Pipe fitting tools

What for ?

• What do we use _________ for ?• What do we use _________ for ?• What do we use _________ for ?• What do we use _________ for ?• What do we use _________ for ?• What do we use _________ for ?

Spirit Levels

Why do we use a spirit level ?

• We use a spirit level to check whether a surface is horizontal or vertical.

Spanner

• spanner

Why do we use a spanner ?

• We use a spanner to turn nuts and bolts.

Combination spanner

Why do we use a combination spanner ?

• We use a combination spanner to hold and turn things of different sizes.

Adjustable spanner

Why do we use an adjustable spanner ?

• We use an adjustable spanner to loosen and tighten things of different

sizes.

Stillson wrench

Why do we use a stillson wrench?

• We use a stillson wrench to turn soft iron pipes and fittings with a rounded surface.

Hacksaw

Why do we use a hacksaw?

• We use a hacksaw to cut metal or plastic.

Pliers

Why do we use pliers?

• We use pliers to pull nails and cut wire.

Hammer

Why do we use a hammer?

• we use a hammer to hit nails.

Scriber

Why do we use a scriber?

• we use a scriber to mark lines on metal or wood before cutting or shaping.

Measuring tape

Why do we use a measuring tape?

• We use a measuring tape to measure the length of things.

Engineers square

Why do we use an Engineers square ?

• we use an Engineers square to mark out right angles.

COMBINATION SQUARE

Why do we use an combination square ?

• we use an combination square to mark out right angle.

Glass paper

Why do we use glass paper ?

• we use glass paper to make things (metal , wood , etc.)smooth.