Embed Size (px)
Citation preview
intumescent.comT: 01329 841 416 : F: 01329 841 417 : E: [email protected]
Intumescent.com : Unit 9 , The I.O Centre, Stephenson Road, Segensworth, Fareham, PO15 5RU.
www.intumescent.com
PFP FR Putty CordProduct Data Sheet
Intumescent & Acoustic Putty Cords | Non-Setting, fire protection, putty cords | The cord is hand workable & re-usable | Supplied in circular strips and are easy to fit with your thumbs; no tools required.
ETA - 19/0006 | CE-0843-CPR-0488 | Revision 3 - 21st February 2020
PFP FR Putty CordCE Marked | ETA - 19/0006 | CE-0843-CPR-0488
Page 1 intumescent.com
T: 01329 841 416 : F: 01329 841 417 : E: [email protected] Intumescent.com : Unit 9 , The I.O Centre, Stephenson Road,
Segensworth, Fareham, PO15 5RUwww.intumescent.com
Highlights
• Makes it possible to fire seal without any minimum annular width around services.
• Installation is very simple and quick; fitted in a minute.
• Installation is very simple and quick.• Gives service penetrations a high fire resistance
in dry lining partitions and masonry or concrete walls.
• Stops penetration of both cold and hot smoke.• Self-adhesive and very easy to apply without
tools.• Unaffected by moisture; can be used in wet
rooms.• Never hardens and ensures a tight fit.• Can be reshaped to other sizes if necessary.• Provides excellent sound insulation.• Environment- and user friendly; contains no
solvents or VOC’s.• Contains a low pressure intumescent for
optimal fire protection.• Working life of at least 25 years.
About the PFP FR Putty Cord Product
PFP FR Putty Cord is an easy to apply fire rated putty supplied as a non-setting cord. The cord is hand workable, re-usable and re-serviceable due to its non-setting properties, they are supplied in circular strips and are easy to fit with your thumbs; no tools required.
Fitting the putty cords will reinstate the fire rating of the partition and prevent the passage of smoke and flames in a fire and sound and air movement during service life.
The putty cord is designed to be easily fitted around service penetrations where the gap around the services is very small, or there is no gaps at all so a conventional fire rated sealant is impossible or difficult to fit due to the required depth and backing material. The putty cords are fitted covering the gap around the services and does not need to fill the gap to the required depth.
PFP FR Putty CordCE Marked | ETA - 19/0006 | CE-0843-CPR-0488
Page 2 intumescent.com
T: 01329 841 416 : F: 01329 841 417 : E: [email protected] Intumescent.com : Unit 9 , The I.O Centre, Stephenson Road,
Segensworth, Fareham, PO15 5RUwww.intumescent.com
Sound Insulation
Description Sound reductionPutty Pads for sockets Rw 67 dB
PFP FR Putty Cord has been tested at BRE (UKAS accredited); according to EN ISO 140-3:1995. Single number quantities were calculated in accordance with EN ISO 717-1:1997. The test report is available upon request.
Compound Emission rate after 3 days Emission rate after 4 weeksTVOC 190 μg/m3 12 μg/m3
TSVOC < 5 μg/m3 < 5 μg/m3
VOC w/o NIK 13 μg/m3 < 5 μg/m3
R Value 0.10 < 0.0099Formaldehyde < 3 μg/m3 < 3 μg/m3
Acetaldehyde < 3 μg/m3 < 3 μg/m3
Carcinogenic < 1 μg/m3 < 1 μg/m3
Regulation or Protocol ConclusionFrench VOC Regulation A+
French CMR components PassAgBB Pass
Belgian Regulation PassIndoor Air Comfort® Pass
Indoor Air Comfort GOLD® PassEN 717-1§ E1
BREEAM International CompliantBREEAM-NOR Pass
LEED v4 (outside U.S.) Compliant
Tested by Eurofins Product Testing; report available upon request.
Emission Data (indoor air quality)
PFP FR Putty CordCE Marked | ETA - 19/0006 | CE-0843-CPR-0488
Page 3 intumescent.com
T: 01329 841 416 : F: 01329 841 417 : E: [email protected] Intumescent.com : Unit 9 , The I.O Centre, Stephenson Road,
Segensworth, Fareham, PO15 5RUwww.intumescent.com
Orders can be placed securely from our online shop please go to www.intumescent.com For any help or general advise please contact the team: Tel: 01329 841 416 Fax: 01329 841 417 Email: [email protected]
Product Size Availability
5 x Cords per pack
How to order
Please see the installation sheet - This can be requested from the team: Tel: 01329 841 416 Fax: 01329 841 417 Email: [email protected]
Installation
Please see Safety Data sheet (SDS) - This can be requested from our sales team: Tel: 01329 841 416 Fax: 01329 841 417 Email: [email protected]
Health and Safety
Product Code Product Description Sizes
AFPFPPCO PFP FR Putty Cord 200xØ15mm
Condition Ready for use, silicone based putty
Durability/service Class Z2 : Intended for uses in internal conditions with humidity lower than 85 % RH excluding temperatures below 0°C, without exposure to rain or UV
Density 1.55 g/mlApplication temperature +4 °C to +40 °CService temperature -70 °C to +120 °CStorage Stored in temperatures between 5˚C and 30˚CWorking life Under normal conditions; 50 yearsColour RedForm Pads or cords pre-shaped to its intended usePackaging Carton boxes
Technical Data
As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as Intumescent.com (Part of the Stormflame Group) has no control over the specific application or installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.
The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product based on the products limitation of applications and that the product is fit for purpose for their intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. Intumescent.com (Part of the Stormflame Group), disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice. If you are in any doubt as to the suitability of this product for your intended application please contact our technical team on 01329 841 416 or email [email protected] and we will contact you.
