PHAT - Wheel Loader Buckets - Paladin Attachments · PDF fileQC Designation Cubic Yard MP = Multi-Purpose MPWT = Multi-Purpose Wide Track Class Part Number Cubic Yard Weight 550 Available

Wheel Loader BucketsRugged. Versatile. Dependable.

JRB Buckets by Paladin lets your wheel loader haul it all. Big, brawny and built to last, our buckets handle your toughest jobs time and time again, year after year.

Whether you are looking for an everyday attachments or one to manage a specialty application, our buckets are job-site favorites and bottom-line boosters.

• Multi-purpose Buckets

• Side Dump Buckets

• Grapple Buckets

• General Purpose Buckets

• Light Material Buckets

• Refuse/Transfer Buckets

• Rock Buckets

• Roll-Out Buckets

820 Glaser Parkway, Akron, OH 44306 || PH: (800) 428.2538 ||

Wheel Loader BucketsGENERAL PURPOSE BUCKETS

• Material weight 1800 to 2500 pounds

• Sloped-bottom design allows for maximum fill capabilities and material retention

• Slope bottom increases dump angle by 5º for more efficient dumping capabilities

• Minimum 50 yield steel construction

• Minimum 400 Burnell wear areas

• Custom buckets available in sizes larger than 9.00 cubic yards

• Widths and cutting edge hole patterns drilled to OEM standard wear parts specification

• Available as pin-on or compatible with JRB’s Quick Coupler System

Class Part Number Cubic Yard Weight

250

Available in pin-on only125GP 1.25 1235 lbs.

125GPWT 1.25 1280 lbs.150GP 1.50 1435 lbs.

150GPWT 1.50 1465 lbs.

300

200GP 2.00 2025 lbs.225GP 2.25 2100 lbs.250GP 2.50 2175 lbs.275GP 2.75 2270 lbs.300GP 3.00 2400 lbs.325GP 3.25 2800 lbs.

350Available in pin-on only

200GP 2.00 1840 lbs.200GPWT 2.00 1915 lbs.

500250GP 2.50 2230 lbs.275GP 2.75 2450 lbs.300GP 3.00 2730 lbs.325GP 3.25 3150 lbs.350GP 3.50 3300 lbs.

550

Available in pin-on only225GP 2.25 2150 lbs.

225GPWT 2.25 2430 lbs.250GP 2.50 2415 lbs.

250GPWT 2.50 2700 lbs.


600 350GP 3.50 3390 lbs. 375GP 3.75 3450 lbs.400GP 4.00 3590 lbs.425GP 4.25 3685 lbs.450GP 4.50 3770 lbs.475GP 4.75 3850 lbs.


300GP 3.00 3310 lbs.325GP 3.25 3590 lbs.350GP 3.50 3700 lbs.

700450GP 4.50 3800 lbs.475GP 4.75 3975 lbs.500GP 5.00 4350 lbs.525GP 5.25 4500 lbs.550GP 5.50 4750 lbs.575GP 5.75 5050 lbs.600GP 6.00 5300 lbs.


400GP 4.00 3980 lbs.425GP 4.25 4150 lbs.

800 650GP 6.50 5800 lbs.700GP 7.00 6300 lbs.750GP 7.50 6750 lbs.

900750GP 7.50 7150 lbs.800GP 8.00 8000 lbs.850GP 8.50 8900 lbs.900GP 9.00 9625 lbs.


100 100GP 1.00 950 lbs.125GP 1.25 1005 lbs.150GP 1.50 1210 lbs.

200150GP 1.50 1490 lbs.175GP 1.75 1560 lbs.200GP 2.00 1850 lbs.225GP 2.25 2100 lbs.250GP 2.50 2170 lbs.

QC 200 GPAdapters Installed

- For Pin-On EliminateQC Designation

Cubic YardGP = General Purpose GPWT = General Purpose Wide Track

Wheel Loader Buckets

www.paladinattachments.com


• Designed for capacity of 1800 pounds per cubic yard

• Sloped-bottom design allows for maximum fill capabilities and material retention

• Slope Bottom increases dump angle by 5º for more efficient dumping capabilities

• Minimum 50 yield steel construction

• Minimum 400 Burnell wear areas

• Optional visibility spill guard available

• Widths and cutting edge hole patterns drilled to OEM standard wear parts specification


LIGHT MATERIAL BUCKETS


700

700LM 7.00 5100 lbs.750LM 7.50 5350 lbs.800LM 8.00 5700 lbs.850LM 8.50 6000 lbs.900LM 9.00 6300 lbs.950LM 9.50 6600 lbs.1000LM 10.00 6900 lbs.

800

850LM 8.50 6000 lbs.900LM 9.00 6300 lbs.950LM 9.50 6600 lbs.1000LM 10.00 6900 lbs.1050LM 10.50 7100 lbs.1100LM 11.00 7400 lbs.1150LM 11.50 7800 lbs.1200LM 12.00 8300 lbs.

9001250LM 12.50 8700 lbs.1300LM 13.00 9200 lbs.1350LM 13.50 9600 lbs.1400LM 14.00 10000 lbs.1450LM 14.50 10300 lbs.1500LM 15.00 10800 lbs.


100 150LM 1.50 1005 lbs.200LM 2.00 1180 lbs.250LM 2.50 1210 lbs.

200250LM 2.50 1700 lbs.300LM 3.00 1900 lbs.350LM 3.50 2300 lbs.400LM 4.00 2500 lbs.450LM 4.50 2800 lbs.

300350LM 3.50 2300 lbs.400LM 4.00 2500 lbs.450LM 4.50 2950 lbs. 500LM 5.00 3350 lbs.550LM 5.50 3900 lbs.



QC 700 LMAdapters Installed


Cubic Yard LM = Light Material



*Photo may not feature the most current design

— Quick Coupler attachment requires a third function jumper hose kit.

MULTI-PURPOSE BUCKETS

• Versatile in handling excavating, grappling, loading, and top dumping

• Double bottom clam floor design provides greater strength and durability

• Equipped with standard bolt-on moldboard cutting edges; heat-treated steel pins and bushings; heavy-duty hydraulic cylinders with protected hydraulic lines; and greased pivot pins

• Clam-front cutting edge drilled to OEM standard wear parts specification


• Third function loader hydraulics and jumper hose kit for Quick Coupler required for operation. Bucket supplied with attachment side whip hoses


100100MP 1.00 1525 lbs.118MP 1.13 1665 lbs.125MP 1.25 1800 lbs. 150MP 1.50 1950 lbs.

200125MP 1.25 1970 lbs.150MP 1.50 2250 lbs.175MP 1.75 2370 lbs.200MP 2.00 2490 lbs.

250

Available in pin-on only125MP 1.25 2190 lbs.

125MPWT 1.25 2250 lbs.150MP 1.50 2305 lbs.

150MPWT 1.50 2325 lbs.

300175MP 1.75 2400 lbs.200MP 2.00 2545 lbs.225MP 2.25 2780 lbs.250MP 2.50 3200 lbs.275MP 2.75 3400 lbs.

350


175MPWT 1.75 2805 lbs.200MP 2.00 2925 lbs.

200MPWT 2.00 2995 lbs.


QC 200 MPAdapters Installed


Cubic YardMP = Multi-PurposeMPWT = Multi-Purpose Wide Track


550


225MPWT 2.25 3320 lbs.250MP 2.50 3535 lbs.

250MPWT 2.50 3685 lbs.

600300MP 3.00 3900 lbs.325MP 3.25 3975 lbs.350MP 3.50 4300 lbs.375MP 3.75 4600 lbs.400MP 4.00 4700 lbs.


275MP 2.75 4295 lbs.300MP 3.00 4570 lbs.


Available in pin-on only750 375MP 3.75 6350 lbs.

800 500MP 5.00 6400 lbs.

900 Call JRB for additional size, price and availability



SIDE DUMP BUCKETS

• Designed for confined, hard-to-maneuver areas

• Supports capacity of 1 to 4 cubic yards

• Features left-hand dump function NOTE: Right-hand is available upon request

• Heavy-duty design allows for full side dumping and angle backfilling

• Side-shoot dumping angle of 45º

• Features the exclusive JRB sequence valve for lock/ unlock of the bucket cradle and side dump function

• Center mounted lift hooks are standard



• Special width available for 100 class

Class Part Number Cubic Yard Weight Width

100078SD .875 1450 lbs. 106”100SD 1.00 1595 lbs. 106”125SD 1.25 1835 lbs. 106”

JRB Bolt-on edges

200125SD 1.25 1835 lbs. 112”150SD 1.50 2210 lbs. 112”175SD 1.75 2535 lbs. 112”

JRB Bolt-on edges


JRB Bolt-on edges


JRB Bolt-on edges


JRB Bolt-on edges

700

375SD 3.75 4190 lbs. 136”400SD 4.00 4350 lbs. 136”425SD 4.25 4590 lbs. 136”450SD 4.50 4800 lbs. 136”

JRB Bolt-on edges

QC 200 SDAdapters Installed


Cubic Yard SD = Side Dump


Wheel Loader BucketsREFUSE/TRANSFER BUCKETS

• Specifically designed for use in landfill and transfer station applications

• Bucket width and edge hole pattern drilled to accept specific OEM standard wear parts

• Available in either Pushing or Loading profile designs

• Heavy-Duty round tube design visibility spillguard

• All base bucket material made from minimum 50 yield steel

• All wear areas made from minimum Burnell hardness of 400

• Refuse Buckets available as pin-on or for use with JRB Quick Coupler system

• For material weighing up to 1000 pounds per cubic yard


300400RBP 4.0 3400 lbs.400RBL 4.0 3230 lbs.500RBP 5.0 4110 lbs.500RBL 5.0 3915 lbs.




800900RBP 9.0 10260 lbs.900RBL 9.0 9300 lbs.

1000RBP 10.0 10700 lbs.1000RBL 10.0 9860 lbs.

QC 700 RBPAdapters Installed

- For Pin-On Eliminate

QC Designation

Cubic Yard

RBP = Pusher Style ProfileRBL = Loading Style Profile

Pushing Style Loading Style



GRAPPLE BUCKET/RAKES

• Efficient design for loading tires, land clearing, and trash handling

• “C”-shaped radius excretes small debris through bottom shell

• Multi-tine grapples allow for better material retention

• Dual hydraulic cylinders allow independent actuation of each cylinder for clamping uneven loads

• Optional sidebars available


• Third function loader hydraulics and jumper hose kit required for operation

GRAPPLE BUCKETS

• Profiles available in full, half-cutaway, or full-cutaway sides for any job application

• Optional screening available for maximum material retention

• Dual hydraulic cylinders allow independent actuation of each cylinder for clamping uneven loads

• Width and edge hole patterns drilled to OEM standard wear parts



Class 200 300 500 600 700A. Part Number 225GBR 300GBR 350GBR 450GBR 600GBRB. Capacity (Cubic Yard) 2.25 3.00 3.50 4.50 6.00

D. No. of Tines — 8 8 9 10“A” Maximum Opening — 74.83” 74.83” 100.89” 119.59”

“B” Minimum Opening — 28.94” 28.94” 35.32” 45.35”

“T” Tine Spacing — 13.86” 13.86” 14.14” 12.69”“W” Width — 99.00” 99.00” 113.50” 117.50” Weight — 4,693 lbs. 4,723 lbs. 7,170 lbs. 8,500 lbs.

Class Part Number

Cubic Yard Weight

100100GB 1.00 1850 lbs.125GB 1.25 1990 lbs.150GB 1.50 2150 lbs.

150GBR 1.50 2950 lbs.

200 200GB 2.00 2250 lbs.250GB 2.50 2675 lbs.

225GBR 2.25 4100 lbs.

300 250GB 2.50 2675 lbs.300GB 3.00 2950 lbs.

300GBR 3.00 4695 lbs.

500 350GB 3.50 3450 lbs.400GB 4.00 3700 lbs.

350GBR 3.50 4725 lbs.

Class Part Number

Cubic Yard Weight


400GBR 4.00 7170 lbs.450GBR 4.50 7300 lbs.

700550GB 5.50 4825 lbs.600GB 6.00 5300 lbs.

550GBR 5.50 8395 lbs.600GBR 6.00 8500 lbs.


800GBR 8.00 9600 lbs.

W

T

BA

FULL SIDE HALF SIDE CUTAWAY



• Twin, dual-cushioned cylinders increase stability

• Up to an 89% dump height improvement

• Smooth, single radius shell design allows for maximum material roll and optimal fill rates

• 93° dump angle provides maximum load placement flexibility

• JRB Quick Coupler interface is standard, Direct Pin-On available

• Integrated mesh viewing panels for better load visibility

• Jumper hoses supplied with bucket

• Sloped cylinder housing eliminates pockets for material compaction

Class Part Number Width Heaped

CapacityCutting Edge Weight

200 RO400QC 106” 4.0 yd3 92A0225 4216 lbs.RO450QC 112” 4.5 yd3 92A0259 4465 lbs.RO500QC 112” 5.0 yd3 92A0259 4714 lbs.

300RO400QC 106” 4.0 yd3 92A0225 4216 lbs.RO450QC 112” 4.5 yd3 92A0259 4465 lbs.RO500QC 112” 5.0 yd3 92A0259 4714 lbs. RO550QC 118” 5.5 yd3 92A0027 5085 lbs.RO600QC 118” 6.0 yd3 92A0027 5455 lbs.

500

RO400QC 106” 4.0 yd3 92A0225 4216 lbs.RO450QC 112” 4.5 yd3 92A0259 4465 lbs.RO500QC 112” 5.0 yd3 92A0259 4714 lbs. RO550QC 118” 5.5 yd3 92A0027 5085 lbs.RO600QC 118” 6.0 yd3 92A0027 5455 lbs.RO650QC 124” 6.5 yd3 92A0226 5635 lbs.RO700QC 124” 7.0 yd3 92A0226 5814 lbs.

600RO550QC 118” 5.5 yd3 92A0027 5085 lbs.RO600QC 118” 6.0 yd3 92A0027 5455 lbs.RO650QC 124” 6.5 yd3 92A0226 5635 lbs.RO700QC 124” 7.0 yd3 92A0226 5814 lbs.

RO 200 QC

RO - Roll-Out Cubic Yard QC = Quick Coupler PO = Pin On

Class Part Number Width Heaped

CapacityCutting Edge Weight

200 RO400PO 106” 4.0 yd3 92A0225 4666 lbs.RO450PO 112” 4.5 yd3 92A0259 4915 lbs.RO500PO 112” 5.0 yd3 92A0259 5164 lbs.

300RO400PO 106” 4.0 yd3 92A0225 4666 lbs.RO450PO 112” 4.5 yd3 92A0259 4915 lbs.RO500PO 112” 5.0 yd3 92A0259 5164 lbs. RO550PO 118” 5.5 yd3 92A0027 5535 lbs.RO600PO 118” 6.0 yd3 92A0027 5905 lbs.

500

RO400PO 106” 4.0 yd3 92A0225 4666 lbs.RO450PO 112” 4.5 yd3 92A0259 4915 lbs.RO500PO 112” 5.0 yd3 92A0259 5164 lbs. RO550PO 118” 5.5 yd3 92A0027 5535 lbs.RO600PO 118” 6.0 yd3 92A0027 5905 lbs.RO650PO 124” 6.5 yd3 92A0226 6085 lbs.RO700PO 124” 7.0 yd3 92A0226 6264 lbs.

600RO550PO 118” 5.5 yd3 92A0027 5535 lbs.RO600PO 118” 6.0 yd3 92A0027 5905 lbs.RO650PO 124” 6.5 yd3 92A0226 6085 lbs.RO700PO 124” 7.0 yd3 92A0226 6264 lbs.

HIGH LIFT, ROLL-OUT BUCKETS




Not Classed

250RST 2.50 2615 lbs.

275RST 2.75 2995 lbs.

300RST 3.00 3470 lbs.

325RST 3.25 3700 lbs.

350RST 3.50 3980 lbs.

375RST 3.75 4175 lbs.

400RST 4.00 4550 lbs.

425RST 4.25 4800 lbs.

450RST 4.50 5145 lbs.

475RST 4.75 5810 lbs.

500RST 5.00 6025 lbs.

550RST 5.50 6425 lbs.

600RST 6.00 7335 lbs.

650RST 6.50 7635 lbs.

200 RSTCubic Yard RST = Straight Edge Rock Bucket

STRAIGHT EDGE ROCK BUCKETS

• Capable of penetrating most rock applications

• 400-500 Burnell high strength, alloy steel construction

• Features heavy-duty, heat-treated cutting edges; replaceable weld-on wear pads; and heavy-duty, steel-tube-reinforced spill guards

• Available with weld-on teeth

• Width and edge pattern are drilled to OEM standard wear parts specification



Not Classed

700RST 7.00 7950 lbs.

750RST 7.50 8915 lbs.

800RST 8.00 9275 lbs.

850RST 8.50 10800 lbs.

900RST 9.00 11200 lbs.

950RST 9.50 11915 lbs.

1000RST 10.00 12615 lbs.

1050RST 10.50 12925 lbs.

1100RST 11.00 13250 lbs.

1150RST 11.50 13475 lbs.

1200RST 12.00 14320 lbs.

1250RST 12.50 14790 lbs.

1300RST 13.00 15050 lbs.

1350RST 13.50 15470 lbs.

1400RST 14.00 15900 lbs.




Not Classed

250RSP 2.50 2985 lbs.

275RSP 2.75 3395 lbs.

300RSP 3.00 3870 lbs.

325RSP 3.25 4100 lbs.

350RSP 3.50 4280 lbs.

375RSP 3.75 4575 lbs.

400RSP 4.00 4950 lbs.

425RSP 4.25 5200 lbs.

450RSP 4.50 5445 lbs.

475RSP 4.75 5810 lbs.

500RSP 5.00 6425 lbs.

550RSP 5.50 6825 lbs.

600RSP 6.00 7835 lbs.

650RSP 6.50 8135 lbs.

200 RSPCubic Yard RSP = Spade Nose Rock Bucket

SPADE NOSE ROCK BUCKETS

• Designed for handling loose rock or digging in severe applications

• Available with “V” or modified “V” style edge

• 400-500 Burnell high strength, alloy steel construction

• Standard equipped with heavy-duty, heat-treated cutting edges; replaceable weld-on wear pads; and heavy-duty, steel-tube-reinforced spill guards

• Available with weld-on teeth


Not Classed

700RSP 7.00 8450 lbs.

750RSP 7.50 9415 lbs.

800RSP 8.00 9975 lbs.

850RSP 8.50 11350 lbs.

900RSP 9.00 11865 lbs.

950RSP 9.50 12350 lbs.

1000RSP 10.00 13215 lbs.

1050RSP 10.50 13720 lbs.

1100RSP 11.00 14110 lbs.

1150RSP 11.50 14375 lbs.

1200RSP 12.00 15080 lbs.

1250RSP 12.50 15495 lbs.

1300RSP 13.00 15850 lbs.

1350RSP 13.50 16125 lbs.

1400RSP 14.00 16510 lbs.



“Paladin attachments have the durability and performance I can always count on.” Jim W., Construction Contractor

CU

STO

MER APPROVED

PALADIN BUILT



ENGINEEREDTO BE

THE BEST!

Documents

PHAT - Wheel Loader Buckets - Paladin Attachments · PDF fileQC Designation Cubic Yard MP = Multi-Purpose MPWT = Multi-Purpose Wide Track Class Part Number Cubic Yard Weight 550 Available