Pipe and Flange Protection - Metalika Kacin · 2012. 7. 6. · 76 Protect! Pipe and Flange Protection Moss offer a wide range of Plastic Protection Products for pipes and flanges

77

Pipe and Flange Protection

78-82

Pipe Caps

82-83

Pipe Plugs

84-89

Flange Protection

76

Protect!Pipe and Flange Protection

Moss offer a wide range of Plastic Protection Productsfor pipes and flanges. Our range of Pipe Protection

provides solutions for the protection of pipes,pipe bevels and internal pipe walls

from corrosion and damage.

78

Part Number

Part Number Nominal

Pipe SizeDimensions (mm)

No Vent Hole Vent Hole d H43972 DN 450 18" 457.2 63.043973 43457 DN 500 20" 508.0 65.031710 DN 550 22" 558.8 60.043974 43458 DN 600 24" 609.6 67.031713 DN 650 26" 660.4 100.0

110284* 110300* DN 700 28" 711.2 120.0110285* 110303* DN 750 30" 762.0 120.0110286* 110306* DN 800 32" 812.8 120.034240** DN 850 34" 863.6 170.0110287* 110309* DN 900 36" 914.4 150.034244** DN 950 38" 965.2 180.031727** DN 1000 40" 1016.0 180.031731** 42013** DN 1050 42" 1066.8 185.034248** DN 1100 44" 1117.8 185.0

31725 200.034252** DN 1400 56" 1422.4 215.034254** DN 1500 60" 1524.0 220.034256** DN 1600 64" 1625.6 230.0

Part Number

Part Number Nominal

Pipe SizeDimensions (mm)

No Vent Hole Vent Hole d H10286 43558 DN 15 1⁄2" 21.3 20.010287 43559 DN 20 3⁄4" 26.9 25.010288 43560 DN 25 1" 33.7 30.010294 10268 DN 32 11⁄4" 42.4 28.010295 10269 DN 40 11⁄2" 48.3 30.010296 10267 DN 50 2" 60.3 30.010298 10266 DN 65 21⁄2" 76.1 35.0

199480 199481 DN 80 3" 88.9 36.0199482 199483 DN 90 31⁄2" 101.6 40.0199484 199485 DN 100 4" 114.3 40.0199486 DN 115 41⁄2" 127.0 40.0199488 199489 DN 125 5" 139.7 40.0199490 DN 140 51⁄2" 152.4 40.0199492 199493 DN 150 6" 168.3 40.0199494 199495 DN 200 8" 219.1 40.0199496 199497 DN 250 10" 273.0 45.0199498 199499 DN 300 12" 323.9 50.043970 43454 DN 350 14" 355.6 57.043971 43455 DN 400 16" 406.4 60.5

Next day delivery

UK EXPRESS

Caps for Standard Pipe SizesSR 1358/1352

Yellow LDPE

• Low cost and high quality

• Internal ribs ensure tight fit and release pressure build-up

* Black LDPE** Flexible PEMaximum vent hole size is 4mm on 11⁄4" to 12" pipe caps and as specified for larger sizes.Nominal diameters above DN 300 - 12" are the exact conversion of the d dimension.

Protection for Pipes up to 64" diameter

79

Part Number

Nominal Diameter

Dimensions (mm)Colour

d H34098 - 10.0 13.0 Grey12773 - 10.2 16.0 Red12774 - 12.0 16.0 Red

462573 - 12.7 15.0 Black34101 1⁄4" 13.7 13.0 Grey34102 - 14.0 13.0 Grey34103 - 15.0 13.0 Grey12775 - 15.0 20.0 Red34104 - 16.0 13.0 Grey12776 - 16.0 20.0 Red34105 3⁄8" 17.2 13.0 Grey34106 - 18.0 13.0 Grey12849 - 18.0 20.0 Red34108 - 20.0 20.0 Grey12777 - 20.0 20.0 Red34110 - 22.0 20.0 Grey12850 - 22.0 20.0 Red34111 - 24.0 20.0 Grey34112 - 25.0 20.0 Grey12779 - 25.0 20.0 Red34113 - 26.0 20.0 Grey34115 - 28.0 20.0 Grey12780 - 28.0 26.5 Red12846 - 30.0 26.5 Red34118 - 32.0 30.0 Grey12956 - 32.0 26.8 Yellow

462574 - 35.0 28.0 Black34120 - 35.0 30.0 Grey12781 - 35.0 26.5 Red34121 - 38.0 30.0 Grey12782 - 38.0 27.0 Red12616 - 39.3 25.0 Yellow34123 - 40.0 30.0 Grey12957 - 40.0 26.7 Yellow34124 - 41.5 30.0 Grey12783 - 41.5 27.0 Red34128 - 50.0 30.0 Grey

462576 - 50.8 29.0 Black34130 - 51.0 30.0 Grey34131 - 52.0 30.0 Grey

462577 - 54.0 36.0 Black34132 13⁄4" 54.0 30.0 Grey12982 - 54.0 27.8 Red34134 - 57.0 30.0 Grey34135 - 59.0 30.0 Grey

Part Number

Nominal Diameter


d H34138 - 63.5 30.0 Grey12617 - 63.5 29.0 Yellow

462578 - 63.5 33.0 Yellow34139 - 66.5 30.0 Grey34141 - 70.0 30.0 Grey34142 - 73.0 30.0 Grey

462579 - 75.0 38.0 Black34143 - 75.0 30.0 Grey12618 - 75.0 31.0 Yellow

462580 - 77.0 32.0 Black34145 - 77.0 30.0 Grey

462581 - 78.0 32.0 Black462582 - 79.4 28.0 Black462583 - 80.5 28.0 Black34146 - 82.0 30.0 Grey34149 - 83.0 30.0 Grey34150 - 85.0 40.0 Grey34153 - 90.0 40.0 Grey12959 - 92.0 34.5 Yellow

462584 - 92.4 32.0 Yellow10076 - 94.0 40.0 Red34155 - 95.0 40.0 Grey12633 - 95.5 33.0 Yellow

462585 - 96.5 39.0 Red462586 - 100.3 40.0 Red34162 - 104.0 40.0 Grey34165 - 108.0 40.0 Grey34166 - 110.0 40.0 Grey12960 - 110.0 34.6 Red34167 - 111.0 40.0 Grey34172 - 125.0 40.0 Grey12619 - 125.0 35.0 Yellow12961 - 125.0 34.1 Yellow31702 - 133.0 40.0 Grey12620 - 137.0 35.0 Yellow31635 5" 141.3 40.0 Grey

803083 51⁄2" 152.4 47.0 Yellow31712 - 159.0 40.0 Grey31715 - 160.0 40.0 Grey31638 - 177.8 40.0 Grey31717 - 185.0 40.0 Grey31707 - 193.7 40.0 Grey34183 - 200.0 40.0 Grey34185 - 210.0 40.0 Grey31639 8" 219.1 50.0 Grey34188 91⁄2" 242.0 50.0 Grey

462589 - 243.0 50.0 Grey

Pipe Caps

UK EXPRESS

Ribbed Pipe CapsSR 1387

LDPE

• Injection-moulded caps with internal ribs

• Meet ANSI and DIN specifications

80

Part Number

Nominal Diameter

Dimensions (mm)d H

34817 - 236.0 100.031746 - 244.5 55.034189 - 250.0 60.041082 - 260.0 60.034190 - 264.0 60.039189 - 264.0 100.034191 101⁄2" 267.0 60.031735 10” 273.0 65.031724 10” 273.0 115.034192 - 281.0 65.034193 111⁄4" 285.0 65.034812 - 286.0 100.034194 111⁄2" 293.0 80.034818 - 298.0 80.034197 121⁄4" 311.0 70.034198 - 315.0 70.031789 121⁄2" 318.0 70.031694 12" 323.8 75.034814 12" 323.8 100.034200 13" 330.0 75.034202 - 338.0 75.034203 131⁄2" 343.0 75.034204 - 350.0 80.031685 14" 355.6 80.034815 14" 355.6 100.034816 - 360.0 100.031709 141⁄2" 368.0 80.034205 141⁄2" 368.0 160.031642 - 378.0 185.034206 15” 381.0 80.034207 151⁄4" 388.0 80.034208 151⁄2" 394.0 80.034209 - 400.0 75.041021 - 404.1 103.034819 16" 406.4 120.031706 161⁄2" 419.0 90.036407 - 432.0 80.031730 - 433.0 80.034210 171⁄2" 445.0 90.034211 175⁄8" 455.0 80.034213 181⁄2" 470.0 80.034214 19" 482.0 80.034215 - 490.0 95.034216 191⁄2" 495.0 100.034217 - 514.0 80.031708 201⁄2" 521.0 110.034219 21" 534.0 80.034220 - 564.0 85.034221 221⁄2" 574.0 80.034222 23” 585.0 120.031729 - 586.0 90.034223 231⁄2" 597.0 115.034224 - 616.0 95.031711 241⁄2" 622.0 130.0

Part Number

Nominal Diameter

Dimensions (mm)d H

34129 - 50.8 90.031143 - 55.7 45.034137 2" 60.3 60.041122 - 61.0 75.034140 - 69.0 36.048211 - 75.0 92.034148 - 82.5 40.034151 - 86.0 43.048212 - 86.0 60.034154 - 92.0 43.034156 - 97.0 43.034158 - 100.0 46.034159 - 100.0 65.032709 31⁄2" 101.6 100.034161 - 103.0 43.034169 4” 114.3 50.041102 - 117.9 50.034171 - 122.0 45.034173 41⁄2" 127.0 45.032711 41⁄2" 127.0 100.031641 - 128.5 90.034174 - 136.0 47.034175 - 139.7 65.032712 5” 141.3 100.034835 - 148.0 50.037010 - 149.2 8.032713 51⁄2" 152.4 100.032714 - 155.8 100.032790 - 159.0 100.034178 - 160.0 47.039565 - 165.1 40.034179 6" 168.3 50.034803 6" 168.3 100.034180 - 171.0 50.035282 - 171.0 100.034839 - 176.8 74.034181 - 177.8 65.034182 - 180.0 50.041057 - 180.0 100.034804 - 185.0 100.034805 - 193.7 100.031704 - 200.0 50.034806 - 200.0 100.034184 - 203.0 120.031781 - 210.0 50.034807 - 210.0 100.031785 81⁄2" 216.0 50.041017 - 217.1 65.031733 8" 219.1 55.034808 8" 219.1 100.034809 8" 219.1 120.034186 - 225.0 55.034842 - 230.0 55.034187 - 235.0 55.0

Over 2000 new products

UK EXPRESS

Flexible Pipe CapsSR 1388

Flexible PE

• Rotational moulded caps in more flexible PE material

• Softer material allows easier fitting on pipe

• Range covers wide range of larger sizes

CONTINUED ON NEXT PAGE

81

Part Number

Nominal Diameter


d H12080* - 19.0 12.7 Yellow12081 1⁄2" 21.4 17.2 Yellow

12082* - 22.2 17.7 Yellow12084* - 25.4 22.0 Yellow50248 27.0 25.4 Black12085 3⁄4" 27.0 25.4 Yellow10275 - 31.8 25.4 Yellow10677 1" 33.4 24.8 Yellow12086 - 34.1 22.8 Yellow11356 - 35.0 24.6 Yellow10989 - 38.0 28.4 Yellow51061 - 41.3 26.6 Black11118 - 41.3 26.6 Yellow60606 11⁄4" 42.9 25.4 Black12087 11⁄4" 42.9 25.4 Yellow11236 - 44.5 26.6 Yellow11360 - 47.7 28.4 Yellow51200 11⁄2" 48.3 27.0 Black11238 11⁄2" 48.3 27.0 Yellow10146 - 50.8 24.3 Yellow10834 13⁄4" 54.0 28.4 Yellow11217 - 57.2 25.4 Yellow51109 2" 60.3 26.6 Black10195 2" 60.3 26.6 Yellow10648 - 63.5 30.4 Yellow11337 - 70.0 30.0 Yellow86470 21⁄2" 76.1 31.0 Black11198 21⁄2" 76.1 31.0 Yellow11408 - 82.5 31.0 Yellow

Part Number

Nominal Diameter

Dimensions (mm)d H

34225 25" 635.0 130.034226 251⁄2" 648.0 80.034227 261⁄4" 667.0 100.034228 261⁄2" 673.0 135.034229 27" 686.0 135.034230 28" 711.2 260.034231 - 719.0 105.034232 29" 736.6 145.034233 - 746.0 150.034235 - 793.0 80.034236 - 800.0 155.034238 321⁄2" 825.0 165.034239 331⁄4" 851.0 80.031728 - 890.0 170.034242 351⁄2" 902.0 175.034243 361⁄4" 921.0 135.031725 1219.2 200.0

Pipe Caps

UK EXPRESS

Heavy Duty Pipe CapsSR 1389

Black and Yellow LDPE

• Reinforced design

• Fit smaller pipe sizes

Flexible Pipe Caps CONTINUED

SR 1388

82

HH1

OD

H

WT

H1

OD

Part Number

To Fit Pipe Specification Dimensions (mm) Std Pack QtyDIN Nominal Diameter OD WT H H1

110423 DN 150 6” 168.3 15.0 100.0 90.0 30110424 DN 150 6” 168.3 23.0 100.0 90.0 30110425 DN 200 8” 219.1 15.0 100.0 90.0 20110426 DN 200 8” 219.1 23.0 100.0 90.0 20110427 DN 250 10” 273.0 15.0 100.0 90.0 12110428 DN 250 10” 273.0 23.0 100.0 90.0 10110429 DN 250 10” 273.0 32.0 100.0 90.0 12110430 DN 300 12” 323.9 15.0 100.0 90.0 25110431 DN 300 12” 323.9 23.0 100.0 90.0 25110432 DN 300 12” 323.9 32.0 100.0 90.0 25110433 DN 350 14” 355.6 23.0 100.0 90.0 50110434 DN 350 14” 355.6 32.0 100.0 90.0 50110435 DN 400 16” 406.4 23.0 100.0 90.0 50110436 DN 400 16” 406.4 32.0 100.0 90.0 50

Part Number

Pipe Outside Diameter (mm)

Max Wall Thickness (mm)

Dimensions (mm) Std Pack Qtyd1 d2 d3 d4 D H

492200 10.0 - 12.0 6.0 - - 9.7 11.7 2000492201 12.0 4.5 12.0 6.0 - - 11.7 11.7 2000492202 15.0 5.0 17.4 9.8 - - 14.7 16.3 2000492203 16.0 5.0 17.4 9.8 - - 15.7 16.3 2000492204 18.0 6.0 17.4 9.8 - - 17.7 16.3 2000492205 20.0 4.0 25.5 19.4 14.6 11.9 19.7 31.4 2000492206 21.3 4.5 25.5 19.4 14.6 11.9 20.9 31.4 2000492207 22.0 4.5 25.5 19.4 14.6 11.9 21.7 31.4 2000492208 24.8-25.0 4.5 30.0 25.0 19.9 15.8 24.7 31.4 2000492209 26.0-26.9 5.5 30.0 25.0 19.9 15.8 26.1 31.4 2000492210 28.0-28.5 5.5 30.0 25.0 19.9 15.8 27.7 31.4 2000492211 30.0 8.0 30.0 25.0 19.9 15.8 29.7 31.4 2000492212 33.7 8.0 37.7 31.5 27.5 17.6 32.5 30.8 2000492213 35.0 8.0 37.7 31.5 27.5 17.6 34.7 30.8 1000492214 38.0 8.0 37.7 31.5 27.5 17.6 37.7 30.8 1000492215 40.0 8.0 46.8 42.3 36.9 25.5 39.7 30.8 1000492216 41.3-42.4 8.0 46.8 42.3 36.9 25.5 41.0 30.8 1000492217 47.5-48.3 9.0 - 49.0 45.3 28.0 47.9 31.5 500492218 50.0 10.0 - 49.0 45.5 28.0 49.4 31.5 500492219 54.0 10.0 - 49.0 45.5 28.0 53.6 31.5 500492220 60.3 14.0 60.2 56.0 46.2 35.0 59.8 31.5 500492221 63.5 12.0 60.2 56.0 46.2 35.0 62.5 31.5 500492222 73.0 16.0 - - - 48.8 71.9 31.5 200492223 75.0-76.2 16.0 - - - 48.8 75.5 31.5 200492224 85.0 17.0 88.9 79.5 73.1 60.3 84.0 31.5 200492225 88.9 17.0 88.9 79.5 73.1 60.3 88.0 31.5 200492226 114.3 20.0 - 112.5 109.0 70.0 113.0 35.0 100

Order any quantity - Split packs available

UK EXPRESS

Heavy-Duty Recessed CapsSR 1370

Black LDPE

• Protect pipe bevels and internal walls from corrosion and damage

• Accept crane hooks for moving pipes during storage, transit and laying

• Resistant to temperatures from -30°C to +60°C

Ribbed Pipe-End PlugSR 1171

Red LDPE

• Flexible ribs allow plug to fit multiple diameters

• Ideal for plugging copper tubes

83

Nominal Pipe Size Outside Pipe Diameter (mm)8" 219.1

10" 273.112" 323.914" 355.616" 406.418" 457.220" 508.022" 558.824" 609.626" 660.428" 711.230" 762.032" 812.834" 836.636" 914.4

Nominal Pipe Size Outside Pipe Diameter (mm)38" 965.240" 1016.042" 1066.844" 1117.646" 1168.448" 1219.250" 1270.052" 1320.854" 1371.656" 1422.458" 1473.260" 1524.062" 1574.864" 1625.6

Pipe Plugs

UK EXPRESS

Figure 4By giving a few taps with a hammer on top of the clamping system the bevel

protector expands and forces itself against the inner pipe surface

Figure 3Clamping system of the steel bevel protector

Figure 2Steel bevel protector and pipe plug combined together in a pipe-end, sealing the

pipe completely

Figure 1Steel bevel protector and pipe plug

Bevel Edge Protectors and PlugsSR 1360

Bevel Edge Protector - Steel Bevel

Pipe Plug - PE/Flexible PE

• Bevel protector designed for use with pipes from 8" to 120"

• The bevel protector is easy to apply by pushing onto the pipe-end and hammering down the clamping system

• The clamping system will expand and force the protector against the inner pipe surface

• Bevel protector combines with pipe plug in sizes 8" to 64" for optimal protection and pipe closure

• Pipe plug has depth of at least 100 mm to accept crane hook

• The steel bevel protector keeps the pipe plug firmly in position during handling, transportation and storage

• Available with a corrosion inhibitor to protect inside pipe against damage from moisture

Please contact our sales office for full details on this range

Bevel Ring and Plug to suit pipe sizes

84

d

D

d

D

Part Number Type Nominal DiameterDimensions (mm)

D d H31648 2 DN 15 1⁄2" 45.0 15.8 -31653 2 DN 20 3⁄4" 58.0 20.8 -34325 2 DN 25 1" 68.0 26.0 -31649 2 DN 32 11⁄4" 78.0 33.5 -34326 2 DN 40 11⁄2" 88.0 41.5 -32440 1 DN 50 2" 102.0 49 - 55 -

110295 2 DN 50 2" 103.0 51.0 -32441 1 DN 65 21⁄2" 122.0 63 - 70 -32442 1 DN 80 3" 138.0 76 - 83 -32443 1 DN 100 4" 162.0 100 - 107 -34335 1 - 165.0 90 - 100 -32444 1 DN 125 5" 188.0 123 - 132 -32445 1 DN 150 6" 218.0 149 - 159 -34336 1 - - 240.0 130 - 140 -34337 1 - - 245.0 140 - 150 -32446 1 DN 200 8" 285.0 196 - 207 -34338 1 - - 310.0 185 - 200 -32447 1 DN 250 10" 345.0 247 - 260 -34339 1 - - 370.0 220 - 240 -32448 1 DN 300 12" 410.0 295 - 310 -32449 1 DN 350 14" 465.0 325 - 341 -32450 1 DN 400 16" 530.0 374 - 392 -32451 1 DN 450 18" 570.0 424 - 443 -32452 1 DN 500 20" 625.0 472 - 494 -34370 1 DN 600 24" 725.0 570 - 596 -

494283 3 DN 15 1⁄2" 45.0 19.0 16.5 494284 3 DN 20 3⁄4" 58.0 24.0 16.5 494285 3 DN 25 1" 70.0 30.0 19.5 494286 3 DN 32 11⁄4" 78.0 39.0 29.5 494287 3 DN 40 11⁄2" 88.0 45.0 29.5 494288 3 DN 50 2" 102.0 56.0 29.5 494289 3 DN 65 21⁄2" 122.0 72.0 34.5 494290 3 DN 80 3" 138.0 85.0 34.5 494291 3 DN 100 4" 163.0 119.0 36.5 494292 3 DN 125 5" 190.0 143.0 36.5 494293 3 DN 150 6" 215.0 170.0 36.5 494294 3 DN 200 8" 270.0 221.0 41.5 494295 3 DN 250 10" 345.0 275.0 41.5 494296 3 DN 300 12" 408.0 325.0 41.5

Quote / sample / order online

UK EXPRESS

Self-Adhesive Flange DiscsSR 1361

Black Rubber

Type 1

Type 2

Face ProtectorsSR 1354

Yellow Polyethylene

• Protect against dirt, moisture, paint and sand blasting

• Suitable for DIN and ANSI flanges

• Provide full flange face protection

• Protect both DIN and ANSI flange specifications

• Ozone and weather resistant

• Withstand temperatures from -15°C to +70°C

• Resistant to petrol, oil and non-oxidisation acids

• Available with holes for internal bore sand blasting

• Standard thickness 1.5mmANSI

All ANSI flange discs suitable for series pressure group (lbs) 150, 300, 400, 600, 900, 1500 and 2500.

Part Number Nominal Diameter Disc Diameter (mm)

48326 1⁄2" 36.048327 3⁄4" 45.048328 1" 54.048329 11⁄2" 75.048330 2" 95.048331 3" 130.048332 4" 160.048333 5" 200.048334 6" 220.048335 8" 275.048336 10" 330.048337 12" 390.048338 14" 415.048339 16" 475.048340 18" 540.048341 20" 590.048342 24" 700.0

DIN

Part Number

Nominal Diameter

Disc Diameter (mm)

Series Pressure Group (Bar)

48311 DN 10 40.0 6, 10, 16, 25, 40, 6448312 DN 15 45.0 6, 10, 16, 25, 40, 6448313 DN 20 58.0 6, 10, 16, 25, 40, 6448314 DN 25 68.0 6, 10, 16, 25, 40, 6448315 DN 32 78.0 6, 10, 16, 25, 40, 6448316 DN 40 88.0 6, 10, 16, 25, 40, 6448317 DN 50 102.0 6, 10, 16, 25, 40, 6448318 DN 65 122.0 6, 10, 16, 25, 40, 6448319 DN 80 138.0 6, 10, 16, 25, 40, 6448320 DN 100 158.0 6, 10, 16, 25, 40, 6448321 DN 125 188.0 6, 10, 16, 25, 40, 64, 100, 16048322 DN 150 212.0 6, 10, 16, 25, 40, 64, 100, 16048323 DN 200 268.0 6, 10, 16, 25, 40, 64, 100, 160

EXTENDED RANGE

Type 3

85

H

D

d2

d1

dh

Part Number

Nominal Diameter


Dimensions (mm)

d h34284

DN 17510,16 315.0 21.0

31917 25 330.0 25.034285 40 350.0 29.031916

DN 200

6 320.0 17.032310 10, 16 340.0 21.034314 - 340.0 24.031651 - 340.0 32.034286 25 360.0 27.034288 40 375.0 31.034287

DN 250

6 375.0 19.034289 10 395.0 23.034315 - 395.0 28.032311 16 405.0 23.034290 25 425.0 29.034292 40 450.0 35.034291

DN 300

6 440.0 18.031922 10 445.0 22.034316 - 445.0 30.032312 16 460.0 24.031874 25 485.0 30.034295 40 515.0 38.032320

DN 35010 505.0 22.0

34296 16 520.0 26.034297

DN 400

6 540.0 18.032321 10 565.0 22.034299 16 580.0 28.032276 25 620.0 36.032278 40 660.0 46.032322

DN 500

10 670.0 24.032281 16 715.0 30.032282 25 730.0 40.031942 40 749.3 46.032307 DN 600 16 840.0 31.0

Part Number DIN Nominal

BoreDimensions (mm) Std

Pack Qtyd2 d1 D H43975 DN 10 3⁄8" 7.0 14.1 86.0 15.4 70043976 DN 15 1⁄2" 9.1 19.2 90.0 16.1 50043977 DN 20 3⁄4" 14.3 24.0 100.0 21.1 35043978 DN 25 1" 18.4 29.9 110.0 21.0 60043979 DN 32 11⁄4" 22.5 39.1 136.0 20.0 60043980 DN 40 11⁄2" 30.0 45.0 146.0 21.0 40043981 DN 50 2" 40.0 56.0 160.0 20.3 30043982 DN 65 21⁄2" 53.0 72.0 181.0 20.5 20043983 DN 80 3" 67.0 85.0 195.0 24.7 15043984 DN 100 4" 90.0 109.25 217.0 23.6 10043985 DN 125 5" 111.0 134.0 246.0 26.1 7043986 DN 150 6" 139.5 164.0 280.0 32.2 5043987 DN 200 8" 187.0 208.6 336.0 33.5 2543988 DN 250 10" 244.0 266.0 403.0 35.6 1543989 DN 300 12" 284.0 319.0 450.0 48.5 10

Part Number

Nominal Diameter


Dimensions (mm)

d h34278

DN 106 75.0 10.0

34281 25, 40 90.0 14.034279

DN 15

6 80.0 10.034282 10, 16 95.0 12.0

110318* 25, 40 95.2 14.234301 - 95.0 16.0

110317*DN 20

6 90.0 12.031996 10, 16 105.0 14.032259 25, 40 105.0 16.0

110319*DN 25

6 100.2 12.231967 10, 16 115.0 14.032260 25, 40 115.0 16.032261

DN 32

6, 10 120.0 12.031968 - 140.0 14.032264 16 140.0 16.034303 25, 40 140.0 18.032262

DN 40

6 130.0 11.032265 10, 16 150.0 13.0

110322* - 150.5 15.031969 - 150.5 15.034304 25, 40 150.0 17.032263

DN 506 140.0 11.0

32267 10, 16 165.0 15.031970 25, 40 165.0 17.032266

DN 656 160.0 11.0

31971 10, 16 185.0 15.032268 25, 40 185.0 19.032269

DN 80

6 190.0 13.031972 10, 16 200.0 17.032270 25, 40 200.0 21.034306 - 200.0 24.032271

DN 100

6 210.0 13.031973 10, 16 220.0 17.034307 - 220.0 21.034308 - 220.0 24.032272 25, 40 235.0 21.032273

DN 125

6 240.0 15.031921 10, 16 250.0 19.031652 - 250.0 25.032275 25, 40 270.0 23.032274

DN 150

6 265.0 15.031915 10, 16 285.0 19.034310 - 285.0 22.034311 - 285.0 24.034312 - 285.0 29.034283 25, 40 300.0 25.0

Flange Protection

UK EXPRESS

Full-Face Flange ProtectorsSR 1365

Yellow LDPE

• Flexible fins ensure snug fit into bores

• For flanges to DN 2627-2638,150, BS5504 and ANSIB16, 5

Flange CoversSR 1353

Yellow Flexible Polyethylene


DIN

• Ideal for protecting internally-coated flanges

• Provide complete all-round flange protection

• Cover ANSI B 16.5, DIN 2631-2635 and BS4504

• Easy to fit

• Durable and flexible

• Also protect bolt holes

• Suit all types of flange faces

* Injection-moulded flange cover

86

dh

Part Number

Nominal Diameter

Series Pressure Group (lbs)

Dimensions (mm)

d h31870

8"

150 342.9 28.434321 - 343.0 33.031871 300 381.0 41.132298 600 419.1 55.632299 900 469.9 63.534323 1500 479.0 93.034324 2500 551.0 111.031872

10"

150 406.4 30.231873 300 444.5 47.732300 600 508.0 63.532303 900 546.1 69.831874

12"

150 485.0 30.031875 300 520.7 50.832301 600 558.8 66.532302 900 609.6 79.231876

14"

150 533.4 35.131847 300 584.2 53.834268 600 603.3 69.934269 900 641.3 85.831877

16"

150 596.9 36.631878 300 647.7 57.134270 600 685.8 76.234271 900 704.8 88.931879

18"

150 635.0 39.631880 300 711.2 60.434272 600 743.0 82.634273 900 787.4 101.631881

20"

150 698.5 42.931882 300 774.7 63.534274 600 812.8 88.934275 900 857.2 107.931942 22" 150 749.3 46.031943

24"

150 812.8 47.832088 300 914.4 69.834276 600 930.0 98.034277 900 1041.4 139.7

Part Number

Nominal Diameter


Dimensions (mm)

d h31836

1⁄2"

150 88.9 11.2110318* 300/400/600 95.2 14.2

31963 300/400/600 95.2 14.234258 900/1500 120.6 22.331837

3⁄4"150 98.6 12.7

31965 300/400/600 117.3 15.731896 900/1500 130.0 25.4

110320*1"

150 108.0 14.231938 300/400/600 124.0 17.531891 900/1500 149.3 28.431965 3⁄4"

300/400/600 117.3 15.734260 300/400/600 133.4 19.0

110321*

11⁄2"

150 127.0 17.531793 150 127.0 17.531886 300 155.4 20.632284 400/600 155.4 22.431892 900/1500 177.8 31.7

110323*

2"

150 152.4 19.131791 150 152.4 19.1

110324* 300 165.5 22.531783 300 165.5 22.532285 400/600 165.1 25.432293 900/1500 215.9 38.132313

21⁄2"150 177.8 22.4

31888 300 190.5 25.431890 400/600 190.5 28.431766

3"

150 190.5 23.931867 300 209.5 28.432286 400/600 209.5 31.832294 900 241.3 38.134319 1500 270.0 51.534262

31⁄2"150 215.9 23.9

34263 300 228.6 30.234264 400/600 228.6 35.131763

4"

150 228.6 23.931868 300 254.0 31.732287 600 273.1 38.132291 900 292.1 44.434322 2500 356.0 76.034265

5"150 254.0 23.9

34266 300 279.4 35.034267 600 330.2 44.531760

6"

150 279.4 25.431869 300 317.5 36.532296 600 355.6 47.831647 900 381.0 55.6

Free samples

UK EXPRESS

Flange Covers CONTINUED

SR 1353

ANSI ANSI continued

* Injection-moulded flange cover

87

Part Number

Nominal Diameter

Dimensions (mm)Std

Pack QtyCable Tie Part No.Outside

DiameterBolt Circle Diameter

Bolt Hole Size

491814 DN 10 90.0 60.0 14.0 50 460223491815 DN 15 95.0 65.0 14.0 50 460223491816 DN 20 105.0 75.0 14.0 50 460223491817 DN 25 115.0 85.0 14.0 50 460223491818 DN 32 140.0 100.0 18.0 50 460223491819 DN 40 150.0 110.0 18.0 50 460223491820 DN 50 165.0 125.0 18.0 50 460223492149 DN 65 185.0 145.0 18.0 50 460223492150 DN 80 200.0 160.0 18.0 50 460223492151 DN 100 235.0 190.0 22.0 50 460223492152 DN 125 270.0 220.0 26.0 25 460223492153 DN 150 300.0 250.0 26.0 25 460223492154 DN 200 360.0 310.0 26.0 25 460224492155 DN 250 425.0 370.0 30.0 25 460224492156 DN 300 485.0 430.0 30.0 25 461183492157 DN 350 555.0 490.0 33.0 10 461183492158 DN 400 620.0 550.0 36.0 10 461183492159 DN 500 730.0 660.0 36.0 10 461184492160 DN 600 845.0 770.0 36.0 10 461184

Part Number

Nominal Diameter

Dimensions (mm)Std



Bolt Hole Size


Part Number

Nominal Diameter

Dimensions (mm)Std



Bolt Hole Size


Part Number

Nominal Diameter

Dimensions (mm)Std



Bolt Hole Size


Flange Protection

UK EXPRESS

Flange Protection DiscSR 1172

PolyCor™ Corrugated LDPE

• Provides simple, cost-effective protection for flanges

• Covers full flange face - applied by strapping cable ties through bolt holes

• Wide range covers variety of sizes and pressure ratings

• DIN Flanges DN 10 to DN 600 - Pressure Groups PN 6, 10, 16, 25 and 40

• ANSI Flanges 1⁄2" to 32" - Pressure Groups 150, 300, 600 and 900 lbs

DIN - PN 6 Range DIN - PN 10 Range

DIN - PN 16 Range DIN - PN 25 Range


88

Part Number

Nominal Diameter

Dimensions (mm)Std



Bolt Hole Size

491814 DN 10 90.0 60.0 14.0 50 460223491815 DN 15 95.0 65.0 14.0 50 460223491816 DN 20 105.0 75.0 14.0 50 460223491817 DN 25 115.0 85.0 14.0 50 460223491818 DN 32 140.0 100.0 18.0 50 460223491819 DN 40 150.0 110.0 18.0 50 460223491820 DN 50 165.0 125.0 18.0 50 460223492149 DN 65 185.0 145.0 18.0 50 460223492150 DN 80 200.0 160.0 18.0 50 460223492151 DN 100 235.0 190.0 22.0 50 460223492152 DN 125 270.0 220.0 26.0 25 460223492153 DN 150 300.0 250.0 26.0 25 460223492161 DN 200 375.0 320.0 30.0 25 460224492162 DN 250 450.0 385.0 33.0 25 461183492163 DN 300 515.0 450.0 33.0 10 461183492164 DN 350 580.0 510.0 36.0 10 461183492165 DN 400 660.0 585.0 39.0 10 461184492166 DN 500 755.0 670.0 42.0 10 461184

Part Number

Nominal Diameter

Dimensions (mm)Std



Bolt Hole Size

491727 1⁄2" 95.3 66.7 15.9 50 460223491728 3⁄4" 117.5 82.6 19.1 50 460223491729 1" 123.8 88.9 19.1 50 460223491730 11⁄4" 133.4 98.4 19.1 50 460223491731 11⁄2" 155.6 114.3 22.2 50 460223491732 2" 165.1 127.0 19.1 50 460223491733 21⁄2" 190.5 149.2 22.2 50 460223491734 3" 209.6 168.3 22.2 50 460223491735 31⁄2" 228.6 184.2 22.2 50 460223491736 4" 254.0 200.0 22.2 50 460223491737 5" 279.4 235.0 22.2 25 460223491738 6" 317.5 269.9 22.2 25 460223491739 8" 381.0 330.2 25.4 25 460224491740 10" 444.5 387.4 28.6 25 460224491741 12" 520.7 450.9 31.8 10 460224491742 14" 584.2 514.4 31.8 10 461183491743 16" 647.7 571.5 34.9 10 461183491744 18" 711.2 628.7 34.9 10 461183491745 20" 774.7 685.8 34.9 10 461183491746 22" 838.2 743.0 41.3 10 461184491747 24" 914.4 812.8 41.3 10 461184491748 26" 971.6 876.3 44.5 10 461184491749 28" 1035.1 939.8 44.5 10 461184491750 30" 1092.2 997.0 47.6 10 461185491751 32" 1149.4 1054.1 50.8 10 461185491752 34" 1206.5 1104.9 50.8 10 461185

Part Number

Nominal Diameter

Dimensions (mm)Std



Bolt Hole Size

491700 1⁄2" 88.9 60.3 15.9 50 460223491701 3⁄4" 98.4 69.9 15.9 50 460223491702 1" 108.0 79.4 15.9 50 460223491703 11⁄4" 117.5 88.9 15.9 50 460223491704 11⁄2" 127.0 98.4 15.9 50 460223491705 2" 152.4 120.7 19.1 50 460223491706 21⁄2" 177.8 139.7 19.1 50 460223491707 3" 190.5 152.4 19.1 50 460223491708 31⁄2" 215.9 177.8 19.1 50 460223491709 4" 228.6 190.5 19.1 50 460223491710 5" 254.0 215.9 22.2 50 460223491711 6" 279.4 241.3 22.2 25 460223491712 8" 342.9 298.5 22.2 25 460223491713 10" 406.4 362.0 25.4 25 460223491714 12" 482.6 431.8 25.4 25 460223491715 14" 533.4 476.3 28.6 10 460223491716 16" 596.9 539.8 28.6 10 460224491717 18" 635.0 577.9 31.8 10 460224491718 20" 698.5 635.0 31.8 10 460224491719 22" 749.3 698.5 34.9 10 460224491720 24" 812.8 743.0 34.9 10 460224491721 26" 870.0 806.5 34.9 10 460224491722 28" 927.1 863.6 34.9 10 460224491723 30" 984.3 914.4 34.9 10 461183491724 32" 1060.5 977.9 41.3 10 461183491725 34" 1111.3 1028.7 41.3 10 461183491726 36" 1168.4 1085.9 41.3 10 461183

Quote / sample / order online

UK EXPRESS

Flange Protection Disc CONTINUED

SR 1172

DIN - PN 40 Range

ANSI - 150 lbs Range


Cable ties fastened through bolt holes secure disc to flange

89

Part Number

Nominal Diameter


43607* 1⁄2" 15034352 1⁄2" 300/600

43608* 3⁄4" 15034353 3⁄4" 300/600

43609* 1" 15034354 1" 300/60034343 11⁄4" 15034355 11⁄4" 300/600

43610* 11⁄2" 15034356 11⁄2" 300/600

43611* 2" 15039701 2" 300/600

43612* 21⁄2" 14034358 21⁄2" 300/600

43613* 3" 15034359 3" 300/600

43614* 4" 15034361 4" 300

43615* 6" 15034362 6" 300

43616* 8" 15043617* 10" 15043618* 12" 150

Part Number

Nominal Diameter


34371 1⁄2" 300034372 3⁄4" 300034382 3⁄4" 600034373 1" 300034383 1" 600034374 11⁄4" 300034384 11⁄4" 600034375 11⁄2" 300034385 11⁄2" 600034376 2" 300034386 2" 600034377 21⁄2" 3000

Part Number

Nominal Diameter

Dimensions (mm)Std



Bolt Hole Size

491770 1⁄2" 120.7 82.6 22.2 50 460223491771 3⁄4" 130.2 88.9 22.2 50 460223491772 1" 149.2 101.6 25.4 50 460223491773 11⁄4" 158.8 123.8 25.4 50 460223491774 11⁄2" 177.8 123.8 28.6 50 460223491775 2" 215.9 165.1 25.4 50 460224491776 21⁄2" 244.5 190.5 28.6 50 460224491777 3" 241.3 190.5 25.4 50 460224491778 4" 292.1 235.0 31.8 25 460224491779 5" 349.3 279.4 34.9 25 461183491780 6" 381.0 317.5 31.8 25 461183491781 8" 469.9 393.7 38.1 25 461183491782 10" 546.1 469.9 38.1 10 461183491783 12" 609.6 533.4 38.1 10 461184491784 14" 641.4 558.8 41.3 10 461184491785 16" 704.9 616.0 44.5 10 461185491786 18" 787.4 685.8 50.8 10 461185491787 20" 857.3 749.3 54.0 10 461186491788 24" 1041.4 901.7 66.7 10 461188491789 26" 1085.9 952.5 73.0 10 461189491790 28" 1168.4 1022.4 79.4 10 461190

Part Number

Nominal Diameter

Dimensions (mm)Std



Bolt Hole Size

491727 1⁄2" 95.3 66.7 15.9 50 460223491728 3⁄4" 117.5 82.6 19.1 50 460223491729 1" 123.8 88.9 19.1 50 460223491730 11⁄4" 133.4 98.4 19.1 50 460223491731 11⁄2" 155.6 114.3 22.2 50 460223491732 2" 165.1 127.0 19.1 50 460223491733 21⁄2" 190.5 149.2 22.2 50 460223491734 3" 209.6 168.3 22.2 50 460223491753 31⁄2" 228.6 184.2 25.4 50 460223491754 4" 273.1 215.9 25.4 25 460224491755 5" 330.2 266.7 28.6 25 460224491756 6" 355.6 292.1 28.6 25 460224491757 8" 419.1 349.3 31.8 25 461183491758 10" 508.0 431.8 34.9 25 461183491759 12" 558.8 489.0 34.9 10 461183491760 14" 590.6 527.1 38.1 10 461183491761 16" 685.8 603.3 41.3 10 461184491762 18" 743.0 654.1 44.5 10 461184491763 20" 812.8 723.9 44.5 10 461185491764 22" 870.0 777.9 44.5 10 461185491765 24" 939.8 838.2 50.8 10 461185491766 26" 1016.0 914.4 50.8 10 461186491767 28" 1073.2 965.2 54.0 10 461186491768 30" 1130.3 1022.4 54.0 10 461187491769 32" 1193.8 1079.5 60.3 10 461187

Flange Protection

UK EXPRESS

SAE High-Pressure Flange ProtectorsSR 1076

Polyethylene

Flange ProtectorsSR 1355

Black LDPE

3000 Series - Blue, 6000 Series - Red

* Variations in style - give protection to flange face and area surrounding bolt holes.

Flange Protection Disc CONTINUED

SR 1172



Documents

Pipe and Flange Protection - Metalika Kacin · 2012. 7. 6. · 76 Protect! Pipe and Flange Protection Moss offer a wide range of Plastic Protection Products for pipes and flanges