Upload
norman-morales
View
7
Download
1
Embed Size (px)
DESCRIPTION
The integrity of a piping system depends on the considerations and principles used in design, construction and maintenance of the system. Piping systems are made of components as pipes, flanges, supports, gaskets, bolts, valves, strainers, flexible and expansion joints. The components can be made in a variety of materials, in different types and sizes and may be manufactured to common national standards or according a manufacturers proprietary item. Some companies even publish their own internal piping standards based upon national and industry sector standards. Piping codes and standards from standardization organizations asANSIASMEISODINand others, are the most common used.The difference between piping codes and piping standards can be summarized:Piping CodesPiping codes defines the requirements of design, fabrication, use of materials, tests and inspection of pipes and piping systems - what you need to do.A code has a limited jurisdiction defined by the code. A code is not law, but can be adopted into law.Example:"ASME B31.1 (2007), Code for Pressure Piping, Section on Power Piping, as required by the laws of the States of Arizona, Alaska, Colorado, Illinois, Iowa, Kansas, Michigan, Missouri, Minnesota, Nebraska, Nevada, North Dakota, Ohio, Oregon, Wisconsin, et. alia."Piping StandardsPiping standards define application design and construction rules and requirements for piping components as flanges, elbows, tees, valves etc. - how to do it.A standard has a limited scope defined by the standard.Sponsored LinksSponsored LinksRelated TopicsCodes and Standards - Piping codes and standards - ASME, ANSI, ASTM, AGA, API, AWWA, BS, ISO, DIN and more..Related DocumentsASME - American Society of Mechanical Engineers - ASME is one of the leading organizations in the world developing codes and standardsANSI - American National Standards Institute - ANSI provides a forum for development of American national standardsDIN - Deutsches Institut für Normung - DIN - the German Institute for StandardizationISO - International Organization for Standardization - ISO - the International Organization for StandardizationASME - Performance Test Codes - The ASME Performance Test Codes provide standard directions and rules for conducting and reporting testsTag SearchSearch the Engineering ToolBox Search - "Search is the most efficient way to navigate the Engineering ToolBox!"Engineering ToolBox - SketchUp Extension - Online 3D modeling! 3D Engineering ToolBox Extension to SketchUp - add parametric components to your SketchUp mode
Citation preview
The integrity of a piping system depends on the considerations and principles used in design, construction and maintenance of the system. Piping systems are made of components as pipes, flanges, supports, gaskets, bolts, valves, strainers, flexible and expansion joints. The components can be made in a variety of materials, in different types and sizes and may be manufactured to common national standards or according a manufacturers proprietary item. Some companies even publish their own internal piping standards based upon national and industry sector standards.
Piping codes and standards from standardization organizations as
ANSI ASME ISO DIN
and others, are the most common used.
The difference between piping codes and piping standards can be summarized:
Piping CodesPiping codes defines the requirements of design, fabrication, use of materials, tests and inspection of pipes and piping systems - what you need to do.
A code has a limited jurisdiction defined by the code. A code is not law, but can be adopted into law.
Example:"ASME B31.1 (2007), Code for Pressure Piping, Section on Power Piping, as required by the laws of the States of Arizona, Alaska, Colorado, Illinois, Iowa, Kansas, Michigan, Missouri, Minnesota, Nebraska, Nevada, North Dakota, Ohio, Oregon, Wisconsin, et. alia."
Piping StandardsPiping standards define application design and construction rules and requirements for piping components as flanges, elbows, tees, valves etc. - how to do it.
A standard has a limited scope defined by the standard.
Sponsored LinksSponsored Links
Related Topics Codes and Standards - Piping codes and standards - ASME, ANSI, ASTM, AGA, API,
AWWA, BS, ISO, DIN and more..
Related Documents ASME - American Society of Mechanical Engineers - ASME is one of the leading
organizations in the world developing codes and standards
ANSI - American National Standards Institute - ANSI provides a forum for development of American national standards
DIN - Deutsches Institut für Normung - DIN - the German Institute for Standardization
ISO - International Organization for Standardization - ISO - the International Organization for Standardization
ASME - Performance Test Codes - The ASME Performance Test Codes provide standard directions and rules for conducting and reporting tests
Tag SearchSearch the Engineering ToolBox
- "Search is the most efficient way to navigate the Engineering ToolBox!"
Engineering ToolBox - SketchUp Extension - Online 3D modeling!
Search