Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
2
CO
NT
EN
TS
BRISTOL Piping Solutions Datasheets Rev. 0
Pipes ...................................………….………….………….………….………….………….………….……….…………... 3
Threaded & Grooved Fittings ..…….……….………….………….………….………….………….……….……………... 4
Seismic Protection ………………………….………….………….………….………….………….………….………….…. 5
Pipe Hangers & Support..…………...……….………….………….………….………….………….…….………….…….. 6
Conduit - Pipe Fittings …………………………………………………………………….…………………………………. 7
Fire Proofing ..................………….………….………….…..………….………….………….………….…………………... 8
Valves ..................………….………….………….………….………….………….………….………….…………………... 9
CONTENTS
3
PIP
ES
BRISTOL Piping Solutions Datasheets Rev. 0
Areas of Application
Gas Lines
Fire Fighting
HVAC Lines
Electric Poles
Standard : ASTM A53, Grade B
Size: NPS 1/2 to NPS 24 (15mm - 600mm)
Surface : Hot Dipped Galvanized & Black
Schedule : 10, 20, 30, 40 & 80
Features
Safe and Durable
Environment-Friendly Material
Cost-Effective Solution
Versatile Material
Seamless Steel
Pipes
Seamless steel pipe (SMLS) is formed by drawing a solid billet over a piercing rod to create
the hollow shell, without welding or seam. It is suitable for bending and flanging. The most
advantage is increasing the ability of withstanding higher pressure. So it is widely used for
boiler and pressure vessel, automotive area, oil well, and equipment components.
Seamless steel pipe can be cut, threaded or grooved. And the coating method includes
black / red lacquer, varnish painting, hot dip galvanization, etc.
ERW (Electric Resistance
Welded) Steel Pipes
Description
Welded steel pipe is formed by rolling plate and welding the
seam. It is cost-effective pipe with tighter Dimensional toler-
ances and less weight. ... And we mainly supply HFW (High
frequency welding) pipe in advanced technology.
The weld seam of HFW pipe is heat treated af-
ter welding that no untempered martensite remains.
Standard : Class From To
Light 1/2” 4”
BS 1387/1985 (BS
EN 10255) Medium 1/2” 6”
Heavy 1/2” 6”
4
FIT
TIN
GS
BRISTOL Piping Solutions Datasheets Rev. 0
Malleable / Ductile Iron
Threaded Pipe Fittings
Description
EFLO Fittings are cast by white iron. Through the anneal-
ing heat treatment, the brittle structure as first cast is
transformed into the malleable form, so to get its name.
They come in black and galvanized finishes, applying for
fire protection service in accordance with the NFPA 13, &
14.
Certificate UL Listed / FM Approved
Standard BS EN10242
Size NPS 1/8” to NPS 6”
Thread NPT / BSPT
Surface Black / Hot Dip Galvanized
Working Pressure Up to 500psi
Grooved Fittings
Description
EFLO Grooved Fittings are used for connecting standpipe to
control, distribute, or support pipeline in different sizes or
directions
By groove connection, project time is saved a lot with fast
installation and easy maintenance.
Certificate UL Listed / FM Approved
Standard ANSI / UL 213C
Size NPS 1” to NPS 12”
Material Ductile Iron as ASTM A536
Surface Red Painting/ Hot Dip
Working Pressure Up to 500psi
Gasket Name Temperature
Range Color Mark
E EDPM -34 ~ +110˚C Green Strip
D NBR -29 ~ +82˚C Orange Strip
S Silicon Rubber -40 ~ +177˚C White Strip
5
SE
ISM
IC S
UP
PO
RT
BRISTOL Piping Solutions Datasheets Rev. 0
They must be matched to the supply pipe diameter, which governs total
gallons per minute (gpm), so that they do not exceed the ability of the
system to deliver equal water pressure to all sprinklers. There are also guide-
lines for the number of bends allowed, governed by the length of the flexi-
ble line.
Flexible Sprinkler Drop
Flexible fire sprinkler drops can be used in both wet and dry systems. They
include a bracket that holds the sprinkler head in place. This helps con-
tractors position the sprinkler head accurately in the center of tiles in drop
ceiling applications. These drops also provide the adaptability to the
movement required in earthquake-prone areas.
The higher initial cost relative to a solid pipe style may be a deterrent. But
in light of the much lower assembly time, price becomes less of a consider-
ation when assessing costs throughout an entire fire sprinkler system. A
sprinkler fitter can install flexible drops four or more times faster than rigid
alternative
Expansion Joint / Bellows
Expansion joints are used in piping systems to absorb thermal expansion or terminal movement where the use of expansion loops is undesirable
or impractical. Expansion joints are available in many different shapes and materials.
The expansion joint is also known as expansion bellows. They are designed to control the movement in pipework & safely absorb the tempera-
ture-induced expansion and contraction of construction materials, to absorb vibration, to hold parts together.
6
PIP
E H
AN
GE
RS
& S
UP
PO
RT
BRISTOL Piping Solutions Datasheets Rev. 0
Description
Designed for the suspension of non-insulated stationary pipe lines. The knurled insert nut that
allows a vertical adjustment after installation, is tapped to NFPA reduced rod size standards.
Captured knurled insert nut present on pipe sizes 1⁄2” (15mm) to 2″ (50mm). The capture is
permanent in the bottom portion of the band, allowing the hanger to be opened during
installation if desired, but preventing the knurled insert nut from falling completely out.
Swivel Ring Hangers
U Strap Clamp
Description
U Strap Clamp is used for mounting plain or insulated pipes. It can
be used with Rubber Support Inserts.
Available in hot dipped galvanized & Electro galvanized.
Material Specification
Material : Low Carbon Steel/Carbon Steel
Finish: Pre-Galvanized
Material Specification
Material : Steel
Finish: Hot Dipped Galvanized / Electro Galvanized
7
CO
ND
UIT
S &
CA
BL
ES
BRISTOL Piping Solutions Datasheets Rev. 0
Conduit Pipe and Fittings
Description
Conduit Pipe and Fittings are durable tubing or other types of
enclosure used to protect and provide a route for individual elec-
trical wiring conductors. Conduit is typically required where wiring
is exposed or where it might be subject to damage. A conduit can
be made of metal or plastic and may be rigid or flexible. All con-
duit is installed with compatible fittings (couplings, elbows, con-
nectors) and electrical boxes, usually made of the same or similar
material. Conduit must be installed in accordance with the Nation-
al Electrical Code (NEC) and all applicable local code rules.
Fire Performance
Cable
Description
Fire Performance Cables are intended for applications requiring
circuit integrity during fire. These cables generate very low smoke
and are halogens free thus helping to save human life and protect
the sensitive equipments.
Fire performance cables improves safety, reduces fire damages to
buildings or equipments and provides extra time to escape during
fire.
8
FIR
E P
RO
OF
ING
BRISTOL Piping Solutions Datasheets Rev. 0
Bristol Mortar Seal (BFB-TX1)
A mixture of cement and re-retardant chemicals that is
applied to seal openings in walls and cut outs in -oors to
create re barriers. It is light-weight and low-density prod-
uct that does not allow any through passage in case of re
to prevent penetration of re, toxic gases and smoke.
Property Present Value
Bulk Density Approx 700 gm/Litre (+/- 50)
Compressive Strength Approx 1.2 to 1.9 N/mm2
Storage Temperature 5°C to 50°C in dry condition
Ph Value Approx. 9 to 12.5
Toxicity Non-toxic
Mix Ratio 1 : 0.64 (Mortar : Water)
Application Temperature Room Temperature
Color Grey
Shelf Life 18 months , in original packed Condi-
tion
Packaging 30 Kg.
A re-retardant coating
for electrical cables/
trays. During a re, prod-
uct undergoes an en-
dothermic reaction
which reduces burning
rate and spread of re
becomes insulating
char to burns and chars
to prevent smoke
and -ame from propa-
gating further.
Bristol Cable Coating (BFB-TX3)
Property Present Value
Life Expectancy 40 Years
Density 1.30 to 1.45 gms/ cm3
pH 6.0 to 8.0
Appearance Grey / Off white caulking compound
Odor Odorless
Curing time 2 to 3 mm in 2 days
Flash Point None
Resistance to moisture & humidity Good
Toxicity Non Toxic
Application Temperature 5°C to 50°C
Flexibility /Movement +/-25%
Recommended minimum thickness/ depth 12 mm to 15 mm in annular space
Shelf Life 12 months in a dry place with original
packed condition
Consists of panel boards ( of either mineral or rock wool ) which is coat-
ed with our Bristol Mastik Coating on the exposed sides to create re
barriers in wall or floor openings.
Bristol Panel Seal (BFB-TX2)
Property Present Value
Density of Ace Mastick Approx 700 gm/Litre (+/- 50)
Bulk Density Approx 1.2 to 1.9 N/mm2
Thickness of Coating 5°C to 50°C in dry condition
Curing Rate Approx. 9 to 12.5
Shelf Life Non-toxic
Life Expectancy of Ace Mastick 1 : 0.64 (Mortar : Water)
Density of Ace Mastick Room Temperature
pH of Ace Mastick Grey
Flexibility 18 month sin original packed condition
Appearance 30 Kg
Odor Room Temperature
Flash Point Grey
Resistance to moisture & humidity 18 months in original packed condition
Toxicity Non Toxic
Application Temperature 5°C to 50°C
Mineral Wool Board details 50 mm thick . Density 0.09 Ounce/
Inch3.Coated with Ace Mastick Coating to
a dry thickness of 1.5 mm
9
VA
LV
ES
BRISTOL Piping Solutions Datasheets Rev. 0
Gate Valves
Gate Valves are valves that open by lifting a round or rectangular gate/
wedge out of the path of the fluid. They are characterized as having
either a rising or a non-rising stem. BRISTOL Gate Valves are made of high
quality materials and conform to international and local standards
Specification
Design Standard ……. AWWA C515 / BS 5163 / UL 262
Working Pressure ……… 300psi
Type ………………………Outside Stem & Yoke - Resilient Seated
Wedge
Connection Type ………. Flange EN 1092 PN16 / ANSI B16.1 Class 125 /
ANSI B16.5 Class 150
Finishing: …………………. Fusion Bonded Epoxy Coated Interior and
Exterior RAL3002
Materials
Boidy………………… Ductile Iron ASTM A536 65-45-12
Wedge: …………….. Ductile Iron ASTM A536 65-45-12 + EPDM
Wedge Nut: ……….. Stainless Steel AISI 304
Gasket: …………….. EPDM
Packing: …………… Graphite
Handwheel: ……….. Ductile Iron ASTM A536 65-45-12
OS&Y Gate Valve & Non
Rising Stem Gate Valve
Butterfly Valve
Butterfly Valves are valves which can be used for isolating or
regulating flow, with the closing mechanism in the form of a
disk. BRISTOL Butterfly Valves are supervised and can be used
for indoor and outdoor application.
LISTED EX16012
Specifications
Design Standard: ………. UL 1091
Working Pressure: ………. 300psi & 175psi
Type: ……………………... Wafer Type - Gear Actuated - Supervised (2xSPDT)
Connection Type: ……... Suitable for ANSI / EN / BS / DIN Flanges
Materials Body: …………………….. ASTM A-536 Nylon-11 Coated
Disc: …….………………... ASTM B-536 EPDM Encapsulated
Upper/Lower Stem: ……. AISI 420-SS
Worm Gear Shaft: ……… AISI 410-SS
Housing: …………………. ASTM A-536
Handwheel: …………….. ASTM A-536
Flag Indicator: ………….. ASTM A-536
Shear Pin: ……………….. ASTM A-536
Segment Gear: …………. ASTM B-148 or B-584
Housing Gasket: ………… EPDM Grade E
O-Ring: …………………… EPDM Grade E
Wafer Type
10
VA
LV
ES
BRISTOL Piping Solutions Datasheets Rev. 0
Grooved Type
Specifications
Design Standard: ………. UL 1091
Working Pressure: ………. 300psi & 175psi
Type: ……………………... Gear Actuated - Supervised (2xSPDT)
Connection Type: ……... Grooved AWWA C606
Materials
Body: …………………….. ASTM A-536 Nylon-11 Coated
Disc: …….………………... ASTM B-536 EPDM Encapsulated
Upper/Lower Stem: ……. AISI 420-SS
Worm Gear Shaft: ……… AISI 410-SS
Housing: …………………. ASTM A-536
Handwheel: …………….. ASTM A-536
Flag Indicator: ………….. ASTM A-536
Shear Pin: ……………….. ASTM A-536
Segment Gear: …………. ASTM B-148 or B-584
Housing Gasket: ………… EPDM Grade E
O-Ring: …………………… EPDM Grade E
BR-HPG-300
Non-Return / Check Valve
Swing Type
Non-Return Valves or Check Valves are valves that normally allow
fluid to flow through it in only one direction. BRISTOL Check Valves
are swing type with a tilted clapper. BRISTOL Check Valves clapper
design produces quick, non-slam closure before flow reversal can
occur meeting the FM requirements for an anti-water hammer valve
rating.
LISTED EX16011
Specifications
Approval: ………………. ANSI/UL 312
Working Pressure: ………. 300psi
Type ……………………... Swing Type
Connection Type ……... Grooved AWWA C606
Finishing: ………………... Fusion Bonded Epoxy Coated
Interior and Exterior RAL3002
Materials
Body: …………………….. Ductile Iron ASTM A536 Epoxy
Coated
Clapper: ………………... Stainless Steel ASTM A167 (2”-5”)
Ductile Iron ASTM A536 65-45-12
(6”-8”)
Clapper Facing: ………. EPDM Grade E
Seat Ring: ………………. Stainless Steel ASTM A213
Spring: …………………... Stainless Steel ASTM A313
Hinge Pin: ………………. Stainless Steel ASTM A580
Hinge Pin Bushing: ……. Sintered Bronze ASTM B438
Drain Plug: ……………… Cast Iron ASTM A126 Class A
LISTED EX16012
Butterfly Valve
11
VA
LV
ES
BRISTOL Piping Solutions Datasheets Rev. 0
Y Strainer
Specifications
Design Standard: ………. UL Subject 321
Working Pressure: ………. 300psi
Type: ……………………... Basket Type @Y@ Strainer
Connection Type: ……... Flange EN 1092 PN16 / ANSI B16.1 Class 125 / ANSI
(Flanged Type) B16.5 Class 150
(Flanged x GroovedType)Inlet Coupling —-> Flange ANSI 125
Outlet Coupling —> Groove AWWA C606~
(Grooved Type) Groove AWWA C606 (Inlet & Outlet)
Materials
Body: …………………….. Ductile Iron ASTM A-536 Grade 65-45-12
Cover: …….……………… Ductile Iron ASTM A-536 Grade 65-45-12
Screen: …………………... Stainless Steel AISI 304
Gasket: …………………... EPDM
Plug: ……………….……... Carbon Steel
Y-Strainers are used in straining debris from pipelines.
They are fitted in the field with nipples and drain valves
to permit the strainer screen to be cleaned while the
system is still in process. BRISTOL Y-Strainers are compact
and economical while also adhere to international and
local standards.
Flanged Type
BFE70FF
Flanged X Grooved Type
BFE70FG
Grooved Type
BFE70GG
LISTED EX16208
Test & Drain Valve, BF-VT001
Standard ………………………… UL Subject 258
Connection Type……………….. 1” M x F NPT
Body Material :…………………… Brass
Working Pressure :………………. 175psig / 12bar
K Factor :…………………………. 5.6
12
AC
CE
SS
OR
IES
BRISTOL Piping Solutions Datasheets Rev. 0
Gate Valves Accessories
Non-Rising Stem Gate Valves alone cannot be identified if open or closed by visual inspection. Accessories
such as indicator posts are necessary to supervise these valves. BRISTOL Indicator Posts complement BRIS-
TOL NRS Gate Valve but are also compatible to other gate valves of the same standards.
Specification
Design Standard: …… ANSI/UL 789
Orientation: ………… Wall Post/Ground Post
Body: …………………. Ductile Iron ASTM A536
Finishing: …………….. Fusion Bonded Epoxy
Coated Interior and Exterior
RAL3002
LISTED EX16104
Indicator Post, UL Listed, FM Approved
Water Flow Detector
Water flow detectors are
electro-mechanical device
designed to send an alarm to
a fire alarm panel and/or fire
department when a continu-
ous flow of water occurs
through the fire sprinkler sys-
tem‘s piping from an activat-
ed fire sprinkler head or leak
in the system..
Specifications & Materials
Model Series IM6001
Flow Sensitivity 4-10gpm (15-38Lpm)
Contact Rating 8A @ 250VAC 3A @ 24VDC 2.5A @ 30VDC
Working Pressure 450psi
Operating Temperature Range 0°C to 68°C
Corrosion Protection Fusion Bonded Epoxy Coated Interior Exterior
Pressure Gauge
Features
UL-listed (UL-393), United States and
Canada
Factory Mutual (FM) approved
Reliable and economical