We are offering subject to prior sale:

PICANOL RAPIER LOOMS Item 004666 22 Picanol GTM -AS looms, 1992/93, 190 cm, 4 colours, with Stäubli electronic dobby type 2612, microprocessor controlled, each loom with 2 feeders IRO Laser, 6 heald frames, 4000 heddles and droppers, 1.5 warp beams and cloth rollers, small grippers.

SIZING AND WARPING Item 004662 1 Sucker Moenus Sizing and Warping line, built 2003/2004, comprising: 1 Sucker Moenus Direct warper NZB-D 1000, built 2003 working width 1800 mm, max. beam diam. 1000 mm 1 Sucker Creel with 640 positions, pneumatic disc brakes 45 Beams 1 Sucker Moenus Sizing machine: Headstock WE-10 PC, built 2004, max. width 3200 mm with Simatic OP17 and Laserstop, waxing device 1 Size Box SC-50, built 2004, Wetsizing, Cylinder Dryer ZM-10, built 2003, 10 cylinders, 6 x Teflon, 4 x Steel Beam Creel for 20 beams (5x4) with pneumatic brakes 1 Sizing kitchen: 1 Cooker and 1 Tank, complete with Panels Suitable for Cotton / Cotton-Viscose / Cotton-PES Tex 14-60 excellent condition

Item#00 1 BENNINGER WARPING & SIZING 1 Benninger Bendirect 1250 Warper year 1998, 30 beams flange diam. 1250mm, width 2200mm, suitable for natural and synthetic fibre. Warping command 18,5 kW with 1500 rpm., max. warping speed 1200 m/min. Net tension (phase-phase): 3x400 V + 6% - 10%. 50 Hz, 3 phases. Compressed air consumption min. 5 bar 0,2 m3/h. Disk brakes (hydraulic pressure) on both sides of the beam. Undirect pressing system, the pressure is adjustable up to 2000 to 6000N. Momentary lifting of the pressing roll at machine stop (Kick-back). Reed-support for insta llation of an extensible zig-zag reed (50mm segments, agjustable for 657-460 yarns) for a precise yarn-threading. Impulse-blowing from the compressed air network. Crossed yarns separating device. Production data recording for six shifts with the following characteristics: warp length, number of warp beams, number of yarns per beam, number of the shift. On-board Printer. Filaccumulator yarn accumulator, max capacity 7 meters. BEN-VAC aspiration system. BEN-SENS V-creel, model GE, 640 positions in work, 680 reserve, tota l 1320 pos. Bobbins at 5 levels, max diam 305mm with a minimum distance between bobbins 5mm, vertical gauge 435mm. Count from 50 to 500 dtex. Integrated e lectronic optical device for yarn tensioning, digita l indicator of number of yarns in work, indication of broken yarn. Automatic pre-tensioners.

1 Benninger Bensizetec Sizing Range model BEN -SIZETEC ZA20 2KAV/TD CT 4/4/6 BB 2200/4000, YOC 1999. Composed of: Benninger beams creel model ZA20 for 20 fractional beams each width 2200mm (flange to flange), max flange diam 1250mm, with air pneumatic braking system. Unwinding tension 150N for beam with flange diam 1250mm, 160N for beam with flange diam 1000mm at the air pressure of 6 bar. Ferber beam-loading-unloading carrier with on-floor rails. 2 electronic drafting force measuring systems model MW. 1 water pre-wetting tank, with: feeding group with 1 stainless steel cilinder, 1 rubber-covered cylinder, 1 chromed cylinder, 2 sections tank, max water temperature 90°C, each section capacity 300 l. Squeezing system at the exit of each section. BENNINGER size boxes model TD, cylinders width 2400mm, working width 2200mm, each box with 2 pairs of squeezing cylinders and 1 immersion cylinder, adjustable squeezing pression up to 5.000 daN (kgf), pneumatic device for pressure and lifting of the cylinder, Automatic regulation of squeezing pressure by BEN-SIZETEC system. Automatic size feeding device. HANDYMAT sizing box control system with display. Wet separating fie ld for impregnating box for separation of the warp in two layers, with 1 teflon-covered steam-heated measuring cylinder and 1 teflon-covered steam-heated deviating cylinder. 1 Benninger compact dryer type CT4/4/6, 14 drying cylinders width 2400mm (4+4+6), 10 of them tefloned, diam 800mm. Saturated steam 3,5 bar, max temperature 147°C. 5 electronic temperature regulations; command by means of 3 phases motor and inverter. Standard hooder with 2 fans. CV oiling and waxing device at the exit. MAHLO humidity control and regulation. Dust suction and filtering system. Dry separating field 6,5 meters length, with 19 chromed leasing positions. 1 Benninger high productive headstock/beaming model BB, width 4600mm, max working width 4000 mm, suitable for beams up to max flange diam 1100 mm, speed from 0,4 to 125 m/min, chain tension 1500 daN, inverter control, extensible reed. Computerized microprocessor automatic control system, PC and modem. Siemens Simatic PC FI15 software with monitor. Size kitchen model SIZEMEIX 1200, capacity

1400 l, working capacity 1200 l, with automatic temperature regulation system, water counter. 2 storage tanks model V1300, working capacity 1300 lt each 1000 lt capacity each, temperature regulation.

SECTIONAL WARPERS Item#004564

1 BENNINGER SECTIONAL WARPER, TYPE BEN -MATIC YEAR OF CONSTRUCTION 1996 CONE RATIO : 1 : 5 WARPING WIDTH 2200 MM MAX WARPING SPEED 800 M/MIN EGALIZING ROLLER ANTISTATIC DEVICE WAXING DEVICE BEAMING MACHINE WIDTH 2200 MM PRESSING DEVICE MAX 10 BAR MAX BEAMING SPEED 220 M/MIN MAX WARP BEAM FLANGE DIA 1000 MM WAXING DEVICE TYPE “C” – WITHOUT PUMP LEASE 640 x 2 WITH : 1 BENNINGER CONE CREEL TYPE GS / UB YEAR OF CONSTRUCTION 1989 624 SPINDLES – 6 DECKS –PITCH 300 / 300 MM 2 FANS YARN CONTROL GFAg 624 PRE-TENSIONERS The Creel tensioner device modified during the year 1996. The factory was running up to Ne 100 on this machine, cotton 100%. The creel is sensitive for fine counts cotton yarns and for dyed yarns.

ACCESSORIES - AUXILIARIES Item#004604 - ROJ WEFT FEEDERS 18 weft accumulators ROJ Quartz 29 weft accumulators ROJ AT1200

14 e lectrical panel with 4 - 8 plugs, suitable for ROJ AT1200 and ROJ Quartz weft feeders almost new cone stands and stands for weft feeders and boxes. All devices complete, in very good working condition, from a german factory.

Item#004633 4 Knotting machines, make Fischer Poege, type PU and FA, with frame and accessories 200 HEALD FRAMES nearly new - in top condition suitable for 190 cm GTM, GTM-A, GTM-AS, GTX

* Additionally we can offer 200 almost new Heald Frames for Picanol GTM -A/AS Rapier looms, several transport devices for c loth rollers and warp beams, oil c leaning devices, etc.

Sample loom

New Xtema Spare parts (Made in Europe) for: Sulzer - Dornier - Rieter – Schlafhorst

ww w.xtema.de