Philippine Bidding Documentsosg.gov.ph/documents/procurement/2018/ICTSubscriptio… · Web viewSuSE Linux Enterprise (10, 11, 12), Red Hat Enterprise Linux (5, 6, 7), Ubuntu (10.04

Republic of the Philippines

OFFICE OF THE SOLICITOR GENERAL134 Amorsolo St., Legaspi Village, Makati City

Tel. No. 9881-691; 836-3314/Telefax No. 813-1174

Procurement of ICT Subscriptions

(Lot 1, Lot 2, & Lot 3: OSG PR No. 018-10-368)

Terms of Reference

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

TABLE OF CONTENTS

SECTION I. INVITATION TO BID.......................................27

SECTION II. INSTRUCTIONS TO BIDDERS..............................29

SECTION III. BID DATA SHEET.......................................62

SECTION IV. GENERAL CONDITIONS OF CONTRACT....................67

SECTION V. SPECIAL CONDITIONS OF CONTRACT......................85

SECTION VI. SCHEDULE OF REQUIREMENTS...........................91

SECTION VII. TECHNICAL SPECIFICATIONS............................92

SECTION VIII. BIDDING FORMS.....................................113

CHECKLIST OF REQUIREMENTS......................................126

27

Section I. Invitation to Bid

28

29

Section II. Instructions to Bidders

30

TABLE OF CONTENTS

A. GENERAL.................................................................................................................................32

1. Scope of Bid..................................................................................................................................... 32

2. Source of Funds..............................................................................................................................32

3. Corrupt, Fraudulent, Collusive, and Coercive Practices...............................................32

4. Conflict of Interest........................................................................................................................ 34

5. Eligible Bidders..............................................................................................................................35

6. Bidder’s Responsibilities...........................................................................................................36

7. Origin of Goods...............................................................................................................................39

8. Subcontracts....................................................................................................................................39

B. CONTENTS OF BIDDING DOCUMENTS................................................................................39

9. Pre-Bid Conference...................................................................................................................... 39

10. Clarification and Amendment of Bidding Documents..................................................40

C. PREPARATION OF BIDS........................................................................................................41

11. Language of Bid..............................................................................................................................41

12. Documents Comprising the Bid: Eligibility and Technical Components..............41

13. Documents Comprising the Bid: Financial Component...............................................43

14. Alternative Bids............................................................................................................................. 44

15. Bid Prices.......................................................................................................................................... 44

16. Bid Currencies................................................................................................................................ 46

17. Bid Validity.......................................................................................................................................46

18. Bid Security......................................................................................................................................46

19. Format and Signing of Bids.......................................................................................................49

20. Sealing and Marking of Bids.....................................................................................................50

D. SUBMISSION AND OPENING OF BIDS.................................................................................50

21. Deadline for Submission of Bids.............................................................................................50

22. Late Bids............................................................................................................................................ 51

23. Modification and Withdrawal of Bids..................................................................................51

24. Opening and Preliminary Examination of Bids................................................................52

E. EVALUATION AND COMPARISON OF BIDS.........................................................................53

25. Process to be Confidential.........................................................................................................53

26. Clarification of Bids......................................................................................................................54

27. Domestic Preference....................................................................................................................54

31

28. Detailed Evaluation and Comparison of Bids...................................................................54

29. Post-Qualification..........................................................................................................................56

30. Reservation Clause....................................................................................................................... 57

F. AWARD OF CONTRACT.........................................................................................................58

31. Contract Award.............................................................................................................................. 58

32. Signing of the Contract................................................................................................................59

33. Performance Security..................................................................................................................60

34. Notice to Proceed..........................................................................................................................61

35. Protest Mechanism ………………………..……………….……………………………………….…61

32

A. General

1. Scope of Bid

1.1. The Procuring Entity named in the BDS invites bids for the supply and delivery of the Goods as described in Section VII. Technical Specifications.

1.2. The name, identification, and number of lots specific to this bidding are provided in the BDS. The contracting strategy and basis of evaluation of lots is described in ITB Clause 28.

2. Source of Funds

The Procuring Entity has a budget or has received funds from the Funding Source named in the BDS, and in the amount indicated in the BDS. It intends to apply part of the funds received for the Project, as defined in the BDS, to cover eligible payments under the contract.

3. Corrupt, Fraudulent, Collusive, and Coercive Practices

3.1. Unless otherwise specified in the BDS, the Procuring Entity as well as the bidders and suppliers shall observe the highest standard of ethics during the procurement and execution of the contract. In pursuance of this policy, the Procuring Entity:

(a) defines, for purposes of this provision, the terms set forth below as follows:

(i) “corrupt practice” means behavior on the part of officials in the public or private sectors by which they improperly and unlawfully enrich themselves, others, or induce others to do so, by misusing the position in which they are placed, and includes the offering, giving, receiving, or soliciting of anything of value to influence the action of any such official in the procurement process or in contract execution; entering, on behalf of the government, into any contract or transaction manifestly and grossly disadvantageous to the same, whether or not the public officer profited or will profit thereby, and similar acts as provided in RA 3019.

(ii) “fraudulent practice” means a misrepresentation of facts in order to influence a procurement process or the execution of a contract to the detriment of the Procuring Entity, and includes collusive practices among Bidders (prior to or after bid submission) designed to establish bid prices at artificial, non-competitive levels and to deprive the Procuring Entity of the benefits of free and open competition.

(iii) “collusive practices” means a scheme or arrangement between two or more Bidders, with or without the knowledge of the

33

Procuring Entity, designed to establish bid prices at artificial, non-competitive levels.

(iv) “coercive practices” means harming or threatening to harm, directly or indirectly, persons, or their property to influence their participation in a procurement process, or affect the execution of a contract;

(v) “obstructive practice” is

(aa) deliberately destroying, falsifying, altering or concealing of evidence material to an administrative proceedings or investigation or making false statements to investigators in order to materially impede an administrative proceedings or investigation of the Procuring Entity or any foreign government/foreign or international financing institution into allegations of a corrupt, fraudulent, coercive or collusive practice; and/or threatening, harassing or intimidating any party to prevent it from disclosing its knowledge of matters relevant to the administrative proceedings or investigation or from pursuing such proceedings or investigation; or

(bb) acts intended to materially impede the exercise of the inspection and audit rights of the Procuring Entity or any foreign government/foreign or international financing institution herein.

(b) will reject a proposal for award if it determines that the Bidder recommended for award has engaged in any of the practices mentioned in this Clause for purposes of competing for the contract.

3.2. Further, the Procuring Entity will seek to impose the maximum civil, administrative, and/or criminal penalties available under applicable laws on individuals and organizations deemed to be involved in any of the practices mentioned in ITB Clause (a).

3.3. Furthermore, the Funding Source and the Procuring Entity reserve the right to inspect and audit records and accounts of a bidder or supplier in the bidding for and performance of a contract themselves or through independent auditors as reflected in the GCC Clause 3.

4. Conflict of Interest

34

4.1. All Bidders found to have conflicting interests shall be disqualified to participate in the procurement at hand, without prejudice to the imposition of appropriate administrative, civil, and criminal sanctions. A Bidder may be considered to have conflicting interests with another Bidder in any of the events described in paragraphs (a) through (c) below and a general conflict of interest in any of the circumstances set out in paragraphs (d) through (g) below:

(a) A Bidder has controlling shareholders in common with another Bidder;

(b) A Bidder receives or has received any direct or indirect subsidy from any other Bidder;

(c) A Bidder has the same legal representative as that of another Bidder for purposes of this bid;

(d) A Bidder has a relationship, directly or through third parties, that puts them in a position to have access to information about or influence on the bid of another Bidder or influence the decisions of the Procuring Entity regarding this bidding process;

(e) A Bidder submits more than one bid in this bidding process. However, this does not limit the participation of subcontractors in more than one bid;

(f) A Bidder who participated as a consultant in the preparation of the design or technical specifications of the Goods and related services that are the subject of the bid; or

(g) A Bidder who lends, or temporarily seconds, its personnel to firms or organizations which are engaged in consulting services for the preparation related to procurement for or implementation of the project, if the personnel would be involved in any capacity on the same project.

4.2. In accordance with Section 47 of the IRR of RA 9184, all Bidding Documents shall be accompanied by a sworn affidavit of the Bidder that it is not related to the Head of the Procuring Entity (HoPE), members of the Bids and Awards Committee (BAC), members of the Technical Working Group (TWG), members of the BAC Secretariat, the head of the Project Management Office (PMO) or the end-user unit, and the project consultants, by consanguinity or affinity up to the third civil degree. On the part of the Bidder, this Clause shall apply to the following persons:

(a) If the Bidder is an individual or a sole proprietorship, to the Bidder himself;

(b) If the Bidder is a partnership, to all its officers and members;

(c) If the Bidder is a corporation, to all its officers, directors, and controlling stockholders;

35

(d) If the Bidder is a cooperative, to all its officers, directors, and controlling shareholders or members; and

(e) If the Bidder is a joint venture (JV), the provisions of items (a), (b), (c), or (d) of this Clause shall correspondingly apply to each of the members of the said JV, as may be appropriate.

Relationship of the nature described above or failure to comply with this Clause will result in the automatic disqualification of a Bidder.

5. Eligible Bidders

5.1. Unless otherwise provided in the BDS, the following persons shall be eligible to participate in this bidding:

(a) Duly licensed Filipino citizens/sole proprietorships;

(b) Partnerships duly organized under the laws of the Philippines and of which at least sixty percent (60%) of the interest belongs to citizens of the Philippines;

(c) Corporations duly organized under the laws of the Philippines, and of which at least sixty percent (60%) of the outstanding capital stock belongs to citizens of the Philippines;

(d) Cooperatives duly organized under the laws of the Philippines; and

(e) Persons/entities forming themselves into a Joint Venture (JV), i.e., a group of two (2) or more persons/entities that intend to be jointly and severally responsible or liable for a particular contract: Provided, however, that Filipino ownership or interest of the JV concerned shall be at least sixty percent (60%).

5.2. Foreign bidders may be eligible to participate when any of the following circumstances exist, as specified in the BDS:

(a) When a Treaty or International or Executive Agreement as provided in Section 4 of RA 9184 and its IRR allow foreign bidders to participate;

(b) Citizens, corporations, or associations of a country, the laws or regulations of which grant reciprocal rights or privileges to citizens, corporations, or associations of the Philippines;

(c) When the Goods sought to be procured are not available from local suppliers; or

(d) When there is a need to prevent situations that defeat competition or restrain trade.

36

5.3. Government owned or –controlled corporations (GOCCs) may be eligible to participate only if they can establish that they (a) are legally and financially autonomous, (b) operate under commercial law, and (c) are not attached agencies of the Procuring Entity.

5.4. Unless otherwise provided in the BDS, the Bidder must have completed a Single Largest Completed Contract (SLCC) similar to the Project and the value of which, adjusted, if necessary, by the Bidder to current prices using the Philippine Statistics Authority (PSA) consumer price index, must be at least equivalent to a percentage of the ABC stated in the BDS.

For this purpose, contracts similar to the Project shall be those described in the BDS, and completed within the relevant period stated in the Invitation to Bid and ITB Clause 12.1(a)(ii).

5.5. The Bidder must submit a computation of its Net Financial Contracting Capacity (NFCC), which must be at least equal to the ABC to be bid, calculated as follows:

NFCC = [(Current assets minus current liabilities) (15)] minus the value of all outstanding or uncompleted portions of the projects under ongoing contracts, including awarded contracts yet to be started, coinciding with the contract to be bid.

The values of the domestic bidder’s current assets and current liabilities shall be based on the latest Audited Financial Statements submitted to the BIR.

For purposes of computing the foreign bidders’ NFCC, the value of the current assets and current liabilities shall be based on their audited financial statements prepared in accordance with international financial reporting standards.

If the prospective bidder opts to submit a committed Line of Credit, it must be at least equal to ten percent (10%) of the ABC to be bid. If issued by a foreign universal or commercial bank, it shall be confirmed or authenticated by a local universal or commercial bank.

6. Bidder’s Responsibilities

6.1. The Bidder or its duly authorized representative shall submit a sworn statement in the form prescribed in Section VIII. Bidding Forms as required in ITB Clause 12.1(b)(iii).

6.2. The Bidder is responsible for the following:

(a) Having taken steps to carefully examine all of the Bidding Documents;

37

(b) Having acknowledged all conditions, local or otherwise, affecting the implementation of the contract;

(c) Having made an estimate of the facilities available and needed for the contract to be bid, if any;

(d) Having complied with its responsibility to inquire or secure Supplemental/Bid Bulletin(s) as provided under ITB Clause 10.4.

(e) Ensuring that it is not “blacklisted” or barred from bidding by the GOP or any of its agencies, offices, corporations, or LGUs, including foreign government/foreign or international financing institution whose blacklisting rules have been recognized by the GPPB;

(f) Ensuring that each of the documents submitted in satisfaction of the bidding requirements is an authentic copy of the original, complete, and all statements and information provided therein are true and correct;

(g) Authorizing the HoPE or its duly authorized representative/s to verify all the documents submitted;

(h) Ensuring that the signatory is the duly authorized representative of the Bidder, and granted full power and authority to do, execute and perform any and all acts necessary and/or to represent the Bidder in the bidding, with the duly notarized Secretary’s Certificate attesting to such fact, if the Bidder is a corporation, partnership, cooperative, or joint venture;

(i) Complying with the disclosure provision under Section 47 of RA 9184 and its IRR in relation to other provisions of RA 3019;

(j) Complying with existing labor laws and standards, in the case of procurement of services; Moreover, bidder undertakes to:

(i) Ensure the entitlement of workers to wages, hours of work, safety and health and other prevailing conditions of work as established by national laws, rules and regulations; or collective bargaining agreement; or arbitration award, if and when applicable.

In case there is a finding by the Procuring Entity or the DOLE of underpayment or non-payment of workers’ wage and wage-related benefits, bidder agrees that the performance security or portion of the contract amount shall be withheld in favor of the complaining workers pursuant to appropriate provisions of Republic Act No. 9184 without prejudice to the institution of appropriate actions under the Labor Code, as amended, and other social legislations.

38

(ii) Comply with occupational safety and health standards and to correct deficiencies, if any.

In case of imminent danger, injury or death of the worker, bidder undertakes to suspend contract implementation pending clearance to proceed from the DOLE Regional Office and to comply with Work Stoppage Order; and

(iii) Inform the workers of their conditions of work, labor clauses under the contract specifying wages, hours of work and other benefits under prevailing national laws, rules and regulations; or collective bargaining agreement; or arbitration award, if and when applicable, through posting in two (2) conspicuous places in the establishment’s premises; and

(k) Ensuring that it did not give or pay, directly or indirectly, any commission, amount, fee, or any form of consideration, pecuniary or otherwise, to any person or official, personnel or representative of the government in relation to any procurement project or activity.

Failure to observe any of the above responsibilities shall be at the risk of the Bidder concerned.

6.3. The Bidder is expected to examine all instructions, forms, terms, and specifications in the Bidding Documents.

6.4. It shall be the sole responsibility of the Bidder to determine and to satisfy itself by such means as it considers necessary or desirable as to all matters pertaining to the contract to be bid, including: (a) the location and the nature of this Project; (b) climatic conditions; (c) transportation facilities; and (d) other factors that may affect the cost, duration, and execution or implementation of this Project.

6.5. The Procuring Entity shall not assume any responsibility regarding erroneous interpretations or conclusions by the prospective or eligible bidder out of the data furnished by the procuring entity. However, the Procuring Entity shall ensure that all information in the Bidding Documents, including bid/supplemental bid bulletin/s issued, are correct and consistent.

6.6. Before submitting their bids, the Bidder is deemed to have become familiar with all existing laws, decrees, ordinances, acts and regulations of the Philippines which may affect this Project in any way.

6.7. The Bidder shall bear all costs associated with the preparation and submission of his bid, and the Procuring Entity will in no case be

39

responsible or liable for those costs, regardless of the conduct or outcome of the bidding process.

6.8. The Bidder should note that the Procuring Entity will accept bids only from those that have paid the applicable fee for the Bidding Documents at the office indicated in the Invitation to Bid.

7. Origin of Goods

Unless otherwise indicated in the BDS, there is no restriction on the origin of goods other than those prohibited by a decision of the United Nations Security Council taken under Chapter VII of the Charter of the United Nations, subject to ITB Clause 27.1.

8. Subcontracts

8.1. Unless otherwise specified in the BDS, the Bidder may subcontract portions of the Goods to an extent as may be approved by the Procuring Entity and stated in the BDS. However, subcontracting of any portion shall not relieve the Bidder from any liability or obligation that may arise from the contract for this Project.

8.2. Subcontractors must submit the documentary requirements under ITB Clause 12 and comply with the eligibility criteria specified in the BDS. In the event that any subcontractor is found by the Procuring Entity to be ineligible, the subcontracting of such portion of the Goods shall be disallowed.

8.3. The Bidder may identify the subcontractor to whom a portion of the Goods will be subcontracted at any stage of the bidding process or during contract implementation. If the Bidder opts to disclose the name of the subcontractor during bid submission, the Bidder shall include the required documents as part of the technical component of its bid.

B. Contents of Bidding Documents

9. Pre-Bid Conference

9.1. (a) If so specified in the BDS, a pre-bid conference shall be held at the venue and on the date indicated therein, to clarify and address the Bidders’ questions on the technical and financial components of this Project.

(b) The pre-bid conference shall be held at least twelve (12) calendar days before the deadline for the submission and receipt of bids, but not earlier than seven (7) calendar days from the posting of the invitation to bid/bidding documents in the PhilGEPS website. If the Procuring Entity determines that, by reason of the method, nature, or complexity of the contract to be bid, or when international participation will be more advantageous to the GOP, a longer period for the preparation of bids is

40

necessary, the pre-bid conference shall be held at least thirty (30) calendar days before the deadline for the submission and receipt of bids, as specified in the BDS.

9.2. Bidders are encouraged to attend the pre-bid conference to ensure that they fully understand the Procuring Entity’s requirements. Non-attendance of the Bidder will in no way prejudice its bid; however, the Bidder is expected to know the changes and/or amendments to the Bidding Documents as recorded in the minutes of the pre-bid conference and the Supplemental/Bid Bulletin. The minutes of the pre-bid conference shall be recorded and prepared not later than five (5) calendar days after the pre-bid conference. The minutes shall be made available to prospective bidders not later than five (5) days upon written request.

9.3 Decisions of the BAC amending any provision of the bidding documents shall be issued in writing through a Supplemental/Bid Bulletin at least seven (7) calendar days before the deadline for the submission and receipt of bids.

10. Clarification and Amendment of Bidding Documents

10.1. Prospective bidders may request for clarification on and/or interpretation of any part of the Bidding Documents. Such request must be in writing and submitted to the Procuring Entity at the address indicated in the BDS at least ten (10) calendar days before the deadline set for the submission and receipt of Bids.

10.2. The BAC shall respond to the said request by issuing a Supplemental/Bid Bulletin, to be made available to all those who have properly secured the Bidding Documents, at least seven (7) calendar days before the deadline for the submission and receipt of Bids.

10.3. Supplemental/Bid Bulletins may also be issued upon the Procuring Entity’s initiative for purposes of clarifying or modifying any provision of the Bidding Documents not later than seven (7) calendar days before the deadline for the submission and receipt of Bids. Any modification to the Bidding Documents shall be identified as an amendment.

10.4. Any Supplemental/Bid Bulletin issued by the BAC shall also be posted in the PhilGEPS and the website of the Procuring Entity concerned, if available, and at any conspicuous place in the premises of the Procuring Entity concerned. It shall be the responsibility of all Bidders who have properly secured the Bidding Documents to inquire and secure Supplemental/Bid Bulletins that may be issued by the BAC. However, Bidders who have submitted bids before the issuance of the Supplemental/Bid Bulletin must be informed and allowed to modify or withdraw their bids in accordance with ITB Clause 23.

41

C. Preparation of Bids

11. Language of Bids

The eligibility requirements or statements, the bids, and all other documents to be submitted to the BAC must be in English. If the eligibility requirements or statements, the bids, and all other documents submitted to the BAC are in foreign language other than English, it must be accompanied by a translation of the documents in English. The documents shall be translated by the relevant foreign government agency, the foreign government agency authorized to translate documents, or a registered translator in the foreign bidder’s country; and shall be authenticated by the appropriate Philippine foreign service establishment/post or the equivalent office having jurisdiction over the foreign bidder’s affairs in the Philippines. The English translation shall govern, for purposes of interpretation of the bid.

12. Documents Comprising the Bid: Eligibility and Technical Components

12.1. Unless otherwise indicated in the BDS, the first envelope shall contain the following eligibility and technical documents:

(a) Eligibility Documents –

Class “A” Documents:

(i) PhilGEPS Certificate of Registration and Membership in accordance with Section 8.5.2 of the IRR, except for foreign bidders participating in the procurement by a Philippine Foreign Service Office or Post, which shall submit their eligibility documents under Section 23.1 of the IRR, provided, that the winning bidder shall register with the PhilGEPS in accordance with section 37.1.4 of the IRR.

(ii) Statement of all its ongoing government and private contracts, including contracts awarded but not yet started, if any, whether similar or not similar in nature and complexity to the contract to be bid; and

Statement of the Bidder’s SLCC similar to the contract to be bid, in accordance with ITB Clause 5.4, within the relevant period as provided in the BDS.

The two statements required shall indicate for each contract the following:

(ii.1) name of the contract;

(ii.2) date of the contract;

(ii.3) contract duration;

42

(ii.4) owner’s name and address;

(ii.5) kinds of Goods;

(ii.6) For Statement of Ongoing Contracts - amount of contract and value of outstanding contracts;

(ii.7) For Statement of SLCC - amount of completed contracts, adjusted by the Bidder to current prices using PSA’s consumer price index, if necessary for the purpose of meeting the SLCC requirement;

(ii.8) date of delivery; and

(ii.9) end user’s acceptance or official receipt(s) or sales invoice issued for the contract, if completed, which shall be attached to the statements.

(iii) NFCC computation in accordance with ITB Clause 5.5 or a committed Line of Credit from a universal or commercial bank.

Class “B” Document:

(iv) If applicable, the Joint Venture Agreement (JVA) in case the joint venture is already in existence, or duly notarized statements from all the potential joint venture partners in accordance with Section 23.1(b) of the IRR.

(b) Technical Documents –

(i) Bid security in accordance with ITB Clause 18. If the Bidder opts to submit the bid security in the form of:

(i.1) a bank draft/guarantee or an irrevocable letter of credit issued by a foreign bank, it shall be accompanied by a confirmation from a Universal or Commercial Bank; or

(i.2) a surety bond, it shall be accompanied by a certification by the Insurance Commission that the surety or insurance company is authorized to issue such instruments;

(ii) Conformity with technical specifications, as enumerated and specified in Sections VI and VII of the Bidding Documents; and

(iii) Sworn statement in accordance with Section 25.3 of the IRR of RA 9184 and using the form prescribed in Section VIII. Bidding Forms.

(iv) For foreign bidders claiming eligibility by reason of their country’s extension of reciprocal rights to Filipinos, a certification from the relevant government office of their country stating that Filipinos are

43

allowed to participate in their government procurement activities for the same item or product.

13. Documents Comprising the Bid: Financial Component

13.1. Unless otherwise stated in the BDS, the financial component of the bid shall contain the following:

(a) Financial Bid Form, which includes bid prices and the applicable Price Schedules, in accordance with ITB Clauses 15.1 and 15.4;

(b) If the Bidder claims preference as a Domestic Bidder, a certification from the DTI issued in accordance with ITB Clause 27, unless otherwise provided in the BDS; and

(c) Any other document related to the financial component of the bid as stated in the BDS.

13.2. (a) Unless otherwise stated in the BDS, all bids that exceed the ABC shall not be accepted.

(b) Unless otherwise indicated in the BDS, for foreign-funded procurement, a ceiling may be applied to bid prices provided the following conditions are met:

(i) Bidding Documents are obtainable free of charge on a freely accessible website. If payment of Bidding Documents is required by the procuring entity, payment could be made upon the submission of bids.

(ii) The procuring entity has procedures in place to ensure that the ABC is based on recent estimates made by the responsible unit of the procuring entity and that the estimates reflect the quality, supervision and risk and inflationary factors, as well as prevailing market prices, associated with the types of works or goods to be procured.

(iii) The procuring entity has trained cost estimators on estimating prices and analyzing bid variances.

(iv) The procuring entity has established a system to monitor and report bid prices relative to ABC and engineer’s/procuring entity’s estimate.

(v) The procuring entity has established a monitoring and evaluation system for contract implementation to provide a feedback on actual total costs of goods and works.

14. Alternative Bids

44

14.1 Alternative Bids shall be rejected. For this purpose, alternative bid is an offer made by a Bidder in addition or as a substitute to its original bid which may be included as part of its original bid or submitted separately therewith for purposes of bidding. A bid with options is considered an alternative bid regardless of whether said bid proposal is contained in a single envelope or submitted in two (2) or more separate bid envelopes.

14.2 Each Bidder shall submit only one Bid, either individually or as a partner in a JV. A Bidder who submits or participates in more than one bid (other than as a subcontractor if a subcontractor is permitted to participate in more than one bid) will cause all the proposals with the Bidder’s participation to be disqualified. This shall be without prejudice to any applicable criminal, civil and administrative penalties that may be imposed upon the persons and entities concerned.

15. Bid Prices

15.1. The Bidder shall complete the appropriate Schedule of Prices included herein, stating the unit prices, total price per item, the total amount and the expected countries of origin of the Goods to be supplied under this Project.

15.2. The Bidder shall fill in rates and prices for all items of the Goods described in the Schedule of Prices. Bids not addressing or providing all of the required items in the Bidding Documents including, where applicable, Schedule of Prices, shall be considered non-responsive and, thus, automatically disqualified. In this regard, where a required item is provided, but no price is indicated, the same shall be considered as non-responsive, but specifying a zero (0) or a dash (-) for the said item would mean that it is being offered for free to the Government, except those required by law or regulations to be accomplished.

15.3. The terms Ex Works (EXW), Cost, Insurance and Freight (CIF), Cost and Insurance Paid to (CIP), Delivered Duty Paid (DDP), and other trade terms used to describe the obligations of the parties, shall be governed by the rules prescribed in the current edition of the International Commercial Terms (INCOTERMS) published by the International Chamber of Commerce, Paris.

15.4. Prices indicated on the Price Schedule shall be entered separately in the following manner:

(a) For Goods offered from within the Procuring Entity’s country:

(i) The price of the Goods quoted EXW (ex works, ex factory, ex warehouse, ex showroom, or off-the-shelf, as applicable);

(ii) The cost of all customs duties and sales and other taxes already paid or payable;

45

(iii) The cost of transportation, insurance, and other costs incidental to delivery of the Goods to their final destination; and

(iv) The price of other (incidental) services, if any, listed in the BDS.

(b) For Goods offered from abroad:

(i) Unless otherwise stated in the BDS, the price of the Goods shall be quoted DDP with the place of destination in the

Philippines as specified in the BDS. In quoting the price, the Bidder shall be free to use transportation through carriers registered in any eligible country. Similarly, the Bidder may obtain insurance services from any eligible source country.

(ii) The price of other (incidental) services, if any, listed in the BDS.

(c) For Services, based on the form which may be prescribed by the Procuring Entity, in accordance with existing laws, rules and regulations.

15.5. Prices quoted by the Bidder shall be fixed during the Bidder’s performance of the contract and not subject to variation or price escalation on any account. A bid submitted with an adjustable price quotation shall be treated as non-responsive and shall be rejected, pursuant to ITB Clause 24.

All bid prices for the given scope of work in the contract as awarded shall be considered as fixed prices, and therefore not subject to price escalation during contract implementation, except under extraordinary circumstances. Upon the recommendation of the Procuring Entity, price escalation may be allowed in extraordinary circumstances as may be determined by the National Economic and Development Authority in accordance with the Civil Code of the Philippines, and upon approval by the GPPB. Nevertheless, in cases where the cost of the awarded contract is affected by any applicable new laws, ordinances, regulations, or other acts of the GOP, promulgated after the date of bid opening, a contract price adjustment shall be made or appropriate relief shall be applied on a no loss-no gain basis.

16. Bid Currencies

16.1. Prices shall be quoted in the following currencies:

46

(a) For Goods that the Bidder will supply from within the Philippines, the prices shall be quoted in Philippine Pesos.

(b) For Goods that the Bidder will supply from outside the Philippines, the prices may be quoted in the currency(ies) stated in the BDS. However, for purposes of bid evaluation, bids denominated in foreign currencies shall be converted to Philippine currency based on the exchange rate as published in the Bangko Sentral ng Pilipinas (BSP) reference rate bulletin on the day of the bid opening.

16.2. If so allowed in accordance with ITB Clause 16.1, the Procuring Entity for purposes of bid evaluation and comparing the bid prices will convert the amounts in various currencies in which the bid price is expressed to Philippine Pesos at the foregoing exchange rates.

16.3. Unless otherwise specified in the BDS, payment of the contract price shall be made in Philippine Pesos.

17. Bid Validity

17.1. Bids shall remain valid for the period specified in the BDS which shall not exceed one hundred twenty (120) calendar days from the date of the opening of bids.

17.2. In exceptional circumstances, prior to the expiration of the bid validity period, the Procuring Entity may request Bidders to extend the period of validity of their bids. The request and the responses shall be made in writing. The bid security described in ITB Clause 18 should also be extended corresponding to the extension of the bid validity period at the least. A Bidder may refuse the request without forfeiting its bid security, but his bid shall no longer be considered for further evaluation and award. A Bidder granting the request shall not be required or permitted to modify its bid.

18. Bid Security

18.1. The Bidder shall submit a Bid Securing Declaration or any form of Bid Security in the amount stated in the BDS, which shall be not less than the percentage of the ABC in accordance with the following schedule:

Form of Bid SecurityAmount of Bid Security

(Not Less than the Percentage of the ABC)

47

(a) Cash or cashier’s/manager’s check issued by a Universal or Commercial Bank.

For biddings conducted by LGUs, the Cashier’s/Manager’s Check may be issued by other banks certified by the BSP as authorized to issue such financial instrument.

Two percent (2%)

(b) Bank draft/guarantee or irrevocable letter of credit issued by a Universal or Commercial Bank: Provided, however, that it shall be confirmed or authenticated by a Universal or Commercial Bank, if issued by a foreign bank.

For biddings conducted by LGUs, Bank Draft/Guarantee, or Irrevocable Letter of Credit may be issued by other banks certified by the BSP as authorized to issue such financial instrument.

(c) Surety bond callable upon demand issued by a surety or insurance company duly certified by the Insurance Commission as authorized to issue such security.

Five percent (5%)

The Bid Securing Declaration mentioned above is an undertaking which states, among others, that the Bidder shall enter into contract with the procuring entity and furnish the performance security required under ITB Clause 33.2, within ten (10) calendar days from receipt of the Notice of Award, and commits to pay the corresponding amount as fine, and be suspended for a period of time from being qualified to participate in any government procurement activity in the event it violates any of the conditions stated therein as provided in the guidelines issued by the GPPB.

18.2. The bid security should be valid for the period specified in the BDS. Any bid not accompanied by an acceptable bid security shall be rejected by the Procuring Entity as non-responsive.

18.3. No bid securities shall be returned to Bidders after the opening of bids and before contract signing, except to those that failed or declared as post-disqualified, upon submission of a written waiver of their right to file a request for reconsideration and/or protest, or upon the lapse of the

48

reglementary period to file a request for reconsideration or protest. Without prejudice on its forfeiture, bid securities shall be returned only after the Bidder with the Lowest Calculated Responsive Bid (LCRB) has signed the contract and furnished the performance security, but in no case later than the expiration of the bid security validity period indicated in ITB Clause 18.2.

18.4. Upon signing and execution of the contract pursuant to ITB Clause 32, and the posting of the performance security pursuant to ITB Clause 33, the successful Bidder’s bid security will be discharged, but in no case later than the bid security validity period as indicated in the ITB Clause 18.2.

18.5. The bid security may be forfeited:

(a) if a Bidder:

(i) withdraws its bid during the period of bid validity specified in ITB Clause 17;

(ii) does not accept the correction of errors pursuant to ITB Clause (b);

(iii) has a finding against the veracity of any of the documents submitted as stated in ITB Clause 29.2;

(iv) submission of eligibility requirements containing false information or falsified documents;

(v) submission of bids that contain false information or falsified documents, or the concealment of such information in the bids in order to influence the outcome of eligibility screening or any other stage of the public bidding;

(vi) allowing the use of one’s name, or using the name of another for purposes of public bidding;

(vii) withdrawal of a bid, or refusal to accept an award, or enter into contract with the Government without justifiable cause, after the Bidder had been adjudged as having submitted the LCRB;

(viii) refusal or failure to post the required performance security within the prescribed time;

(ix) refusal to clarify or validate in writing its bid during post-qualification within a period of seven (7) calendar days from receipt of the request for clarification;

(x) any documented attempt by a Bidder to unduly influence the outcome of the bidding in his favor;

49

(xi) failure of the potential joint venture partners to enter into the joint venture after the bid is declared successful; or

(xii) all other acts that tend to defeat the purpose of the competitive bidding, such as habitually withdrawing from bidding, submitting late Bids or patently insufficient bid, for at least three (3) times within a year, except for valid reasons.

(b) if the successful Bidder:

(i) fails to sign the contract in accordance with ITB Clause 32; or

(ii) fails to furnish performance security in accordance with ITB Clause 33.

19. Format and Signing of Bids

19.1. Bidders shall submit their bids through their duly authorized representative using the appropriate forms provided in

19.2. Section VIII. Bidding Forms on or before the deadline specified in the ITB Clauses 21 in two (2) separate sealed bid envelopes, and which shall be submitted simultaneously. The first shall contain the technical component of the bid, including the eligibility requirements under ITB Clause 12.1, and the second shall contain the financial component of the bid. This shall also be observed for each lot in the case of lot procurement.

19.3. Forms as mentioned in ITB Clause 19.1 must be completed without any alterations to their format, and no substitute form shall be accepted. All blank spaces shall be filled in with the information requested.

19.4. The Bidder shall prepare and submit an original of the first and second envelopes as described in ITB Clauses 12 and 13. In addition, the Bidder shall submit copies of the first and second envelopes. In the event of any discrepancy between the original and the copies, the original shall prevail.

19.5. Each and every page of the Bid Form, including the Schedule of Prices, under Section VIII hereof, shall be signed by the duly authorized representative/s of the Bidder. Failure to do so shall be a ground for the rejection of the bid.

19.6. Any interlineations, erasures, or overwriting shall be valid only if they are signed or initialed by the duly authorized representative/s of the Bidder.

20. Sealing and Marking of Bids

50

20.1. Bidders shall enclose their original eligibility and technical documents described in ITB Clause 12 in one sealed envelope marked “ORIGINAL - TECHNICAL COMPONENT”, and the original of their financial component in another sealed envelope marked “ORIGINAL - FINANCIAL COMPONENT”, sealing them all in an outer envelope marked “ORIGINAL BID”.

20.2. Each copy of the first and second envelopes shall be similarly sealed duly marking the inner envelopes as “COPY NO. ___ - TECHNICAL COMPONENT” and “COPY NO. ___ – FINANCIAL COMPONENT” and the outer envelope as “COPY NO. ___”, respectively. These envelopes containing the original and the copies shall then be enclosed in one single envelope.

20.3. The original and the number of copies of the Bid as indicated in the BDS shall be typed or written in ink and shall be signed by the Bidder or its duly authorized representative/s.

20.4. All envelopes shall:

(a) contain the name of the contract to be bid in capital letters;

(b) bear the name and address of the Bidder in capital letters;

(c) be addressed to the Procuring Entity’s BAC in accordance with ITB Clause 1.1;

(d) bear the specific identification of this bidding process indicated in the ITB Clause 1.2; and

(e) bear a warning “DO NOT OPEN BEFORE…” the date and time for the opening of bids, in accordance with ITB Clause 21.

20.5. Bid envelopes that are not properly sealed and marked, as required in the bidding documents, shall not be rejected, but the Bidder or its duly authorized representative shall acknowledge such condition of the bid as submitted. The BAC or the Procuring Entity shall assume no responsibility for the misplacement of the contents of the improperly sealed or marked bid, or for its premature opening.

D. Submission and Opening of Bids

21. Deadline for Submission of Bids

Bids must be received by the Procuring Entity’s BAC at the address and on or before the date and time indicated in the BDS.

22. Late Bids

51

Any bid submitted after the deadline for submission and receipt of bids prescribed by the Procuring Entity, pursuant to ITB Clause 21, shall be declared “Late” and shall not be accepted by the Procuring Entity. The BAC shall record in the minutes of bid submission and opening, the Bidder’s name, its representative and the time the late bid was submitted.

23. Modification and Withdrawal of Bids

23.1. The Bidder may modify its bid after it has been submitted; provided that the modification is received by the Procuring Entity prior to the deadline prescribed for submission and receipt of bids. The Bidder shall not be allowed to retrieve its original bid, but shall be allowed to submit another bid equally sealed and properly identified in accordance with ITB Clause 20, linked to its original bid marked as “TECHNICAL MODIFICATION” or “FINANCIAL MODIFICATION” and stamped “received” by the BAC. Bid modifications received after the applicable deadline shall not be considered and shall be returned to the Bidder unopened.

23.2 A Bidder may, through a Letter of Withdrawal, withdraw its bid after it has been submitted, for valid and justifiable reason; provided that the Letter of Withdrawal is received by the Procuring Entity prior to the deadline prescribed for submission and receipt of bids. The Letter of Withdrawal must be executed by the duly authorized representative of the Bidder identified in the Omnibus Sworn Statement, a copy of which should be attached to the letter.

23.3. Bids requested to be withdrawn in accordance with ITB Clause 23.1 shall be returned unopened to the Bidders. A Bidder, who has acquired the bidding documents, may also express its intention not to participate in the bidding through a letter which should reach and be stamped by the BAC before the deadline for submission and receipt of bids. A Bidder that withdraws its bid shall not be permitted to submit another bid, directly or indirectly, for the same contract.

23.4. No bid may be modified after the deadline for submission of bids. No bid may be withdrawn in the interval between the deadline for submission of bids and the expiration of the period of bid validity specified by the Bidder on the Financial Bid Form. Withdrawal of a bid during this interval shall result in the forfeiture of the Bidder’s bid security, pursuant to ITB Clause 18.5, and the imposition of administrative, civil and criminal sanctions as prescribed by RA 9184 and its IRR.

24. Opening and Preliminary Examination of Bids

52

24.1. The BAC shall open the bids in public, immediately after the deadline for the submission and receipt of bids, as specified in the BDS. In case the Bids cannot be opened as scheduled due to justifiable reasons, the BAC shall take custody of the Bids submitted and reschedule the opening of Bids on the next working day or at the soonest possible time through the issuance of a Notice of Postponement to be posted in the PhilGEPS website and the website of the Procuring Entity concerned.

24.2. Unless otherwise specified in the BDS, the BAC shall open the first bid envelopes and determine each Bidder’s compliance with the documents prescribed in ITB Clause 12, using a non-discretionary “pass/fail” criterion. If a Bidder submits the required document, it shall be rated “passed” for that particular requirement. In this regard, bids that fail to include any requirement or are incomplete or patently insufficient shall be considered as “failed”. Otherwise, the BAC shall rate the said first bid envelope as “passed”.

24.3. Unless otherwise specified in the BDS, immediately after determining compliance with the requirements in the first envelope, the BAC shall forthwith open the second bid envelope of each remaining eligible bidder whose first bid envelope was rated “passed”. The second envelope of each complying bidder shall be opened within the same day. In case one or more of the requirements in the second envelope of a particular bid is missing, incomplete or patently insufficient, and/or if the submitted total bid price exceeds the ABC unless otherwise provided in ITB Clause 13.2, the BAC shall rate the bid concerned as “failed”. Only bids that are determined to contain all the bid requirements for both components shall be rated “passed” and shall immediately be considered for evaluation and comparison.

24.4. Letters of Withdrawal shall be read out and recorded during bid opening, and the envelope containing the corresponding withdrawn bid shall be returned to the Bidder unopened.

24.5. All members of the BAC who are present during bid opening shall initial every page of the original copies of all bids received and opened.

24.6. In the case of an eligible foreign bidder as described in ITB Clause 5, the following Class “A” Documents may be substituted with the appropriate equivalent documents, if any, issued by the country of the foreign Bidder concerned, which shall likewise be uploaded and maintained in the PhilGEPS in accordance with Section 8.5.2 of the IRR:

(a) Registration certificate from the Securities and Exchange Commission (SEC), Department of Trade and Industry (DTI) for sole proprietorship, or CDA for cooperatives;

53

(b) Mayor’s/Business permit issued by the local government where the principal place of business of the bidder is located; and

(c) Audited Financial Statements showing, among others, the prospective bidder’s total and current assets and liabilities stamped “received” by the Bureau of Internal Revenue or its duly accredited and authorized institutions, for the preceding calendar year which should not be earlier than two years from the date of bid submission.

24.7. Each partner of a joint venture agreement shall likewise submit the requirements in ITB Clause 12.1(a)(i). Submission of documents required under ITB Clauses 12.1(a)(ii) to 12.1(a)(iii) by any of the joint venture partners constitutes compliance.

24.8. The Procuring Entity shall prepare the minutes of the proceedings of the bid opening that shall include, as a minimum: (a) names of Bidders, their bid price (per lot, if applicable, and/or including discount, if any), bid security, findings of preliminary examination, and whether there is a withdrawal or modification; and (b) attendance sheet. The BAC members shall sign the abstract of bids as read.

24.8 The bidders or their duly authorized representatives may attend the opening of bids. The BAC shall ensure the integrity, security, and confidentiality of all submitted bids. The Abstract of Bids as read and the minutes of the bid opening shall be made available to the public upon written request and payment of a specified fee to recover cost of materials.

24.9 To ensure transparency and accurate representation of the bid submission, the BAC Secretariat shall notify in writing all bidders whose bids it has received through its PhilGEPS-registered physical address or official e-mail address. The notice shall be issued within seven (7) calendar days from the date of the bid opening.

E. Evaluation and Comparison of Bids

25. Process to be Confidential

25.1. Members of the BAC, including its staff and personnel, as well as its Secretariat and TWG, are prohibited from making or accepting any kind of communication with any bidder regarding the evaluation of their bids until the issuance of the Notice of Award, unless otherwise allowed in the case of ITB Clause 26.

25.2. Any effort by a bidder to influence the Procuring Entity in the Procuring Entity’s decision in respect of bid evaluation, bid comparison or contract award will result in the rejection of the Bidder’s bid.

54

26. Clarification of Bids

To assist in the evaluation, comparison, and post-qualification of the bids, the Procuring Entity may ask in writing any Bidder for a clarification of its bid. All responses to requests for clarification shall be in writing. Any clarification submitted by a Bidder in respect to its bid and that is not in response to a request by the Procuring Entity shall not be considered.

27. Domestic Preference

27.1. Unless otherwise stated in the BDS, the Procuring Entity will grant a margin of preference for the purpose of comparison of bids in accordance with the following:

(a) The preference shall be applied when the lowest Foreign Bid is lower than the lowest bid offered by a Domestic Bidder.

(b) For evaluation purposes, the lowest Foreign Bid shall be increased by fifteen percent (15%).

(c) In the event that the lowest bid offered by a Domestic Bidder does not exceed the lowest Foreign Bid as increased, then the Procuring Entity shall award the contract to the Domestic Bidder at the amount of the lowest Foreign Bid.

(d) If the Domestic Bidder refuses to accept the award of contract at the amount of the Foreign Bid within two (2) calendar days from receipt of written advice from the BAC, the Procuring Entity shall award to the bidder offering the Foreign Bid, subject to post-qualification and submission of all the documentary requirements under these Bidding Documents.

27.2. A Bidder may be granted preference as a Domestic Bidder subject to the certification from the DTI that the Bidder is offering unmanufactured articles, materials or supplies of the growth or production of the Philippines, or manufactured articles, materials, or supplies manufactured or to be manufactured in the Philippines substantially from articles, materials, or supplies of the growth, production, or manufacture, as the case may be, of the Philippines.

28. Detailed Evaluation and Comparison of Bids

28.1. The Procuring Entity will undertake the detailed evaluation and comparison of bids which have passed the opening and preliminary examination of bids, pursuant to ITB Clause 24, in order to determine the Lowest Calculated Bid.28.2. The Lowest Calculated Bid shall be determined in two steps:

(a) The detailed evaluation of the financial component of the bids, to establish the correct calculated prices of the bids; and

55

(b) The ranking of the total bid prices as so calculated from the lowest to the highest. The bid with the lowest price shall be identified as the Lowest Calculated Bid.28.3. The Procuring Entity’s BAC shall immediately conduct a detailed evaluation of all bids rated “passed,” using non-discretionary pass/fail criteria. The BAC shall consider the following in the evaluation of bids:

(a) Completeness of the bid. Unless the BDS allows partial bids, bids not addressing or providing all of the required items in the Schedule of Requirements including, where applicable, Schedule of Prices, shall be considered non-responsive and, thus, automatically disqualified. In this regard, where a required item is provided, but no price is indicated, the same shall be considered as non-responsive, but specifying a zero (0) or a dash (-) for the said item would mean that it is being offered for free to the Procuring Entity, except those required by law or regulations to be provided for; and

(b) Arithmetical corrections. Consider computational errors and omissions to enable proper comparison of all eligible bids. It may also consider bid modifications. Any adjustment shall be calculated in monetary terms to determine the calculated prices.

28.4. Based on the detailed evaluation of bids, those that comply with the above-mentioned requirements shall be ranked in the ascending order of their total calculated bid prices, as evaluated and corrected for computational errors, discounts and other modifications, to identify the Lowest Calculated Bid. Total calculated bid prices, as evaluated and corrected for computational errors, discounts and other modifications, which exceed the ABC shall not be considered, unless otherwise indicated in the BDS.

28.5. The Procuring Entity’s evaluation of bids shall be based on the bid price quoted in the Bid Form, which includes the Schedule of Prices.

28.6. Bids shall be evaluated on an equal footing to ensure fair competition. For this purpose, all bidders shall be required to include in their bids the cost of all taxes, such as, but not limited to, value added tax (VAT), income tax, local taxes, and other fiscal levies and duties which shall be itemized in the bid form and reflected in the detailed estimates. Such bids, including said taxes, shall be the basis for bid evaluation and comparison.

28.7. If so indicated pursuant to ITB Clause 1.2, Bids are being invited for individual lots or for any combination thereof, provided that all Bids and combinations of Bids shall be received by the same deadline and opened and evaluated simultaneously so as to determine the Bid or combination of Bids offering the lowest calculated cost to the Procuring Entity. Bid prices quoted shall correspond to all items specified for each lot and to all

56

quantities specified for each item of a lot. Bid Security as required by ITB Clause 18 shall be submitted for each contract (lot) separately. The basis for evaluation of lots is specified in BDS Clause 28.3.

29. Post-Qualification

29.1. The BAC shall determine to its satisfaction whether the Bidder that is evaluated as having submitted the Lowest Calculated Bid complies with and is responsive to all the requirements and conditions specified in ITB Clauses 5, 12, and 13.

29.2. Within a non-extendible period of five (5) calendar days from receipt by the bidder of the notice from the BAC that it submitted the Lowest Calculated Bid, the Bidder shall submit its latest income and business tax returns filed and paid through the BIR Electronic Filing and Payment System (eFPS) and other appropriate licenses and permits required by law and stated in the BDS.

Failure to submit any of the post-qualification requirements on time, or a finding against the veracity thereof, shall disqualify the bidder for award. Provided in the event that a finding against the veracity of any of the documents submitted is made, it shall cause the forfeiture of the bid security in accordance with Section 69 of the IRR of RA 9184.

29.3. The determination shall be based upon an examination of the documentary evidence of the Bidder’s qualifications submitted pursuant to ITB Clauses 12 and 13, as well as other information as the Procuring Entity deems necessary and appropriate, using a non-discretionary “pass/fail” criterion, which shall be completed within a period of twelve (12) calendar days.

29.4. If the BAC determines that the Bidder with the Lowest Calculated Bid passes all the criteria for post-qualification, it shall declare the said bid as the LCRB, and recommend to the HoPE the award of contract to the said Bidder at its submitted price or its calculated bid price, whichever is lower.

29.5. A negative determination shall result in rejection of the Bidder’s Bid, in which event the Procuring Entity shall proceed to the next Lowest Calculated Bid with a fresh period to make a similar determination of that Bidder’s capabilities to perform satisfactorily. If the second Bidder, however, fails the post qualification, the procedure for post qualification shall be repeated for the Bidder with the next Lowest Calculated Bid, and so on until the LCRB is determined for recommendation for contract award.29.6. Within a period not exceeding fifteen (15) calendar days from the determination by the BAC of the LCRB and the recommendation to award

57

the contract, the HoPE or his duly authorized representative shall approve or disapprove the said recommendation.

29.7. In the event of disapproval, which shall be based on valid, reasonable, and justifiable grounds as provided for under Section 41 of the IRR of RA 9184, the HoPE shall notify the BAC and the Bidder in writing of such decision and the grounds for it. When applicable, the BAC shall conduct a post-qualification of the Bidder with the next Lowest Calculated Bid. A request for reconsideration may be filed by the bidder with the HoPE in accordance with Section 37.1.3 of the IRR of RA 9184.

30. Reservation Clause

30.1. Notwithstanding the eligibility or post-qualification of a Bidder, the Procuring Entity concerned reserves the right to review its qualifications at any stage of the procurement process if it has reasonable grounds to believe that a misrepresentation has been made by the said Bidder, or that there has been a change in the Bidder’s capability to undertake the project from the time it submitted its eligibility requirements. Should such review uncover any misrepresentation made in the eligibility and bidding requirements, statements or documents, or any changes in the situation of the Bidder which will affect its capability to undertake the project so that it fails the preset eligibility or bid evaluation criteria, the Procuring Entity shall consider the said Bidder as ineligible and shall disqualify it from submitting a bid or from obtaining an award or contract.

30.2. Based on the following grounds, the Procuring Entity reserves the right to reject any and all bids, declare a Failure of Bidding at any time prior to the contract award, or not to award the contract, without thereby incurring any liability, and make no assurance that a contract shall be entered into as a result of the bidding:

(a) If there is prima facie evidence of collusion between appropriate public officers or employees of the Procuring Entity, or between the BAC and any of the Bidders, or if the collusion is between or among the bidders themselves, or between a Bidder and a third party, including any act which restricts, suppresses or nullifies or tends to restrict, suppress or nullify competition;

(b) If the Procuring Entity’s BAC is found to have failed in following the prescribed bidding procedures; or

(c) For any justifiable and reasonable ground where the award of the contract will not redound to the benefit of the GOP as follows:

58

(i) If the physical and economic conditions have significantly changed so as to render the project no longer economically, financially or technically feasible as determined by the HoPE;

(ii) If the project is no longer necessary as determined by the HoPE; and

(iii) If the source of funds for the project has been withheld or reduced through no fault of the Procuring Entity.

30.3. In addition, the Procuring Entity may likewise declare a failure of bidding when:

(a) No bids are received;

(b) All prospective Bidders are declared ineligible;

(c) All bids fail to comply with all the bid requirements or fail post-qualification; or

(d) The bidder with the LCRB refuses, without justifiable cause to accept the award of contract, and no award is made in accordance with Section 40 of the IRR of RA 9184.

F. Award of Contract

31. Contract Award

31.1. Subject to ITB Clause 29, the HoPE or its duly authorized representative shall award the contract to the Bidder whose bid has been determined to be the LCRB.

31.2. Prior to the expiration of the period of bid validity, the Procuring Entity shall notify the successful Bidder in writing that its bid has been accepted, through a Notice of Award duly received by the Bidder or its representative personally or sent by registered mail or electronically, receipt of which must be confirmed in writing within two (2) days by the Bidder with the LCRB and submitted personally or sent by registered mail or electronically to the Procuring Entity.

31.3. Notwithstanding the issuance of the Notice of Award, award of contract shall be subject to the following conditions:

(a) Submission of the following documents within ten (10) calendar days from receipt of the Notice of Award:

(i) Valid JVA, if applicable; or

59

(ii) In the case of procurement by a Philippine Foreign Service Office or Post, the PhilGEPS Registration Number of the winning foreign Bidder;

(b) Posting of the performance security in accordance with ITB Clause 33;

(c) Signing of the contract as provided in ITB Clause 32; and

(d) Approval by higher authority, if required, as provided in Section 37.3 of the IRR of RA 9184.

31.4. At the time of contract award, the Procuring Entity shall not increase or decrease the quantity of goods originally specified in SectionVI. Schedule of Requirements.

32. Signing of the Contract

32.1. At the same time as the Procuring Entity notifies the successful Bidder that its bid has been accepted, the Procuring Entity shall send the Contract Form to the Bidder, which contract has been provided in the Bidding Documents, incorporating therein all agreements between the parties.

32.2. Within ten (10) calendar days from receipt of the Notice of Award, the successful Bidder shall post the required performance security, sign and date the contract and return it to the Procuring Entity.

32.3. The Procuring Entity shall enter into contract with the successful Bidder within the same ten (10) calendar day period provided that all the documentary requirements are complied with.

32.4. The following documents shall form part of the contract:

(a) Contract Agreement;

(b) Bidding Documents;

(c) Winning bidder’s bid, including the Technical and Financial Proposals, and all other documents/statements submitted (e.g., bidder’s response to request for clarifications on the bid), including corrections to the bid, if any, resulting from the Procuring Entity’s bid evaluation;

(d) Performance Security;

(e) Notice of Award of Contract; and

(f) Other contract documents that may be required by existing laws and/or specified in the BDS.

33. Performance Security

60

33.1. To guarantee the faithful performance by the winning Bidder of its obligations under the contract, it shall post a performance security within a maximum period of ten (10) calendar days from the receipt of the Notice of Award from the Procuring Entity and in no case later than the signing of the contract.

33.2. The Performance Security shall be denominated in Philippine Pesos and posted in favor of the Procuring Entity in an amount not less than the percentage of the total contract price in accordance with the following schedule:

Form of Performance SecurityAmount of Performance Security(Not less than the Percentage of

the Total Contract Price)(a) Cash or

cashier’s/manager’s check issued by a Universal or Commercial Bank.

For biddings conducted by the LGUs, the Cashier’s/Manager’s Check may be issued by other banks certified by the BSP as authorized to issue such financial instrument.

Five percent (5%)

(b) Bank draft/guarantee or irrevocable letter of credit issued by a Universal or Commercial Bank: Provided, however, that it shall be confirmed or authenticated by a Universal or Commercial Bank, if issued by a foreign bank.

For biddings conducted by the LGUs, the Bank Draft/ Guarantee or Irrevocable Letter of Credit may be issued by other banks certified by the BSP as authorized to issue such financial instrument.

(c) Surety bond callable upon demand issued by a surety or insurance company duly certified by the Insurance Commission as authorized to issue such security.

Thirty percent (30%)

61

33.3. Failure of the successful Bidder to comply with the above-mentioned requirement shall constitute sufficient ground for the annulment of the award and forfeiture of the bid security, in which event the Procuring Entity shall have a fresh period to initiate and complete the post qualification of the second Lowest Calculated Bid. The procedure shall be repeated until the LCRB is identified and selected for recommendation of contract award. However if no Bidder passed post-qualification, the BAC shall declare the bidding a failure and conduct a re-bidding with re-advertisement, if necessary.

34. Notice to Proceed

Within seven (7) calendar days from the date of approval of the contract by the appropriate government approving authority, the Procuring Entity shall issue the Notice to Proceed (NTP) together with a copy or copies of the approved contract to the successful Bidder. All notices called for by the terms of the contract shall be effective only at the time of receipt thereof by the successful Bidder.

35. Protest Mechanism

Decisions of the procuring entity at any stage of the procurement process may be questioned in accordance with Section 55 of the IRR of RA 9184.

62

Section III. Bid Data Sheet

63

Bid Data Sheet

ITB Clause

1.1 The Procuring Entity is OFFICE OF THE SOLICITOR GENERAL

1.2

The identification number of the Contract is Lot 1: Renewal and Upgrade of Existing Virtual Machine Software; Lot 2: Endpoint Desktop Management System; and Lot 3: Fiber Optic Upgrade and OSG Data Center Cabling Rehabilitation all under OSG PR No. 018-10-368 .

The lot(s) and reference is/are:

Lot 1, Lot 2 & Lot 3: OSG PR No. 018-10-368

2

The Funding Source is:

The Government of the Philippines (GOP) through FY 2018 General Appropriations Act, R.A. 10964 in the amount of:

Lot 1: 2,800,000.00 – Renewal and Upgrade of Existing Virtual ₱Machine

SoftwareLot 2: 2,200,000.00 – Endpoint Desktop Management SystemLot 3: 1,800,000.00 – Fiber Optic Upgrade and OSG Data Center Cabling

RehabilitationTOTAL: 6,800,000.00 ₱ (inclusive of all government taxes)

The name of the Project is:


3.1 No further instructions.


5.2Foreign bidders, except those falling under ITB Clause (b), may not participate in this Project.

5.4The Bidder must have completed, within the period specified in the Invitation to Bid and ITB Clause 12.1(a)(ii), a single contract that is similar to this Project, equivalent to at least fifty percent (50%) of the ABC.

7 No further instructions.

8.1 Subcontracting is not allowed.

8.2 Not applicable.

64

9.1The Procuring Entity will hold a pre-bid conference for this Project on October 30, 2018 at 2:30pm at the Padilla Hall, 9th Flr., OSG Bldg., 134 Amorsolo St., Legaspi Village, Makati City.

10.1

The Procuring Entity’s address is:

OSG Building, 134 Amorsolo St., Legaspi Village, Makati City

Jane J. BurigsayMember, BAC Secretariat

Telephone Nos. 9881-674 local 789; 9881-693Email address: [email protected]

12.1(a) No further instructions.

12.1(a)(ii)

The bidder’s SLCC similar to the contract to be bid should have been completed within:Lot 1: three (3) yearsLot 2: three (3) yearsLot 3: five (5) yearsprior to the deadline for the submission and receipt of bids.

13.1 No additional requirements.

(b) No further instructions.

13.1(c) No additional requirements.

13.2

The ABC is:




Any bid with a financial component exceeding this amount shall not be accepted.

15.4(a)(iv) No incidental services are required.

(b) Not applicable.

(b)The Bid prices for Goods supplied from outside of the Philippines shall be quoted in Philippine Pesos.

16.3 Payment shall be made in Philippine Pesos

17.1 Bids will be valid until 120 calendar days.

65

18.1

The bid security shall be in the form of a Bid Securing Declaration, or any of the following forms and amounts:

1. If the bid security is in cash, cashier’s/manager’s check, bank draft/guarantee or irrevocable letter of credit, the amount shall not be less than:

2% of the ABCLot 1 56,000.00₱Lot 2 44,000.00Lot 3 36,000.00

2. If the bid security is in Surety Bond, the amount shall not be less than:

5% of the ABCLot 1 140,000.00₱Lot 2 110,000.00Lot 3 90,000.00

18.2The bid security shall be valid until 120 calendar days from date of opening of bids.

20.3

Each Bidder shall submit one (1) original and two (2) copies of the first and second components of its bid.

Note: All eligibility documents not original shall be certified by the originating/issuing agencies or, the bidder may bring the original copies for comparison and validation purposes.

21

The address for submission of bids is:

Administrative Division2nd Flr., OSG Bldg., 134 Amorsolo St., Legaspi Village, Makati City

The deadline for submission of bids is:

November 12, 2018 @ 2:25pm.

24.1

The place of bid opening is:

Padilla Hall, 9th Flr., OSG Bldg.,134 Amorsolo St., Legaspi Village, Makati City.

The date and time of bid opening is:

November 12, 2018 @ 2:30pm.




66

28.3 (a) Each item to be evaluated and compared with other Bids separately and recommended for contract award separately.

Partial bids are allowed. The goods are grouped in lots listed below. Bidders shall have the option of submitting a proposal on any or all of lots and evaluation and contract award will be undertaken on a per lot basis. Lots shall not be divided further into sub-lots for the purpose of bidding, evaluation, and contract award.

In all cases, the NFCC computation, if applicable, must be sufficient for all the lots or contracts to be awarded to the Bidder.





29.2Must present the licenses and certifications required in the Terms of Reference.

(f) Including the Terms of Reference and Supplemental Bid Bulletin, if any.

67

Section IV. General Conditions of Contract

68

TABLE OF CONTENTS

1. DEFINITIONS...............................................................70

2. CORRUPT, FRAUDULENT, COLLUSIVE, AND COERCIVE PRACTICES 71

3. INSPECTION AND AUDIT BY THE FUNDING SOURCE..............72

4. GOVERNING LAW AND LANGUAGE...............................72

5. NOTICES........................................................73

6. SCOPE OF CONTRACT............................................73

7. SUBCONTRACTING...............................................73

8. PROCURING ENTITY’S RESPONSIBILITIES........................74

9. PRICES..........................................................74

10. PAYMENT.......................................................74

11. ADVANCE PAYMENT AND TERMS OF PAYMENT..................75

12. TAXES AND DUTIES.............................................76

13. PERFORMANCE SECURITY.......................................76

14. USE OF CONTRACT DOCUMENTS AND INFORMATION.............76

15. STANDARDS.....................................................77

16. INSPECTION AND TESTS.........................................77

17. WARRANTY.....................................................78

18. DELAYS IN THE SUPPLIER’S PERFORMANCE......................78

19. LIQUIDATED DAMAGES..........................................79

20. SETTLEMENT OF DISPUTES......................................79

21. LIABILITY OF THE SUPPLIER....................................80

22. FORCE MAJEURE................................................80

69

23. TERMINATION FOR DEFAULT....................................81

24. TERMINATION FOR INSOLVENCY.................................81

25. TERMINATION FOR CONVENIENCE...............................82

26. TERMINATION FOR UNLAWFUL ACTS............................82

27. PROCEDURES FOR TERMINATION OF CONTRACTS................83

28. ASSIGNMENT OF RIGHTS........................................84

29. CONTRACT AMENDMENT........................................84

30. APPLICATION...................................................84

70

1. Definitions

1.1. In this Contract, the following terms shall be interpreted as indicated:

(a) “The Contract” means the agreement entered into between the Procuring Entity and the Supplier, as recorded in the Contract Form signed by the parties, including all attachments and appendices thereto and all documents incorporated by reference therein.

(b) “The Contract Price” means the price payable to the Supplier under the Contract for the full and proper performance of its contractual obligations.

(c) “The Goods” means all of the supplies, equipment, machinery, spare parts, other materials and/or general support services which the Supplier is required to provide to the Procuring Entity under the Contract.

(d) “The Services” means those services ancillary to the supply of the Goods, such as transportation and insurance, and any other incidental services, such as installation, commissioning, provision of technical assistance, training, and other such obligations of the Supplier covered under the Contract.

(e) “GCC” means the General Conditions of Contract contained in this Section.

(f) “SCC” means the Special Conditions of Contract.

(g) “The Procuring Entity” means the organization purchasing the Goods, as named in the SCC.

(h) “The Procuring Entity’s country” is the Philippines.

(i) “The Supplier” means the individual contractor, manufacturer distributor, or firm supplying/manufacturing the Goods and Services under this Contract and named in the SCC.

(j) The “Funding Source” means the organization named in the SCC.

(k) “The Project Site,” where applicable, means the place or places named in the SCC.

(l) “Day” means calendar day.

(m) The “Effective Date” of the contract will be the date of signing the contract, however the Supplier shall commence performance of its obligations only upon receipt of the Notice to Proceed and copy of the approved contract.

71

(n) “Verified Report” refers to the report submitted by the Implementing Unit to the HoPE setting forth its findings as to the existence of grounds or causes for termination and explicitly stating its recommendation for the issuance of a Notice to Terminate.

2. Corrupt, Fraudulent, Collusive, and Coercive Practices

2.1. Unless otherwise provided in the SCC, the Procuring Entity as well as the bidders, contractors, or suppliers shall observe the highest standard of ethics during the procurement and execution of this Contract. In pursuance of this policy, the Procuring Entity:

(a) defines, for the purposes of this provision, the terms set forth below as follows:

(i) "corrupt practice" means behavior on the part of officials in the public or private sectors by which they improperly and unlawfully enrich themselves, others, or induce others to do so, by misusing the position in which they are placed, and it includes the offering, giving, receiving, or soliciting of anything of value to influence the action of any such official in the procurement process or in contract execution; entering, on behalf of the Government, into any contract or transaction manifestly and grossly disadvantageous to the same, whether or not the public officer profited or will profit thereby, and similar acts as provided in Republic Act 3019.

(ii) "fraudulent practice" means a misrepresentation of facts in order to influence a procurement process or the execution of a contract to the detriment of the Procuring Entity, and includes collusive practices among Bidders (prior to or after bid submission) designed to establish bid prices at artificial, non-competitive levels and to deprive the Procuring Entity of the benefits of free and open competition.

(iii) “collusive practices” means a scheme or arrangement between two or more Bidders, with or without the knowledge of the Procuring Entity, designed to establish bid prices at artificial, non-competitive levels.

(iv) “coercive practices” means harming or threatening to harm, directly or indirectly, persons, or their property to influence their participation in a procurement process, or affect the execution of a contract;

(v) “obstructive practice” is

(aa) deliberately destroying, falsifying, altering or concealing of evidence material to an administrative proceedings or investigation or making false statements to investigators in order to materially impede an administrative proceedings or investigation of the Procuring Entity or any foreign

72

government/foreign or international financing institution into allegations of a corrupt, fraudulent, coercive or collusive practice; and/or threatening, harassing or intimidating any party to prevent it from disclosing its knowledge of matters relevant to the administrative proceedings or investigation or from pursuing such proceedings or investigation; or

(bb) acts intended to materially impede the exercise of the inspection and audit rights of the Procuring Entity or any foreign government/foreign or international financing institution herein.

(b) will reject a proposal for award if it determines that the Bidder recommended for award has engaged in any of the practices mentioned in this Clause for purposes of competing for the contract.

2.2. Further the Funding Source, Borrower or Procuring Entity, as appropriate, will seek to impose the maximum civil, administrative and/or criminal penalties available under the applicable law on individuals and organizations deemed to be involved with any of the practices mentioned in GCC Clause (a).

3. Inspection and Audit by the Funding Source

The Supplier shall permit the Funding Source to inspect the Supplier’s accounts and records relating to the performance of the Supplier and to have them audited by auditors appointed by the Funding Source, if so required by the Funding Source.

4. Governing Law and Language

4.1. This Contract shall be interpreted in accordance with the laws of the Republic of the Philippines.

4.2. This Contract has been executed in the English language, which shall be the binding and controlling language for all matters relating to the meaning or interpretation of this Contract. All correspondence and other documents pertaining to this Contract exchanged by the parties shall be written in English.

5. Notices

5.1. Any notice, request, or consent required or permitted to be given or made pursuant to this Contract shall be in writing. Any such notice, request, or consent shall be deemed to have been given or made when received by the concerned party, either in person or through an

73

authorized representative of the Party to whom the communication is addressed, or when sent by registered mail, telex, telegram, or facsimile to such Party at the address specified in the SCC, which shall be effective when delivered and duly received or on the notice’s effective date, whichever is later.

5.2. A Party may change its address for notice hereunder by giving the other Party notice of such change pursuant to the provisions listed in the SCC for GCC Clause 5.1.

6. Scope of Contract

6.1. The Goods and Related Services to be provided shall be as specified in Section VI. Schedule of Requirements.

6.2. This Contract shall include all such items, although not specifically mentioned, that can be reasonably inferred as being required for its completion as if such items were expressly mentioned herein. Any additional requirements for the completion of this Contract shall be provided in the SCC.

7. Subcontracting

7.1. Subcontracting of any portion of the Goods, if allowed in the BDS, does not relieve the Supplier of any liability or obligation under this Contract. The Supplier will be responsible for the acts, defaults, and negligence of any subcontractor, its agents, servants or workmen as fully as if these were the Supplier’s own acts, defaults, or negligence, or those of its agents, servants or workmen.

7.2. If subcontracting is allowed, the Supplier may identify its subcontractor during contract implementation. Subcontractors disclosed and identified during the bidding may be changed during the implementation of this Contract. In either case, subcontractors must submit the documentary requirements under ITB Clause 12 and comply with the eligibility criteria specified in the BDS. In the event that any subcontractor is found by the Procuring Entity to be ineligible, the subcontracting of such portion of the Goods shall be disallowed.

8. Procuring Entity’s Responsibilities

8.1. Whenever the performance of the obligations in this Contract requires that the Supplier obtain permits, approvals, import, and other licenses from local public authorities, the Procuring Entity shall, if so

74

needed by the Supplier, make its best effort to assist the Supplier in complying with such requirements in a timely and expeditious manner.

8.2. The Procuring Entity shall pay all costs involved in the performance of its responsibilities in accordance with GCC Clause 6.

9. Prices

9.1. For the given scope of work in this Contract as awarded, all bid prices are considered fixed prices, and therefore not subject to price escalation during contract implementation, except under extraordinary circumstances and upon prior approval of the GPPB in accordance with Section 61 of R.A. 9184 and its IRR or except as provided in this Clause.

9.2. Prices charged by the Supplier for Goods delivered and/or services performed under this Contract shall not vary from the prices quoted by the Supplier in its bid, with the exception of any change in price resulting from a Change Order issued in accordance with GCC Clause 29.

10. Payment

10.1. Payments shall be made only upon a certification by the HoPE to the effect that the Goods have been rendered or delivered in accordance with the terms of this Contract and have been duly inspected and accepted. Except with the prior approval of the President no payment shall be made for services not yet rendered or for supplies and materials not yet delivered under this Contract. Ten percent (10%) of the amount of each payment shall be retained by the Procuring Entity to cover the Supplier’s warranty obligations under this Contract as described in GCC Clause 17.

10.2. The Supplier’s request(s) for payment shall be made to the Procuring Entity in writing, accompanied by an invoice describing, as appropriate, the Goods delivered and/or Services performed, and by documents submitted pursuant to the SCC provision for GCC Clause 6.2, and upon fulfillment of other obligations stipulated in this Contract.

10.3. Pursuant to GCC Clause 10.2, payments shall be made promptly by the Procuring Entity, but in no case later than sixty (60) days after submission of an invoice or claim by the Supplier. Payments shall be in accordance with the schedule stated in the SCC.

10.4. Unless otherwise provided in the SCC, the currency in which payment is made to the Supplier under this Contract shall be in Philippine Pesos.

75

10.5. Unless otherwise provided in the SCC, payments using Letter of Credit (LC), in accordance with the Guidelines issued by the GPPB, is allowed. For this purpose, the amount of provisional sum is indicated in the SCC. All charges for the opening of the LC and/or incidental expenses thereto shall be for the account of the Supplier.

11. Advance Payment and Terms of Payment

11.1. Advance payment shall be made only after prior approval of the President, and shall not exceed fifteen percent (15%) of the Contract amount, unless otherwise directed by the President or in cases allowed under Annex “D” of RA 9184.

11.2. All progress payments shall first be charged against the advance payment until the latter has been fully exhausted.

11.3. For Goods supplied from abroad, unless otherwise indicated in the SCC, the terms of payment shall be as follows:

(a) On Contract Signature: Fifteen Percent (15%) of the Contract Price shall be paid within sixty (60) days from signing of the Contract and upon submission of a claim and a bank guarantee for the equivalent amount valid until the Goods are delivered and in the form provided in Section VIII. Bidding Forms.

(b) On Delivery: Sixty-five percent (65%) of the Contract Price shall be paid to the Supplier within sixty (60) days after the date of receipt of the Goods and upon submission of the documents (i) through (vi) specified in the SCC provision on Delivery and Documents.

(c) On Acceptance: The remaining twenty percent (20%) of the Contract Price shall be paid to the Supplier within sixty (60) days after the date of submission of the acceptance and inspection certificate for the respective delivery issued by the Procuring Entity’s authorized representative. In the event that no inspection or acceptance certificate is issued by the Procuring Entity’s authorized representative within forty five (45) days of the date shown on the delivery receipt, the Supplier shall have the right to claim payment of the remaining twenty percent (20%) subject to the Procuring Entity’s own verification of the reason(s) for the failure to issue documents (vii) and (viii) as described in the SCC provision on Delivery and Documents.

12. Taxes and Duties

76

The Supplier, whether local or foreign, shall be entirely responsible for all the necessary taxes, stamp duties, license fees, and other such levies imposed for the completion of this Contract.

13. Performance Security

13.1. Within ten (10) calendar days from receipt of the Notice of Award from the Procuring Entity but in no case later than the signing of the contract by both parties, the successful Bidder shall furnish the performance security in any the forms prescribed in the ITB Clause 33.2.

13.2. The performance security posted in favor of the Procuring Entity shall be forfeited in the event it is established that the winning bidder is in default in any of its obligations under the contract.

13.3. The performance security shall remain valid until issuance by the Procuring Entity of the Certificate of Final Acceptance.

13.4. The performance security may be released by the Procuring Entity and returned to the Supplier after the issuance of the Certificate of Final Acceptance subject to the following conditions:

(a) There are no pending claims against the Supplier or the surety company filed by the Procuring Entity;

(b) The Supplier has no pending claims for labor and materials filed against it; and

(c) Other terms specified in the SCC.

13.5. In case of a reduction of the contract value, the Procuring Entity shall allow a proportional reduction in the original performance security, provided that any such reduction is more than ten percent (10%) and that the aggregate of such reductions is not more than fifty percent (50%) of the original performance security.

14. Use of Contract Documents and Information

14.1. The Supplier shall not, except for purposes of performing the obligations in this Contract, without the Procuring Entity’s prior written consent, disclose this Contract, or any provision thereof, or any specification, plan, drawing, pattern, sample, or information furnished by or on behalf of the Procuring Entity. Any such disclosure shall be made in confidence and shall extend only as far as may be necessary for purposes of such performance.

14.2. Any document, other than this Contract itself, enumerated in GCC Clause 14.1 shall remain the property of the Procuring Entity and shall be

77

returned (all copies) to the Procuring Entity on completion of the Supplier’s performance under this Contract if so required by the Procuring Entity.

15. Standards

The Goods provided under this Contract shall conform to the standards mentioned in Section VII. Technical Specifications; and, when no applicable standard is mentioned, to the authoritative standards appropriate to the Goods’ country of origin. Such standards shall be the latest issued by the institution concerned.

16. Inspection and Tests

16.1. The Procuring Entity or its representative shall have the right to inspect and/or to test the Goods to confirm their conformity to the Contract specifications at no extra cost to the Procuring Entity. The SCC and Section VII. Technical Specifications shall specify what inspections and/or tests the Procuring Entity requires and where they are to be conducted. The Procuring Entity shall notify the Supplier in writing in a timely manner, of the identity of any representatives retained for these purposes.

16.2. If applicable, the inspections and tests may be conducted on the premises of the Supplier or its subcontractor(s), at point of delivery, and/or at the goods’ final destination. If conducted on the premises of the Supplier or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring Entity. The Supplier shall provide the Procuring Entity with results of such inspections and tests.

16.3. The Procuring Entity or its designated representative shall be entitled to attend the tests and/or inspections referred to in this Clause provided that the Procuring Entity shall bear all of its own costs and expenses incurred in connection with such attendance including, but not limited to, all traveling and board and lodging expenses.

16.4. The Procuring Entity may reject any Goods or any part thereof that fail to pass any test and/or inspection or do not conform to the specifications. The Supplier shall either rectify or replace such rejected Goods or parts thereof or make alterations necessary to meet the specifications at no cost to the Procuring Entity, and shall repeat the test and/or inspection, at no cost to the Procuring Entity, upon giving a notice pursuant to GCC Clause 5.

16.5. The Supplier agrees that neither the execution of a test and/or inspection of the Goods or any part thereof, nor the attendance by the Procuring Entity or its representative, shall release the Supplier from any warranties or other obligations under this Contract.

78

17. Warranty

17.1. The Supplier warrants that the Goods supplied under the Contract are new, unused, of the most recent or current models, and that they incorporate all recent improvements in design and materials, except when the technical specifications required by the Procuring Entity provides otherwise.

17.2. The Supplier further warrants that all Goods supplied under this Contract shall have no defect, arising from design, materials, or workmanship or from any act or omission of the Supplier that may develop under normal use of the supplied Goods in the conditions prevailing in the country of final destination.

17.3. In order to assure that manufacturing defects shall be corrected by the Supplier, a warranty shall be required from the Supplier for a minimum period specified in the SCC. The obligation for the warranty shall be covered by, at the Supplier’s option, either retention money in an amount equivalent to at least one percent (1%) of every progress payment, or a special bank guarantee equivalent to at least one percent (1%) of the total Contract Price or other such amount if so specified in the SCC. The said amounts shall only be released after the lapse of the warranty period specified in the SCC; provided, however, that the Supplies delivered are free from patent and latent defects and all the conditions imposed under this Contract have been fully met.

17.4. The Procuring Entity shall promptly notify the Supplier in writing of any claims arising under this warranty. Upon receipt of such notice, the Supplier shall, within the period specified in the SCC and with all reasonable speed, repair or replace the defective Goods or parts thereof, without cost to the Procuring Entity.

17.5. If the Supplier, having been notified, fails to remedy the defect(s) within the period specified in GCC Clause 17.4, the Procuring Entity may proceed to take such remedial action as may be necessary, at the Supplier’s risk and expense and without prejudice to any other rights which the Procuring Entity may have against the Supplier under the Contract and under the applicable law.

18. Delays in the Supplier’s Performance

18.1. Delivery of the Goods and/or performance of Services shall be made by the Supplier in accordance with the time schedule prescribed by the Procuring Entity in Section VI. Schedule of Requirements.

18.2. If at any time during the performance of this Contract, the Supplier or its Subcontractor(s) should encounter conditions impeding timely delivery of the Goods and/or performance of Services, the Supplier shall promptly notify the Procuring Entity in writing of the fact of the delay, its likely duration and its cause(s). As soon as practicable after receipt of the

79

Supplier’s notice, and upon causes provided for under GCC Clause 22, the Procuring Entity shall evaluate the situation and may extend the Supplier’s time for performance, in which case the extension shall be ratified by the parties by amendment of Contract.

18.3. Except as provided under GCC Clause 22, a delay by the Supplier in the performance of its obligations shall render the Supplier liable to the imposition of liquidated damages pursuant to GCC Clause 19, unless an extension of time is agreed upon pursuant to GCC Clause 29 without the application of liquidated damages.

19. Liquidated Damages

Subject to GCC Clauses 18 and 22, if the Supplier fails to satisfactorily deliver any or all of the Goods and/or to perform the Services within the period(s) specified in this Contract inclusive of duly granted time extensions if any, the Procuring Entity shall, without prejudice to its other remedies under this Contract and under the applicable law, deduct from the Contract Price, as liquidated damages, the applicable rate of one tenth (1/10) of one (1) percent of the cost of the unperformed portion for every day of delay until actual delivery or performance. The maximum deduction shall be ten percent (10%) of the amount of contract. Once the maximum is reached, the Procuring Entity may rescind or terminate the Contract pursuant to GCC Clause 23, without prejudice to other courses of action and remedies open to it.

20. Settlement of Disputes

20.1. If any dispute or difference of any kind whatsoever shall arise between the Procuring Entity and the Supplier in connection with or arising out of this Contract, the parties shall make every effort to resolve amicably such dispute or difference by mutual consultation.

20.2. If after thirty (30) days, the parties have failed to resolve their dispute or difference by such mutual consultation, then either the Procuring Entity or the Supplier may give notice to the other party of its intention to commence arbitration, as hereinafter provided, as to the matter in dispute, and no arbitration in respect of this matter may be commenced unless such notice is given.

20.3. Any dispute or difference in respect of which a notice of intention to commence arbitration has been given in accordance with this Clause shall be settled by arbitration. Arbitration may be commenced prior to or after delivery of the Goods under this Contract.

20.4. In the case of a dispute between the Procuring Entity and the Supplier, the dispute shall be resolved in accordance with Republic Act 9285 (“R.A. 9285”), otherwise known as the “Alternative Dispute Resolution Act of 2004.”

80

20.5. Notwithstanding any reference to arbitration herein, the parties shall continue to perform their respective obligations under the Contract unless they otherwise agree; and the Procuring Entity shall pay the Supplier any monies due the Supplier.

21. Liability of the Supplier

21.1. The Supplier’s liability under this Contract shall be as provided by the laws of the Republic of the Philippines, subject to additional provisions, if any, set forth in the SCC.

21.2. Except in cases of criminal negligence or willful misconduct, and in the case of infringement of patent rights, if applicable, the aggregate liability of the Supplier to the Procuring Entity shall not exceed the total Contract Price, provided that this limitation shall not apply to the cost of repairing or replacing defective equipment.

22. Force Majeure

22.1. The Supplier shall not be liable for forfeiture of its performance security, liquidated damages, or termination for default if and to the extent that the Supplier’s delay in performance or other failure to perform its obligations under the Contract is the result of a force majeure.

22.2. For purposes of this Contract the terms “force majeure” and “fortuitous event” may be used interchangeably. In this regard, a fortuitous event or force majeure shall be interpreted to mean an event which the Supplier could not have foreseen, or which though foreseen, was inevitable. It shall not include ordinary unfavorable weather conditions; and any other cause the effects of which could have been avoided with the exercise of reasonable diligence by the Supplier. Such events may include, but not limited to, acts of the Procuring Entity in its sovereign capacity, wars or revolutions, fires, floods, epidemics, quarantine restrictions, and freight embargoes.

22.3. If a force majeure situation arises, the Supplier shall promptly notify the Procuring Entity in writing of such condition and the cause thereof. Unless otherwise directed by the Procuring Entity in writing, the Supplier shall continue to perform its obligations under the Contract as far as is reasonably practical, and shall seek all reasonable alternative means for performance not prevented by the force majeure.

23. Termination for Default

81

23.1. The Procuring Entity shall terminate this Contract for default when any of the following conditions attends its implementation:

(a) Outside of force majeure, the Supplier fails to deliver or perform any or all of the Goods within the period(s) specified in the contract, or within any extension thereof granted by the Procuring Entity pursuant to a request made by the Supplier prior to the delay, and such failure amounts to at least ten percent (10%) of the contact price;

(b) As a result of force majeure, the Supplier is unable to deliver or perform any or all of the Goods, amounting to at least ten percent (10%) of the contract price, for a period of not less than sixty (60) calendar days after receipt of the notice from the Procuring Entity stating that the circumstance of force majeure is deemed to have ceased; or

(c) The Supplier fails to perform any other obligation under the Contract.

23.2. In the event the Procuring Entity terminates this Contract in whole or in part, for any of the reasons provided under GCC Clauses 23 to , the Procuring Entity may procure, upon such terms and in such manner as it deems appropriate, Goods or Services similar to those undelivered, and the Supplier shall be liable to the Procuring Entity for any excess costs for such similar Goods or Services. However, the Supplier shall continue performance of this Contract to the extent not terminated.

23.3. In case the delay in the delivery of the Goods and/or performance of the Services exceeds a time duration equivalent to ten percent (10%) of the specified contract time plus any time extension duly granted to the Supplier, the Procuring Entity may terminate this Contract, forfeit the Supplier's performance security and award the same to a qualified Supplier.

24. Termination for Insolvency

The Procuring Entity shall terminate this Contract if the Supplier is declared bankrupt or insolvent as determined with finality by a court of competent jurisdiction. In this event, termination will be without compensation to the Supplier, provided that such termination will not prejudice or affect any right of action or remedy which has accrued or will accrue thereafter to the Procuring Entity and/or the Supplier.

25. Termination for Convenience

25.1. The Procuring Entity may terminate this Contract, in whole or in part, at any time for its convenience. The HoPE may terminate a contract for the convenience of the Government if he has determined the existence

82

of conditions that make Project Implementation economically, financially or technically impractical and/or unnecessary, such as, but not limited to, fortuitous event(s) or changes in law and national government policies.

25.2. The Goods that have been delivered and/or performed or are ready for delivery or performance within thirty (30) calendar days after the Supplier’s receipt of Notice to Terminate shall be accepted by the Procuring Entity at the contract terms and prices. For Goods not yet performed and/or ready for delivery, the Procuring Entity may elect:

(a) to have any portion delivered and/or performed and paid at the contract terms and prices; and/or

(b) to cancel the remainder and pay to the Supplier an agreed amount for partially completed and/or performed goods and for materials and parts previously procured by the Supplier.

25.3. If the Supplier suffers loss in its initial performance of the terminated contract, such as purchase of raw materials for goods specially manufactured for the Procuring Entity which cannot be sold in open market, it shall be allowed to recover partially from this Contract, on a quantum meruit basis. Before recovery may be made, the fact of loss must be established under oath by the Supplier to the satisfaction of the Procuring Entity before recovery may be made.

26. Termination for Unlawful Acts

26.1. The Procuring Entity may terminate this Contract in case it is determined prima facie that the Supplier has engaged, before or during the implementation of this Contract, in unlawful deeds and behaviors relative to contract acquisition and implementation. Unlawful acts include, but are not limited to, the following:

(a) Corrupt, fraudulent, and coercive practices as defined in ITB Clause (a);

(b) Drawing up or using forged documents;

(c) Using adulterated materials, means or methods, or engaging in production contrary to rules of science or the trade; and

(d) Any other act analogous to the foregoing.

27. Procedures for Termination of Contracts

27.1. The following provisions shall govern the procedures for termination of this Contract:

83

(a) Upon receipt of a written report of acts or causes which may constitute ground(s) for termination as aforementioned, or upon its own initiative, the Implementing Unit shall, within a period of seven (7) calendar days, verify the existence of such ground(s) and cause the execution of a Verified Report, with all relevant evidence attached;

(b) Upon recommendation by the Implementing Unit, the HoPE shall terminate this Contract only by a written notice to the Supplier conveying the termination of this Contract. The notice shall state:

(i) that this Contract is being terminated for any of the ground(s) afore-mentioned, and a statement of the acts that constitute the ground(s) constituting the same;

(ii) the extent of termination, whether in whole or in part;

(iii) an instruction to the Supplier to show cause as to why this Contract should not be terminated; and

(iv) special instructions of the Procuring Entity, if any.

(c) The Notice to Terminate shall be accompanied by a copy of the Verified Report;

(d) Within a period of seven (7) calendar days from receipt of the Notice of Termination, the Supplier shall submit to the HoPE a verified position paper stating why this Contract should not be terminated. If the Supplier fails to show cause after the lapse of the seven (7) day period, either by inaction or by default, the HoPE shall issue an order terminating this Contract;

(e) The Procuring Entity may, at any time before receipt of the Supplier’s verified position paper described in item (d) above withdraw the Notice to Terminate if it is determined that certain items or works subject of the notice had been completed, delivered, or performed before the Supplier’s receipt of the notice;

(f) Within a non-extendible period of ten (10) calendar days from receipt of the verified position paper, the HoPE shall decide whether or not to terminate this Contract. It shall serve a written notice to the Supplier of its decision and, unless otherwise provided, this Contract is deemed terminated from receipt of the Supplier of the notice of decision. The termination shall only be based on the ground(s) stated in the Notice to Terminate;

(g) The HoPE may create a Contract Termination Review Committee (CTRC) to assist him in the discharge of this function. All decisions recommended by the CTRC shall be subject to the approval of the HoPE; and

84

(h) The Supplier must serve a written notice to the Procuring Entity of its intention to terminate the contract at least thirty (30) calendar days before its intended termination. The Contract is deemed terminated if it is not resumed in thirty (30) calendar days after the receipt of such notice by the Procuring Entity.

28. Assignment of Rights

The Supplier shall not assign his rights or obligations under this Contract, in whole or in part, except with the Procuring Entity’s prior written consent.

29. Contract Amendment

Subject to applicable laws, no variation in or modification of the terms of this Contract shall be made except by written amendment signed by the parties.

30. Application

These General Conditions shall apply to the extent that they are not superseded by provisions of other parts of this Contract.

85

Section V. Special Conditions of Contract

86

Special Conditions of Contract

87

GCC Clause

(g) The Procuring Entity is OFFICE OF THE SOLICITOR GENERAL.

(i) The Supplier is ___________________________________________

(j)

The Funding Source is:

the Government of the Philippines (GOP) through FY 2018 General Appropriations Act, R.A. 10964 in the amount of:




for the:Procurement of ICT Subscriptions

(k)The Project Site is OSG Building, 134 Amorsolo St., Legaspi Village, Makati City and extension offices located at the nearby APMC and Montepino Buildings.


5.1

The Procuring Entity’s address for Notices is:

OSG Building, 134 Amorslo St., Legaspi Village, Makati City

Jane J. BurigsayTelephone Nos. 9881-789

Email address: [email protected]

The Supplier’s address for Notices is: _________________________

Delivery and Documents –

“The delivery terms applicable to this Contract are delivered to OSG Building, 134 Amorsolo St., Legaspi Village, Makati City. Risk and title will pass from the Supplier to the Procuring Entity upon receipt and final acceptance of the Goods at their final destination.”

Delivery of the Goods shall be made by the Supplier in accordance with the terms specified in Section VI. Schedule of Requirements. The details of shipping and/or other documents to be furnished by the Supplier are as follows:

6.2Upon delivery of the Goods to the Project Site, the Supplier shall notify the Procuring Entity and present the following documents to the Procuring Entity:

88

mailto:[email protected]

(i) Original and four (4) copies of the Supplier’s invoice showing Goods’ description, quantity, unit price, and total amount;

(ii) Original four (4) copies of delivery receipt/note, railway receipt, or truck receipt;

(iii) Original Supplier’s inspection report;(iv) Original and four (4) copies of the

Manufacturer’s and/or Supplier’s warranty certificate;(v) Original and four (4) copies of the certificate of

original (for imported Goods);(vi) Delivery receipt detailing number and

description of items received signed by the authorized receiving personnel;

(vii) Certificate of Acceptance/Inspection Report signed by the Procuring Entity’s representative at the Project Site; and

(viii) Four (4) copies of the Invoice Receipt for Property signed by the Procuring Entity’s representative at the Project Site.

Incidental Services –

The Supplier is required to provide all of the following services, including additional services, if any, specified in Section VI. Schedule of Requirements:

(a) Performance and supervision of on-site assembly and/or start-up of the supplied Goods;

(b) Furnishing of tools required for assembly and/or maintenance of the supplied Goods;

(c) Furnishing of a detailed operations and maintenance manual for each appropriate unit of the supplied Goods;

(d) Performance or supervision or maintenance and/or repair of the supplied Goods, for a period of time agreed by the parties, provided that this service shall not relieve the Supplier of any warranty obligations under this Contract; and

(e) Training of the Procuring Entity’s personnel, at the Supplier’s plant and/or on-site, in assembly, start-up, operation, maintenance, and/or repair of the supplied Goods.

The Contract price for the Goods shall include the prices charged by the Supplier for incidental services and shall not exceed the prevailing rates charged to other parties by the Supplier for similar services.

Spare Parts –

The Supplier is required to provide all of the following materials notifications, and information pertaining to spare parts manufactured or distributed by the Supplier:

89

(a) Such spare parts as the Procuring Entity may elect to purchase from the Supplier, provided that this election shall not relieve the Supplier of any warranty obligations under this Contract.

The spare parts required are listed in Section VI. Schedule of Requirements and the cost thereof are included in the Contract Price.

The Supplier shall carry sufficient inventories to assure ex-stock supply of consumable spares for the Goods for two (2) years beyond the warranty.

The spare parts and components shall be supplied as promptly as possible, but in any case within one (1) month of placing the order.

Packaging –

The Supplier shall provide such packaging of the Goods as is required to prevent their damage or deterioration during transit to their final destination, as indicated in this Contract. The packaging shall be sufficient to withstand, without limitation, rough handling during transit and exposure to extreme temperatures, salt and precipitation during transit, and open storage. Packaging case size and weights shall take into consideration, where appropriate, the remoteness of the GOODS’ final destination and the absence of heavy handling facilities at all points in transit.

A packaging list identifying the contents and quantities of the package is to be placed on an accessible point of the outer packaging if practical. If not practical, the packaging list is to be placed inside the outer packaging but outside the secondary packaging.

Insurance –

The Goods supplied under this Contract shall be fully insured by the Supplier in a freely convertible currency against loss or damage incidental to manufacture or acquisition, transportation, storage, and delivery. The Goods remain at the risk and title of the Supplier until their final acceptance by the Procuring Entity.

Transportation –

Where the Supplier is required under Contract to deliver the Goods CIF, CIP or DDP, transport of the Goods to the port of destination or such other named place of destination in the Philippines, as shall be specified in this Contract, shall be arranged and paid for by the Supplier, and the cost thereof shall be included in the Contract Price.

Where the Supplier is required under this Contract to transport the Goods to a specified place of destination within the Philippines, defined as the

90

Project Site, transport to such place of destination in the Philippines, including insurance and storage, as shall be specified in this Contract, shall be arranged by the Supplier, and related costs shall be included in the Contract Price.

Where the Supplier is required under this Contract to deliver the Goods CIF, CIP or DDP, Goods are to be transported on carriers of Philippine registry. In the event that no carrier of Philippine registry is available, Goods may be shipped by a carrier which is not of Philippine registry provided that the Supplier obtains and presents to the Procuring Entity certification to this effect from the nearest Philippine consulate to the port of dispatch. In the event that carriers of Philippine registry are available but their schedule delays the Supplier in its performance of this Contract, the period from when the Goods were first ready for shipment and the actual date of shipment, the period of delay will be considered force majeure in accordance with GCC Clause 22.

The Procuring Entity accepts no liability for the damage of Goods during transit other than those prescribed by INCOTERMS for DDP Deliveries. In the case of Goods supplied from within the Philippines or supplied by domestic Suppliers, risk and title will not be deemed to have passed to the Procuring Entity until their receipt and final acceptance at the final destination.

Patent Rights –

The Supplier shall indemnify the Procuring Entity against all third-party claims of infringement of patent, trademark, or industrial design rights arising from use of the Goods or any part thereof.

10.4 Not applicable.10.5 Payment using LC is not allowed.11.3 Maintain the GCC Clause.(c) No further instructions.16.1 As the need arises.17.3 Please refer to Terms of Reference17.4 Please refer to Terms of Reference21.1 No additional provision.

91

Section VI. Schedule of Requirements

92

Section VI. Schedule of Requirements

The delivery schedule expressed as weeks/months stipulates hereafter a delivery date which is the date of delivery to the project site.

Item No.

Description Quantity TotalDelivered,

Weeks/Months

Information and Communication Technology (ICT) Subscriptions:

Within 30 days from receipt of NTP

1.Lot 1: Renewal and Upgrade of

Existing Virtual Machine Software

1

32.Lot 2: Endpoint Desktop

Management System1

3.Lot 3: Fiber Optic Upgrade and

OSG Data Center Cabling Rehabilitation

1

Conforme: _____________________________________________________________(Name/Signature)

Designation/Position: _____________________________________________________________

Company: _____________________________________________________________

Address of the Company: _____________________________________________________________

Tel. No./ E-mail Address: _____________________________________________________________

Date: _____________________________________________________________

93

Section VII. Technical Specifications

94

Technical Specifications

Item Specifications Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidder’s statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii)

95

Technical Specifications


Lot 1: Virtual Machine Software

I. Five (5) New Licenses of Virtualization Software with Operations Management Enterprise Plus for 1 Processor

ITEM SPECIFICATION / PARTICULARStatement

of Compliance

1. Supply of 5 New Latest version of Virtual Licenses 2. Must be the industry leading virtualization platform3. Must be unified, easy to use operations management4. Must have no reliance on general purpose Operating

System/s.5. Must have a simplified patching technology with no

unrelated patching; automated, image basedand with rollback capabilities.

6. Should be able to do advanced memory management like TPS, Ballooning and Memory Compression.

7. Must fully support if not all, majority of existing operating systems available in the market.

8. Must be able to provide zero downtime for applications running with at most 4 vCPUs.

9. Must have a disk footprint that does not exceed 200MB.

10. Must be able to support relocation of applications between data centers.

11. Must have a bundled performance monitoring and analytics tool.

12. Must be able to do capacity management including right-sizing, metering and optimization.

13. Must be able to provide a tool for creating capacity models or what-if analysis.

14. Must be able to provide root-cause analysis, recommendation.

15. Must have a self-learning analytics technology with dynamic thresholds

16. Performance monitoring and analytics tool should be able to integrate with identity sources for easier user access delegation.

17. Must simplifies and enhances virtual-machine networking in virtual environments and enables those environments to use third-party distributed virtual switches.

96

18. Must include Support and Subscription Service for 1 year

19. Must include 12x5 access to support (phone and email)20. Must include Phone and Email Remote Support services21. Must have online access to documentation, knowledge

base articles, discussion forums and other technical resources

22. Must provide product updates and upgrades23. Must have a target response time based on the

severity level:Severity 1 (Critical) – 4 business hoursSeverity 2 (Major) – 8 business hoursSeverity 3 (Minor) – 12 business hoursSeverity 4 (Cosmetic) – 12 business hours

24. Must be compatible with existing VM Software use by the OSG

II. Renewal of the existing 12 Licenses of Virtual Machine Software

ITEM SPECIFICATION / PARTICULAR

Statement of

Compliance1. 1 Year Support and Subscription Service renewal of

existing 12 Virtual Infrastructure from 31-DEC-18 to 30-DEC-19

2. Must include 12x5 access to support services (phone and email)

3. Must include Phone and Email Remote Support services 4. Must have online access to documentation, knowledge


5. Must provide product updates and upgrades6. Must have a target response time based on the severity

level:Severity 1 (Critical) – 4 business hoursSeverity 2 (Major) – 8 business hoursSeverity 3 (Minor) – 12 business hoursSeverity 4 (Cosmetic) – 12 business hours

III. Renewal of the existing 5 License of Virtual Machine Software with Operations Management Enterprise


Statement of


existing 12 Virtual Infrastructure from 21-DEC-18 to 30-DEC-19

97






IV. Renewal of the existing 1 License of Virtual Machine Server 6 Standard


Statement of


existing 1 license of centralized and extensible platform for managing virtual environment from 31-DEC-18 to 30-DEC-19







V. Software Maintenance and Technical Support for a period of 12 months


Statement of

Compliance

98

1. The bidder must have an 8 hours x 5 days helpdesk phone and email technical support with two (2) hours response time for incidents related to the VMWare Software Licenses listed in Technical requirements.

2. The bidder must provide 8 hours x 5 days onsite technical support with two (2) hours response time for critical incidents. Critical incidents are defined as incidents which prevent OSG from successfully providing IT services due to failure of systems running on VMWare software.

3. The bidder should address unlimited number of support request escalated by OSG.

4. The bidder must provide onsite support for installation and deployment of software patches and version upgrade.

5. The bidder must provide access to VMWare portal for download of latest product contents, patches, updates/upgrades including extensive online-self-help resources and knowledge base. Advisory to patches and fixes shall also be provided.

6. The bidder must provide a procedure on support and problem escalation.

7. The bidder must perform system health checks twice a year.

8. The bidder must provide full documentation for Activity Plan on installation of patches and upgrades and Root Cause Analysis for incident encountered.

9. The bidder must provide certificate for the above services as part of technical requirements.

99

Lot 2: Endpoint Desktop Management System Technical Specifications:

ITEM SPECIFICATIONStatement

of Compliance

AGENT DEPLOYMENT

Deployment

Deploy Agent Remotely thru IP Address

Deploy Agent Remotely thru Active Directory

Deploy Agent thru Discovery Deploy Agent via URL Link

Agent Installer

Can Bind Administrator Credential inside the Agent package

Can Automatically group machine base in Agent package

Agent Icon can be hidden or change to reflect OSG logo

SUPPORTED DEVICES

Workstations, Servers Platform supported

Windows XP/Vista/7/8/8.1/10 Windows Server 2003/2008/2008

R2/2012/2012 R2/2016 Virtualization - VMWare/Hyper-V Apple OS X version 10.7.5

through 10.9 or above. Intel only The Linux agent only supports

Intel-based machines. SuSE Linux Enterprise (10, 11, 12), Red Hat Enterprise Linux (5, 6, 7), Ubuntu (10.04 LTS, 12.04 LTS, (16.04 LTS) are supported as a headless agent. User interface-based agent procedures will not work. OpenSuSE 12, and CentOS (5, 6, 7) are fully supported.

Network Devices – Routers, Switches, Printers and other IP-based devices.

AGENT PROCEDURE

Procedure Creation

Create IT Procedures/Scripts. Automatically distribute

procedures to manage machines, groups of machines within a Local Area Network and/or Remote systems.

Able to run CMD, PowerShell,

100


of Compliance

Batch File, VB script commands

AutomatedRemediation

Automatically run procedures triggered by an alert (via Real-time monitoring of critical applications, services, event logs) offering automated remediation of issues.

Scheduling Schedule procedures to run automatically

Application Deployment

Deploy Microsoft and non-Microsoft applications

Capability to assign software repository for local sourcing of installers.

Policy Enforcement/Configur

ation Management

Deploy and enforce system policies, configuration, e.g. block control panel, block USBs via Machine, groups of Machine within a Local Area Network and Remote systems.

File Distribution Automatically get and distribute files to and from systems connected locally and remotely.

PERFORMANCE AND NETWORK MONITORINGGeneral Features Solution should be able to monitor

processes and services Solution should be able to monitor

system performance such as CPU, Memory, Disk and Bandwidth Utilization

Solution should be able to monitor hardware and software changes

Solution should be able to monitor IP devices uptime and downtime

Solution should be able to monitor Windows, VMware, Linux, Cisco IOS and 20 other operating systems covering a wide range of networking devices, web, database and email servers, log files and Windows performance counters.

Solution should be able to trigger an alarm, file a ticket, send an email and run a procedure when an alert is detected

Solution should be able to display monitoring in a dashboard

101


of Compliance

Solution should be able to provide reports of triggered alerts

Provides user defined real-time monitoring

Alerts Event Log Alerts Monitor sets SNMP sets System check Log monitoring

Monitoring of IP Devices Monitors changes in the

configuration of IT system and provides alerts if a change has occurred.

Provides alerts via tickets, email, dashboard or run a procedure.

Alert on specific file changes and protection violations.

Monitor devices online/offline status

Monitor system performance (CPU, Disk Space, Memory)

Monitor Processes Monitor Services Monitor Hardware and Software

Changes Alert message and recipient

configuration

Automated Network Discovery

Automatically discover all devices on the network

LAN monitoring alerts when new devices are detected

View all known and unknown devices

Dashboard

Offers view of alerts summary per system (device)

Ability to group systems together Customize alerts Offers Multi Router Traffic

Grapher (MRTG), Bandwidth consumption.

INVENTORY, ASSET DISCOVERY AND AUDITOffers comprehensive audit of each system – Hardware, Software Inventory.

Hardware Inventory Solution should be able to inventory hardware information

102


of Compliance

such as: System Information

(Manufacturer, Product Name, System Version, System Serial Number)

Chassis (Chassis Manufacturer, Chassis Type, Chassis Version, Chassis Serial Number, Chassis Asset Tag)

Network Information (IPv4 Address, IPv6 Address, Subnet Mask, Default Gateway, Connection Gateway, Country, IP Information Provider, MAC Address, DHCP Server, DNS Server)

Motherboard (Manufacturer, Product, Version, Serial Number, External Bus Speed)

BIOS Information (Vendor, Version, Release Date)

CPU/RAM Information (Processor Manufacturer, Processor Family, Processor Version, CPU Max Speed, CPU Current Speed, CPU, Quantity, Speed, RAM, Max Memory Size, Max Memory Slots)

On Board Devices Port Connectors Memory Devices per Slot System Slots Printers Installed on the

system PCI and Disk Hardware Disk Volumes Disk Partitions Disk Shares

Software inventory Solution should be able to inventory software information such as Software Licenses (Publisher,

Title, Product Key, License Key, Version)

Installed Applications

103


of Compliance

(Application, Description, Version, Manufacturer, Product Name, Directory Path, File Size, Last Modified)

Add/Remove (Application Name, Uninstall String)

Startup Apps (Application Name, Application Command, User Name)

Security Products (Product Type, Product Name, Manufacturer, Version, Active, Up to Date)

System Information

Solution should be able to inventory system information such as IP information DNS/DHCP server information Disk volume information

including drive letters Space available, volume

labels PCI and drive hardware

information including models, and user editable notes for each device

CPU and RAM information with specifics on, CPU speeds, models, number, and ram installed,

Printer information with Name, Port and Model

Custom Fields Can add additional information Manually or AutomaticallyPATCH MANAGEMENT

General Features System Compatibility. Whether, the application is agent-based or agent-less it should have a less impact on the performance, stability and compatibility with the current operating environment especially if this will be deployed across a large number of assets or machines.

Cross-platform support to patch Windows and Mac operating

104


of Compliance

systems. Ease of deployment and

maintenance. The easier the patch management solution is to deploy and maintain, the lower the implementation and ongoing maintenance costs to the organization.

Solution should be able to support non-Microsoft products for patching and is able to do seamless deployment of patches – similar approach to a Microsoft application.

Solution should use peer to peer technology in deploying patches

Solution should be able to automatically download Internet Based patches without worrying network congestion, even machines without direct access to Microsoft.

Solution should be able to support patching heterogeneous endpoints such as laptops, desktops, servers, and virtual machines.

Solution should have the capability to select type of patch to be downloaded (Critical, Security, hotfix, etc.)

Solution should have the capability to schedule a workstation/server reboot whenever patch requires a reboot.

Solution should be able to completely automate patching process.

Solution should be able to revert deployed patch.

Solution has the capability to create patch groups

Solution should be able to create test groups to test patches on a

105


of Compliance

small number of endpoints before approving them for deployment.

Solution should be able to throttle bandwidth when downloading patch to workstations/servers.

Solution should provide alerts / warnings like or not limited to email notification for new patches

Solution should be able to monitor direct patch fix of applications on the server.

Solution should provide description of the patch

Solution should be able to notify users about patch deployment via notification window

Audit Trail and Report. The solution should be able to provide a comprehensive logging facility.

Reports should be readily available on an on-demand or per need basis that will help the administrator keep track of the status of software fixes and patches on individual systems. Report can also be customized or tailored fit based on the requirement on-hand. Solution should provide reports not limited to updated and outdated endpoints, successful and unsuccessful patch count, patch status per endpoint or per group/batch etc.

Manage Machines Offers Scan machine, Patch

status, Schedule scan, Initial and automatic updates, Pre/Post procedure, Machine History

Manage Updates Ability to Machine/Patch updates, Provides Rollback Cancel Updates

106


of Compliance

Patch Policy Create/Delete Policies Approval by Policy Knowledge Based Override

Automatic and recurring patch scans

Secured or ad-hoc, Scans networks for installed and missing security patches, detects vulnerability, determines which patches are needed.

By computer, group or user defined collections of computers

Automates the tedious process of researching, identifies which patches are installed and date installed, Monitors and maintains patch compliance for entire enterprise

Centralized Management of

Patches

Does not require multiple patch servers

Ensures that all systems are protected, even remote users on laptops and workstations

Allows implementation across entire network

Always know what patches and security holes reside on each user’s system

Patch approval Approve or deny selected

patches Select by user defined computer

collections

Automated patch deployment

Schedule by time, computer, group or user defined collections of computers

Simultaneously deploy all required patches across operating systems

Single rollout strategy and policy enforcement

Maximize uptime

Interactive patch management

Select to deploy by patch or by computer

Select individual computers, groups or user defined collections of computers

Ad-hoc simultaneous deployment

107


of Compliance

of selected patches Across operating systems Across locations

Flexible configuration

Patch file location, Patch file parameters

Reboot actions and notifications, By computer, group or user defined collections of computers

Saves bandwidth, Security and policy control

Comprehensive reports

Graphical with drill-down, User defined

Scheduled, E-mail notification Export to HTML, Excel or Word

SOFTWARE MANAGEMENT Solution should be able to run

procedures triggered by an alert (via real-time monitoring of critical applications, services, event logs) offering automated remediation of issues

Solution should be capable to create customized IT Procedures / Scripts or use pre-configured procedures

Solution should be able to support execution of CMD, Powershell, Batch File and VB Script

Solution should be able to easily deploy 3rd party applications

Cross-platform support Windows

MAC Patches for 3rd party software is

included, if made available by 3rd-party software package developers

Profile base policy

- Scan and Analysis- Override- 3rd-Party Software- Deployment- Alerting

108


of Compliance

Scan and Analysis

Can Approve, Review and Reject Patch impact (Critical, Critical, Older than 30 days, Recommended, Virus Removal)

Schedule (Daily, Weekly, Monthly)

Override

Can Approve/Reject Specific KB Override

Can Approve/Reject Specific MS Override

Can Approve/Reject Specific CVE, Product, or Vendor

3rd-Party Software Deploy popular 3rd-party

software packages for both Windows and Apple operating systems

Deployment

Reboot Options- Warn user and wait for x min and then reboot- Reboot immediately after update- Ask user about reboot and offer to delay- Ask permission, if no response in x min reboot- Skip reboot- Do not reboot after update, send emailProcedures Pre-Update Procedure Pre-Reboot Procedure Post-Update Procedure Post-Reboot ProcedureSchedule Daily, Weekly, MonthlyBlackout Window

Alerting

New patch is available Deployment fails OS Auto Update changed Create Alarm Create Ticket Email Recipients Run a Procedure

Management

Dashboard Patch Approval Vulnerabilities List Patch History

109


of Compliance

NON-INTRUSIVE REMOTE ACCESS

General Features

Solution should be capable of remoting a managed machine

Solution should be able to set remote control policies such as Silent take control, ask permission, approve if no one is logged in, require permission, denied if no one is logged in

Solution should be able to record a remote session

Solution should be able to create multiple session of remote control

Solution should be able to access remote system without disturbing the user (background access)

Solution should be able to access the command prompt without disturbing the user

Solution should be able to access and modify the registry, services and processes without disturbing the user

Solution should be able to get audit information of the remote system without disturbing the user

Solution should be able to transfer, delete, copy file of the remote system without disturbing the user

110


of Compliance

Capability to access remote systems

without disturbing the user

Access to Command Prompt Access to Event Viewer Access to Asset Summary Access to Registry Access File Manager (Download,

Rename, Delete, Move, Copy, Upload)

Access to Task manager Access to Processes Access to Services Easy administration of users and

policies Access computers from

anywhere Password protected

REMOTE ACCESS Access computers from

anywhere Private Remote-Control Session

for Windows Shadow Support for Terminal

Server Sessions Remote Control Session is

Logged Supports Multiple Monitors Supports Keyboard Mapping and

Short-cut Secure Communications Peer to peer or relay connection Provide the end user control and

security to enable or disable remote control functions until granted approval

Screen Recording

TICKETING Accessible from a web browser Automatically creates tickets

based on alarm Use email to update end users

and receive feedback Ticketing policies Field customization

111


of Compliance

Clients can file tickets on their own

Auto assign tickets to technical personnel

Email notification of ticket status to client and technical personnel

Aging of ticketsREPORTING

Flexible Report Customization

Detailed list, table and graphic style reports

Hardware and Software Inventory

Complete Computer Changes Disk Utilization License Usage and Compliance Network Usage and Statistics Server and Workstation Uptime

History Help Desk Trouble Tickets Computer Logs and Status Schedule Reports for Automatic

Distribution Distribute automatically to

selected e-mail recipients Report for all, groups or specific

computers Detailed filtering and content

selection Add own logo Immediate viewing with

hyperlinks for quick data access Save reports with selected

parameters for reuse Saved reports can be designated

as private or shared Export report data to HTML,

Microsoft Word or ExcelADMINISTRATION

General Feature Solution should be able to limit the access to its module and visibility of machines per user

Solution should be able to be integrated to Windows Active Directory for solutions’ login access

Solution should be able to

112


of Compliance

specify its password strength and bad logon attempt policy

Solution should be able to propagate policies automatically without further user intervention once policies are assigned to machines, machine group or organization

Solution should be able to provide compliance reports of enforced securities and policies

Access Management

Multi-tenant Capable Ability to group systems Assign Admin users Ability to assign roles, scope and

groups to Admin Users Logs activities of Users using the

system Ability to access Admin system

remotely

Centralized Management

Ability to manage, monitor local and remote systems in a single console (without the need for a private connectivity).

Ability to deploy policies, monitoring definitions to both local and remote systems using a single console.

Ability to throttle bandwidth consumption used by agents and server to manage bandwidth and network traffic.

SECURITY Compliance to HIPAA and PCI Remote control sessions to end-

user machines/servers is encrypted using Transport Layer Security (TLS)

Access to the user and admin web interface is encrypted using

113


of Compliance

System Security

industry standard TLS Agent will not accept any inbound

connections, it is impossible for a third-party application to attack the agent from the network

All communication from the Agent originates from the agent outbound to the server.

Strong access control features (ability to control and manage machines is limited by both role and scope.

The Server combines passwords with unique randomly generated challenges for each attempt, hashed with SHA-256.

Protects against man-in-the-middle attacks by encrypting all communications between the agent and the server with FIPS certified 256-bit AES using a key that rolls every time the server task the agent, often multiple times per day.

There are no plain text data packers passing over the network.

Each time a technician remote administers, perform an action, or otherwise manages a system, it is logged in the system log.

Offers an optional system tray application which allows the end user to disable or enable remote control to the system.

SUPPORT

CompetencyProvider should have at least 2 Certified Administrator of the Solution proposed.

Local Support

a) 1 year of updates and supportb) 9 x 5 Phone, Onsite, E-mail and

Chat support, One (1) hour response time upon receipt of call;

Lot 3: Fiber Optic Upgrade and OSG Data Center Cabling Rehabilitation

I. Fiber Optic Upgrade – Technical Requirements and Scope of Works

114

ITEM SPECIFICATION / PARTICULAR Statement of

Compliance

1.

Supply, install/layout of single-mode, outdoor type, 4-core fiber optic cable from the existing Server Room located at 10th Floor Main Building to the Switch Cabinet (IDF) located at the 2nd Floor APMC Building.

2.

Supply, install/layout of single-mode, outdoor type, 4-core fiber optic cable from the existing Server Room located at 10th Floor of the Main Building to the Switch Cabinet (IDF) located at Ground Floor Montepino Building.

3.Supply, install/layout of 25mm dia PVC pipe including conduit support, boxes and fittings for each single mode, outdoor type, 4-core fiber optic within the building.

4.Supply, install/layout of 25mm dia PVC pipe including conduit support, boxes and fittings for each single mode, outdoor type, 4-core fiber optic within the building.

5.

For the single-mode, outdoor type, 4-core fiber optic cable layout outside the building shall be exposed via aerial and supported/attached to the existing communication cable and messenger wire using cable ties from the Main Building to the Montepino Building.

6. Supply/install fiber patch panel on both ends of the fiber optic cable using fiber fusion.

7.Test and verify all fiber connections to ensure that they comply with industry standards. Provide test results to OSG.

8. Fiber testing using Fluke tester OTDR.

9.Supply/install fiber optic patch cords to connect the passive components to the Network/active components.

10.

The contractor/bidder will be responsible for providing all materials for this project, including cable, termination hardware, patch panels, patch cables, and miscellaneous hardware.

11. The bidder must include the technical diagram as part of the technical component.

II. Server Room Rack Cable Harnessing - Technical Requirement and Scope of Works

ITE SPECIFICATION / PARTICULAR Statement of

115

M Compliance1. Cable harnessing for cables inside the racks

using cable ties and Velcro materials2. Cable tagging and labelling for cables inside the

racks3. The contractor/bidder will be responsible for

providing all materials for this project, including cable, termination hardware, patch panels, patch cables, and miscellaneous hardware.

NOTES:1. All work is to take place Monday – Friday 8am – 4pm. Weekend or

after-hours work must be coordinated with OSG in advance. 2. The Contractor is responsible for applying all the necessary permits

(e.g. MACEA). 3. The Contractor must have the appropriate licenses for working from

heights and must use ladders and harnesses appropriate to the working height.

4. The Contractor should wear personal protective equipment at all times including safety glasses, gloves, hard hat, etc.

5. The Contractor is to clean the site each day and all materials must be stored neatly in the storage area. All debris, excess materials, etc. must be picked up and the area cleaned up at the end of each day.

Conforme: _____________________________________________________________(Name/Signature)

Designation/Position: _____________________________________________________________

Company: _____________________________________________________________

Address of the Company: _____________________________________________________________

Tel. No./ E-mail Address: _____________________________________________________________

Date: _____________________________________________________________

116

Section VIII. Bidding Forms

117

TABLE OF CONTENTS

BID FORM 115-116

CONTRACT AGREEMENT FORM 119

OMNIBUS SWORN STATEMENT 120

BANK GUARANTEE FORM FOR ADVANCE PAYMENT 124

BID SECURING DECLARATION FORM ……………………………………….………………125-126

118

Bid Form

Date: Invitation to Bid1 No:

To: [name and address of Procuring Entity]

Gentlemen and/or Ladies:

Having examined the Bidding Documents including Bid Bulletin Numbers [insert numbers], the receipt of which is hereby duly acknowledged, we, the undersigned, offer to [supply/deliver/perform] [description of the Goods] in conformity with the said Bidding Documents for the sum of [total Bid amount in words and figures] or such other sums as may be ascertained in accordance with the Schedule of Prices attached herewith and made part of this Bid.

We undertake, if our Bid is accepted, to deliver the goods in accordance with the delivery schedule specified in the Schedule of Requirements.

If our Bid is accepted, we undertake to provide a performance security in the form, amounts, and within the times specified in the Bidding Documents.

We agree to abide by this Bid for the Bid Validity Period specified in BDS provision for ITB Clause 18.2 and it shall remain binding upon us and may be accepted at any time before the expiration of that period.

Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution if we are awarded the contract, are listed below:2

Name and address of agent

Amount and Currency

Purpose of Commission or gratuity

(if none, state “None”)

Until a formal Contract is prepared and executed, this Bid, together with your written acceptance thereof and your Notice of Award, shall be binding upon us.

We understand that you are not bound to accept the Lowest Calculated Bid or any Bid you may receive.

1 If ADB, JICA and WB funded projects, use IFB.2 Applicable only if the Funding Source is the ADB, JICA or WB.

119

We certify/confirm that we comply with the eligibility requirements as per ITB Clause 5 of the Bidding Documents.

We likewise certify/confirm that the undersigned, [for sole proprietorships, insert: as the owner and sole proprietor or authorized representative of Name of Bidder , has the full power and authority to participate, submit the bid, and to sign and execute the ensuing contract, on the latter’s behalf for the Name of Project of the Name of the Procuring Entity] [for partnerships, corporations, cooperatives, or joint ventures, insert: is granted full power and authority by the Name of Bidder, to participate, submit the bid, and to sign and execute the ensuing contract on the latter’s behalf for Name of Project of the Name of the Procuring Entity].

We acknowledge that failure to sign each and every page of this Bid Form, including the attached Schedule of Prices, shall be a ground for the rejection of our bid.

Dated this ________________ day of ________________ 20______.

[signature] [in the capacity of]

Duly authorized to sign Bid for and on behalf of ____________________________

120

For Goods Offered From Abroad

Name of Bidder . Invitation to Bid3 Number __ . Page of .

1 2 3 4 5 6 7 8 9Item Description Country

of origin

Quantity Unit price CIF port of

entry (specify port) or

CIP named place

(specify border point

or place of

destination)

Total CIF or

CIP price per

item

(col. 4 x 5)

Unit Price

Delivered Duty

Unpaid (DDU)

Unit price

Delivered Duty

Paid (DDP)

Total Price

delivered DDP

(col 4 x 8)



3 If ADB, JICA and WB funded projects, use IFB.

121

For Goods Offered From Within the Philippines

Name of Bidder . Invitation to Bid4 Number . Page of .

1 2 3 4 5 6 7 8 9 10Item Description Country

of origin

Quantity Unit price EXW

per item

Transportatio

n and

Insurance and

all other costs

incidental to

delivery, per

item

Sales and

other taxes

payable if

Contract is

awarded, per

item

Cost of

Incidental

Services, if

applicable, per

item

Total Price,

per unit

(col 5+6+7+8)

Total Price

delivered Final

Destination

(col 9) x (col 4)



4 If ADB, JICA and WB funded projects, use IFB.

122

Contract Agreement Form

THIS AGREEMENT made the _____ day of __________ 20_____ between [name of PROCURING ENTITY] of the Philippines (hereinafter called “the Entity”) of the one part and [name of Supplier] of [city and country of Supplier] (hereinafter called “the Supplier”) of the other part:

WHEREAS the Entity invited Bids for certain goods and ancillary services, viz., [brief description of goods and services] and has accepted a Bid by the Supplier for the supply of those goods and services in the sum of [contract price in words and figures] (hereinafter called “the Contract Price”).

NOW THIS AGREEMENT WITNESSETH AS FOLLOWS:

1. In this Agreement words and expressions shall have the same meanings as are respectively assigned to them in the Conditions of Contract referred to.

2. The following documents shall be deemed to form and be read and construed as part of this Agreement, viz.:

(a) the Supplier’s Bid, including the Technical and Financial Proposals, and all other documents/statements submitted (e.g. bidder’s response to clarifications on the bid), including corrections to the bid resulting from the Procuring Entity’s bid evaluation;

(b) the Schedule of Requirements;(c) the Technical Specifications;(d) the General Conditions of Contract;(e) the Special Conditions of Contract; (f) the Performance Security; and(g) the Entity’s Notice of Award.

3. In consideration of the payments to be made by the Entity to the Supplier as hereinafter mentioned, the Supplier hereby covenants with the Entity to provide the goods and services and to remedy defects therein in conformity in all respects with the provisions of the Contract

4. The Entity hereby covenants to pay the Supplier in consideration of the provision of the goods and services and the remedying of defects therein, the Contract Price or such other sum as may become payable under the provisions of the contract at the time and in the manner prescribed by the contract.

IN WITNESS whereof the parties hereto have caused this Agreement to be executed in accordance with the laws of the Republic of the Philippines on the day and year first above written.

Signed, sealed, delivered by the (for the Entity)

Signed, sealed, delivered by the (for the Supplier).

123

Omnibus Sworn Statement

REPUBLIC OF THE PHILIPPINES )CITY/MUNICIPALITY OF ______ ) S.S.

A F F I D A V I T

I, [Name of Affiant], of legal age, [Civil Status], [Nationality], and residing at [Address of Affiant], after having been duly sworn in accordance with law, do hereby depose and state that:

1. Select one, delete the other:

If a sole proprietorship: I am the sole proprietor or authorized representative of [Name of Bidder] with office address at [address of Bidder];

If a partnership, corporation, cooperative, or joint venture: I am the duly authorized and designated representative of [Name of Bidder] with office address at [address of Bidder];

2. Select one, delete the other:

If a sole proprietorship: As the owner and sole proprietor, or authorized representative of [Name of Bidder], I have full power and authority to do, execute and perform any and all acts necessary to participate, submit the bid, and to sign and execute the ensuing contract for [Name of the Project] of the [Name of the Procuring Entity], as shown in the attached duly notarized Special Power of Attorney;

If a partnership, corporation, cooperative, or joint venture: I am granted full power and authority to do, execute and perform any and all acts necessary to participate, submit the bid, and to sign and execute the ensuing contract for [Name of the Project] of the [Name of the Procuring Entity], as shown in the attached [state title of attached document showing proof of authorization (e.g., duly notarized Secretary’s Certificate, Board/Partnership Resolution, or Special Power of Attorney, whichever is applicable;)];

3. [Name of Bidder] is not “blacklisted” or barred from bidding by the Government of the Philippines or any of its agencies, offices, corporations, or Local Government Units, foreign government/foreign or international financing institution whose blacklisting rules have been recognized by the Government Procurement Policy Board;

4. Each of the documents submitted in satisfaction of the bidding requirements is an authentic copy of the original, complete, and all statements and information provided therein are true and correct;

124

5. [Name of Bidder] is authorizing the Head of the Procuring Entity or its duly authorized representative(s) to verify all the documents submitted;

6. Select one, delete the rest:

If a sole proprietorship: The owner or sole proprietor is not related to the Head of the Procuring Entity, members of the Bids and Awards Committee (BAC), the Technical Working Group, and the BAC Secretariat, the head of the Project Management Office or the end-user unit, and the project consultants by consanguinity or affinity up to the third civil degree;

If a partnership or cooperative: None of the officers and members of [Name of Bidder] is related to the Head of the Procuring Entity, members of the Bids and Awards Committee (BAC), the Technical Working Group, and the BAC Secretariat, the head of the Project Management Office or the end-user unit, and the project consultants by consanguinity or affinity up to the third civil degree;

If a corporation or joint venture: None of the officers, directors, and controlling stockholders of [Name of Bidder] is related to the Head of the Procuring Entity, members of the Bids and Awards Committee (BAC), the Technical Working Group, and the BAC Secretariat, the head of the Project Management Office or the end-user unit, and the project consultants by consanguinity or affinity up to the third civil degree;

7. [Name of Bidder] complies with existing labor laws and standards; and

8. [Name of Bidder] is aware of and has undertaken the following responsibilities as a Bidder:

a) Carefully examine all of the Bidding Documents;

b) Acknowledge all conditions, local or otherwise, affecting the implementation of the Contract;

c) Made an estimate of the facilities available and needed for the contract to be bid, if any; and

d) Inquire or secure Supplemental/Bid Bulletin(s) issued for the [Name of the Project].

9. [Name of Bidder] did not give or pay directly or indirectly, any commission, amount, fee, or any form of consideration, pecuniary or otherwise, to any person or official, personnel or representative of the government in relation to any procurement project or activity.

125

IN WITNESS WHEREOF, I have hereunto set my hand this __ day of ___, 20__ at ____________, Philippines.

_____________________________________________________________Bidder’s Representative/Authorized Signatory

SUBSCRIBED AND SWORN to before me this ___ day of [month] [year] at [place of execution], Philippines. Affiant/s is/are personally known to me and was/were identified by me through competent evidence of identity as defined in the 2004 Rules on Notarial Practice (A.M. No. 02-8-13-SC). Affiant/s exhibited to me his/her [insert type of government identification card used], with his/her photograph and signature appearing thereon, with no. ________ and his/her Community Tax Certificate No. _______ issued on ____ at ______.

Witness my hand and seal this ___ day of [month] [year].

NAME OF NOTARY PUBLICSerial No. of Commission _______________________Notary Public for _________ until _________________Roll of Attorneys No. ____________________________PTR No. ___________ [date issued], [place issued]IBP No. ___________ [date issued], [place issued]

Doc. No. _____Page No. _____Book No. _____Series of _____

* This form will not apply for WB funded projects.

126

Bank Guarantee Form for Advance Payment

To: [name and address of PROCURING ENTITY][name of Contract]

Gentlemen and/or Ladies:

In accordance with the payment provision included in the Special Conditions of Contract, which amends Clause 10 of the General Conditions of Contract to provide for advance payment, [name and address of Supplier] (hereinafter called the “Supplier”) shall deposit with the PROCURING ENTITY a bank guarantee to guarantee its proper and faithful performance under the said Clause of the Contract in an amount of [amount of guarantee in figures and words].

We, the [bank or financial institution], as instructed by the Supplier, agree unconditionally and irrevocably to guarantee as primary obligator and not as surety merely, the payment to the PROCURING ENTITY on its first demand without whatsoever right of objection on our part and without its first claim to the Supplier, in the amount not exceeding [amount of guarantee in figures and words].

We further agree that no change or addition to or other modification of the terms of the Contract to be performed thereunder or of any of the Contract documents which may be made between the PROCURING ENTITY and the Supplier, shall in any way release us from any liability under this guarantee, and we hereby waive notice of any such change, addition, or modification.

This guarantee shall remain valid and in full effect from the date of the advance payment received by the Supplier under the Contract until [date].

Yours truly,

Signature and seal of the Guarantors

[name of bank or financial institution]

[address]

[date]

127

BID SECURING DECLARATION FORM

REPUBLIC OF THE PHILIPPINES)CITY OF _______________________) S.S.

x------------------------------------------------------x

BID SECURING DECLARATIONInvitation to Bid: [Insert Reference number]

To: [Insert name and address of the Procuring Entity]

I/We5, the undersigned, declare that:

1. I/We understand that, according to your conditions, bids must be supported by a Bid Security, which may be in the form of a Bid-Securing Declaration.

2. I/We accept that: (a) I/we will be automatically disqualified from bidding for any contract with any procuring entity for a period of two (2) years upon receipt of your Blacklisting order; and, (b) I/we will pay the applicable fine provided under Section 6 of the Guidelines on the Use of Bid Securing Declaration, within fifteen (15) days from receipt of the written demand by the procuring entity for the commission of acts resulting to the enforcement of the bid securing declaration under Sections 23.1(b), 34.2, 40.1 and 69.1, except 69.1(f), of the IRR of RA 9184; without prejudice to other legal action the government may undertake.

3. I/We understand that this Bid Securing Declaration shall cease to be valid on the following circumstances:

(a) Upon expiration of the bid validity period, or any extension thereof pursuant to your request;

(b) I am/we are declared ineligible or post-disqualified upon receipt of your notice to such effect, and (i) I/we failed to timely file a request for reconsideration or (ii) I/we filed a waiver to avail of said right;

(c) I am/we are declared the bidder with the Lowest Calculated Responsive Bid, and I/we have furnished the performance security and signed the Contract.

5 Select one and delete the other. Adopt the same instruction for similar terms throughout the document.

128

IN WITNESS WHEREOF, I/We have hereunto set my/our hand/s this ____ day of [month] [year] at [place of execution].

[Insert NAME OF BIDDER’S AUTHORIZED

REPRESENTATIVE][Insert Signatory’s Legal Capacity]

Affiant

SUBSCRIBED AND SWORN to before me this ___ day of [month] [year] at [place of execution], Philippines. Affiant/s is/are personally known to me and was/were identified by me through competent evidence of identity as defined in the 2004 Rules on Notarial Practice (A.M. No. 02-8-13-SC). Affiant/s exhibited to me his/her [insert type of government identification card used], with his/her photograph and signature appearing thereon, with no. ________ and his/her Community Tax Certificate No. _______ issued on ____ at ______.

Witness my hand and seal this ___ day of [month] [year].

NAME OF NOTARY PUBLICSerial No. of Commission _______________________Notary Public for __________ until ________________Roll of Attorneys No. ____________________________PTR No. ___________ [date issued], [place issued]IBP No. ___________ [date issued], [place issued]

Doc. No. _____Page No. _____Book No. _____Series of _____

129

CHECKLIST OF REQUIREMENTS6

PROCUREMENT OF ICT SUBSCRIPTIONS

Bid Opening Documentary Requirements Page in Bid DocsI. ELIGIBILITY AND TECHNICAL COMPONENTS

(a) CLASS “A” DOCUMENTS

1.PhilGEPS Certificate of Registration and Membership in accordance with Section 8.5.2 of the IRR and/or:

41

i. Registration Certificate from SEC, DTI, or CDA or any proof of such registration whichever may be appropriate under existing laws of the Philippines.

ii. Mayor’s/Business permit issued by the city or municipality where the principal place of business of the prospective bidder is located.

iii. Tax Clearance per EO No. 398, s. of 2005, as finally reviewed and approved by the BIR.

2. 2.1. Statement of the prospective Bidder of all its on-going government and private contracts including contracts awarded but not yet started, if any, whether similar or not similar in nature and complexity to the contract to be bid, and

2.2 Statement of the bidder’s SLCC similar to the contract to be bid, in accordance with ITB Clause 5.4, within the relevant period as provided in the BDS.

2.3 The two (2) statements required shall indicate for each contract the following:

(a) Name of the contract;(b) Date of the contract;(c) Contract duration;(d) Owner’s name and address;(e) Kinds of Goods;(f) For Statement of On-going Contracts – amount of

contract and value of outstanding contracts;(g) For Statement of SLCC – amount of completed

contracts, adjusted by the Bidder to current prices using PSG’s consumer price index, if necessary, for the purpose of meeting the SLCC requirements;

(h) Date of delivery; and(i) End-user’s acceptance or official receipt(s) or sales

36, 41

6 This is merely a guide for the bidders, any inconsistency with the Terms of Reference/Technical Specifications and/or Bidding Forms, the latter shall prevail.

130

invoice issued for the contract, if completed, which shall be attached to the statements.

3.

NFCC computation in accordance with ITB Clause 5.5 or a committed Line of Credit from a universal or commercial bank. (Attach: latest audited financial statements stamped “received” by the BIR which should not be earlier than two (2) years from the date of bid submission).

42

CLASS “B” DOCUMENTS

1.

If applicable, the Joint Venture Agreement (JVA) in case the joint venture is already in existence, or duly notarized statements from all the potential joint venture partners in accordance with Section 23.1L(b) of the IRR.

42

(b) TECHNICAL DOCUMENTS

1.The Bid Security or Bid Securing Declaration in accordance with ITB Clause 18.

46, 125-126

2.Conformity with technical specifications, as enumerated and specified in Sections VI and VII of the Bidding Documents.

42, 92-112

3.Sworn statement in accordance with Section 25.3 of the IRR of RA 9184 and using the form prescribed in Section VIII. Bidding Forms.

42, 121-123

II. FINANCIAL COMPONENTS

1.Financial Bid, which includes Bid Prices in the prescribed Bid Form.

43, 115-116

III.POST-QUALIFICATION DOCUMENTARY REQUIREMENTS

1.

(a) Latest income and business tax returns.

a.1. Proof of VAT payments for the past six (6) months preceding the date of bid submission.

56

2.Registration Certificate from SEC, DTI or CDA or any proof of such registration whichever may be appropriate under existing laws of the Philippines

53

3.

Mayor’s/Business Permit issued by the city or municipality where the principal place of business of the prospective bidder is located, or the equivalent document for Exclusive Economic Zones or Areas.

In cases of recently expired Mayor’s/Business Permits, it shall be accepted together with the official receipt as proof that the bidder has applied for renewal within the period prescribed by the concerned local government unit, provided that the renewed permit shall be submitted as a post-qualification requirement in accordance with Section 34.2 of this IRR.

4.Tax Clearance per EO No. 398, Series of 2005, as finally reviewed and approved by the BIR.

56

131

132