Pinouts.ru - MouseSerialPs2_pinout

Embed Size (px)

Citation preview

  • 7/31/2019 Pinouts.ru - MouseSerialPs2_pinout

    1/1

    bookmark this page

    Source(s) of this and additional information: Hardware Book, Tomas Ogren, Thomas Eschenbacher

    [Discuss at the forum] [Back to index] [SUBMIT new pinout]This page contain parts under Copyright 2000-2010 by pinouts.ru team.

    No portion of this webpage may be reproduced in any form without providing visible HTML link to pinouts.ru . Webmaster permission required in anyother cases.

    Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.40014 hits since March 4, 2005

    Serial to PS/2 Mouse adapter connector pinout connector or cable wiring scheme

    9 pin D-SUB

    male connectorat the mouse

    This adapter will enable you to use a mouse with a 9 pin D-SUB(Serial) connector to a computer with a 6 pin Mini-DIN (PS/2)connector. This requires that the mouse handles both protocols.A mouse like this is sometimes referred to as a combo-mouse.

    The Serial Mouse uses a RS-232 style interface with -5 to -12 VDC as

    logical 1 and +5 to +12 VDC as logical 0. The PS/2 mouse interface is a

    TTL-style interface, which uses 0 - +2 VDC as logical 0 and +3 - +5

    VDC as logical 1.

    In addition - and to make things worser - the RS-232 is an

    asynchronous interface, the PS/2 interface is a synchronous, where the

    data is sent along with a clock signal. It uses a simplified 4-wires serial

    interface with +5VDC (for the transceiver), GND, keyboard / mouse

    clock and keyboard / mouse data. The data and clock line can be used

    from the keyboard / mouse controller and the attached device as well

    following a particular handshake, which defines which is the active

    sender and which is the receiver. So: it is not *that* easy conversing

    serial mouse to PS/2 and vice versa.

    The dual mode mice have an automatic logic detection and sort of

    adaptive interface electronic, which detects whether the mouse is

    attached to a serial port or a PS/2 port and set the output drivers

    accordingly.

    Want to add or correct something here?Edit this page!

    Mini-DIN D-SUB+5V 4 4+7+9 DTR+RTS+RI

    Data 1 1 CD

    Gnd 3 3+5 TXD+GND

    Clock 5 6 DSR

    6 pin mini-DIN male (PS/2

    STYLE) connectorat the computer

    Related pinouts:

    PC serial port RS232pinout

    Mouse (PS/2)

    This information should be correct, but we are not sure about it. Please, help us to improve this page!Mark this document as a CORRECT or an INCORRECT. Your opinion will be used to estimate document status (showed at the bottom).

    Pinouts.ru > Keyboard, Mouse and other input devices cables and adapters schemes > Pinout of Serial to PS/2 Mouseadapter and layout of 9 pin D-SUB male connector and 6 pin mini-DIN male (PS/2 STYLE) connector. Is this documentcorrect or incorrect?

    Is it correct?:should

    becorrect

    1 commentsLast updated 2010-04-24 19:48:50. Edit this page.

    Looking forMolex?Universal serialbus on limitedoffer price atelement14, for alimited time onlyin.element14.com/univ

    Ads by Google USB RCA Connector Cable Connector Serial Port Pinout RS232 Connector

    Page 1 of 1Serial to PS/2 Mouse adapter pinout and wiring @ pinouts.ru

    3/9/2011http://pinouts.ru/InputCables/MouseSerialPs2_pinout.shtml