shelton @ (205) 393-2884

YARD #18 - NEWCOMERSTOWN, OH

ADDRESS: 401 Enterprise Dr, 43832 CHECKOUT: Thru August 21st (8-5) Mon-Fri - NO WEEKENDS CONTACT: Jason Hatfield @ (330) 925-1000

YARD #19 - ODESSA, TX

ADDRESS: 11611 County Rd 128 West, 79765 CHECKOUT: Thru August 21st (8-5) Mon-Fri - NO WEEKENDS NOTE: NO LOADOUT AVAILABLE CONTACTS: Josh Casteel @ (432) 631-3574 or Mitchell Long @ (432) 661-4414

Inspect Equipment Prior to Bidding

TABLE OF CONTENTS

Trailer / Trucks

SANDCASTLE Trailers

Construction Equipment

Rig #61 - OILWORKS 1000






Rig #60 - SKYTOP BREWSTER NE-75

Forum Catwalk & Skidding System

Well Control Equipment

Mud Pumps / Tanks

Generators / Engines

Drill Pipe & Collars

Pipe Racks & Tubs

Traveling / Handling Equipment

Rig Houses

Drilling Components

Lot 1

Lot 5

Lot 7

Lot 27

Lot 68

Lot 106

Lot 145

Lot 180

Lot 218

Lot 258

Lot 296

Lot 306

Lot 360

Lot 372

Lot 390

Lot 629

Lot 680

Lot 743

Lot 767

A 3% Administrative Fee Will Be Charged On All Purchases, 6% For Online Bidders

DAY 1

Shop Equipment

Swab Rigs

Well Service Pumps / Swivels

Auger Rigs

Drilling Rigs

Top Drives / Components

Air Boosters / Compressors

Soap & Mud Pumps

Well Control Equipment

Drill Pipe & Trailers

Rig Houses / Tanks

Drilling Components

Lot 800

Lot 824

Lot 826

Lot 831

Lot 833

Lot 931

Lot 945

Lot 1030

Lot 1035

Lot 1049

Lot 1060

Lot 1069

DAY 2

SUPERIOR ENERGY AUCTIONEERS, LPPITTSBURGH, PA

AUGUST 06 & 07, 2019Loc Lot# Unit# Price Buyer

BEGIN DAY ONETRAILER/TRUCKS

_______ _______ _______5 F 1 (x) 2005 HOLDEN CZ T/A Utility

Trailer, VIN-12HZD30215S108441, 28,000#GVWA, 19.10"L, 5'4"L Dovetail,5'L Folding Ramps, Pintle Hitch,16" Tires

_______ _______ _______5 F 2 (x) 2001 MACK CH-613 T/A

Winch Truck, VIN-1M2AA13Y6PW022029, 240" WBp/b MACK E7-350 350HP DieselEng, EATON 9-Spd Trans, PTO,Air Ride Susp, 18'L OilfieldFlatbed w/BRADEN 35 HydWinch, Rolling Tailboard,11R24.5 Tires (579,480 MeteredMiles)

_______ _______ _______17 G 3 (17-15) 1995 INTERNATIONAL

2674 6x4 T/A Winch Truck, VIN-1HSGLAET5SH210040, 202" WBp/b CUMMINS N14 Diesel Eng,EATON 18-Spd Trans,DICKIRSON Rig-Up, TULSA45,000# Winch, Sliding 5thWheel, Frame Width Tail Roller,11R22.5 Tires (421,000 MeteredMiles)(NOTE: BILL OF SALE ONLY)

1



_______ _______ _______5 F 4 (x) 2007 PETERBILT 377 T/A

w/Steerable Drop Axle VacuumTruck, VIN-1XPGDU9X07N686532, 254" WBp/b CAT C-15 Diesel Eng,EATON 8-Spd LL Trans, Air RideSusp, 110-Bbl Tank, JUROPVacuum Pump, 425/65R22.5Front & 11R22.5 Rear Tires,Alum Budds (650,231 MeteredMiles) (Note: NEW Radiator &Motor Mounts)

_______ _______ _______11 C 4A (x) 2009 PETERBILT T/A Truck

Tractor w/Sleeper, VIN-1XPWDB0X09N770818, 247" WBp/b CAT C-15 Twin Turbo DieselEngs, EATON 18-Spd Trans, WetKit, Air Ride Susp, Sliding 5thWheel, 11R24.5 Tires (876,288Miles)

2



SANDCASTLE TRAILERS

_______ _______ _______12 D 5 (12-1) 2012 SANDCASTLE PS-

2500 2500 Cu Ft Bulk StorageBin, Solar Panel Powered, HydRaised to Vertical Position, Mtdon 2012 MERTZ T/A Trailer, VIN-1M91H482XCA211714, 11R22.5Tires(NOTE: BILL OF SALE ONLY)

_______ _______ _______12 D 6 (12-2) 2012 SANDCASTLE PS-

2500 2500 Cu Ft Bulk StorageBin, Solar Panel Powered, HydRaised to Vertical Position, Mtdon 2012 MERTZ T/A Trailer, VIN-1M91H4829CA211767, 11R22.5Tires(NOTE: BILL OF SALE ONLY)

3



CONSTRUCTION

_______ _______ _______16 G 7 (16-7) INGERSOLL RAND

1170/350 Air Compressor p/bCAT C-15 540HP Diesel Eng, S/N-JRE00263, w/Elec Starter,Radiator, Gauges, Panel, OilCooler, Enclosed, Mtd on T/APintle Hitch Trailer, 17.5 Tires(2633 Metered Hours)(NOTE: BILL OF SALE ONLY)

_______ _______ _______16 G 8 (16-8) SULLAIR 1150/350 Air

Compressor p/b CAT C-15540HP Diesel Eng, S/N-BEM01373, w/Elec Starter,Radiator, Gauge Panel, OilCooler, Enclosed, Mtd on TriaxlePintle Hitch Trailer, 16.5 Tires(9041 Metered Hours)(NOTE: BILL OF SALE ONLY)

_______ _______ _______16 G 9 (16-9) 2006 INGERSOLL RAND

1170/350 Air Compressor p/bCAT C-15 540HP Diesel Eng, S/N-JRE01559, w/Elec Starter,Radiator, Gauge Panel, OilCooler, Enclosed, Mtd on T/APintle Hitch Trailer, 17.5 Tires(4181 Metered Hours)(NOTE: BILL OF SALE ONLY)

4



_______ _______ _______17 G 10 (17-6) INGERSOLL RAND

900/350 Air Compressor p/b CAT3406 Diesel Eng, S/N-3ER02412,w/Elec Starter, Radiator, OilCooler, Gauge Panel, InEnclosed Box on T/A PintleHitch Trailer (10,518 MeteredHours)(NOTE: BILL OF SALE ONLY)

_______ _______ _______9 B 11 (x) (9-5) 2008 CAT XQ100

Portable Gen Set w/CAT 100KWAC Gen p/b CAT C4.4 Diesel Engw/Elec Starter, Radiator, Elec &Gauge Panel, Enclosed, Mtd onT/A Pintle Hitch Trailer, VIN-16MPF11218D053208, 15" Tires(15,164 Metered Hours)

_______ _______ _______14 A 12 (14-79) 2009 CAT TL1255

Telehandler, S/N-TBN00605(Hours N/A), p/b CAT C4.4 AcertEng, Front Outriggers & Forks,Hyd Hook Up on Boom, 3'W x3'8"H x 10'L Work Basket,Enclosed Cab w/A/C & Heater,17.5-25 Tires

_______ _______ _______14 A 13 (14-80) CAT TL1255 Telehandler,

S/N-N/A (Hours N/A), p/b CATC4.4 Acert Eng, Front Outriggers& Forks, Hyd Hook Up on Boom,Enclosed Cab w/A/C & Heater,17.5-25 Tires

5



_______ _______ _______14 A 14 (14-81) 2010 CAT TL1255

Telehandler, S/N-TBN00678(Hours N/A), p/b CAT C4.4 AcertEng, Front Outriggers, No Forks,Hyd Hook Up on Boom,Enclosed Cab w/A/C & Heater,17.5-25 Tires

_______ _______ _______14 A 15 (14-82) 2009 CAT TL1255

Telehandler, S/N-TBN00545(Hours N/A), p/b CAT C4.4 AcertEng, Front Outriggers & Forks,Enclosed Cab w/A/C & Heater,17.5-25 Tires

_______ _______ _______14 A 16 (14-83) CAT Stinger Attachment

f/CAT TL1255 & 7'10"W QuickConnect Bucket

_______ _______ _______7 A 17 (7-4) CAT TL1255 Telehandler,

S/N-TBN00682, p/b CAT C4.4Acert Eng, Front Hyd Outriggers,Hyd Quick Connect on Boom,No Boom Attachment, EnclosedCab w/A/C & Heater, 17.5-25Tires

_______ _______ _______11 C 17A KOMATSU PW170ES-6KA

Rubber Tired 4x4 Excavator, S/N-K32085, w/Hyd Angle Tilt, 8'6"Stick, (4) Outriggers, EnclosedCab, 24"W Bucket

6



_______ _______ _______1 A 18 TAYLOR THD160 16,000#

Forklift, S/N-SC823072, p/bCUMMINS 4-Cyl Diesel Engw/Enclosed Cab, 8'L Forksw/Side Shift

_______ _______ _______1 A 19 CAT IT28G Wheel Loader, S/N-

CATIT28GCDBT01104,w/Enclosed Cab, ClimateControl, 5'L Forks & Pipe Clampw/Hyd Quick Connect, 20.5R25Tires

_______ _______ _______1 A 20 (2) 2007 CAT TL1255

Telehandlers, S/Ns-TBN00168 &TBN00133, Ea w/(2) 4'L Forks(Both Inoperable & (1) Wrecked)

_______ _______ _______1 A 21 (3) JLG Telehandler Personnel

Work Platforms, 2-Man & Tool,1000# Max (UNUSED)





_______ _______ _______1 A 24 (4) 17.5x25 Tubeless Telehandler

Tires & Wheels

7



_______ _______ _______1 A 25 (4) 17.5x25 Tubeless Telehandler

Tires & Wheels

_______ _______ _______1 A 26 (2) Forklift Extendable Stingers,

CAT TL1255 Hyd Cyl (UNUSED)

RIG #61(Drilled w/Top Drive)

_______ _______ _______15 A 27 (15-1) Complete Rig Package,

Lots 28 thru 67

_______ _______ _______15 A 28 (15-2) OILWORKS 1000 S/D

Drwwks, S/N-020, LEBUS f/1-1/4" Line, Crown-O-Matic,EATON 236 Disc Clutch Brake,(3) ROTZLER Hyd UtilityWinches, OILWORKS 2-Eng In-Line Compound w/QUINCY 390Air Compressor p/b (2) CAT C-18630HP Diesel Engs, S/Ns-WJH05471 & WJH05472, Eaw/Air Starter, Radiator, Gauges,NATIONAL C-195-100 TorqueConverters, on 15'W x 38'L Skid

8



_______ _______ _______15 A 29 (15-3) OILWORKS 137'H

600,000# SHL Cantilever Mast,Crown Block w/(5) 42" & (1) 54"Sheaves, Tong Weights, 4"Standpipe, Mast Stand, RackingBoard, (2) 8'W x 36'L Rig Mats,(3) 17"H x 28'L Pipe Racks, LEDLights, FULL CIRCLE 20'H x24'W x 54'L Box-On-BoxSubstructure w/Rotary Beams,(2) Air Chain Hoists,INGERSOLL RAND KU5 AirHoist, WCR Brake, WaterCooling Unit w/Radiator, (2)MCM 3" x 4" Cent Pumps, Ea p/b50HP Elec Motor, NOV HPU p/b40HP Elec Motor, Air VolumeTanks, 12'L Parts Room w/WorkBench, Hammer Wrenches, BOPStud, Misc Skidded

_______ _______ _______15 A 30 (15-5) 2011 TFI F-1600 Triplex

Pump, S/N-201203, w/ForgedSteel Fluid Ends, Quick ChangeCaps, K-20 5000# PulsationDampener, OTECO 3" ShearRelief Valve, Model 7 PressureGauge, Suction Screen, MCM 5"x 6" Charging Pump, Bullwheel,Skidded

9



_______ _______ _______15 A 31 (15-6) 2011 TFI F-1600 Triplex

Pump, S/N-N/A, w/Forged SteelFluid Ends, Quick Change Caps,K-20 5000# Pulsation Dampener,OTECO 3 " Shear Relief Valve,Model 7 Pressure Gauge,Suction Screen, COBRA 5" x 6"Charging Pump, Bullwheel,Skidded

_______ _______ _______15 A 32 (15-4) (2) 2010 CAT SR-4B

455KW AC Gens, Ea p/b CAT C-15 Diesel Engs, S/Ns-PLZ00333& PLZ00542, Ea w/Elec Starter,Radiator, Gauge Panel, SQUARED Elec Station, SQUARE D 112.5Transformer, INGERSOLL RAND2475 Air Compressor, Mtd in9'10"W x 45'L Utility House,Skidded

_______ _______ _______15 A 33 (15-7) Complete BOP Package,

Lots 34 thru 37

_______ _______ _______15 A 34 (15-8) HYDRIL GK-10-1500 11"

5000# Spherical BlowoutPreventer w/Flanged Bottom &Studded Top

_______ _______ _______15 A 35 (15-9) SHAFFER 11" 5000# Dbl

Ram Blowout Preventer w/5"Pipe & Blind Rams, Studded Top& Bottom

10



_______ _______ _______15 A 36 (15-9A) 11" 5000# Drilling Spool

w/(2) 4-1/16" Outlets

_______ _______ _______15 A 37 (15-10) 6'W x 16'L 3-Stump BOP

Transport Skid

_______ _______ _______15 A 38 (15-11) GUANGZHOU DONGSU 5-

Station Closing Unit w/(12) 10-Gal Bottles, Triplex Pump p/b20HP Elec Motor, (2) Air Pumps,Skidded, MYERS C-20 TriplexPump p/b 30HP Elec Motor, 2-Compartment Soap MixingTanks, SPEEDAIRE Elec AirCompressors, 1" Steel FlexHoses, 3/8" Load Chains, WireRope Slings, Breaker Box,Transformer, RUFFNECK & ElecHeat, Lights, All in 8'W x 40'LCrimped Steel Utility House,Skidded

_______ _______ _______15 A 39 (15-12) 5000# Choke Manifold

w/(3) 4-1/16" & (4) 2-1/16"Manual Valves, (2) ManualChokes, 48"Dia x 10'L GasBuster, All on 8'W x 31'L Skid

_______ _______ _______15 A 40 (15-13) 4-1/16" HRC Valve, 4-

1/16" Gate Valve & 2-1/16" Gate& Check Valves

_______ _______ _______15 A 41 (15-14) AMERI-TECH 10'W x 50'L

Rig Manager House w/Office,Living Room, Bed & Bath Areas,Climate Control, Skidded

11



_______ _______ _______15 A 42 (15-15) 8'W x 22'L Top Doghouse

w/4'L Covered Porch, WeightIndicator, Knowledge Box,Bench & Cabinet Storage, A/C &Heater Unit, (4) Lockers, BoltBins, A-1 Sureshot, Drill CollarSafety Clamp, Hand Tools, RigParts, Misc, Skidded

_______ _______ _______15 A 43 (15-16) 8'W x 20'L Crimped Steel

Change House w/(17) Lockers,Fridge, Work Bench, (2) 48" BugBlowers, Skidded


Combo House w/StorageCabinets, Shelves, Work Bench,(16) Lockers, COBRA 1-1/2" x 2"Cent Pump, TFI Pump Parts,Pump Seat Puller, PulsationDampener, Bladders, Band V-Belts, Brake Bands, Ball Valves,Misc, Skidded


Parts House w/StorageCabinets, Shelves, F-1600 FluidModule, Bolt & Hyd Bins, WorkBench w/Vise, Hand Tools, WireRope, (1) 3" & (3) 2" GasPowered Trash Pumps, ChainHoist, Hyd Hoses, BJ 5" CL DrillPipe Elevator, Paint Cabinet,Misc, Skidded (Most PartsUNUSED)

12




Parts House w/Cabinet Storage& Shelves,(3) RUFFNECKHeaters, Various Sizes ofButterfly Valves, Eng Filters,EATON Air Clutch, Wire Rope,Electrical & CAT Eng Parts,Roller Chains, MORSECouplings, Misc, Skidded (MostParts UNUSED)


Change House w/(21) Lockers,Benches, (3) 55-Gal Drums ofHyd Oil & Antifreeze (UNUSED),Skidded

_______ _______ _______15 A 48 (15-21) 8'W x 10'L Mud House

w/Hopper, Exhaust Fan, Sink &Shower, Skidded

_______ _______ _______15 A 49 (15-22) 8'W x 10'L Shower House

w/Shower, Skidded

_______ _______ _______15 A 50 (15-23) 8'H x 8'W x 45'L 500-Bbl

Open Top Water Tank w/6'LCovered Porch, (2) MCM 2" x 3"Cent Pumps, Ea p/b 30HP ElecMotors, Skidded

_______ _______ _______15 A 51 (15-24) 5'H x 7'5"W x 15'L 90-Bbl

Open Top Mixing Tank w/HALCO2" x 3" Cent Pump p/b 20HP ElecMotor, Top-Mtd Walkway,Skidded

13



_______ _______ _______15 A 52 (15-25) 8'Dia x 30'L 11,000-Gal

Fuel Tank w/(2) Elec TransferPumps, 10'L Parts Room w/5-Compartment Lubester, Shelvesw/Eng Filters, Skidded

_______ _______ _______15 A 53 (15-26) 6'H x 11'6"W x 40'L 470-

Bbl Crimped Steel Suction Tankw/10'L Covered Porch, (2)MISSION 5" x 6" Cent Pumps, Eap/b 60HP Elec Motors, (3)Compartments, InternalPlumbing, Top Walkway &Safety Rails, Skidded

_______ _______ _______15 A 54 (15-27) 6'H x 11'6"W x 50'L 580-

Bbl Crimped Steel Shaker Tankw/MAX200 Agitator p/b 10HPElec Motor, (2) MI SWACOMongoose Shale Shakers, (3)Compartments, InternalPlumbing, Top Walkway &Safety Rails, Skidded

_______ _______ _______15 A 55 (15-28) ARCTIC T-250 250-Ton 5-

Sheave Block w/Becket, on 6'H x8'W x 12'L Stand

_______ _______ _______15 A 56 (15-29) SKYTOP BREWSTER

RSH22 22" Rotary Table w/SplitMaster Bushing

_______ _______ _______15 A 57 (15-30) MRO Pressure Washer

Unit w/Tank, Triplex Pump p/bElec Motor, Skidded

14



_______ _______ _______15 A 58 (15-31) 7'6"W x 29"H x 34'L Pipe

Tub w/Substructure, SpreaderBeams & Misc

_______ _______ _______15 A 59 (15-32) 7'6"W x 28'H x 34'L Pipe

Tub w/4", 3" & 2" High Pressure& Suction Hoses, SubstructureFloor Plates & Misc

_______ _______ _______15 A 60 (15-33) 7'6"W x 28"H x 34'L Pipe

Tub w/(2) Stairs, Oil Totes,Flowline Stands, Ladder, MiscPipe

_______ _______ _______15 A 61 (15-34) 7'6"W x 28"H x 34'L Pipe

Tub w/Raising Line Sheave, DrillPipe Slips, 5" CL Elevator, (2)WASHINGTON 3000/5000# AirBowls, (2) Elevator Links, (2)Type B Rotary Tongs, (2) 11"5000# Spacer Spools, Cable &Misc

_______ _______ _______15 A 62 (15-35) 6'H x 8'W x 30'L Junk

Box w/FIVE STAR Elec/HydWireline Units, BLOHM & VOSS3570 Pipe Spinner, (2)Windwalls, Wind Tarps, (12)Changeover Subs, Lubricants,Safety Rails & Misc

_______ _______ _______15 A 63 (15-36) (17) 8'W x Various

Length Steel Rig Mats w/WoodCenters, (3) Stairs, (2) 3"ID SteelFlex Hoses

15



_______ _______ _______15 A 64 (15-37) 7'6"W x 38'L Drill Collar

Transport Skid

_______ _______ _______15 A 65 (15-38) (8) 11'5"W x 10'L Steel

Pit Roofs, on 8'W x 20'L Skidw/Junk Basket

_______ _______ _______15 A 66 (15-39) (2) MISSION 1-1/2" x 2"

Cent Pumps, Ea p/b 3HP ElecMotor, on 4'W x 6'L Skid & Bridle Cable, 8'W x 10'L Rig Mat,(2) 3-1/2"ID Rotary Hoses

_______ _______ _______15 A 67 (15-40) (2) Oil Totes, (5) Stairs,

(6) Flowline Stands, (2) UprightPipe Stands, (2) Lift Subs, (4)Changeover Subs, CrossoverSafety Mats, Anchor Weights &Misc

Rig Package Piecemeal Total:$_________________

16





Lots 69 thru 105

_______ _______ _______2 A 69 (2-53) OILWORKS 1000 S/D

Drwwks, S/N-026, LEBUS f/1-1/4" Line, Crown-O-Matic,EATON 236 Disc Clutch Brake,(3) ROTZLER Hyd UtilityWinches, OILWORKS 2-Eng In-Line Compound w/QUINCY 390Air Compressor p/b (2) CAT C-18630HP Diesel Engs, S/Ns-WJH09438 & WJH09446, Eaw/Air Starter, Radiator, Gauges,NOV C-195-100 TorqueConverters, Skidded

17



_______ _______ _______2 A 70 (2-54) FULL CIRCLE 142'H

550,000# SHL Cantilever Mast,Crown Block w/(5) 42" & (1) 54"Sheaves, Standpipe, LED Lights,Racking Board, DeadlineAnchor, (3) 19"H x 28'LTriangular Pipe Racks, (6) 8'W x30'L Rig Mats, (2) THERN ElecUtility Winches, FULL CIRCLE18'H x 51'L Box-On-BoxSubstructure w/WCR BrakeCooling System, (2) MISSION 3"x 4" Cent Pumps p/b 40HP ElecMotors, 1" Steel Flex BOP Lines,Mud Line, Air Volume Tanks,Swingout DH Supports, Stairs,Skidded

_______ _______ _______2 A 71 (2-55) 2010 TFI F-1600 Triplex

Pump, S/N-201005, w/ForgedSteel Fluid Ends & QuickChange Caps, K-20 5000#Pulsation Dampener, OTECO 3"Shear Relief Valve, Type DPressure Gauge, SuctionScreen, MISSION 5" x 6"Charging Pump, Bullwheel, onCovered Skid

18



_______ _______ _______2 A 72 (2-56) 2010 TFI F-1600 Triplex

Pump, S/N-201006, w/ForgedSteel Fluid Ends & QuickChange Caps, K-20 5000#Pulsation Dampener, OTECO 3"Shear Relief Valve, Type DPressure Gauge, SuctionScreen, MISSION 5" x 6"Charging Pump, Bullwheel, onCovered Skid

_______ _______ _______2 A 73 (2-57) (2) CAT SR-4B 455KW AC

Gens, Ea p/b CAT C-15 DieselEngs, S/Ns-P3Z00503 &P3Z00504, Ea w/Elec Starter,Radiator, Gauge Panel, Skidded,SQUARE D Elec Station,SQUARE D 112.5 Transformer,Mtd in 10'W x 40'L Utility House,Skidded (24,517 & N/A MeteredHours)

_______ _______ _______2 A 73A BOP Package, Lots 74 thru 76

_______ _______ _______1 A 74 13-5/8" 5000# Spherical Blowout

Preventer w/NEW Element,Flanged Bottom & Studded Top

_______ _______ _______1 A 75 13-5/8" 5000# Dbl Ram Blowout

Preventer w/5" Pipe & BlindRams, Studded Top & Bottom

19



_______ _______ _______1 A 76 13-5/8" 22"H 5000# Drilling

Spool w/(2) 3-1/8" Outlets,CAMERON 3-1/8" HCR Valve, (3)3-1/8" Manual Valves & CheckValve

_______ _______ _______2 A 77 (2-66) 5000# Choke Manifold

w/(5) 4-1/16" & (6) 2-1/16"Manual Valves, (1) ManualChoke, 48"dia x 10'L Gas Buster,Skidded

_______ _______ _______2 A 78 (2-58) 8'W x 25'6"L Top

Doghouse w/4'L Covered Porch,Weight Indicator, KnowledgeBox, Benches, Cabinets, (3)Lockers, (2) Mud Buckets,Floorhand Operator Station,Hand Tools, A-1 Sureshot, BoltBins, Rig Parts & Misc, Skidded

_______ _______ _______2 A 79 (2-59) 8'W x 35'L Change House

w/Benches, Cabinets, WorkBench, (23) Lockers, HPComputer, Tables & Chairs,Ladder, Fridge & Misc, Skidded

20



_______ _______ _______2 A 80 (2-60) 5-Station Closing Unit

w/(12) 10-Gal Bottles, TriplexPump p/b 20HP Elec Motor, (2)Air Pumps, Skidded, 1" SteelFlex Lines, MYERS C-20 SoapPump p/b 20HP Elec Motor, 2-Compartment Mixing Tank, 75KVA Transformer Cabinets,MYERS Parts, 2" Ball Valves, 2"Gas Powered Trash Pump, All in8'W x 40'L Crimped Steel UtilityHouse, Skidded


Parts House w/Cabinets, WorkBench, Bolt Bins, PaintCabinets, Hyd Hoses, TFI FluidModule, (2) MISSION 2" x 3"Cent Pump, EATON Air Clutch,(2) Utility Hyd Winches & Misc(Most UNUSED)


Parts House w/StorageCabinets, Shelves, Bolt Bins,Work Bench, Vise, Pipe Fitting,Hoses, Butterfly Valves, PipeDope, Hyd Fittings, BOP Studs,Hand Tools, Hammer Wrenches,Tong Heads & Misc, Skidded


Parts/Change House w/StorageCabinets & Shelves, Mud Parts,Work Bench, Filters, HandTools, Benches, (9) Lockers & Misc, Skidded

21




Parts House w/Work Bench,Storage Cabinets, Paint Cabinet,Hyd Hoses, Bolt Bins, Wire RopeSlings, Mud Bucket, SafetySupplies, Rig Parts, CAT Parts,Fan Belts, Elec Parts (MostUNUSED), Skidded

_______ _______ _______2 A 85 (2-65) 7'10"W x 14'L Mud House

w/Hopper, Sink, Shower,Handrails & Misc, Skidded

_______ _______ _______2 A 86 (2-67) 8'H x 7'6"W x 40'L 400-Bbl

Water Tank w/7'L CoveredPorch, (2) MCM 2" x 3" CentPumps, Ea p/b 30HP Elec Motor,Skidded

_______ _______ _______2 A 87 (2-68) 8'Dia x 28'L 10,000-Gal

Fuel Tank w/(2) Elec TransferPumps, GPRO Fuel Pump, 10'LParts Room w/4-CompartmentLubester, Shelves w/Filters,Skidded

_______ _______ _______2 A 88 (2-69) 7'6"W x 7'H x 11'L 95-Bbl

Trip Tank w/3'L Porch, MISSION3" x 2" Cent Pump p/b 25HP ElecMotor, Top-Mtd Walkway,Skidded

22



_______ _______ _______2 A 89 (2-70) 7'H x 10'W x 35'8"L 440-

Bbl Crimped Steel Suction Tankw/12'L Covered Porch, (2)COBRA 5" x 6" Cent Pumps, Eap/b 60HP Elec Motor, (3)MAX2000 Agitators, Ea p/b 10HPElec Motor, (3) Compartments,Top-Mtd Walkways, Safety Rails,Skidded

_______ _______ _______2 A 90 (2-71) 7'H x 10'W x 44'L 550-Bbl

Crimped Steel Shaker Tank w/(3)MAX2000 Agitators, Ea p/b 10HPElec Motor, (3) Compartments,Internal Plumbing, Top & Side-Mtd Walkways, Skidded

_______ _______ _______2 A 91 (2-72) (3) MI SWACO Mongoose

Liner Shale Shakers, Mtd on7'10"W x 24'L Covered Frame

_______ _______ _______2 A 92 (2-73) (7) 10'W x 10'7"L Pit

Roofs, Mtd on Transport Skidw/Basket & 3'W x 30"H x 5'LTank

_______ _______ _______2 A 93 (2-74) ARCTIC T-250 250-Ton 5-

Sheave Block w/Becket &Raising Line Sheave

_______ _______ _______2 A 94 (2-75) SI275 27-1/2" Rotary Table

w/Split Master Bushing

23



_______ _______ _______2 A 95 (2-76) NOV HPU p/b 40HP Elec

Motor w/Hyd Hoses

_______ _______ _______2 A 96 (2-77) 30"H x 6'9"W x 5'6"L Junk

Box w/BJ 5" 250-Ton CL DrillPipe Elevators, 7" SD Elevators,Slip Bowl w/Slips, Dressed 5",(2) WASHINGTON RotatingHeads, 11-Seg Drill Collar Slip,Tong Heads, (17) ChangeoverSubs, (7) Lift Subs, Drill PipeSlips & Misc

_______ _______ _______2 A 97 (2-78) (4) Suitcases w/Hyd Lines,

(2) Totes w/Wind Walls

_______ _______ _______2 A 98 (2-79) (2) MISSION 1-1/2" x 2"

Cent Pumps, Ea p/b 5HP ElecMotors, on 4'W x 5'L Frame

_______ _______ _______2 A 99 (2-80) Freshwater Plastic Tote

w/Hose Reel & Hose, PW Gun,1/2" Air Diaphragm Pump, onStand

_______ _______ _______2 A 100 (2-81) 7'6"W x 28"H x 34'L Pipe

Tub w/KEYSTONE DownholeOilers, (2) Mufflers, 4", 2" & 3"High Pressure & Suction Hoses,Mud Lines & Misc

24



_______ _______ _______2 A 101 (2-82) 7'6"W x 28"H x 34'L Pipe

Tub w/WASHINGTON Air Bowl,INGERSOLL RAND KU5 AirHoist, Air Slips, SkiddingBeams, Handrails, 2-1/16"Manual Valves, Safety FloorMats & Misc

_______ _______ _______2 A 102 (2-83) 7'6"W x 28"H x 34'L Pipe

Tub w/Caustic Tank, Handrails,Floor Plates, Flowline, Stands &Misc

_______ _______ _______2 A 103 (2-84) 7'6"W x 28"H x 34'L Pipe

Tub w/Flowline & Mud Lines

_______ _______ _______2 A 104 (2-85) 23"H x 2'W x 3'9"L Fuel

Tank w/FILL RITE 12V FuelPump, on Forklift Skid

_______ _______ _______2 A 105 (2-86) (2) 8'W x 30'L & 40'L Rig

Mats w/Wood Center


25





Lots 107 thru 144

_______ _______ _______4 A 107 (4-2) OILWORKS 1000 S/D

Drwwks, S/N-007, LEBUS f/1-1/4" Line, Crown-O-Matic,EATON 236 Disc Clutch Brake,(3) ROTZLER Hyd UtilityWinches, OILWORKS 2-Eng In-Line Compound, QUINCY 390 AirCompressor p/b (2) CAT C-18Diesel Engs, S/N-WJH3740 &WJH03746, w/Air Starters,Radiators, Gauges, Eaw/OILWORKS C-195-100 TorqueConverters, ADI 500,000# WtIndicator, Skidded

26



_______ _______ _______4 A 108 (4-3) FULL CIRCLE 142'H

500,000# SHL Cantilever Mast,Crown Block w/(6) 42" & (1) 54"Sheaves, Standpipe, RackingBoard, Mast Stand, FULLCIRCLE 16'H x 52'L Box-On-BoxSub w/Swingout DH Supports,SULLIVAN PALATEK Elec AirCompressor, COBRA 3" x 2"Cent Pump p/b 20HP Elec Motor,1" Steel Flex BOP Lines, AirVolume Tank, Mud Line, (4) CMChain Hoists, (2) COBRA 2" x 3"Cent Pumps, Ea p/b 30HP ElecMotors, Deadline Anchor, Stairs,Skidded, Catwalk, V-Door & PipeRacks

_______ _______ _______4 A 109 (4-4) 2011 TFI F-1600 Triplex

Pump, S/N-N/A, w/Forged SteelFluid Ends & Quick ChangeCaps, 5000# PulsationDampener, OTECO 3" ShearRelief Valve, Type D PressureGauge, Suction Screen,MISSION 6" x 5" ChargingPump, Bullwheel, Skidded (Note:Busted Pulsation Dampener)

_______ _______ _______4 A 110 (4-5) 2011 TFI F-1600 Triplex

Pump, S/N-N/A, w/Forged SteelFluid Ends & Quick ChangeCaps, 5000# PulsationDampener, OTECO 3" ShearRelief Valve, Type D PressureGauge, Suction Screen,MISSION 6" x 5" ChargingPump, Bullwheel, Skidded

27



_______ _______ _______4 A 111 (4-6) (2) CAT SR-4B 455KW AC

Gens, S/Ns-7ZL01763 &7ZL01764, p/b (2) CAT C-15Engs, S/Ns-P1Z00350 &P1Z00351, Ea w/Elec Starter,Radiator, (4) Control Panels, 480-Volt Transformer, Mtd on 7'10"Wx 40'L Utility House, Skid

_______ _______ _______4 A 112 (4-9) BOP Package, Lots 113

thru 117

_______ _______ _______4 A 113 (4-10) TFI 13-5/8" 5000# Annular

Blowout Preventer w/FlangedBottom, Studded Top

_______ _______ _______4 A 114 (4-11) SHAFFER 13-5/8" 5000#

Dbl Ram Blowout Preventerw/Pipe & Blind Rams, StuddedTop & Bottom

_______ _______ _______4 A 115 (4-12) 13-5/8" x 23"H 5000#

Drilling Spool w/4-1/16" Outlets

_______ _______ _______4 A 116 (4-13) 4-1/16" 5000# HCR Valve

& 4-1/16" 5000# Gate Valve

_______ _______ _______4 A 117 (4-14) 8'W x 16'L Blowout

Preventer Transport Skid

28




w/(8) 10-Gal Bottles, TriplexPump p/b 25HP Elec Motor, (2)Air Pumps, Skidded, Soap Pumpp/b Elec Motor, 1" Steel FlexHoses, Elec Control Panels,Change Room w/Lockers & BinStorage, Mtd in 8'W x 40'LConex Container

_______ _______ _______4 A 119 (4-7) AMERI-TECH 12'W x 45'L

Rig Manager House w/Living,Office, Bed & Bath Area, ClimateControlled, Skidded

_______ _______ _______4 A 120 (4-8) AMERI-TECH 12'W x 45'L

Rig Manager's House w/Living,Office, Bed & Bath, ClimateControlled, Skidded


w/6'L Porch, 38'OAL w/Bench &Bin Storage, Elec ControlPanels, Fluorescent Lights,Work Bench w/Vise, Rig Heater,BOP Misc Parts, Skidded

_______ _______ _______4 A 122 (4-25) 8'W x 40'L Conex Parts

House, Mtd on 44'L Skid, Bench& Bin Storage, Vise, Chains,Built-In Lubester, Parts & Tools

_______ _______ _______4 A 123 (4-26) 7'8"W x 10'L Emergency

Wash House, Skidded

29



_______ _______ _______4 A 124 (4-27) 8'W x 20'L Conex Parts

House, Mtd on 24' Skid w/ElecLights, Subs, Fluid End Module,Air Clutch, Wire Rope Slings,Filters, BOP Bolts, Hyd Lines,Bin Storage, Skidded

_______ _______ _______4 A 125 (4-28) 8'W x 40'L Crimp Wall

Parts House w/Vise, WorkBench, Bins, Paint Locker,Butterfly Valves, HammerUnions, Hyd Control Panel,Skidded

_______ _______ _______4 A 126 (4-33) 2002 CHALLENGER

Homestead S/A Bumper PullCargo Trailer, VIN-5HABAO8112N021940,w/Shelves, Eye Wash Station,First Aid Kit, (3) Air Mast Kits,48" Bug Fan, (3) NORTH Model845 Breathing Apparatuses,Misc, 13" Tires(NOTE: BILL OF SALE ONLY)

_______ _______ _______4 A 127 (4-23) 8'10"H x 8'W x 43'9"L

Crimped Steel Open Top WaterTank, Skidded

_______ _______ _______4 A 128 (4-22) 96"Dia x 32'L Fuel Tank,

Mtd on 36'L Skid, (2) Fuel Pumpsp/b Elec Motors, on 4' Porch,Skidded

30



_______ _______ _______4 A 129 (4-17) 8'6"H x 8'6"W x 42'L

Suction Tank w/10' CoveredPorch, (2) 6" x 5" x 14" CentPumps p/b 60HP Elec Motors, (3)Compartments, (3) Agitators,Internal Plumbing, Top-MtdWalkways, Skidded

_______ _______ _______4 A 130 (4-18) 8'6"H x 8'6"W x 52'L

Shaker Tank w/(3)Compartments, (2) Agitators,Internal Plumbing, Top-MtdWalkways, Skidded

_______ _______ _______4 A 131 (4-19) MI SWACO Mongoose

Shale Shaker


Shale Shaker

_______ _______ _______4 A 133 (4-21) Fuel Tank w/Spill Box, (2)

MISSION 2" x 1-1/2" CentPumps, Ea p/b 5HP Elec Motor,Skidded, Block Stand & BeltCover

_______ _______ _______4 A 134 (4-16) GARDNER DENVER 27-

1/2" x 53-1/4" Rotary Table, w/oMaster Bushing, Elec PoweredWireline Measuring Device,Skidded, 8'w x 10'L Mat

31



_______ _______ _______4 A 135 (4-29) 8'W x 3'H x 16'L Junk

Baskets w/Bit Breakers, RotaryTongs, Elevators, Drill Pipe &Drill Collar Slips, Subs, MudBucket, 13-5/8" x 24" 5000#Drilling Spool, 8" Rotating Head

_______ _______ _______4 A 136 (4-30) 7'8"W x 28"H x 32'L pipe

Basket w/Hi & Low PressureHoses & Wire Rope

_______ _______ _______4 A 137 (4-31) 7'8"W x 28"H x 32'L Pipe

Basket w/ARCTIC 250-Ton Blockw/Becket, Skid System Parts,Stairs, Piping, Manifold

_______ _______ _______4 A 138 (4-32) 6'W x 36"H x 25'L Junk

Box w/Gate Valves, StingerAttachment f/CAT Telehandler,Stairs, Mufflers, Lift Valves,Piping

_______ _______ _______4 A 139 (4-33A) FIVE STAR Elec/Hyd

Wireline Unit

_______ _______ _______4 A 140 (4-34) 1-1/2" x 2" Cent Pump p/b

10HP Elec Motor, Steel Box, (2)8'W x 20'L rig Mats, SuctionHoses, (6) Upright Pipe Stands

_______ _______ _______4 A 141 (4-35) MILLER Bobcat 250

AC/DC Welder, 11,000 Watt Gen,on Covered Skid

32



_______ _______ _______4 A 142 (4-36) Lot of Misc Mud & Flow

Lines, Choke Lines

_______ _______ _______4 A 143 (4-37) (2) Upright Pipe Stands

w/Misc Casing & Pipe

_______ _______ _______4 A 144 (4-37A) (14) 8'W x Various

Length Rig Mats, Stairs, 4", 3" &2" High Pressure & SuctionHoses, (4) Pit Roofs & Misc


33





Lots 146 thru 179

_______ _______ _______4 A 146 (4-39) OILWORKS 1000 Drwwks,

S/N-028, Crown-O-Matic, EATON236 Disc Clutch Brake, (3)ROTZLER Hyd Utility Winches,OILWORKS 2-Eng In-LineCompound w/QUINCY 390 AirCompressor p/b (2) CAT C-18630HP Diesel Engs, S/Ns-WRH0996 & WRH00907, Ea w/AirStarter, Radiator, Gauges,OILWORKS C-195-100 TorqueConverter, Skidded (Note:Missing Main Drum)

_______ _______ _______1 A 147 OILWORKS 1000 Main Drwwks

Drum, LEBUS f/1-1/4" Linew/Brake Flanges, Sprockets,Bearing Houses (REBUILT)

34



_______ _______ _______4 A 148 (4-40) FULL CIRCLE 142'H

550,000# SHL Cantilever Mast,Crown Block w/(6) 42" & (1) 54"Sheaves, Stand Pipe, RackingBoard, Deadline Anchor, FULLCIRCLE 16'H x 52'L Box-On-BoxSub w/Swingout DH Supports,KEYSTONE Downhole Oiler,Mud Line, Air Volume Tank,WCR Brake Cooling System p/b(2) 30HP Elec Motors w/(2)COBRA 3" x 2" Cent Pumps,Water Tank, 1" Steel Flex BOPLine, Skidded w/Mast Stand,Stairs, V-Door & Catwalk, (2)Pipe Racks Under CrownSection

_______ _______ _______4 A 149 (4-41) 2011 TFI F-1600 Triplex

Pump, S/N-201108, w/ForgedSteel Fluid Ends & QuickChange Caps, 5000# PulsationDampener, OTECO 3" ShearRelief Valve, Type D PressureGauge, Suction Screen,MISSION 6" x 5" ChargingPump, Bullwheel, Skidded

_______ _______ _______4 A 150 (4-42) 2011 TFI F-1600 Triplex

Pump, S/N-N/A, w/Forged SteelFluid Ends & Quick ChangeCaps, 5000# PulsationDampener, OTECO 3" ShearRelief Valve, Type D PressureGauge, Suction Screen,MISSION 6" x 5" ChargingPump, Bullwheel, Skidded

35



_______ _______ _______4 A 151 (4-43) (2) 2011 CAT SR-4B

455KW AC Gens, Ea p/b CAT C-15 Diesel Engs, S/Ns-P3Z00517& P3Z00516, Ea w/Elec Starter,Radiator, Gauge Panel, SQUARED Elec System, 112.5 KVATransformer, SPEEDAIRE TwinElec Powered Air Compressor,Mtd in 10'W x 45'L Utility House,Skidded

_______ _______ _______4 A 152 (4-47) 13-5/8" BOP Package,

Lots 153 thru 155

_______ _______ _______4 A 153 (4-48) 13-5/8" 5000# Spherical

Blowout Preventer w/FlangedBottom & Studded Top

_______ _______ _______4 A 154 (4-49) 13-5/8" 5000# Dbl Ram

Blowout Preventer w/5" Pipe &Blind Rams, Studded Top &Bottom, 13-5/8" x 23"H 5000#Drill Spool w/4-1/16" Outlets

_______ _______ _______4 A 155 (4-50) 6'W x 16'L 3-Stump BOP

Transport Skid

_______ _______ _______4 A 156 (4-76) WASHINGTON 5000/3000#

Air Bowl w/Rotating head, 13-5/8" x 36"H 5000# Spacer Spool& 25"ID Air Bowl

36




w/(12) 10-Gal Bottles, TriplexPump p/b 25HP Elec Motor, (2)Air Pumps, Skidded, MYERS C-20 Soap Pump p/b Elec Motor, 2-Compartment Mixing Tank, PartShelves & Cabinets, 1" SteelFlex Lines, Misc, Mtd in 8'w x40'L Crimped Steel House,Skidded

_______ _______ _______4 A 158 (4-52) 5000# Choke Manifold w/4-

1/16" & 2-1/16" Manual Valves,(2) Manual Chokes, 48"Dia x 15'LGas Buster, Skidded

_______ _______ _______4 A 159 (4-46) AMERI-TECH 12'W x 45'L

Rig Manager's House w/Living,Office, Bed & Bathrooms,Climate Controlled, Skidded

_______ _______ _______4 A 160 (4-60) 7'10"W x 26'L Top

Doghouse w/6' Porch, AOI WtIndicator, BOP Remote Unit,Bench & Bin Storage,Fluorescent Lights, Rig Heater,Elec Control Panel, Skidded


Change House w/Benches, (20)Lockers, Climate Control,Lights, Skidded

_______ _______ _______4 A 162 (4-61) HPU p/b 40HP Elec Motor,

Skidded

37




Parts House w/Cabinets &Shelves, (4) COFFING 15-TonChain Hoists, Subs, Slip Dies,Safety Equipment, Hyd Fitting &Couplings, Tong & Slip Dies,(15) Lockers & Misc, Skidded


Parts House w/Cabinets &Shelves, Elec Service LoopCable, Remote Hyd ControlStation, Mud Pump Parts, Liner,Hyd Seat Puller, ButterflyValves, Paint Cabinet, Bolt Bins,Hyd Hoses, Filters, ChangeoverSubs, Roller Chain (MostUNUSED), Skidded


Parts House w/Shelves,Cabinets, Work Bench, Vise,PORTER CABLE Drill Press,Tong Heads, Hand Tools, BoltBins, Pipe Fittings, WILDON 2"Air Pump, Butterfly & Ball Valves& Misc, Skidded

_______ _______ _______4 A 166 (4-91) 2008 CRG 14979 Boiler,

S/N-ES70215015, 200HPw/Power Flame Burner, WaterTank, (2) Elec 2" Pumps, FilterSystem, 2" Hoses, Mtd in 11'8"Wx 43'L Crimped Steel UtilityHouse, Skidded

38



_______ _______ _______4 A 167 (4-71) HPU p/b WEG Elec Motor,

Hyd Tank, Skidded, FORUMWR80 Iron Roughneck

_______ _______ _______4 A 168 (4-72) 8'W x 18'L Mud House

w/Hopper, Water Tank,Emergency Shower, (2) 1-1/2" x1" Cent Pumps, Ea p/b 3HP ElecMotor, 6'W x 10'H x 8'L Stand,Misc Stairs & Handrails

_______ _______ _______4 A 169 (4-72A) 8'W x 10'L Emergency

Shower House w/Water Tank &Shower, Skidded

_______ _______ _______4 A 170 (4-59) 8'W x 9'H x 40'L Water

Tank w/(2) 3" x 2" x 8" CentPumps p/b 30HP Elec Motors, (2)480-Volt Pump Controls, Mtd on8' Covered Porch, 48'OAL Skid

_______ _______ _______4 A 171 (4-58) 10'Dia x 28'L 12,000-Gal

Fuel Tank w/(2) Elec TransferPumps, 10'L Parts Room w/4-Compartment Lubester &Shelves, Skidded

_______ _______ _______4 A 172 (4-45) ARCTIC T-250 5-Sheave

Block w/Becket

_______ _______ _______4 A 173 (4-55) ZP 27-1/2" Rotary Table

w/Solid Master Bushing

39




Shale Shaker


Shale Shaker

_______ _______ _______4 A 176 (4-67) 7'6"W x 30"H x 35'L Pipe

Tub w/(2) 11-Seg Drill CollarSlips, Wind Tarps, (2) BJ RotaryTongs, (2) Elevator Links, SplitMaster Bushings, WASHINGTONRotating Head, Mud Hopper,Stairs, Safety Rails, Misc

_______ _______ _______4 A 177 (4-68) 7'6"W x 28"H x 35'L Pipe

Tub w/Sub Floor Plates, SafetyRails, Hoses, (2) WASHINGTONRotating Heads, Air Bowl,Changeover Subs & Misc

_______ _______ _______4 A 178 (4-69) 7'6"W x 30"H x 38'L Pipe

Tub w/WASHINGTON 13-5/8" AirBowl, IRI 6-Cyl Air Winch, FIVESTAR Wireline Unit, Lift Subs,LP Valves, Gate Valves, RotaryTongs, Substructure SpreaderBeams

_______ _______ _______4 A 179 (4-70) 7'6"W x 30"H x 38'L Pipe

Tub w/Stairs, SubstructureSteel, BOP Trolley, Mud Piping


40





Lots 181 thru 217

_______ _______ _______14 A 181 (14-2) OILWORKS 1000 S/D

Drwwks, S/N-008, LEBUS f/1-1/4" Line, Crown-O-Matic,EATON 236 Auxiliary Brake, (2)ROTZLER Hyd Utility Winches,OILWORKS 2-Eng In-LineCompound w/QUINCY 390 AirCompressor p/b (2) CAT C-18630HP Diesel Engs, S/Ns-WJH03743 & N/A, Ea w/AirStarter, Radiator, Gauges,OILWORKS C-195-100 TorqueConverters, on 15'W x 38'L Skid

41



_______ _______ _______14 A 182 (14-3) LEE C. MOORE 131'H x

18'6"W 550,000# SHL CantileverMast, Crown Block w/(5) 42"Sheaves & (1) 54" FastlineSheave, Safety Platform, TongWeights, 4" Standpipe, MastStand, Racking Board, (5) 8'W x40'L Rig Mats, FULL CIRCLE16'H x 52'L Box-On-BoxSubstructure w/Rotary Beams,Swingout DH Supports NOVHPU p/b 40HP Elec Motor,QUINCY 390 Air Compressor p/b25HP Elec Motor, (2) Air VolumeTanks, SPD 4" x 3" Cent Pumpp/b 30HP Elec Motor,KEYSTONE Downhole Oiler,BOP Trolley Beams, LED Lights,Skidded

_______ _______ _______14 A 183 (14-4) TFI F-1600 Triplex Mud

Pump w/Forged Steel Fluid Ends& Quick Change Caps, K-205000# Pulsation Dampener,OTECO 3" Shear Relief Valve,Type D Pressure Gauge, SuctionScreen, MISSION 5" x 6"Charging Pump, Bullwheel,Skidded

42



_______ _______ _______14 A 184 (14-5) TFI F-1600 Triplex Mud

Pump w/Forged Steel Fluid Ends& Quick Change Caps, K-205000# Pulsation Dampener,OTECO 3" Shear Relief Valve,Type D Pressure Gauge, SuctionScreen, MISSION 5" x 6"Charging Pump, Bullwheel,Skidded

_______ _______ _______14 A 185 (14-6) (2) 2010 CAT SR-4B

455KW AC Gens, Ea p/b CAT C-15 Diesel Eng, S/Ns-P1Z00330 &N/A, Ea w/Elec Starter, Radiator,Gauges, Mtd in 8'W x 40'LCrimped Steel Utility Housew/SQUARE D Elec Panel,SQUARE D 112.5 Transformer,INGERSOLL RAND 2574 AirCompressor p/b Elec Motor,Volume Tank, Skidded

_______ _______ _______14 A 186 (14-7) 8'W x 20'L BOP 5-Stump

Transport Skid w/(3)WASHINGTON 5000/3000# AirBowls

_______ _______ _______14 A 187 (14-8) 6'W x 18'L BOP 3-Stump

Transport Skid w/11" 5000# x25"H Drilling Spool w/4-1/16" & 2-1/16" Outlets

43



_______ _______ _______14 A 188 (14-9) 5000# Choke Manifold

w/(3) 4-1/16" & (5) 2-1/16"Manual Valves, (2) ManualChokes, 48"Dia x 10'L GasBuster, on 8'W x 18'L Skid

_______ _______ _______14 A 189 (14-10) KOOMEY 15090-3S 5-

Station Closing Unit w/(10) 10-Gal Bottles, Triplex Pump p/b20HP Elec Motor, Air Pump,Skidded, MYER C-20 TriplexPump p/b 40HP Elec Motor,Mixing Tank, Change Roomw/(16) Lockers, All Mtd in 8'W x40'L Crimped Steel Utility House,Skidded

_______ _______ _______14 A 190 (14-11) AMERI-TECH 10'W x 48'L

Rig Manager's House w/Office,Kitchen, Bath & Bed Area,Climate Controlled, Skidded

_______ _______ _______14 A 191 (14-12) 7'8"W x 28'L Crimped

Steel Top Doghouse w/3'LCovered Porch, Knowledge Box,Bench & Cabinet Storage, BoltBins, Hand Tools, Misc RigParts, Skidded

44




Parts House w/Cabinet &Shelves Storage, Work Bench,LANDA Elec Power Washer, Hyd& Pipe Fittings, Bolt Bins,Filters, Mud Pump Parts, ElecStarters, Hyd Hoses & Misc,Skidded

_______ _______ _______14 A 193 (14-14) PORT-A-COOL Elec

Powered Cooling Unit w/352-GalWater Tank, Benches, on 2011TIGER T/A Covered Trailer, VIN-5UTBU162XBM001969, 16'LBumper Pull, 15" Tires(NOTE: BILL OF SALE ONLY)

_______ _______ _______14 A 194 (14-86) 2011 SUPERIOR BOILER

WORKS 8-5-750 Boiler, S/N-17154, w/Blower, Water Tank, (2)Elec Powered Pumps, (2)RUFFNECK Heaters, 2" Hoses,Mtd in 9'10"W x 40'L CrimpedSteel House, Skidded

_______ _______ _______14 A 195 (14-15) 8'W x 8'L Shower House,

Skidded

_______ _______ _______14 A 196 (14-16) 8'Dia x 29'L 11,000-Gal

Fuel Tank w/(2) Elec TransferPumps, 3-CompartmentLubester, on 40'L Skid

45



_______ _______ _______14 A 197 (14-17) 6'H x 10'W x 40'L 500-Bbl

Open Top Water Tank w/8'LCovered Porch, (2) FIVE STAR2" x 3" Cent Pumps, Ea p/b 20HPElec Motor, Top Walkways,Safety Rails, Skidded

_______ _______ _______14 A 198 (14-18) 6'H x 10'W x 38'L 400-Bbl

Crimped Steel Suction Tankw/10'L Covered Porch, MISSION& MCM 5" x 6" Cent Pumps, Eap/b 50HP Elec Motor, Hopper, (2)MAX2000 Agitators, Ea p/b 10HPElec Motor, (3) Compartments,Internal Plumbing, TopWalkways, Skidded

_______ _______ _______14 A 199 (14-19) 6'H x 10'W x 38'L 400-Bbl

Crimped Steel Shaker Tankw/8'L Covered Porch, (2)MAX2000 Agitators, Ea p/b 10HPElec Motor, (3) Compartments,Internal Plumbing, TopWalkways, Skidded

_______ _______ _______14 A 200 (14-20) (2) Mongoose Linear

Motion Shale Shakers, United on13'6"W x 16'L Skid w/SafetyRails

_______ _______ _______14 A 201 (14-21) (8) 11'5"W x 10'L Steel

Pit Roofs, On 8'W x 17'LTransport Skid w/Junk Basket

46



_______ _______ _______14 A 202 (14-22) ZP-205 20-1/2" Rotary

Table

_______ _______ _______14 A 203 (14-23) ARCTIC T-250 5-Sheave

Traveling Block w/Becket

_______ _______ _______14 A 204 (14-24) 5'5"W x 4'H x 15'L

Platform, Skidded w/(1) Stairway

_______ _______ _______14 A 205 (14-25) 7'Dia Steel Spool w/1-

1/4" Drill Line

_______ _______ _______14 A 206 (14-26) HOTSY Pressure Washer

p/b VANGUARD 16HP Gas Eng,on 4'5"W x 5'10"L Covered Skid


(w/o Power), on 4'5"W x 5'10"LCovered Skid

_______ _______ _______14 A 208 (14-28) 30"Dia x 6'L Fuel Tank

w/Spill Container

_______ _______ _______14 A 209 (14-29) (2) MISSION 1-1/2" x 2"

Cent Pumps, Ea p/b 5HP ElecMotor, on 4'W x 5'L Skid

_______ _______ _______14 A 210 (14-30) FIVE STAR Elec/Hyd

Wireline Measuring Unit

47



_______ _______ _______14 A 211 (14-31) 7'6"W x 30"H x 34'L Pipe

Tub w/INGERSOLL RAND KU5Air Hoist, (2) HT Rotary Tongs,GRAYCHAIN 3570 Air Spinner,BLOHM VOSS Air Slips, (2) DrillCollar Slips, Life Subs, (2)WASHINGTON Rotating Heads,Mud Agitator, Misc Pipe

_______ _______ _______14 A 212 (14-32) 7'6"W x 30"H x 34'L Pipe

Tub w/3-1/2"ID Rotary Hose, 4",3" & 2" Suction Hoses, SubFloor Plates & Misc

_______ _______ _______14 A 213 (14-33) 7'6"W x 30"H x 34'L Pipe

Tub w/Blooey Lines, Flow Lines,Sub Floor Plates & Misc

_______ _______ _______14 A 214 (14-34) (9) 8'W x 40'L Steel Rig

Mats w/(2) Rig Stairs

_______ _______ _______14 A 215 (14-35) (3) 8'W x 40'L Steel Rig

Mats, Misc Flowline & Stands,(2) Exhaust Mufflers, 18"H x 28'LPipe Rack, Misc

_______ _______ _______14 A 216 (14-36) (2) 8'W x 40'L Steel Rig

Mats, (2) Air Clutches, WindTarps, Steel Toolbox, FlowlineStands, (2) Steel Racks w/MiscStripping Lumber, Mousehole &Shuck

48







Lots 219 thru 257

_______ _______ _______14 A 219 (14-40) OILWORKS 1000 S/D

Drwwks, S/N-009, LEBUS f/1-1/4" Line, Crown-O-Matic,EATON 236 Auxiliary Brake, (3)ROTZLER Hyd Utility Winches,OILWORKS 2-Eng In-LineCompound w/QUINCY 390 AirCompressor p/b (2) CAT C-18630HP Diesel Engs, S/Ns-WJH04587 & WJH04549, Eaw/Air Starter, Radiator, Gauges,NATIONAL C-195-100 TorqueConverters, on 15'W x 38'L Skid

49



_______ _______ _______14 A 220 (14-41) FULL CIRCLE 146'H

550,000# SHL Cantilever Mast,S/N-D01AM320, w/(5) 42" & (1)54" Sheaves, Tong Weight, 4"Standpipe, Mast Stand, RackingBoard, Deadline Anchor, LEDLights, (4) 8'W x 38'L Rig Mats,FULL CIRCLE 16'H x 52'L Box-On-Box Substructure w/RotaryBeams, Swingout DH Supports,WCR Brake Cooling Radiator &Tank, MISSION 2" x 3" CentPump p/b 20HP Elec Motor, (2)MCM 3" x 4" Cent Pumps, Ea p/b30HP Elec Motor, Air VolumeTank, Mudline, Skidded, 43"H x5'W x 58'L Catwalk, Skidded,Duck Pond, (2) MISSION 1-1/2" x2" Cent Pumps, Ea p/b 3HP ElecMotor, Stairs, V-Door

_______ _______ _______14 A 221 (14-42) TFI F-1600 Triplex Pump,

S/N-200902, w/Forged SteelFluid Ends & Quick ChangeCaps, K-20 5000# PulsationDampener, OTECO 3" ShearRelief Valve, Type D PressureGauge, MISSION 5" x 6" CentPumps, Suction Screen,Bullwheel, Skidded

50



_______ _______ _______14 A 222 (14-43) CQ GEARBOX F-1600

Triplex Pump w/Forged SteelFluid Ends & Quick ChangeCaps, K-20 5000# PulsationDampener, OTECO 3" ShearRelief Valve, Type D PressureGauge, Suction Screen,MISSION 5" x 6' Charging Pump,Bullwheel, Skidded

_______ _______ _______14 A 223 (14-44) (2) 2012 & 2008 CAT SR-

4B 455KW AC Gens, Ea p/b CATC-15 530HP Diesel Eng, S/Ns-P3Z00544 & N/A, Ea w/ElecStarter, Radiator, Gauge Panels,Skidded, INGERSOLL RAND2475 Air Compressor, SQUARED Elec Station, SQUARE D 112.5KVA Transformer, All in 10'W x45'L Utility House, Skidded

_______ _______ _______14 A 224 (14-45) CAT 450KW AC Gen, S/N-

00000KCBX00885, p/b CAT 3456Diesel Eng, S/N-3PG01461,w/Elec Starter, Radiator,Gauges, Breaker Panel, Skidded

_______ _______ _______14 A 225 (14-45A) 7'10"W x 33'L Parts

House w/Bolt Bins, PipeFittings, Hoses, Tong Body &Whole Lot More, Vented PaintBins, Skidded

51



_______ _______ _______14 A 226 (14-45B) 8'W x 20'L Conex Parts

House w/Pump Module &Discharge Manifold, 5/8" WireRope (UNUSED), Wire RopeSlings, Hyd Tools, Elec Cable,Large Assortment of Filters,Lighted & Heated, Skidded

_______ _______ _______14 A 227 (14-46) GUANGZHOU DONGSU 5-

Station Closing Unit w/(8) 10-GalBottles, Triplex Pump p/b 20HPElec Motor, Air Pump, Skidded,MYERS C20 Triplex Pump p/b40HP Elec Motor, 2-Compartment Mixing Tank, 1"Steel Flex Hoses, (4) BOP ChainHoists, (2) 4-1/16" Valves,GRACO 2" Air Pump, (3)Lockers, 48" Bug Blower, RigParts & Misc, Skidded

_______ _______ _______14 A 228 (14-47) 5000# Choke Manifold

w/(6) 4-1/16" & (4) 2-1/16"Manual Valves, (2) ManualChokes, Skidded, 48"Dia x 15'LGas Buster, on 28'L Skid

_______ _______ _______14 A 229 (14-48) 8'Dia x 36'L 300-Bbl

Water Tank, Skidded

_______ _______ _______14 A 230 (14-49) 8'Dia x 36'L 300-Bbl

Water Tank, Skidded

52



_______ _______ _______14 A 231 (14-50) 8'Dia x 30'L 12,000-Gal

Fuel Tank w/(2) Elec TransferPumps, 10'L Parts Roomw/Cabinets, 4-CompartmentLubester, Skidded

_______ _______ _______14 A 232 (14-51) 6'H x 10'W x 40'L

Crimped Steel 420-Bbl SuctionTank w/10'L Porch, FORUM 5" x6" Cent Pump p/b 75HP ElecMotor, (1) 75HP Elec Motor, (3)MAX2000 Agitators, Ea p/b 10HPElec Motor, (3) Compartments,Internal Plumbing, Top-MtdWalkways, Safety Rails, Skidded

_______ _______ _______14 A 233 (14-52) 6'H x 10'W x 40'L

Crimped Steel 420-Bbl ShakerTank w/10'L Covered Porch, (2)MAX2000 Agitators, Ea p/b 10HPElec Motor, (3) Compartments,Internal Plumbing, Top-MtdWalkways, Safety Rails, Skidded


Linear Shale Shaker


Linear Shale Shaker

_______ _______ _______14 A 236 (14-55) AMERI-TECH 10'W x 50'L

Rig Manager's House w/Office,Living, Bed & Bath Area, ClimateControlled, Skidded

53




Top Doghouse w/4'L CoveredPorch, Wt Indicator, KnowledgeBox, Storage Cabinets &Benches, Bolt Bins, KEYSTONEDownhole Oiler, Hand Tools, RigParts & Misc, Skidded


Change House w/(20) Lockers,Benches, Skidded


Parts House w/Work Bench,Vise, Storage Cabinets, BoltBins, 48" Bug Blower, (3)GRACO Air Pumps, Hand Tools,Paint Cabinet, Hyd Fittings & RigParts, Skidded


Parts House w/Work Bench,Vise, Storage Cabinets, Shelves,Hand Tools, Paint Cabinet, BOPStuds, Shaker Motor, TFI PumpParts, Hyd Fittings, Pipe Dope,Pulsation Dampener Bladders &Misc Skidded

54




Parts House w/INGERSOLLRAND 2475 Air Compressor,Work Bench, Bolt Bins, StorageCabinets, MISSION 2" x 3" CentPump, Pipe Fittings, Eng Filters,CAT Eng Parts, Load Chains, AirStarters, Skidded

_______ _______ _______14 A 242 (14-61) 10'W x 10'L Mud House,

Skidded

_______ _______ _______14 A 243 (14-62) 8'W x 10'L Shower

House, Skidded


Motor

_______ _______ _______14 A 245 (14-64) ARCTIC 5-Sheave

Block/Hook Combo w/RaisingLine Sheaves

_______ _______ _______14 A 246 (14-65) NATIONAL 20.5 20-1/2"

Rotary Table w/Split MasterBushings

_______ _______ _______14 A 247 (14-66) FIVE STAR Elec/Hyd

Wireline Unit

_______ _______ _______14 A 248 (14-67) LINCOLN Ranger 10,000

Welder/Gen p/b KOHLER 23 GasEng, VICTOR Cutting Torchw/Regulators, on 4'W x 6'L Skid

55



_______ _______ _______14 A 249 (14-68) 7'6"W x 28"H x 34'L Pipe

Tub w/WASHINGTON5000/3000# Air Bowl,Substructure Floor, Plates,Stairs, Mud Bucket, Mud Hopperw/Stand, Misc

_______ _______ _______14 A 250 (14-69) 8'W x 36"H x 20'L Junk

Box w/2'H x 3'W x 4'L Fuel Tank,FILL-RITE 12V Fuel Pump,MISSION 5' x 6" Cent Pump p/b50HP Elec Motor, LANDA ElecPowered Pressure Washer &Misc, Skidded

_______ _______ _______14 A 251 (14-70) 7'6"W x 28"H x 34'L Pipe

Tub w/4-1/16" HCR Valve, (2)Elevator Links, 11" 5000# x 16"HSpacer Spool, KEYSTONEDownhole Oiler, Drill Pipe Slips,Mud Line, Mousehole, Shuck &Misc

_______ _______ _______14 A 252 (14-71) 7'6"W x 27"H x 34'L Pipe

Tub w/WASHINGTON5000/3000# Air Bowl, RotatingHead, Mufflers, 4" Hoses, HandRails, MISSION Cent Pump &Misc

56



_______ _______ _______14 A 253 (14-72) 6'5"W x 44"H x 45'L Junk

Basket w/INGERSOLL RANDKU5 Air Hoist, GRAY PipeSpinner, (2) HT Rotary Tongs,Drill Collar Slips, WASHINGTONRotating Head, SDML 5" DrillPipe Slips, Hand Rails,Changeover Subs, I-BOP, WindTarps & Misc

_______ _______ _______14 A 254 (14-73) 7'6"W x 27"H x 34'L Pipe

Tub w/4", 3" & 2" High Pressure& Suction Hoses

_______ _______ _______14 A 255 (14-74) 7'6"Dia x 30'L Half Round

Tank w/20" Air Bowl, (2) EATONAir Clutches, (2) Elec Motors,Flowline Stands & Misc, Skidded

_______ _______ _______14 A 256 (14-75) 2'W x 5'H x 4'L Toolbox

w/Mud Pump Parts, 4'W x 6'LCovered Skid, Plastic WaterTank, Mud Hopper, Stairs, WoodRack, Stands

_______ _______ _______14 A 257 (14-78) (2) 8'W x Various Length

Rig Mats w/4-1/16" HCR Valve, 4-1/16" Manual Valve, 2-1/16"Manual & Check Valve,Substructure Floor Plates, WireRope, 2"HP & Suction Hoses


57





Lots 259 thru 295

_______ _______ _______2 A 259 (2-2) SKYTOP BREWSTER NE-75

1000HP DC Elec S/D Drwwks,LEBUS f/1-1/8" Line, Catheads,Crown-O-Matic p/b GE 752Traction Motor w/Blower, WtIndicator, Skidded

_______ _______ _______2 A 260 (2-3) PARMAC 342 Hydromatic

Brake, Skidded

_______ _______ _______2 A 261 (2-4) SUPERIOR 142'H 768,000#

SHL Cantilever Mast w/5-SheaveCrown w/42" & 54" Sheaves,Lights, (5) 8'W x 40'L Rig Mats,28"W x 42'L Skid w/Mud Line,Mast Stand, Racking Board,BREWSTER 20'H x 54'L Box-On-Box Substructure w/DeadlineAnchor, KEYSTONE DownholeOiler, Air Volume Tank, 1" SteelFlex Hoses, Swingout DHSupports, 3-1/2"ID Rotary Hose,Stairs

_______ _______ _______2 A 262 (2-5) 44"H x 5'9"W x 50'L

Catwalk w/V-Door, Skidded

58



_______ _______ _______2 A 263 (2-10) TFI F-1600 Triplex Pump

w/Forged Steel Fluid Ends &Quick Change Caps, K-20 5000#Pulsation Dampener, OTECO 3"Shear Relief Valve, Type DPressure Gauge, SuctionScreen, COBRA 5" x 6" ChargingPump, Bullwheel, Skidded

_______ _______ _______2 A 264 (2-11) TFI F-1600 Triplex Pump

w/Forged Steel Fluid Ends &Quick Change Caps, K-20 5000#Pulsation Dampener, OTECO 3"Shear Relief Valve, Type DPressure Gauge, SuctionScreen, MISSION 5" x 6"Charging Pump, Bullwheel,Skidded

_______ _______ _______2 A 265 (2-6) 2011 CAT SR-5 910KW AC

Gen, S/N-GIN00548, p/b CAT C-32 Diesel Eng, S/N-N/A, w/ElecStarter, Radiator, Gauge Panel,Muffler, Mtd on Covered skid

_______ _______ _______2 A 266 (2-7) 2004 KATO 800KW AC Gen

p/b CAT 3508 682HP Diesel Eng,S/N-2HW08846, w/Air Starter,Radiator, Gauge Panel, QUINCY390 Air Compressor p/b LISTER2-Cyl Diesel Eng, Muffler, Mtd onCovered Skid

59



_______ _______ _______2 A 267 (2-8) 2004 KATO 800KW AC Gen

p/b CAT 3508 682HP Diesel Eng,S/N-2HW00279, w/Air Starter,Radiator, Gauge Panel, Muffler,Mtd on Covered Skid

_______ _______ _______2 A 268 (2-9) 10'W x 16'L SCR House

w/16'L Covered Porch, GE 8000Line Motor Control Station,Climate Controlled, (4)Transformers, (3) QUINCY AirCompressors, Ea p/b 20HP ElecMotor, Skidded

_______ _______ _______2 A 269 (2-12) AMERI-TECH 10'W x 45'L

Rig Manager's House w/Office,Living, Bed & Bath Area,Furnished, Climate Controlled,Skidded


w/4'L Porch, Stairs, Top SafetyRails, Knowledge Box, Benches,Cabinets, Remote Closing UnitStation, Skidded


Change House w/Benches,Cabinets, (25) Lockers, ElecHeat, Lights & Misc, Skidded

60




Parts House w/Storage Cabinets& Shelves, (2) Drums Hyd Oil,RUFFNECK Heater, Eng Lift,Wire Rope Slings, Work Bench,Hyd Fittings & Hoses, Misc,Skidded


w/(16) 10-Gal Bottles, TriplexPump p/b 20HP Elec Motor, (2)Air Pumps, Skidded, 5-Compartment Lubester, 1" SteelFlex Lines, All on 8'W x 30'LCovered Skid


Soap/Parts House w/(2) StorageCabinets, Bolt Bins, 48" BugBlower, (3) INGERSOLL RANDAir Pumps, Soap Mixing Tank,(2) MISSION 4" x 3" Cent Pumps,Ea p/b 30HP Elec Motor,MISSION 5" x 6" Cent Pump(UNUSED), Elec Heat, Lights,Skidded


Parts House w/TFI Pump Parts,Bolt Bins, Drill Pipe Slip, Band V-Belts, Pulsation DampenerBladder, Paint Cabinet, StorageCabinets, Filters, Hyd Hoses,Alternators, Work Bench, ElecParts & Misc, Skidded (MostUNUSED)

61



_______ _______ _______2 A 276 (2-19) 8'W x 25'L Parts House

w/Shelves & Cabinets, LoadChains, Binders, Mud Bucket,Pipe Fittings, Butterfly Valves,Hammer Wrenches, WorkBench, Hoses & Misc, Skidded

_______ _______ _______2 A 277 (2-20) 8'W x 8'L Shower House

w/Water Tank, Shower, (5) 55-Gal Drums, Heater, Lights,Skidded

_______ _______ _______2 A 278 (2-21) 7'H x 10'W x 40'L Crimped

Steel 500-Bbl Water Tank w/8'LCovered Porch, (2) MISSION 4" x3" Cent Pumps, Ea p/b 30HPElec Motor, Top-Mtd Walkways,Safety Rails, Skidded

_______ _______ _______2 A 279 (2-22) 10'Dia x 28'L 16,000-Gal

Fuel Tank w/8'L Porch, (2) ElecTransfer Pumps, Skidded

_______ _______ _______2 A 280 (2-23) 7'H x 10'W x 40'L 500-Bbl

Crimped Steel Suction Tankw/12'L Covered Porch, MISSION& MCM 5" x 6" Cent Pumps, Eap/b 60HP Elec Motor, (3)Agitators, Ea p/b 10HP ElecMotor, (3) Compartments,Internal Plumbing, Top-MtdWalkway, Safety Rails, Skidded

62



_______ _______ _______2 A 281 (2-24) 7'H x 10'W x 40'L 500-Bbl

Crimped Steel Shaker Tankw/12'L Covered Porch, (2)MISSION 5" x 6' Cent Pumps, Eap/b 60HP Elec Motor, (2)Agitators, Ea p/b 10HP ElecMotor, (3) Compartments,Internal Plumbing, Top-MtdWalkways, Safety Rails, Skidded


Linear Shale Shaker


Linear Shale Shaker

_______ _______ _______2 A 284 (2-27) IDECO 42"Dia 360-Ton 5-

Sheave Block w/Becket

_______ _______ _______2 A 285 (2-28) NATIONAL 22-1/2" Rotary

Table w/Split Master Bushings


Motor w/Hoses

_______ _______ _______2 A 287 (2-30) MATHEY Elec/Hyd

Wireline Unit


p/b VANGAURD 16HP Gas Eng,Water Tank w/Hose Reel, 100-Gal Fuel Tank w/12-Volt Pump

63



_______ _______ _______2 A 289 (2-32) (2) MISSION 1-1/2" x 2"

Cent Pumps p/b 5HP ElecMotors, on 4'W x 6'L Skid, FuelTank f/Pickup, Rig Water Tankw/Hose Reel

_______ _______ _______2 A 290 (2-33) 7'6"W x 28"H x 34'L Pipe

Tub w/Flowline & Stands, MudLine, (2) MISSON Cent Pumps,Misc

_______ _______ _______2 A 291 (2-34) 7'6"W x 29"H x 34'L Pipe

Tub w/WASHINGTON Air Bowl,Elevators, Slips, ChangeoverSubs, (2) Rotary Tongs, LiftSubs, Misc

_______ _______ _______2 A 292 (2-35) 7'6"W x 29"H x 34'L Pipe

Tub w/2", 3" & 4" High Pressure& Suction Hoses

_______ _______ _______2 A 293 (2-36) 7'6"W x 29"H x 34'L Pipe

Tub w/WASHINGTON Air Bowl,(2) Elevator Links, Mud Hopper,Misc

_______ _______ _______2 A 294 (2-37) 7'6"W x 29"H x 34'L Pipe

Tub w/Safety Mats, 4" & 3" HighPressure & Suction Hoses

_______ _______ _______2 A 295 (2-38) (3) 8'W x 30'L & 40'L Rig

Mats w/Wood Center


64



FORUM CATWALK/SKIDDING SYSTEM

_______ _______ _______3 M 296 (3-100) FORUM 2500 Hyd

Catwalk, S/N-25SP0215173558FM965, w/18'6"to 21' Reach, 47H x 8'W x 56'6"L,19'L V-Door, (4) Swingout PipeRacks, (4) Hyd Leveling Jacks,Hyd Pump p/b 100HP ElecMotor, Operator Controls,Skidded (12 Meter Test Hours,UNUSED)

_______ _______ _______3 M 297 FORUM WR-80 Hyd Floor

Ruffneck, S/N-801000215175640FM028, w/2.87"to 10" Pipe Range OperatorControls (NEW)

_______ _______ _______15 A 298 (15-41) Rig Skidding System,

Consisting of (10) 12"H I-Beams& Cross Beams, Hyd ControlStation, (2) Hyd Cyls, HPU p/b40HP Elec Motor


Consisting of (14) 12"H I-Beams& Cross Beams, Festoon Rails,(2) Hyd Cyls w/Jaws, HPU p/b40HP Elec Motor

65




Consisting of (14) 12"H I-Beams& Cross Beams, (4) Hyd Cyls, (2)w/Jaws, HPU p/b 40HP ElecMotor, Festoon Rails


Consisting of (12) 12"H I-Beams& Cross Beams, (2) Hyd Cylsw/Jaws, HPU p/b 40HP ElecMotor & 8'W x 40'L Rig Mat

_______ _______ _______1 A 302 Festoon Drag Chain Elec Cord

Handling System w/Elec Cable &Air Hoses, Elec Panel w/SkidRails & Skidded

_______ _______ _______4 A 303 (4-44) Festoon Drag Chain Elec

Cord Handling System w/ElecCable & Air Hoses, Elec Panelw/Skid Rails & Skidded

_______ _______ _______1 A 304 HPU p/b 40HP Elec Motor

w/Hoses & Elec Cord

_______ _______ _______1 A 305 NOV C-195-100 Torque

Converter (REBUILT)

66



WELL CONTROL EQUIP

_______ _______ _______3 H 306 (3-123) (5) COLFLEX 1-1/2" x 96"

& 122"L Steel Flex BOP Lines,7500# Test w/5000# WorkingPressure (With Certs)

_______ _______ _______4 A 307 (4-77) HYDRIL GK 13-5/8" 5000#

Annular Blowout Preventerw/Flanged Bottom & StuddedTop






Preventer, Flanged Bottom &Studded Top


Preventer, Flanged Bottom &Studded Top

_______ _______ _______15 A 312 (15-46) HYDRIL GK-10-5000 11"

5000# Spherical BlowoutPreventer w/Flanged Bottom &Studded Top

67



_______ _______ _______15 A 313 (15-47) 11" 5000# Spherical

Blowout Preventer w/FlangedBottom & Studded Top


Preventer w/Flanged Bottom &Studded Top

_______ _______ _______1 A 315 11" 5000# Spherical Blowout


_______ _______ _______1 A 316 11" 5000# Spherical Blowout


_______ _______ _______1 A 317 13-5/8" 5000# Dbl Ram Blowout

Preventer w/Studded Top &Bottom

_______ _______ _______1 A 318 TOWNSEND 13-5/8" 5000# Dbl

Ram Blowout Preventer w/4-1/2"Pipe & Blind Rams, Studded Top& Bottom

_______ _______ _______1 A 319 SHAFFER 11" 5000# Dbl Ram

Blowout Preventer w/4-1/2" Pipe& Blind Rams, Studded Top &Bottom

_______ _______ _______1 A 320 CAMERON Type U 13-5/8" 5000#

Dbl Ram Blowout Preventerw/Studded Top & Bottom

68



_______ _______ _______4 A 321 (4-78) SHANGHAI 13-5/8" 5000#

Dbl Ram Blowout Preventer w/5"Pipe & Blind Rams, Studded Top& Bottom

_______ _______ _______1 A 322 T3 6012 Diamond 13-5/8" 5000#

Sgl Ram Blowout Preventerw/Flanged Bottom & StuddedTop

_______ _______ _______15 A 323 (15-42) SSPE 13-5/8" 5000# Dbl

Ram Blowout Preventer(Disassembled), w/Dbl BlowoutPreventer Body & Palletw/Bonnets & End Caps

_______ _______ _______15 A 324 (15-43) 13-5/8" 5000# Dbl Ram

Blowout Preventer w/5" & BlindRams, Flanged Top & Bottom

_______ _______ _______15 A 325 (15-44) 11" 5000# Dbl Ram

Blowout Preventer w/FlangedTop & Bottom

_______ _______ _______15 A 326 (15-45) 11" 5000# Dbl Ram

Blowout Preventer(Disassembled) w/(2) BoxesBOP Rams & Parts

_______ _______ _______4 A 327 (4-79) 13-5/8" x 23"H 5000#

Drilling Spool w/4-1/16" Outlets

_______ _______ _______1 A 328 (2) 11" x 24"H 5000# Drilling

Spools w/4-1/16" Outlets

69



_______ _______ _______1 A 329 (2) 5000# Drilling Spools, (1) 11"

x 24"H w/4-1/16" Outlets & (1)11" x 36"H w/4-1/16" & 2-1/16"Outlets

_______ _______ _______1 A 330 (2) Drilling Spools, (1) 11" x

24"H 5000# w/4-1/16" Outlets &(1) 11" x 19"H 3000# w/4-1/16" &2-1/16" Outlets

_______ _______ _______1 A 331 13-5/8" x 24"H 5000# Drilling

Spool w/4-1/16" Outlets, 4-1/16"HCR & Manual Valves, (2) 2-1/16" Manual Valves & CheckValve

_______ _______ _______1 A 332 13-5/8" x 25-1/2"H 5000# Drilling

Spool w/(2) 4-1/16" Outlets, 2-1/16" Adapter

_______ _______ _______1 A 333 13-5/8" x 24"H 5000# Drilling

Spool w/4-1/16" & 2-1/16"Outlets

_______ _______ _______1 A 334 13-5/8" x 31-1/2"H 5000# Drilling

Spool w/(2) 4-1/16" & 2-1/16"Outlets, 2-1/16" Manual Valve

_______ _______ _______1 A 335 13-5/8" x 14"H 5000# Spacer

Spool

_______ _______ _______1 A 336 (2) 5000# Spacer Spools, (1) 11"

x 36"H & (1) 13-5/8" x 11" x 18"H

70



_______ _______ _______1 A 337 (2) 5000# Spacer Spools, (1) 11"

x 17"H & (1) 13-5/8" x 11" x 16"H

_______ _______ _______1 A 338 (2) 5000# Spacer Spools, (1) 11"

x 18"H & (1) 11" x 8"H

_______ _______ _______1 A 339 (2) Spacer Spools, (1) 13-5/8" x

11" x 12"H 3000/2000# & (1) 13-5/8" x 77"H 5000# w/Sliding Ring

_______ _______ _______1 A 340 11" x 35-1/2"H 5000# Spacer

Spool


w/(8) 10-Gal Bottles, TriplexPump p/b 20HP Elec Motor, AirPump, Skidded, Mtd in 8'W x20'L Crimped Steel Utility Housew/Storage Cabinets, Elec Heat &Lights, Skidded

_______ _______ _______1 A 343 10,000# Choke Manifold w/(2) 4-

1/8" & (8) 3-1/16" Manual Valves,(2) 3-1/16" Chokes, (1) Hyd

_______ _______ _______1 A 344 5000# Choke Manifold w/(3) 4-

1/16" & (6) 2-1/16" ManualValves, (1) Manual Choke, On9'W x 15'L Raiseable Skid

_______ _______ _______1 A 345 5000# Choke Manifold w/(2) 4-

1/16" & (4) 2-1/16" ManualValves, (1) Manual Choke

71



_______ _______ _______3 M 346 (3-155) (3) 2-1/16" 5000# Manual

& (1) 2-1/16" Hyd Valves, (1) 2-1/16" Check Valve, Mud Bucket& (2) Turnbuckles

_______ _______ _______1 A 347 (15) Well Control Valves,

Consisting of (4) 4-1/16" HCRValves, (4) 4-1/16" ManualValves, (2) 2-1/16" ManualValves, 3-1/8" & 2-1/16" DartValves, 2-1/16" Check Valve &(2) 2-1/16" DSAs

_______ _______ _______1 A 348 (2) Pallets of (1) 4-1/16" HCR

Valve, (2) 4-1/16" Manual Valves,(1) 2-1/16" Manual Valve, 2-1/16"Check Valves & Misc

_______ _______ _______1 A 349 48"Dia x 15'L Gas Buster, on

9'W x 30'L Skid

_______ _______ _______1 A 350 60"Dia x 20'L Gas Buster,

Skidded

_______ _______ _______1 A 351 6'W x 17'L 3-Stump BOP

Transport Skid

_______ _______ _______1 A 352 6'W x 17'L 3-Stump BOP

Transport Skid

_______ _______ _______1 A 353 5'W x 12'L 2-Stump BOP

Transport Skid, INGERSOLLRAND Chain Hoist

72



_______ _______ _______1 A 354 9'W x 16'L 2-Stump BOP

Transport Skid

_______ _______ _______1 A 355 (2) INGERSOLL RAND 20-Ton

BOP Trolley Rollers, (5)INGERSOLL RAND, TRACTEL &CM 20-Ton Chain Hoists

_______ _______ _______1 A 356 (4) Pallets of (3) 11" & (1) 13-5/8"

5000# Elements, Type 70 RamElements, 4-1/2" Rams & Misc

_______ _______ _______1 A 357 13-5/8" 5000# Nitrile Element

(UNUSED)

_______ _______ _______1 A 358 (3) Pallets of Type 70 Ram

Rubbers, 5" Blind Rams, 5" & 4-1/2" Pipe Rams & Misc

_______ _______ _______1 A 359 (4) Pallets of Type 70 5000# &

3000# Ram Rubbers, 11" 5000#Face Seals, (3) Closing Unit AirPumps & MI SWACO 10KPressure Operator Console

73



MUD PUMPS/TANKS

_______ _______ _______1 A 360 2011 TFI F-1600 Triplex Pump,

S/N-RS11003, w/Forged SteelFluid Ends & Quick ChangeCaps, K-20 5000# PulsationDampener, OTECO 3" ShearRelief Valve, Type D PressureGauge, Suction Screen,MISSION 6" x 5" Charging Pump& Rod Oiler Pump, Both BeltDriven, Bullwheel, Skidded

_______ _______ _______1 A 361 TFI F-1600 Triplex Pump

w/Forged Steel Fluid Ends &Quick Change Caps, K-20 5000#Pulsation Dampener, OTECO 3"Shear Relief Valve, Type DPressure Gauge, SuctionScreen, MISSION 6" x 5"Charging Pump, Belt Driven,Bullwheel, Skidded

_______ _______ _______1 A 362 2010 TFI F-1300 Triplex Pump,

S/N-201002, w/Forged SteelFluid Ends & Quick ChangeCaps, K-20 5000# PulsationDampener, OTECO 3" ShearRelief Valve, Type D PressureGauge, Suction Screen,MISSION 6" x 5" ChargingPump, Belt Driven, Bullwheel,Skidded

74



_______ _______ _______1 A 363 TFI F-1600 Triplex Pump

w/Forged Steel Fluid Ends &Quick Change Caps, K-20 5000#Pulsation Dampener, OTECO 3"Shear Relief Valve, Type DPressure Gauge, SuctionScreen, MISSION 6" x 5"Charging Pump & Rod OilerPump, Both Belt Driven,Bullwheel, Skidded

_______ _______ _______3 M 364 (3-112) Mud System Package,

Lots 365 thru 369

_______ _______ _______3 M 365 (3-113) 5'H x 10'W x 35'L

Crimped Steel 310-Bbl SuctionTank w/15'L Covered Porch, (2)MISSION 6" x 5" Cent Pumps, Eap/b 75HP Elec Motor, Hopper, (3)MAX2000 Agitators, Ea p/b 10HPElec Motor, (3) Compartments,Internal Plumbing, Top-MtdWalkways, Covered Roofs,Safety Rails, Caustic Tank,Skidded

_______ _______ _______3 M 366 (3-114) 5'H x 10'W x 39'L

Crimped Steel 350-Bbl ShakerTank w/10'L Covered Porch, (2)MISSION 6" x 5" Cent Pumps, Eap/b 75HP Elec Motor, MAX2000Agitator p/b 10HP Elec Motor, (2)Compartments, InternalPlumbing, Top-Mtd Walkways,Covered Roofs, Safety Rails,Skidded, Shaker Skid & Pit RoofTransport Skid

75



_______ _______ _______3 M 367 (3-115) MI SWACO Mongoose

Shale Shaker

_______ _______ _______3 M 368 (3-116) MI SWACO Mongoose

Shale Shaker

_______ _______ _______3 M 369 (3-117) 7'10"W x 20'L Mud House

w/Bench, Shelves, Lights, PumpParts, Eye Wash Station, ElecHeat, 5'L Junk Box w/MISSION6" x 5" Cent Pump, Stairs, TopSafety Rails, Skidded

_______ _______ _______1 A 370 WESTERN OILFIELD Vacuum

Degasser w/PNV Vacuum Pumpp/b 15HP Elec Motor, ElecStarter Box, Skidded

76



GENERATORS/ENGINES

_______ _______ _______19 C 372 SCR Package, Lots 373 thru 376

_______ _______ _______19 C 373 (19-1) GE 8000 3-Bay SCR House

w/(3) MGM 3-PhaseTransformers, (1) 750 KVA, (1)30 KVA & (1) 150 KVA, (2) A/CUnits, Breaker Boxes, Lights,Skidded

_______ _______ _______19 C 374 (19-2) CAT 800KW Gen Set, S/N-

83822, p/b CAT 398 Diesel Eng,S/N-66B08826 (00695 MeteredHours) w/QUINCY 3900 RB AirCompressor, Skidded

_______ _______ _______19 C 375 (19-3) CAT 800KW Gen Set, S/N-

8579316, p/b CAT 398 DieselEng, S/N-066B07599 (15,152Metered Hours) w/QUINCY 5126Air Compressor, Skidded

_______ _______ _______19 C 376 (19-4) CAT 800KW Gen Set, S/N-

79641, p/b CAT 398 Diesel Eng,S/N-66B6877 (02107 MeteredHours), QUINCY QSI 245 AirCompressor, Skidded

_______ _______ _______1 A 377 KATO 800KW AC Gen p/b CAT

3508 Diesel Eng, S/N-2HW00281,w/Air Starter, Radiator, GaugePanel

77



_______ _______ _______1 A 378 CAT SR-4B 750KW AC Gen p/b

CAT 3412 Diesel Eng w/ElecStarter, Radiator, MURPHYGauge Panel, Skidded

_______ _______ _______1 A 380 2007 CAT 3508 900HP Diesel

Eng, S/N-LLE00178, w/ElecStarter

_______ _______ _______1 A 381 2014 GLOBAL Heat Exchanger

w/Fan Guard

_______ _______ _______1 A 382 CAT C-15 Radiator, AKG Oil

Cooler & Misc

_______ _______ _______1 A 383 (5) Pallets Consisting of CAT C-

15 Eng Parts, Exhaust Parts &Misc

_______ _______ _______1 A 384 (6) Pallets Consisting of CAT

Eng Parts, Fan Blades, Belts,Exhaust Parts & Misc

_______ _______ _______1 A 385 (12) 12-Volt Elec Starters, (14) 24

& 12-Volt Alternators

_______ _______ _______1 A 386 (18) 24 & 12-Volt Elec Starters &

Alternators

_______ _______ _______1 A 387 (17) 24 & 12-Volt Elec Starters &

Alternators

78



_______ _______ _______1 A 388 (14) 24 & 12-Volt Alternators

_______ _______ _______1 A 389 (9) Air Starters (6 UNUSED)

DRILL PIPE/COLLARS

_______ _______ _______2 A 390 (1085) Ft (35 Jts) (2-95) 5", S-

135, 19.50#, Rng 2 BN Drill Pipew/4-1/2"IF Conn, HB, 6-3/8"ODAvg Box (YB)

_______ _______ _______4 A 391 (682) Ft (22 Jts) 5", S-135,

19.50#, Rng 2 BN Drill Pipe w/4-1/2"IF Conn, HB, 6-1/2"OD AvgBox (YB & RB)

79



(On The Following 6 Lots, Call BeforePickup)

_______ _______ _______1 A 392 (4216) Ft (136 Jts) 4-1/2", G-105,

16.60#, Rng 2 BN Drill Pipe w/4-1/2"XH Conn, HB, 6-3/16"OD AvgBox (DWB)

_______ _______ _______1 A 393 (4464) Ft (144 Jts) 4-1/2", G-105,


_______ _______ _______1 A 394 (4278) Ft (138 Jts) 4-1/2", G-105,


_______ _______ _______1 A 395 (4216) Ft (136 Jts) 4-1/2", G-105,

16.60#, Rng 2 BN Drill Pipe w/4-1/2"XH Conn, HB, 6"OD Avg Box(DWB)

_______ _______ _______1 A 396 (1798) Ft (58 Jts) 4-1/2", G-105,


_______ _______ _______1 A 397 (1240) Ft (40 Jts) 4-1/2", G-105,


80



_______ _______ _______1 A 398 (12) Upright Pipe Stands (Note:

Call Before Pickup)

(The Following 2 Lots Are First Come,First Served. No Picking Or Choosing)

_______ _______ _______4 N 398

A(3999) Ft (129 Jts) 4-1/2", MixedGrade, 16.60#, Rng 2 BN DrillPipe w/4-1/2"XH Conn, HB, 6-3/16"OD Avg Box (DWB)

_______ _______ _______4 N 398

B(3968) Ft (128 Jts) 4-1/2", MixedGrade, 16.60#, Rng 2 BN DrillPipe w/4-1/2"XH Conn, HB, 6-1/8"OD Avg Box (DWB)

_______ _______ _______4 A 398

C(806) Ft (26 Jts) (4-115) 4", MixedGrade, 14.00#, Rng 2 BN DrillPipe w/4"IF Conn, HB

_______ _______ _______10 E 399 (10-1) (1) Jt 5" Conv HWDP w/4-

1/2"IF, BN Tool Jts, HB, 6-1/2"OD x 23"L Avg Tool Joints(DWB, No Papers)

_______ _______ _______10 E 400 (10-2) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 401 (10-3) (1) Jt 5" Conv HWDP w/4-


81



_______ _______ _______10 E 402 (10-4) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 403 (10-5) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 404 (10-6) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 405 (10-7) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 406 (10-8) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 407 (10-9) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 408 (10-10) (1) Jt 5" Conv HWDP w/4-


82



_______ _______ _______10 E 409 (10-11) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 410 (10-12) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 411 (10-13) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 412 (10-14) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 413 (10-15) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 414 (10-16) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 415 (10-17) (1) Jt 5" Conv HWDP w/4-


83



_______ _______ _______10 E 416 (10-18) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 417 (10-19) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 418 (10-20) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 419 (10-21) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 420 (10-22) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 421 (10-23) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 422 (10-24) (1) Jt 5" Conv HWDP w/4-


84



_______ _______ _______10 E 423 (10-25) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 424 (10-26) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 425 (10-27) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 426 (10-28) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 427 (10-29) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 428 (10-30) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 429 (10-31) (1) Jt 5" Conv HWDP w/4-


85



_______ _______ _______10 E 430 (10-32) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 431 (10-33) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 432 (10-34) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 433 (10-35) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 434 (10-36) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 435 (10-37) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 436 (10-38) (1) Jt 5" Conv HWDP w/4-


86



_______ _______ _______10 E 437 (10-39) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 438 (10-40) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 439 (10-41) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 440 (10-42) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 441 (10-43) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______10 E 442 (10-44) (1) Jt 5" Conv HWDP w/4-


_______ _______ _______3 H 443 (3-108) 9-7/16"OD x 3-1/16"ID x

28.01'L Spiral Drill Collar w/7-5/8"Reg Conn, SR, HB

87



_______ _______ _______3 H 444 (3-109) 9-1/2"OD x 3-1/16"ID x

28.12'L Spiral Drill Collar w/7-5/8"Reg Conn, SR, HB

_______ _______ _______3 H 445 (3-110) 7-15/16"OD x 2-7/8"ID x

29.25'L Spiral Drill Collar w/6-5/8"Reg Conn, SR

_______ _______ _______3 H 446 (3-111) 7-7/8"OD x 2-7/8"ID x

29.30'L Spiral Drill Collar w/6-5/8"Reg Conn, SR

_______ _______ _______1 A 447 8-1/8"OD x 2-7/8"ID x 30.65'L

Drill Collar w/6-5/8"Reg Conn,SR, HB

_______ _______ _______1 A 448 8-1/8"OD x 2-7/8"ID x 30.99'L

Drill Collar w/6-5/8"Reg Conn,SR, HB

_______ _______ _______1 A 449 7-5/8"OD x 2-7/8"ID x 30.81'L

Drill Collar w/6-5/8"Reg Conn

_______ _______ _______1 A 450 7-5/8"OD x 2-7/8"ID x 27.49'L


_______ _______ _______1 A 451 7-5/8"OD x 2-7/8"ID x 30.30'L


_______ _______ _______1 A 452 7-1/2"OD x 2-7/8"ID x 27.59'L

Drill Collar w/6-5/8"Reg Conn,HB

88



_______ _______ _______1 A 453 8"OD x 2-7/8"ID x 30.85'L BHC

w/6-5/8"Reg Conn, SR

_______ _______ _______4 A 454 (4-150) 7-7/8"OD x 2-3/4"ID x

30.36'L Slick Drill Collar w/6-5/8"Reg Conn, SR, HB

_______ _______ _______4 A 455 (4-151) 8"OD x 2-3/4"ID x 30.32'L

Slick Drill Collar w/6-5/8"RegConn, SR, HB

_______ _______ _______2 A 456 (2-133) 7-7/8"OD x 2-3/4"ID x


_______ _______ _______2 A 457 (2-134) 7-7/8"OD x 3-15/16"ID x

28.90'L Slick Drill Collar w/6-5/8"Reg Conn, SR

_______ _______ _______2 A 458 (2-135) 7-7/8"OD x 2-1/4"ID x


_______ _______ _______1 A 459 6-1/4"OD x 2-3/8"ID x 30.68'L

Drill Collar w/NC-46 Conn, SR

_______ _______ _______1 A 460 6-1/4"OD x 2-5/16"ID x 31.12'L

Drill Collar w/NC-46 Conn, SR,HB

_______ _______ _______1 A 461 6-3/8"OD x 2-5/16"ID x 30.47'L

Drill Collar w/4-1/2" H-90 Conn,SR, HB

89



_______ _______ _______1 A 462 5-15/16"OD x 2-5/16"ID x 31.16'L


_______ _______ _______1 A 463 6-3/8"OD x 2-5/16"ID x 30.49'L


_______ _______ _______1 A 464 6-11/16"OD x 2-3/8"ID x 30.46'L

Drill Collar w/4-1/2"IF Conn, SR,HB

_______ _______ _______1 A 465 6-3/16"OD x 2-5/16"ID x 30.24'L

Drill Collar w/4-1/2" H-90 Conn,SR

_______ _______ _______1 A 466 6-7/16"OD x 2-3/8"ID x 30.87'L


_______ _______ _______1 A 467 6-1/2"OD x 2-5/16"ID x 31.18'L


_______ _______ _______1 A 468 6-3/8"OD x 2-5/16"ID x 30.54'L


_______ _______ _______1 A 469 6-1/16"OD x 2-5/16"ID x 30.47'L


90



_______ _______ _______1 A 470 6-1/2"OD x 2-5/16"ID x 30.14'L


_______ _______ _______1 A 471 6-1/4"OD x 2-5/16"ID x 30.56'L


_______ _______ _______1 A 472 6-3/8"OD x 2-5/16"ID x 31.13'L


_______ _______ _______1 A 473 6-1/4"OD x 2-5/16"ID x 30.57'L


_______ _______ _______1 A 474 6-5/16"OD x 2-3/8"ID x 30.13'L


_______ _______ _______1 A 475 6-1/2"OD x 2-3/8"ID x 29.14'L


_______ _______ _______1 A 476 6-1/4"OD x 2-3/8"ID x 31.13'L


_______ _______ _______1 A 477 6-5/16"OD x 2-3/8"ID x 30.96'L


91



_______ _______ _______1 A 478 6-1/2"OD x 2-5/16"ID x 31.08'L


_______ _______ _______1 A 479 6-3/8"OD x 2-5/16"ID x 30.67'L


_______ _______ _______1 A 480 6-5/8"OD x 2-7/16"ID x 28.74'L


_______ _______ _______1 A 481 6-9/16"OD x 2-7/16"ID x 29.04'L


_______ _______ _______1 A 482 6-1/4"OD x 2-5/16"ID x 31.13'L


_______ _______ _______1 A 483 6-1/16"OD x 2-1/2"ID x 29.47'L


_______ _______ _______1 A 484 6-1/4"OD x 2-1/2"ID x 29.41'L


_______ _______ _______1 A 485 6-5/8"OD x 2-3/8"ID x 30.43'L


92



_______ _______ _______1 A 486 6-9/16"OD x 2-1/2"ID x 29.26'L


_______ _______ _______1 A 487 6-3/8"OD x 2-5/16"ID x 31.17'L


_______ _______ _______1 A 488 6-1/4"OD x 2-5/16"ID x 31.18'L


_______ _______ _______1 A 489 6-1/4"OD x 2-5/16"ID x 31.22'L


_______ _______ _______1 A 490 6-1/4"OD x 2-5/16"ID x 30.89'L


_______ _______ _______1 A 491 6-1/4"OD x 2-5/16"ID x 31.14'L


_______ _______ _______1 A 492 6-5/16"OD x 2-5/16"ID x 31.14'L


_______ _______ _______1 A 493 6-5/16"OD x 2-5/16"ID x 31.16'L


93



_______ _______ _______1 A 494 6-1/4"OD x 2-5/16"ID x 30.86'L


_______ _______ _______1 A 495 6-1/4"OD x 2-5/16"ID x 31.14'L


_______ _______ _______1 A 496 6-7/16"OD x 2-5/16"ID x 30.47'L


_______ _______ _______1 A 497 6-5/16"OD x 2-5/16"ID x 31.15'L


_______ _______ _______1 A 498 6-1/2"OD x 2-1/4"ID x 31.23'L


_______ _______ _______1 A 499 6-1/2"OD x 2-1/4"ID x 31.21'L


_______ _______ _______1 A 500 6-1/2"OD x 2-1/4"ID x 30.97'L


_______ _______ _______1 A 501 6-1/4"OD x 2-1/4"ID x 29.94'L


94



_______ _______ _______1 A 502 6-3/8"OD x 2-1/4"ID x 31.25'L


_______ _______ _______1 A 503 6-5/8"OD x 2-1/4"ID x 31.34'L


_______ _______ _______1 A 504 6-1/2"OD x 2-1/4"ID x 31.56'L


_______ _______ _______1 A 505 6-1/4"OD x 2-1/4"ID x 30.49'L


_______ _______ _______1 A 506 6-1/2"OD x 2-1/4"ID x 31.47'L


_______ _______ _______1 A 507 6-1/2"OD x 2-1/4"ID x 31.47'L


_______ _______ _______1 A 508 6-1/2"OD x 2-1/4"ID x 31.50'L


_______ _______ _______1 A 509 6-1/4"OD x 2-1/4"ID x 30.41'L


95



_______ _______ _______1 A 510 6-1/4"OD x 2-1/4"ID x 29.78'L


_______ _______ _______1 A 511 6-1/4"OD x 2-1/4"ID x 30.60'L


_______ _______ _______1 A 512 6-1/4"OD x 2-1/4"ID x 30.54'L


_______ _______ _______1 A 513 6-1/2"OD x 2-1/4"ID x 30.91'L


_______ _______ _______1 A 514 6-1/2"OD x 2-1/4"ID x 30.87'L


_______ _______ _______1 A 515 6-1/2"OD x 2-1/4"ID x 31.51'L


_______ _______ _______1 A 516 6-1/2"OD x 2-1/4"ID x 31.47'L


_______ _______ _______1 A 517 6"OD x 2-3/4"ID x 30.04'L Drill

Collar w/NC-46 Conn, SR, HB

_______ _______ _______1 A 518 7"OD x 2-5/16"ID x 30.45'L Drill

Collar w/4-1/2"IF Conn, SR, HB

96



_______ _______ _______1 A 519 6-1/4"OD x 2-3/8"ID x 30.59'L


_______ _______ _______1 A 520 6"OD x 2-3/8"ID x 30.55'L Drill

Collar w/NC-46 Conn, SR

_______ _______ _______1 A 521 6-3/8"OD x 2-3/8"ID x 30.52'L


_______ _______ _______1 A 522 6-3/8"OD x 2-5/16"ID x 30.74'L


_______ _______ _______1 A 523 6-3/8"OD x 2-5/16"ID x 30.47'L


_______ _______ _______1 A 524 6-1/4"OD x 2-3/8"ID x 30.19'L


_______ _______ _______1 A 525 6-1/8"OD x 2-1/4"ID x 30.00'L


_______ _______ _______2 A 526 (2-100) 6-3/8"OD x 2-1/4"ID x

29.90'L Slick Drill Collar w/H-90Conn, SR, HB

_______ _______ _______2 A 527 (2-101) 6-1/2"OD x 2-1/4"ID x


97



_______ _______ _______2 A 528 (2-102) 6-5/8"OD x 2-1/4"ID x


_______ _______ _______2 A 529 (2-103) 6-3/8"OD x 2-1/4"ID x

28.55'L Spiral Drill Collar w/H-90Conn, SR, HB

_______ _______ _______2 A 530 (2-104) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______2 A 531 (2-105) 6-1/2"OD x 2-1/4"ID x

29.92'L Slick Drill Collar w/H-90Conn, SR

_______ _______ _______2 A 532 (2-106) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______2 A 533 (2-107) 6-1/2"OD x 2-1/4"ID x


_______ _______ _______2 A 534 (2-108) 6-5/16"OD x 2-5/16"ID x


_______ _______ _______2 A 535 (2-109) 6-5/16"OD x 2-5/16"ID x


98



_______ _______ _______2 A 536 (2-110) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______2 A 537 (2-111) 6-3/8"OD x 2-5/16"ID x

30.15'L Spiral Drill Collar w/H-90Conn, SR

_______ _______ _______2 A 538 (2-112) 6-5/16"OD x 2-1/4"ID x

29.10'L Spiral Drill Collar w/H-90Conn, SR, HB

_______ _______ _______2 A 539 (2-113) 6-1/2"OD x 2-5/16"ID x


_______ _______ _______2 A 540 (2-114) 6-7/16"OD x 2-1/4"ID x


_______ _______ _______2 A 541 (2-115) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______2 A 542 (2-116) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______2 A 543 (2-117) 6-3/8"OD x 2-5/16"ID x


99



_______ _______ _______2 A 544 (2-118) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______2 A 545 (2-119) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______2 A 546 (2-120) 6-7/16"OD x 2-1/4"ID x


_______ _______ _______2 A 547 (2-121) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______2 A 548 (2-122) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______2 A 549 (2-123) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______2 A 550 (2-124) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______2 A 551 (2-125) 6-3/8"OD x 2-1/4"ID x


100



_______ _______ _______2 A 552 (2-126) 6-7/16"OD x 2-1/4"ID x


_______ _______ _______2 A 553 (2-127) 6-7/16"OD x 2-1/4"ID x


_______ _______ _______2 A 554 (2-128) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______2 A 555 (2-129) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______2 A 556 (2-130) 6-7/16"OD x 2-1/4"ID x


_______ _______ _______2 A 557 (2-131) 6-7/16"OD x 2-1/4"ID x


_______ _______ _______2 A 558 (2-132) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 559 (4-152) 6-3/8"OD x 2-1/4"ID x

30.53'L Slick Drill Collar w/4-1/2"XH Conn, SR

101



_______ _______ _______4 A 560 (4-153) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______4 A 561 (4-154) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______4 A 562 (4-155) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______4 A 563 (4-156) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 564 (4-157) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______4 A 565 (4-158) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______4 A 566 (4-159) 6-7/16"OD x 2-1/4"ID x


_______ _______ _______4 A 567 (4-160) 6-5/16"OD x 2-1/4"ID x


102



_______ _______ _______4 A 568 (4-161) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 569 (4-162) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______4 A 570 (4-163) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______4 A 571 (4-164) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______4 A 572 (4-165) 6-5/16"OD x 2-1/4"ID x


_______ _______ _______4 A 573 (4-166) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 574 (4-167) 6-5/16"OD x 2-1/4"ID x

30.08'L Slick Drill Collar w/4-1/2"XH Conn, SR, HB

_______ _______ _______4 A 575 (4-168) 6-1/4"OD x 2-1/4"ID x


103



_______ _______ _______4 A 576 (4-169) 6-1/2"OD x 2-1/4"ID x


_______ _______ _______4 A 577 (4-170) 6-1/8"OD x 2-1/4"ID x


_______ _______ _______4 A 578 (4-171) 6-5/16"OD x 2-1/4"ID x

30.78'L Slick Drill Collar w/4-1/2"XH Conn

_______ _______ _______4 A 579 (4-172) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 580 (4-173) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 581 (4-174) 6-3/16"OD x 2-1/4"ID x


_______ _______ _______4 A 582 (4-175) 6-7/16"OD x 2-1/4"ID x


_______ _______ _______4 A 583 (4-176) 6-1/4"OD x 2-1/4"ID x


104



_______ _______ _______4 A 584 (4-177) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______4 A 585 (4-178) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 586 (4-179) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______4 A 587 (4-180) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 588 (4-181) 6-1/2"OD x 2-1/4"ID x


_______ _______ _______4 A 589 (4-182) 6-1/2"OD x 2-1/4"ID x


_______ _______ _______4 A 590 (4-183) 6-1/2"OD x 2-1/4"ID x


_______ _______ _______4 A 591 (4-184) 6-3/4"OD x 2-1/4"ID x


105



_______ _______ _______4 A 592 (4-185) 6"OD x 2-1/4"ID x 29.98'L

Slick Drill Collar w/4-1/2"XHConn, SR

_______ _______ _______4 A 593 (4-186) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 594 (4-187) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 595 (4-188) 6-1/8"OD x 2-1/4"ID x


_______ _______ _______4 A 596 (4-189) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______4 A 597 (4-190) 6-3/8"OD x 2-1/4"ID x


_______ _______ _______4 A 598 (4-191) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______4 A 599 (4-192) 6-1/2"Od x 2-1/4"ID x


106



_______ _______ _______4 A 600 (4-193) 6"OD x 2-1/4"ID x 28.55'L

Slick Drill Collar w/4-1/2"XHConn, SR, HB

_______ _______ _______4 A 601 (4-194) 6"OD x 2-1/4"ID x 28.90'L


_______ _______ _______4 A 602 (4-92) 6-1/16"OD x 2-3/8"ID x


_______ _______ _______4 A 603 (4-93) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______4 A 604 (4-94) 6-1/4"OD x 2-3/8"ID x


_______ _______ _______4 A 605 (4-95) 6-1/4"OD x 2-5/16"ID x


_______ _______ _______4 A 606 (4-96) 6-1/4"OD x 2-5/16"ID x


_______ _______ _______4 A 607 (4-97) 6-1/4"OD x 2-3/8"ID x


107



_______ _______ _______4 A 608 (4-98) 6-1/2"OD x 2-3/8"ID x


_______ _______ _______4 A 609 (4-99) 6"OD x 2-5/16/"ID x


_______ _______ _______4 A 610 (4-100) 6-1/4"OD x 2-3/8"ID x


_______ _______ _______4 A 611 (4-101) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______4 A 612 (4-102) 6-1/4"OD x 2-5/16"ID x


_______ _______ _______4 A 613 (4-103) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______4 A 614 (4-104) 6"OD x 2-1/4"ID x 30.00'L


_______ _______ _______4 A 615 (4-105) 6"OD x 2-1/4"ID x 29.45'L


108



_______ _______ _______4 A 616 (4-106) 6"OD x 2-1/8"ID x 30.10'L


_______ _______ _______4 A 617 (4-107) 6"OD x 2-3/16"ID x


_______ _______ _______4 A 618 (4-108) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______4 A 619 (4-109) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______4 A 620 (4-110) 6-1/4"OD x 2-3/8"ID x


_______ _______ _______4 A 621 (4-111) 6"OD x 2-1/4"ID x 30.00'L


_______ _______ _______4 A 622 (4-112) 6"OD x 2-1/4"ID x 30.90'L


_______ _______ _______4 A 623 (4-113) 6-1/16"OD x 2-1/4"ID x


109



_______ _______ _______4 A 624 (4-114) 6-1/4"OD x 2-5/16"ID x


_______ _______ _______14 A 625 (14-87) (3) Slick Drill Collars w/6-

5/8"Reg Conn, SR, HB:7-3/4"OD x 2-15/16"ID x 28.54'L,7-7/8"OD x 3"ID x 27.55'L & 7-3/4"OD x 2-7/16"ID x 28.30'L

_______ _______ _______14 A 626 (14-88) (7) Slick Drill Collars w/4-

1/2"XH Conn, SR, HB:6-1/4"OD x 2-5/16"ID x 29.98'L, 6-3/8"OD x 2-5/16"ID x 29.85'L, 6-3/8"OD x 2-5/16"ID x 29.55'L, 6-3/8"OD x 2-5/16"ID x 30.85'L, 6-1/4"OD x 2-5/16"ID x 30.25'L, 6-5/16"OD x 2-5/16"ID x 30.35'L &6-3/8"OD x 2-5/16"ID x 30.10'L

_______ _______ _______14 A 627 (14-89) (14) Spiral Drill Collars

w/4-1/2"XH Conn, SR:6-5/16"OD x 2-3/8"ID x 30.00'L, 6-5/16"OD x 2-3/8"ID x 30.40'L, 6-5/16"OD x 2-3/8"ID x 30.51'L, 6-1/4"OD x 2-7/16"ID x 30.22'L, 6-1/4"OD x 2-7/16"ID x 30.05'L, 6-5/16"OD x 2-3/8"ID x 30.32'L, 6-1/4"OD x 2-3/8"ID x 30.28'L, 6-5/16"OD x 2-3/8"ID x 30.18'L, 6-1/4"OD x 2-3/8"ID x 30.40'L, 6-5/16"OD x 2-3/8"ID x 30.22'L, 6-1/4"OD x 2-5/16"ID x 29.50'L, 6-1/4"OD x 2-3/8"ID x 30.80'L, 6-1/4"OD x 2-3/8"ID x 30.20'L & 6-5/16"OD x 2-3/8"ID x 31.40'L

110



_______ _______ _______15 A 628 (15-48) (9) Spiral Drill Collars

w/4-1/2"IF Conn:6-3/8"OD x 2-5/16"ID x 28.85'L,SR, 6-3/8"OD x 2-5/16"ID x29.19'L, SR, HB, 6-3/8"OD x 2-5/16"ID x 29.30'L, SR, 6-3/8"OD x2-5/16"ID x 30.50'L, SR, 6-3/8"ODx 2-5/16"ID x 30.07'L, SR, 6-3/8"OD x 2-5/16"ID x 30.25'L, SR,6-3/8"OD x 2-5/16"ID x 29.30'L,SR, 6-3/8"OD x 2-5/16"ID x29.70'L, SR, HB & 6-3/8"OD x 2-5/16"ID x 29.90'L, SR, HB

111



PIPE RACKS/TUBS

_______ _______ _______15 A 629 (15-49) (2) 18"H x 28'L Pipe

Racks

_______ _______ _______14 A 630 (14-90) (2) 27"H x 22'L Triangular

Pipe Racks

_______ _______ _______14 A 631 (14-91) (2) 38"H x 27'L Triangular

Pipe Racks

_______ _______ _______14 A 632 (14-92) (3) 45"H x 25'L Triangular

Pipe Racks

_______ _______ _______14 A 633 (14-93) (2) 38"H x 27'L Triangular

Pipe Racks

_______ _______ _______14 A 634 (14-94) (2) 37"H x 28'L Triangular

Pipe Racks

_______ _______ _______14 A 635 (14-95) (2) 28"H x 28'L Triangular

Pipe Racks

_______ _______ _______14 A 636 (14-96) (2) 43"H x 28'L Triangular

Pipe Racks

_______ _______ _______14 A 637 (14-97) (3) 28'L Triangular Pipe

Racks, (2) 41"H & (1) 17"H

_______ _______ _______14 A 638 (14-98) (2) 42"H x 28'L Triangular

Pipe Racks

112



_______ _______ _______2 A 639 (2-87) (2) 44"H x 30'L Triangular

Pipe Racks

_______ _______ _______2 A 640 (2-88) (3) 19"H x 30'L Triangular

Pipe Racks (Note: Call BeforePickup)

_______ _______ _______2 A 641 (2-89) (3) 19"H x 30'L Triangular

Pipe Racks

_______ _______ _______2 A 642 (2-90) (2) 44"H x 28'L Triangular

Pipe Racks

_______ _______ _______2 A 643 (2-39) (6) 44"H x 28'L Triangular

Pipe Racks

_______ _______ _______2 A 644 (2-40) (4) Upright Pipe Rack

Stands


Stands


Stands


Stands

_______ _______ _______1 A 648 (2) 48"H x 24'L Sq Tubing

Triangular Pipe Racks

113



_______ _______ _______1 A 649 (2) 42"H x 25'L Tubular


_______ _______ _______1 A 650 (2) 44"H x 25'L Tubular


_______ _______ _______1 A 651 (1) 42"H x 28'L & (1) 42"H x 25'L

Tubular Triangular Pipe Racks

_______ _______ _______1 A 652 (1) 42"H x 29'L, (1) 36"H x 26'L &

(1) 36"H x 25'L TubularTriangular Pipe Racks

_______ _______ _______1 A 653 (2) 28"H x 26'L Tubular

Triangular Pipe Racks (Note:Call Before Loadout Due to DrillCollars on Them)

_______ _______ _______1 A 654 (2) 36"H x 28'L Tubular

Triangular Pipe Racks (Note:Call Before Loadout Due to DrillCollars on Them)

_______ _______ _______2 A 655 (2-91) (2) 44"H x 28'L Triangular

Pipe Racks

_______ _______ _______2 A 656 (2-92) (2) 43"H x 28'L Triangular

Pipe Racks

_______ _______ _______2 A 657 (2-93) (2) 43"H x 28'L Triangular

Pipe Racks

114




_______ _______ _______4 A 659 (4-116) (2) 43"H x 28'L Triangular

Pipe Racks (Note: UnderCollarsO0

_______ _______ _______4 A 660 (4-117) (2) 46"H x 28'L Triangular

Pipe Racks

_______ _______ _______4 A 661 (4-118) (2) 46"H x 28'L Triangular

Pipe Racks


_______ _______ _______1 A 663 (4) 8'H x 8'W Vertical Pipe Racks

_______ _______ _______1 A 664 (2) 8'H x 8'W & (2) 6'H x 8'W

Vertical Pipe Racks

_______ _______ _______1 A 665 (3) 8'H x 8 'W Vertical Pipe

Racks


Racks


Racks

_______ _______ _______1 A 668 (2) 8'H x 8'W & (2) 6'H x 8'W

Vertical Pipe Racks

115





_______ _______ _______1 A 671 8'W x 2'H x 32'L Pipe Tub

w/(127) Crossover Subs, VariousConn

_______ _______ _______1 A 672 8'W x 2'H x 32'L Pipe Tub w/Wire

Rope

_______ _______ _______1 A 673 8'W x 2'H x 32'L Pipe Tub

_______ _______ _______1 A 674 8'W x 2'H x 32'L Pipe Tub

_______ _______ _______1 A 675 8'W x 2'H x 32'L Pipe Tub

_______ _______ _______1 A 676 8'W x 2'H x 32'L Pipe Tub w/Wire

Rope & Iron

_______ _______ _______1 A 677 8'W x 2'H x 32'L Pipe Tub

_______ _______ _______1 A 678 8'W x 2'H x 32'L Pipe Tub

116



TRAVELING/HANDLING EQUIP

_______ _______ _______3 H 680 (3-119) NOV YG170 170-Ton

Shorty Block/Hook Combo w/(5)36"Dia Sheaves f/1-1/4" Line(NEW)

_______ _______ _______1 A 681 SKYTOP BREWSTER 250-Ton

Block/Hook Combo w/(5) 40"DiaSheaves

_______ _______ _______1 A 682 CONTINENTAL EMSCO 250-Ton

Block w/WEB WILSON Hook, (5)38"Dia Sheaves

_______ _______ _______3 H 683 (3-122) (2) 2-3/4" x 109"L

Elevator Links

_______ _______ _______1 A 684 (2) 3" x 96" 250-Ton Elevator

Bails

_______ _______ _______1 A 685 (2) 3" x 84" 250-Ton Elevator

Bails

_______ _______ _______1 A 686 (2) 3" x 84" 250-Ton Elevator

Bails

_______ _______ _______1 A 687 (2) 3-3/4" x 132" 350-Ton

Elevator Bails

_______ _______ _______1 A 688 (2) 3" x 96" 250-Ton Elevator

Bails

117



_______ _______ _______1 A 689 (2) 3-3/4" x 108" 350-Ton

Elevator Bails

_______ _______ _______1 A 690 OILWORKS Pipe Spinner

_______ _______ _______3 M 691 (3-144) Air Operated Pipe

Spinner w/Hanger

_______ _______ _______3 H 692 (3-121) BJ J-29 Hawk Pipe

Spinner w/Hanger, 3-1/2" to 8"Catch

_______ _______ _______3 H 693 (3-131) (2) Type B Rotary Tongs

(UNUSED)

_______ _______ _______3 H 694 (3-132) (8) Type B Tong Heads, 3-

1/2" to 13-3/8", 2 & 3 Jaw

_______ _______ _______3 M 695 (3-133) (2) Type B Rotary Tongs

(REBUILT)


(REBUILT)

_______ _______ _______3 M 697 (3-135) (2) Type WWB Rotary

Tongs w/(1) Hanger


_______ _______ _______3 M 699 (3-137) (3) Type MB Rotary

Tongs

118



_______ _______ _______3 M 700 (3-138) (2) Type WWB Rotary

Tongs w/Various Heads

_______ _______ _______3 M 701 (3-139) (4) Rotary Tongs, (3)

Type B & (1) HT

_______ _______ _______3 M 702 (3-140) (17) Tong Heads, Jaws &

Latches

_______ _______ _______3 M 703 (3-141) (19) Tong Heads, Jaws &

Latches

_______ _______ _______3 M 704 (3-142) (21) Tong Heads, Jaws &

Latches

_______ _______ _______3 M 705 (3-143) (11) Rotary Tong

Hangers

_______ _______ _______1 A 706 (2) WOOLLEY TOOL Type B

Rotary Tongs w/Heads & LiftingArm

_______ _______ _______1 A 707 (2) WOOLLEY TOOL Type B

Rotary Tongs w/Heads & LiftingArm

_______ _______ _______1 A 708 FOLELY Type B Rotary Tong &

Various Size Rotary TongHeads, All in Metal ShippingBasket

119



_______ _______ _______3 H 709 (3-124) RT 350-Ton 5" BN CL

Elevator

_______ _______ _______3 H 710 (3-125) AOT RG 175-Ton 4-1/2"

BN CL Elevator (UNUSED)

_______ _______ _______3 H 711 (3-126) AOT RG 175-Ton 4-1/2"

BN CL Elevator (UNUSED)

_______ _______ _______3 H 712 (3-127) AOT RG 175-Ton 4" BN

CL Elevator (UNUSED)

_______ _______ _______3 H 713 (3-128) AOT RG 175-Ton 4" BN

CL Elevator (UNUSED)

_______ _______ _______1 A 714 BJ 4-1/2" 250-Ton CL Drill Pipe

Elevator

_______ _______ _______1 A 715 WTM 5" 250-Ton CL Drill Pipe

Elevator

_______ _______ _______1 A 716 RT 5-1/2" 250-Ton CL Drill Pipe

Elevator

_______ _______ _______1 A 717 RT 5" 250-Ton CL Drill Pipe

Elevator

_______ _______ _______1 A 718 MGG 5" 250-Ton CL Drill Pipe

Elevator

_______ _______ _______1 A 719 RT 5" 250-ton CL Drill Pipe

Elevator

120



_______ _______ _______1 A 720 RT 4-1/2" 250-Ton CL Drill Pipe

Elevator (UNUSED)

_______ _______ _______1 A 721 MGG 5" 250-Ton CL Drill Pipe

Elevator

_______ _______ _______1 A 722 RT 5" 250-Ton CL Drill Pipe

Elevator

_______ _______ _______1 A 723 RT SLX 7" 150-Ton SD Casing

Elevator

_______ _______ _______1 A 724 RT SLX 8-3/4" 150-Ton SD

Casing Elevator

_______ _______ _______1 A 725 AOT 7" 65-Ton SD Casing

Elevator

_______ _______ _______1 A 726 AOT 7" 65-Ton SD Casing

Elevator

_______ _______ _______3 M 727 (3-145) BV 250-Ton 5" BN CL

Elevator

_______ _______ _______3 M 728 (3-146) BJ MGG 250-Ton 4-1/2"

BN CL Elevator

_______ _______ _______3 M 729 (3-147) BJ 7" SD Casing Elevator

_______ _______ _______3 M 730 (3-148) (6) Casing Bowls, (1) w/8-

5/8" Slips, (2) 7" 5000 Flanges &(10) Slip Segs

121



_______ _______ _______3 M 731 (3-149) (2) SDML & SDL Drill

Pipe Slips, Dressed 4-1/2"

_______ _______ _______3 M 732 (3-150) (3) BAASH ROSS &

WOOLLEY Slips

_______ _______ _______3 M 733 (3-151) (5) BAASH ROSS &

WOOLLEY Slips

_______ _______ _______3 M 734 (3-152) (4) BAASH ROSS &

WOOLLEY Slips

_______ _______ _______3 M 735 (3-153) (4) Drill Collar Slips, (2)

12-Seg, (1) 10-Seg & (1) 8-Seg

_______ _______ _______3 M 736 (3-154) (2) Drill Collar Slips, (1)

WOOLLEY Dressed 5-1/2" & (1)7-Seg

_______ _______ _______1 A 737 2012 BLOHM & VOSS PSH-150

Hyd Power Slip

_______ _______ _______1 A 738 2012 BLOHM & VOSS PSH-150

Hyd Power Slip

_______ _______ _______3 H 739 (3-129) VARCO 5" x 5" SDXL

Drill Pipe Slips

_______ _______ _______3 H 740 (3-130) VARCO 5" x 5" SDXL

Drill Pipe Slips

122



_______ _______ _______1 A 741 (1) RT XLS 5" Drill Collar Slips &

(1) Type A 8-1/4" x 10" 9-SegCasing Slips

_______ _______ _______1 A 742 (1) RT 8-5/8" 10-Seg Casing

Slips & (1) RT 8-5/8" 10-SegCasing Slips

123



RIG HOUSES

_______ _______ _______1 A 743 ATCO 12'W x 40'L Rig Manager's

House w/Living, Office, Bath &Bed Area, Climate Controlled,Skidded

_______ _______ _______1 A 744 AMERI-TECH 10'4"W x 50'L Rig

Manager's House w/Living,Office, Bath & Bed Area, ClimateControlled, Skidded

_______ _______ _______1 A 745 AMERI-TECH 10'4"W x 50'L Rig

Manager's House w/Living,Office, Bath & Bed Area, ClimateControlled, Skidded

_______ _______ _______4 N 745

AAMERI-TECH 10'5"W x 40'L RigManager's House w/Office,Living, Kitchen, Bed, BathAreas, Climate Controlled,Skidded (Note: Left Side WoodWall Replacement)

_______ _______ _______4 N 745

BAMERI-TECH 10'3"W x 40'L RigManager's House w/Office,Living, Kitchen, Bed, BathAreas, Climate Controlled,Skidded

_______ _______ _______1 A 746 8'W x 40'L Shipping Container


124






w/Disassembled Shelves


w/Shelves & Cabinets


w/Shelves


_______ _______ _______7 A 755 (7-5) 8'W x 9'H x 20'L Conex

Container w/Safety Training &Safety Equipment & Supplies,Including (2) Full Size HumanDummies, (4) MSA RespiratorMasks & Bottles w/Case, (3)MILLER "Mighty Lite" SelfExtracting Lifelines, TSI RopeRescue Kits, Manlift Harnesses,One-Man "Heli-Gurney", (3) 6'Folding Tables, Parts & Supplies

_______ _______ _______1 A 756 8'W x 20'L Crimped Steel Parts

House w/Parts Cabinets, PaintCabinets, Bolt Bins, CAT Filters,Rig Lights & Misc, Skidded

125



_______ _______ _______1 A 757 8'W x 38'L Crimped Steel 2-

Room Change House w/Lockers,Benches, SQUARE D 45 KVATransformer, Skidded

_______ _______ _______1 A 758 8'W x 20'L Crimped Steel

Shipping Containerw/Disassembled Shelving

_______ _______ _______1 A 759 Cooling Trailer w/PORT-A-COOL

Elec Cooling Unit, Mtd on 2011TIGER T/A Trailer, VIN-5UTBU1626BM001970, w/325-Gal Fresh Water Tank, Benches,Covered Roof, Bumper Pull, 15"Tires(NOTE: BILL OF SALE ONLY)

_______ _______ _______1 A 760 7'8"W x 5'L Shower House,

Skidded

_______ _______ _______1 A 761 7'10"W x 8'L Shower House

w/Elec Heat, Skidded

_______ _______ _______1 A 762 7'8"W x 5'L Shower House

w/Shower, Water Tank,GRUNDFOS 1" Elec Pump,Skidded

_______ _______ _______1 A 763 8'W x 8'L Shower House

w/Water Tank & Shower,Skidded

126



_______ _______ _______1 A 764 8'W x 8'L Shower House

w/Water Tank & Shower,Skidded

_______ _______ _______1 A 765 7'9"W x 30'L Parts House

w/Shelves & Cabinet, WorkBench, Filters, Hammer Unions,Misc, Elec Heat & Lights,Skidded

_______ _______ _______1 A 766 QUINCY 390 & 325 Air

Compressors

127



DRILLING COMPONENTS

_______ _______ _______1 A 767 (2) Mud Pump Clutch Drive

Shafts, (1) w/Clutch Ring, (1)w/16-Groove Belt Sheaves & (2)Pillow Blocks (2 Pallets)

_______ _______ _______1 A 768 Mud Pump Clutch Drive Shaft

w/16-Belt Groove Sheave &Pillow Block, (3) EATON24CB500 Dbl Clutches & TripleSprocket Drive w/Clutch Ring (3Pallets)

_______ _______ _______1 A 769 (5) Pallets Mud Pump Parts,

Consisting of (2) F-1600 FluidModules, Type D PressureGauge, Swabs, Pistons, Valves,Seats, Packing, Gaskets & Misc

_______ _______ _______1 A 770 (5) Pallets Mud Pump Parts,

Consisting of (40) Liners, (10)Pony Rods, Seats, Valves,Pistons & Misc

_______ _______ _______1 A 771 (4) 5000# & (1) 3000# Pulsation

Dampener Bladders (UNUSED),BOP Ring Gaskets & MudBucket Rubbers (2 Pallets)

_______ _______ _______1 A 772 (3) Pallets of (10) EATON

24CB500, 36CB250 Air Clutches(Most UNUSED)

128



_______ _______ _______1 A 773 (3) Pallets of (5) EATON

26CB525, 37VC650, 14CB400 AirClutches, TWIN DISC ClutchPlates & Misc Disc (MostUNUSED)

_______ _______ _______1 A 774 (6) Pallets of EATON, (1)

32CB525, (2) 16CB500, (2)20A500, (2) 32VC100 AirClutches & Misc TWIN DISCClutch Plates (Some UNUSED)

_______ _______ _______1 A 775 EATON 326 Disc Water Cooled

Brake (REBUILT)

_______ _______ _______1 A 776 (3) Pallets of OWI Brake

Flanges, (4) Brake Bands, BrakeBlocks

_______ _______ _______1 A 777 (4) Pallets of (3) 30"Dia & (1)

42"Dia Sheaves, Misc Bearings& Grease Seals, Drwwks, Shafts& Gears

_______ _______ _______1 A 778 (6) Pallets of Sgl, Dbl, Triple,

Quad, 5 & 6 Link Roller Chain &(4) Sprockets

_______ _______ _______1 A 779 (6) Pallets of (22) Elec Motors,

(3) 2" x 2" Transfer Pumps p/bElec Motors

_______ _______ _______1 A 780 (1) Crate of DODGE & REXNORD

Pillow Block Bearings

129



_______ _______ _______1 A 781 (9) A1 & (1) B1 Sureshots

w/Clocks

_______ _______ _______1 A 782 (4) Pallets of OWI Brake

Linkage, Hose Fittings, GateValve Parts, Gaskets, Shims,Drive Couplings, Hyd Parts, ElecParts, Hydromatic Plates,Jackshaft & Misc

_______ _______ _______1 A 783 (2) BALDOR 48" 12-8V

Bullwheels, (2) BALDOR 8-1/2"QD Hubs & (2) 8V Belts (AllUNUSED)

_______ _______ _______1 A 784 (3) 5000# Pulsation Dampeners,

Pump Fluid Ends, Crossheadf/FB-1600 Pump, (2) CrossheadSlides f/FB-1600 Pump & MiscPump Parts

_______ _______ _______1 A 785 FIVE STAR Elec/Hyd Wireline

Unit, Skidded


Unit


Unit

_______ _______ _______1 A 788 (13) RUFFNECK Heat Exchanger

Heaters (8 UNUSED)

130




Heaters (3 UNUSED)


Heaters (5 UNUSED)


Heaters (3 UNUSED)

_______ _______ _______1 A 792 (3) Pallets Consisting of (24)

Crossover Subs, (4) Lift Subs &Inside BOPs


Crossover Subs, (7) Lift Subs,(3) Kelly Valves & (2) InsideBOPs


Crossover Subs, (14) Lift Subs,(1) Inside BOP, (1) Kelly Valve &(10) Pin Type Lift Subs

_______ _______ _______1 A 795 42"H x 56"W x 56'L 2-Section

Catwalk

_______ _______ _______1 A 796 (18) Steel Rig Mats

131



_______ _______ _______7 A 797 (7-6) Lot Consisting of (4) 8"H x

8'W x 40'L Steel Frame WoodMatting Boards, (2) 5'H x 13'LGuard Rails, Crown Block w/(5)36" & (1) 52" Sheaves, A-FrameMast Stand f/Mobile Rigs, 8'H x8'W x 8'L Steel Work Platform,Ladder, 3'6" Guard Rails on TopFloor

END DAY ONE

132

BIDDING TERMS/CONDITIONS

1. Bidder RegistrationAll Bidders must register and receive a bidder number at each Superior Energy Auctioneers’ auction. Anyone bidding on behalf of a third party MUST register and will be held responsible and liable for all purchases. No bids should be placed on any item you own or on behalf of any owner. Only the highest bidder will be able to purchase any item placed for auction by the Auctioneer. Superior Energy Auctioneers has the right to deny anyone a bidder number and may also retract bidding privileges for any reason at any time. Any information about a Buyer is confidential.

2. Payment TermsAll purchases are to be “PAID IN FULL” in negotiable U.S. Funds within (2) business days from the end of the final sale day. Company or Personal Checks, Cashier’s Checks or Wire Transfers are the only acceptable forms of payment. Bank wires and company or personal checks will be accompanied by a “BANK LETTER OF GUARANTEE” guaranteeing payment. The Buyer waives the right to stop payment on any check or wire transfer given as payment. No cash, drafts, credit cards or ACH payments will be accepted. The Buyer may receive their equipment purchases upon completion of payment (check-out information can be found on the inside cover of the auction catalog). The Auctioneer reserves the right to hold ALL equipment until ALL funds have cleared the Auctioneer’s Bank and to hold ALL equipment on any partial payment. A late fee may be assessed if payment is not received in full within (5) business days of receipt of your invoice.

3. Sales TaxSales Tax will be charged on all purchases, unless the Buyer provides the proper exemption documents required by the local Government Tax Agency where the assets are located. Buyer agrees to pay all applicable sales tax on all purchases, unless they meet the requirements mentioned above. Buyer also agrees to pay any sales tax that may be assessed after initial payment has been received. International Buyers must pay the sales tax as shown on your invoice. Proper documentation must be provided in a timely manner to assist in obtaining any sales tax refund.*See Bill of Lading Requirements on our website

4. Administrative FeesA 3% Administrative Fee will be charged on all purchases made at the official sale site location. There will be an additional 3% (total 6%) fee for Internet purchases*See Auction Brochure or website for details

5. Warranties or GuaranteesALL items are sold “AS IS, WHERE IS, WITH ALL FAULTS” without a warranty or guarantee of any kind, whether written, expressed or implied as to merchantability or fitness for a particular purpose. Any reference to year, make, model, serial number, condition or performance, lot numbering, and digital slides are provided as accurately as possible from sources believed to be reliable. The Buyer is wholly responsible to inspect items and accepts upon placement of a bid any item in its current condition with any and all faults or defects known or not known. Neither Superior Energy Auctioneers or the Seller shall be held liable for any defects or inaccuracies. Buyer specifically releases Auctioneers of any liability arising from the lack of merchantability or fitness of use or condition of any item purchased upon bid registration. All announcements on sale day take precedence over all printed material. Bidding on any item confirms that you have inspected the equipment and you know what you are bidding on.

6. Indemnification & Hold Harmless/Injury & DamagesThe auction site shall include any yard or location at which any lot is located as well as the location where the auction bidding is conducted. The Bidder and anyone associated with the Bidder agree to enter any site at their own risk. Bidders, Bidders party, Agents, employees or representatives agree to Hold Harmless and Indemnify Superior Energy Auctioneers, its employees, its agents, its representatives, its sellers and its site owners for any injury, damages or loss of life which may occur on an auction site or arising from an auction. The Buyer also agrees to the same terms for load-out and check-out on all auction sites, and if requested, buyer will provide applicable Certificate of Insurance prior to load-out.

7. Contested or Tie BidsIn the event two (2) or more Bidders claim the same lot after the Auctioneer has declared an item sold, the Auctioneer may re-open the sale of said item and allow bidding to continue between those Bidders until a high bidder is determined. The re-opening of any bid will be at the sole discretion of the Auctioneer, who may also decide not to re-open a bid if he feels a bid was late and the item was clearly sold. The Auctioneer may also refuse any bid he considers a mere fractional advance. The Auctioneer reserves the right to group, withdraw, create or break-apart any lot.

8. Resale of Merchandise/Abandoned MerchandiseThe Auctioneer reserves the right to reclaim any or all merchandise for any unpaid purchases in part or in full. In the event a Buyer chooses to resell a lot, they must make up any shortages from the initial sales price as well as pay any expenses, including but not limited to attorney fees, that result from equipment having to be resold. The resale of any merchandise is at the lone discretion of the Auctioneer. Any lots or equipment not picked up by any Buyer or left beyond the stated check-out period will be considered abandoned property and may be resold or otherwise disposed of by Auctioneer. Buyer specifically releases Auctioneer of any claim or liability arising from any equipment purchased and abandoned including without limitation, any claim for a refund or return of monies used to purchase abandoned equipment.

9. Titles/Bills of SaleFollowing collection of all money owed, Superior Energy Auctioneers will mail by USPS Certified Mail all titles and bills of sale to the Buyer within a reasonable time period following the auction.

10. Charges for Late Pickup of LotsAll purchases MUST BE removed during posted check-out period. Any lots or partial lots that are not claimed by the end of the check-out period will be considered abandoned and may be re-claimed and sold for storage costs at Superior’s discretion. The Auction Company, Seller or yard Owner are not at fault for any injury, damage or loss during or after the check-out period. Late pickup may result in a $25.00 per lot per day charge. A storage lien will incept on the first day after the expiration of the posted check-out period without notice.

11. Load-Out/Transportation DisclaimerNeither Superior or the Seller(s) are involved in any part of Load-Out or Transport. The responsibility of any load-out or transport arrangements and charges are the sole responsibility of the Buyer. Neither Superior or the Seller(s) should be considered the Shipper, Consignor or Consignee. Certificate of Insurance may be required prior to load-out.

12. AgreementThis Agreement is between the Bidder and the “Auctioneer” (Superior Energy Auctioneers) and shall be governed by and interpreted by the laws of the State of Texas. Venue for any dispute arising between Auctioneer and any Buyer, Bidder, Shipper, Consignor or Consignee or agent representing the same will be limited to Comal County, Texas and may be referred to Arbitration by either party prior to the filing of any suit or subsequent thereto. By registering for this auction, the Bidder understands and agrees to abide by all Terms and Conditions as stated herein.

Documents

PITTSBURGH, PA YARD LOCATIONS / CHECKOUT€¦ · 19/8/2019 · YARD #6 - PITTSBURGH, PA ADDRESS: American Made Systems 2600 Neville Rd, 15225 CHECKOUT: Thru August 21st (8-5) Mon-Fri