© D

igita

l Spo

rts

Phot

ogra

phy/

Volle

ybal

l Can

ada

As a trusted sports equipment manufacturer, SA Sport produces reliable, high quality gymnastics, development and volleyball equipment that enhances and compliments athletic development at all levels.

And, we’ve been doing it for over 40 years!

Our commitment to product performance, continuous improvement and innovation lets coaches and athletes focus on reaching their personal best.

SA Sport is proud to be the Offi cial Indoor Net System of Volleyball Canada

© Photo Ventures/Volleyball Canada© Photo Ventures/Volleyball Canada

Products Built for Performance

Sales and Service135 Forestview Rd.P.O. Box 40Orillia, OntarioCanada L3V 6H9

Toll Free: 800.563.6479Phone: 705.325.2274Fax: 705.325.1485

sasportonline.com

© 2013 Spieth Anderson International Inc. All rights reserved. SA Sport makes every possible effort to ensure the accuracy of our print literature. However, errors can happen and we sincerely regret any inconvenience they may cause. If you notice an error, please bring it to our attention and we will have it corrected at the next printing. Printed in Canada 07/13

SA Sport is proud to be the Offi cial Indoor Net System of Volleyball Canada

We Are ConcernedAbout Your Safety Serious injuries including permanent paralysis can occur in volleyball and other net sports. Such injuries can be caused by falls on the neck, head and other parts of the body as a result of running into the standards or undercutting a teammate. While it cannot be eliminated, the risk of injury can be reduced by strictly following these rules at all times. Use standards only under the direct supervision of a qualifi ed instructor. Be alert to the potential hazards of the net and standards and avoid undercutting other players. Always keep fi ngers and hands away from the gear mechanism when adjusting net height or tension. The winch handle must be removed from the standard at all times when play is in progress.

Cable tension must always be released before adjusting net height. Failure to do so will cause permanent damage to gears. We recommend that two persons set-up and take down the standard. It is unstable and potentially dangerous until completely and properly installed into the fl oor socket. Under no circumstances should standards be stored leaning against a wall. Lay posts fl at or securely fasten with wall mount storage brackets or a storage rack designed specifi cally for this purpose. Test stability of standards before each use. Always inspect for loose fi ttings, damage and proper positioning before each use. Replace any worn, defective or missing parts. If in doubt do not use the equipment.

Steel | Aluminum | Spike | Floor Sockets

Wall Padding | Accessories | Badminton

Volleyball Systems

SA_Sport_2013_Volleyball_Catalog_FINAL.indd 2-3 7/2/13 11:14 PM

320 Steel Volleyball System

Volleyball Posts & Systems

300EW

300EH

300CP

End Posts with Winch

End Posts with Hooks

300 Complete System

320EW

320EH

320CP

End Posts with Winch

End Posts with Hooks

320 Complete System

Highly Functional, Steel Volleyball System OfferingTop Quality Performance at a Very Attractive Price!The 320 Steel Volleyball system is made of 3” Outside Diameter (O.D.) heavy duty steel for maximum strength and can be easily converted to a multi-court system. Posts have an internal spring assist mechanism making for fast and effortless height adjustments and include Men’s and Women’s height indicators.

Get All of the Outstanding Performance Features of our SteelSystem with the Added Bonus of Lightweight Aluminum

Other details include:

• Inner post chromed with aluminum pulley and low profi le pulley wheel that helps prevent breakage

• Infi nite height adjustment between 6’ 9 1/2”- 8’ 6”

• Telescoping tubes are quickly and securely locked into position with an exclusive “T” locking handle

• Self-locking external winch, combined with the patented slide lock tensioners on the net side bands, provides even tension over the entire net surface

• Tension adjustment is smooth and controlled

• Posts are shipped with a net leader belt system securely assembled to the winch allowing you to quickly and safely attach or remove the net without having to unravel the entire cable system (extra cable length supplied)

• 3” Inside Diameter (I.D.) Floor Sockets Required for 320 & 300 Posts. Posts can be used with Hinged Cap Floor Sockets (209) or Floating Floor Sockets

(214VB)

The 300 Aluminum Volleyball system is manufacturedwith high strength, anodized aluminum extrusions for ease of set-up and storage, and can easily convert to a multi-court system.

300 Aluminum Volleyball System

Complete Package Includes:

• Two (2) End Posts - one winch, one hook

• Two (2) Floor Sockets

• One (1) International Regulation Net

• One (1) Pair Post Padding

• One (1) Pair Net Antennae with Velcro Support Tube

With just one product number, you can order acomplete single court package in the system of yourchoice. Just look for the “CP” in the product number.

Please specify your socket type requirement(fl oating or non-fl oating) and post paddingcolour choice with your order (see page 5 forvinyl colour options).

SA SportComplete Volleyball Systems

Refer to page 9for Floor Socket information

sasportonline.com sasportonline.com 1.800.563.6479 32

SA_Sport_2013_Volleyball_Catalog_FINAL.indd 4-5 7/2/13 11:14 PM

Wall Padding

Port

able

and

Rec

reat

iona

l Sys

tem

s

Take the Impact!

Extend optimum protection in your gymnasium with wall padding from Canada’s leadingand most trusted sports equipment manufacturer.

Padding thickness and foam quality are critical to safety, performance and longevity in wall padding. The ability of the foam to absorb impact and resist long term fatigue failure must be considered. It is crucial for foam to be able to “take the impact”, recover, then take additionalrepeated impacts. With a product required to have an expected life of ten years or more, the foam must be able to withstand thousands of impacts and still retain its protective properties. SA Sport wall padding meets the challenge!

A full 3” polyurethane foam cushions and absorbs impact. The foam is covered with fi re retardant, 18 oz. PVC vinyl. Padding is mounted to a 1/4” plywood back.

Standard Wall Padding is 6’ H x 4’ W. Custom lengths aswell as cut outs can be designed to fi t your space and needs.

Wall Padding

School or team logos and insignias can be painted on Wall Padding, Post Padding or Referee Platform Padding to your specifi cations. Many vinyl colours are available and paint is generally available in colours of your choice allowing you to duplicate your school colours. Email us a school crest or logo illustrating your emblem and our artist will reproduce it for you.

School & TeamColours and Logos Vinyl Colour Options

Port

able

and

Rec

reat

iona

l Sys

tem

s

Spike Recreational Posts

227

227CP

Spike Post (each)

Spike Recreational Package

Includes:

• One (1) pair of Spike Posts

• One (1) Tournament Net

• One (1) pair of Wall Mount Storage Brackets

Spike™ is Made for Recreation, yet Built for Performance!

Designed for fun and function, the Spike volleyball system is a recreational volleyball system that’s safe, durable and affordable. No winches or outriggers, Spike is made of 1.9” Outside Diameter (O.D.) steel and safe and easy to store. Spike™ is great for volleyball and badminton. 1 7/8” Inside Diameter (I.D.) sockets required for Spike Posts.

Always ready to play.

Professional Level, Portal Volleyball Posts – Ideal For Tournament Use

Rolling Volleyball System

Vinyl colours may not be exactly as shown.Swatches available upon request.

The 320P Rolling Volleyball System offers an all inclusive portable post solution complete with stand, volleyball posts, wheels, counter-weights and padding. The stands come with spring-loaded posts based on the 320 Steel Volleyball Post design. The counter-weights ensure posts will not move from net tension and the padding helps protect the athletes.

Front wheel comes off the fl oor when post is put in theupright position. This allows rubber pads to hold post in place. When post is unlocked and pulled back, the wheels raise the unit for easy transport.

One side has a referee’s platform and step built in (shown).

320P Rolling Volleyball System

161 Wall Padding

sasportonline.com sasportonline.com 1.800.563.6479 54

SA_Sport_2013_Volleyball_Catalog_FINAL.indd 6-7 7/2/13 11:14 PM

AccessoriesManufactured with durable 18 oz. vinyl

and shock absorbing 1 1/4” polyethylene foam. Padding securely wraps around steel tubing.

221F

Free StandingReferee Platform

207

Free StandingReferee Platform Padding

• Manufactured with durable 18oz. vinyl and shock absorbing 1 1/4” polyethylene foam

• Padding wraps around the standard and is secured with velcro tabs. Padding covers all protruding parts of the post

• Center Post Padding is manufactured in two sections, both secured with velcro tabs to allow nets to extend in both directions from the post

Post Padding219

219C

Post Padding

Center Post

• Extremely fi rm and stable surface and a larger area for coaching movement

• Block is constructed of high density polyurethane reinforced with polyethylene for maximum support

• 24” W x 60” L x 20” H

• Blue Vinyl

CSB-1

Coaches Block

See page5 for colour optionsWhen ordering, please provide colour choice

• Constructed of steel tubing with non-marking castors

• Will hold up to 6 volleyball or badminton posts

• Measures approximately 26” W x 59” L x 30” H

220

Post Storage Rack

© Digital Sports Photography/Volleyball Canada

Free Standing Referee Platform is portable and can be used with any of the SA Sport systems or for multi-sport use.

Other details include:

• Wheels on the base facilitate transport

• Rubber foot cups protect your gym fl oor

• Ergonomically designed foot rest

• Easily collapsed for storage

• Protective padding is optional (207)

• One (1) pair of posts is securely held in place

• Vertical or horizontal mount

237

Wall MountedStorage Brackets

sasportonline.com sasportonline.com 1.800.563.6479 76

SA_Sport_2013_Volleyball_Catalog_FINAL.indd 8-9 7/2/13 11:14 PM

Floor SocketsAcc

esso

ries

Comes complete with net leader belt system already attached to the winch, with extra cable length supplied should you need it, mounting hardware and crank handle

P201

Self-Locking Winch

Includes one piece volleyball antennae with DW approval. Complete with coated polyester pockets, boundary marker and velcro sleeve/pocket. 1.80m in length.

Quick and easy to use for setting up and checking net height. Ideally for tournament use.

239

Net Height GageH502

Net Antennae (pair)

The Net Butler is a convenient way to roll, hang and store your volleyball or badminton nets. (net sold separately)

238

Net Butler

H5034-05 Tournament Net

201-60 Winch with no hardware

H5088-06 International Regulation Net• Recommended for all fl oor types except fl oating fl oors

• 3.060” I.D. fl oor sockets

• Constructed of non-rusting, solid cast bronze with a steel fl oor sleeve

• Installed to a depth of 9.5” into concrete sub-fl oor

214VB

FloatingFloor SocketsVolleyball Nets

Our International Regulation Net includes the world renowned Huck® patented tension pulleys at each end of the top Kevlar cable, ensuring even tension over the entire area of the net. Additional precise alignment of the net to the court marking is also possible when the net is under tension. The 9.50m net is manufactured with knotless, high tenacity polypropylene, 4mm diameter and a 11.70m Kevlar top cable. The reinforcing top band is polyester/fi berglass. 6 position attachment, 6 tension cords with slide lock tensioners. Also includes a 70mm wide, white band along the top and a continuous 50mm wide white band along the bottom. Meets or exceeds international specifi cations.

Knotless volleyball tournament net in high tenacity Polypropylene, approximately 3mm diameter with Kevlar cable. Polyester band and glassfi bre reinforcement dowel, 4 positions attachment, 4 tension cords with slide lock tensioners.

If you are interested in purchasing SA Sport volleyball standards for your gymnasium facility, it is very important that our floor sockets are installed. This will ensure that the equipment will be fully compatible with the socket anchors and when properly installed, will greatly contribute to the safety and performance of the equipment.

Most equipment purchased by our customers occurs after gymnasium construction is complete. Often, existing floor sockets are not compatible with the equipment purchased and customers must incur great expense to upgrade their sockets. Greater communication between the equipment supplier, facility users, architectural firms and contractors prior to the construction stage would eliminate this problem.

NOTE: It is important to check the center to center distance between fl oor sockets before ordering your net. If your court layout does not meet offi cial regulation size (36’) your net may need to be modifi ed. SA Sport does not install sockets, but can provide you with companies who can. Contact us for further information.

An Important Message for Architects and Others Involved in New Gymnasium ConstructionQuick and easy to use for setting

up and checking net height. Ideally for tournament use.

© MPH Photography/Volleyball Canada

• Recommended for fl oating fl oors only

• Two piece unit to allow fl oating fl oors to move without damaging the fl oor

- 5” I.D. non-rusting, solid cast bronze top plate

- 3.060” I.D. steel fl oor sleeve

• Constructed of non-rusting, solid cast bronze with a steel fl oor sleeve

• Installed depths vary depending on fl oor construction and may effect the post height and net

Self-Locking Winch

Includes one piece volleyball antennae with DW approval. Complete with coated polyester pockets, boundary marker and velcro sleeve/pocket. 1.80m in length.

Net Antennae

209

HingedCap Floor Sockets

to roll, hang and store your volleyball or badminton nets.

sasportonline.com sasportonline.com 1.800.563.6479 98

SA_Sport_2013_Volleyball_Catalog_FINAL.indd 10-11 7/2/13 11:14 PM

Set Ups

Badm

into

n

211

231

Badminton Posts (each)

Portable Badminton Posts (pair)

Badminton Posts Huck® Net System

Volleyball Net Setup Instructions

Badminton Nets

Badminton Sockets

• 211 Badminton Posts are manufactured with 1.9” O.D. steel tubing for strengthened durability

• Height is quickly and easily adjusted by sliding an adjustable collar up or down the post

• Side cleats tightly secure the net ropes

• All posts come with hooks on both sides for use as end or center posts

• 231 Portable Post has identical features to the 211 Posts, except that floor sockets are not required. Portable Posts are not recommended for competition use.

• Wheels on the weighted base make it easy to move posts around your gym

• 6.02m x 76cm, Mesh size approx. 18mm

• Black 8m Kevlar tension cord

H6001-06

The floating floor top ring with drop-in cap allows floating floors to “move” without damaging the finished floor. The 5” I.D. top ring is non-rusting, solid cast bronze and fits into the top finished floor. The steel sleeve fits below the air space into the concrete sub-floor.

214B

Recommended for use with 211 Badminton posts. Sockets are constructed of a solid cast bronze top and steel sleeve. Approx. 1.9” I.D. installed to a depth of approx. 6 5/8”. For all fl oor types except fl oating fl oors.

170

• 6.10m x 76cm, Mesh size approx. 20mm - Black

• Reinforced with Nylon cord

H607-06

Training NetRegulation Net

Adaptor allows you to use your smaller diameter posts in your 3” volleyball socket. This steel sleeve insert accommodates a badminton post O.D. range of 1.9”- 2”.

169

Socket Insert Adaptor

1. Loop rope around volleyball pole.

2. Loop rope around cleat peg and pull until desired tension is reached.

3. Wrap rope all the way around the cleat peg and pull fi rmly.

4 While pulling rope tight, insert into cleat teeth to lock the system.

1. Place posts in fl oor sockets.

2. Adjust end post heights to either regulation men or women’s height.

3. Attach net rope to post hook at one end and to winch leader strap at other end ensuring that both cables are over pulleys.

4. Tighten winch until net height at centre court meets regulation height. Note: do not tighten winch past this point.

5. Tighten net straps at either end (See Huck Net system instruction above). Note: keep straps horizontal as possible.

6. Adjust end of net height to meet regulation height by adjusting position of net straps on post.

7. If there are ropes on the bottom of the net, tie them off to the end posts.

214B

170

169

sasportonline.com sasportonline.com 1.800.563.6479 1110

SA_Sport_2013_Volleyball_Catalog_FINAL.indd 12-13 7/2/13 11:15 PM