model no. page model no. page model no. pagemodel no. page model no. page

1

Raxofix with SC-Contur

Piping technology PE-Xc/Al/ PE-Xc/gunmetal

ZM_L3_int_en_20170410_112907_5.pdf 1 10.04.2017 12:35:26

2

Flow-optimised press connector system for drinking water installations in acc. with DIN  1988 and DIN  50930-6 as well as heating installations, tested in acc. with DVGW worksheet W  534. Press connectors Safe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drink-ing water installations and reduces the pipeline volume. SC-Contur All sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W  534, point 12.14, connectors with forced leakage. During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1  MPa–0.65  MPa, in the case of a dry leakage test with compressed air or noble gases from 22  hPa–0.3  MPa. Marking Green dot on the press connection Pipes Raxofix PE-Xc/Al/ PE-Xc

■ dimensionally stable, oxygen-proof in acc. with DIN  4726, grey

Raxofix PE-Xc ■ flexible, black

Dimensions Press connectors and pipes

■ Raxofix- PE-Xc/Al/ PE-Xc: d  16/20/25/32/40/50/63 ■ Raxofix PE-Xc: d  16/20

Areas of application PE-Xc/Al/ PE-Xc Drinking water Heating Rainwater Compressed air Areas of application PE-Xc Rainwater Drinking water Use of the system for application areas other than those described here must be agreed with Viega Service Center. Operating conditions Drinking water installations

■ Operating temperature max.  70  °C ■ Operating pressure max.  1.0  MPa

Heating installations ■ Operating temperature max.  80  °C ■ Operating pressure max.  1.0  MPa

Irrelevant of the direction of flow, mixed installations are permitted. Note The DVGW test mark is only valid for the use of original Viega parts – installation of non-Viega parts is not permitted. The pipes conform to the recommendations of KTW (Plastic in drinking water) of the German Federal Environmental Agency and the requirements of the DVGW worksheet W 270. Can be installed inaccessibly without restrictions in acc. with VOB-C, Point 3.2.7. Warranty and ZVSHK transferred liability agreement. Certification Raxofix PE-Xc/Al/ PE-Xc pipe and Raxofix PE-Xc pipe

■ DVGW-Reg.-No. DW-8501BU0124 Use of press tools

The functional safety of the Viega press connector systems is primarily dependent on the perfect condition of the press tools and press machines used. For this reason, for the production of press connections, we recommend the use of Viega press tools and their regular inspection by authorised service points. Technical data More extensive information and technical data can be found in the download area of the Viega homepage: viega.com

ZM_L3_int_en_20170410_112907_5.pdf 2 10.04.2017 12:35:26

3

Raxofix with SC-Contur L3

Elbows 4T-pieces 5Adapter pieces/adapter elbows 7Couplings 9Screw fittings 10Wall plates 11Mounting units 13Wall lead-ins 14Gunmetal shut-off valves 18Gunmetal ball valves 19Concealed free-flow valves, concealed straight seat

valves 20Cross T-pieces 21Radiator connections 21Skirting board radiator connection pieces 23Heating manifolds 24

AccessoriesMounting accessories 24

INDEX

GTIN-Code (Global Trade Item Number, previously EAN-Code) The GTIN-Code composed out of the constant manufacturer number 4015211 and a six-digit article code - in this example 305  611. The exchange of the last six digits against the article code shows the GTIN-Code.

L3

ZM_L3_int_en_20170410_112907_5.pdf 3 10.04.2017 12:35:26

4

Raxofi x Elbow  90° - gunmetal

Model  5316

article d Z L647 001 16 23 38647 018 20 24 39647 025 25 30 50647 032 32 36 56647 049 40 46 72647 056 50 55 82647 063 63 62 90

Raxofi x Elbow  45° - gunmetal

Model  5326

article d Z L647 070 25 25 45647 087 32 25 45647 094 40 30 56647 100 50 40 66647 117 63 45 74

ELBOWS

ZM_L3_int_en_20170410_112907_5.pdf 4 10.04.2017 12:35:27

5

Raxofi x with SC-Contur L3

Raxofi x T-piece - gunmetal

Model  5318

article d1 d2 d3 Z1 Z2 Z3 L1 L2 L3647 278 16 16 16 23 23 23 38 38 38647 285 16 20 16 24 24 24 39 39 39647 308 20 16 16 25 25 24 40 40 39647 315 20 16 20 24 25 24 39 40 39647 322 20 20 16 25 25 25 40 40 40647 292 20 20 20 25 25 25 40 40 40647 346 25 16 16 28 26 23 48 41 38647 353 25 16 20 30 26 24 50 41 39647 360 25 16 25 26 27 26 46 42 46647 377 25 20 20 29 27 24 49 42 39647 384 25 20 25 28 28 28 48 43 48647 391 25 25 16 30 30 27 50 50 42738 457 25 25 20 30 30 27 50 50 42647 339 25 25 25 30 30 30 50 50 50647 414 32 16 25 27 30 26 47 45 46647 421 32 16 32 27 32 27 47 47 47647 438 32 20 20 30 30 25 50 45 40647 445 32 20 32 30 30 30 50 45 50647 452 32 25 25 32 32 30 52 52 50647 469 32 25 32 33 33 33 53 53 53647 407 32 32 32 35 35 35 55 55 55647 483 40 20 40 32 38 32 58 53 58647 490 40 25 32 34 37 30 60 57 50647 506 40 25 40 35 40 35 62 60 62647 513 40 32 32 38 38 34 64 58 54647 520 40 32 40 38 38 38 64 58 64647 476 40 40 40 46 46 46 72 72 72647 544 50 25 50 40 45 40 66 65 66647 551 50 32 50 43 43 43 69 63 69647 568 50 40 50 47 47 47 74 74 74647 537 50 50 50 51 51 51 78 78 78647 582 63 25 63 41 50 41 70 70 70647 599 63 32 63 44 54 44 72 74 72647 605 63 40 63 47 53 47 76 80 76647 612 63 50 63 52 57 52 80 84 80647 575 63 63 63 62 62 62 90 90 90

L3

T-PIECES

ZM_L3_int_en_20170410_112907_5.pdf 5 10.04.2017 12:35:27

6

Raxofi x T-piece - gunmetal

Model  5317

article d1 Rp d2 Z1 Z2 Z3 L1 L2 L3647 124 16 ½ 16 29 5 29 44 20 44647 131 20 ½ 20 30 6 30 45 21 45647 148 25 ½ 25 33 8 33 53 23 53647 155 25 ¾ 25 35 9 35 55 25 55647 179 32 ¾ 32 35 12 35 55 28 55647 186 32 1 32 39 11 39 59 30 59647 193 40 ¾ 40 40 14 40 66 30 66647 223 50 1 50 47 18 47 74 37 74647 230 63 1 63 50 23 50 78 42 78

Raxofi x T-piece - gunmetal

Model  5326.4

article R d1 d2 Z1 Z2 L1 L2 L3 SS647 629 ½ 16 16 23 23 38 38 40 18647 636 ¾ 16 16 23 23 38 38 47 24647 643 ¾ 20 20 25 25 40 40 47 24SS =  spanner size

ZM_L3_int_en_20170410_112907_5.pdf 6 10.04.2017 12:35:28

7

Raxofi x with SC-Contur L3

Raxofi x Plug-in piece - gunmetal

Model  5313

article d1 d2 Z L646 554 16 15 36 51646 561 16 18 37 52646 578 20 18 36 50646 585 20 22 39 54646 592 25 22 40 60646 608 32 28 41 61646 615 40 35 47 74646 622 50 42 62 88

Raxofi x Adapter - gunmetal

Model  5313P

article d1 d2 Z L646 707 16 15 13 50646 714 16 18 14 51646 721 20 15 13 50646 738 20 18 14 50646 745 20 22 15 53646 752 25 22 16 59646 769 32 28 15 58646 776 40 28 21 71646 783 40 35 19 70646 790 50 35 24 76

Raxofi x Adapter - gunmetal

Model  5312

article d Rp Z L SS646 158 16 ½ 15 43 25646 165 16 ¾ 15 45 30646 172 20 ½ 14 43 25646 189 20 ¾ 15 44 30646 196 25 ¾ 17 52 30646 202 25 1 17 54 38646 219 32 1 17 54 38646 226 32 1¼ 17 57 47646 233 40 1¼ 23 69 47728 182 40 1½ 28 70 53646 240 50 1¼ 23 69 47646 257 50 1½ 24 70 53646 264 63 2 25 78 67SS =  spanner size

L3

ADAPTER PIECES/ADAPTER ELBOWS

ZM_L3_int_en_20170410_112907_5.pdf 7 10.04.2017 12:35:29

8

Raxofi x Adapter - gunmetal

Model  5311

article d R Z L SS725 563 16 ⅜ 29 44 18646 288 16 ½ 32 47 22646 295 16 ¾ 33 48 27646 301 20 ½ 34 49 22646 318 20 ¾ 33 48 28646 325 25 ¾ 35 54 28646 332 25 1 41 61 34646 349 32 1 41 61 34646 356 40 1¼ 51 78 43728 175 40 1½ 51 78 50646 363 50 1½ 52 78 50646 370 63 2 58 86 68SS =  spanner size

Raxofi x Adapter elbow  90° - gunmetal

Model  5314

article d R Z L1 L2 SS725 556 16 ⅜ 24 39 33 15645 984 16 ½ 24 39 37 18645 991 16 ¾ 22 37 43 23646 004 20 ½ 25 40 36 18646 011 20 ¾ 24 39 45 24646 028 25 ¾ 30 50 42 24646 035 25 1 31 51 56 30646 042 32 1 33 53 53 30646 059 40 1¼ 45 72 70 38SS =  spanner size

Raxofi x Adapter elbow  90° - gunmetal

Model  5314.11

article d Rp Z1 Z2 L1 L2 SS646 103 16 ½ 30 16 45 31 25646 110 20 ½ 30 17 45 32 25646 127 20 ¾ 32 21 47 37 31646 134 25 ¾ 35 23 55 39 31646 141 32 1 39 26 59 45 39SS =  spanner size

ZM_L3_int_en_20170410_112907_5.pdf 8 10.04.2017 12:35:30

9

Raxofi x with SC-Contur L3

Raxofi x Coupling - gunmetal

Model  5315

article d1 d2 Z L646 806 16 16 21 50646 820 20 16 22 52646 813 20 20 21 50646 844 25 16 26 60646 851 25 20 25 59646 837 25 25 25 64646 875 32 20 28 62646 882 32 25 28 67646 868 32 32 25 64646 905 40 32 31 77646 899 40 40 31 83646 929 50 40 41 93646 912 50 50 39 91646 943 63 50 43 98646 936 63 63 41 97

Raxofi x Adapter coupling - gunmetal

Model  5315.9

article d1 d2 Z L646 639 16 16 14 48646 653 20 20 14 50

Raxofi x Adapter - gunmetal

Model  5313.8

article d1 d2 Z L SS1 SS2712 341 16x2.2 16x2.2 30 61 19 30712 655 20x2.8 20x2.8 32 61 19 30SS =  spanner size

Raxofi x Repair coupling - gunmetal

Model  5315.3

article d Zmax Zmin Lmin Lmax692 445 16 121 84 114 150692 438 20 122 85 114 151646 950 25 154 104 143 193646 967 32 165 111 150 204646 974 40 206 136 188 258646 981 50 218 152 204 270646 998 63 240 164 220 296Zmax =  Z- dimension maximumZmin =  Z- dimension minimumLmin =  length minimumLmax =  length maximum

Raxofi x Adapter - gunmetal

Model  5313.5

article d Viega d F Z L SS1 SS2684 037 16x2.2 16x2 22 52 17 26d F =  d pipe from other manufacturerSS =  spanner size

L3

COUPLINGS

ZM_L3_int_en_20170410_112907_5.pdf 9 10.04.2017 12:35:31

10

Raxofi x Connection screw fi tting - gunmetal

Model  5363

article d G Z L1 L2 SS646 400 16 ½ 19 39 5 23646 417 16 ¾ 21 45 9 30646 424 20 ½ 25 47 7 24646 431 20 ¾ 23 46 9 30646 448 25 1 24 52 8 36646 455 25 1¼ 25 57 12 50646 462 25 1½ 27 56 10 52646 486 32 1¼ 29 61 12 50646 493 32 1½ 25 54 9 52646 509 40 1¼ 33 69 10 46646 516 40 1½ 28 64 9 52646 523 50 1¾ 33 69 10 60646 530 50 2⅜ 32 69 10 74646 547 63 2⅜ 31 70 10 74SS =  spanner size

Raxofi x Connection screw fi tting  90° - gunmetal

Model  5355

article d G Z1 Z2 L1 L2 SS646 387 16 ½ 23 24 38 30 24646 394 16 ¾ 23 33 38 41 30SS =  spanner size

Adapter nipple - gunmetal

Model  3246

article R G CP L SS449 339 ½ ½ 30 22441 524 ½ ¾ 20 27449 346 ¾ ¾ 33 28CP =  chrome-platedSS =  spanner size

Raxofi x Connection screw fi tting - gunmetal

Model  5329

article d G Z L SS647 865 16 ¾ 15 38 30647 872 20 ¾ 15 38 30SS =  spanner size

SCREW FITTINGS

ZM_L3_int_en_20170410_112907_5.pdf 10 10.04.2017 12:35:32

11

Raxofi x with SC-Contur L3Raxofi x Plug - brass

Model  5356

article d Z L648 015 16 15 30648 022 20 17 32648 039 25 21 41648 046 32 24 44648 053 40 32 58648 060 50 35 62

Raxofi x Wall plate - gunmetal

Model  5325.5

article d Rp Z1 Z2 L1 L2 L3 L4645 915 16 ½ 36 19 51 28 17 21645 922 20 ½ 36 19 51 28 17 21645 939 20 ¾ 38 19 53 29 17 21

Raxofi x Wall plate - gunmetal

Model  5325

article d Rp L Z1 Z2 L1 L2 L3 L4692 902 16 ½ 70 35 18 50 53 17 21

Raxofi x Double wall plate - gunmetal

Model  5325.7

article d1 Rp d2 Z1 Z2 Z3 L1 L2 L3 L4 L5 L6645 946 16 ½ 16 38 38 9 53 53 23 50 40 13645 953 20 ½ 16 42 42 9 57 57 23 50 40 16645 960 20 ½ 20 40 40 9 55 55 23 50 40 16678 470 25 ½ 20 52 57 14 72 72 28 50 40 11678 463 25 ½ 25 52 52 14 72 72 28 50 40 11

L3

WALL PLATES

ZM_L3_int_en_20170410_112907_5.pdf 11 10.04.2017 12:35:33

12

Raxofi x Wall plate T-piece - gunmetal

Model  5324.3

article d Rp Z1 Z2 L1 L2 L3 L4 k647 803 16 ½ 35 7 50 22 18 25 40647 810 20 ½ 35 7 50 22 20 25 40k =  bolt circle diameter

Raxofi x Wall plate - gunmetal

Model  5325.4

article d R Z L1 L2 L3 L4 L5 SS724 443 16 ½ 29 44 36 14 12 40 17724 450 20 ½ 29 44 36 14 12 40 17SS =  spanner size

Raxofi x Double wall plate - gunmetal

Model  5325.6

article d1 R d2 Z1 Z2 Z3 L1 L2 L3 L4 L5 L6 SS724 412 16 ½ 16 49 50 29 64 88 44 38 12 14 17724 429 20 ½ 20 49 50 29 64 88 44 38 12 16 17724 436 25 ½ 25 63 55 33 83 104 53 49 12 18 17SS =  spanner size

Raxofi x Wall plate T-piece - gunmetal

Model  5325.8

article d1 Rp d2 Z1 Z2 Z3 L1 L2 L3647 698 16 ½ 16 28 5 28 43 20 43647 704 20 ½ 20 29 6 29 44 21 44647 711 20 ¾ 20 32 6 32 47 22 47

ZM_L3_int_en_20170410_112907_5.pdf 12 10.04.2017 12:35:34

13

Raxofi x with SC-Contur L3

Raxofi x Mounting unit - galvanised steel

Model  5323

article d Rp Z1 Z2 L1 L2 L3 L4 L5 L6 L7645 977 16 ½ 36 19 51 28 22 40 135 175 205

Raxofi x Mounting unit - galvanised steel

Model  5321.61

article d Rp DG Z1 Z2 L1 L2 L3 L4 L5690 144 16 ½ 80/100/150 36 19 51 28 17 144 216DG =  depth gauge

Raxofi x Mounting unit - galvanised steel

Model  5321.71

article d Rp DG Z1 Z2 L1 L2 L3 L4 L5 L6660 659 16 ½ 70/100/150 36 19 51 28 21 40 300 340DG =  depth gauge

Raxofi x Mounting unit - galvanised steel

Model  5321.81

article d Rp DG Z1 Z2 L1 L2 L3 L4 L5 L6 L7684 020 16 ½ 150 36 19 51 28 23 84 37 40 40DG =  depth gauge

L3

MOUNTING UNITS

ZM_L3_int_en_20170410_112907_5.pdf 13 10.04.2017 12:35:35

14

Mounting bracket - galvanised steel

Model  2021.7

article DG L1 L2 L3 L4 L5 L6 L7 M651 350 70/100/150 370 234 48 40 300 340 40 4DG =  depth gaugeM =  thread type

Mounting bracket - galvanised steel

Model  2141.3

article DG L1 L2 L3 L4 L5 M581 701 80–150 253 28 15 228 40 6DG =  depth gaugeM =  thread type

Mounting bracket - galvanised steel

Model  2141.4

article L1 L2 L3 L4 L5 M586 706 140 58 43 24 23 6M =  thread type

Raxofi x Double wall lead-in - gunmetal

Model  5332.81

article d Rp G L Z1 Z2 L1 L2 L3647 735 16 ½ ¾ 25 27 30 42 45 20

WALL LEAD-INS

ZM_L3_int_en_20170410_112907_5.pdf 14 10.04.2017 12:35:36

15

Raxofi x with SC-Contur L3Raxofi x Wall lead-in - gunmetal

Model  5332.11

article d Rp G L Z1 Z2 L1 L2 L3647 759 16 ½ ¾ 18 27 23 42 38 20647 766 16 ½ ¾ 25 27 30 42 45 20647 773 16 ½ ¾ 35 27 30 42 55 20647 780 16 ½ ¾ 55 27 45 42 75 20

Raxofi x Wall lead-in - gunmetal

Model  5332.31

article d Rp G Z L647 797 16 ½ ¾ 33 68

Wall lead-in - gunmetal

Model  2132.9

article Rp G L L1 L2 SS G1470 913 ½ ¾ 120 108 40 12 1/2SS =  spanner size

Mounting set Model  1526. 414-897

article G SS D104 887 ¾ 29 49SS =  spanner sizeD =  external diameter

Manifold - gunmetal

Model  2005.7

article G n Z1 Z2 Z3 L1 L2107 161 ¾ 1 20 32 29 72104 658 ¾ 2 20 32 29 60 132106 027 ¾ 3 20 32 29 60 192

L3

ZM_L3_int_en_20170410_112907_5.pdf 15 10.04.2017 12:35:37

16

Raxofi x Manifold - gunmetal

Model  5326.05

article d G n Z1 Z2 Z3 L1 L2 L3645 595 16 ¾ 4 30 30 34 50 45 197

Raxofi x Manifold - gunmetal

Model  5326.07

article d G n Z1 Z2 Z3 L1 L2645 601 16 ¾ 3 30 30 34 50 45

Raxofi x Manifold - gunmetal

Model  5326.06

article d G n Z1 Z2 Z3 L1 L2 L3645 618 16 ¾ 2 25 30 29 50 45 114

Raxofi x Cross piece - gunmetal

Model  5318.9

article R d Z1 Z2 L1 L2 L3 SS647 650 ½ 16 23 23 38 38 40 18SS =  spanner size

Raxofi x Manifold - gunmetal

Model  5326.08

article d G n Z1 Z2 Z3 L1 L2 L3 SS645 625 16 ¾ 3 26 25 28 41 40 36 30SS =  spanner size

ZM_L3_int_en_20170410_112907_5.pdf 16 10.04.2017 12:35:38

17

Raxofi x with SC-Contur L3Raxofi x Manifold - gunmetal

Model  5326.09

article d G n Z1 Z2 Z3 Z4 L1 L2 L3 L4 L5 SS645 632 16 ¾ 5 22 22 28 26 37 37 36 41 50 30SS =  spanner size

Raxofi x Extension piece - gunmetal

Model  5326.31

article R d Z L1 L2 L3647 674 ½ 16 22 37 30 50

Raxofi x Extension piece - gunmetal

Model  5326.32

article d1 d2 Z L1 L2 L3647 681 15 16 22 37 39 50

L3

ZM_L3_int_en_20170410_112907_5.pdf 17 10.04.2017 12:35:39

18

Easytop Slanted seat valve Model  5337

article DN d Z1 Z2 L1 L2 L3 H1 H2 Ø G SS649 296 15 16 25 51 40 66 19 82 17 55 1/4 19649 302 15 20 25 53 40 68 17 82 17 55 1/4 19649 319 20 25 28 61 48 81 18 94 20 55 1/4 19649 326 25 32 37 80 57 100 19 114 23 70 1/4 27649 333 32 40 40 90 66 116 20 130 27 70 1/4 27649 340 40 50 49 96 76 122 37 152 29 90 1/4 36649 357 50 63 55 115 84 144 42 175 36 90 1/4 41Ø =  diameterSS =  spanner size

Easytop CRV slanted seat valve Model  5338

article DN d Z1 Z2 L1 L2 L3 H1 H2 Ø G SS649 364 15 16 25 51 40 66 15 78 18 55 1/4 19649 371 15 20 25 53 40 68 14 79 18 55 1/4 19649 388 20 25 28 61 48 81 14 91 21 55 1/4 19649 395 25 32 33 77 53 97 15 110 24 70 1/4 27649 401 32 40 40 90 66 116 16 125 27 70 1/4 27649 418 40 50 44 96 70 122 33 148 30 90 1/4 36649 425 50 63 47 118 76 146 36 170 37 90 1/4 41Ø =  diameterSS =  spanner size

Easytop Slanted seat valve, Basic Model  5337.09

article DN d Z1 Z2 L1 L2 L3 H1 H2 Ø G SS649 524* 20 25 28 61 48 81 18 93 21 55 1/4 19649 548* 32 40 40 90 66 116 20 130 28 70 1/4 27649 555* 40 50 44 96 70 122 37 152 31 90 1/4 36649 562* 50 63 47 118 76 146 39 175 38 90 1/4 41Ø =  diameterSS =  spanner size* =  Discontinued, limited availability

GUNMETAL SHUT-OFF VALVES

ZM_L3_int_en_20170410_112907_5.pdf 18 10.04.2017 12:35:40

19

Raxofi x with SC-Contur L3Easytop CRV slanted seat valve, Basic Model  5338.09

article DN d Z1 Z2 L1 L2 L3 H1 H2 Ø G SS649 579* 15 16 25 51 40 66 15 78 20 55 1/4 19649 593* 20 25 28 61 48 81 14 89 23 55 1/4 19649 609* 25 32 33 77 53 97 18 110 26 70 1/4 27649 616* 32 40 40 90 66 116 16 126 29 70 1/4 27649 623* 40 50 44 96 70 122 33 148 32 90 1/4 36649 630* 50 63 47 118 76 146 33 170 38 90 1/4 41Ø =  diameterSS =  spanner size* =  Discontinued, limited availability

Easytop Backfl ow preventer Model  5339

article DN d Z1 Z2 L1 L2 H1 H2 G SS649 432 15 16 25 51 40 66 40 18 1/4 19649 449 15 20 25 53 40 68 40 18 1/4 19649 456 20 25 28 61 48 81 47 21 1/4 25649 463 25 32 33 77 53 97 57 24 1/4 30649 470 32 40 40 90 66 116 69 27 1/4 36649 487 40 50 44 96 70 122 81 30 1/4 36649 494 50 63 47 118 76 146 92 37 1/4 41SS =  spanner size

Easytop Ball valve Model  5370

article DN d Z1 Z2 L1 L2 L3 H1 H2649 715 15 16 32 38 47 52 98 72 17649 722 15 20 32 37 47 52 98 72 17649 739 20 25 33 37 53 56 98 72 16649 746 25 32 36 39 56 58 98 75 20649 753 32 40 46 48 72 74 113 91 27649 760 40 50 54 51 80 78 119 121 33649 777 50 63 63 60 92 88 119 130 42

L3

GUNMETAL BALL VALVES

ZM_L3_int_en_20170410_112907_5.pdf 19 10.04.2017 12:35:41

20

Easytop Concealed free-fl ow valve Model  5340

article d ID Z L H1 H2 ID Ø1 Ø2649 685 16 45–130 55 70 12 23 132 38 40649 692 20 45–130 55 70 12 23 132 38 44649 708 25 45–130 56 76 12 23 132 38 44ID =  installation depthØ =  diameter

Easytop Concealed straight seat valve Model  5335

article DN d Z L H1 H2 ID Ø1 Ø2649 647 15 16 57 72 12 21 131.4 38 44649 654 15 20 57 72 12 21 131.4 38 44649 661 20 25 56 76 12 21 131.4 38 44649 678 25 32 58 78 12 21 131.4 38 44Ø =  diameter

Connection screw fi tting  90° - gunmetal

Model  2026.8

article G Z L1 L2 SS276 423 ¾ 38 44 31 30SS =  spanner size

Connection screw fi tting - gunmetal

Model  2026.7

article G Z L SS274 665 ¾ 40 54 30SS =  spanner size

CONCEALED FREE-FLOW VALVES, CONCEALED STRAIGHT SEAT VALVES

ZM_L3_int_en_20170410_112907_5.pdf 20 10.04.2017 12:35:42

21

Raxofi x with SC-Contur L3

Raxofi x Cross T-piece - brass

Model  5349

article d1 d2 d3 Z1 Z2 Z3 Z4 Z5 L1 L2 L3 L4 L5 L6 L7647 933 16 16 16 26 26 26 26 26 41 41 41 41 41 50 50647 940 20 16 16 26 26 26 26 26 40 40 41 41 41 50 50647 957 20 16 20 26 26 26 26 26 40 40 40 41 40 50 50647 964 20 20 20 26 26 26 26 26 40 40 40 40 40 50 50730 772 25 16 25 30 30 30 30 30 50 50 50 45 50 50 50730 789 25 20 25 30 30 30 30 30 50 50 50 44 50 50 50

Raxofi x Radiator connection block - PE-Xc/Al/ PE-Xc

Model  5397.6

article H L1 L2 L3 L4 L5 L6 L7 W659 042 180 1534 244 50 163 205 55 110 105659 158 250 456 244 50 233 275 55 110 105

Raxofi x Radiator connection block - PE-Xc/Al/ PE-Xc

Model  5397.7

article d L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 W698 454 16 210 392 50 200 87 35 150 210 240 25 232 98

Raxofi x Connection screw fi tting - brass

Model  5381

article d G Z L SS647 889 16 ¾ 15 38 30647 896 20 ¾ 17 40 30SS =  spanner size

L3

CROSS T-PIECES

RADIATOR CONNECTIONS

ZM_L3_int_en_20170410_112907_5.pdf 21 10.04.2017 12:35:43

22

Raxofi x Connection screw fi tting Model  5381.5

article d G Z L SS647 902 1 16 ¾ 4 22 27647 919 1 20 ¾ 6 22 30SS =  spanner size1) nickel-plated brass

Connection screw fi tting - nickel-plated brass

Model  94385.2

article d G L SS636 050 15 ¾ 14 30SS =  spanner size

Adapter set - brass

Model  1096.8

article G1 G2 L SS357 122 ½ ¾ 22 12SS =  spanner size

Adapter set Model  1096.9

article D L308 872 22 9D =  external diameter

Adapter set - brass

Model  1022.7

article G1 G2 Z L SS279 547 ¾ ¾ 14 22 30SS =  spanner size

ZM_L3_int_en_20170410_112907_5.pdf 22 10.04.2017 12:35:44

23

Raxofi x with SC-Contur L3

Skirting board radiator connection piece - gunmetal

Model  2277.2

article Ø Z1 Z2 Z3 Z4 L1 L2 L3 L4 L5 L6 L7662 509 15 19 69 35 50 34 84 72 22 25 40 11Ø =  diameter

Raxofi x Plug adapter - gunmetal

Model  5322.3

article d Z L662 547 16 35 50662 554 20 35 50

Plug adapter - gunmetal

Model  2233.6

article Z L663 346 15 30

Raxofi x Skirting board radiator connection piece - brass

Model  5373

article d1 G d2 Z1 Z2 Z3 L1 L2 L3 L4 L5 L6647 971 16 ½ 16 22 22 6 37 37 17 90 55 24647 988 20 ½ 20 22 22 6 37 37 17 90 55 24

Radiator connection set - nickel-plated brass

Model  2272.5

article d G L1 L2 L3360 399 15 ¾ 120 120 28

L3

SKIRTING BOARD RADIATOR CONNECTION PIECES

ZM_L3_int_en_20170410_112907_5.pdf 23 10.04.2017 12:35:45

24

Adapter set - matt nickel-plated brass

Model  1022.6

article R G L SS153 687 ½ ¾ 33 27SS =  spanner size

Adapter set - matt nickel-plated brass

Model  1022.5

article G1 G2 Z L SS137 342 ¾ ¾ 17 25 30SS =  spanner size

Manifold - stainless steel

Model  1078

article n L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 SS1 SS2 G1 G2586 225 2 50 142 60 75 60 210 28 53 350 25 37 3/4 1586 232 3 50 50 100 192 60 75 60 210 28 53 350 25 37 3/4 1586 249 4 50 100 150 242 60 75 60 210 28 53 350 25 37 3/4 1587 550 5 50 150 200 292 60 75 60 210 28 53 350 27 37 3/4 1587 567 6 50 200 250 342 60 75 60 210 28 53 350 25 37 3/4 1587 574 7 50 250 300 392 60 75 60 210 28 53 350 25 37 3/4 1587 581 8 50 300 350 442 60 75 60 210 28 55 25 37 3/4 1587 598 9 50 350 400 492 60 75 60 210 28 55 25 37 3/4 1587 604 10 50 400 450 542 60 75 60 210 28 53 350 25 37 3/4 1587 611 11 50 450 500 592 60 75 60 210 28 53 350 25 37 3/4 1587 628 12 50 500 550 642 60 75 60 210 28 53 350 25 37 3/4 1SS =  spanner size

Forcing plug - plastic

Model  1516.113

article G Z L116 644 ⅜ 8 85100 766 ½ 9 87107 666 ¾ 10 87

HEATING MANIFOLDS

ACCESSORIESMOUNTING ACCESSORIES

ZM_L3_int_en_20170410_112907_5.pdf 24 10.04.2017 12:35:46

order code page order code page order code pageorder code page order code page

25

100 766 24 104 658 15 104 887 15 106 027 15 107 161 15 107 666 24 116 644 24 137 342 24 153 687 24 274 665 20 276 423 20 279 547 22 308 872 22 357 122 22 360 399 23 441 524 10 449 339 10 449 346 10 470 913 15 581 701 14 586 225 24 586 232 24 586 249 24 586 706 14 587 550 24 587 567 24 587 574 24 587 581 24 587 598 24 587 604 24 587 611 24 587 628 24 636 050 22 645 595 16 645 601 16 645 618 16 645 625 16 645 632 17 645 915 11 645 922 11 645 939 11 645 946 11 645 953 11 645 960 11 645 977 13 645 984 8 645 991 8 646 004 8 646 011 8 646 028 8 646 035 8 646 042 8 646 059 8 646 103 8 646 110 8 646 127 8 646 134 8 646 141 8 646 158 7 646 165 7 646 172 7 646 189 7 646 196 7 646 202 7 646 219 7 646 226 7 646 233 7 646 240 7 646 257 7 646 264 7 646 288 8 646 295 8 646 301 8 646 318 8

646 325 8 646 332 8 646 349 8 646 356 8 646 363 8 646 370 8 646 387 10 646 394 10 646 400 10 646 417 10 646 424 10 646 431 10 646 448 10 646 455 10 646 462 10 646 486 10 646 493 10 646 509 10 646 516 10 646 523 10 646 530 10 646 547 10 646 554 7 646 561 7 646 578 7 646 585 7 646 592 7 646 608 7 646 615 7 646 622 7 646 639 9 646 653 9 646 707 7 646 714 7 646 721 7 646 738 7 646 745 7 646 752 7 646 769 7 646 776 7 646 783 7 646 790 7 646 806 9 646 813 9 646 820 9 646 837 9 646 844 9 646 851 9 646 868 9 646 875 9 646 882 9 646 899 9 646 905 9 646 912 9 646 929 9 646 936 9 646 943 9 646 950 9 646 967 9 646 974 9 646 981 9 646 998 9 647 001 4 647 018 4 647 025 4 647 032 4 647 049 4 647 056 4 647 063 4 647 070 4 647 087 4 647 094 4 647 100 4 647 117 4

647 124 6 647 131 6 647 148 6 647 155 6 647 179 6 647 186 6 647 193 6 647 223 6 647 230 6 647 278 5 647 285 5 647 292 5 647 308 5 647 315 5 647 322 5 647 339 5 647 346 5 647 353 5 647 360 5 647 377 5 647 384 5 647 391 5 647 407 5 647 414 5 647 421 5 647 438 5 647 445 5 647 452 5 647 469 5 647 476 5 647 483 5 647 490 5 647 506 5 647 513 5 647 520 5 647 537 5 647 544 5 647 551 5 647 568 5 647 575 5 647 582 5 647 599 5 647 605 5 647 612 5 647 629 6 647 636 6 647 643 6 647 650 16 647 674 17 647 681 17 647 698 12 647 704 12 647 711 12 647 735 14 647 759 15 647 766 15 647 773 15 647 780 15 647 797 15 647 803 12 647 810 12 647 865 10 647 872 10 647 889 21 647 896 21 647 902 22 647 919 22 647 933 21 647 940 21 647 957 21 647 964 21 647 971 23 647 988 23 648 015 11

648 022 11 648 039 11 648 046 11 648 053 11 648 060 11 649 296 18 649 302 18 649 319 18 649 326 18 649 333 18 649 340 18 649 357 18 649 364 18 649 371 18 649 388 18 649 395 18 649 401 18 649 418 18 649 425 18 649 432 19 649 449 19 649 456 19 649 463 19 649 470 19 649 487 19 649 494 19 649 524 18 649 548 18 649 555 18 649 562 18 649 579 19 649 593 19 649 609 19 649 616 19 649 623 19 649 630 19 649 647 20 649 654 20 649 661 20 649 678 20 649 685 20 649 692 20 649 708 20 649 715 19 649 722 19 649 739 19 649 746 19 649 753 19 649 760 19 649 777 19 651 350 14 659 042 21 659 158 21 660 659 13 662 509 23 662 547 23 662 554 23 663 346 23 678 463 11 678 470 11 684 020 13 684 037 9 690 144 13 692 438 9 692 445 9 692 902 11 698 454 21 712 341 9 712 655 9 724 412 12 724 429 12 724 436 12 724 443 12 724 450 12

725 556 8 725 563 8 728 175 8 728 182 7 730 772 21 730 789 21 738 457 5

ZM_L3_int_en_20170410_112907_5.pdf 25 10.04.2017 12:35:46

model no. page model no. page model no. pagemodel no. page model no. page

26

1022.5 24 1022.6 24 1022.7 22 1078 24 1096.8 22 1096.9 22 1516.113 24 1526. 414-897 15 2005.7 15 2021.7 14 2026.7 20 2026.8 20 2132.9 15 2141.3 14 2141.4 14 2233.6 23 2272.5 23 2277.2 23 3246 10 5311 8 5312 7 5313 7 5313.5 9 5313.8 9 5313P 7 5314 8 5314.11 8 5315 9 5315.3 9 5315.9 9 5316 4 5317 6 5318 5 5318.9 16 5321.61 13 5321.71 13 5321.81 13 5322.3 23 5323 13 5324.3 12 5325 11 5325.4 12 5325.5 11 5325.6 12 5325.7 11 5325.8 12 5326 4 5326.05 16 5326.06 16 5326.07 16 5326.08 16 5326.09 17 5326.31 17 5326.32 17 5326.4 6 5329 10 5332.11 15 5332.31 15 5332.81 14 5335 20 5337 18 5337.09 18 5338 18 5338.09 19 5339 19 5340 20 5349 21 5355 10 5356 11 5363 10 5370 19 5373 23 5381 21 5381.5 22

5397.6 21 5397.7 21 94385.2 22

ZM_L3_int_en_20170410_112907_5.pdf 26 10.04.2017 12:35:47