PFP Pipe Closer - Stormflame · 2020. 1. 21. · Ventilated drain U/U 1) Unventilated drain U/C 1) Drain w/water trap U/C 1) Not at drainage C/C 2) Pipe in closed circuit (water,

intumescent.comT: 01329 841 416 : F: 01329 841 417 : E: [email protected]

Intumescent.com : Unit 9 , The I.O Centre, Stephenson Road, Segensworth, Fareham, PO15 5RU.

www.intumescent.com

PFP Pipe CloserProduct Data Sheet

CE Marked - PFP Intumescent Pipe Closer are designed to maintain the fire resistance of fire rated walls and floors where these are breached by continuous plastic pipes.

ETA - 19-0304 | CE-0843–CPR–0498 | Revision 4 - 17th January 2020

tel:01329841416mailto:sales%40intumescent.com?subject=http://www.astroflame.com

intumescent.com

T: 01329 841 416 : F: 01329 841 417 : E: [email protected] Intumescent.com : Unit 9 , The I.O Centre, Stephenson Road,

Segensworth, Fareham, PO15 5RUwww.intumescent.com

PFP Pipe CloserCE Marked | ETA - 19-0304 | CE-0843–CPR–0498

Highlights

• CE Marked.• For pipe sizes from smallest pipes available

to Ø315 mm with a wide range of pipe wall thicknesses.

• Smaller pipes can be fitted within larger collars with the benefit of accommodating pipes that are at an angle or if the opening around the pipe is too large.

• Fire classifications up to 240 minutes for both integrity and insulation.

• Certified for PVC-U, PVC-C, PE, LDPE, MDPE, HDPE, ABS,SAN+PVC and PP pipes.

• Tested and certified for U/U pipe end applications.

• Classified for fire sealing in all types of constructions.

• Excellent sound insulation.• No emissions - environmentally and user

friendly.• Unlimited storage time (under correct

conditions).• 30 years working life guarantee.

About the PFP Pipe Closer Product

PFP Pipe Closers are designed to maintain the fire resistance of fire rated walls and floors where these are breached by continuous plastic pipes. The PFP Pipe Closer can be used in gypsum, masonry and concrete walls and with concrete floors.

Each pipe collar consists of a Red/Silver coated circular steel shell that splits in two to fit around the service penetrations by means of a simple ’slide-lock’ system.

The steel shell contains a graphite based reactive material which reacts when exposed to heat closing the openings left by the softening plastic pipe in fire.

When testing pipes, one can choose not to cap (or close) the pipe, or cap the pipe inside the furnace, or outside the furnace, or on both sides. The configuration chosen depends on the intended application of the pipe and/or the installation environment. The code defining if a pipe is capped is stated after the fire classification. For instance EI60 C/U which means the pipe was capped inside the furnace, and uncapped outside the furnace. The test configuration defines the approvals possible.


intumescent.com




Technical InformationOur suggestions for engineering judgments are:

Technical Data

Condition Ready for use, steel shell with a graphite material

Shell Powder coated 1mm steel

Conditioning procedure EN 13238:2010

Expansion ratio 17:1

Expansion pressure 65.4 N

Graphite weight 1.4 kg/m2 per mm thickness

Graphite density 1409 kg/m3

Normal expansion time Less than 2 minutes

Minimum expansiontemperature 105 °C

Durability Z2 intended for use in internal conditions with humidity classes other than Z1, excluding temperatures below 0°C.

Life Under normal conditions; 30 years +

Storage May be stored for a long period of time. To be stored in temperatures between 5˚C and 30˚C

Installation temp. +5°C to +50°C (sealant)

Colour Red/Stainless Steel shell with anthracite inlay

Intended use of pipe Pipe endcondition 4)

Rainwater pipe, plasticAt drainage U/U 1)

Not at drainage C/C 2)

Drainage or sewage pipe, plastic

Ventilated drain U/U 1)

Unventilated drain U/C 1)

Drain w/water trap U/C 1)

Not at drainage C/C 2)

Pipe in closed circuit (water, gas, air, electricity etc.) C/C 2) 3)

Flue gas recovery system pipe, plastic U/C 1)

Pipe with open ends and ≥ 50cm length on both sides, plastic U/U 2)

Pipe supported by suspension system, metalFire rated support C/U 1)

Non-fire rated U/C 1)

Waste disposal shaft pipe, metal U/C 1)

1) Suggested in EN 1366-3:2009. 2) Judgment based on tests.3) Metal pipes should have fire rated support. 4) U/U classified fire seals cover C/U, U/C and C/C. C/U classified fire seals cover U/C and C/C. U/C classified fire seals cover C/C.


intumescent.com




Product Code Product Description Size

AFPFPPC32 PFP Pipe Closer - 32mm (Depth 50mm) 32mm














Orders can be placed securely from our online shop please go to www.intumescent.com For any help or general advise please contact the team: Tel: 01329 841 416 Fax: 01329 841 417 Email: [email protected]

Product Size Availability

How to order

Please see the installation sheet - This can be requested from the team: Tel: 01329 841 416 Fax: 01329 841 417 Email: [email protected]

Installation

Please see Safety Data sheet (SDS) - This can be requested from our sales team: Tel: 01329 841 416 Fax: 01329 841 417 Email: [email protected]

Health and Safety

As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as Intumescent.com (Part of the Stormflame Group) has no control over the specific application or installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.

The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product based on the products limitation of applications and that the product is fit for purpose for their intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. Intumescent.com (Part of the Stormflame Group), disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice. If you are in any doubt as to the suitability of this product for your intended application please contact our technical team on 01329 841 416 or email [email protected] and we will contact you.
tel:01329841416mailto:sales%40intumescent.com?subject=http://www.astroflame.comhttp://www.intumescent.comtel:01329841416mailto:sales%40intumescent.com?subject=tel:01329841416mailto:sales%40intumescent.com?subject=tel:01329841416mailto:sales%40intumescent.com?subject=

Documents

PFP Pipe Closer - Stormflame · 2020. 1. 21. · Ventilated drain U/U 1) Unventilated drain U/C 1) Drain w/water trap U/C 1) Not at drainage C/C 2) Pipe in closed circuit (water,